Show, Clear, Debug, and Tools Command Reference
This section provides an overview of the show, clear, debug and tools command reference.
Topics in this section include:
Command Hierarchies
 | Note:
For information on egress multicast group commands, refer to the Layer 2 Services Guide. |
Show Commands
show
— service
— id id base
— bgp
— sdp
— id sap base
— id service vpls-group
— id mac-notification
— id mrp
— id sap mrp
— id mvrp vlan
— id mvrp vlan detailed
— sap-using app-profile app-profile name
— sap-using encap-type encap-type
— oper-group group-name
— sdp sdp-id keep-alive-history
— sdp-group group-name
— service-using [epipe] [ies] [vpls] [vprn] [mirror] [b-vpls] [i-vpls] [m-vpls] [apipe] [fpipe] [ipipe] [sdp sdp-id] [customer customer-id]
— system
— template
— vpls-template template-name
— vpls-template-using template-name
— vpls-sap-template template-name
— vpls-sap-template-using template-name
— connection-profile-vlan [1...8000]
— eth-cfm
— association [ma-index] [detail]
— cfm-stack-table [port [port-id [vlan vlan-id]] | sdp sdp-id[:vc-id]][level 0..7] [direction up | down]
— cfm-stack-table port [{all-ports | all-sdps | all-virtuals}][level 0..7][direction up | down]
— cfm-stack-table port-id [vlan qtag[.qtag]] [level 0..7] [direction up | down]
— cfm-stack-table facility [{all-ports | all-lags | all-lag-ports | all-tunnel-meps | all-router-interfaces}] [level 0..7] [direction up | down]
— cfm-stack-table facility collect-lmm-stats
— domain [md-index] [association ma-index | all-associations] [detail]
— mip
— eth-ring [status]
— eth-ring [ring-index] hierarchy
— eth-ring ring-index [path {a | b}]
Command Descriptions
This section provides show command descriptions and output.
| Note:
For VLL and VPLS show, clear, and debug commands, refer to the Layer 2 Services Guide. For IES and VPRN show, clear, and debug commands, refer to the Layer 3 Services Guide. For PBB show, clear, and debug commands, refer to the IEEE 802.1ah PBB Guide. |
Service Commands
bgp-auto-rd
Syntax
bgp-auto-rd
Context
show>service>system
Description
This command displays service customer information.
Output
Sample Output
*A:Dut#show service system bgp-auto-rd
=======================================================================
Service BGP Auto Route Distinguisher Information
=======================================================================
IP address : 192.0.2.69
Comm Val Start : 1200 End : 1300
In Use : 1
=======================================================================
bgp-route-distinguisher
Syntax
bgp-route-distinguisher [vprn] [vpls] [epipe]
Context
show>service>system
Description
This command displays the bgp operational route-distinguishers used by all the bgp-enabled services in the system and if a given route-distinguisher. The information can be filtered by service: vprn, vpls or epipe.
Output
Sample Output
*A:Dut# show service system bgp-route-distinguisher
=======================================================================
Service Route Distinguishers
=======================================================================
Svc Id Type Oper Route-Distinguisher Route-Distinguisher
-----------------------------------------------------------------------
20 vprn 192.0.2.69:20 configured
10 vprn 192.0.2.69:10 configured
1200 vpls 192.0.2.69:1200 auto
-----------------------------------------------------------------------
Number of RD Entries: 3
=======================================================================
*A:Dut# show service system bgp-route-distinguisher vpls
=======================================================================
Service Route Distinguishers
=======================================================================
Svc Id Type Oper Route-Distinguisher Route-Distinguisher
-----------------------------------------------------------------------
1200 vpls 192.0.2.69:1200 auto
-----------------------------------------------------------------------
Number of RD Entries: 1
=======================================================================
customer
Syntax
customer [customer-id] [site customer-site-name]]
Context
show>service
Description
This command displays service customer information.
Parameters
customer-id—
Displays only information for the specified customer ID.
Values—
All customer IDs display.
Values—
1 — 2147483647
site customer-site-name—
Specifies the customer site which is an anchor point for an ingress and egress virtual scheduler hierarchy.
Output
Show Customer Command Output
Table 11 Service Commands Customer Field Descriptions describes the show customer command output fields:
Table 11: Service Commands Customer Field Descriptions
Label | Description |
Customer-ID | The ID that uniquely identifies a customer. |
Contact | The name of the primary contact person. |
Description | Generic information about the customer. |
Phone | The phone/pager number to reach the primary contact person. |
Total Customers | The total number of customers configured. |
Site | Multi-service site name. A multi-service customer site is a group of SAPs with common origination and termination points. |
Description | Displays information about a specific customer's multi-service site. |
Assignment | The port ID, MDA, or card number, where the SAP's that are members of this multi- service site are defined. |
I. Sched Pol | The ingress QoS scheduler policy assigned to this multi-service site. |
E. Sched Pol | The egress QoS scheduler policy assigned to this multi-service site. |
Service-ID | The ID that uniquely identifies a service. |
SAP | Specifies the SAP assigned to the service. |
Sample Output
*A:ALA-12# show service customer
==========================================================
Customers
==========================================================
Customer-ID : 1
Contact : Manager
Description : Default customer
Phone : (123) 555-1212
Customer-ID : 2
Contact : Tech Support
Description : TiMetra Networks
Phone : (234) 555-1212
Customer-ID : 3
Contact : Test
Description : TiMetra Networks
Phone : (345) 555-1212
Customer-ID : 6
Contact : Test1
Description : Epipe Customer
Phone : (456) 555-1212
Customer-ID : 7
Contact : Test2
Description : VPLS Customer
Phone : (567) 555-1212
Customer-ID : 8
Contact : Customer Service
Description : IES Customer
Phone : (678) 555-1212
Customer-ID : 274
Contact : TestA
Description : ABC Company
Phone : 650 123-4567
Customer-ID : 94043
Contact : Test Engineer on Duty
Description : TEST Customer
Phone : (789) 555-1212
------------------------------------------------------
Total Customers : 8
-----------------------------------------------------------
*A:ALA-12#
*A:ALA-12# show service customer 274
==============================================================================
Customer 274
==============================================================================
Customer-ID : 274
Contact : Mssrs. Beaucoup
Description : ABC Company
Phone : 650 123-4567
------------------------------------------------------------------------------
Multi Service Site
------------------------------------------------------------------------------
Site : west
Description : (Not Specified)
==============================================================================
*A:ALA-12#
*A:ALA-12# show service customer 274 site west
==============================================================================
Customer 274
==============================================================================
Customer-ID : 274
Contact : Mssrs. Beaucoup
Description : ABC Company
Phone : 650 123-4567
------------------------------------------------------------------------------
Multi Service Site
------------------------------------------------------------------------------
Site : west
Description : (Not Specified)
Assignment : Card 1
I. Sched Pol: SLA1
E. Sched Pol: (Not Specified)
------------------------------------------------------------------------------
Service Association
------------------------------------------------------------------------------
No Service Association Found.
==============================================================================
*A:ALA-12#
fdb-mac
Syntax
fdb-mac [ieee-address] [expiry]
Context
show>service
Description
This command displays the FDB entry for a given MAC address.
Parameters
ieee-address—
Specifies the 48-bit MAC address in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.
expiry—
shows amount of time until MAC is aged out.
Output
Sample Output
*A:ALA-48# show service fdb-mac
===============================================================================
Service Forwarding Database
===============================================================================
ServId MAC Source-Identifier Type/Age Last Change
-------------------------------------------------------------------------------
103 12:34:56:78:90:0f sap:1/1/7:0 Static 02/02/2009 09:27:57
700 90:30:ff:ff:ff:8f cpm Host 02/02/2009 09:27:57
-------------------------------------------------------------------------------
No. of Entries: 2
===============================================================================
*A:ALA-48#
*A:ALA-48# show service fdb-mac expiry
===============================================================================
Service Forwarding Database
===============================================================================
ServId MAC Source-Identifier Type/ Last Change
Expiry
-------------------------------------------------------------------------------
103 12:34:56:78:90:0f sap:1/1/7:0 Static 02/02/2009 09:27:57
700 90:30:ff:ff:ff:8f cpm Host 02/02/2009 09:27:57
-------------------------------------------------------------------------------
No. of Entries: 2
===============================================================================
*A:ALA-48#
isid-using
Syntax
isid-using [ISID]
Context
show>service
Description
This command displays 7750 SR and 7450 ESS services using ISID.
Parameters
ISID—
Displays the service using the specified I-component Service ID (ISID).
Values—
0 — 16777215
Output
Sample Output
*A:SetupCLI# show service isid-using
=================================================================
Services
=================================================================
SvcId ISID Type b-Vpls Adm Opr SvcMtu CustId
-----------------------------------------------------------------
2001 122 i-VPLS 2002 Up Down 1514 1
2005 2005 i-mVP* 2004 Down Down 1500 1
-----------------------------------------------------------------
Matching Services : 2
-----------------------------------------------------------------
*A:SetupCLI#
l2-route-table
Syntax
l2-route-table [detail] [bgp-ad] [multi-homing] [bgp-vpls] [bgp-vpws] [all-routes]
l2-route-table [msap]
l2-route-table [sap sap-id] [vlan-transaction | anti-spoof]
l2-route-table app-profile app-profile name
l2-route-table authentication-policy policy-name [msap]
l2-route-table encap-type encap-type
l2-route-table eth-tunnel [tunnel-id eth-tunnel-id]
l2-route-table ingress | egress atm-td-profile td-profile-id
l2-route-table ingress | egress filter filter-id
l2-route-table ingress | egress qos-polify qos-policy-id [msap]
l2-route-table interface ip-address | ip-int-name [msap]
l2-route-table mc-ring peer ip-address ring sync-tag
Context
show>service
Description
This command displays 7750 SR and 7450 ESS Layer 2 route table information.
Parameters
all-routes—
Displays active/inactive routes.
detail—
Displays detailed information.
sap-using
Syntax
sap-using [msap] [dyn-script] [description]
sap-using [sap sap-id] [vlan-translation | anti-spoof]
sap-using app-profile app-profile-name
sap-using authentication-policy policy-name [msap]
sap-using encap-type encap-type
sap-using eth-cfm collect-lmm-stats [sap sap-id]
sap-using eth-ring [ring-id eth-ring-id]
sap-using eth-tunnel [tunnel-id eth-tunnel-id]
sap-using ingress | egress atm-td-profile td-profile-id
sap-using ingress | egress filter filter-id
sap-using ingress | egress qos-policy qos-policy-id [msap]
sap-using interface ip-address | ip-int-name [msap]
sap-using mc-ring peer ip-address ring sync-tag
Context
show>service
Description
This command displays 7750 SR and 7450 ESS SAP information.
