Alcatel-Lucent 5620 Service Aware Manager 13.0 R5
  Legal Disclaimers
  Customer Documentation and Product Support
  Legal Disclaimers
  Customer Documentation and Product Support
Alarm Reference
  Legal notice
    Legal notice
    Disclaimers
  Contents
  About this document
    Purpose
    Document support
    How to comment
  1. Overview
    Alarm information
      Alarm entry structure
    NE-specific alarm information
      Unspecified NE alarms
      5620 SAM platform alarms
      9471 WMM alarms
      eNodeB alarms and events
      9500 MPR alarms
      1830 PSS alarms
      External EMS alarms
    Alarm information in other formats
      Alarm information in other formats
    OSS alarm monitoring
      OSS alarm monitoring
    New alarms by 5620 SAM release
      Introduction
      Maintenance releases
      New alarms for 5620 SAM Release 13.0 R5
      New alarms for 5620 SAM Release 13.0 R4
      New alarms for 5620 SAM Release 13.0 R3
      New alarms for 5620 SAM Release 13.0 R1
  2. 5620 SAM platform
    Alarms
      Alarms
  3. Alcatel-Lucent 1830 PSS (PSS-4, PSS-8, 16/32)
    Alarms
      Alarms
  4. Alcatel-Lucent 1830 PSS (PSS-36 OCS, PSS-64 OCS)
    Alarms
      Alarms
  5. Alcatel-Lucent 5780 DSC
    Alarms
      Alarms
  6. Alcatel-Lucent 7210 SAS D
    Alarms
      Alarms
  7. Alcatel-Lucent 7210 SAS E
    Alarms
      Alarms
  8. Alcatel-Lucent 7210 SAS K
    Alarms
      Alarms
  9. Alcatel-Lucent 7210 SAS M
    Alarms
      Alarms
  10. Alcatel-Lucent 7210 SAS Mxp
    Alarms
      Alarms
  11. Alcatel-Lucent 7210 SAS R
    Alarms
      Alarms
  12. Alcatel-Lucent 7210 SAS T
    Alarms
      Alarms
  13. Alcatel-Lucent 7210 SAS X
    Alarms
      Alarms
  14. Alcatel-Lucent 7450 ESS
    Alarms
      Alarms
  15. Alcatel-Lucent 7701 CPAA
    Alarms
      Alarms
  16. Alcatel-Lucent 7705 SAR
    Alarms
      Alarms
  17. Alcatel-Lucent 7705 SAR H
    Alarms
      Alarms
  18. Alcatel-Lucent 7710 SR
    Alarms
      Alarms
  19. Alcatel-Lucent 7750 SR
    Alarms
      Alarms
  20. Alcatel-Lucent 7750 SR MG
    Alarms
      Alarms
  21. Alcatel-Lucent 7850 VSG
    Alarms
      Alarms
  22. Alcatel-Lucent 7850 VSA-8
    Alarms
      Alarms
  23. Alcatel-Lucent 7950 XRS
    Alarms
      Alarms
  24. Alcatel-Lucent 8000 MDR
    Alarms
      Alarms
  25. Alcatel-Lucent 936x/996x SmallCell access point
    Alarms
      Alarms
  26. Alcatel-Lucent 9471 WMM
    Alarms
      Alarms
  27. Alcatel-Lucent 9500 MPR
    Alarms
      Alarms
  28. Alcatel-Lucent 9500 MPRe
    Alarms
      Alarms
  29. Alcatel-Lucent 9774 LMG
    Alarms
      Alarms
  30. Alcatel-Lucent 9966 MS GW
    Alarms
      Alarms
  31. Alcatel-Lucent 9xxx eNodeB
    Alarms
      Alarms
  32. Alcatel-Lucent OS10K
    Alarms
      Alarms
  33. Alcatel-Lucent OS6250
    Alarms
      Alarms
  34. Alcatel-Lucent OS6400
    Alarms
      Alarms
  35. Alcatel-Lucent OS6450
    Alarms
      Alarms
  36. Alcatel-Lucent OS6850/6850E
    Alarms
      Alarms
  37. Alcatel-Lucent OS6855
    Alarms
      Alarms
  38. Alcatel-Lucent OS6900
    Alarms
      Alarms
  39. Alcatel-Lucent OS9600
    Alarms
      Alarms
  40. Alcatel-Lucent OS9700
    Alarms
      Alarms
  41. Alcatel-Lucent OS9700E/9800E
    Alarms
      Alarms
  42. Alcatel-Lucent OS9800
    Alarms
      Alarms
  43. Alcatel-Lucent VSC
    Alarms
      Alarms
  44. Unspecified NE
    Alarms
      Alarms
  Legal notice
    Legal notice
    Disclaimers
  Contents
  About this document
    Purpose
    Document support
    How to comment
  1. Overview
    Alarm information
      Alarm entry structure
    NE-specific alarm information
      Unspecified NE alarms
      5620 SAM platform alarms
      9471 WMM alarms
      eNodeB alarms and events
      9500 MPR alarms
      1830 PSS alarms
      External EMS alarms
    Alarm information in other formats
      Alarm information in other formats
    OSS alarm monitoring
      OSS alarm monitoring
    New alarms by 5620 SAM release
      Introduction
      Maintenance releases
      New alarms for 5620 SAM Release 13.0 R5
      New alarms for 5620 SAM Release 13.0 R4
      New alarms for 5620 SAM Release 13.0 R3
      New alarms for 5620 SAM Release 13.0 R1
  2. 5620 SAM platform
    Alarms
      Alarms
  3. Alcatel-Lucent 1830 PSS (PSS-4, PSS-8, 16/32)
    Alarms
      Alarms
  4. Alcatel-Lucent 1830 PSS (PSS-36 OCS, PSS-64 OCS)
    Alarms
      Alarms
  5. Alcatel-Lucent 5780 DSC
    Alarms
      Alarms
  6. Alcatel-Lucent 7210 SAS D
    Alarms
      Alarms
  7. Alcatel-Lucent 7210 SAS E
    Alarms
      Alarms
  8. Alcatel-Lucent 7210 SAS K
    Alarms
      Alarms
  9. Alcatel-Lucent 7210 SAS M
    Alarms
      Alarms
  10. Alcatel-Lucent 7210 SAS Mxp
    Alarms
      Alarms
  11. Alcatel-Lucent 7210 SAS R
    Alarms
      Alarms
  12. Alcatel-Lucent 7210 SAS T
    Alarms
      Alarms
  13. Alcatel-Lucent 7210 SAS X
    Alarms
      Alarms
  14. Alcatel-Lucent 7450 ESS
    Alarms
      Alarms
  15. Alcatel-Lucent 7701 CPAA
    Alarms
      Alarms
  16. Alcatel-Lucent 7705 SAR
    Alarms
      Alarms
  17. Alcatel-Lucent 7705 SAR H
    Alarms
      Alarms
  18. Alcatel-Lucent 7710 SR
    Alarms
      Alarms
  19. Alcatel-Lucent 7750 SR
    Alarms
      Alarms
  20. Alcatel-Lucent 7750 SR MG
    Alarms
      Alarms
  21. Alcatel-Lucent 7850 VSG
    Alarms
      Alarms
  22. Alcatel-Lucent 7850 VSA-8
    Alarms
      Alarms
  23. Alcatel-Lucent 7950 XRS
    Alarms
      Alarms
  24. Alcatel-Lucent 8000 MDR
    Alarms
      Alarms
  25. Alcatel-Lucent 936x/996x SmallCell access point
    Alarms
      Alarms
  26. Alcatel-Lucent 9471 WMM
    Alarms
      Alarms
  27. Alcatel-Lucent 9500 MPR
    Alarms
      Alarms
  28. Alcatel-Lucent 9500 MPRe
    Alarms
      Alarms
  29. Alcatel-Lucent 9774 LMG
    Alarms
      Alarms
  30. Alcatel-Lucent 9966 MS GW
    Alarms
      Alarms
  31. Alcatel-Lucent 9xxx eNodeB
    Alarms
      Alarms
  32. Alcatel-Lucent OS10K
    Alarms
      Alarms
  33. Alcatel-Lucent OS6250
    Alarms
      Alarms
  34. Alcatel-Lucent OS6400
    Alarms
      Alarms
  35. Alcatel-Lucent OS6450
    Alarms
      Alarms
  36. Alcatel-Lucent OS6850/6850E
    Alarms
      Alarms
  37. Alcatel-Lucent OS6855
    Alarms
      Alarms
  38. Alcatel-Lucent OS6900
    Alarms
      Alarms
  39. Alcatel-Lucent OS9600
    Alarms
      Alarms
  40. Alcatel-Lucent OS9700
    Alarms
      Alarms
  41. Alcatel-Lucent OS9700E/9800E
    Alarms
      Alarms
  42. Alcatel-Lucent OS9800
    Alarms
      Alarms
  43. Alcatel-Lucent VSC
    Alarms
      Alarms
  44. Unspecified NE
    Alarms
      Alarms
Glossary
  Legal notice
    Legal notice
    Disclaimers
  Contents
  About this document
    Purpose
    Document support
  Glossary
    Numerics
    A
    B
    C
    D
    E
    F
    G
    H
    I
    J
    K
    L
    M
    N
    O
    P
    Q
    R
    S
    T
    U
    V
    W
    X
    Z
  Legal notice
    Legal notice
    Disclaimers
  Contents
  About this document
    Purpose
    Document support
  Glossary
    Numerics
    A
    B
    C
    D
    E
    F
    G
    H
    I
    J
    K
    L
    M
    N
    O
    P
    Q
    R
    S
    T
    U
    V
    W
    X
    Z
Installation and Upgrade Guide
  About this document
    Legal information
    Contacts
    Part numbers
  Installation and Upgrade Guide
    Getting started
      1 - Before you begin
        1.1 Overview
          Guide conventions
          Platform support
          samadmin user
          System migration from obsolete platforms
        1.2 Special upgrade requirements
          Disk space requirements
        1.3 Virtualization support
          5620 SAM server and database requirements and restrictions
          Client requirements and restrictions
          Additional element manager requirements and restrictions
        1.4 Deployment restrictions
          Network restrictions
          Platform restrictions
          Security restrictions
          Software restrictions
        1.5 Deployment requirements
          Network requirements
          Platform requirements
          Security requirements
          Software requirements
          Procedure 1-1 To obtain the system ID of a station for 5620 SAM or 5650 CPAM license acquisition
        1.6 Automated client installation, upgrade, and configuration
          Client software upgrades
          Client configuration changes
          Considerations and restrictions
      2 - RHEL OS configuration
        2.1 Overview
        2.2 OS configuration restrictions
        2.3 OS configuration requirements
          Firewall requirements
          Procedure 2-1 To prepare disk partitions for 5620 SAM installation
          Procedure 2-2 To reset the disk partition reserved block counts
        2.4 RHEL OS package groups and packages
          Package installation method
          Server and database packages
          Client and client delegate server packages
      3 - RHEL disk configuration
        3.1 Overview
          Procedure 3-1 To configure a 5620 SAM disk partition created after the RHEL OS installation
        3.2 Using RAID with the 5620 SAM
        3.3 Logical disk management
        3.4 Disk partitioning for trial deployments
        3.5 Disk partitioning for live deployments
      4 - Configuring SSL security
        4.1 Overview
          GUI client and main server communication
          Managing SSL certificate expiry
        4.2 Workflow to configure SSL
        4.3 SSL security configuration
          Procedure 4-1 To prepare a 5620 SAM system for SSL
          Procedure 4-2 To enable SSL on a main server
          Procedure 4-3 To enable SSL on an auxiliary server
          Procedure 4-4 To disable SSL on a RHEL single-user client or client delegate server
          Procedure 4-5 To disable SSL on a Windows single-user client or client delegate server
          Procedure 4-6 To enable SSL and HTTPS for an OSS client
          Procedure 4-7 To enable SSL and HTTPS on a Cflowd auxiliary server
      5 - Configuring Small Cell management
        5.1 Overview
        5.2 Migration from SCMS
        5.3 HDM installation and configuration
        5.4 Small Cell management configuration
          Procedure 5-1 To enable Small Cell management
    5620 SAM system deployment
      6 - 5620 SAM installation
        6.1 Overview
        6.2 5620 SAM installation procedures list
        6.3 Standalone system installation workflow
        6.4 Standalone system installation
          Procedure 6-1 To install a standalone 5620 SAM system
        6.5 Redundant system installation workflow
        6.6 Redundant system installation
          Procedure 6-2 To install a redundant 5620 SAM system
        6.7 Auxiliary server installation
          Procedure 6-3 To install a 5620 SAM auxiliary server
          Procedure 6-4 To add an auxiliary server to a 5620 SAM system
        6.8 Cflowd auxiliary server installation
          Procedure 6-5 To install a 5620 SAM Cflowd auxiliary server
          Procedure 6-6 To configure Cflowd auxiliary server communication
      7 - 5620 SAM upgrade
        7.1 Overview
        7.2 5620 SAM upgrade procedures list
        7.3 5620 SAM system upgrade preparation
          Procedure 7-1 To perform the pre-upgrade tasks
        7.4 Standalone system upgrade workflow
        7.5 Standalone system upgrade
          Procedure 7-2 To upgrade a standalone 5620 SAM system
        7.6 Redundant system upgrade workflow
        7.7 Redundant system upgrade
          Procedure 7-3 To upgrade a redundant 5620 SAM system
        7.8 Auxiliary server upgrade
          Procedure 7-4 To upgrade a 5620 SAM auxiliary server
        7.9 Cflowd auxiliary server upgrade
          Procedure 7-5 To upgrade a 5620 SAM Cflowd auxiliary server
      8 - 5620 SAM conversion to redundancy
        8.1 Overview
        8.2 Conversion to redundancy procedures list
        8.3 Conversion to redundancy workflow
        8.4 Conversion to redundancy
          Procedure 8-1 To convert a standalone 5620 SAM system to a redundant system
      9 - 5620 SAM conversion to IPv6
        9.1 Overview
        9.2 Conversion to IPv6 procedures list
        9.3 Conversion to IPv6 workflow
        9.4 Conversion to IPv6 preparation
          Procedure 9-1 To perform the pre-conversion tasks
        9.5 Standalone system conversion to IPv6
          Procedure 9-2 To convert a standalone 5620 SAM system to IPv6
        9.6 Redundant system conversion to IPv6
          Procedure 9-3 To convert a redundant 5620 SAM system to IPV6
      10 - 5620 SAM uninstallation
        10.1 Overview
        10.2 System uninstallation procedures list
        10.3 System uninstallation workflow
        10.4 System uninstallation
          Procedure 10-1 To uninstall the 5620 SAM auxiliary server software
          Procedure 10-2 To uninstall the Cflowd auxiliary server software
          Procedure 10-3 To uninstall the 5620 SAM main server software
          Procedure 10-4 To uninstall the 5620 SAM database software
    5650 CPAM system deployment
      11 - 5650 CPAM installation
        11.1 Overview
        11.2 5650 CPAM installation procedures list
        11.3 5650 CPAM installation
          Procedure 11-1 To install a standalone 5650 CPAM system
          Procedure 11-2 To install a redundant 5650 CPAM system
      12 - 5650 CPAM upgrade
        12.1 Overview
        12.2 5650 CPAM upgrade procedures list
        12.3 5650 CPAM upgrade
          Procedure 12-1 To upgrade a standalone 5650 CPAM system
          Procedure 12-2 To upgrade a redundant 5650 CPAM system
      13 - 5650 CPAM uninstallation
        13.1 Overview
        13.2 5650 CPAM uninstallation procedures list
        13.3 5650 CPAM uninstallation
          Procedure 13-1 To uninstall the 5650 CPAM software
    5620 SAM | 5650 CPAM client deployment
      14 - Single-user GUI client deployment
        14.1 Overview
          Platform requirements
          Security requirements
          Procedure 14-1 To install the Oracle JRE on a RHEL client station
        14.2 Single-user client deployment procedures list
        14.3 Single-user client installation
          Procedure 14-2 To install a single-user client on RHEL using a web browser
          Procedure 14-3 To install a single-user client on RHEL using the client installer
          Procedure 14-4 To install a single-user client on Windows using a web browser
          Procedure 14-5 To install a single-user client on Windows using the client installer
        14.4 Single-user client upgrade
          Procedure 14-6 To upgrade a single-user client on RHEL
          Procedure 14-7 To upgrade a single-user client on Windows
        14.5 Single-user client uninstallation
          Procedure 14-8 To uninstall a RHEL single-user client using a web browser
          Procedure 14-9 To uninstall a RHEL single-user client using the client uninstaller
          Procedure 14-10 To uninstall a Windows single-user client using a web browser
          Procedure 14-11 To uninstall a Windows single-user client using an OS utility
      15 - Client delegate server deployment
        15.1 Overview
          Platform requirements
          Security requirements
        15.2 Client delegate server deployment procedures list
        15.3 Client delegate server installation
          Procedure 15-1 To install a client delegate server on RHEL
          Procedure 15-2 To install a client delegate server on Windows
          Procedure 15-3 To add a client delegate server to an existing system
        15.4 Client delegate server upgrade
          Procedure 15-4 To upgrade a client delegate server on RHEL
          Procedure 15-5 To upgrade a client delegate server on Windows
        15.5 Client delegate server uninstallation
          Procedure 15-6 To uninstall a RHEL client delegate server
          Procedure 15-7 To uninstall a Windows client delegate server
    Appendices
      A. 5620 SAM installation parameters
        A.1 Standalone database and main server installation parameters
        A.2 Redundant database and main server installation parameters
        A.3 Auxiliary server installation parameters
        A.4 Single-user client and client delegate server installation parameters
      B. 5620 SAM upgrade parameters
        B.1 Standalone database and main server upgrade parameters
        B.2 Redundant database and main server upgrade parameters
        B.3 Auxiliary server upgrade parameters
      C. 5620 SAM conversion to redundancy parameters
        C.1 5620 SAM conversion to redundancy parameters
      D. 5650 CPAM installation parameters
        D.1 5650 CPAM installation parameters
      E. 5650 CPAM upgrade parameters
        E.1 5650 CPAM upgrade parameters
  About this document
    Legal information
    Contacts
    Part numbers
  Installation and Upgrade Guide
    Getting started
      1 - Before you begin
        1.1 Overview
          Guide conventions
          Platform support
          samadmin user
          System migration from obsolete platforms
        1.2 Special upgrade requirements
          Disk space requirements
        1.3 Virtualization support
          5620 SAM server and database requirements and restrictions
          Client requirements and restrictions
          Additional element manager requirements and restrictions
        1.4 Deployment restrictions
          Network restrictions
          Platform restrictions
          Security restrictions
          Software restrictions
        1.5 Deployment requirements
          Network requirements
          Platform requirements
          Security requirements
          Software requirements
          Procedure 1-1 To obtain the system ID of a station for 5620 SAM or 5650 CPAM license acquisition
        1.6 Automated client installation, upgrade, and configuration
          Client software upgrades
          Client configuration changes
          Considerations and restrictions
      2 - RHEL OS configuration
        2.1 Overview
        2.2 OS configuration restrictions
        2.3 OS configuration requirements
          Firewall requirements
          Procedure 2-1 To prepare disk partitions for 5620 SAM installation
          Procedure 2-2 To reset the disk partition reserved block counts
        2.4 RHEL OS package groups and packages
          Package installation method
          Server and database packages
          Client and client delegate server packages
      3 - RHEL disk configuration
        3.1 Overview
          Procedure 3-1 To configure a 5620 SAM disk partition created after the RHEL OS installation
        3.2 Using RAID with the 5620 SAM
        3.3 Logical disk management
        3.4 Disk partitioning for trial deployments
        3.5 Disk partitioning for live deployments
      4 - Configuring SSL security
        4.1 Overview
          GUI client and main server communication
          Managing SSL certificate expiry
        4.2 Workflow to configure SSL
        4.3 SSL security configuration
          Procedure 4-1 To prepare a 5620 SAM system for SSL
          Procedure 4-2 To enable SSL on a main server
          Procedure 4-3 To enable SSL on an auxiliary server
          Procedure 4-4 To disable SSL on a RHEL single-user client or client delegate server
          Procedure 4-5 To disable SSL on a Windows single-user client or client delegate server
          Procedure 4-6 To enable SSL and HTTPS for an OSS client
          Procedure 4-7 To enable SSL and HTTPS on a Cflowd auxiliary server
      5 - Configuring Small Cell management
        5.1 Overview
        5.2 Migration from SCMS
        5.3 HDM installation and configuration
        5.4 Small Cell management configuration
          Procedure 5-1 To enable Small Cell management
    5620 SAM system deployment
      6 - 5620 SAM installation
        6.1 Overview
        6.2 5620 SAM installation procedures list
        6.3 Standalone system installation workflow
        6.4 Standalone system installation
          Procedure 6-1 To install a standalone 5620 SAM system
        6.5 Redundant system installation workflow
        6.6 Redundant system installation
          Procedure 6-2 To install a redundant 5620 SAM system
        6.7 Auxiliary server installation
          Procedure 6-3 To install a 5620 SAM auxiliary server
          Procedure 6-4 To add an auxiliary server to a 5620 SAM system
        6.8 Cflowd auxiliary server installation
          Procedure 6-5 To install a 5620 SAM Cflowd auxiliary server
          Procedure 6-6 To configure Cflowd auxiliary server communication
      7 - 5620 SAM upgrade
        7.1 Overview
        7.2 5620 SAM upgrade procedures list
        7.3 5620 SAM system upgrade preparation
          Procedure 7-1 To perform the pre-upgrade tasks
        7.4 Standalone system upgrade workflow
        7.5 Standalone system upgrade
          Procedure 7-2 To upgrade a standalone 5620 SAM system
        7.6 Redundant system upgrade workflow
        7.7 Redundant system upgrade
          Procedure 7-3 To upgrade a redundant 5620 SAM system
        7.8 Auxiliary server upgrade
          Procedure 7-4 To upgrade a 5620 SAM auxiliary server
        7.9 Cflowd auxiliary server upgrade
          Procedure 7-5 To upgrade a 5620 SAM Cflowd auxiliary server
      8 - 5620 SAM conversion to redundancy
        8.1 Overview
        8.2 Conversion to redundancy procedures list
        8.3 Conversion to redundancy workflow
        8.4 Conversion to redundancy
          Procedure 8-1 To convert a standalone 5620 SAM system to a redundant system
      9 - 5620 SAM conversion to IPv6
        9.1 Overview
        9.2 Conversion to IPv6 procedures list
        9.3 Conversion to IPv6 workflow
        9.4 Conversion to IPv6 preparation
          Procedure 9-1 To perform the pre-conversion tasks
        9.5 Standalone system conversion to IPv6
          Procedure 9-2 To convert a standalone 5620 SAM system to IPv6
        9.6 Redundant system conversion to IPv6
          Procedure 9-3 To convert a redundant 5620 SAM system to IPV6
      10 - 5620 SAM uninstallation
        10.1 Overview
        10.2 System uninstallation procedures list
        10.3 System uninstallation workflow
        10.4 System uninstallation
          Procedure 10-1 To uninstall the 5620 SAM auxiliary server software
          Procedure 10-2 To uninstall the Cflowd auxiliary server software
          Procedure 10-3 To uninstall the 5620 SAM main server software
          Procedure 10-4 To uninstall the 5620 SAM database software
    5650 CPAM system deployment
      11 - 5650 CPAM installation
        11.1 Overview
        11.2 5650 CPAM installation procedures list
        11.3 5650 CPAM installation
          Procedure 11-1 To install a standalone 5650 CPAM system
          Procedure 11-2 To install a redundant 5650 CPAM system
      12 - 5650 CPAM upgrade
        12.1 Overview
        12.2 5650 CPAM upgrade procedures list
        12.3 5650 CPAM upgrade
          Procedure 12-1 To upgrade a standalone 5650 CPAM system
          Procedure 12-2 To upgrade a redundant 5650 CPAM system
      13 - 5650 CPAM uninstallation
        13.1 Overview
        13.2 5650 CPAM uninstallation procedures list
        13.3 5650 CPAM uninstallation
          Procedure 13-1 To uninstall the 5650 CPAM software
    5620 SAM | 5650 CPAM client deployment
      14 - Single-user GUI client deployment
        14.1 Overview
          Platform requirements
          Security requirements
          Procedure 14-1 To install the Oracle JRE on a RHEL client station
        14.2 Single-user client deployment procedures list
        14.3 Single-user client installation
          Procedure 14-2 To install a single-user client on RHEL using a web browser
          Procedure 14-3 To install a single-user client on RHEL using the client installer
          Procedure 14-4 To install a single-user client on Windows using a web browser
          Procedure 14-5 To install a single-user client on Windows using the client installer
        14.4 Single-user client upgrade
          Procedure 14-6 To upgrade a single-user client on RHEL
          Procedure 14-7 To upgrade a single-user client on Windows
        14.5 Single-user client uninstallation
          Procedure 14-8 To uninstall a RHEL single-user client using a web browser
          Procedure 14-9 To uninstall a RHEL single-user client using the client uninstaller
          Procedure 14-10 To uninstall a Windows single-user client using a web browser
          Procedure 14-11 To uninstall a Windows single-user client using an OS utility
      15 - Client delegate server deployment
        15.1 Overview
          Platform requirements
          Security requirements
        15.2 Client delegate server deployment procedures list
        15.3 Client delegate server installation
          Procedure 15-1 To install a client delegate server on RHEL
          Procedure 15-2 To install a client delegate server on Windows
          Procedure 15-3 To add a client delegate server to an existing system
        15.4 Client delegate server upgrade
          Procedure 15-4 To upgrade a client delegate server on RHEL
          Procedure 15-5 To upgrade a client delegate server on Windows
        15.5 Client delegate server uninstallation
          Procedure 15-6 To uninstall a RHEL client delegate server
          Procedure 15-7 To uninstall a Windows client delegate server
    Appendices
      A. 5620 SAM installation parameters
        A.1 Standalone database and main server installation parameters
        A.2 Redundant database and main server installation parameters
        A.3 Auxiliary server installation parameters
        A.4 Single-user client and client delegate server installation parameters
      B. 5620 SAM upgrade parameters
        B.1 Standalone database and main server upgrade parameters
        B.2 Redundant database and main server upgrade parameters
        B.3 Auxiliary server upgrade parameters
      C. 5620 SAM conversion to redundancy parameters
        C.1 5620 SAM conversion to redundancy parameters
      D. 5650 CPAM installation parameters
        D.1 5650 CPAM installation parameters
      E. 5650 CPAM upgrade parameters
        E.1 5650 CPAM upgrade parameters
Integration Guide
  Legal notice
    Legal notice
    Disclaimers
  Contents
  About this document
    Purpose
    Safety information
    Document support
    How to comment
  1. Safety information
    Structure of safety statements
      Overview
      General structure
      Signal words
  2. 5620 SAM integration overview
    Purpose
    Integration overview
      Integration with other systems
      Integration with Single Sign On
      Integration with Chronos SyncWatch
  3. 5620 SAM integration with other systems
    Purpose
    5620 SAM and 5650 CPAM integration
      General Information
      5650 CPAM deployment
    Workflow for 5620 SAM and 5650 CPAM integration
      Process
    5620 SAM and 5650 CPAM integration procedures
      General Information
    Procedure 3-1: To add the 5650 CPAM to a 5620 SAM system
      Purpose
      Steps
    5620 SAM and 5620 NM integration
      General Information
      Before you start
      5620 SAM client GUI startup and navigation restrictions
    Workflow for 5620 SAM and 5620 NM integration
      Process
    5620 SAM and 5620 NM integration procedures
      General Information
    Procedure 3-2: To configure 5620 SAM and 5620 NM GUI integration
      Purpose
      Steps
    Procedure 3-3: To enable navigation from external systems on a 5620 SAM main server
      Steps
    Procedure 3-4: To start the 5620 NM GUI
      Steps
    Procedure 3-5: To navigate from the 5620 NM AS tool USM to the 5620 SAM client GUI
      Purpose
      Steps
    5620 SAM and 9959 NPO integration
      General Information
      9959 NPO redundancy
      File transfer between the 5620 SAM and the 9959 NPO
      East-West licensing for the 9959 NPO
    5620 SAM and 9959 NPO integration procedures
      General Information
    Procedure 3-6: To discover the 9959 NPO as an EM system
      Steps
    Procedure 3-7: To unmanage and delete the 9959 NPO from the 5620 SAM network
      Steps
    5620 SAM and EM systems integration
      General Information
    5620 SAM and 5670 RAM integration
      General Information
    Procedure 3-8: To enable 5670 RAM support
      Purpose
      Steps
    5620 SAM and 9952 WPS integration
      File transfer between the 5620 SAM and the 9952 WPS
    Procedure 3-9: To view WebDAV activation status on a 5620 SAM main server
      Purpose
      Steps
    5620 SAM and 5780 DSC integration
      General Information
    5620 SAM and 5520 AMS integration
      General Information
    Call trace data transfer to the 9958 WTA
      General Information
  4. 5620 SAM integration with Single Sign On
    Purpose
    Procedure 4-1: To configure 5620 SAM and SANE portal integration
      Purpose
      Steps
  5. 5620 SAM integration with Chronos SyncWatch
    Purpose
    Synchronization overview
      General Information
      Clocks
      Network synchronization
      Primary reference clocks
      Secondary clocks
      Monitoring synchronization
    5620 SAM and Chronos SyncWatch
      Integration overview
    Alarm support
      General Information
    Platform and software requirements
      General Information
    Sample network
      Components
    Workflow for scripted SyncWatch integration
      General Information
      Process
    Verify SNMP and user configurations
      Verification procedures
    Procedure 5-1: Verify 5620 SAM SNMP communications to the NetSMART Server
      Purpose
      Steps
    Procedure 5-2: Verify 5620 SAM SNMP communications to the SyncWatch Probes
      Purpose
      Steps
    Chronos SyncWatch script bundle execution
      General Information
    Procedure 5-3: To import the SyncWatch script bundle
      Steps
    Procedure 5-4: To execute the SyncWatch script bundle
      Steps
    NetSMART Server cross-launch mechanism
      General Information
    Procedure 5-5: To perform a NetSMART Server cross-launch
      Steps
    NetSMART Server and SyncWatch Probe in the 5620 SAM
      General Information
      NetSMART Server
      SyncWatch Probe
    Procedure 5-6: To configure a physical link
      Steps
    Workflow for manual SyncWatch integration
      General Information
      Process
    Manual SyncWatch Probe integration
      General Information
  Legal notice
    Legal notice
    Disclaimers
  Contents
  About this document
    Purpose
    Safety information
    Document support
    How to comment
  1. Safety information
    Structure of safety statements
      Overview
      General structure
      Signal words
  2. 5620 SAM integration overview
    Purpose
    Integration overview
      Integration with other systems
      Integration with Single Sign On
      Integration with Chronos SyncWatch
  3. 5620 SAM integration with other systems
    Purpose
    5620 SAM and 5650 CPAM integration
      General Information
      5650 CPAM deployment
    Workflow for 5620 SAM and 5650 CPAM integration
      Process
    5620 SAM and 5650 CPAM integration procedures
      General Information
    Procedure 3-1: To add the 5650 CPAM to a 5620 SAM system
      Purpose
      Steps
    5620 SAM and 5620 NM integration
      General Information
      Before you start
      5620 SAM client GUI startup and navigation restrictions
    Workflow for 5620 SAM and 5620 NM integration
      Process
    5620 SAM and 5620 NM integration procedures
      General Information
    Procedure 3-2: To configure 5620 SAM and 5620 NM GUI integration
      Purpose
      Steps
    Procedure 3-3: To enable navigation from external systems on a 5620 SAM main server
      Steps
    Procedure 3-4: To start the 5620 NM GUI
      Steps
    Procedure 3-5: To navigate from the 5620 NM AS tool USM to the 5620 SAM client GUI
      Purpose
      Steps
    5620 SAM and 9959 NPO integration
      General Information
      9959 NPO redundancy
      File transfer between the 5620 SAM and the 9959 NPO
      East-West licensing for the 9959 NPO
    5620 SAM and 9959 NPO integration procedures
      General Information
    Procedure 3-6: To discover the 9959 NPO as an EM system
      Steps
    Procedure 3-7: To unmanage and delete the 9959 NPO from the 5620 SAM network
      Steps
    5620 SAM and EM systems integration
      General Information
    5620 SAM and 5670 RAM integration
      General Information
    Procedure 3-8: To enable 5670 RAM support
      Purpose
      Steps
    5620 SAM and 9952 WPS integration
      File transfer between the 5620 SAM and the 9952 WPS
    Procedure 3-9: To view WebDAV activation status on a 5620 SAM main server
      Purpose
      Steps
    5620 SAM and 5780 DSC integration
      General Information
    5620 SAM and 5520 AMS integration
      General Information
    Call trace data transfer to the 9958 WTA
      General Information
  4. 5620 SAM integration with Single Sign On
    Purpose
    Procedure 4-1: To configure 5620 SAM and SANE portal integration
      Purpose
      Steps
  5. 5620 SAM integration with Chronos SyncWatch
    Purpose
    Synchronization overview
      General Information
      Clocks
      Network synchronization
      Primary reference clocks
      Secondary clocks
      Monitoring synchronization
    5620 SAM and Chronos SyncWatch
      Integration overview
    Alarm support
      General Information
    Platform and software requirements
      General Information
    Sample network
      Components
    Workflow for scripted SyncWatch integration
      General Information
      Process
    Verify SNMP and user configurations
      Verification procedures
    Procedure 5-1: Verify 5620 SAM SNMP communications to the NetSMART Server
      Purpose
      Steps
    Procedure 5-2: Verify 5620 SAM SNMP communications to the SyncWatch Probes
      Purpose
      Steps
    Chronos SyncWatch script bundle execution
      General Information
    Procedure 5-3: To import the SyncWatch script bundle
      Steps
    Procedure 5-4: To execute the SyncWatch script bundle
      Steps
    NetSMART Server cross-launch mechanism
      General Information
    Procedure 5-5: To perform a NetSMART Server cross-launch
      Steps
    NetSMART Server and SyncWatch Probe in the 5620 SAM
      General Information
      NetSMART Server
      SyncWatch Probe
    Procedure 5-6: To configure a physical link
      Steps
    Workflow for manual SyncWatch integration
      General Information
      Process
    Manual SyncWatch Probe integration
      General Information
MPR User Guide
  About this document
    Legal information
    Contacts
    Part numbers
  MPR User Guide
    Getting started
      1 - What's new?
        1.1 What's new in 5620 SAM Release 13.0 for 9500 MPR and 9500 MPRe devices
          Maintenance releases
          What's new in 5620 SAM Release 13.0 R3
      2 - 9500 MPR/9500 MPRe overview
        2.1 5620 SAM management of 9500 MPR/9500 MPRe devices
          Supported device objects, auxiliary equipment, and service types
          Supported MSS types
          MSS-O
          IDUs and ODUs
          9500 MPR/9500 MPRe card support
          Fan tray
          9500 MPR LAG objects
          9500 MPR/9500 MPRe statistics support
          9500 MPR services and service tunnel support
          9500 MPR/9500 MPRe NEtO support
          XPIC
          9500 MPRe support
        2.2 Workflow to manage 9500 MPR/9500 MPRe devices
    9500 MPR/9500 MPRe management
      3 - 9500 MPR/9500 MPRe device commissioning and management
        3.1 9500 MPR/9500 MPRe device commissioning and management overview
          9500 MPR/9500 MPRe management
          9500 MPR radio link discovery and management
        3.2 Workflow to manage 9500 MPR/9500 MPRe devices
        3.3 9500 MPR and 9500 MPRe device commissioning and management procedures
          Procedure 3-1 To commission a 9500 MPR or 9500 MPRe for 5620 SAM management
          Procedure 3-2 To configure polling for 9500 MPR/9500 MPRe devices
          Procedure 3-3 To enable 5620 SAM management of 9500 MPR/9500 MPRe devices
      4 - 9500 MPR/9500 MPRe object configuration
        4.1 9500 MPR/9500 MPRe object configuration overview
        4.2 Workflow to configure and manage 9500 MPR/9500 MPRe device objects
        4.3 9500 MPR/9500 MPRe device object configuration procedures
          Procedure 4-1 To configure system settings on a 9500 MPR
          Procedure 4-2 To resolve 9500 MPR MIB inconsistencies
          Procedure 4-3 To configure a scope of command role for NEtO access
          Procedure 4-4 To start the 9500 MPR/9500 MPRe external element manager from the 5620 SAM GUI
          Procedure 4-5 To configure a DSCP value for in-band TMN interfaces on the 9500 MPR
      5 - 9500 MPR LAG object configuration
        5.1 Working with 9500 MPR LAG objects
          9500 MPR LAG objects
        5.2 Workflow to configure and manage Ethernet 9500 MPR LAG objects
        5.3 9500 MPR LAG configuration procedures
          Procedure 5-1 To create an Ethernet LAG on a 9500 MPR
          Procedure 5-2 To delete a 9500 MPR Ethernet LAG
      6 - 9500 MPR/9500 MPRe shelf object configuration
        6.1 9500 MPR/9500 MPRe shelf object configuration overview
        6.2 Working with shelf objects on 9500 MPR/9500 MPRe devices
        6.3 Working with card and card slot objects on 9500 MPR/9500 MPRe devices
          CorEvo card
        6.4 Workflow to manage shelf objects on 9500 MPR/9500 MPRe devices
        6.5 9500 MPR/9500 MPRe shelf object configuration procedures
          Procedure 6-1 To configure a 9500 MPR basic or advanced fan tray
          Procedure 6-2 To configure synchronization using SYNC-IO SFPs
          Procedure 6-3 To configure a 1588 transparent clock on a 9500 MPR shelf
          Procedure 6-4 To perform an on-demand 9500 MPR or 9500 MPRe software upgrade
          Procedure 6-5 To manage the 9500 MPR or 9500 MPRe running software
          Procedure 6-6 To migrate the 9500 MPRe connected to a 7705 SAR from standalone mode to single NE mode
      7 - 9500 MPR/9500 MPRe port object configuration
        7.1 9500 MPR/9500 MPRe port configuration overview
          IMA support
          9500 MPR Ethernet port QoS schemes
          EFM OAM
        7.2 Workflow to manage port objects on 9500 MPR/9500 MPRe devices
        7.3 Port configuration procedures
          Procedure 7-1 To configure 9500 MPR Ethernet ports
          Procedure 7-2 To configure analog performance management on 9500 MPR 1x radio modem ports
          Procedure 7-3 To configure power level performance management on 9500 MPR 1x radio modem ports
          Procedure 7-4 To configure 9500 MPR port segregation
          Procedure 7-5 To configure a 9500 MPR power source type
          Procedure 7-6 To configure synchronization on Ethernet ports
          Procedure 7-7 To configure a loopback test
          Procedure 7-8 To configure remote loopback EFM OAM function on a port
    9500 MPR/9500 MPRe policy and service management
      8 - 9500 MPR/9500 MPRe QoS policies
        8.1 9500 MPR/9500 MPRe QoS policies overview
          9500 ATM QoS policies
          9500 NE QoS policies
          9500 Radio Interface Queue Map policies
        8.2 Workflow to configure 9500 MPR/9500 MPRe QoS policies
        8.3 9500 MPR/9500 MPRe QoS policies procedures
          Procedure 8-1 To configure and distribute a 9500 MPR ATM QoS policy
          Procedure 8-2 To configure and distribute a 9500 Radio Interface Queue Map policy
          Procedure 8-3 To configure and distribute a 9500 NE QoS policy
      9 - 9500 MPR service management and service tunnels
        9.1 9500 MPR service management overview
          Supported service types
          Complete transport service
          9500 MPR services support
          9500 MPR and 9500 MPRe service provisioning considerations and design constraints
        9.2 9500 MPR service tunnel overview
          9500 MPR service tunnel (ERPS) support
        9.3 Ethernet (G.8032) rings
          ERP topology
          9500 MPR ERPS tail node support on Ethernet (G.8032) rings
          Supported ERP service types
        9.4 Configuring service tunnels on 9500 MPR devices
          Procedure 9-1 To create an Ethernet radio ring element on a 9500 MPR
        9.5 Workflow to configure a composite service
      10 - 9500 MPR VLAN service management
        10.1 9500 MPR VLAN service management overview
          Supported VLAN services types for 9500 MPR devices
          VLAN groups and paths
        10.2 Workflow to create VLAN services on 9500 MPR devices
        10.3 VLAN service management procedures for 9500 MPR devices
          Procedure 10-1 To create a VLAN group
          Procedure 10-2 To create a 9500 MPR VLAN path
          Procedure 10-3 To create a 9500 MPR (dot1q) VLAN service
          Procedure 10-4 To create a 9500 MPR (dot1ad) VLAN service
          Procedure 10-5 To create a CoS rate limiter per VLAN on a 9500 MPR
          Procedure 10-6 To discover 9500 MPR services
          Procedure 10-7 To delete a VLAN group or group member
          Procedure 10-8 To delete a 9500 MPR VLAN path
      11 - 9500 MPR VLL service management
        11.1 9500 MPR VLL service management overview
          Supported VLL services types for 9500 MPR devices
        11.2 Workflow to create VLL services on 9500 MPR devices
        11.3 VLL service management procedures for 9500 MPR devices
          Procedure 11-1 To create a VLL Apipe service on the 9500 MPR (ETSI only)
          Procedure 11-2 To create a VLL Cpipe service on a 9500 MPR
          Procedure 11-3 To create a single site VLL Cpipe service on 9500 MPR connected to an MSS1c lightweight GNE
          Procedure 11-4 To discover a single-site Cpipe service on 9500 MPR connected to an MSS-1c lightweight GNE
          Procedure 11-5 To fix a failed cross-connection in a 9500 MPR Cpipe or a hop-based VLAN service
          Procedure 11-6 To configure a GNE site on a VLL service
    Appendices
      A. 9500 MPR SAM-E license functionality
        A.1 9500 MPR SAM-E license functionality
  About this document
    Legal information
    Contacts
    Part numbers
  MPR User Guide
    Getting started
      1 - What's new?
        1.1 What's new in 5620 SAM Release 13.0 for 9500 MPR and 9500 MPRe devices
          Maintenance releases
          What's new in 5620 SAM Release 13.0 R3
      2 - 9500 MPR/9500 MPRe overview
        2.1 5620 SAM management of 9500 MPR/9500 MPRe devices
          Supported device objects, auxiliary equipment, and service types
          Supported MSS types
          MSS-O
          IDUs and ODUs
          9500 MPR/9500 MPRe card support
          Fan tray
          9500 MPR LAG objects
          9500 MPR/9500 MPRe statistics support
          9500 MPR services and service tunnel support
          9500 MPR/9500 MPRe NEtO support
          XPIC
          9500 MPRe support
        2.2 Workflow to manage 9500 MPR/9500 MPRe devices
    9500 MPR/9500 MPRe management
      3 - 9500 MPR/9500 MPRe device commissioning and management
        3.1 9500 MPR/9500 MPRe device commissioning and management overview
          9500 MPR/9500 MPRe management
          9500 MPR radio link discovery and management
        3.2 Workflow to manage 9500 MPR/9500 MPRe devices
        3.3 9500 MPR and 9500 MPRe device commissioning and management procedures
          Procedure 3-1 To commission a 9500 MPR or 9500 MPRe for 5620 SAM management
          Procedure 3-2 To configure polling for 9500 MPR/9500 MPRe devices
          Procedure 3-3 To enable 5620 SAM management of 9500 MPR/9500 MPRe devices
      4 - 9500 MPR/9500 MPRe object configuration
        4.1 9500 MPR/9500 MPRe object configuration overview
        4.2 Workflow to configure and manage 9500 MPR/9500 MPRe device objects
        4.3 9500 MPR/9500 MPRe device object configuration procedures
          Procedure 4-1 To configure system settings on a 9500 MPR
          Procedure 4-2 To resolve 9500 MPR MIB inconsistencies
          Procedure 4-3 To configure a scope of command role for NEtO access
          Procedure 4-4 To start the 9500 MPR/9500 MPRe external element manager from the 5620 SAM GUI
          Procedure 4-5 To configure a DSCP value for in-band TMN interfaces on the 9500 MPR
      5 - 9500 MPR LAG object configuration
        5.1 Working with 9500 MPR LAG objects
          9500 MPR LAG objects
        5.2 Workflow to configure and manage Ethernet 9500 MPR LAG objects
        5.3 9500 MPR LAG configuration procedures
          Procedure 5-1 To create an Ethernet LAG on a 9500 MPR
          Procedure 5-2 To delete a 9500 MPR Ethernet LAG
      6 - 9500 MPR/9500 MPRe shelf object configuration
        6.1 9500 MPR/9500 MPRe shelf object configuration overview
        6.2 Working with shelf objects on 9500 MPR/9500 MPRe devices
        6.3 Working with card and card slot objects on 9500 MPR/9500 MPRe devices
          CorEvo card
        6.4 Workflow to manage shelf objects on 9500 MPR/9500 MPRe devices
        6.5 9500 MPR/9500 MPRe shelf object configuration procedures
          Procedure 6-1 To configure a 9500 MPR basic or advanced fan tray
          Procedure 6-2 To configure synchronization using SYNC-IO SFPs
          Procedure 6-3 To configure a 1588 transparent clock on a 9500 MPR shelf
          Procedure 6-4 To perform an on-demand 9500 MPR or 9500 MPRe software upgrade
          Procedure 6-5 To manage the 9500 MPR or 9500 MPRe running software
          Procedure 6-6 To migrate the 9500 MPRe connected to a 7705 SAR from standalone mode to single NE mode
      7 - 9500 MPR/9500 MPRe port object configuration
        7.1 9500 MPR/9500 MPRe port configuration overview
          IMA support
          9500 MPR Ethernet port QoS schemes
          EFM OAM
        7.2 Workflow to manage port objects on 9500 MPR/9500 MPRe devices
        7.3 Port configuration procedures
          Procedure 7-1 To configure 9500 MPR Ethernet ports
          Procedure 7-2 To configure analog performance management on 9500 MPR 1x radio modem ports
          Procedure 7-3 To configure power level performance management on 9500 MPR 1x radio modem ports
          Procedure 7-4 To configure 9500 MPR port segregation
          Procedure 7-5 To configure a 9500 MPR power source type
          Procedure 7-6 To configure synchronization on Ethernet ports
          Procedure 7-7 To configure a loopback test
          Procedure 7-8 To configure remote loopback EFM OAM function on a port
    9500 MPR/9500 MPRe policy and service management
      8 - 9500 MPR/9500 MPRe QoS policies
        8.1 9500 MPR/9500 MPRe QoS policies overview
          9500 ATM QoS policies
          9500 NE QoS policies
          9500 Radio Interface Queue Map policies
        8.2 Workflow to configure 9500 MPR/9500 MPRe QoS policies
        8.3 9500 MPR/9500 MPRe QoS policies procedures
          Procedure 8-1 To configure and distribute a 9500 MPR ATM QoS policy
          Procedure 8-2 To configure and distribute a 9500 Radio Interface Queue Map policy
          Procedure 8-3 To configure and distribute a 9500 NE QoS policy
      9 - 9500 MPR service management and service tunnels
        9.1 9500 MPR service management overview
          Supported service types
          Complete transport service
          9500 MPR services support
          9500 MPR and 9500 MPRe service provisioning considerations and design constraints
        9.2 9500 MPR service tunnel overview
          9500 MPR service tunnel (ERPS) support
        9.3 Ethernet (G.8032) rings
          ERP topology
          9500 MPR ERPS tail node support on Ethernet (G.8032) rings
          Supported ERP service types
        9.4 Configuring service tunnels on 9500 MPR devices
          Procedure 9-1 To create an Ethernet radio ring element on a 9500 MPR
        9.5 Workflow to configure a composite service
      10 - 9500 MPR VLAN service management
        10.1 9500 MPR VLAN service management overview
          Supported VLAN services types for 9500 MPR devices
          VLAN groups and paths
        10.2 Workflow to create VLAN services on 9500 MPR devices
        10.3 VLAN service management procedures for 9500 MPR devices
          Procedure 10-1 To create a VLAN group
          Procedure 10-2 To create a 9500 MPR VLAN path
          Procedure 10-3 To create a 9500 MPR (dot1q) VLAN service
          Procedure 10-4 To create a 9500 MPR (dot1ad) VLAN service
          Procedure 10-5 To create a CoS rate limiter per VLAN on a 9500 MPR
          Procedure 10-6 To discover 9500 MPR services
          Procedure 10-7 To delete a VLAN group or group member
          Procedure 10-8 To delete a 9500 MPR VLAN path
      11 - 9500 MPR VLL service management
        11.1 9500 MPR VLL service management overview
          Supported VLL services types for 9500 MPR devices
        11.2 Workflow to create VLL services on 9500 MPR devices
        11.3 VLL service management procedures for 9500 MPR devices
          Procedure 11-1 To create a VLL Apipe service on the 9500 MPR (ETSI only)
          Procedure 11-2 To create a VLL Cpipe service on a 9500 MPR
          Procedure 11-3 To create a single site VLL Cpipe service on 9500 MPR connected to an MSS1c lightweight GNE
          Procedure 11-4 To discover a single-site Cpipe service on 9500 MPR connected to an MSS-1c lightweight GNE
          Procedure 11-5 To fix a failed cross-connection in a 9500 MPR Cpipe or a hop-based VLAN service