Output
Sample Output
show service sap-using eth-tunnel [tunnel-id ##]
*A:Dut-C># show service sap-using eth-tunnel
===============================================================================
Service Access Points (Ethernet Tunnel)
===============================================================================
SapId SvcId Path Port Tag
-------------------------------------------------------------------------------
eth-tunnel-1 50 1 1/1/2 4030
2 3/1/3 4031
eth-tunnel-2 51 1 3/1/1 100
2 3/1/3 4032
eth-tunnel-67 52 2 3/1/3 672
8 1/1/2 678
eth-tunnel-1:3 3133 1 1/1/2 4
2 3/1/3 4
eth-tunnel-2:3 3233 1 3/1/1 7
2 3/1/3 7
eth-tunnel-65:4094 4094 2 - 4094.*
3 2/1/4 4094.*
8 1/1/3 4094.*
16 2/1/3 4094.*
eth-tunnel-1024:4094 4094 1 2/1/1 -
2 3/1/2 -
eth-tunnel-1:4 5154 1 1/1/2 5
2 3/1/3 5
eth-tunnel-2:4 5254 1 3/1/1 8
2 3/1/3 8
eth-tunnel-1:5 6165 1 1/1/2 6
2 3/1/3 6
eth-tunnel-2:5 6265 1 3/1/1 9
2 3/1/3 9
eth-tunnel-65:3 36533 3 2/1/4 65.10
8 1/1/3 65.10
16 2/1/3 65.10
eth-tunnel-66:3 36633 2 2/1/4 66.13
4 1/1/3 66.13
eth-tunnel-67:3 36733 2 3/1/3 16
8 1/1/2 16
eth-tunnel-68:3 36833 2 3/1/3 19
3 3/1/1 19
eth-tunnel-65:4 56554 3 2/1/4 65.11
8 1/1/3 65.11
16 2/1/3 65.11
eth-tunnel-66:4 56654 2 2/1/4 66.14
4 1/1/3 66.14
eth-tunnel-67:4 56754 2 3/1/3 17
8 1/1/2 17
eth-tunnel-68:4 56854 2 3/1/3 20
3 3/1/1 20
eth-tunnel-65:5 66565 3 2/1/4 65.12
8 1/1/3 65.12
16 2/1/3 65.12
eth-tunnel-66:5 66665 2 2/1/4 66.15
4 1/1/3 66.15
eth-tunnel-67:5 66765 2 3/1/3 18
8 1/1/2 18
eth-tunnel-68:5 66865 2 3/1/3 21
3 3/1/1 21
-------------------------------------------------------------------------------
Number of SAPs : 23
This command can also be used to identify SAPs with the “EthTunTagMismatch” flag and can be used to prevent the flag from occurring before activating paths through the following CLI example:
*A:Dut-C> show service sap-using eth-tunnel | match "-"
-------------------------------------------------------------------------------
eth-tunnel-1 50 1 1/1/2 4030
eth-tunnel-2 51 1 3/1/1 100
eth-tunnel-67 52 2 3/1/3 672
eth-tunnel-1:3 3133 1 1/1/2 4
eth-tunnel-2:3 3233 1 3/1/1 7
eth-tunnel-65:4094 4094 2 - 4094.*
eth-tunnel-1024:4094 4094 1 2/1/1 -
2 3/1/2 -
...
eth-tunnel-65:3 36533 3 2/1/4 65.10
eth-tunnel-66:3 36633 2 2/1/4 66.13
...
SAP eth-tunnel-1024:4094 does not have the eth-tunnel tags configured for the corresponding paths which causes the SAP to be oper down. Ethernet tunnel 65 does not have path 2 configured. However, SAP eth-tunnel-65:4094 has a tag configured for path 2. This is acceptable and allows the operator to pre-provision tags under the same-fate SAPs before the corresponding path is configured under the Ethernet tunnel. This is the recommended configuration order so that there is no traffic disruption on the same-fate SAPs.
SAP eth-tunnel-65:5 has tags configured for paths 3, 8 and 16 and is operationally up.
If path 2 of Ethernet tunnel 65 was properly configured and active, SAP eth-tunnel-65:5 would be operationally down since it does not have a corresponding tag for path 2.
Any other tunnel is fine because it has no dash present in the port or tag location.
The show eth-tunnel status command summarizes the MEP status in one screen and also identifies the ports and tags associated in summary format for all loadsharing tunnels (similar to show eth-tunnel aps for g8031-1to1 mode).
show service sap-using eth-cfm squelch-ingress-levels [sap sap-id]
<sap-id> : null - <port-id|lag-id>
dot1q - <port-id|lag-id>:[qtag1|cp-conn-prof-id]
qinq - <port-id|lag-id>:[qtag1|cp-conn-prof-
id].[qtag2|
cp-conn-prof-id]
cp - keyword
conn-prof-id - [1..8000]
port-id - slot/mda/port[.channel]
eth-sat-id esat-id/slot/port
esat: keyword
id: 1 to 20
pxc-id pxc-id.sub-port
pxc pxc-id.sub-port
pxc: keyword
id: 1 to 64
sub-port: a, b
eth-tunnel - eth-tunnel-<id>[:<eth-tun-sap-id>]
id - [1..128]
eth-tun-sap-id - [0..4094]
lag-id - lag-<id>
lag - keyword
id - [1..200]
qtag1 - [0..4094]
qtag2 - [*|null|0..4094]
show service sap-using squelch-ingress-levels
===============================================================================
ETH-CFM Squelching
===============================================================================
SapId SvcId Squelch Level
-------------------------------------------------------------------------------
6/1/1:100.* 1 0 1 2 3 4 5 6 7
lag-1:100.* 1 0 1 2 3 4
6/1/1:200.* 2 0 1 2
lag-1:200.* 2 0 1 2 3 4 5
-------------------------------------------------------------------------------
Number of SAPs: 4
-------------------------------------------------------------------------------
===============================================================================
show service sdp-using eth-cfm squelch-ingress-levels [<sdp-id[:vc-id]>]
<sdp-id[:vc-id]> : sdp-id - [1..17407]
vc-id - [1..4294967295]
show service sdp-using squelch-ingress-levels
================================================================================
ETH-CFM Squelching
================================================================================
SdpId SvcId Type Far End Squelch Level
-------------------------------------------------------------------------------
12345:4000000000 2147483650 Spok 1.1.1.1 0 1 2 3 4 5 6 7
===============================================================================
show service sap-using eth-cfm collect-lmm-stats
=========================================================
ETH-CFM SAPs Configured to Collect LMM Statistics
=========================================================
SapId SvcId
---------------------------------------------------------
1/1/10:1000.* 1000
---------------------------------------------------------
No. of SAPs: 1
=========================================================
oper-group
Syntax
oper-group [group-name]
oper-group [group-name] detail
oper-group [group-name] members [sap] [sdp] [site]
oper-group [group-name] monitoring [sap] [sdp] [site] [mvrp]
Context
show>service
Description
This command displays the 7750 SR and 7450 ESS oper-group information, member count, monitor-client count, and status in a single line for each of the configured oper-groups.
Parameters
group-name—
Displays oper-group information.
detail—
Displays detailed information for each of the configured oper-groups.
members—
Displays the members of the specified oper-group, or all oper-groups. A filter can be applied on the output to display only required member type, by specifying an optional parameter.
Values—
sap, sdp, site
monitoring—
displays the clients that are monitoring the specified oper-group, or all oper-groups. A filter can be applied on the output to display only required client type, by specifying an optional parameter.
Values—
sap, sdp, site, mvrp
Output
Sample Output
*A:Dut-B# show service oper-group
===============================================================================
Service Oper Group Information
===============================================================================
Name Oper Creation Hold Hold Members Monitor
Status Origin UpTime DnTime
(secs) (secs)
-------------------------------------------------------------------------------
og-test up manual 4 0 4 4
-------------------------------------------------------------------------------
Entries found: 1
=====================================================================
*A:Dut-B#
*A:Dut-B# show service oper-group detail
=====================================================================
Service Oper Group Information
=====================================================================
Oper Group : og-test
Creation Origin : manual Oper Status : up
Hold DownTime : 0 secs Hold UpTime : 4 secs
Members : 4 Monitoring : 4
=====================================================================
===================================================================
Member SDP-Binds for OperGroup: og-test
===================================================================
SdpId SvcId Type IP address Adm Opr
-------------------------------------------------------------------
201:1 1 Spok 10.20.1.1 Up Up
201:2 1 Spok 10.20.1.1 Up Up
-------------------------------------------------------------------
SDP Entries found: 4
===================================================================
===================================================================
Monitoring SDP-Binds for OperGroup: og-test
===================================================================
SdpId SvcId Type IP address Adm Opr
-------------------------------------------------------------------
205:1 1 Spok 10.20.1.5 Up Up
205:2 1 Spok 10.20.1.5 Up Up
-------------------------------------------------------------------
SDP Entries found: 4
===================================================================
*A:Dut-B#
pw-routing
Syntax
pw-routing {local-prefix | static-route | paths | all}
pw-routing route-table [all-routes]
pw-routing route-table summary
Context
show>service
Description
This command displays PW routing information at this node.
Parameters
local-prefix | static-route | paths | all—
Shows details of the T-PE prefixes configured on this node, static routes from this node, explicit PW paths configured on this node, or all of these.
route-table [all-routes]—
Displays the PW routing table on this node. If all-routes is specified, then the full routing table is displayed.
route-table summary—
Displays a summary of the PW routing table for this node.
Output
Sample Output
*A:Dut-C# show service pw-routing local-prefix
===============================================================================
Service PW Routing Information
===============================================================================
===============================================================================
Service PW Routing Local-Prefix RD Information
===============================================================================
Local-Prefix Route-Dist Community Adv-Bgp
-------------------------------------------------------------------------------
3:10.20.1.3 100:3 100:3 enabled
100:4 100:4 enabled
-------------------------------------------------------------------------------
Local-Prefix Entries found: 1
===============================================================================
===============================================================================
*A:Dut-C# show service pw-routing static-route
===============================================================================
Service PW Routing Information
===============================================================================
=========================================================
Service PW Routing Static-Route Information
=========================================================
Prefix Next-Hop
---------------------------------------------------------
6:10.20.1.6/64 10.20.1.5
---------------------------------------------------------
Static Route Entries found: 1
=========================================================
===============================================================================
*A:Dut-C# show service pw-routing paths
===============================================================================
Service PW Routing Information
===============================================================================
=============================================================
Service PW Routing Path Information
=============================================================
Path Adm Hop IP Address
-------------------------------------------------------------
path1_to_F up 1 10.20.1.5
2 10.20.1.2
path1_to_F2 up 1 10.20.1.2
2 10.20.1.5
-------------------------------------------------------------
Path Entries found: 2
=============================================================
===============================================================================
*A:Dut-C# show service pw-routing all
===============================================================================
Service PW Routing Information
===============================================================================
SPE-Address : 3:10.20.1.3
Boot Timer : 10 secs
Boot Timer Remain : 0 secs
Retry Timer : 30 secs
Retry Count : 30
===============================================================================
Service PW Routing Local-Prefix RD Information
===============================================================================
Local-Prefix Route-Dist Community Adv-Bgp
-------------------------------------------------------------------------------
3:10.20.1.3 100:3 100:3 enabled
100:4 100:4 enabled
-------------------------------------------------------------------------------
Local-Prefix Entries found: 1
===============================================================================
=========================================================
Service PW Routing Static-Route Information
=========================================================
Prefix Next-Hop
---------------------------------------------------------
6:10.20.1.6/64 10.20.1.5
---------------------------------------------------------
Static Route Entries found: 1
=========================================================
=============================================================
Service PW Routing Path Information
=============================================================
Path Adm Hop IP Address
-------------------------------------------------------------
path1_to_F up 1 10.20.1.5
2 10.20.1.2
path1_to_F2 up 1 10.20.1.2
2 10.20.1.5
-------------------------------------------------------------
Path Entries found: 2
=============================================================
===============================================================================
*A:Dut-C# show service pw-routing route-table all-routes
===============================================================================
Service PW L2 Routing Information
===============================================================================
AII-Type2/Prefix-Len Next-Hop Owner Age
Route-Distinguisher Community Best
-------------------------------------------------------------------------------
3:10.20.1.3:0/64 10.20.1.3 local 00h32m08s
0:0 0:0 yes
3:10.20.1.3:1/96 10.20.1.3 host 00h32m08s
0:0 0:0 yes
3:10.20.1.3:2/96 10.20.1.3 host 00h32m08s
0:0 0:0 yes
3:10.20.1.3:3/96 10.20.1.3 host 00h32m08s
0:0 0:0 yes
3:10.20.1.3:4/96 10.20.1.3 host 00h32m08s
0:0 0:0 yes
3:10.20.1.3:5/96 10.20.1.3 host 00h32m08s
0:0 0:0 yes
3:10.20.1.3:6/96 10.20.1.3 host 00h32m08s
0:0 0:0 yes
3:10.20.1.3:7/96 10.20.1.3 host 00h32m08s
0:0 0:0 yes
3:10.20.1.3:8/96 10.20.1.3 host 00h32m08s
0:0 0:0 yes
3:10.20.1.3:9/96 10.20.1.3 host 00h32m08s
0:0 0:0 yes
3:10.20.1.3:10/96 10.20.1.3 host 00h32m07s
0:0 0:0 yes
6:10.20.1.6:0/64 10.20.1.5 static 00h07m33s
0:0 0:0 yes
6:10.20.1.6:0/64 10.20.1.5 bgp 00h31m34s
100:6 100:6 no
-------------------------------------------------------------------------------
Entries found: 13
===============================================================================
*A:Dut-C# show service pw-routing route-table summary
========================================
Service PW L2 Routing Summary
========================================
Source Active
----------------------------------------
BGP 1
Static 1
Host 10
Local 3
----------------------------------------
Total 15
========================================
pw-sap-using
Syntax
pw-sap-using
Context
show>service
Description
Output
Sample Output
===============================================================================
Service Access Points
===============================================================================
PortId SvcId Ing. Ing. Egr. Egr. Adm Opr
QoS Fltr QoS Fltr
-------------------------------------------------------------------------------
pw-1:0 1 1 none 1 none Up Up
pw-1:1 1 1 none 1 none Up Up
pw-2:2.1 2 1 none 1 none Up Up
pw-2:0.* 2 1 none 1 none Up Up
pw-2:1.* 2 1 none 1 none Up Up
pw-3:3 3 1 none 1 none Up Up
pw-4:4.* 4 1 none 1 none Up Up
-------------------------------------------------------------------------------
Number of SAPs : 7
-------------------------------------------------------------------------------
===============================================================================
pw-template
Syntax
pw-template
Context
show>service
Description
Output
Sample Output
*A:Dut-B# show service pw-template 1
=======================================================================
PW Template Information
=======================================================================
PW Tmpl Id : 1
Use Provisioned Sdp : enabled VcType : vlan
Acctg Policy : default Collect Stats : disabled
Mac-Learning : enabled Mac-Ageing : enabled
Discard Unkn Src : disabled Limit MacMove : blockable
Mac-Pinning : disabled Vlan VcTag : 4095
MAC Address Limit : no limit Rest Prot Src Mac: disabled
Auto Learn Mac Prot : disabled RestProtSrcMacAct: disable
Block On Peer Fault : disabled
SHG
Name :
Description : (Not Specified)
Rest Prot Src Mac : disabled Rest Unprot Dst : disabled
Auto Learn Mac Prot : disabled RestProtSrcMacAct: disable
Egress
Mac FilterId : none Ip FilterId : none
Ipv6 FilterId : none QoS NetPlcyId : none
Port RedirectQGrp : none Instance Id : none
Ingress
Mac FilterId : none Ip FilterId : none
Ipv6 FilterId : none QoS NetPlcyId : none
Fp RedirectQGrp : none Instance Id : none
IGMP
Fast Leave : disabled Import Plcy : none
Last Memb Intvl : 10 deci-secs Max Nbr Grps : 0
Send Queries : disabled
Version : 3
Force VlanVc Fwd : disabled Control Word : disabled
Hash Label : disabled Hash Lbl Sig Cap : disabled
Last Changed : 02/12/2013 22:11:49
-----------------------------------------------------------------------
Included SDP-Groups
-----------------------------------------------------------------------
red
-----------------------------------------------------------------------
saii-type2-using
Syntax
saii-type2-using global-id[:prefix[:ac-id]]
Context
show>service
Description
Displays the SDP used by a spoke-sdp-fec with a specified FEC129 Type 2 SAII.
Parameters
global-id[:prefix[:ac-id]]—
Specifies the switch-point information using SAII-Type2.
Values—
<global-id[:prefix*> : <global-id>[:<prefix>[:<ac-id>]]
global-id | 1..4294967295 |
prefix | a.b.c.d | 1..4294967295 |
ac-id | 1..4294967295 |
Output
Sample Output
*A:Dut-E# show service saii-type2-using 3:10.20.1.3:1
===================================================================
Service Switch-Point Information
===================================================================
SvcId Oper-SdpBind SAII-Type2
-------------------------------------------------------------------
2147483598 17407:4294967195 3:10.20.1.3:1
-------------------------------------------------------------------
Entries found: 1
===================================================================
sdp
Syntax
sdp sdp-id pw-port [pw-port-id]
sdp [consistent | inconsistent | na] egressifs
sdp sdp-id keep-alive-history
sdp far-end ip-address keep-alive-history
sdp [sdp-id] [detail]
sdp far-end ip-address [detail]
Context
show>service
Description
This command displays SDP information.
If no optional parameters are specified, a summary SDP output for all SDPs is displayed.
Parameters
sdp-id—
The SDP ID for which to display information.
Values—
All SDPs.
Values—
1 — 17407
far-end ip-address—
Displays only SDPs matching with the specified far-end IP address.
Values—
SDPs with any far-end IP address.
detail—
Displays detailed SDP information.
Values—
SDP summary output.
keep-alive-history—
Displays the last fifty SDP keepalive events for the SDP.
Values—
SDP summary output.
pw-port pw-port-id—
Displays the SAP identifier for PW-SAPs.
Output
Show Service SDP
Table 12 describes the show service SDP output fields.
Table 12: Service Commands SDP Field Descriptions
Label | Description |
SDP Id | The SDP identifier. |
Description | Displays a text string describing the SDP. |
Admin Path MTU | Displays the desired largest service frame size (in octets) that can be transmitted through this SDP to the far-end ESR, without requiring the packet to be fragmented. The default value of zero indicates that the path MTU should be computed dynamically from the corresponding MTU of the tunnel. |
Opr Path MTU | Displays the actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end ESR, without requiring the packet to be fragmented. In order to be able to bind this SDP to a given service, the value of this object minus the control word size (if applicable) must be equal to or larger than the MTU of the service, as defined by its service MTU. |
Far End | Displays the far end IP address. |
Delivery | The type of delivery used by the SDP: GRE or MPLS. |
IP address | Specifies the IP address of the remote end of the GRE or MPLS tunnel defined by this SDP. |
Adm Admin State | The desired state of the SDP. |
Opr Oper State | The operating state of the SDP. |
Flags | Specifies all the conditions that affect the operating status of this SDP. |
Signal Signaling | The signaling protocol used to obtain the ingress and egress labels used in frames transmitted and received on the SDP. |
Last Status Change | The time of the most recent operating status change to this SDP. |
Adv. NTU Over | Specifies whether the advertised MTU of a VLL spoke SDP bind includes the 14-byte L2 header, so that it is backward compatible with pre-2.0 software. |
Last Mgmt Change | The time of the most recent management-initiated change to this SDP. |
KeepAlive Information | This section displays Keepalive information. |
Hello Time | Specifies how often the SDP echo request messages are transmitted on this SDP. |
Hello Msg Len | The length of the SDP echo request messages transmitted on this SDP. |
Hello Timeout | The number of seconds to wait for an SDP echo response message before declaring a timeout. |
Unmatched Replies | The number of SDP unmatched message replies timer expired. |
Max Drop Count | The maximum number of consecutive SDP echo request messages that can be unacknowledged before the keepalive protocol reports a fault. |
Hold Down Time | The amount of time to wait before the keepalive operating status is eligible to enter the alive state. |
TX Hello Msgs | The number of SDP echo request messages transmitted since the keepalive was administratively enabled or the counter was cleared. |
Rx Hello Msgs | The number of SDP echo request messages received since the keepalive was administratively enabled or the counter was cleared. |
Associated LSP List | When the SDP type is MPLS, a list of LSPs used to reach the far-end router displays. All the LSPs in the list must terminate at the IP address specified in the far end field. If the SDP type is GRE, the following message displays: SDP Delivery Mechanism is not MPLS |