          Procedure 11-6 To configure a GNE site on a VLL service
    Appendices
      A. 9500 MPR SAM-E license functionality
        A.1 9500 MPR SAM-E license functionality
NFV Solutions Guide
  Legal notice
    Legal notice
    Disclaimers
  Contents
  About this document
    Purpose
    Document support
    How to comment
  1. NFV solution overview
    Purpose
    Network function virtualization overview
      General information
      OpenStack
    5620 SAM role in NFV solution
      General information
      VNF assurance and monitoring
      VNF management
      Supported VNFs
      VNF application cross-launch
      Licensing
      Element management
  2. VNF applications
    Purpose
    5620 SAM applications overview
      General information
      Browser compatibility
      Access permissions
      Product help tours
    VNF Manager application
      General information
      Application interface
      VNF catalogs
      Cloud access point
      VNF instantiation and management
    VNF Monitoring application
      General information
      Application interface
      Summary views and supervision groups
      Watch view
      Drill down
      Alarm list
  3. NFV use cases
    Purpose
    Supervision group configuration
      Overview
      Workflow to configure VNF supervision groups
    Procedure 3-1: To configure a VNF supervision group
      Purpose
      Steps
    Procedure 3-2: To configure a summary view
      Purpose
      Steps
    Automatic scale-out
      Overview
    Procedure 3-3: To configure automatic scale-out
      Purpose
      Steps
    VNF node licensing
      Overview
      Usage consumption logging
    Procedure 3-4: View node license information for a specific VNFC
      Purpose
      Steps
    Procedure 3-5: View license usage consumption
      Purpose
      Steps
  Legal notice
    Legal notice
    Disclaimers
  Contents
  About this document
    Purpose
    Document support
    How to comment
  1. NFV solution overview
    Purpose
    Network function virtualization overview
      General information
      OpenStack
    5620 SAM role in NFV solution
      General information
      VNF assurance and monitoring
      VNF management
      Supported VNFs
      VNF application cross-launch
      Licensing
      Element management
  2. VNF applications
    Purpose
    5620 SAM applications overview
      General information
      Browser compatibility
      Access permissions
      Product help tours
    VNF Manager application
      General information
      Application interface
      VNF catalogs
      Cloud access point
      VNF instantiation and management
    VNF Monitoring application
      General information
      Application interface
      Summary views and supervision groups
      Watch view
      Drill down
      Alarm list
  3. NFV use cases
    Purpose
    Supervision group configuration
      Overview
      Workflow to configure VNF supervision groups
    Procedure 3-1: To configure a VNF supervision group
      Purpose
      Steps
    Procedure 3-2: To configure a summary view
      Purpose
      Steps
    Automatic scale-out
      Overview
    Procedure 3-3: To configure automatic scale-out
      Purpose
      Steps
    VNF node licensing
      Overview
      Usage consumption logging
    Procedure 3-4: View node license information for a specific VNFC
      Purpose
      Steps
    Procedure 3-5: View license usage consumption
      Purpose
      Steps
Nuage Virtualization User Guide
  Legal notice
    Legal notice
    Disclaimers
  Contents
  About this document
    Purpose
    Document support
    How to comment
  Solution overview
    Purpose
    1. What’s new?
      Purpose
      What’s new in 5620 SAM Release 13.0
        Overview
        Maintenance releases
        What’s new in 5620 SAM Release 13.0 R4
        What’s new in 5620 SAM Release 13.0 R3
        What’s new in 5620 SAM Release 13.0 R1
    2. 5620 SAM Nuage Virtualization overview
      Purpose
      5620 SAM Nuage Virtualization overview
        General information
      5620 SAM deployment and packaging
        General information
        Application branding
        Nuage Virtualization features
      About this guide
        General information
    3. Nuage data center service delivery solution
      Purpose
      Data center service delivery solution overview
        General information
      Virtualized Services Directory
        General information
      Distributed Virtual Routing and Switching
        General information
      7850 VSG
        General information
    4. 5620 SAM Nuage Virtualization platform and components
      Purpose
      5620 SAM Nuage Virtualization component overview
        General information
      5620 SAM
        General information
        5620 SAM system architecture
        5620 SAM GUI
      5650 CPAM
        General information
        7701 CPAA
    5. DC applications
      Purpose
      5620 SAM DC application overview
        General information
        Browser compatibility
        User group access permissions
      5620 SAM applications
        General information
        GUI element buttons
        Integrated help
  Equipment management
    Purpose
    6. Device commissioning and discovery
      Purpose
      Commissioning and managing devices with the 5620 SAM
        Overview
          General information
        7850 VSG commissioning
          General information
        5620 SAM device discovery
          General information
          Discovery rules
        5620 SAM automated device provisioning
          General information
          Post-discovery actions
          End-to-End IP Auto-Provisioning Bundle
          Bulk operations
      Device commissioning and discovery procedures
        Procedure 6-1: To discover a network element and execute and auto-configuration script
          Purpose
          Steps
    7. Equipment management
      Purpose
      Equipment management overview
        General information
      High availability virtual chassis
        General information
  Network infrastructure management
    Purpose
    8. Network management
      Purpose
      Monitoring and managing a DC network
        Overview
          General information
        Data Center Manager
          General information
        Virtual object persistence
          General information
          Ageout constraint policies
        Virtual object properties forms
          General information
          Virtual machine properties
          Virtual port properties
          Virtual switch properties
          Virtual services controller properties
        Data center management
          General information
        Virtualization control management
          General information
          Virtual Node in the 5620 SAM
        Software gateways
          General information
          Port profiles
        NSG management
          General information
      VSC redundancy
        VRS redundancy
          General information
        Workflow for VRS redundancy setup
          Process
      Network management procedures
        Procedure 8-1: To configure a data center
          Purpose
          Steps
        Procedure 8-2: To search the data center network using the Cloud Network navigation tree
          Purpose
          Steps
        Procedure 8-3: To configure OpenFlow on a VSC
          Purpose
          Steps
        Procedure 8-4: To navigate from a VM or V-Port to associated virtualized services or advertising routers
          Purpose
          Steps
        Procedure 8-5: To configure an ageout constraint policy
          Purpose
          Steps
        Procedure 8-6: To configure a port policy
          Purpose
          Steps
    9. Network monitoring and troubleshooting
      Purpose
      Monitoring and troubleshooting a DC network
        5650 CPAM IGP topology maps
          General information
          Map highlighting
          IP path monitors
          Topology checkpoints
        Operational groups
          General information
      Network monitoring and troubleshooting procedures
        Procedure 9-1: To map the control path from a VSC to an associated VM
          Purpose
          Steps
        Procedure 9-2: To map the path from an NE to an associated virtual component
          Purpose
          Steps
        Procedure 9-3: To configure an operational group
          Purpose
          Steps
  Service management
    Purpose
    10. Virtualized services
      Purpose
      Virtualized services overview
        General information
      Distributed virtual routing and switching overview
        General information
      Virtualized service discovery
        General information
      Lightweight services
        General information
      Services Manager
        General information
      Virtualized service object properties forms
        General information
        Virtualized service properties form
        V-Site properties form
        Site properties form
    11. Services assurance and troubleshooting
      Purpose
      Monitoring and troubleshooting virtualized services
        Overview
          General information
        5650 CPAM for visibility and assurance
          General information
        Network object persistence
          General information
        Event retrieval log and correlation
          General information
          Learning correlation algorithm
          Historical Event Correlation Manager
          BGP event correlation
        5620 SAM fault correlation engine
          General information
          BGP prefix fault correlation
        5620 SAM fault correlation engine
          General information
          BGP prefix fault correlation
        BGP troubleshooting
          General information
          Administrative domains
          BGP route profiles
          BGP event retrieval and impact analysis
          IGP prefix monitors
      Services assurance and troubleshooting procedures
        Procedure 11-1: To troubleshoot a virtual service using CPAM maps
          Purpose
          Steps
  Statistics management
    Purpose
    12. Statistics collection and plotting
      Statistics collection and plotting overview
        General information
      Statistics collection
        General information
      Statistics plotting
        General information
  Legal notice
    Legal notice
    Disclaimers
  Contents
  About this document
    Purpose
    Document support
    How to comment
  Solution overview
    Purpose
    1. What’s new?
      Purpose
      What’s new in 5620 SAM Release 13.0
        Overview
        Maintenance releases
        What’s new in 5620 SAM Release 13.0 R4
        What’s new in 5620 SAM Release 13.0 R3
        What’s new in 5620 SAM Release 13.0 R1
    2. 5620 SAM Nuage Virtualization overview
      Purpose
      5620 SAM Nuage Virtualization overview
        General information
      5620 SAM deployment and packaging
        General information
        Application branding
        Nuage Virtualization features
      About this guide
        General information
    3. Nuage data center service delivery solution
      Purpose
      Data center service delivery solution overview
        General information
      Virtualized Services Directory
        General information
      Distributed Virtual Routing and Switching
        General information
      7850 VSG
        General information
    4. 5620 SAM Nuage Virtualization platform and components
      Purpose
      5620 SAM Nuage Virtualization component overview
        General information
      5620 SAM
        General information
        5620 SAM system architecture
        5620 SAM GUI
      5650 CPAM
        General information
        7701 CPAA
    5. DC applications
      Purpose
      5620 SAM DC application overview
        General information
        Browser compatibility
        User group access permissions
      5620 SAM applications
        General information
        GUI element buttons
        Integrated help
  Equipment management
    Purpose
    6. Device commissioning and discovery
      Purpose
      Commissioning and managing devices with the 5620 SAM
        Overview
          General information
        7850 VSG commissioning
          General information
        5620 SAM device discovery
          General information
          Discovery rules
        5620 SAM automated device provisioning
          General information
          Post-discovery actions
          End-to-End IP Auto-Provisioning Bundle
          Bulk operations
      Device commissioning and discovery procedures
        Procedure 6-1: To discover a network element and execute and auto-configuration script
          Purpose
          Steps
    7. Equipment management
      Purpose
      Equipment management overview
        General information
      High availability virtual chassis
        General information
  Network infrastructure management
    Purpose
    8. Network management
      Purpose
      Monitoring and managing a DC network
        Overview
          General information
        Data Center Manager
          General information
        Virtual object persistence
          General information
          Ageout constraint policies
        Virtual object properties forms
          General information
          Virtual machine properties
          Virtual port properties
          Virtual switch properties
          Virtual services controller properties
        Data center management
          General information
        Virtualization control management
          General information
          Virtual Node in the 5620 SAM
        Software gateways
          General information
          Port profiles
        NSG management
          General information
      VSC redundancy
        VRS redundancy
          General information
        Workflow for VRS redundancy setup
          Process
      Network management procedures
        Procedure 8-1: To configure a data center
          Purpose
          Steps
        Procedure 8-2: To search the data center network using the Cloud Network navigation tree
          Purpose
          Steps
        Procedure 8-3: To configure OpenFlow on a VSC
          Purpose
          Steps
        Procedure 8-4: To navigate from a VM or V-Port to associated virtualized services or advertising routers
          Purpose
          Steps
        Procedure 8-5: To configure an ageout constraint policy
          Purpose
          Steps
        Procedure 8-6: To configure a port policy
          Purpose
          Steps
    9. Network monitoring and troubleshooting
      Purpose
      Monitoring and troubleshooting a DC network
        5650 CPAM IGP topology maps
          General information
          Map highlighting
          IP path monitors
          Topology checkpoints
        Operational groups
          General information
      Network monitoring and troubleshooting procedures
        Procedure 9-1: To map the control path from a VSC to an associated VM
          Purpose
          Steps
        Procedure 9-2: To map the path from an NE to an associated virtual component
          Purpose
          Steps
        Procedure 9-3: To configure an operational group
          Purpose
          Steps
  Service management
    Purpose
    10. Virtualized services
      Purpose
      Virtualized services overview
        General information
      Distributed virtual routing and switching overview
        General information
      Virtualized service discovery
        General information
      Lightweight services
        General information
      Services Manager
        General information
      Virtualized service object properties forms
        General information
        Virtualized service properties form
        V-Site properties form
        Site properties form
    11. Services assurance and troubleshooting
      Purpose
      Monitoring and troubleshooting virtualized services
        Overview
          General information
        5650 CPAM for visibility and assurance
          General information
        Network object persistence
          General information
        Event retrieval log and correlation
          General information
          Learning correlation algorithm
          Historical Event Correlation Manager
          BGP event correlation
        5620 SAM fault correlation engine
          General information
          BGP prefix fault correlation
        5620 SAM fault correlation engine
          General information
          BGP prefix fault correlation
        BGP troubleshooting
          General information
          Administrative domains
          BGP route profiles
          BGP event retrieval and impact analysis
          IGP prefix monitors
      Services assurance and troubleshooting procedures
        Procedure 11-1: To troubleshoot a virtual service using CPAM maps
          Purpose
          Steps
  Statistics management
    Purpose
    12. Statistics collection and plotting
      Statistics collection and plotting overview
        General information
      Statistics collection
        General information
      Statistics plotting
        General information
Nuage Virtualization Solutions Guide
  Legal notice
    Legal notice
    Disclaimers
  Contents
  About this document
    Purpose
    Document support
    How to comment
  1. Release overview
    Purpose
    Release 13.0 R4 NV overview
      General information
    Release 13.0 R4 Java GUI features
      General information
    Release 13.0 R4 DC application features
      General information
    Release 13.0 R3 NV overview
      General information
    Release 13.0 R3 Java GUI features
      General information
    Release 13.0 R3 DC application features
      General information
      Inventory Management application enhancements
      Service Navigator application enhancements
  2. Solution overview
    Purpose
    Nuage Virtualization solution overview
      General information
    Nuage dVRS service solution overview
      General information
    Virtualized service management in the 5620 SAM
      General information
    NV solution packaging
      General information
      EML layer
      Infrastructure layer
      Dynamic service layer
      OSS integration
    5620 SAM equipment management
      General information
    5620 SAM infrastructure management
      General information
      Virtualization control management
      DC Manager
      5650 CPAM IGP topology maps
    5620 SAM service management
      General information
      Historical event correlation and logging
      Map highlighting
      VRS redundancy
    Alarm management
      General information
      TCAs
    OAM support
      General information
    Statistics management
      General information
    DC applications
      General information
      Data Center Inventory application
      Data Center Service Navigator application
      Fault Management application
  3. Use cases
    Purpose
    Sample VM assessment
      Overview
        General information
        VM monitoring
        Cause codes
        Event retrieval
    VM assessment procedures
      Procedure 3-1: To troubleshoot a down VM using the Service Navigator application
        Purpose
        Steps
    Sample underlay test for a virtualized service
      Overview
        General information
        Nuage OAM System script bundle
        Test results
    Underlay test procedures
      Workflow to perform an underlay test
        Process
      Procedure 3-2: To create the Nuage OAM System script bundle
        Purpose
        Steps
      Procedure 3-3: To execute an underlay test from the 5620 SAM Java GUI
        Purpose
        Steps
      Procedure 3-4: To execute an underlay test from the Service Navigator
        Purpose
        Steps
    Sample VM searching and monitoring
      Overview
        General information
        Inventory Management application
        Data Center Manager
    Sample 5650 CPAM map troubleshooting
      Overview
        General information
      Procedure 3-5: To troubleshoot a virtualized service using CPAM maps
        Purpose
        Steps
  Legal notice
    Legal notice
    Disclaimers
  Contents
  About this document
    Purpose
    Document support
    How to comment
  1. Release overview
    Purpose
    Release 13.0 R4 NV overview
      General information
    Release 13.0 R4 Java GUI features
      General information
    Release 13.0 R4 DC application features
      General information
    Release 13.0 R3 NV overview
      General information
    Release 13.0 R3 Java GUI features
      General information
    Release 13.0 R3 DC application features
      General information
      Inventory Management application enhancements
      Service Navigator application enhancements
  2. Solution overview
    Purpose
    Nuage Virtualization solution overview
      General information
    Nuage dVRS service solution overview
      General information
    Virtualized service management in the 5620 SAM
      General information
    NV solution packaging
      General information
      EML layer
      Infrastructure layer
      Dynamic service layer
      OSS integration
    5620 SAM equipment management
      General information
    5620 SAM infrastructure management
      General information
      Virtualization control management
      DC Manager
      5650 CPAM IGP topology maps
    5620 SAM service management
      General information
      Historical event correlation and logging
      Map highlighting
      VRS redundancy
    Alarm management
      General information
      TCAs
    OAM support
      General information
    Statistics management
      General information
    DC applications
      General information
      Data Center Inventory application
      Data Center Service Navigator application
      Fault Management application
  3. Use cases
    Purpose
    Sample VM assessment
      Overview
        General information
        VM monitoring
        Cause codes
        Event retrieval
    VM assessment procedures
      Procedure 3-1: To troubleshoot a down VM using the Service Navigator application
        Purpose
        Steps
    Sample underlay test for a virtualized service
      Overview
        General information
        Nuage OAM System script bundle
        Test results
    Underlay test procedures
      Workflow to perform an underlay test
        Process
      Procedure 3-2: To create the Nuage OAM System script bundle
        Purpose
        Steps
      Procedure 3-3: To execute an underlay test from the 5620 SAM Java GUI
        Purpose
        Steps
      Procedure 3-4: To execute an underlay test from the Service Navigator
        Purpose
        Steps
    Sample VM searching and monitoring
      Overview
        General information
        Inventory Management application
        Data Center Manager
    Sample 5650 CPAM map troubleshooting
      Overview
        General information
      Procedure 3-5: To troubleshoot a virtualized service using CPAM maps
        Purpose
        Steps
Optical Parameter Reference
  Legal notice
    Legal notice
    Disclaimers
  Contents
  About this document
    Purpose
    Document support
    How to comment
  1. Overview
    Parameter information
      Document structure
      Parameter attributes
      Parameter Search Tool
  2. Alcatel-Lucent 1830 PSS (PSS-36 OCS, PSS-64 OCS) parameters
    1830 PSS Performance Management Policy parameters
      Administrative State
      Description
      Displayed Name
      Password
      Policy ID
      Protocol
      User ID
    1:N ODUk Protection Group parameters
      Description
      Extra Traffic
      Holdoff Time
      Local
      Local
      Protected Working Facility
      Protection Switch
      Rate
      Remote
      Remote
      Revert Delay Time
      Revert Mode
      Shelf
      Shelf ID
      Signal Degrade
      Site
      Source
      Switch Direction
      Switch Status
    Area parameters
      Description
      ID
      Instance Id
      Name
      Type
      Type Mismatch
      Version
    Area Range parameters
      Area
      Area Index
      Effect
      Link State DB Type
      Metric
      Network
      Prefix Length
      Routing Instance ID
      Routing Instance Name
      Site ID
      Site Name
      Version
    Area Site parameters
      ABR Default Route Cost
      Active Interfaces
      Adjacency Check
      Area Border Router Count
      Area ID
      Area Index
      AS Border Router Count
      Blackhole Range
      Default Cost
      DNS Opaque LSAs Distributed
      Enable Advertise Router Capability
      Import AS Extern
      Import Summary
      Instance ID
      Loop-free Alternate Exclude
      LSA Checksum Sum
      MetricType
      Name
      Name
      NSSA Router Translation
      Originate Default Route
      Redistribute External Routes
      Routing Instance ID
      Routing Instance Name
      Site ID
      Site Name
      Stub Support
      Total Interfaces
      Total Virtual Links
      Translator Role
      Translator Stability Interval
      Translator State
      Type
      Version
      Virtual Link IP
      Wave Key Opaque LSAs Distributed
    AUn parameters
      Administrative State
      AINS Countdown
      AINS State
      AINS Timer
      Alarm Profile
      Ctp ID
      Egress Expected Path trace
      Egress Monitoring
      Egress Monitoring On
      Egress Signal Degrade Signal Fail Mode
      Egress Signal Degrade Threshold
      Egress Signal Failure Threshold
      Egress Trace Mismatch Consequence Action
      Ingress Expected Path Trace
      Ingress Monitoring
      Ingress Monitoring On
      Ingress Signal Degrade Signal Fail Mode
      Ingress Signal Degrade Threshold
      Ingress Signal Failure Threshold
      Ingress Trace Mismatch Consequence Action
      Management Access Domain
      Name
      Operational State
      Primary State
      Rate
      Secondary State
      Site ID
      Site ID
      Site Name
      Site Name
      TimeSlots
    BackupPolicy parameters
      Auto Backup Scheme
      Auto Backup Threshold
      Auto Purge Scheme
      Auto Reboot After Successful Restore
      Backup 7705 Radio Database
      Boot Option File Mode
      CLI Config File Mode
      CLI Config Save Details
      CLI Debug Save Config File Mode
      Command to Apply After Backup
      Enable Backup
      File Compression
      File Compression
      File Compression
      File Compression
      File Transfer Server Directory
      File Transfer Server Port
      Is Default Policy
      Maximum Backup Age
      Name
      Number Of Backups
      Policy ID
      Policy Type
      Root Directory
      Save Certified Directory
      Save Certified Directory
      Save Network Directory
      Scheduled Backup Interval
      Scheduled Backup Scheme
      Scheduled Backup Sync Time
      Scheduled Backup Threshold
      Server IP
      SFTP/FTP Password
      SFTP/FTP Password
      SFTP/FTP Server Port
      SFTP/FTP User ID
      SFTP/FTP User ID
      Transfer Protocol
      Transfer Protocol
      Use Active Server
    Base Card parameters
      Administrative State
      Background Diagnostics Fault Reason
      Background Diagnostics State
      Boot Code Version
      CAM Error Count (Complex 0)
      CAM Error Count (Complex 1)
      Card Type
      CLEI Code
      Datapath Cell Error Count (Complex 0)
      Datapath Cell Error Count (Complex 1)
      Datapath Error Count (Complex 0)
      Datapath Error Count (Complex 1)
      EC Active State
      Egress FCS Error Count (Complex 0)
      Egress FCS Error Count (Complex 1)
      Equipped
      Firmware Revision Status
      Hardware Class
      Ingress FCS Error Count (Complex 0)
      Ingress FCS Error Count (Complex 1)
      Last Boot Up Reason
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Manufacture Date
      Manufacturer
      Manufacturing Assembly No
      Manufacturing Deviations
      Manufacturing Variant
      Memory Error Count (Complex 0)
      Memory Error Count (Complex 0)
      Memory Error Count (Complex 0)
      Memory Error Count (Complex 1)
      Memory Error Count (Complex 1)
      Memory Error Count (Complex 1)
      Memory Parity Error Count (Complex 0)
      Memory Parity Error Count (Complex 1)
      Memory Size
      Number Of Daughter Card Slots
      Number Of Installed Daughter Cards
      Number of UEs Served
      Operational State
      Part Number
      Pool Mode
      Serial Number
      Shelf ID
      Shelf Type
      Site ID
      Site ID
      Site Name
      Site Name
      Slot ID
      Slot Name
      Software Version
      Source Cards of Egress FCS Errors (Complex 0)
      Source Cards of Egress FCS Errors (Complex 1)
      System Resource Profile Policy
    Card Slot parameters
      Administrative State
      Assigned Card Sub Type
      Assigned Card Type
      Background Diagnostics Fault Reason
      Background Diagnostics State
      Capability
      Card Mismatch
      CLEI Code
      Commands
      Current Command
      Equipped Card Sub Type