Lsp Name | Displays the LSP name. |
Time Since Last Transaction | Displays the time of the last transaction. |
Signaling | Specifies the signaling type. |
Collect Stats | Specifies whether the agent collects accounting statistics for this SDP. When the value is true the agent collects accounting statistics on this SDP. |
VLAN VC Etype | Displays the VLAN VC type. |
BW Booking Factor | Specifies the value used to calculate the max SDP available bandwidth. The value specifies the percentage of the SDP max available bandwidth for VLL call admission. When the value of is set to zero (0), no new VLL spoke-sdp bindings with non-zero bandwidth are permitted with this SDP. Overbooking, >100% is allowed. |
PBB Etype | Displays the Ethertype used in frames sent out on this SDP when specfied as vlan for Provider Backbone Bridging frames. |
Oper Max BW (Kbps) | Indicates the operational bandwidth in kilo-bits per seconds (Kbps) available for this SDP. The value is determined by the sum of the bandwidth of all the RSVP LSPs used by the SDP. |
Avail BW (Kbps) | Indicates the bandwidth that is still free for booking by the SDP bindings on the SDP. |
Net-Domain | Specifies the network-domain name configured on this SDP. The default value of this object is the default network-domain. |
Egr Interface | Indicates whether all the egress network interfaces that can carry traffic on this SDP are associated with the network-domain configured on this SDP. not applicable indicates that there is no egress network interface that can carry traffic on this SDP. consistent Indicates that the network-domains for all the egress network interfaces that can carry traffic on this SDP are consistent. inconsistent indicates that the network-domain for one or more egress network interfaces that can carry traffic on this SDP are inconsistent. |
Revert Time | Specifies the time to wait before reverting back from LDP to the configured LSPs, after having failed over to LDP. |
Revert Count Down | Indicates the timer countdown before reverting back from LDP on this SDP. The timer countdown begins after the first configured LSP becomes active. |
Flags | Displays all the conditions that affect the operating status of this SDP. |
Class Forwarding | Indicates the admin state of class-based forwarding on this SDP. When the value is true, class-based forwarding is enabled. |
EnforceDSTELspFc | Specifies whether service manager must validate with RSVP the support of the FC by the LSP. |
Default LSP | Specifies the LSP ID that is used as a default when class-based forwarding is enabled on this SDP. This object must be set when enabling class-based forwarding. |
Multicast LSP | Displays the LSP ID that all multicast traffic will be forwarded on when class-based forwarding is enabled on this SDP. When this object has its default value, multicast traffic will be forwarded on an LSP according to its forwarding class mapping. |
Number of SDPs | Displays the metric to be used within the Tunnel Table Manager for decision making purposes. When multiple SDPs going to the same destination exist, this value is used as a tie-breaker by Tunnel Table Manager users like MP-BGP to select route with lower value. |
Sample Output
*A:Dut-D# show service id 1 sdp 17407:4294967294 detail
=======================================================================
Service Destination Point (Sdp Id : 17407:4294967294) Details
=======================================================================
-------------------------------------------------------------------------------
Sdp Id 17407:4294967294 -(not applicable)
-----------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 17407:4294967294 Type : VplsPmsi
Split Horiz Grp : (Not Specified)
VC Type : Ether VC Tag : n/a
Admin Path MTU : 9194 Oper Path MTU : 9194
Delivery : MPLS
Far End : not applicable
Tunnel Far End : n/a LSP Types : None
Hash Label : Disabled Hash Lbl Sig Cap : Disabled
Oper Hash Label : Disabled
Admin State : Up Oper State : Up
Acct. Pol : None Collect Stats : Disabled
Ingress Label : 0 Egress Label : 3
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
Admin ControlWord : Not Preferred Oper ControlWord : False
Last Status Change : 12/14/2012 12:42:22 Signaling : None
Last Mgmt Change : 12/14/2012 12:42:19 Force Vlan-Vc : Disabled
Endpoint : N/A Precedence : 4
PW Status Sig : Enabled
Class Fwding State : Down
Flags : None
Time to RetryReset : never Retries Left : 3
Mac Move : Blockable Blockable Level : Tertiary
Local Pw Bits : None
Peer Pw Bits : None
Peer Fault Ip : None
Peer Vccv CV Bits : None
Peer Vccv CC Bits : None
Application Profile: None
Max Nbr of MAC Addr: No Limit Total MAC Addr : 0
Learned MAC Addr : 0 Static MAC Addr : 0
MAC Learning : Enabled Discard Unkwn Srce: Disabled
MAC Aging : Enabled
BPDU Translation : Disabled
L2PT Termination : Disabled
MAC Pinning : Disabled
Ignore Standby Sig : False Block On Mesh Fail: False
Oper Group : (none) Monitor Oper Grp : (none)
Rest Prot Src Mac : Disabled
Auto Learn Mac Prot: Disabled RestProtSrcMacAct : Disable
Ingress Qos Policy : (none) Egress Qos Policy : (none)
Ingress FP QGrp : (none) Egress Port QGrp : (none)
Ing FP QGrp Inst : (none) Egr Port QGrp Inst: (none)
-----------------------------------------------------------------------
ETH-CFM SDP-Bind specifics
-----------------------------------------------------------------------
V-MEP Filtering : Disabled
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Max Drop Count : 3 Hold Down Time : 10
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
I. Fwd. Octs. : 0 I. Dro. Octs. : 0
E. Fwd. Pkts. : 2979761 E. Fwd. Octets : 476761760
-----------------------------------------------------------------------
Control Channel Status
-----------------------------------------------------------------------
PW Status : disabled Refresh Timer : <none>
Peer Status Expire : false Clear On Timeout : true
MCAC Policy Name :
MCAC Max Unconst BW: no limit MCAC Max Mand BW : no limit
MCAC In use Mand BW: 0 MCAC Avail Mand BW: unlimited
MCAC In use Opnl BW: 0 MCAC Avail Opnl BW: unlimited
-----------------------------------------------------------------------
RSVP/Static LSPs
-----------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
-----------------------------------------------------------------------
Class-based forwarding :
-----------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
=======================================================================
FC Mapping Table
=======================================================================
FC Name LSP Name
-----------------------------------------------------------------------
No FC Mappings
-----------------------------------------------------------------------
Stp Service Destination Point specifics
-----------------------------------------------------------------------
Stp Admin State : Down Stp Oper State : Down
Core Connectivity : Down
Port Role : N/A Port State : Forwarding
Port Number : 0 Port Priority : 128
Port Path Cost : 10 Auto Edge : Enabled
Admin Edge : Disabled Oper Edge : N/A
Link Type : Pt-pt BPDU Encap : Dot1d
Root Guard : Disabled Active Protocol : N/A
Last BPDU from : N/A
Designated Bridge : N/A Designated Port Id: N/A
Fwd Transitions : 0 Bad BPDUs rcvd : 0
Cfg BPDUs rcvd : 0 Cfg BPDUs tx : 0
TCN BPDUs rcvd : 0 TCN BPDUs tx : 0
TC bit BPDUs rcvd : 0 TC bit BPDUs tx : 0
RST BPDUs rcvd : 0 RST BPDUs tx : 0
-----------------------------------------------------------------------
Number of SDPs : 1
-----------------------------------------------------------------------
=======================================================================
*A:Dut-B# show service sdp 204 detail
=======================================================================
Service Destination Point (Sdp Id : 204) Details
=======================================================================
-----------------------------------------------------------------------
Sdp Id 204 -10.20.1.4
-----------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 204 SDP Source : manual
Admin Path MTU : 0 Oper Path MTU : 1492
Delivery : MPLS
Far End : 10.20.1.4
Tunnel Far End : n/a LSP Types : RSVP
Admin State : Up Oper State : Up
Signaling : TLDP Metric : 0
Acct. Pol : None Collect Stats : Disabled
Last Status Change : 02/12/2013 22:10:43 Adv. MTU Over. : No
Last Mgmt Change : 02/12/2013 22:09:55 VLAN VC Etype : 0x8100
Bw BookingFactor : 100 PBB Etype : 0x88e7
Oper Max BW(Kbps) : 0 Avail BW(Kbps) : 0
Net-Domain : default Egr Interfaces : Consistent
Flags : None
Mixed LSP Mode Information :
Mixed LSP Mode : Disabled Active LSP Type : RSVP
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
-----------------------------------------------------------------------
SDP-Groups
-----------------------------------------------------------------------
red
-----------------------------------------------------------------------
-----------------------------------------------------------------------
RSVP/Static LSPs
-----------------------------------------------------------------------
Associated LSP List :
Lsp Name : lsp-b2d
Admin State : Up Oper State : Up
Time Since Last Tran*: 00h17m33s
-----------------------------------------------------------------------
Class-based forwarding :
-----------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
=======================================================================
FC Mapping Table
=======================================================================
FC Name LSP Name
-----------------------------------------------------------------------
No FC Mappings
=======================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-B#
*A:Dut-B# show service sdp
============================================================================
Services: Service Destination Points
============================================================================
SdpId AdmMTU OprMTU Far End Adm Opr Del LSP Sig
----------------------------------------------------------------------------
230 0 1582 10.20.1.3 Up Up MPLS I TLDP
----------------------------------------------------------------------------
Number of SDPs : 1
----------------------------------------------------------------------------
Legend: R = RSVP, L = LDP, B = BGP, M = MPLS-TP, n/a = Not Applicable
============================================================================
*A:Dut-B#
*A:Dut-B# show service sdp detail
===============================================================================
Services: Service Destination Points Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 230 -10.20.1.3
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 230 SDP Source : manual
Admin Path MTU : 0 Oper Path MTU : 1582
Delivery : MPLS
Far End : 10.20.1.3
Tunnel Far End : n/a LSP Types : SR-ISIS
Admin State : Up Oper State : Up
Signaling : TLDP Metric : 0
Acct. Pol : None Collect Stats : Disabled
Last Status Change : 01/28/2015 22:00:07 Adv. MTU Over. : No
Last Mgmt Change : 01/28/2015 21:59:53 VLAN VC Etype : 0x8100
Bw BookingFactor : 100 PBB Etype : 0x88e7
Oper Max BW(Kbps) : 0 Avail BW(Kbps) : 0
Net-Domain : default Egr Interfaces : Consistent
Flags : None
Mixed LSP Mode Information :
Mixed LSP Mode : Disabled Active LSP Type : SR-ISIS
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
Src B-MAC LSB : <none> Ctrl PW VC ID : <none>
Ctrl PW Active : n/a
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
===============================================================================
FC Mapping Table
===============================================================================
FC Name LSP Name
-------------------------------------------------------------------------------
No FC Mappings
-------------------------------------------------------------------------------
Segment Routing
-------------------------------------------------------------------------------
ISIS : enabled LSP Id : 524289
Oper Instance Id : 0
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-B#
*A:Dut-B> show service sdp
============================================================================
Services: Service Destination Points
============================================================================
SdpId AdmMTU OprMTU Far End Adm Opr Del LSP Sig
----------------------------------------------------------------------------
230 0 1582 10.20.1.3 Up Up MPLS O TLDP
----------------------------------------------------------------------------
Number of SDPs : 1
----------------------------------------------------------------------------
Legend: R = RSVP, L = LDP, B = BGP, M = MPLS-TP, n/a = Not Applicable
I = SR-ISIS, O = SR-OSPF
============================================================================
*A:Dut-B> show service sdp 230 detail
===============================================================================
Service Destination Point (Sdp Id : 230) Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 230 -10.20.1.3
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 230 SDP Source : manual
Admin Path MTU : 0 Oper Path MTU : 1582
Delivery : MPLS
Far End : 10.20.1.3
Tunnel Far End : n/a LSP Types : SR-OSPF
Admin State : Up Oper State : Up