      Equipped Card Type
      Failure Reason
      Firmware Revision Status
      Hardware Class
      Manufacture Date
      Manufacturer
      Manufacturing Assembly No
      Manufacturing Deviations
      Manufacturing Variant
      Node Timing
      Operational State
      Part Number
      Protection Type
      Restoration Criteria
      Serial Number
      Serving EPC Instance
      Shelf ID
      Shutdown IOM/IMM for Memory Parity Errors
      Site ID
      Site Name
      Slot
      Slot ID
      Status
      Supported Card Types
      Unknown Status
    Card Specifics parameters
      ACO LED
      Active Line Timing Reference
      Active Timing Reference
      Actual Clock Source
      Actual Tilt
      Add Path Output Power
      Add Path Target Power
      AINS Mode
      Alarm Profile
      Amp Rating
      Associated PSS Shelf EC
      Audible Alarm Cutoff
      Auto Provisioning
      Average Demux Loss
      Average Insertion Loss
      Average Insertion Loss Pad
      Average Mux Loss
      Baseline Span Loss
      Capacity
      Card Description
      Card Height
      Card Mode
      Card Name
      Card Rate Mode
      Card Temperature
      Card Width
      Clear Optical Intrusion Detected Alarm
      CLEI
      Clip-On Shelf ID
      Clock A (reference local)
      Clock B (reference local)
      Clock Delta
      Clock Mode Status
      Company ID
      Cross Card Service Enabled
      Date
      Dispersion Fiber Length
      Distance
      Engress OA Pump Bias Current
      Engress OA Pump Temperature
      Extra Data
      Factory ID
      Fan Speed
      Fiber Mode
      Fiber Type
      Firmware Upgrade Available
      Flow Continuity Monitoring
      Force Protection Switch
      Gain
      Gain Tilt
      High Temperature Threshold
      Impedance
      Ingress OA Pump Bias Current
      Ingress OA Pump Temperature
      Input Current 1
      Input Current 2
      Input Current 3
      Input Power 1
      Input Power 2
      Input Power 3
      Input to Output Gain
      Input Voltage 1
      Input Voltage 2
      Input Voltage 3
      Insertion Loss Slope
      Insertion Loss Slope Pad
      ISON Mode
      Laser Temperature
      Level in Optical Node
      Loopback Message Interval
      Loopback Reply Timeout
      Loss Threshold
      Low Temperature Threshold
      Maximum Add Channel Count
      Maximum Current
      Maximum Gain
      Maximum Power
      Measured Current
      Measured Power
      Minimum Gain
      Mnemonic
      Monitoring Enabled
      Node Critical LED Color
      Node Major LED Color
      Node Minor LED Color
      Node Warning LED Color
      Operational Capability
      Optical Interconnect Line Count
      Output Selection
      Output VOA Setting
      Per-Channel Output Power
      PF Slot 1 (Reference local)
      PF Slot 1 (Reference local)
      PF Slot 1 (Reference PF slot 11)
      PF Slot 1 (Reference PF slot 7)
      PF Slot 11 (Reference local)
      PF Slot 19 (Reference local)
      PF Slot 19 (Reference PF slot 36)
      PF Slot 36 (Reference local)
      PF Slot 7 (Reference local)
      PMD
      Polling Period
      Primary State
      Protection LED Color
      Protection LED Color
      Protection Mode
      Protection Setting
      Protection Setting
      Provisioned Clock Source
      Provisioned Distance
      Provisioned Fiber Type
      PTP LED Color
      Pump1 Bias Current
      Pump1 Bias Current
      Pump1 Temperature
      Pump1 Temperature
      Pump2 Bias Current
      Pump2 Bias Current
      Pump2 Temperature
      Pump2 Temperature
      Pump3 Bias Current
      Pump3 Bias Current
      Pump3 Temperature
      Pump3 Temperature
      Pump4 Bias Current
      Pump4 Bias Current
      Pump4 Temperature
      Pump4 Temperature
      Pump5 Bias Current
      Pump5 Temperature
      Pump6 Bias current
      Pump6 Temperature
      Quality Level Threshold
      Raman Pump1 Bias Current
      Raman Pump1 Temperature
      Raman Pump2 Bias Current
      Raman Pump2 Temperature
      Raman Pump3 Bias Current
      Raman Pump3 Temperature
      Raman Pump4 Bias Current
      Raman Pump4 Temperature
      Secondary State
      Serial Number
      Signal Output Power
      Size
      Software Load
      Software Part Number
      Span Loss
      SSBit
      Standby Controller Ready to Protect
      State Qualifier
      Status LED Color
      SVLAN Tag Protocol ID1
      SVLAN Tag Protocol ID2
      SVLAN Tag Protocol ID3
      SVLAN Tag Protocol ID4
      Switch Request
      Switch Request
      Switch To Timing Reference
      Switch To Timing Reference
      Switch Type
      Sync Status Messaging
      Sync Status Messaging
      SyncE Support
      System Quality Level
      Tag Protocol ID
      Target Tilt
      Temperature Tolerance
      Total Dispersion Fit
      Total Input Power
      Total Output Power
      Unit Part Number
      Wait To Restore
    Color parameters
      ASON Domain ID
      Color ID
      Description
    Control Plane Node parameters
      Active Network Version
      Administrative State
      ASON Domain ID
      CP Node ID
      EMS Version
      GMRE Name
      GMRE NE Type
      Installed Network Version
      Last Restart Time
      Last SC Update Time
      List of Neighbors
      Manual Mode
      Migration State
      NE Version
      Network Construction Mode
      Operational State
      Owner
      Site ID
      Site Name
    Data Bearer Link parameters
      A End CP Node ID
      A End Data bearer ID
      A End Port Name
      A End Site ID
      A End Site Name
      A End TE Link ID
      A End User Label
      Administrative State
      Allow In-band
      Data Bearer
      Data Bearer
      DB Link Name
      Link-in Maintenance
      MS Signal Degraded
      Operational State
      Path Search Option
      Port
      Port
      TCM Layer
      TE Link
      Unterm ODU Trail
      Unterm ODU Trail
      Use default values for ODU Trail
      Wait To Revert
      Wave Key Assign Mode
      Z End CP Node ID
      Z End Data bearer ID
      Z End Port Name
      Z End Site ID
      Z End Site Name
      Z End TE Link ID
      Z End User Label
    Data Bearer parameters
      Administrative State
      Allow In-band
      ASON Domain ID
      ASON Plane Assignment
      ASON Remote Port
      ASON TELink
      CP Node ID
      Data Bearer ID
      Databearer ID (CLI)
      DataBearer User Label
      Direction
      I-NNI Link Pointer
      Link Type
      Link-in Maintenance
      Local Port Pointer
      MS Signal Degraded
      Operational State
      Port Name
      Remote Port Pointer
      Site ID
      Site ID
      Site Name
      Site Name
      SubNode ID
      TCM Layer
      Wait To Revert
    Digital Diagnostic Monitoring parameters
      Aux 1
      Aux 1 High Alarm
      Aux 1 High Warning
      Aux 1 Low Alarm
      Aux 1 Low Warning
      Aux 1 Type
      Aux 2
      Aux 2 High Alarm
      Aux 2 High Warning
      Aux 2 Low Alarm
      Aux 2 Low Warning
      Aux 2 Type
      Bias Current
      Bias Current (mA)
      Bias Current (mA) Per Lane
      High Alarm
      High Alarm
      High Alarm
      High Alarm
      High Alarm
      High Warning
      High Warning
      High Warning
      High Warning
      High Warning
      Input Power (dBm)
      Input Power (dBm) Per Lane
      Low Alarm
      Low Alarm
      Low Alarm
      Low Alarm
      Low Alarm
      Low Warning
      Low Warning
      Low Warning
      Low Warning
      Low Warning
      Optical Power
      Output Power
      Output Power (dBm)
      Output Power (dBm) Per Lane
      Power Type
      Rx Power 0
      Rx Power 1
      Rx Power 2
      Rx Power 3
      Rx Power 4
      Supply Voltage
      Temperature
      Temperature (degreeC)
      Temperature Offset
      Temperature Slope
      Thresholds Failed
      Tx Laser Bias Offset
      Tx Laser Bias Slope
      Tx Power Offset
      Tx Power Slope
      Voltage Offset
      Voltage Slope
    DirectInterfaceCtp parameters
      Interface ID
      Interface Name
      Routing Instance ID
      Routing Instance Name
      Site ID
      Site Name
    FFP parameters
      Active Conditions
      Active Facility
      Active Side
      APS Protection Mode
      Client Facility
      Connection Direction
      Current Request
      Description
      FFP ID
      FFProtection Mode
      Holdoff Time
      Local
      Local
      Pending Request
      Port
      Protection Method
      Protection Port
      Protection Switch
      Protection Switch
      Rate
      Remote
      Remote
      Request For
      Site ID
      Site ID
      Site Name
      Site Name
      Switch Direction
      Switch Direction
      Switch Status
      Type
      Type
      Wait to Restore
      Working Port
    GMRE Specifics parameters
      Additional Details
      GMRE Address
      GMRE Management address
      GMRE Name
      GMRE Notify address
    GmreOduCtpSubStructure parameters
      Assigned Rate
      Ctp ID
      Name
      Rate
      Site ID
      Site ID
      Site Name
      Site Name
      Timeslot(s)
    Hop parameters
      Administrative State
      AINS Enabled
      Channel
      CTP
      Hop Order
      Operational State
      Port
      Port Description
      Rate
      Site ID
      Site Name
    IP Address parameters
      Address ID
      Address State
      Broadcast Address Format
      CGA Modifier
      Customer ID
      Customer Name
      EUI-64
      Gateway IP Address
      Hold Up Time
      IGP Inhibit
      Interface ID
      Interface Name
      IP Address
      IP Address Preferred
      IPv4 Primary
      Operational Address
      Populate Host Routes
      Prefix Length
      Remote IP Address
      Routing Instance ID
      Routing Instance Name
      Service ID
      Service Name
      Site ID
      Site Name
      System IP
      Track SRRP Instance
      Type
    IP Filter Entry parameters
      Action
      Connection State
      Destination IP Address
      Destination IP Mask
      Destination Port (value)
      Destination Port Type
      Entry ID
      Filter Type
      Fragment
      ICMP Code
      ICMP Type
      Incoming Interface
      Incoming Interface ID
      Insert Index
      Internet Protocol
      Internet Protocol (value)
      Outgoing Interface
      Outgoing Interface ID
      Source IP Address
      Source IP Mask
      Source Port (value)
      Source Port Type
    LineReference parameters
      Actual Quality Level
      Administrative Status
      Alarm Profile
      Assigned Port
      Assigned Port
      Assigned Port
      Line Reference
      Lockout Status
      Operational Status
      Output Timing Lockout Status
      Output Timing Priority
      Primary State
      Priority
      Provisioned Quality Level
      QL Processing
      Signal Status
      SSM Status
    Media Adaptor parameters
      Acronym Code
      Administrative State
      Background Diagnostics Fault Reason
      Background Diagnostics State
      CLEI Code
      CLEI Code
      CLI Name
      Connector Code
      Connector Type
      Description
      Diagnostics Capable
      Factory ID
      Firmware Revision Status
      Hardware Class
      Interchangeability Marking
      Laser Tunability
      Laser Wavelength
      Link Length Support
      Link Length(m)
      Manufacture Date
      Manufacture Date (YYYY/MM/DD hh:mm:ss)
      Manufacturer
      Manufacturing Assembly No
      Manufacturing Deviations
      Manufacturing Variant
      Max Case Temp
      Model Name
      Model Number
      Module Present Type
      Module State
      Module Type
      Number of Lanes
      Operational State
      Optical Compliance
      Part Number
      Part Number
      RxDtv Dac Percent
      Serial Number
      Serial Number
      Site ID
      Site Name
      Software Part Number
      Supported Media
      Transceiver Type
      Tx Disable
      Vendor OUI
    Multipoint Service Path parameters
      ID
      Service Component ID
      Service Path Mode
    Multipoint Transport Service parameters
      A to Z
      Administrative State
      Administrative State
      Aggregated Service Site Operational State
      APS Direction
      CE-VLANID
      CE-VLANID - AZ
      CE-VLANID - ZA
      Committed Burst Size - AZ (Kbytes)
      Committed Burst Size - ZA (Kbytes)
      Committed Info Rate - AZ (Mbps)
      Committed Info Rate - ZA (Mbps)
      Composite ID
      Composite Service
      Contains Dynamically Created Sites
      Customer
      Customer ID
      Customer Name
      Description
      Direction
      Enable Application Performance Reporting
      EndPoint A Name
      EndPoint Z Name
      Force Create OCh XC
      Inconsistency
      Inconsistent
      Is SubGige Full Rate Service
      Is SubGige Service QinQ
      Is SVLAN Push-Pop/Keep Capable QinQ Service
      Is Untagged Traffic Supported
      Link Group ID
      Managed
      Modified for Throughput Test
      Number Of IP Detail Addresses
      Number Of Sites
      Operational State
      Path Preference
      Path Search Option
      Peak Burst Size - AZ (Kbytes)
      Peak Burst Size - ZA (Kbytes)
      Peak Info Rate - AZ (Mbps)
      Peak Info Rate - ZA (Mbps)
      Plane Type
      Protection Level
      Protection Path Service
      Protection Type
      QinQ Service Stack-VLAN Tagging Configuration
      Rate
      Report Customer Name
      Revert Mode
      Service Deployment Mode
      Service ID
      Service Name
      Service Priority
      Service Tier
      Service Type
      Service Type
      Site A ID
      Site A Name
      Site Z ID
      Site Z Name
      Stack-VLANID - AZ
      Stack-VLANID - ZA
      State Cause
      SVC Mgr Service ID
      Template
      Test Suite Count
      Use Existing Unprotected Services
      Wave Key Assign Mode
      Working Path Service
      Z to A
    NE Specifics parameters
      Aging Grace Period
      Aging Interval
      AINS Timer
      Allowed Logins After Password Expiration
      Altitude
      Altitude
      AUND Default Setting
      Compound Node Name
      Contact
      Default AINS State
      Default AINS State
      Default AINS Threshold
      Default AINS Threshold
      Dormant Account
      EC Programmed Capacity
      Enable NA Alarms
      Enable PM TCA Alerts
      Environmental Conditions Restricted
      Environmental Conditions Restricted
      Extended Temperature Range
      Feature IP Utilities restricted
      Feature Pause Flow Control
      File based PM Policy
      FIPS Squelch Mode
      HTTP Port
      Idle User Timeout
      Maximum Invalid Login Attempts
      Maximum Password Length
      Minimum Password Length
      Minimum Wait After Invalid Login
      MTC1T9 Programmed Capacity
      Network Element Description
      Network Element ID
      Network Element Mode
      Network Element Name
      Obsolescence Interval
      OCS IP
      ODUN Default Setting
      ODUN Default Setting
      ODUPTF Default Setting
      ODUPTF Default Setting
      OSPF Area Id(GCC/OSC Interfaces)
      OSPF Area Index(GCC/OSC Interfaces)
      OTU Default Setting
      OTU Default Setting
      Partner NE
      Partner NE
      Provision Mode
      Provision Mode
      Region
      Release Date
      Release Date
      SNMP Source
      Software Release
      Software Release
      STSN Default Setting
      Subnet Mask
      System Date Time during Last Resync
      System Restart Status
      System Restart Status
      Telnet Port
      Temperature Units
      Third Party Modules
      Third Party Modules
      TID
      TL1 Autonomous Messages Enabled
      UI Mode
      Wave Key Space
    NE User parameters
      Access
      Access Privilege
      Access Privilege
      Additional ID
      Allowed IP Addresses
      Attempted Logins
      Authentication Protocol
      Authorization Level
      Configuration Mode
      Confirm New Auth Password
      Confirm New Privacy Password
      Confirm Password
      Confirm Password
      Console Cannot Change Password
      Console Login Exec File
      Console New Password At Login
      Description
      Discovery State
      Distribution Mode
      Home Directory
      Last Sync From
      Last Sync Time
      New Authentication Password
      New Privacy Password
      Password
      Password
      Password Aging Remaining
      Password Last Change Time
      Policy Scope
      Privacy Protocol
      Profile 1
      Profile 2
      Profile 3
      Profile 4
      Profile 5
      Profile 6
      Profile 7
      Profile 8
      Restrict to Home
      Session Inactivity Timeout
      Session Inactivity Timeout
      Site ID
      Site Name
      Status
      Status
      Successful Logins
      User Allowed Status
      User Cannot Change Password
      User ID Aging Interval
      User Login Status
      User Name
    Network Element parameters
      Active Management IP
      Active Management IP
      Advertise Message
      Aggregate Rate
      Aggregate Rate
      Aggregate Rate
      Alarm Management
      Alternate Element Manager
      ASON Domain ID
      Assigned Event Notification Policy
      ATM OAM Loopback Location ID
      ATM OAM Loopback Period
      Auto Revert to Preferred
      Bandwidth Policy
      Chassis Topology
      Chassis Type
      Chassis Type Description
      Command Mode
      Compact Flash Cache
      Concurrent Active Session Count
      Concurrent Active Session Limit
      Config File Status
      Console Alarm Input
      Control Communication Down Reason
      Control Communication Status
      Custom Property 1
      Custom Property 2
      Custom Property 3
      Descriptor Version
      DMM Version 1 Compatibility
      DNS Domain
      Driver
      Element Management URL
      Enable Auto Route Distinguisher
      Enable FIPS-140-2
      Enable L3 Management Interface
      Enable Q in Q Untagged Sap
      Enable SNMP Streaming
      End
      eNodeB Equipment
      External EMS
      Feeder Port
      Global RADIUS Operational State
      GMRE License Enabled
      Hi-Water-Mark
      Id-Permission
      IP Address
      IP Load Balancing
      IP Next Hop Limit
      IP Next Hop Usage High
      L3 Management Interface
      L4 Load Balancing
      Last Resync End Time
      Last Resync Start Time
      Last Saved Result
      Last Saved Time
      Last Scheduled Resync End Time
      Last Scheduled Resync Start Time
      Latitude(degrees)
      Level
      LI Local Save Allowed
      Location
      Longitude(degrees)
      Loopback IP Address
      Low-Water-Mark
      LSR IP Load Balancing
      MAC Notification Count
      MAC Notification Interval
      MAC-Swap Port
      Management Ethernet Redundancy
      Management IP Address
      Management IP Selection
      Max Number of Sessions
      Max Number of Sessions per Tunnel
      Max Number of Tunnels
      Maximum Cleared Alarms
      MHF-Creation
      Mirror Port
      Multicast Enhanced Load Balancing
      Name
      Non MC Tunnel ID Range End
      Non MC Tunnel ID Range Start
      NTP State
      Number of Tries For Down State
      Number of Tries For Up State
      Operational State Transition Interval
      Operational Status
      PBB Source Backbone MAC Address
      Persistent Index Status
      Persistent SNMP Indices
      Policy Count
      PPS Message Type
      PPS Output
      Primary DNS
      Primary Route Preference
      Product Definition
      Profile Count
      QoS Classification
      RADIUS CoA Port
      Redundant Synchronization Mode
      Region
      Remote URL
      Resource Group ID
      Resync Status
      Revert Time
      Running on Standby
      Running Software Image
      Save Needed
      Scheduled Polling
      Scheduled Resync Status
      Secondary DNS
      Secondary Route Preference
      Separate LI Administration
      Service ID Lag Hashing
      Site ID
      Site Name
      SNMP Reachability
      Software Upgrade Transition States
      Software Version
      Start
      State
      State
      Sys Object ID
      System Description
      System ID (Loopback IP Address)
      System IP Address
      System Up Time
      System Wide FDB Records in Use
      Template Based Configuration
      Tertiary DNS
      TestHead Port
      Total PBB MAC Address Indices in Use
      Unshaped SAP CIR
      Use Virtual MAC-Swap Port
      Use Virtual Mirror Port
      Use Virtual TestHead Port
      Use WRED Slopes
      Vendor-Specific ICMP Extensions
      Virtual MAC-Swap Port
      Virtual Mirror Port
      Virtual TestHead Port
      Vnode
      VPLS Mode
      Zone Count
    Network Interface (NetworkInterface, optical) parameters
      Adjacency State
      alarmProfilePointer
      Cost Metric
      Dead Interval
      Hello Interval
      Interface ID
      Interface Name
      Interface Status
      L2 Interface Status
      MD5 Authentication Enabled
      MD5 Key
      MD5 Key ID
      MTU Size
      OSPF Area ID
      OSPF Area Index
      Packet Type
      Site ID
      Site Name
    Network Interface (NetworkInterface, rtr) parameters
      Actual Maximum Frame Size
      Actual Primary Status
      Admin Link Local Address
      Admin Link Local Address
      Admin Link Local Address Preferred
      Administrative State
      Aggregate CIR
      Aggregate Rate Limit
      Allow Directed Broadcasts
      Assign Aggregate CIR
      Assign Aggregate Rate Limit
      BFD Configured
      Broadcast
      Broadcast Address
      ByPass Zone Config
      Cflowd Type
      Class
      Client Status
      Configured IP MTU
      Configured Primary Status
      Delay on Init Only
      Delayed Up Period
      Delayed Up Timer
      Description
      DHCP Option-60
      Domain
      Duplicate Address Detection Disabled
      Egress IP ACL
      Egress IP Load Balancing
      Egress IPv6 ACL
      Egress Network Queue Policy
      Enable
      Enable Forwarding
      Enable Ingress FlowSpec IPv4
      Enable Ingress FlowSpec IPv6
      Enable Ingress Stats
      Enable MAC Accounting Stats
      Encapsulation Type
      Generic NE Interface
      Groups Included
      High Threshold
      Ingress IP ACL
      Ingress IPv6 ACL
      Inner Encapsulation Value
      Interface Encap Type
      Interface ID
      IPv6 Allowed
      IPv6 Operational State
      L4 Load Balance
      LAG Link Map Profile
      Last Operational State Change
      LDP Synchronization Timer
      Limit
      Link Local Address
      Link Local Address State
      Local DHCP Server
      Local DHCPv6 Server
      Log Only
      Loopback Enabled
      Low Threshold
      LSR IP Load Balancing
      MAC Address
      Maximum Frame Size Mismatch
      Monitor McRedirect
      Name
      NE DDoS Protection Policy
      NE DoS Protection
      Network Policy
      Operational IP MTU
      Operational State
      Operational State Reason
      Outer Encapsulation Value
      Policy Accounting Template
      Port
      Port ID
      Provisioned Maximum Frame Size
      PTP HW Assist
      PTP Interface
      QoS Route Lookup IPv4
      QoS Route Lookup IPv6
      Queue Group Instance ID
      Queue Group Instance ID
      Queue Group Template Policy
      Queue Group Template Policy
      RADIUS Proxy Server
      Routing Instance ID
      Routing Instance Name
      Show Link In IGP Topology
      Site ID
      Site ID
      Site Name
      SPI Load Balancing
      Stale Timer
      State Qualifier
      Strip Label
      TCP-MSS IPv4
      TCP-MSS IPv6
      TEID Load Balancing
      Threshold
      Trusted
      Type
      Underlying Port State
      Unnumbered Reference
      Unnumbered Type
      URPF Check Mode IPv4
      URPF Check Mode IPv6
      URPF Check State IPv4
      URPF Check State IPv6
      URPF Ignore Default IPv4
      URPF Ignore Default IPv6
      VAS Interface Type
      VLAN
      Zone Id
    Network Interface Facility Binding parameters
      Channel Type
      Facility Name
      no
      Protection Status
      yes
    NTP NE Config parameters
      Admin State
      Authentication Check
      Clock Source
      Current Server
      DaylightSavingsTime Configured
      Drift (Microsecond/second)
      MDA Time Stamp
      NTP Clock Mode
      NTP Enabled
      NTP Scale
      NTP Server
      NTP State
      NTP Synched
      Operational State
      Server Authenticate
      Site ID
      Site Name
      Stratum
      Time Offset Hours
      Time Offset Mins
      Time Offset Seconds
      Timezone
    NTP Server parameters
      Address Type
      Authentication Key Id
      ClockType
      Delay
      Index
      IP Address
      Is Active
      Jitter
      Key Index
      NTP Version
      Offset
      PollingInterval
      Preferred Server
      Primary State
      PTP Server
      Reach
      ReferenceID
      Secondary State
      Site ID
      Site Name
      Status
      Stratum
    O-GLSP Connection Entity parameters
      Data Bearer
      Data Bearer
      Data Bearer Id
      Data Bearer Id
      Hop Index
      Link Type
      ODU Facility
      ODU Facility
      ODU Facility
      Physical Port
      Physical Port
      Port
      Port
      Site ID
      Site ID
      Site Name
      Site Name
      TE Link
      TE Link Endpoint
      TE Link Endpoint
      TE Link ID
      TE Link ID
      Unterm ODU Trail
    O-GLSP Exclusion parameters
      CP Node ID
      Domain ID
      Excluded LSP ID
      Excluded O-GLSP ID
      no
    O-GLSP Route parameters
      ASON Domain ID
      CP Node ID
      Exclusive
      Leg Type
      Nominal
      O-GLSP ID
      Route Type
      State
      Total Latency
    O-GLSP Route XC parameters
      A End 1 CTP ID
      A End 2 CTP ID
      ASON Domain ID
      CP Node ID
      Cross Connect ID
      Cross Connect Type
      Leg Type
      Route Type
      Subnetwork Connection ID
      Z End 1 CTP ID
      Z End 2 CTP ID
      zEnd1 SNPP Ems
      zEnd1 SNPP Id
    O-GLSP Site parameters
      Site ID
      Site Name
      Site Position
    O-GLSP Termination Point parameters
      CTP ID
      Data Bearer ID
      EMS
      Position
      Termination Point
    OchCtp parameters
      Assigned Rate
      Channel
      Ctp ID
      Name
      Site ID
      Site Name
    OCS ACL IP Filter parameters
      Configuration Mode
      Discovery State
      Distribution Mode
      Filter Name
      Last Sync From
      Last Sync Time
      Policy Scope
      Site ID
      Site Name
    OCS Alarm Profile parameters
      ASAP AID
      ASAP Entity Type
      ASAP Profile ID
      Configuration Mode
      Default Profile
      Discovery State
      Distribution Mode
      Last Sync From
      Last Sync Time
      Policy Scope
      Site ID
      Site Name
      System Defined ASAP
      User Label
    OCS ASAP Condition parameters
      Condition
      Direction
      Location
      Service Effect
      Severity
    OCS NE TCA Profiles parameters
      Configuration Mode
      Default
      Discovery State
      Distribution Mode
      ID
      Last Sync From
      Last Sync Time
      Origin Site Name
      Policy Scope
      Site ID
      Site Name
      TCA Profile ID
      TCA Profile Type
      Userlabel
    OCS NE TCA Thresholds parameters
      Direction
      Location
      Monitored Type
      TCA Profile ID
      TCA Profile Type
      Threshold Value
      Threshold Value Clear
      Time Period
    ODU Cross Connect parameters
      Bidirectional
      Destination
      ID
      Name
      Protection State
      Rate
      Site ID
      Site Name
      Source
    ODU NIM parameters
      Administrative State
      AINS Countdown
      AINS State
      AINS Timer
      Alarm Profile
      Assigned Rate
      Clear All Bins
      Ctp ID
      Name
      ODU Rx PM Enabled
      ODU Tx PM Enabled
      Operational Capability
      Operational State
      Primary State
      Rate
      Secondary State
      Site ID
      Site ID
      Site Name
      Site Name
      State Qualifier
      TCA Profile
      Use System AINS Timer
    ODU NIM Point parameters
      Directionality
      Expected DAPI
      Expected TTI
      Incoming DAPI
      Incoming OS
      Incoming TTI
      Incoming TTI Status
      Name
      Path Overhead Monitoring
      Signal Degrade Burst Interval
      Signal Degrade Burst Threshold
      Site ID
      Site Name
      TTI Comparison
      TTI Mismatch Response
      TTI Status
    ODU Path Termination parameters
      Administrative State
      AINS Countdown
      AINS State
      AINS Timer
      Alarm Profile
      APS Enabled
      Assigned Rate
      Clear All Bins
      Client Payload Type
      Connection Monitoring End Point Mode
      CSF Format
      CSF Propagation
      Ctp ID
      DM Current Status
      DM Current Value
      Expected DAPI
      Expected TTI
      Incoming Backward FTFL Operator ID
      Incoming Backward FTFL Type ID
      Incoming DAPI
      Incoming EXP
      Incoming Forward FTFL Operator ID
      Incoming Forward FTFL Type ID
      Incoming OS
      Incoming TTI
      Incoming TTI Status
      Management Access Domain
      Name
      ODU Rx PM Enabled
      Operational Capability
      Operational State
      Payload Type
      Payload Type Mismatch Response
      Primary State
      Rate
      Received Payload Structure
      Secondary State
      Signal Degrade Burst Interval
      Signal Degrade Burst Threshold
      Site ID
      Site ID
      Site Name
      Site Name
      State Qualifier
      Supported Client Payload Types
      TCA Profile
      Transmit DAPI
      Transmit OS
      Transmitted Payload Structure
      Transmitted TTI
      TTI Comparison
      TTI Mismatch Response
      TTI Status
      Use System AINS Timer
    ODU Trail parameters
      A to Z
      A-Z Expected TTI
      A-Z Transmitted OS
      A-Z Transmitted TTI
      Additional Information
      Administrative State
      APS Direction
      Asymmetric Interworking
      Bidirectional
      Connection Type
      Customer
      Customer ID
      Customer Name
      Databearer Link
      DM Current Status
      DM Current Value
      EndPoint A Name
      EndPoint Z Name
      Force Create OCh XC
      Inconsistency
      Inconsistent
      O-GLSP
      ODU Trail Type
      Operational State
      Path Preference
      Path Search Option
      Payload Type
      Payload Type Mismatch Response
      Plane Type
      Port A Pointer
      Port Z Pointer
      Protection Level
      Protection Type
      Rate
      Restoration Level
      Revert Mode
      Site A ID
      Site A Name
      Site Z ID
      Site Z Name
      Trail ID
      Trail Name
      TTI Comparison
      TTI Mismatch Response
      TTI Preference
      Wait To Restore
      Wave Key Assign Mode
      Z to A
      Z-A Expected TTI
      Z-A Transmitted OS
      Z-A Transmitted TTI
    ODUk Cross Connect (OdukCrossConnect, oth) parameters
      Administrative State
      Bidirectional
      Cross Connect ID
      Destination
      High Order ODUk
      High Order ODUk
      High Order ODUk
      High Order ODUk Name
      High Order ODUk Name
      ID
      Low Order ODUk
      Low Order ODUk
      Low Order ODUk Name
      Low Order ODUk Name
      Name
      Name
      ODUk Protection Group
      Operational State
      Primary State
      Protection State
      Rate
      Rate
      Secondary State
      Shelf
      Shelf ID
      Site
      Site ID
      Site Name
      Source
      Termination on ODUPOOL
    ODUk Cross Connect (VirtualOdukCrossConnect, oth) parameters
      Bidirectional
      Cross Connect ID
      Destination
      Destination
      High Order ODUk
      High Order ODUk
      High Order ODUk Name
      High Order ODUk Name
      ID
      Low Order ODUk
      Low Order ODUk
      Low Order ODUk Name
      Low Order ODUk Name
      Name
      Name
      Protection State
      Rate
      Rate
      Shelf
      Shelf ID
      Site
      Site ID
      Site Name
      Source
      Source
    Oduk Nim Substructure parameters
      Administrative State
      AINS Countdown
      AINS State
      AINS Timer
      Alarm Profile
      APS Enabled
      Assigned Rate
      Clear All Bins
      Ctp ID
      Incoming Backward FTFL Operator ID
      Incoming Backward FTFL Type ID
      Incoming EXP
      Incoming Forward FTFL Operator ID
      Incoming Forward FTFL Type ID
      Name
      ODU Rx PM Enabled
      ODU Tx PM Enabled
      Operational State
      Primary State
      Rate
      Secondary State
      Site ID
      Site ID
      Site Name
      Site Name
      State Qualifier
      TCA Profile
      Timeslot(s)
      Use System AINS Timer
    ODUk Protection Group parameters
      Active Conditions
      Active Side
      Administrative State
      APS Protection Mode
      Client
      Client Facility
      Client Name
      Client on ODUPOOL
      Connection Direction
      Description
      Description
      Facility
      Facility
      Holdoff Time
      Local
      Local
      Operational State
      Port
      Primary State
      Protection Facility Name
      Protection Method
      Protection Method
      Protection Method
      Protection Switch
      Protection Type
      Remote
      Remote
      Request For
      Secondary State
      Shelf
      Shelf ID
      Signal Degrade
      Site
      Site ID
      Site Name
      Switch Direction
      Switch Status
      Type
      Wait to Restore
      Working Facility Name
    ODUk Protection Member parameters
      ID
      Lockout of Working
      Odu Facility Name
      Odu Facility Pointer
      Protection
      TCM Level
    OMS parameters
      Administrative State
      Alarm Profile
      Assigned Rate
      Ctp ID
      Down Link Facility
      Name
      Operational State
      Primary State
      Secondary State
      Site ID
      Site ID
      Site Name
      Site Name
    OMS Trail parameters
      A to Z
      Administrative State
      Bidirectional
      Connection Type
      Customer
      Customer ID
      Customer Name
      EndPoint A Name
      EndPoint Z Name
      Force Create OCh XC
      Operational State
      Path Preference
      Plane Type
      Port A Pointer
      Port Z Pointer
      Protection Level
      Protection Type
      Rate
      Site A ID
      Site A Name
      Site Z ID
      Site Z Name
      Trail ID
      Trail Name
      Z to A
    OMSOCH parameters
      Administrative State
      Alarm Profile
      Assigned Rate
      Ctp ID
      Down Link Facility
      Down Link Facility Name
      Name
      Operational State
      Primary State
      Secondary State
      Site ID
      Site ID
      Site Name
      Site Name
      Transmit Frequency
      Up Link Facility
      Up Link Facility Name
    OMSOCHIF parameters
      Administrative State
      Alarm Profile
      Assigned Rate
      Ctp ID
      Down Link Facility
      Management Access Domain
      Name
      Operational State
      Primary State
      Secondary State
      Site ID
      Site ID
      Site Name
      Site Name
      Transmit Frequency
      Up Link Facility
    Optical Channel parameters
      Accounting Policy
      Accounting Policy
      Actual Speed
      Administrative State
      Administrative State
      APS Common Configuration
      APS Protected
      Automatic VLAN Binding
      Background Diagnostics Fault Reason
      Background Diagnostics State
      Channel Type
      Class
      CLEI Code
      CLI Name
      Collect Accounting Statistics
      Collect Accounting Statistics
      Combiner
      Configured MAC
      Containing Equipment Status
      Description
      Encap Type
      Equipped
      Firmware Revision Status
      Hardware Class
      Hardware MAC
      Hold Time Down
      Hold Time Units
      Hold Time Up
      Holding IGH
      HSMDA Egress Scheduler Policy
      Interface ID
      L2 Profile
      L2Uplink
      Link Trap
      Link Up
      Load Balance Algorithm
      Local Channel ID
      Manufacture Date
      Manufacturer
      Manufacturing Assembly No
      Manufacturing Deviations
      Manufacturing Variant
      Mode
      MTU
      Name
      Network Queue Policy Name
      Operational State
      Operational State
      Parent Interface ID
      Parent Name
      Part Number
      Port Scheduler Policy
      Port Usage
      Previous State
      Queue 1
      Queue 2
      Queue 3
      Queue 4
      Queue 5
      Queue 6
      Queue 7
      Queue 8
      Serial Number
      Site ID
      Site Name
      Speed
      State
      Status
      Subrack Connection
      UNI Profile
      User label
    Optical Link parameters
      Calculated A-Z Loss
      Calculated Z-A Loss
      Direction
      Endpoint A - Port
      Endpoint A Name
      Endpoint A Type
      Endpoint B - Port
      Endpoint B Name
      Endpoint B Type
      gneInterfaceEndpointAPointer
      gneInterfaceEndpointBPointer
      ID
      Link Rate
      Name
      Notes
      Site A name
      Site B name
      Type
      Unmanaged NE Identifier
      Unmanaged NE Identifier
    Optical Path Constraint parameters
      Constraint Element
      Constraint Name
      Constraint Type
      Direction
      Exclude Colors
      Excluded Colors
      Include Colors
      Included Colors
      Latency Offset At Termination Points
      Maximum Hop Count
      Maximum Latency Allowed
      O-GLSP
      ODUk Rate
      ODUk Timeslot
      Optical Link
      OPTSG Timeslot
      OTUk Channel
      Port
      Service Path Type
      Site
      TE Link
      Trail
    Optical Service Path parameters
      Additional Information
      AUn A
      AUn Z
      Bidirectional
      Config Type
      Operational State
      Path ID
      Path Mode
      Port A
      Port Z
      Service Component ID
      Service Path Mode
      Weight
    Optical Site parameters
      Account Session ID
      Account Session ID (Control)
      Administrative State
      Creation Mode
      Customer ID
      Customer Name
      Description
      Dynamic Service Policy
      From/To
      Monitor Access Interface Operational State
      Name
      Number of SAPs
      Operational State
      Path Type
      Service ID
      Service Name
      Site Name
      State Cause
      SVC Mgr Service ID
      Switch Name
      System ID
    Optical Trail Path parameters
      Additional Information
      Bidirectional
      Operational State
      Parent Trail
      Path ID
      Trail End Port A
      Trail End Port A
      Trail End Port Z
      Trail End Port Z
      Trail Path Mode
    Optical Transport Service parameters
      A to Z
      Administrative State
      Administrative State
      Aggregated Service Site Operational State
      APS Direction
      CE-VLANID
      CE-VLANID - AZ
      CE-VLANID - ZA
      Committed Burst Size - AZ (Kbytes)
      Committed Burst Size - ZA (Kbytes)
      Committed Info Rate - AZ (Mbps)
      Committed Info Rate - ZA (Mbps)
      Composite ID
      Composite Service
      Contains Dynamically Created Sites
      Customer
      Customer ID
      Customer Name
      Description
      Direction
      Enable Application Performance Reporting
      EndPoint A Name
      EndPoint Z Name
      Force Create OCh XC
      Inconsistency
      Inconsistent
      Is SubGige Full Rate Service
      Is SubGige Service QinQ
      Is SVLAN Push-Pop/Keep Capable QinQ Service
      Is Untagged Traffic Supported
      Link Group ID
      Managed
      Modified for Throughput Test
      Number Of IP Detail Addresses
      Number Of Sites
      Operational State
      Path Preference
      Path Search Option
      Peak Burst Size - AZ (Kbytes)
      Peak Burst Size - ZA (Kbytes)
      Peak Info Rate - AZ (Mbps)
      Peak Info Rate - ZA (Mbps)
      Plane Type
      Protection Level
      Protection Path Service
      Protection Type
      QinQ Service Stack-VLAN Tagging Configuration
      Rate
      Report Customer Name
      Revert Mode
      Service Deployment Mode
      Service ID
      Service Name
      Service Priority
      Service Tier
      Service Type
      Site A ID
      Site A Name
      Site Z ID
      Site Z Name
      Stack-VLANID - AZ
      Stack-VLANID - ZA
      State Cause
      SVC Mgr Service ID
      Template
      Test Suite Count
      Use Existing Unprotected Services
      Wave Key Assign Mode
      Working Path Service
      Z to A
    OpticalGLSP parameters
      A-Z
      ASON Domain
      ASON Domain ID
      Calculated Latency
      Color Exclude
      Color Include
      Color Violation
      Configuration Type
      Connection Type
      Direction Type
      Excluded Colors
      Holding Priority
      Included Colors
      Latency Offset
      Latency Violation
      Link Diversity Violation
      LSP ID
      Manual Mode
      Max Hop Count
      Max Hop Violation
      Max Latency
      O-GLSP ID
      O-GLSP Name
      O-GLSP State
      ODU Trail
      Protection and Restoration
      Protection State
      Rate
      Rerouted
      Reversion Mode
      Setup Priority
      SRG Violation
      Test Mode
      Trail ID
      Trail Name
      Wait for server restoration
      Z-A
    OSPF Interface parameters
      Adjacency State
      Administrative State
      Advertise Subnet
      Area ID
      Authentication Keychain
      Authentication Type
      Backup Designated Router ID
      Backup Designated Router IP Address
      BFD DRs-Only
      BFD Enabled
      Configured Interface/Port MTU
      Configured MTU
      Description
      Designated Router ID
      Designated Router IP Address
      Enable Advertise Router Capability
      Encapsulation Type
      Hello Interval
      Inner Encapsulation Value
      Instance ID
      Interface Class
      Interface ID
      Interface ID
      Interface Name
      IPsec In Static Security Association
      IPsec Out Static Security Association
      IPsec Security Association Name
      LDP Synchronization State
      Loop-free Alternate Exclude
      LSA Checksum Sum
      LSA Count
      LSA Filter Out
      Metric
      Neighbor Count
      Network Type
      Node SID Type
      Node SID Value
      Operational Interface/Port MTU
      Operational Metric
      Operational MTU
      Operational State
      Outer Encapsulation Value
      Passive
      Password
      Poll Interval
      Port
      Priority
      Protocol
      Retransmission Interval
      RIB Priority
      Route Next-Hop Policy
      Router Dead Interval
      Routing Instance ID
      Routing Instance Name
      Site ID
      Site Name
      State Qualifier
      TE Metric
      Transit Delay
      Type
      Version
    OSPF Site parameters
      Administrative State
      Administrative State
      Advertise Router Capabilities
      Advertise Tunnel Links Enabled
      Area Border Router
      AS-Scope Checksum Sum
      AS-Scope Count
      Autonomous System Border Router
      Average Run Time
      Backbone Router
      Boot Overload Enabled
      Boot Overload Interval
      Domain ID
      Enable LDP Synchronization
      Exit Overflow Interval
      Export Limit
      Export Limit Log Percent
      External
      External (LS Type 5) Checksum Sum
      External (LS Type 5) Count
      External LSA Limit
      Graceful Restart
      Helper Mode
      Ignore DN Bit
      Incremental External Run Count
      Incremental Internal Run Count
      Incremental SPF Wait
      Initial Wait
      Initial Wait
      Instance ID
      Interface Base Reference Cost
      Internal
      Last Overload Entered Code
      Last Overload Entered Time
      Last Overload Exit Code
      Last Overload Exit Time
      Last Time Enabled
      Last Time Full SPF LFA Ran
      Last Time Full SPF Ran
      Last Time Ran
      LDP Over RSVP Include
      Log Only
      Loop-free Alternate
      LSA Accumulate
      LSA Arrival Wait
      LSA Generate Max Wait
      LSA Limit
      LSDB Overflow State
      Max PQ Cost
      Maximum Run Time
      Minimum Run Time
      Most Recent Full SPF Run Time
      Most Recent Run Time
      Multicast Import
      Name
      Number of Full LFA Runs
      Number Of Full SPF Runs
      Number Of Runs
      Opaque LSA Support
      Operational State
      OSPF Operational Router ID
      OSPF Router ID
      Overload Enabled
      Overload External Metric-Type 2
      Overload Interval
      Overload State
      Overload Stubs
      Prefix SID Max Index
      Prefix SID Start Label
      Prefix SID Type
      Redistribute Delay
      Remote Loop-free Alternate
      RFC1583 Compatible
      RIB High Priority Prefix List
      Routing Instance ID
      Routing Instance Name
      RSVP Shortcut Enabled
      Second Wait
      Second Wait
      Site ID
      Site Name
      SPF Max Wait
      Stub Router Support
      Super-Backbone
      Suppress DN Bit
      Threshold
      Time Entered
      Time of Exit
      Timeout
      Total Exported Routes
      Traffic Engineering Support
      Tunnel MTU Bytes
      Tunnel Table Preference
      Unicast Import
      Unknown AS-Scope Checksum Sum
      Unknown AS-Scope Count
      Version
      VPN Domain ID
      VPN Domain Type
      VPN Tag
    OTS parameters
      Administrative State
      Alarm Profile
      Assigned Rate
      Ctp ID
      Management Access Domain
      Name
      Operational State
      Primary State
      Secondary State
      Site ID
      Site ID
      Site Name
      Site Name
      Up Link Facility
    OTU Trail parameters
      A to Z
      A-Z OTU Expected TTI
      A-Z OTU Transmitted OS
      A-Z OTU Transmitted TTI
      Administrative State
      Bidirectional
      Channel
      Connection Type
      Customer
      Customer ID
      Customer Name
      EndPoint A Name
      EndPoint Z Name
      FEC Mode
      Force Create OCh XC
      Operational State
      OTU TTI Comparison
      OTU TTI Mismatch Response
      Path Preference
      Plane Type
      Port A Pointer
      Port Z Pointer
      Protection Level
      Protection Type
      Rate
      Regen Response
      Site A ID
      Site A Name
      Site Z ID
      Site Z Name
      Trail ID
      Trail Name
      TTI Format
      Wave Key Assign Mode
      Z to A
      Z-A OTU Expected TTI
      Z-A OTU Transmitted OS
      Z-A OTU Transmitted TTI
    OTUk parameters
      Administrative State
      AINS Countdown
      AINS State
      AINS Timer
      Alarm Profile
      Assigned Rate
      Asymmetric Interworking Enabled
      Consequent Action Loopback
      Ctp ID
      Expected DAPI
      Facility Loopback
      FEC Enabled
      FEC Mode
      Incoming DAPI
      Incoming OS
      Incoming SAPI
      Incoming TTI Status
      Management Access Domain
      Name
      Operational Capability
      Operational State
      OTU Expected TTI
      OTU Incoming TTI
      OTU Rate
      OTU Transmitted TTI
      OTU TTI Comparison
      OTU TTI Mismatch Response
      OTU TTI Status
      Post-FEC BER
      Pre-FEC BER
      Primary State
      Secondary State
      Signal Degrade Burst Interval
      Signal Degrade Burst Threshold
      Site ID
      Site ID
      Site Name
      Site Name
      State Qualifier
      TCA Profile
      Terminal Loopback
      Transmit DAPI
      Transmit OS
      Use System AINS Timer
    Physical Port parameters
      Access Weight
      Access Weight
      Accounting Policy
      Accounting Policy
      Actual Module Type
      Actual Speed
      Actual Tilt
      Actual Tilt
      Add
      Add Path Wavelength Tracker Decoder Usage
      Additional Operational State
      Administrative State
      Administrative State
      Administrative State
      Aggregate Rate
      AINS Countdown
      AINS Fault Criteria
      AINS Timer
      AIS Mode
      Alarm Profile
      Alarm Profile
      Alarm Profile
      Alarm Profile
      Allocated Adjustment Time
      Allowed Gain Delta
      Allowed Gain Delta
      APR Delay Enabled
      APR Delay Enabled
      APR Disabled
      APR Mode
      APR Mode
      APR Mode
      ASE Mode
      ASE Mode
      ASE Output Power
      ASE Output Power
      Assigned Rate
      Associated LD Line Port
      Asymmetric Interworking Enabled
      Attenuation
      Attenuation
      Auto Gain Adjustment Enabled
      Auto Negotiation
      Auto Provisioning
      Auto Tilt Adjustment Enabled
      Auto Tilt Maintainence Mode Enabled
      Automatic VLAN Binding
      Available Bandwidth
      Available Egress Bandwidth
      Available Ingress Bandwidth
      Average Add Insertion Loss
      Average Drop Insertion Loss
      Background Diagnostics Fault Reason
      Background Diagnostics State
      Cable Delay Correction (ns)
      Channel
      Channel Spacing(GHZ)
      Class
      Clear GMRE Topology Alarm
      CLEI
      CLEI Code
      CLI Name
      Collect Accounting Statistics
      Collect Accounting Statistics
      Collect Stats
      Combiner
      Commissioning Completed
      Company ID
      Compatibility Mode
      Compensation Module
      Configured MAC
      Connected From
      Connected From
      Connected From
      Connected LD OTDR Port
      Connected Line DCM
      Connected To
      Connected To
      Connected To
      Connected To Port
      Connected Type From
      Connected Type To
      Connection Monitoring End Point Mode
      Connection Retry Count
      Connection Retry Interval
      Consequent Action Loopback
      Consequent Actions Performed
      Container
      Containing Equipment Status
      Cost Metric
      CrossRegen Partner Port
      CSF Laser Consequent Action
      Current Key Info
      Data Bearer Details
      Date
      DDM Event Suppression
      Dead Interval
      Decommissioned
      Default VLAN
      Defect Holdoff Timer
      Defect Holdoff Timer
      Description
      Description
      DHCP IP Range
      DHCP Server Enabled
      Direction
      Direction
      Disable Port Automatically
      Distribute Default Gateway via DHCP
      DM Current Status
      DM Current Value
      Drop
      Drop Path Target Power
      Drop Path Wavelength Tracker Decoder Usage
      DTV Amplitude
      DTV Control Enabled
      DTV Phase
      E1 Frame Format
      Egress Percentage of Rate
      Egress Pool Policy
      Egress Ripple
      Egress Timing Mode
      Embedded ODU Facility Type
      Enable DEI
      Encapsulation Mode
      Encapsulation Mode
      Encapsulation Type
      Encoder Fault Active
      Equipped
      Errored Frame Drop Mode
      Expected J0
      Expected J0
      Expected J0
      Expected Maximum Gain
      Expected Maximum Gain
      Expected Minimum Gain
      Expected Minimum Gain
      Expected Network Output Power
      Expected Trace
      Express Channel Target Power
      Extra Data
      Facility AINS
      Facility Loopback
      Factory ID
      FarEnd Connected Port
      FC Mode
      FEC Mode
      FFP Group
      Fiber Length
      Fiber Type
      Fiber Type
      Fiber Type
      Firmware Revision Status
      Flow Control Enabled
      Flow Control Mode
      Force Routing Add
      Force Routing Add/Drop
      Force Routing Drop
      Frequency
      Function
      Gain
      Gain
      Gain
      Gain Range
      Gain Range
      Gain Setting
      Gain Setting
      Gain Tilt
      Gain Tilt
      GCC Channel Status
      GCC MTU Size
      GCC Packet Type
      GCC Type
      GFP CRC Framing
      Hardware Class
      Hardware MAC
      HDSDI Rate
      Hello Interval
      Hold Time Down
      Hold Time Units
      Hold Time Up
      Holding IGH
      HSMDA Egress Scheduler Policy
      Incoming J0
      Incoming J0
      Incoming J0
      Incoming J0 Status
      Incoming J0 Status
      Incoming J0 Status
      Ingress Percentage of Rate
      Ingress Pool Policy
      Initial Drop Channel Target Power
      Initial Loss
      Initial Target Gain
      Input LOS Threshold
      Input LOS threshold tolerance
      Input LOS Threshold Tolerance
      Input Loss of Signal Threshold
      Input Power
      Input Power
      Input to Output Gain
      Input to Output Gain
      Input to Output Gain
      Interface Enabled
      Interface ID
      Internal Port is Valid XC Endpoint
      IP Address
      Is Primary Member
      J0 Format
      J0 Format
      J0 Format
      J0 Trace Comparison
      J0 Trace Comparison
      J0 Trace Comparison Enabled
      J0 Trace Mismatch Response
      J0 Trace Mismatch Response Enabled
      L2 Profile
      L2Uplink
      LAG ID
      Laser Bias Current
      Laser State
      Laser Temperature
      LBO
      Line Code
      Line Impedance
      Link Group ID
      Link Integrity
      Link Trap
      Link Up
      Load Balance Algorithm
      LOS Mode
      LOS Propagation
      LPT Consequent Action
      MAC Address
      Management Access Domain
      Manufacture Date
      Manufacturer
      Manufacturing Assembly No
      Manufacturing Deviations
      Manufacturing Variant
      Mapping Mode
      Mapping Mode
      Mapping Mode
      Max Power Gain
      Maximum Attenuation
      Maximum Drop Channel Target Power
      Maximum Flat Gain
      Maximum Flat Gain Offset
      Maximum Frequency
      Maximum Gain
      MD5 Authentication Enabled
      MD5 Key
      MD5 Key ID
      Measured Network Output Power
      Min Power Gain
      Minimum Add Channel Power
      Minimum Attenuation
      Minimum Drop Channel Target Power
      Minimum Express Channel Power
      Minimum Frequency
      Minimum Gain
      Mnemonic
      Mode
      Monitored Port Connection Loss
      Monitored Port Tx
      Monocm Connection Address
      MTU
      Multicast From
      Multicast To
      Multiplex Section Protection Capability
      Multiplex Section REI Size
      MW Link Name
      Name
      Negotiation Mode
      Network Queue Policy Name
      Network Weight
      Network Weight
      Next Key Info
      OCH Type
      ODU Capable
      Operating Mode
      Operating Mode
      Operational Mode
      Operational Mode
      Operational Mode
      Operational Mode
      Operational State
      Operational State
      Operational State
      Opposite Direction Port
      Optical Transport Channel Unit
      OSC Mode
      OSC Transmitted Input Power
      OSC Transmitted Input Power
      OSC Transmitted Output Power
      OSC Transmitted Output Power
      OSPF Adjacency State
      OSPF Area ID
      OSPF Area Index
      OSPF Routing State
      OTU Encoding
      OTU Expected TTI
      OTU Incoming RES
      OTU Incoming TTI
      OTU Rate
      OTU Transmitted TTI
      OTU TTI Comparison
      OTU TTI Mismatch Response
      OTU TTI Status
      Outgoing Quality Level
      Outgoing Section Trace
      Output LOS Threshold
      Output LOS Threshold Tolerance
      Output Power
      Output VOA Setting
      Output VOA Setting
      Part Number
      Per-Channel Input Power
      Per-Channel Input Power Deviation
      Per-Channel Output Power
      Per-Channel Output Power
      Per-Channel Output Power
      Per-Channel Output Power Adjustment
      Per-Channel Output Power Deviation
      Per-Channel Output Power Deviation
      Physical State Change Count
      Pluggable Module Temperature
      Pluggable Module Type
      Port AINS
      Port AINS Mode
      Port Group
      Port Mode
      Port Role
      Port Role
      Port Scheduler Policy
      Port TCA Profile
      Port Type
      Port Usage
      Post-FEC BER
      Power Achieved
      Power Control Enabled
      Power Delta
      Power Gain
      Power Management Type
      Power Setting
      Power Setting
      Power Target
      PPS Status
      Pre-FEC BER
      Present Duplex Mode
      Present Link Speed
      Present MTU Size
      Previous State
      Primary State
      Primary State
      Protection Time Slot
      Provisioned Duplex Mode
      Provisioned Link Speed
      Provisioned MTU Size
      Proxy ARP
      Pst Correlated
      Pulse Format
      Pump 1 Power
      Pump 1 Power
      Pump 2 Power
      Pump 2 Power
      Pump 3 Power
      Pump 4 Power
      Pump Bias Current
      Pump Temperature
      Pumps disabled on Input LOS
      Pumps disabled on Input LOS
      Queue 1
      Queue 2
      Queue 3
      Queue 4
      Queue 5
      Queue 6
      Queue 7
      Queue 8
      Reason Down
      Receive Frequency
      Receive Lane Power
      Receive Lane Power
      Receive Power
      Receive Power
      Received Trace Mode
      Redistribute
      Regen Response
      Repair Margin
      Repair Margin
      Router Priority
      Rx Decision Threshold Voltage Adjustment
      SA Bit
      Secondary State
      Secondary State
      Sent Trace Mode
      Serial Number
      Serial Number
      Serial Type
      Service Launch Attenuation Offset
      SIG1
      SIG1
      SIG2
      SIG2
      SIG3
      SIG3
      SIG4
      SIG4
      SIG5
      SIG5
      SIG6
      SIG6
      SIG7
      SIG7
      SIG8
      SIG8
      Signal Degrade Signal Fail Mode
      Signal Degrade Threshold
      Signal Degrade Threshold
      Signal Degrade Threshold
      Signal Degrade Threshold
      Signal Fail Threshold
      Signal Failure Threshold
      Signal Failure Threshold
      Signal Failure Threshold
      Signal Mode
      Signal Mode
      Signal Output Power
      Signal Output Power
      Signal Output Power
      Signal Output Power
      Signal Output Power
      Signal Type
      Site ID
      Site Name
      Skew Info
      Software Part Number
      Source IP
      Span Loss Default
      Span Loss Tilt
      SPB Service Mode
      Specific Description
      Speed
      Splice Margin
      Splice Margin
      Split Horizon Group
      SSF Laser Consequent Action
      State
      State
      State Qualifier
      Status
      Status
      Status LED Color
      Subnet Mask
      Subrack Connection
      SVLAN Tag Protocol ID
      Switching Threshold
      Switching Threshold Calculation Mode
      Switching Threshold Tolerance
      Target Gain
      Target Gain
      Target Tilt
      Target Tilt
      Target Tilt
      TCA Profile
      Terminal Loopback
      Test In Progress?