Signaling : TLDP Metric : 0
Acct. Pol : None Collect Stats : Disabled
Last Status Change : 05/27/2015 03:08:37 Adv. MTU Over. : No
Last Mgmt Change : 05/27/2015 03:05:36 VLAN VC Etype : 0x8100
Bw BookingFactor : 100 PBB Etype : 0x88e7
Oper Max BW(Kbps) : 0 Avail BW(Kbps) : 0
Net-Domain : default Egr Interfaces : Consistent
Flags : None
Mixed LSP Mode Information :
Mixed LSP Mode : Disabled Active LSP Type : SR-OSPF
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
Src B-MAC LSB : <none> Ctrl PW VC ID : <none>
Ctrl PW Active : n/a
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
===============================================================================
FC Mapping Table
===============================================================================
FC Name LSP Name
-------------------------------------------------------------------------------
No FC Mappings
-------------------------------------------------------------------------------
Segment Routing
-------------------------------------------------------------------------------
OSPF : enabled LSP Id : 524289
Oper Instance Id : 0
===============================================================================
*A:Dut-B>config>service>sdp#
*A:ALA-12# show service sdp 8
==============================================================================
Service Destination Point (Sdp Id : 8)
==============================================================================
SdpId Adm MTU Opr MTU IP address Adm Opr Deliver Signal
------------------------------------------------------------------------------
8 4462 4462 10.10.10.104 Up Dn NotReady MPLS TLDP
==============================================================================
*A:ALA-12#
*A:ALA-12#
===============================================================================
Service Destination Point (Sdp Id : 8) Details
===============================================================================
Sdp Id 8 -(10.10.10.104)
-------------------------------------------------------------------------------
Description : MPLS-10.10.10.104
SDP Id : 8
Admin Path MTU : 0 Oper Path MTU : 0
Far End : 10.10.10.104 Delivery : MPLS
Admin State : Up Oper State : Down
Flags : SignalingSessDown TransportTunnDown
Signaling : TLDP VLAN VC Etype : 0x8100
Last Status Change : 02/01/2007 09:11:39 Adv. MTU Over. : No
Last Mgmt Change : 02/01/2007 09:11:46
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
Associated LSP LIST :
Lsp Name : to-104
Admin State : Up Oper State : Down
Time Since Last Tran*: 01d07h36m
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:ALA-12#
*A:MV-SR12> show service sdp 10 detail
===============================================================================
Service Destination Point (Sdp Id : 10) Details
===============================================================================
Sdp Id 10 -(200.20.1.201)
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 10 SDP Source : manual
Admin Path MTU : 0 Oper Path MTU : 9182
Far End : 200.20.1.201 Delivery : MPLS/LDP
Admin State : Up Oper State : Up
Signaling : TLDP Metric : 0
Acct. Pol : None Collect Stats : Disabled
Last Status Change : 02/12/2010 22:37:08 Adv. MTU Over. : No
Last Mgmt Change : 02/12/2010 22:37:03 VLAN VC Etype : 0x8100
Bw BookingFactor : 100 PBB Etype : 0x88e7
Oper Max BW(Kbps) : 0 Avail BW(Kbps) : 0
Net-Domain : default Egr Interfaces : Consistent
Mixed LSP Mode : Enabled
Revert Time : 0 Revert Count Down : n/a
Flags : None
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
-------------------------------------------------------------------------------
LDP Information :
-------------------------------------------------------------------------------
LDP LSP Id : 65539 LDP Active : No
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP LIST :
Lsp Name : To_7710
Admin State : Up Oper State : Up
Time Since Last Tran*: 01h20m56s
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
===============================================================================
FC Mapping Table
===============================================================================
FC Name LSP Name
-------------------------------------------------------------------------------
No FC Mappings
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:MV-SR12>config>service>vprn#
When network domains are configured, the SDP egress interface state can be verified by using the following command:
*A:Dut-T# show service sdp egressifs
===============================================================================
SDP Egress Ifs State Table
===============================================================================
SDP Id Network Domain State
-------------------------------------------------------------------------------
100 net1 consistent
-------------------------------------------------------------------------------
SDPs : 1
===============================================================================
*A:Dut-Tr#
*A:Dut-C># show service sdp 1 pw-port
============================================================================
Service Destination Point (Sdp Id 1 Pw-Port )
=============================================================================
SDP Binding port : 1/1/3
SDP: 1 Pw-port: 11
----------------------------------------------------------------------------
VC-Id : 11 Admin Status : up
Encap : dot1q Oper Status : up
VC Type : vlan Vlan VC Tag : 0
Oper Flags : (Not Specified)
SDP: 1 Pw-port: 44
-------------------------------------------------------------------------------
VC-Id : 2 Admin Status : up
Encap : dot1q Oper Status : up
VC Type : ether
Oper Flags : (Not Specified)
----------------------------------------------------------------------------
Entries found: 2
-----------------------------------------------------------------------------
*A:Dut-C> #
*A:Dut-C> # show service sdp 1 pw-port 44
============================================================================
Service Destination Point (Sdp Id 1 Pw-Port 44)
============================================================================
SDP Binding port : 1/1/3
VC-Id : 2 Admin Status : up
Encap : dot1q Oper Status : up
VC Type : ether
Oper Flags : (Not Specified)
============================================================================
*A:Dut-C> #
The following show output gives the source-bmac-lsb and control PW used for a given SDP.
A:bksim1613# show service sdp 1 detail
===============================================================================
Service Destination Point (Sdp Id : 1) Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 1 -2.2.2.2
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 1 SDP Source : manual
Admin Path MTU : 0 Oper Path MTU : 1556
Delivery : MPLS
Far End : 2.2.2.2
Tunnel Far End : n/a LSP Types : RSVP
Admin State : Up Oper State : Up
Signaling : TLDP Metric : 0
Acct. Pol : None Collect Stats : Disabled
Last Status Change : 08/12/2013 06:33:57 Adv. MTU Over. : No
Last Mgmt Change : 08/12/2013 06:32:47 VLAN VC Etype : 0x8100
Bw BookingFactor : 100 PBB Etype : 0x88e7
Oper Max BW(Kbps) : 0 Avail BW(Kbps) : 0
Net-Domain : default Egr Interfaces : Consistent
Flags : None
Mixed LSP Mode Information :
Mixed LSP Mode : Disabled Active LSP Type : RSVP
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 3 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
Src B-MAC LSB : 00-13 Ctrl PW VC ID : 550
The following show output indicates whether use-sdp-bmac is applied to a given PW.
A:bksim1613# show service id 550 sdp 1:550 detail
===============================================================================
Service Destination Point (Sdp Id : 1:550) Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 1:550 -(2.2.2.2)
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 1:550 Type : Spoke
Spoke Descr : (Not Specified)
VC Type : Ether VC Tag : n/a
Admin Path MTU : 0 Oper Path MTU : 1556
Delivery : MPLS
Far End : 2.2.2.2
Tunnel Far End : n/a LSP Types : RSVP
Hash Label : Disabled Hash Lbl Sig Cap : Disabled
Oper Hash Label : Disabled
Admin State : Up Oper State : Up
Acct. Pol : None Collect Stats : Disabled
Ingress Label : 131048 Egress Label : 131063
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
Admin ControlWord : Not Preferred Oper ControlWord : False
Admin BW(Kbps) : 0 Oper BW(Kbps) : 0
Last Status Change : 08/12/2013 06:33:57 Signaling : TLDP
Last Mgmt Change : 08/12/2013 06:32:47 Force Vlan-Vc : Disabled
Endpoint : N/A Precedence : 4
PW Status Sig : Enabled
Class Fwding State : Down
Flags : None
Local Pw Bits : None
Peer Pw Bits : None
Peer Fault Ip : None
Peer Vccv CV Bits : lspPing
Peer Vccv CC Bits : mplsRouterAlertLabel
Application Profile: None
Transit Policy : None
Standby Sig Slave : False
Block On Peer Fault: False
Use sdp B-MAC : True
Ingress Qos Policy : (none) Egress Qos Policy : (none)
Ingress FP QGrp : (none) Egress Port QGrp : (none)
Ing FP QGrp Inst : (none) Egr Port QGrp Inst: (none)
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Max Drop Count : 3 Hold Down Time : 10
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
I. Fwd. Octs. : 0 I. Dro. Octs. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
-------------------------------------------------------------------------------
Control Channel Status
-------------------------------------------------------------------------------
PW Status : disabled Refresh Timer : <none>
Peer Status Expire : false
Request Timer : <none>
Acknowledgement : false
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
Lsp Name : to-bksim1611-1
Admin State : Up Oper State : Up
Time Since Last Tr*: 05h44m54s
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
===============================================================================
FC Mapping Table
===============================================================================
FC Name LSP Name
-------------------------------------------------------------------------------
No FC Mappings
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
===============================================================================
* indicates that the corresponding row element may have been truncated.
sdp-group
Syntax
sdp-group group-name
Context
show>service
Description
This show command will display the SDPs and the PW templates that are associated with the group-name.
Output
Sample Output
*A:Dut-B# show service sdp-group
==================================================
SDP Group Information
==================================================
Group Value
--------------------------------------------------
red 1
blue 2
--------------------------------------------------
Entries found: 2
==================================================
*A:Dut-B#
*A:Dut-B# show service sdp-group "red"
=======================================================================
SDP-Group Information
=======================================================================
Name : red Value : 1
Associated SDPs
=======================================================================
SdpId : 204 Sdp-Group : red
SdpId : 205 Sdp-Group : red
-----------------------------------------------------------------------
Number of Entries: 2
=======================================================================
Associated pw-template included
=======================================================================
Pw-Template : 1 Sdp-Group : red
-----------------------------------------------------------------------
Number of Entries: 1
=======================================================================
Associated pw-template excluded
=======================================================================
No Entries found
=======================================================================
*A:Dut-B#
sdp-group-using
Syntax
sdp-group-using
Context
show>service
Description
This command displays groups using SDP.
Output
Sample Output
*A:Dut-D# show service sdp-group-using
=======================================================================
SDP-Group Information
=======================================================================
SdpId : 402 Sdp-Group : red
SdpId : 405 Sdp-Group : red
SdpId : 4021 Sdp-Group : blue
SdpId : 4051 Sdp-Group : blue
Associated pw-template included
=======================================================================
Pw-Template : 1 Sdp-Group : red
Pw-Template : 2 Sdp-Group : blue
Associated pw-template excluded
=======================================================================
No Entries found
=======================================================================
*A:Dut-D#
sdp-using
Syntax
sdp-using [sdp-id[:vc-id] | far-end ip-address]
sdp-using sdp-id[:vc-id] eth-cfm collect-lmm-stats
Context
show>service
Description
This command displays services using SDP or far-end address options.
Parameters
sdp-id—
Displays only services bound to the specified SDP ID.
Values—
1 — 17407
vc-id—
The virtual circuit identifier.
Values—
1 — 4294967295
far-end ip-address—
Displays only services matching with the specified far-end IP address.
Values—
Services with any far-end IP address.
eth-cfm collect-lmm-stats—
Displays the LMM statistics for the specified MPLS SDP binding
Output
Show Service SDP Using X
Table 13 describes show service sdp-using output fields.