      Test Signal Loopback
      Tilt Calculation Coefficient for DCM
      Time Offset Past Hour
      Time Period Between Adjustments
      ToD Format
      ToD Status
      Total Input Power
      Total Input Power
      Total Input Power
      Total Input Power
      Total Input Power
      Total Input Power
      Total Input Power
      Total Input Power
      Total Output Power
      Total Output Power
      Total Output Power
      Total Output Power
      Total Output Power
      Total Output Power
      Total Output Power
      Total Output Power
      Total Output Power
      Total Output Power at Monitored Port
      Trace Identifier Mismatch Monitored
      Transmit Frequency
      Transmit Lane Power
      Transmit Lane Power
      Transmit Power
      Transmit Power
      Transmitted J0
      Transmitted J0
      Transmitted S1 Byte
      Transmitted SSM
      Transponder Transmit Power
      UNI Profile
      Unit Part Number
      Untagged/PriorityCE-VLAN ID
      Use System Default AINS Timer
      User label
      Vlan Xlation Mode
      VOA Attenuation
      VOA Mode
      VPLS Mode
      VTS1 Source
      VTS10 Source
      VTS2 Source
      VTS3 Source
      VTS4 Source
      VTS5 Source
      VTS6 Source
      VTS7 Source
      VTS8 Source
      VTS9 Source
      Wave Key 1
      Wave Key 2
      Wave Key Transmit Status
      Wave Tracker Key Enabled
      Wavelength Tracker Decoder Usage
      WaveLength Tracker domain
      Working Time Slot
    PMON Configuration parameters
      Direction
      Enable
      Enable
      Facility Name
      Location
      Mode Type
      Mode Type
      Time Period
      Type
    Port Group parameters
      Current Release
      Firmware Upgrade Available
      Id
      Mode
      Provision Release
    PreviewHop parameters
      Administrative State
      AINS Enabled
      Channel
      CTP
      Hop Order
      Operational State
      Port
      Port Description
      Rate
      Site ID
      Site Name
    PreviewPath parameters
      Additional Information
      Bidirectional
      Operational State
      Path ID
      Path Mode
      Port A
      Port Z
    Protection Switch parameters
      Ason Domain ID
      Client DataBearer ID
      clientDataBearerPointer
      clientOduFacilityPointer
      CP Node ID
      Layer Rate
      O-GLSP ID
      Protection Type
      Site ID
      Site Name
      SNCP Direction
      SubNode ID
      Switch Command
      Switch Position
      Switch Reason
      Switch Request
      Switch Status
      Switched To DataBearer ID
      switchToDataBearerPointer
      switchToOduFacilityPointer
    Shelf parameters
      Active Switch Status
      Administrative Mode
      Administrative State
      Administrative State
      AINS Enabled
      Air Flow
      Alarm Profile
      Alarm Profile
      Allow IMM Family Type
      Application Mode
      Assigned Type
      Background Diagnostics Fault Reason
      Background Diagnostics State
      Base MAC Address
      Calculated Load
      Calculated Load
      Chassis Role
      CLEI
      CLEI Code
      CLEI Code
      CLLI Code
      Clock Mode Status
      Clock Source
      Company ID
      Date
      Default IMM Family Type
      Equipped Type
      Expected PF Amps
      Expected Volts
      Expected Volts
      External AC Power
      Extra Data
      Factory ID
      Firmware Revision Status
      Firmware Version
      Force Mode
      Free Switching Capacity of SDH/SONET
      Free Switching Capacity of the first row
      Free Switching Capacity of the second row
      Hardware Class
      High Voltage Threshold
      High Voltage Threshold
      HW Revision
      Installed Fan Trays
      Installed Fans
      Installed Ports
      Installed Power Supplies
      Is Managed
      LED Status
      Line Reference
      Load Warning Threshold
      Low Temperature State
      Low Voltage Threshold
      Low Voltage Threshold
      Manufacture Date
      Manufacturer
      Manufacturing Assembly No
      Manufacturing Deviations
      Manufacturing Variant
      Matrix Size
      Maximum Power Budgeted
      Memory Usage High
      Mixed Mode State on Chassis Enabled
      Mnemonic
      Mode
      Name
      Name
      OES Shelf ID
      Operational IMM Family Type
      Operational Mode
      Operational Slots
      Operational State
      Over Temperature State
      Part Number
      Perform LED Test
      PF A Expected
      PF B Expected
      PoE External Power Supply Status
      PoE Power Supply Source
      PoE Power Supply Status
      Power Available
      Power Committed
      Power in Use
      Present Shelf Type
      Primary State
      PSE Maximum Power Budget
      PSE Power Available
      PSE Power Consumed
      Quality Value Level
      Remaining Power Capacity
      Secondary State
      Serial Number
      Serial Number
      Serial Number
      Shelf Description
      Shelf ID
      Shelf Type
      Site ID
      Site Name
      Software Part Number
      Software Version
      Standby Status
      State
      Sub-node Details
      Switch Model
      Switch Request
      Sync Messaging
      Timing Reference
      Total Power Capacity
      Total Slots
      Total Switching Capacity of SDH/SONET
      Total Switching Capacity of the first row
      Total Switching Capacity of the second row
      TRU Shelf ID
      TRU Type
      Unit Part Number
      Unknown Status
      Used Switching Capacity of SDH/SONET
      Used Switching Capacity of the first row
      Used Switching Capacity of the second row
      Virtual Chassis Local Slot
      Virtual Fabric Link State
      Voltage Floor
      Voltage Floor
      Voltage Threshold Tolerance
      Wavelength Tracker Enabled
    SoftwareUpgradePolicy parameters
      Activate Image
      Auto-Accept After Successful Software Activation
      Auto-Activate After Successful File Transfer
      Auto-Activate After Successful File Transfer
      Auto-Activate After Successful File Transfer
      Auto-Commit After Successful Software Activation
      CFlash Backup Root Path
      CFlash Image Root Path
      FGW Image Root Path
      Force Upgrade
      Forced Download
      FTP Password
      FTP Server Port
      FTP User ID
      Host Key Fingerprint
      Image Root Path
      Image Root Path
      Name
      Node Backup
      Node Backup Directory
      Policy ID
      Policy Type
      Root Directory
      Root Directory
      Running Directory
      Server IP
      SFTP Password
      SFTP Password
      SFTP Password
      SFTP Server Port
      SFTP Server Port
      SFTP User ID
      SFTP User ID
      SFTP User ID
      SFTP/FTP Password
      SFTP/FTP Server IP
      SFTP/FTP Server Port
      SFTP/FTP User ID
      Software Download
      Software Upgrade
      Software Upgrade Options
      Time To Wait Before Fallback To Previous Software Version
      Transfer Protocol
      Transfer Protocol
      Transfer Protocol
      Upgrade File Type
      Upgrade Options
      Use Active Server
    SRG (SnppSrgMapping, gmpls) parameters
      SRG
      SRG ID
    SRG (Srg, gmpls) parameters
      Domain ID
      SRG ID
      User Label
    STM Trail parameters
      A to Z
      Additional Information
      Administrative State
      Bidirectional
      Connection Type
      Customer
      Customer ID
      Customer Name
      EndPoint A Name
      EndPoint Z Name
      Force Create OCh XC
      Operational State
      Path Preference
      Plane Type
      Port A Pointer
      Port Z Pointer
      Protection Level
      Protection Type
      Rate
      Site A ID
      Site A Name
      Site Z ID
      Site Z Name
      Trail ID
      Trail Name
      Wave Key Assign Mode
      Z to A
    Sub-node parameters
      ASON Domain ID
      CP Node ID
      Local DP Node ID
      Local DP Node ID (IPv4)
      Rack ID
      Shelf
      Site ID
      Site Name
      SubNode ID
      SubNode Type
    Subscriber Site parameters
      Customer ID
      Customer Name
      Site ID
      Site ID
      Site Name
      Site Name
      Switch Name
    Tdm facility Protection Group parameters
      Active Conditions
      Active Facility
      Active Side
      APS Protection Mode
      Client Facility
      Connection Direction
      Description
      Description
      Facility
      Facility
      Facility
      Hold Off Timer
      Holdoff Time
      Id
      Local
      Local
      Port
      Primary State
      Protection Method
      Protection Mode
      Protection Switch
      Protection Switch
      Remote
      Remote
      Request For
      Revert Mode
      Secondary State
      Site ID
      Site ID
      Site Name
      Site Name
      Switch Direction
      Switch Direction
      Switch Status
      Switch Status
      Type
      VCn Rate
      Wait to Restore
    TE Link Endpoint parameters
      Administrative State
      Colors
      Cost
      DP Node IP Address
      Latency
      Link Type
      Operational State
      Remote CP Node
      Remote TE Link Endpoint ID
      Site ID
      Site Name
      SRGs
      TE Link Endpoint ID
      TE Link Pointer
      User label
    TE Link Exclusion parameters
      CP Node ID
      Domain ID
      DP Node ID
      DP Node ID
      Endpoint A ID
      Endpoint Z ID
      no
    TE Link parameters
      A End Shelf ID
      A End Site Name
      Administrative State
      Color
      Colors
      Cost
      Endpoint ID
      Endpoint ID
      Latency
      Operational State
      Site
      Site
      Site ID
      Site ID
      SRGs
      TE Link Endpoint
      TE Link Endpoint
      TE Link ID
      TE Link Name
      User Label
      User Label
      Z End Shelf ID
      Z End Site Name
    Termination Point parameters
      Access Port
      Administrative State
      Client VTS Number
      Egress VTS Number
      Egress VTS Number
      Ingress VTS Number
      Ingress VTS Number
      Line Port
      Line Port
      Line VTS Number
      Line VTS Number
      Name
      Operational State
      Optical Line Port ODUk Facility Object
      Optical Protection Line Port ODUk Facility Object
      Optsg
      Protection Egress VTS Number
      Protection Ingress VTS Number
      Termination Point
      Termination Point
      VTS Number
    Trail Site parameters
      Account Session ID
      Account Session ID (Control)
      Administrative State
      Creation Mode
      Customer ID
      Customer Name
      Description
      Dynamic Service Policy
      Monitor Access Interface Operational State
      Name
      Number of SAPs
      Operational State
      Service ID
      Service Name
      Site ID
      Site Name
      Site Position
      State Cause
      SVC Mgr Service ID
      Switch Name
      System ID
      Trail ID
      Trail Name
    Trail Termination Point parameters
      Administrative State
      Name
      Operational State
      Termination Point
      Termination Point
      Virtual Facility
      Virtual TP
    VC Cross Connect parameters
      Administrative State
      Aps Group Pointer
      Bidirectional
      Destination
      Operational State
      Primary State
      Protection State
      Rate
      Secondary State
      Site ID
      Site Name
      Source
      Xc Id
      Xc Name
    Virtual OCH Cross Connect parameters
      A-Z Rekey
      Administrative State
      Bidirectional
      Bit Rate / Encoding AZ
      Bit Rate / Encoding ZA
      Bit Rate AZ
      Bit Rate ZA
      Connection Type
      Destination
      Encoding AZ
      Encoding ZA
      Endpoint A
      Endpoint A
      Endpoint Z
      Endpoint Z
      ITU Channel
      OCH Connection ID
      OCH Trail Name
      Operational State
      Power Management Type
      Protection Mode
      Site ID
      Site Name
      Source
      Wave Key 1 AZ
      Wave Key 1 ZA
      Wave Key 2 AZ
      Wave Key 2 ZA
      Wave Key Assign Mode
      Z-A Rekey
    Virtual Plane HO-ODU Termination parameters
      Assigned Rate
      Ctp ID
      Name
      Site ID
      Site Name
  3. Alcatel-Lucent 1830 PSS (PSS-4, PSS-8, 16/32) parameters
    1830 PSS Performance Management Policy parameters
      Administrative State
      Description
      Displayed Name
      Password
      Policy ID
      Protocol
      User ID
    7210 and 1830 Access Ingress Policy parameters
      Allow any IPV6 Match
      Configuration Mode
      Default FC
      Description
      Discovery State
      Displayed Name
      Distribution Mode
      Dot1p classification type
      DSCP Classification Type
      Enable Inner Dot1p Match Criteria
      ID
      IP MAC Match Criteria type
      IP Match Criteria type
      IPV6 Match Criteria type
      Last Sync From
      Last Sync Time
      MAC Match Criteria type
      Match Criteria
      Number of QoS Classifiers
      Policy Scope
      Profile
      Profile
      Scope
      Site ID
      Site Name
    7210 and 1830 Netwerk Queue parameters
      Configuration Mode
      Description
      Discovery State
      Displayed Name
      Distribution Mode
      Last Sync From
      Last Sync Time
      Policy Scope
      Site ID
      Site Name
    7210 and 1830 Network Policy parameters
      Configuration Mode
      Default FC
      Default FC Profile
      Description
      Discovery State
      Displayed Name
      Distribution Mode
      Dot1p classification type
      DSCP Classification Type
      Last Sync From
      Last Sync Time
      MPLS LSP-EXP Profile
      Nw Mgr ID
      Policy Id
      Policy Scope
      Remarking
      Remarking Policy
      Remarking Type
      Scope
      Site ID
      Site Name
      Type
    7210 and 1830 Port Access Egress Policy parameters
      Configuration Mode
      Description
      Discovery State
      Displayed Name
      Distribution Mode
      Egress Remark
      ID
      Last Sync From
      Last Sync Time
      Policy Scope
      Remarking Policy
      Remarking Type
      Scope
      Site ID
      Site Name
    7210 and 1830 Port Scheduler Policy parameters
      Configuration Mode
      Description
      Discovery State
      Displayed Name
      Distribution Mode
      Last Sync From
      Last Sync Time
      Mode
      Policy Scope
      Site ID
      Site Name
      Strict
      Strict
      Strict
      Strict
      Strict
      Strict
      Strict
      Strict
      Weight
      Weight
      Weight
      Weight
      Weight
      Weight
      Weight
      Weight
    7210 and 1830 WRED Slope Policy parameters
      Configuration Mode
      Description
      Discovery State
      Displayed Name
      Distribution Mode
      Last Sync From
      Last Sync Time
      Policy Scope
      Site ID
      Site Name
    AccessIngressForwardingClass parameters
      Broadcast Meter ID
      Forwarding Class
      Meter ID
      Multicast Meter ID
      Multicast Queue ID
      Queue ID
      Unknown Meter ID
      Use DEI
    ACL MAC Filter parameters
      Application
      Configuration Mode
      Credit Control
      Credit Control Count
      Credit Control Start Entry
      Default Action
      Description
      Discovery State
      Distribution Mode
      Filter ID
      Filter Name
      Filter Type
      High Watermark
      High WaterMark
      Host Shared
      Host Shared PCC Rule Count
      Host Shared PCC Rule Start Entry
      Host Shared RADIUS Count
      Host Shared RADIUS Start Entry
      Last Sync From
      Last Sync Time
      Location
      Low Watermark
      Low WaterMark
      MAC Filter Type
      NE Filter Name
      Number of Host Shared Filters
      Policy Scope
      Policy Type
      RADIUS
      RADIUS Count
      RADIUS Start Entry
      Result
      Scope
      Site ID
      Site Name
      valueManager:hsWmark
    ACL Pattern Binding parameters
      Filter ID
      Packet Match Count
      Pattern
      Pattern ID
      Pattern Index
      System Default
    ACL Pattern parameters
      Action
      Configuration Mode
      Destination IP Address
      Destination IP Mask Prefix
      Discovery State
      Distribution Mode
      ICMP Code
      ICMP Error Reporting Enabled
      ICMP Type
      Internet Protocol
      Internet Protocol (value)
      IP Fragmentation
      Last Sync From
      Last Sync Time
      Pattern ID
      Policy Scope
      Site ID
      Site Name
      Source IP Address
      Source IP Mask Prefix
      System Default
      TCP Established
      TCP/UDP Destination Port
      TCP/UDP Source Port
    ACLManagement parameters
      ACL Configuration via SNMP Enabled
      Receive Action
      Transmit Action
    Alarm Profile parameters
      Category
      Condition
      Configuration Mode
      Default Severity
      Description
      Direction
      Discovery State
      Distribution Mode
      Last Sync From
      Last Sync Time
      Override Severity
      Policy Scope
      Site ID
      Site Name
    APS Group parameters
      Active Conditions
      Active Side
      APS Group ID
      APS Protection Mode
      Card Sub Type
      Channel
      Client ODUk Facility
      Connection Direction
      Description
      Holdoff Time
      Local
      Local
      ODU1 PTF
      ODUk Protected Interface Type
      Port
      Protection Method
      Protection Method
      Protection Method
      Protection ODUk facility
      Protection Port
      Protection Switch
      Protection VTS
      Remote
      Remote
      Request For
      Site ID
      Site Name
      Switch Direction
      Switch on Signal Degrade
      Switch Status
      Type
      Wait to Restore
      Working ODUk facility
      Working Port
      Working VTS
    Area parameters
      Description
      ID
      Instance Id
      Name
      Type
      Type Mismatch
      Version
    Area Range parameters
      Area
      Area Index
      Effect
      Link State DB Type
      Metric
      Network
      Prefix Length
      Routing Instance ID
      Routing Instance Name
      Site ID
      Site Name
      Version
    Area Site parameters
      ABR Default Route Cost
      Active Interfaces
      Adjacency Check
      Area Border Router Count
      Area ID
      Area Index
      AS Border Router Count
      Blackhole Range
      Default Cost
      DNS Opaque LSAs Distributed
      Enable Advertise Router Capability
      Import AS Extern
      Import Summary
      Instance ID
      Loop-free Alternate Exclude
      LSA Checksum Sum
      MetricType
      Name
      Name
      NSSA Router Translation
      Originate Default Route
      Redistribute External Routes
      Routing Instance ID
      Routing Instance Name
      Site ID
      Site Name
      Stub Support
      Total Interfaces
      Total Virtual Links
      Translator Role
      Translator Stability Interval
      Translator State
      Type
      Version
      Virtual Link IP
      Wave Key Opaque LSAs Distributed
    BackupPolicy parameters
      Auto Backup Scheme
      Auto Backup Threshold
      Auto Purge Scheme
      Auto Reboot After Successful Restore
      Backup 7705 Radio Database
      Boot Option File Mode
      CLI Config File Mode
      CLI Config Save Details
      CLI Debug Save Config File Mode
      Command to Apply After Backup
      Enable Backup
      File Compression
      File Compression
      File Compression
      File Compression
      File Transfer Server Directory
      File Transfer Server Port
      Is Default Policy
      Maximum Backup Age
      Name
      Number Of Backups
      Policy ID
      Policy Type
      Root Directory
      Save Certified Directory
      Save Certified Directory
      Save Network Directory
      Scheduled Backup Interval
      Scheduled Backup Scheme
      Scheduled Backup Sync Time
      Scheduled Backup Threshold
      Server IP
      SFTP/FTP Password
      SFTP/FTP Password
      SFTP/FTP Server Port
      SFTP/FTP User ID
      SFTP/FTP User ID
      Transfer Protocol
      Transfer Protocol
      Use Active Server
    Base Card parameters
      Administrative State
      Background Diagnostics Fault Reason
      Background Diagnostics State
      Boot Code Version
      CAM Error Count (Complex 0)
      CAM Error Count (Complex 1)
      Card Type
      CLEI Code
      Datapath Cell Error Count (Complex 0)
      Datapath Cell Error Count (Complex 1)
      Datapath Error Count (Complex 0)
      Datapath Error Count (Complex 1)
      EC Active State
      Egress FCS Error Count (Complex 0)
      Egress FCS Error Count (Complex 1)
      Equipped
      Firmware Revision Status
      Hardware Class
      Ingress FCS Error Count (Complex 0)
      Ingress FCS Error Count (Complex 1)
      Last Boot Up Reason
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Last Occurred
      Manufacture Date
      Manufacturer
      Manufacturing Assembly No
      Manufacturing Deviations
      Manufacturing Variant
      Memory Error Count (Complex 0)
      Memory Error Count (Complex 0)
      Memory Error Count (Complex 0)
      Memory Error Count (Complex 1)
      Memory Error Count (Complex 1)
      Memory Error Count (Complex 1)
      Memory Parity Error Count (Complex 0)
      Memory Parity Error Count (Complex 1)
      Memory Size
      Number Of Daughter Card Slots
      Number Of Installed Daughter Cards
      Number of UEs Served
      Operational State
      Part Number
      Pool Mode
      Serial Number
      Shelf ID
      Shelf Type
      Site ID
      Site ID
      Site Name
      Site Name
      Slot ID
      Slot Name
      Software Version
      Source Cards of Egress FCS Errors (Complex 0)
      Source Cards of Egress FCS Errors (Complex 1)
      System Resource Profile Policy
    Baseline parameters
      Baseline Type
      Baseline Type
      Baselined Value
      Baselined Value
      Force Baseline
      Force Baseline
      Last Baselined Time
      Last Baselined Time
      Reason
      Reason
    Card Firmware parameters
      Activation Time
      Active Release
      Assigned CardSubType
      Elapsed Time
      Equipped CardSubType
      Firmware Details
      Hitless Elapsed Time
      Hitless Load State
      Load State
      NE Software Version
      Product Type
      Provisioned Release
      Provisioned Time
      Shelf
      Site ID
      Site Management IP
      Site Name
      Slot
    Card Slot parameters
      Administrative State
      Assigned Card Sub Type
      Assigned Card Type
      Background Diagnostics Fault Reason
      Background Diagnostics State
      Capability
      Card Mismatch
      CLEI Code
      Commands
      Current Command
      Equipped Card Sub Type
      Equipped Card Type
      Failure Reason
      Firmware Revision Status
      Hardware Class
      Manufacture Date
      Manufacturer
      Manufacturing Assembly No
      Manufacturing Deviations
      Manufacturing Variant
      Node Timing
      Operational State
      Part Number
      Protection Type
      Restoration Criteria
      Serial Number
      Serving EPC Instance
      Shelf ID
      Shutdown IOM/IMM for Memory Parity Errors
      Site ID
      Site Name
      Slot
      Slot ID
      Status
      Supported Card Types
      Unknown Status
    Card Specifics parameters
      ACO LED
      Active Line Timing Reference
      Active Timing Reference
      Actual Clock Source
      Actual Tilt
      Add Path Output Power
      Add Path Target Power
      AINS Mode
      Alarm Profile
      Amp Rating
      Associated PSS Shelf EC
      Audible Alarm Cutoff
      Auto Provisioning
      Average Demux Loss
      Average Insertion Loss
      Average Insertion Loss Pad
      Average Mux Loss
      Baseline Span Loss
      Capacity
      Card Description
      Card Height
      Card Mode
      Card Name
      Card Rate Mode
      Card Temperature
      Card Width
      Clear Optical Intrusion Detected Alarm
      CLEI
      Clip-On Shelf ID
      Clock A (reference local)
      Clock B (reference local)
      Clock Delta
      Clock Mode Status
      Company ID
      Cross Card Service Enabled
      Date
      Dispersion Fiber Length
      Distance
      Engress OA Pump Bias Current
      Engress OA Pump Temperature
      Extra Data
      Factory ID
      Fan Speed
      Fiber Mode
      Fiber Type
      Firmware Upgrade Available
      Flow Continuity Monitoring
      Force Protection Switch
      Gain
      Gain Tilt
      High Temperature Threshold
      Impedance
      Ingress OA Pump Bias Current
      Ingress OA Pump Temperature
      Input Current 1
      Input Current 2
      Input Current 3
      Input Power 1
      Input Power 2
      Input Power 3
      Input to Output Gain
      Input Voltage 1
      Input Voltage 2
      Input Voltage 3
      Insertion Loss Slope
      Insertion Loss Slope Pad
      ISON Mode
      Laser Temperature
      Level in Optical Node
      Loopback Message Interval
      Loopback Reply Timeout
      Loss Threshold
      Low Temperature Threshold
      Maximum Add Channel Count
      Maximum Current
      Maximum Gain
      Maximum Power
      Measured Current
      Measured Power
      Minimum Gain
      Mnemonic
      Monitoring Enabled
      Node Critical LED Color
      Node Major LED Color
      Node Minor LED Color
      Node Warning LED Color
      Operational Capability
      Optical Interconnect Line Count
      Output Selection
      Output VOA Setting
      Per-Channel Output Power
      PF Slot 1 (Reference local)
      PF Slot 1 (Reference local)
      PF Slot 1 (Reference PF slot 11)
      PF Slot 1 (Reference PF slot 7)
      PF Slot 11 (Reference local)
      PF Slot 19 (Reference local)
      PF Slot 19 (Reference PF slot 36)
      PF Slot 36 (Reference local)
      PF Slot 7 (Reference local)
      PMD
      Polling Period
      Primary State
      Protection LED Color
      Protection LED Color
      Protection Mode
      Protection Setting
      Protection Setting
      Provisioned Clock Source
      Provisioned Distance
      Provisioned Fiber Type
      PTP LED Color
      Pump1 Bias Current
      Pump1 Bias Current
      Pump1 Temperature
      Pump1 Temperature
      Pump2 Bias Current
      Pump2 Bias Current
      Pump2 Temperature
      Pump2 Temperature
      Pump3 Bias Current
      Pump3 Bias Current
      Pump3 Temperature
      Pump3 Temperature
      Pump4 Bias Current
      Pump4 Bias Current
      Pump4 Temperature
      Pump4 Temperature
      Pump5 Bias Current
      Pump5 Temperature
      Pump6 Bias current
      Pump6 Temperature
      Quality Level Threshold
      Raman Pump1 Bias Current
      Raman Pump1 Temperature
      Raman Pump2 Bias Current
      Raman Pump2 Temperature
      Raman Pump3 Bias Current
      Raman Pump3 Temperature
      Raman Pump4 Bias Current
      Raman Pump4 Temperature
      Secondary State
      Serial Number
      Signal Output Power
      Size
      Software Load
      Software Part Number
      Span Loss
      SSBit
      Standby Controller Ready to Protect
      State Qualifier
      Status LED Color
      SVLAN Tag Protocol ID1
      SVLAN Tag Protocol ID2
      SVLAN Tag Protocol ID3
      SVLAN Tag Protocol ID4
      Switch Request
      Switch Request
      Switch To Timing Reference
      Switch To Timing Reference
      Switch Type
      Sync Status Messaging
      Sync Status Messaging
      SyncE Support
      System Quality Level
      Tag Protocol ID
      Target Tilt
      Temperature Tolerance
      Total Dispersion Fit
      Total Input Power
      Total Output Power
      Unit Part Number
      Wait To Restore
    Card TCA Profile Assignment parameters
      Clear Bins
      Interval
      Number of Bins
      Profile Type
      TCA Profile
    Card TCA Profiles parameters
      Availability Interval for 1-day FLR
      Availability Interval for 15-mins FLR
      Card Slot ID
      Configuration Mode
      Description
      Discovery State
      Distribution Mode
      Interval for 1-day FLR
      Last Sync From
      Last Sync Time
      Number of 1-day Bins
      Number of 15-min Bins
      Origin Site Name
      Policy Scope
      Shelf ID
      Site ID
      Site Name
      TCA Profile ID
      TCA Profile Type
    Card TCA Thresholds parameters
      TCA Interval Type
      TCA Profile ID
      TCA Profile Type
      TCA Subgroup
      TCA Variable Name
      Threshold Value
    CFM Link Trace parameters
      Accounting Files
      Administrative State
      Aggregated With
      Continuous Execution
      Description
      Forwarding Class
      Forwarding Profile
      Global ID
      Global MEG
      Global MEG
      ID
      Last Generated
      Maximum Failures
      Name
      NE Schedulable
      Number of Test Packets
      Originating MEP
      Originating Tested Entity
      Packet Interval
      Packet Timeout
      Probe History
      SAA Accounting Policy
      Target MAC Address
      Test Definition
      Test Policy
      Test Result Storage
      Test Suite
      Tested Entity
      Trap Generation
      TTL
      TTL
      Weight
    CFM LM Test parameters
      Accounting Files
      Administrative State
      Aggregated With
      Card TCA Profile
      Continuous Execution
      Description
      Forwarding Class
      Forwarding Profile
      Global ID
      Global MEG
      Global MEG
      ID
      Interval
      Last Generated
      Name
      NE Schedulable
      Number of Test Packets
      Number of Test Packets
      Originating MEP
      Originating Tested Entity
      Packet Failure Threshold
      Packet Interval
      Packet Interval Units
      Priority
      Probe History
      SAA Accounting Policy
      Size
      Target MAC Address
      Test Definition
      Test Failure Threshold
      Test Policy
      Test Result Storage
      Test Suite
      Tested Entity
      Trap Generation
      Weight
    CFM Loopback parameters
      Accounting Files
      Administrative State
      Aggregated With
      Continuous Execution
      Data Size
      Data TLV Size or Padding
      Description
      Enable Target MEP ID
      Forwarding Class
      Forwarding Profile
      Global ID
      Global MEG
      Global MEG
      ID
      Last Generated
      LBM Interval
      LBM Padding Size
      LBM Timeout
      Multicast
      Name
      NE Schedulable
      Number of Test Packets
      Number of Test Packets
      Originating MEP
      Originating Tested Entity
      Packet Failure Threshold
      Packet Interval
      Packet Timeout
      Probe History
      SAA Accounting Policy
      Size
      Target MAC Address
      Target MEP ID
      Test Definition
      Test Failure Threshold
      Test Interval
      Test Policy
      Test Result Storage
      Test Suite
      Tested Entity
      Trap Generation
      VLAN Drop Enable
      VLAN Priority
      Weight
    CFM One Way Delay Test parameters
      Administrative State
      Aggregated With
      Description
      Global ID
      Global MEG
      Global MEG
      ID
      Last Generated
      Name
      NE Schedulable
      Originating MEP
      Originating Tested Entity
      Priority
      Probe History
      Target MAC Address
      Test Definition
      Test Policy
      Test Suite
      Tested Entity
      Weight
    CFM Two Way Delay Test parameters
      Accounting Files
      Administrative State
      Aggregated With
      Card TCA Profile
      Continuous Execution
      Data Size
      Description
      Enable Target MEP ID
      Forwarding Class
      Forwarding Profile
      Global ID
      Global MEG
      Global MEG
      ID
      Last Generated
      Name
      NE Schedulable
      Number of Test Packets
      Originating MEP
      Originating Tested Entity
      Packet Failure Threshold
      Packet Interval
      Packet Interval Units
      Packet Timeout
      Probe History
      SAA Accounting Policy
      Size
      Target MAC Address
      Target MEP ID
      Test Definition
      Test Failure Threshold
      Test Interval
      Test Policy
      Test Result Storage
      Test Suite
      Tested Entity
      Trap Generation
      VLAN Priority
      Weight
    CFM Two Way SLM Test parameters
      Accounting Files
      Administrative State
      Aggregated With
      Card TCA Profile
      Continuous Execution
      Data Size
      Description
      Forwarding Class
      Forwarding Profile
      Global ID
      Global MEG
      Global MEG
      ID
      Interval
      Interval
      Last Generated
      Name
      NE Schedulable
      Number of Test Packets
      Number of Test Packets
      Originating MEP
      Originating Tested Entity
      Packet Failure Threshold
      Packet Interval
      Packet Interval Units
      Packet Timeout
      Priority
      Probe History
      SAA Accounting Policy
      Size
      Target MAC Address
      Test Definition
      Test Failure Threshold
      Test Policy
      Test Result Storage
      Test Suite
      Tested Entity
      Timeout
      Trap Generation
      Weight
    Channel Disposition parameters
      Add
      Channel
      Drop
    Channel Summary parameters
      Channel
      Channel Power Detected
      Expected Wave Keys Present
      Port Name
      Site Name
      Unexpected Wave Keys Present
      Wave Keys Processed
      Wave Keys Provisioned
    Command parameters
      Command
      Command Type
    Control Processor parameters
      Administrative State
      Background Diagnostics Fault Reason
      Background Diagnostics State
      CLEI Code
      CPU Type
      Firmware Revision Status
      Hardware Class
      Hold on Reboot
      Manufacture Date
      Manufacturer
      Manufacturing Assembly No
      Manufacturing Deviations
      Manufacturing Variant
      Memory Size
      Number of CPUs
      Operational State
      Oscillator Type
      Part Number
      Redundant Status
      Serial Number
      Site ID
      Site ID
      Site Name
      Site Name
      Slot ID
    DirectInterfaceCtp parameters
      Interface ID
      Interface Name
      Routing Instance ID
      Routing Instance Name
      Site ID
      Site Name
    Discovered Remote Managed Device parameters
      Device Type
      Interface ID
      MAC Address
      Multicast MAC Address
      OUI
      Site ID
      Site Name
    DryContact parameters
      Alarm Clear Message
      Alarm Severity
      Alarm Trigger Message
      Connected To
      Control Status
      Control Type
      Description
      Dry Contact ID
      External Alarm Status
      Last Time Changed
      Monitored Status
      Name
      Pin Number
      Polarity
    Dynamic Tilt Adjustment parameters
      Card Sub Type
      Connector Loss to Span
      Description
      Direction
      Execute Command
      Post-Compensated SRS Tilt Fraction
      Pre-Compensated Span Loss Tilt
      Pre-Compensated SRS Tilt Fraction
      Result
      Site ID
      Site Name
      SRS Tilt Calculation Coefficient
      SRS Tilt Calculation Multiplier
      Status
      Tilt Calculation Offset
      Topology
      Type
    Equipment Alarm Profile parameters
      Category
      Condition
      Default Severity
      Override Severity
    Ethernet Port parameters
      Access Egress
      Actual Duplex
      Actual Duplex
      Advertised Capability
      Advertised Capability
      Aggregate Rate Limit
      Authenticate
      Auto-negotiate
      Broadcast Frame Rate
      Broadcast Limit
      CFM LoopBack Mode
      CFM LoopBack VLAN Range
      Connection Type
      Connection Type (Operational)
      Connector Type
      CRC SD Threshold
      CRC SD Threshold Multiplier
      CRC SF Threshold
      CRC SF Threshold Multiplier
      Default VLAN
      Default VLAN Enable
      Default VLAN Restore
      Destination MAC Address
      Detection
      Detection Status
      Dot1 Q Acceptable Frames
      Dot1 Q Ethertype
      Down on Internal MAC Tx Error
      Down When Looped
      Down When Looped Status
      Duplex
      Duplex(Actual)
      Egress CIR
      Egress Enabled
      Egress Max Burst Rate
      Egress Max-Burst
      Egress Rate
      Egress Scheduler Mode
      Egress Unshaped Network Interface CIR
      Egress Unshaped SAP CIR
      Enable
      Enable Broadcast Limit Mode
      Enable Multicast Limit Mode
      Enable Port Mobility
      Enable Unknown Unicast Limit Mode
      Ethernet Down Reason
      Frame Base Accounting
      Ignore BPDU
      Ingress CBS
      Ingress CIR
      Ingress Enabled
      Ingress Filtering
      Ingress Max Burst Rate
      Ingress Rate
      Inter-Frame Gap
      IP MTU
      Keep-Alive Interval (Sec)
      LACP Tunnel
      Loopback Messages Dropped
      Loopback Messages Received
      Loopback Reply Transmitted
      MDI/MDX
      Media Mode
      Minimum Frame Length
      Monitor Oper Group
      Multicast Frame Rate
      Multicast Ingress
      Multicast Limit
      Network Egress
      Oper Group
      Oper Physical Tx Clock
      Operational Flow
      Operational State
      Outstanding Alarms
      PBB Ethertype
      Persistent Loopback
      Phy Tx Clock
      Polling Timer UNI-C (T391)
      Polling Verification Timer (T392)
      Port Clock Mode
      Port ID
      Port Name
      Protocols
      Provider Bridge Type
      PTP Asymmetry
      Q in Q Ethertype
      Received Quality Level
      Report Alarms
      Retry Timeout (Sec)
      S-VLAN TPID
      SAP
      SAP QoS Marking
      SFLOW
      Single Fiber
      Site ID
      Source MAC Address
      Src Pause
      SSM Code-Type
      Status Counter (N393)
      Swap Mac Address
      Symbol Alarm Reason
      Symbol Error Count
      Symbol Monitor Status
      Symbol SD Threshold
      Symbol SD Threshold Multiplier
      Symbol SF Threshold
      Symbol SF Threshold Multiplier
      Symbol Window Size
      Synchronous Ethernet Capability
      Synchronous Status Messages
      Time
      Time Remaining
      Timestamp Capable
      Transmitted Quality Level
      Tx DUS/DNU
      Type
      Type
      Type
      Type
      UNI Identifier
      UNI Mode
      UNI Priority
      UNI Type
      Unknown Unicast Frame Rate
      Unknown Unicast Limit
      Untag C-VLAN
      Use Broadcast Address
      Vlan Filter
      Window Size
      XGig Mode
    Ethernet Ring Alarm Category parameters
      Category
      Condition
      Default Severity
      Ethernet Ring ID
      Override Severity
    Ethernet Ring Element parameters
      Administrative State
      APS Tx PDU
      CCM Hold Time Down
      CCM Hold Time Up
      Compatible Version
      Description
      Ethernet Ring Defect Status
      Ethernet Ring ID
      Ethernet Ring Interconnect
      Ethernet Ring Manager
      Guard Time
      ID
      MEG Level
      Operational State
      Propagate Topology Change
      Protection State
      R-APS Vlan Id
      Radio Ring Topology
      Request/State
      Revert ERP Version Fallback
      Revert Time
      Revert Time Count Down
      Revertive Mode
      Ring Element Location
      Ring Node ID
      Ring Protection Link Type
      Ring Type
      Service
      Site ID
      Status
      Sub-Code
      Switch Command
      Switch Input
      Type
      Virtual Channel
    Ethernet Ring parameters
      Control SAP
      Path Endpoint
    Ethernet Ring Path Endpoint parameters
      Actual Maximum Frame Size
      Administrative State
      APS Rx PDU
      Control SAP Tag
      Current State
      Description
      Encapsulation Type
      Ethernet Path
      Forwarding State
      Forwarding State Change Time
      Maximum Frame Size Mismatch
      MEG ID
      Member Port
      OAM Event
      Operational State
      Path Endpoint Type
      Path ID
      Port
      Port ID
      Provisioned Maximum Frame Size
      R-APS Tag (Inner Encapsulation Value)
      R-APS Tag (Outer Encapsulation Value)
      Remote MEP
      Request/State
      Ring Element ID
      Site ID
      Site Name
      Status
      Sub-Code
      Switch Command
      Underlying Port State
    EthernetCtp parameters
      Assigned Rate
      CE-VLAN ID
      Ctp ID
      Name
      S-VLAN ID
      Site ID
      Site Name
      VTS Direction
    Fan Tray parameters
      Administrative State
      Background Diagnostics Fault Reason
      Background Diagnostics State
      CLEI Code
      Description
      Device State
      Fan Type
      Firmware Revision Status
      Hardware Class
      Manufacture Date
      Manufacturer
      Manufacturing Assembly No
      Manufacturing Deviations
      Manufacturing Variant
      Operational State
      Part Number
      Power Level
      Serial Number
      Shelf ID
      Site ID
      Site Name
      Speed
      Tray ID
    FIB Entry parameters
      Backbone Destination MAC Address
      Customer ID
      MAC Address
      Name
      Node ID
      Node Name
      Number of EPIPEs
      Number of I-VPLS MAC
      Operational Spoke SDP Binding
      Protected
      Service ID
      Type
    FrameBasedAccounting parameters
      Egress
      Ingress
    Hop parameters
      Administrative State
      AINS Enabled
      Channel
      CTP
      Hop Order
      Operational State
      Port
      Port Description
      Rate
      Site ID
      Site Name
    IEEE 1588 PTP Clock parameters
      Accuracy
      Admin State
      Clock Accuracy
      Clock Announce Interval
      Clock Announce Rx Timeout
      Clock Class
      Clock Class
      Clock Enabled
      Clock ID
      Clock ID
      Clock ID
      Clock Index
      Clock Local Priority
      Clock MDA
      Clock Priority 1
      Clock Priority 2
      Clock Slave Only
      Clock State
      Clock Synchronization State
      Clock Time Reference Priority
      Clock Type
      Clock Variance
      Current Time
      Current UTC Offset
      Current UTC Offset Valid
      Domain
      Dynamic Peers
      Forward Weight
      Frequency Source
      Frequency Traceable
      GM Clock Accuracy
      GM Clock Class
      GM Clock Id
      GM Clock Priority1
      GM Clock Priority2
      GM Clock Variance
      Grandmaster Clock Accuracy
      Grandmaster Clock Class
      Grandmaster Clock ID
      Grandmaster Offset Scaled Log Variance
      Grandmaster Priority 1
      Grandmaster Priority 2
      Leap 59
      Leap 61
      Locked PTP Port
      Log sync interval
      Mean Path Delay
      Network Type
      Number of Ports
      Number of PTP Ports
      Offset From Master
      Offset Scaled Log Variance
      Offset Scaled Log Variance
      Oper Frequency Source
      Parent Clock Address
      Parent Clock Address Type
      Parent Clock Ethernet Port
      Parent Clock ID
      Parent Clock MacAddress
      Parent Clock Transport Type
      Parent Port Number
      Peer Limit
      Phase Change Rate
      Priority 1
      Priority 2
      PTP Port
      PTP Profile
      PTP Time Source
      PTP Timescale
      Reverse Weight
      Site ID
      Source Interface
      Statistics Collected
      Steps Removed
      Time Traceable
      Two Step
      Two-Step Flag
      Use Node Time
      Wait To Restore
    IEEE 1588 PTP Port parameters
      Addressing Mode
      Admin State
      Administrative State
      Anno rx timeouts
      Announce Message Interval
      Announce Message Rx
      Announce Message Tx
      Announce Receipt Timeout
      Associated Physical Port
      Associated VLAN ID
      Asymmetry Correction
      Cfg Delay Req Rate
      Cfg Sync Rate
      Delay Mechanism
      Delay Request Interval
      Delay Request Message Rx
      Delay Request Message Tx
      Delay Response Message Rx
      Delay Response Message Tx
      Destination MAC Address
      Encapsulation Type
      Link Asymmetry Measurement Status
      Local Priority
      Log anno interval
      Log sync interval
      Management Message Rx
      Management Message Tx
      Measured Link Asymmetry
      Mulicast MAC Addr
      Neighbors
      Not Slave
      Number Of Peers
      Peer Path Delay
      Port
      Port Id
      Port ID
      Port Name
      Port Role
      Port Status
      PTP IO Timing Port
      PTP Oper State
      PTP Port Number
      PTP Port State
      PTP Port State
      PTP Version
      Signalling Message Rx
      Signalling Message Tx
      Sync Message Interval
      Sync Message Rx
      Sync Message Tx
      Timestamp Point
      Trigger Link Asymmetry Measurement
      Two-Step Flag
      Unicast
      Unicast Negotiation Enabled
    IEEE 802.3ah OAM parameters
      Administrative State
      Advertise Link Monitoring Capabilities
      Average Delay
      Configuration Revision
      Critical Event Notify
      Defect
      Duplicate Event Rx
      Duplicate Event Tx
      Dying Gasp Notify
      Enabled
      Enabled
      Enabled
      Enabled
      Frames Delay
      Frames Lost Due To OAM
      Frames Received
      Frames Sent
      Functions Supported
      Grace Tx State
      Grace Tx State Enable
      Hold Time
      Ignore EFM State
      Information Rx
      Information Tx
      L1-Ping Status
      Link Monitoring Enabled
      Local SF Crossing Event Burst
      Local SF Crossing Port Action
      Log-history
      Loop Detected
      Loopback Control Rx
      Loopback Control Tx
      Loopback Status
      Max. PDU Size
      Mode
      Multiplier
      Near-end Errored Symbols Rx
      Notify
      Notify
      Notify
      Notify
      Number of Frames
      Operational Status
      Peer Configuration Revision
      Peer Functions Supported
      Peer Grace Rx
      Peer MAC Address
      Peer Max PDU Size
      Peer Mode
      Peer Vendor Info
      Peer Vendor OUI
      Reaction to Peer Critical Event
      Reaction to Peer Dying Gasp
      Reaction to Peer Event Notification
      Reaction to Peer Link Fault Flag in OAMPDU
      Received Remote Loopback Requests
      SD Threshold
      SD Threshold
      SD Threshold
      SD Threshold
      Set Local Loopback
      Set Remote Loopback
      SF Threshold
      SF Threshold
      SF Threshold
      SF Threshold
      Start L1-Ping
      Statistics
      Transmit Interval
      Tunneling
      Unique Event Rx
      Unique Event Tx
      Unsupported Codes Rx
      Unsupported Codes Tx
      Window
      Window
      Window
      Window
      Window
    IgmpSnpgMrouter parameters
      Expiry Time
      General Query Interval
      IGMP Version
      Location
      Maximum Response Interval
      Multicast Router Address
      Robust Count
      SAP/SDP
      Uptime
    IP Filter Cfg parameters
      Direction
      Filter Enabled
      Filter ID
      Filter ID
      Port Name
      System Default
      yes
    IpMatch parameters
      Description
      Destination IP
      Destination Port
      Displayed Name
      DSCP
      Dst Mask
      Forwarding Class
      Fragment
      ID
      Port Dst
      Port Src
      Precedence Mask
      Precedence Value
      Profile
      Protocol
      Source IP
      Source Port
      Src Mask
      To Port Dst
      To Port Src
      valueManager:destinationIp
      valueManager:destinationPort
      valueManager:dscp
      valueManager:fragment
      valueManager:ipPrecedence
      valueManager:sourceIp
      valueManager:sourcePort
    Ipv6Match parameters
      Description
      Destination IP
      Destination Port
      Displayed Name
      DSCP
      Dst Mask
      Forwarding Class
      ID
      Port Dst
      Port Src
      Precedence Mask
      Precedence Value
      Profile
      Protocol
      Source IP
      Source Port
      Src Mask
      To Port Dst
      To Port Src
      valueManager:destinationIp
      valueManager:destinationPort
      valueManager:dscp
      valueManager:ipPrecedence
      valueManager:sourceIp
      valueManager:sourcePort
    L2 Access Interface FIB parameters
      Aging Enabled
      Auto Learn MAC Protect
      Discard Unknown Source
      Entries
      Inner Encap Value
      Learning Enabled
      Limit MAC Move
      Limit MAC Move Level
      MAC Address
      MAC Move Left after Max. Rate Exceeded
      MAC Move Time before Next Auto Up
      Maximum Entries
      Outer Encap Value
      Port
      Port ID
      Restrict Protected Source
      Restrict Protected Source Action
      Restrict Unprotected Destination
      Service ID
      Service Name
      Site ID
      Site Name
      Static Entries
      Subscriber ID
      Subscriber Name
    L2 Access Interface parameters
      Accounting Policy
      Active State
      Actual Maximum Frame Size
      Administrative State
      Aggregate CIR
      Aggregate CIR
      Aggregate Rate Limit
      Aggregate Rate Limit
      Aggregate Shaper CIR Rate
      Aggregate Shaper PIR Rate
      Aggregation
      Aggregation Scheduler
      Assign Aggregate CIR
      Assign Aggregate CIR
      Assign Aggregate Rate Limit
      Assign Aggregate Rate Limit
      Collect Accounting Statistics
      Customer ID
      Customer Name
      Description
      Destination MAC Address
      Displayed Name
      Egress Aggregate Rate Limit CIR
      Egress Aggregate Rate Limit PIR
      Egress Aggregate Shaper Rate
      Egress Filter
      Egress Mark QinQ Top Bits Only
      Egress Meter Burst
      Egress Meter Rate
      Egress Policy
      Egress Queue Group Template Policy
      Egress Scheduler
      Enable Aggregate Rate Limit
      Enable Egress Forwarding
      Enable Egress Packets Forwarding
      Enable Ingress Forwarding
      Enable Port Redundancy
      Encapsulation Type
      Endpoint
      Ethernet CFM Monitor Flags
      Frame-Based Accounting