Table 13: Service Commands SDP-Using Field Descriptions
Label | Description |
Svc ID | The service identifier. |
Sdp ID | The SDP identifier. |
Type | Type of SDP: spoke or mesh. |
Far End | The far end address of the SDP. |
Oper State | The operational state of the service. |
Ingress Label | The label used by the far-end device to send packets to this device in this service by this SDP. |
Egress Label | The label used by this device to send packets to the far-end device in this service by this SDP. |
Sample Output
*A:ALA-1# show service sdp-using 300
===============================================================================
Service Destination Point (Sdp Id : 300)
===============================================================================
SvcId SdpId Type Far End Opr State I.Label E.Label
-------------------------------------------------------------------------------
1 300:1 Mesh 10.0.0.13 Up 131071 131071
2 300:2 Spok 10.0.0.13 Up 131070 131070
100 300:100 Mesh 10.0.0.13 Up 131069 131069
101 300:101 Mesh 10.0.0.13 Up 131068 131068
-------------------------------------------------------------------------------
Number of SDPs : 4
===============================================================================
*A:ALA-1#
show service sap-using eth-cfm squelch-ingress-levels [sap <sap-id>]
<sap-id> : null - <port-id|lag-id>
dot1q - <port-id|lag-id>:[qtag1|cp-conn-prof-id]
qinq - <port-id|lag-id>:[qtag1|cp-conn-prof-id].[qtag2|
cp-conn-prof-id]
cp - keyword
conn-prof-id - [1..8000]
port-id - slot/mda/port[.channel]
eth-sat-id esat-id/slot/port
esat: keyword
id: 1 to 20
pxc-id pxc-id.sub-port
pxc pxc-id.sub-port
pxc: keyword
id: 1 to 64
sub-port: a, b
eth-tunnel - eth-tunnel-<id>[:<eth-tun-sap-id>]
id - [1..128]
eth-tun-sap-id - [0..4094]
lag-id - lag-<id>
lag - keyword
id - [1..200]
qtag1 - [0..4094]
qtag2 - [*|null|0..4094]
show service sap-using squelch-ingress-levels
===============================================================================
ETH-CFM Squelching
===============================================================================
SapId SvcId Squelch Level
-------------------------------------------------------------------------------
6/1/1:100.* 1 0 1 2 3 4 5 6 7
lag-1:100.* 1 0 1 2 3 4
6/1/1:200.* 2 0 1 2
lag-1:200.* 2 0 1 2 3 4 5
-------------------------------------------------------------------------------
Number of SAPs: 4
-------------------------------------------------------------------------------
===============================================================================
show service sdp-using eth-cfm squelch-ingress-levels [<sdp-id[:vc-id]>]
<sdp-id[:vc-id]> : sdp-id - [1..17407]
vc-id - [1..4294967295]
show service sdp-using squelch-ingress-levels
================================================================================
ETH-CFM Squelching
================================================================================
SdpId SvcId Type Far End Squelch Level
-------------------------------------------------------------------------------
12345:4000000000 2147483650 Spok 1.1.1.1 0 1 2 3 4 5 6 7
===============================================================================
show service sdp-using eth-cfm collect-lmm-stats
===============================================================================
ETH-CFM SDPs Configured to Collect LMM Statistics
===============================================================================
SdpId SvcId Type Far End
-------------------------------------------------------------------------------
1:1000 1000 spoke 1.1.1.31
-------------------------------------------------------------------------------
No. of SDPs: 1
===============================================================================
service-using
Syntax
service-using [epipe] [ies] [vpls] [vprn] [mirror] [b-vpls] [i-vpls] [m-vpls] [apipe] [fpipe] [ipipe] [sdp sdp-id] [customer customer-id]
Context
show>service
Description
This command displays the services matching certain usage properties. If no optional parameters are specified, all services defined on the system are displayed.
Parameters
epipe—
Displays matching Epipe services.
vpls—
Displays matching VPLS instances.
The following parameters are applicable to the 7750 SR and 7450 ESS:
ies—
Displays matching IES instances.
i-vpls—
Displays matching I-VPLS instances.
b-vpls—
Displays matching B-VPLS instances.
m-vpls—
Displays matching M-VPLS instances.
mirror —
Displays matching mirror services.
ipipe —
Displays matching Ipipe services.
The following parameters are applicable to the 7750 SR:
apipe—
Displays matching Apipe services.
fpipe—
Displays matching Fpipe services.
vprn —
Displays matching VPRN services.
sdp sdp-id—
Displays only services bound to the specified SDP ID.
Values—
Services bound to any SDP ID.
Values—
1 — 17407
customer customer-id—
Displays services only associated with the specified customer ID.
Values—
Services associated with a customer.
Values—
1 — 2147483647
Output
Show Service Service-Using
Table 14 describes the show command output fields.
Table 14: Service Commands Service-Using Field Descriptions
Label | Description |
Service Id | The service identifier. |
Type | Specifies the service type configured for the service ID. |
Adm | The desired state of the service. |
Opr | The operating state of the service. |
CustomerID | The ID of the customer who owns this service. |
Last Mgmt Change | The date and time of the most recent management-initiated change to this service. |
Sample Output
*A:ALA-12# show service service-using customer 10
==============================================================================
Services
==============================================================================
ServiceId Type Adm Opr CustomerId Last Mgmt Change
------------------------------------------------------------------------------
1 VPLS Up Up 10 09/05/2006 13:24:15
100 IES Up Up 10 09/05/2006 13:24:15
300 Epipe Up Up 10 09/05/2006 13:24:15
------------------------------------------------------------------------------
Matching Services : 3
==============================================================================
*A:ALA-12#
*A:ALA-12# show service service-using epipe
===============================================================================
Services [epipe]
===============================================================================
ServiceId Type Adm Opr CustomerId Last Mgmt Change
-------------------------------------------------------------------------------
6 Epipe Up Up 6 09/22/2006 23:05:58
7 Epipe Up Up 6 09/22/2006 23:05:58
8 Epipe Up Up 3 09/22/2006 23:05:58
103 Epipe Up Up 6 09/22/2006 23:05:58
-------------------------------------------------------------------------------
Matching Services : 4
===============================================================================
*A:ALA-12#
*A:ALA-14# show service service-using
===============================================================================
Services
===============================================================================
ServiceId Type Adm Opr CustomerId Last Mgmt Change
-------------------------------------------------------------------------------
10 mVPLS Down Down 1 10/26/2006 15:44:57
11 mVPLS Down Down 1 10/26/2006 15:44:57
100 mVPLS Up Up 1 10/26/2006 15:44:57
101 mVPLS Up Up 1 10/26/2006 15:44:57
102 mVPLS Up Up 1 10/26/2006 15:44:57
-------------------------------------------------------------------------------
Matching Services : 5
-------------------------------------------------------------------------------
*A:ALA-14#
The following output is applicable to the 7750 SR and 7450 ESS:
*A:SetupCLI# show service service-using
- service-using [epipe] [ies] [vpls] [mirror] [ipipe] [b-vpls] [i-vpls]
[m-vpls] [sdp <sdp-id>] [customer <customer-id>]
<epipe> : keyword - displays epipe services
<ies> : keyword - displays ies services
<vpls> : keyword - displays vpls services
<mirror> : keyword - displays mirror services
<ipipe> : keyword - displays ipipe services
<sdp-id> : [1..17407] - display services using this sdp
<customer-id> : [1..2147483647] - display services using this customer
<b-vpls> : keyword - displays b-vpls services
<i-vpls> : keyword - displays i-vpls services
<m-vpls> : keyword - displays m-vpls services
*A:SetupCLI# show service service-using
===========================================================================
Services
===========================================================================
ServiceId Type Adm Opr CustomerId Last Mgmt Change
-------------------------------------------------------------------------------
23 mVPLS Up Down 2 09/25/2007 21:45:58
100 Epipe Up Down 2 09/25/2007 21:45:58
101 Epipe Up Down 2 09/25/2007 21:45:58
102 Epipe Up Down 2 09/25/2007 21:45:58
105 Epipe Up Down 2 09/25/2007 21:45:58
110 Epipe Up Down 1 09/25/2007 21:45:58
990 IES Up Down 1 09/25/2007 21:45:58
1000 Mirror Up Down 1 09/25/2007 21:45:59
1001 Epipe Up Down 1 09/25/2007 21:45:58
1002 Epipe Up Down 1 09/25/2007 21:45:58
1003 Epipe Up Down 1 09/25/2007 21:45:58
1004 Epipe Up Down 1 09/25/2007 21:45:58
2000 Mirror Up Down 1 09/25/2007 21:45:59
2001 i-VPLS Up Down 1 09/25/2007 21:45:59
2002 b-VPLS Up Down 1 09/25/2007 21:45:59
2003 i-VPLS Down Down 1 09/25/2007 21:45:59
2004 b-mVPLS Down Down 1 09/25/2007 21:45:59
2005 i-mVPLS Down Down 1 09/25/2007 21:45:59
8787 IES Up Down 2 09/25/2007 21:45:58
8888 IES Up Down 1 09/25/2007 21:45:58
10000 IES Down Down 1 09/25/2007 21:45:59
10001 VPLS Up Down 1 09/25/2007 21:45:58
483000 Ipipe Down Down 2 09/25/2007 21:45:59
483001 Ipipe Up Down 2 09/25/2007 21:45:59
483004 Ipipe Down Down 2 09/25/2007 21:45:59
483007 VPLS Down Down 2 09/25/2007 21:45:59
483010 Ipipe Down Down 1 09/25/2007 21:45:59
-------------------------------------------------------------------------------
Matching Services : 27
-------------------------------------------------------------------------------
*A:ALA-14#
taii-type2-using
Syntax
taii-type2-using global-id[:prefix[:ac-id]]
Context
show>service
Description
Displays switch-point information using TAII.
Parameters
global-id[:prefix[:ac-id]]—
Specifies the switch-point information using SAII-Type2.
Values—
<global-id[:prefix*> : <global-id>[:<prefix>[:<ac-id>]] | |
global-id | 1..4294967295 |
prefix | a.b.c.d | 1..4294967295 |
ac-id | 1..4294967295 |
Output
Sample Output
*A:Dut-E# show service taii-type2-using 6:10.20.1.6:1
===================================================================
Service Switch-Point Information
===================================================================
SvcId Oper-SdpBind TAII-Type2
-------------------------------------------------------------------
2147483598 17407:4294967195 6:10.20.1.6:1
-------------------------------------------------------------------
Entries found: 1
=====================================================
vpls-template
Syntax
vpls-template
vpls-template template-name
Context
show>service>template>vpls-template
Description
This command displays basic information/summary, template name, etc. for all VPLS templates. When a template name is specified, detailed information for the specified template, VPLS parameters, etc. are displayed.
Output
Sample Output
A:Dut-C# show service template vpls-template
===============================================================================
Service template
===============================================================================
Template Services Last Update
-------------------------------------------------------------------------------
test 0 07/26/2010 08:40:01
svctemplate 10 07/26/2010 08:39:51
-------------------------------------------------------------------------------
Entries found: 2
===============================================================================
A:Dut-C# show service template vpls-template "svctemplate"
===============================================================================
Service template Information
===============================================================================
Template : svctemplate
MTU Size : 1514 Customer : 10
MAC Aging : enabled MAC Learning : enabled
Discard Unkn Dest : disabled Temp Flood Time : Disabled
Per Svc Hashing : disabled
FDB
Local Age Time : 300 secs Remote Age Time : 900 secs
High Watermark : 95% Low Watermark : 90%
Table Size : 250
STP
Admin State : disabled Priority : 32768
Bridge Max Age : 20 secs Bridge Hello Time: 2 secs
Bridge Fwd Delay : 15 secs Mode : rstp
Hold Cnt : 6
MAC Move
Rate : 2/sec Retry Timeout : 10 secs
Admin State : disabled Num Retries : 3
Pri-Ports Cumu Factor: 3 Sec Cumu Factor : 2
=================================================================================
vpls-template-using
Syntax
vpls-template-using template-name
Context
show>service>template
Description
This command displays services instantiated using the VPLS-template.