      Ingress Aggregate Shaper Rate
      Ingress Counter Mode
      Ingress Counter Type
      Ingress Filter
      Ingress Match QinQ Dot1P
      Ingress Meter
      Ingress Meter Burst
      Ingress Meter Rate
      Ingress Policy
      Ingress Queue Group Template Policy
      Ingress Scheduler
      Inner Encapsulation Value
      Instance ID
      IPv6 Egress Filter
      IPv6 Ingress Filter
      Limit Unused Bandwidth
      MAC Monitoring
      Manual Switch Backup State
      MAX
      MAX
      MAX
      MAX
      Maximum Frame Size Mismatch
      Name
      NE DDoS Protection Policy
      NE DoS Protection
      Operational State
      Outer Encapsulation Value
      Override
      Packet Byte Offset (bytes)
      Policer Control Policy
      Policer Control Policy
      Port Description
      Port ID
      Port Name
      Provisioned Maximum Frame Size
      SAS Egress Policy
      SAS Ingress Policy
      Scheduler Mode
      Scheduler Mode
      Service Description
      Service ID
      Service Name
      Service Type
      Site ID
      Site Name
      Source MAC Address
      State Cause
      State Qualifier
      SVC Mgr Service ID
      Terminated Port Class Name
      Terminating Port
      Time of Day Suite
      Underlying Port State
      Use Shared Queue
      valueManager:macAddr
      WRR Policy
    L2AccessInterfaceIgmpSnpgCfg parameters
      Available Bandwidth for Mandatory Channels
      Available Bandwidth for Optional Channels
      Bandwidth Values in Transit
      Constraint Administration State
      Disable Router Alert Check
      Fast-Leave
      General Query Interval
      IGMP Version
      Import Policy
      In Use Bandwidth by Mandatory Channels
      In Use Bandwidth by Optional Channels
      Last Member Query Interval
      Mandatory Bandwidth
      Maximum Number of Group Sources per Group
      Maximum Number of Groups
      Maximum Number of Sources per Group
      Maximum Response Interval
      Multicast CAC Policy
      Multicast Router Attached
      Name
      Robust Count
      Send Queries
      Unconstrained Bandwidth
      Use Lag Port Weight
    L2AccessInterfaceIgmpSnpgStaticMcastGrp parameters
      Group Address
      Source Address
    LACP Configuration parameters
      Active Sub-Group Selection Criteria
      Actor Administration Key
      Actor Operational Key
      Actor System ID
      Actor System Priority
      Candidate Sub Group
      Hold Time Down
      Infinite
      LACP
      LACP
      LACP Enabled
      LACP Mode
      LACP MUX Control
      LACP System ID
      LACP System Priority
      LACP Transmit Interval
      LACP Transmit Standby
      Number of Sub-Groups
      Partner Administration Key
      Partner Operational Key
      Partner System ID
      Partner System Priority
      Selected Sub Group
      Slave to Partner
      Standby Signalling
      Sub Group Hold Down Time
      Timeout
    LAG Alarm Profile parameters
      Category
      Condition
      Default Severity
      Direction
      LAG ID
      Override Severity
    LAG Member parameters
      Active/Standby
      Actual Maximum Frame Size
      Admin Key
      Admin Key
      Admin Port
      Admin Port Priority
      Admin State
      Admin State
      Admin System Id
      Admin System Priority
      Attached LAG ID
      Encapsulation Type
      Inner Encapsulation Value
      LACP
      LAG ID
      Maximum Frame Size Mismatch
      Member Name
      Number of Rx Illegal Packets
      Number of Rx LACP Packets
      Number of Tx LACP Packets
      Number of Unknown Packets
      Oper Key
      Oper Port Priority
      Oper State
      Operational Port Number
      Outer Encapsulation Value
      Partner Oper Key
      Partner Oper Port
      Partner Oper State
      Partner Oper System Id
      Partner Oper System Priority
      Port
      Port ID
      Port Number
      Primary Member
      Priority
      Provisioned Maximum Frame Size
      Selected LAG ID
      Site ID
      Site Name
      Sub-Group ID
      System Id
      System Priority
      Underlying Port State
    LAG parameters
      Accounting Policy
      Accounting Policy
      Actual Speed
      Administrative State
      Administrative State
      Administrative State
      Auto Rebalance
      Automatic VLAN Binding
      Background Diagnostics Fault Reason
      Background Diagnostics State
      Bandwidth
      Class
      CLEI Code
      CLI Name
      Collect Accounting Statistics
      Collect Accounting Statistics
      Combiner
      Configured Address
      Configured Speed
      Containing Equipment Status
      Description
      Description
      Disable Soft Reset Extension
      Dynamic Cost
      Egress Available Bandwidth
      Enable DEI
      Enable LAG Access Including Egress Hash Config
      Enable Per Forwarding Path Egress Queue
      Enable Per Forwarding Path Ingress Queue
      Enable SAP Per Flex Path
      Encap Type
      Equipped
      Firmware Revision Status
      Hardware Address
      Hardware Class
      Hash
      Hold Time Down
      Hold Time Units
      Hold Time Up
      Holding IGH
      HSMDA Egress Scheduler Policy
      Ingress Available Bandwidth
      Interface ID
      L2 Profile
      L2 Profile
      L2Uplink
      Lag Aggregation Type
      LAG ID
      Link Trap
      Link Up
      Load Balance Algorithm
      LOS Propagation
      LPT Consequent Action
      Manufacture Date
      Manufacturer
      Manufacturing Assembly No
      Manufacturing Deviations
      Manufacturing Variant
      MC LAG Info
      MC LAG Member Info
      Min Size
      Mode
      MTU
      MTU
      Name
      Name
      Network Queue Policy Name
      Number of Attached Ports
      Number of Selected Ports
      Operational Speed
      Operational State
      Operational State
      Part Number
      Per-Link Hashing
      Port Scheduler Policy
      Port Threshold
      Port Threshold Action
      Port Type
      Port Usage
      Port Weight Speed
      Previous State
      Primary Member
      QoS Adaptation
      Queue 1
      Queue 2
      Queue 3
      Queue 4
      Queue 5
      Queue 6
      Queue 7
      Queue 8
      Reason Down
      Role
      Serial Number
      Site ID
      Site Name
      Size
      Size
      SPB Service Mode
      Speed
      Split Horizon Group
      State
      Status
      Subrack Connection
      SVLAN Tag Protocol ID
      Type
      UNI Profile
      UNI Profile
      User label
      Vlan Xlation Mode
      VPLS Mode
      Wait to Restore
      Weight Threshold
      Weight Threshold Action
      Weighted
    Linear Power Adjustment parameters
      Add Direction LD
      Calculated Required Gain
      Card Sub Type
      Description
      Direction
      Drop Direction LD
      Execute Command
      Gain Adjustment Calculation Offset
      Gain at Commissioning Complete
      Result
      Site ID
      Site Name
      Status
      Topology
      Type
      WSS Overhead
    LineReference parameters
      Actual Quality Level
      Administrative Status
      Alarm Profile
      Assigned Port
      Assigned Port
      Assigned Port
      Line Reference
      Lockout Status
      Operational Status
      Output Timing Lockout Status
      Output Timing Priority
      Primary State
      Priority
      Provisioned Quality Level
      QL Processing
      Signal Status
      SSM Status
    LO-ODUk Cross Connect parameters
      A-End
      Bidirectional
      Cross Connect Id
      Destination
      ID
      Name
      Name
      Protection State
      Rate
      Rate
      Site ID
      Site Name
      Source
      Z-End
    LO-ODUk parameters
      Admin State
      Assigned Rate
      Ctp ID
      Expected TTI
      Incoming TTI
      Name
      ODUk ID
      ODUk Type
      Site ID
      Site Name
      Site Name
      Timeslots
      TTI Comparison Enabled
      TTI Mismatch Response Enabled
      TTI Status
    MacFilterEntry parameters
      Action
      Administrative State
      Application
      Description
      Destination MAC
      Displayed Name
      Displayed Name
      Dot1p
      Dot1p Mask
      DSAP
      DSAP Mask
      Dst Mask
      Encap Type
      Entry ID
      Entry Type
      Ether Type
      Filter ID
      Frame Type
      fwdLspPointer
      fwdMplsLspPointer
      fwdVprnPointer
      Inner Dot1p
      Inner Dot1p Mask
      Inner Encap Value
      Inner Tag Value
      Inner Tag VID Mask
      Is Local
      ISID High
      ISID Low
      Log ID
      LSP Type
      Outer Dot1p
      Outer Dot1p Mask
      Outer Encap Value
      Outer Tag Value
      Outer Tag VID Mask
      Path ID
      Policy Type
      Port Name
      Redirect Policy
      Redirect URL
      Router Instance Type
      Service ID
      SNAP OUI
      SNAP PID
      Source MAC
      Src Mask
      SSAP
      SSAP Mask
      Time Range
      valueManager:dot1p
      valueManager:dsap
      valueManager:dstMac
      valueManager:ethernetType
      valueManager:innerDot1p
      valueManager:isid
      valueManager:outerDot1p
      valueManager:scrMac
      valueManager:snap
      valueManager:ssap
      valueManager:vidInnerTag
      valueManager:vidOuterTag
      VC ID
    MacMatch parameters
      Description
      Destination MAC
      Destination Mask
      Displayed Name
      Dot1p
      Dot1p Mask
      Ether Type
      Forwarding Class
      Frame Type
      ID
      Inner Dot1p
      Inner Dot1p Mask
      Inner Tag Value
      Inner Tag VID Mask
      Outer Dot1p
      Outer Dot1p Mask
      Outer Tag Value
      Outer Tag VID Mask
      Profile
      Source MAC
      Source Mask
      valueManager:dot1p
      valueManager:dstMac
      valueManager:ethernetType
      valueManager:ingrMacVidInnerTag
      valueManager:ingrMacVidOuterTag
      valueManager:innerDot1p
      valueManager:outerDot1p
      valueManager:scrMac
    Maintenance Domain parameters
      Configuration Mode
      Description
      Discovery State
      Distribution Mode
      Last Sync From
      Last Sync Time
      Level
      Maintenance Domain ID
      MD Mgr Object ID
      MHF-Creation
      MHF-Id-Permission
      Name
      Name Type
      Policy Scope
      Site ID
      Site Name
    Management Port parameters
      Accounting Policy
      Accounting Policy
      Actual Speed
      Administrative State
      Administrative State
      Automatic VLAN Binding
      Background Diagnostics Fault Reason
      Background Diagnostics State
      Class
      CLEI Code
      CLI Name
      Collect Accounting Statistics
      Collect Accounting Statistics
      Combiner
      Configured MAC
      Containing Equipment Status
      Description
      Encapsulation Type
      Equipped
      Firmware Revision Status
      Hardware Class
      Hardware MAC
      Hold Time Down
      Hold Time Units
      Hold Time Up
      Holding IGH
      HSMDA Egress Scheduler Policy
      Interface ID
      L2 Profile
      L2Uplink
      Link Trap
      Link Up
      Load Balance Algorithm
      Manufacture Date
      Manufacturer
      Manufacturing Assembly No
      Manufacturing Deviations
      Manufacturing Variant
      Mode
      MTU
      Name
      Network Queue Policy Name
      Operational State
      Operational State
      Part Number
      Port Scheduler Policy
      Port Usage
      Previous State
      Queue 1
      Queue 2
      Queue 3
      Queue 4
      Queue 5
      Queue 6
      Queue 7
      Queue 8
      Serial Number
      Site ID
      Site Name
      Speed
      State
      Status
      Subrack Connection
      UNI Profile
      User label
    MC LAG Configuration parameters
      Administrative State
      Keep-Alive Interval
      Last Operational State Change
      Lost Connection Wait Interval
      Operational State
      Peer Address
      Peer Site Pointer
      Site Pointer
    MC LAG parameters
      Config Mismatch
      Config Mismatches
      Flush Ethernet Ring Enabled
      Is Active
      Is Advertised
      Is Using Extended TimeOut
      LACP Key
      lagInterfacePointer
      MAC LSB
      mcLagPointer
      Operational MAC LSB
      Peer Address
      Peer Site Pointer
      Remote LAG ID
      remoteLagInterfacePointer
      Selection Logic
      Site Pointer
      System ID
      System Priority
      Use LACP Key
    MC PSS LAG Group parameters
      Asymmetrical Config Detected
      Card Slot
      Card Slot
      Description
      firstMcLagMemberPointer
      LACP Key
      LAG
      LAG
      LAG ID
      LAG ID
      secondMcLagMemberPointer
      Source ID
      Source ID
      System ID
      System Priority
    MC Source parameters
      Service Site
      Shelf ID
      Site ID
      Site Name
      Slot ID
      Source ID
    MC Sync parameters
      Administrative State
      Diameter Proxy
      L2TP
      Last Sync Time
      Operational Flags
      Operational State
      Peer Address
      Peer Site Id
      Peer Site Pointer
      Site Id
      Site Pointer
      Status
      Synchronize IGMP
      Synchronize IGMP-Snooping
      Synchronize IPoE Subscriber Management
      Synchronize Local DHCP Server
      Synchronize MC IPsec
      Synchronize MC Ring
      Synchronize MLD
      Synchronize MLD Snooping
      Synchronize PPPoE Subscriber Management
      Synchronize Python
      Synchronize SRRP
      Synchronize Subscriber Host Tracking
    Media Adaptor parameters
      Acronym Code
      Administrative State
      Background Diagnostics Fault Reason
      Background Diagnostics State
      CLEI Code
      CLEI Code
      CLI Name
      Connector Code
      Connector Type
      Description
      Diagnostics Capable
      Factory ID
      Firmware Revision Status
      Hardware Class
      Interchangeability Marking
      Laser Tunability
      Laser Wavelength
      Link Length Support
      Link Length(m)
      Manufacture Date
      Manufacture Date (YYYY/MM/DD hh:mm:ss)
      Manufacturer
      Manufacturing Assembly No
      Manufacturing Deviations
      Manufacturing Variant
      Max Case Temp
      Model Name
      Model Number
      Module Present Type
      Module State
      Module Type
      Number of Lanes
      Operational State
      Optical Compliance
      Part Number
      Part Number
      RxDtv Dac Percent
      Serial Number
      Serial Number
      Site ID
      Site Name
      Software Part Number
      Supported Media
      Transceiver Type
      Tx Disable
      Vendor OUI
    MEG Service parameters
      ID-Permission
      MHF-Creation
      MIP LTR Priority
      Service ID
      VLAN ID
    Mep Alarm Category parameters
      Category
      Condition
      Default Severity
      MEP ID
      Override Severity
      RMD Device ID
    MEP parameters
      Administrative State
      AIS Enabled
      AIS Enabled
      AIS Frames Transmitted
      AIS Interface Support Enable
      AIS Interval
      AIS Last Interval Received
      AIS Last Interval Received
      AIS LowPriority Defect
      AIS Meg Level
      AIS Priority
      AIS Received (AisRx)
      AIS Received (AisRx)
      AIS Received (AisRx)
      Alarm Clearing Threshold
      Alarm Threshold
      CCM Enabled
      CCM Interval
      CCM OUT
      CCM Padding Packet Size (Bytes)
      CCM Sequence Errors
      CCM TLV Ignore
      Continuously Running Tests
      Control MEP
      Control Sap Tag
      Create Redundant MEP
      CSF Direction
      CSF Interval
      CSF Priority
      CSF Rx Count
      CSF Rx Frame State
      CSF Rx Interval
      CSF Rx Multiplier
      Daughter Card For Incoming LBM Without TLV
      Defect Flags
      Description
      Direction
      DMR Frames Transmitted
      Enable Client Signal Fault
      Enable LMM Session Stats Collection
      Enable Test
      Eth Test Enabled
      Eth Test Pattern
      Eth Test Threshold
      Ethernet Ring Path Endpoint
      Ethernet Tunnel Path Endpoint
      Facility Fault Notify
      Facility Type
      Facility VLAN ID
      Failed AIS Frame Transmits
      Fault Alarm Time
      Fault Propagation
      Fault Reset Time
      Generate AIS Frames
      High-Priority Defect
      ID
      Interface Type
      LAG
      Last Error CCM Failure Frame
      Last Xcon CCM Failure Frame
      LBR Frames Transmitted With TLV
      LBR Frames Transmitted Without TLV
      LMR Frames Transmitted
      Low-Priority Defect
      Mac Address
      MAC Address
      Maintenance Domain Level
      Maintenance Domain Name
      Maintenance Domain Name Type
      Maintenance Entity Group
      Maintenance Entity Group Name
      Maintenance Entity Group Name Type
      MC-LAG Inactive
      MEG Sub-Group
      MEP ID
      Network Interface
      One-way-delay Test Threshold
      Operational Mac Address
      Port
      Primary VLAN Enable
      Primary VLAN ID
      Priority Level for CCM
      Redundant MEP
      RMD
      Role
      SAP
      SDP Binding
      Service Site Pointer
      Site ID
      Type
      Use as Test Source
      Use as Test Target
    Meter parameters
      Admin CBS
      Admin CBS
      Admin CBS
      Admin MBS
      Admin MBS
      Admin MBS
      CBS Type
      CIR
      CIR Adaptation
      Color Mode
      DEFAULT
      DEFAULT
      DEFAULT
      DEFAULT
      DEFAULT
      DEFAULT
      ID
      MAX
      MAX
      MBS Type
      MultiPoint
      Oper CBS
      Oper CBS
      Oper CBS
      Oper MBS
      Oper MBS
      Oper MBS
      PIR
      PIR Adaptation
      Rate Mode
    MFibEntry parameters
      Forward or Block
      Group IP Address
      Group IP Address Type
      Group MAC Address
      Location
      SAP/SDP
      Src IP Address
      Src IP Address Type
      Type
    MIP parameters
      Associated SAP/SdpBinding
      Direction
      Mac Address
      Maintenance Domain ID
      Maintenance Domain Level
      Maintenance Domain Name
      Maintenance Domain Name Type
      Maintenance Entity Group ID
      Maintenance Entity Group Name
      Maintenance Entity Group Name Type
      MEP ID
      Operational Mac Address
      Primary VLAN ID
      Site ID
    Mirror Service parameters
      Administrative State
      Aggregated Service Site Operational State
      Automatic SDP Binding Creation
      Composite ID
      Composite Service
      Contains Dynamically Created Sites
      Customer
      Customer ID
      Customer Name
      Description
      Enable Application Performance Reporting
      Modified for Throughput Test
      Number Of IP Detail Addresses
      Number Of Sites
      Report Customer Name
      Service ID
      Service Name
      Service Priority
      Service Tier
      Service Type
      State Cause
      SVC Mgr Service ID
      Template
      Test Suite Count
      Transport Type
    Mirror Site parameters
      Account Session ID
      Account Session ID (Control)
      Administrative State
      Creation Mode
      Customer ID
      Customer Name
      Description
      Dynamic Service Policy
      Enable Port ID Mirroring
      Encapsulation Type
      Forwarding Class
      Monitor Access Interface Operational State
      Name
      Number of SAPs
      Operational State
      Profile
      Remote Source Capable
      Service ID
      Service Name
      Site Type
      Slice Size
      Source Administrative State
      Source Type
      State Cause
      SVC Mgr Service ID
      Switch Name
      System ID
    MPO Port Position Info parameters
      Connected Port Pointer
      Connected To/From
      Direction
      Port
      Port Pointer
      Position
    Multipoint Service Path parameters
      ID
      Service Component ID
      Service Path Mode
    Multipoint Transport Service parameters
      A to Z
      Administrative State
      Administrative State
      Aggregated Service Site Operational State
      APS Direction
      CE-VLANID
      CE-VLANID - AZ
      CE-VLANID - ZA
      Committed Burst Size - AZ (Kbytes)
      Committed Burst Size - ZA (Kbytes)
      Committed Info Rate - AZ (Mbps)
      Committed Info Rate - ZA (Mbps)
      Composite ID
      Composite Service
      Contains Dynamically Created Sites
      Customer
      Customer ID
      Customer Name
      Description
      Direction
      Enable Application Performance Reporting
      EndPoint A Name
      EndPoint Z Name
      Force Create OCh XC
      Inconsistency
      Inconsistent
      Is SubGige Full Rate Service
      Is SubGige Service QinQ
      Is SVLAN Push-Pop/Keep Capable QinQ Service
      Is Untagged Traffic Supported
      Link Group ID
      Managed
      Modified for Throughput Test
      Number Of IP Detail Addresses
      Number Of Sites
      Operational State
      Path Preference
      Path Search Option
      Peak Burst Size - AZ (Kbytes)
      Peak Burst Size - ZA (Kbytes)
      Peak Info Rate - AZ (Mbps)
      Peak Info Rate - ZA (Mbps)
      Plane Type
      Protection Level
      Protection Path Service
      Protection Type
      QinQ Service Stack-VLAN Tagging Configuration
      Rate
      Report Customer Name
      Revert Mode
      Service Deployment Mode
      Service ID
      Service Name
      Service Priority
      Service Tier
      Service Type
      Service Type
      Site A ID
      Site A Name
      Site Z ID
      Site Z Name
      Stack-VLANID - AZ
      Stack-VLANID - ZA
      State Cause
      SVC Mgr Service ID
      Template
      Test Suite Count
      Use Existing Unprotected Services
      Wave Key Assign Mode
      Working Path Service
      Z to A
    NE Ethernet CFM Configuration parameters
      Fault Management Mode
      Grace Period TX
      Grace Period TX Enabled
      MC LAG Prop Hold Time
      MC LAG Standby Inactive
      MEP ID
      Sender ID Name
      Sender ID Type
      SLM Inactivity Timer
    NE Maintenance Entity Group parameters
      Card Subtype
      Card/RMD
      CCM Interval
      CFM Hold Down Timer
      Enable Auto Remote MEP Discovery
      Facility ID-Permission
      Global MEG
      Maintenance Domain ID
      Maintenance Domain Level
      Maintenance Entity Group ID
      Maintenance Entity Group Name
      Maintenance Entity Group Name Type
      Number Of MEPs
      Service ID
      Site
      Test Suite Count
      Unicast Hub MEP
      VLAN ID
    NE Schedulable Test parameters
      Accounting Policy ID
      Administrative State
      Card TCA Profile
      Deployed Test
      Description
      Failures
      ID
      Name
      Owned By
      Owner
      Runs
      Suppress Accounting
      Test
      Test Mode
    NE Specifics parameters
      Aging Grace Period
      Aging Interval
      AINS Timer
      Allowed Logins After Password Expiration
      Altitude
      Altitude
      AUND Default Setting
      Compound Node Name
      Contact
      Default AINS State
      Default AINS State
      Default AINS Threshold
      Default AINS Threshold
      Dormant Account
      EC Programmed Capacity
      Enable NA Alarms
      Enable PM TCA Alerts
      Environmental Conditions Restricted
      Environmental Conditions Restricted
      Extended Temperature Range
      Feature IP Utilities restricted
      Feature Pause Flow Control
      File based PM Policy
      FIPS Squelch Mode
      HTTP Port
      Idle User Timeout
      Maximum Invalid Login Attempts
      Maximum Password Length
      Minimum Password Length
      Minimum Wait After Invalid Login
      MTC1T9 Programmed Capacity
      Network Element Description
      Network Element ID
      Network Element Mode
      Network Element Name
      Obsolescence Interval
      OCS IP
      ODUN Default Setting
      ODUN Default Setting
      ODUPTF Default Setting
      ODUPTF Default Setting
      OSPF Area Id(GCC/OSC Interfaces)
      OSPF Area Index(GCC/OSC Interfaces)
      OTU Default Setting
      OTU Default Setting
      Partner NE
      Partner NE
      Provision Mode
      Provision Mode
      Region
      Release Date
      Release Date
      SNMP Source
      Software Release
      Software Release
      STSN Default Setting
      Subnet Mask
      System Date Time during Last Resync
      System Restart Status
      System Restart Status
      Telnet Port
      Temperature Units
      Third Party Modules
      Third Party Modules
      TID
      TL1 Autonomous Messages Enabled
      UI Mode
      Wave Key Space
    NE TCA Profiles parameters
      Configuration Mode
      Description
      Discovery State
      Distribution Mode
      Last Sync From
      Last Sync Time
      Origin Site Name
      Policy Scope
      Site ID
      Site Name
      TCA Profile ID
      TCA Profile Type
    NE TCA Thresholds parameters
      TCA Profile ID
      TCA Profile Type
      TCA Variable Name
      Threshold Value
    NE Test Agent parameters