Output
Sample Output
A:Dut-C# show service template vpls-template-using "svctemplate"
===========================================================================
Service template 'svctemplate' created Services
===========================================================================
SvcId Creator Svc Vpls Group
---------------------------------------------------------------------------
1-10 5000 1
---------------------------------------------------------------------------
Entries found: 10
===========================================================================
vpls-sap-template
Syntax
vpls-sap-template
vpls-sap-template template-name
Context
show>service>template
Description
This command displays basic information/summary, template name, etc. for all SAP VPLS-templates.
Output
Sample Output
A:Dut-C# show service template vpls-sap-template squelch
===============================================================================
SAP template
===============================================================================
Template Saps Last Update
-------------------------------------------------------------------------------
saptemplate 30 07/26/2010 08:39:51
-------------------------------------------------------------------------------
Entries found: 1
===============================================================================
===============================================================================
SAP Template Information
===============================================================================
Template : saptemplate Discard Unkn Src : disabled
MAC Aging : enabled MAC Learning : enabled
BPDU Translation : disabled MAC Address Limit: no limit
L2pt Termination : disabled
STP
Admin Status : up Port Priority : 128
Port Path Cost : 10 Admin Edge : disabled
Link Type : Pt-pt
Auto Edge : enabled Root Guard : disabled
MAC Move
Limit : blockable Limit Level : tertiary
Ingress
QoS Policy : 1 MAC Fltr : n/a
IP Fltr : n/a QoS Sched Pol : n/a
Match QinQ Dot1p Bits: default Shared Q Pol : n/a
IPv6 Fltr : n/a
Use Multi-Pt Shared : disabled Agg Rate Limit : Max
Policer Pol : n/a
Egress
QoS Policy : 1 MAC Fltr : n/a
IP Fltr : n/a QoS Sched Pol : n/a
IPv6 Fltr : n/a QinQ Mark Top : disabled
Agg Rate Limit : Max Policer Pol : n/a
Frame Based Acctg : disabled
CPM Prot Plcy : def CPM Monitor MAC : disabled
Coll Acctg Stats : disabled
ETH-CFM MIP : disabled
ETH-CFM Squelch Level: 0 1 2 3 4 5
===============================================================================
vpls-sap-template-using
Syntax
vpls-sap-template-using template-name
Context
show>service>template
Description
This command displays services instantiated using vpls-sap-template.
Output
Sample Output
A:Dut-C# show service template vpls-sap-template-using "saptemplate"
===============================================================================
SAP template 'saptemplate' created SAPs
===============================================================================
SvcId Sap Creator Svc Vpls Group
-------------------------------------------------------------------------------
1-10 2/1/2:1-2/1/2:10 5000 1
2/2/8:1-2/2/8:10
lag-1:1.*-lag-1:10.*
-------------------------------------------------------------------------------
Entries found: 30
===============================================================================
id
Syntax
id id base
id sap base
id service vpls-group
id service vpls-group vpls-group-id non-template-saps
id mrp
id sap mrp
id mac-notification
id mvrp vlan
id mvrp vlan detailed
Context
show>service
Description
This command displays vpls-template information used to instantiate this service and m-vpls that controls this service.
Output
Sample Output
*A:mlstp-dutA# show service id 1 all
===============================================================================
Service Detailed Information
===============================================================================
Service Id : 1 Vpn Id : 0
Service Type : Epipe
Name : (Not Specified)
Description : (Not Specified)
Customer Id : 1 Creation Origin : manual
Last Status Change: 12/03/2012 15:26:20
Last Mgmt Change : 12/03/2012 15:24:57
Admin State : Up Oper State : Up
MTU : 1514
Vc Switching : False
SAP Count : 1 SDP Bind Count : 1
Per Svc Hashing : Disabled
Force QTag Fwd : Disabled
-------------------------------------------------------------------------------
ETH-CFM service specifics
-------------------------------------------------------------------------------
Tunnel Faults : ignore
-------------------------------------------------------------------------------
Service Destination Points(SDPs)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Sdp Id 32:1 -(0.0.3.234:42)
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 32:1 Type : Spoke
Spoke Descr : (Not Specified)
VC Type : Ether VC Tag : n/a
Admin Path MTU : 0 Oper Path MTU : 9186
Delivery : MPLS
Far End : 0.0.3.234:42
Tunnel Far End : n/a LSP Types : MPLSTP
Hash Label : Disabled Hash Lbl Sig Cap : Disabled
Oper Hash Label : Disabled
Admin State : Up Oper State : Up
Acct. Pol : None Collect Stats : Disabled
Ingress Label : 16416 Egress Label : 16416
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
Admin ControlWord : Preferred Oper ControlWord : True
Admin BW(Kbps) : 0 Oper BW(Kbps) : 0
Last Status Change : 12/03/2012 15:26:20 Signaling : None
Last Mgmt Change : 12/03/2012 15:24:57 Force Vlan-Vc : Disabled
Endpoint : N/A Precedence : 4
PW Status Sig : Enabled
Class Fwding State : Down
Flags : None
Local Pw Bits : None
Peer Pw Bits : None
Peer Fault Ip : None
Peer Vccv CV Bits : None
Peer Vccv CC Bits : None
Application Profile: None
Standby Sig Slave : False
Block On Peer Fault: False
Ingress Qos Policy : (none) Egress Qos Policy : (none)
Ingress FP QGrp : (none) Egress Port QGrp : (none)
Ing FP QGrp Inst : (none) Egr Port QGrp Inst: (none)
Statistics :
I. Fwd. Pkts. : 272969957 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 273017433 E. Fwd. Octets : 16381033352
-------------------------------------------------------------------------------
Control Channel Status
-------------------------------------------------------------------------------
PW Status : enabled Refresh Timer : 66 secs
Peer Status Expire : false Clear On Timeout : true
-------------------------------------------------------------------------------
SDP-BIND PW Path Information
-------------------------------------------------------------------------------
AGI : 1:1
SAII Type2 : 42:0.0.3.234:1
TAII Type2 : 42:0.0.3.233:1
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
Lsp Name : lsp-32
Admin State : Up Oper State : Up
*A:mlstp-dutA# show service id [1..4] all|match "Control Channel" pre-lines 1 post-
lines 5
-------------------------------------------------------------------------------
Control Channel Status
-------------------------------------------------------------------------------
PW Status : enabled Refresh Timer : 66 secs
Peer Status Expire : false Clear On Timeout : true
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Control Channel Status
-------------------------------------------------------------------------------
PW Status : enabled Refresh Timer : 66 secs
Peer Status Expire : false Clear On Timeout : true
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Control Channel Status
-------------------------------------------------------------------------------
PW Status : enabled Refresh Timer : 66 secs
Peer Status Expire : false Clear On Timeout : true
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Control Channel Status
-------------------------------------------------------------------------------
PW Status : enabled Refresh Timer : 66 secs
Peer Status Expire : false Clear On Timeout : true
-------------------------------------------------------------------------------
*A:mlstp-dutA# show service id [1..4] all | match SDP-BIND pre-lines 1 post-lines 5
-------------------------------------------------------------------------------
SDP-BIND PW Path Information
-------------------------------------------------------------------------------
AGI : 1:1
SAII Type2 : 42:0.0.3.234:1
TAII Type2 : 42:0.0.3.233:1
-------------------------------------------------------------------------------
SDP-BIND PW Path Information
-------------------------------------------------------------------------------
AGI : 1:2
SAII Type2 : 42:0.0.3.234:2
TAII Type2 : 42:0.0.3.233:2
-------------------------------------------------------------------------------
SDP-BIND PW Path Information
-------------------------------------------------------------------------------
AGI : 1:3
SAII Type2 : 42:0.0.3.234:3
TAII Type2 : 42:0.0.3.233:3
-------------------------------------------------------------------------------
SDP-BIND PW Path Information
-------------------------------------------------------------------------------
AGI : 1:4
SAII Type2 : 42:0.0.3.234:4
TAII Type2 : 42:0.0.3.233:4
A:Dut-C# show service id 1 mac-notification
===============================================================================
Service MAC-Notification Information
===============================================================================
Service Id : 1 MAC-Notification : Disabled
MAC-Notif Count : 3 (default) MAC-Notif Interval: 1 (default)
MAC-Notif Renotify: disabled (default)
===============================================================================
*A:Dut-C#
A:Dut-C# show service id 1 base
===============================================================================
Service Basic Information
===============================================================================
Service Id : 1 Vpn Id : 0
Service Type : uVPLS
Name : VPLS-5000-VLAN-1
Description : MVRP Ctrld Svc 1 created by Ctrl Svc 5000
Customer Id : 10
Last Status Change: 07/26/2010 08:39:51
Last Mgmt Change : 07/26/2010 08:39:51
Admin State : Up Oper State : Up
MTU : 1514 Def. Mesh VC Id : 1
SAP Count : 4 SDP Bind Count : 0
Snd Flush on Fail : Disabled Host Conn Verify : Disabled
Propagate MacFlush: Disabled Per Svc Hashing : Disabled
Allow IP Intf Bind: Disabled
Def. Gateway IP : None
Def. Gateway MAC : None
Temp Flood Time : Disabled Temp Flood : Inactive
Temp Flood Chg Cnt: 0
Template Used : svctemplate
Controlling Svc : 5000
-------------------------------------------------------------------------------
Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier Type AdmMTU OprMTU Adm Opr
-------------------------------------------------------------------------------
sap:2/1/1:1 q-tag 1518 1518 Up Up
sap:{2/1/2:1} q-tag 1518 1518 Up Prun
sap:{2/2/8:1} q-tag 1518 1518 Up Up
sap:{lag-1:1.*} qinq 1522 1522 Up Up
-------------------------------------------------------------------------------
Number of instantiated SAPs : 3 indicated by {<sap-id>}
===============================================================================
A:Dut-C# show service id 1 sap 2/1/2:1 base
A:Dut-C#
===============================================================================
Service Access Points(SAP)
===============================================================================
Service Id : 1
SAP : 2/1/2:1 Encap : q-tag
Description : MVRP Ctrld Sap 2/1/2:1 created by Ctrl Svc 5000
Admin State : Up Oper State : Up
Flags : None
Multi Svc Site : None
Last Status Change : 07/26/2010 08:28:24
Last Mgmt Change : 07/26/2010 08:39:51
Sub Type : regular
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
Split Horizon Group: (Not Specified)
Managed by Service : 5000 Managed by MSTI : CIST
Managed by Sap : 2/1/2:0 Prune State : Pruned
Max Nbr of MAC Addr: No Limit Total MAC Addr : 0
Learned MAC Addr : 0 Static MAC Addr : 0
Admin MTU : 1518 Oper MTU : 1518
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
qinq-pbit-marking : both
Ing Agg Rate Limit : max Egr Agg Rate Limit: max
Q Frame-Based Acct : Disabled
ARP Reply Agent : Disabled Host Conn Verify : Disabled
Mac Learning : Enabled Discard Unkwn Srce: Disabled
Mac Aging : Enabled Mac Pinning : Disabled
BPDU Translation : Disabled
L2PT Termination : Disabled
Vlan-translation : None
Acct. Pol : None Collect Stats : Disabled
Anti Spoofing : None Avl Static Hosts : 0
Tot Static Hosts : 0
Calling-Station-Id : n/a
Application Profile: None
Template Used : saptemplate
Restr MacProt Src : Disabled Restr MacUnpr Dst : Disabled
Time to RetryReset : never Retries Left : 3
Mac Move : Blockable Blockable Level : Tertiary
Egr MCast Grp :
Auth Policy : none
==============================================================================
A:Dut-C#
A:Dut-C# show service id 5000 vpls-group
===============================================================================
Service VPLS Group Information
===============================================================================
Service : 5000 VPLS Group : 1
-------------------------------------------------------------------------------
Admin Status : enabled Oper Status : up
Svc Start : 1 Svc End : 10
Svc Template : svctemplate Sap Template : saptemplate
Vlan Start : 1 Control : MVRP
Last Error : (Not Specified)
-------------------------------------------------------------------------------
===============================================================================
A:Dut-C#
A:Dut-C# show service id 5000 vpls-group 1 non-template-saps
==============================================
NON-TEMPLATE SAP Table
==============================================
Svc SAP
----------------------------------------------
1 2/1/1:1
2 2/1/1:2
3 2/1/1:3
4 2/1/1:4
5 2/1/1:5
6 2/1/1:6
7 2/1/1:7
8 2/1/1:8
9 2/1/1:9
10 2/1/1:10
----------------------------------------------
Entries found: 10
==============================================
A:Dut-C#
*A:Dut-D# show service id 1 mrp
===============================================================================
Service MRP Information
===============================================================================
Admin State : enabled
-------------------------------------------------------------------------------
MMRP
-------------------------------------------------------------------------------
Admin Status : disabled Oper Status : down
Register Attr Cnt : 0 Declared Attr Cnt: 0
Max Attributes : 1023 Attribute Count : 0
Hi Watermark : 95% Low Watermark : 90%
Failed Registers : 3553 Flood Time : Off
-------------------------------------------------------------------------------
MVRP
-------------------------------------------------------------------------------
Admin Status : enabled Oper Status : up
Max Attr : 4095 Failed Register : 3553
Register Attr Count : 0 Declared Attr : 4
Hi Watermark : 95% Low Watermark : 90%
Hold Time : disabled Attr Count : 0
------------------------------------------------------------------------------
=============================================================================
MRP SAP Table
=============================================================================
SAP Join Leave Leave All Periodic
Time(sec) Time(sec) Time(sec) Time(sec)
-----------------------------------------------------------------------------
1/3/8:0.* 0.2 3.0 10.0 1.0
1/5/6:0.* 0.2 3.0 10.0 1.0
=============================================================================
===============================================================================
*A:Dut-D#
*A:Dut-D# show service id 1 mvrp vlan
-------------------------------------------------------------------------------
SAP Status VLANs
-------------------------------------------------------------------------------
1/3/8:0.* Reg None
Decl 2-5
EndSt None
-------------------------------------------------------------------------------
*A:Dut-D#
*A:Dut-D# show service id 1 mvrp vlan detail
-------------------------------------------------------------------------------
SAP VLANs Registered Declared EndStations
-------------------------------------------------------------------------------
sap:1/3/8:0.* 2 No Yes No
sap:1/3/8:0.* 3 No Yes No
sap:1/3/8:0.* 4 No Yes No
sap:1/3/8:0.* 5 No Yes No
-------------------------------------------------------------------------------
*A:Dut-D#
*A:Dut-B# show service id 1 sap 1/8/4:0.* mrp
===============================================================================
Service Access Points(SAP)
===============================================================================
Service Id : 1
SAP : 1/8/4:0.* Encap : qinq
QinQ Dot1p : Default
Description : Default sap description for service id 1
Admin State : Up Oper State : Up
Flags : None
Multi Svc Site : None
Last Status Change : 07/26/2010 23:35:45
Last Mgmt Change : 07/26/2010 20:09:36
-------------------------------------------------------------------------------
SAP MRP Information
-------------------------------------------------------------------------------
Join Time : 0.2 secs Leave Time : 3.0 secs
Leave All Time : 10.0 secs Periodic Time : 1.0 secs
Periodic Enabled : false
Mrp Policy : N/A
Rx Pdus : 4 Tx Pdus : 3
Dropped Pdus : 0 Tx Pdus : 3
Rx New Event : 20 Rx Join-In Event : 20
Rx In Event : 0 Rx Join Empty Evt : 0
Rx Empty Event : 0 Rx Leave Event : 0
Tx New Event : 20 Tx Join-In Event : 10
Tx In Event : 0 Tx Join Empty Evt : 0
Tx Empty Event : 0 Tx Leave Event : 0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
SAP MMRP Information
-------------------------------------------------------------------------------
MAC Address Registered Declared
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Number of MACs=0 Registered=0 Declared=0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
SAP MVRP Information
-------------------------------------------------------------------------------
Admin Status : enabled Oper Status : enabled
Data SAP Instant. : complete
-------------------------------------------------------------------------------
SAP End-station group information
-------------------------------------------------------------------------------
Group Id Start Vlan Tag End Vlan Tag
-------------------------------------------------------------------------------
1 2 11
-------------------------------------------------------------------------------
Entries found: 1
-------------------------------------------------------------------------------
VLAN Registered Declared EndStations
-------------------------------------------------------------------------------
2 Yes Yes Yes
3 Yes Yes Yes
4 Yes Yes Yes
5 Yes Yes Yes
6 Yes Yes Yes
7 Yes Yes Yes
8 Yes Yes Yes
9 Yes Yes Yes
10 Yes Yes Yes
11 Yes Yes Yes
-------------------------------------------------------------------------------
Number of VLANs=10 Registered=10 Declared=10 EndStations=10
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-B#
bgp
Syntax
bgp
Context
show>service>id
Description
This command displays the bgp information for a given service. The command is available for vpls and epipe services.
Output
Sample Output
The following command corresponds to a VPLS service:
*A:Dut# show service id 1200 bgp
=======================================================================
BGP Information
=======================================================================
Vsi-Import : None
Vsi-Export : None
Route Dist : auto-rd
Oper Route Dist : 192.0.2.69:1200
Oper RD Type : auto
Rte-Target Import : 65000:1200 Rte-Target Export: 65000:1200
Oper RT Imp Origin : configured Oper RT Import : 65000:1200
Oper RT Exp Origin : configured Oper RT Export : 65000:1200
PW-Template Id : None
-----------------------------------------------------------------------
=======================================================================
The following command corresponds to an epipe service:
*A:Dut# show service id 4096 bgp
=======================================================================
BGP Information
=======================================================================
Route Dist : auto-rd
Oper Route Dist : 192.0.2.69:1201
Oper RD Type : auto
Rte-Target Import : 65000:4096 Rte-Target Export: 65000:4096
PW-Template Id : None
-----------------------------------------------------------------------
=======================================================================
provider-tunnel
Syntax
provider-tunnel
Context
show>service>id
Description
This command displays provider tunnel information.
Output
Sample Output
*A:Dut-B# show service id 1 provider-tunnel
=======================================================================
Service Provider Tunnel Information
=======================================================================
Type : inclusive Root and Leaf : enabled
Admin State : inService Data Delay Intvl : 3 secs
PMSI Type : ldp LSP Template :
Remain Delay Intvl : 0 secs LSP Name used : 8193
=======================================================================
*A:Dut-B# /tools dump service id 1 provider-tunnels type originating
=======================================================================
VPLS 1 Inclusive Provider Tunnels Originating
=======================================================================
ipmsi (LDP) P2MP-ID Root-Addr
-----------------------------------------------------------------------
8193 8193 10.20.1.2
-----------------------------------------------------------------------
*A:Dut-B# /tools dump service id 1 provider-tunnels type terminating
=======================================================================
VPLS 1 Inclusive Provider Tunnels Terminating
=======================================================================
ipmsi (LDP) P2MP-ID Root-Addr
-----------------------------------------------------------------------
8193 10.20.1.3
8193 10.20.1.4
8193 10.20.1.6
8193 10.20.1.7
-----------------------------------------------------------------------
*A:Dut-B# /tools dump service id 1 provider-tunnels
=======================================================================
VPLS 1 Inclusive Provider Tunnels Originating
=======================================================================
ipmsi (LDP) P2MP-ID Root-Addr
-----------------------------------------------------------------------
8193 8193 10.20.1.2
-----------------------------------------------------------------------
=======================================================================
VPLS 1 Inclusive Provider Tunnels Terminating
=======================================================================
ipmsi (LDP) P2MP-ID Root-Addr
-----------------------------------------------------------------------
8193 10.20.1.3
8193 10.20.1.4
8193 10.20.1.6
8193 10.20.1.7
-----------------------------------------------------------------------
sdp
Syntax
sdp
Context
show>service>id
Description
This command displays SDPs associated with this service.
Output
Sample Output
*A:Dut-C# show service id 1001 sdp 17407:4294967295 detail
========================================================================
Service Destination Point (Sdp Id : 17407:4294967295) Details
========================================================================
------------------------------------------------------------------------
Sdp Id 17407:4294967295 -(0.0.0.0)
------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 17407:4294967295 Type : VplsPmsi
Split Horiz Grp : (Not Specified)
VC Type : Ether VC Tag : n/a
Admin Path MTU : 9194 Oper Path MTU : 9194
Far End : not applicable Delivery : MPLS
Tunnel Far End : n/a LSP Types : None
Hash Label : Disabled Hash Lbl Sig Cap : Disabled
Oper Hash Label : Disabled
Admin State : Up Oper State : Up
Acct. Pol : None Collect Stats : Disabled
Ingress Label : 0 Egress Label : 3
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
Admin ControlWord : Not Preferred Oper ControlWord : False
Last Status Change : 01/31/2012 00:51:46 Signaling : None
Last Mgmt Change : 01/31/2012 00:49:58 Force Vlan-Vc : Disabled
Endpoint : N/A Precedence : 4
PW Status Sig : Enabled
Class Fwding State : Down
Flags : None
Time to RetryReset : never Retries Left : 3
Mac Move : Blockable Blockable Level : Tertiary
Local Pw Bits : None
Peer Pw Bits : None
Peer Fault Ip : None
Application Profile: None
Max Nbr of MAC Addr: No Limit Total MAC Addr : 0
Learned MAC Addr : 0 Static MAC Addr : 0
MAC Learning : Enabled Discard Unkwn Srce: Disabled
MAC Aging : Enabled
BPDU Translation : Disabled
L2PT Termination : Disabled
MAC Pinning : Disabled
Ignore Standby Sig : False Block On Mesh Fail: False
Oper Group : (none) Monitor Oper Grp : (none)
Rest Prot Src Mac : Disabled
Auto Learn Mac Prot: Disabled RestProtSrcMacAct : Disable
Ingress Qos Policy : (none) Egress Qos Policy : (none)
Ingress FP QGrp : (none) Egress Port QGrp : (none)
Ing FP QGrp Inst : (none) Egr Port QGrp Inst: (none)
------------------------------------------------------------------------
ETH-CFM SDP-Bind specifics
------------------------------------------------------------------------
V-MEP Filtering : Disabled
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Max Drop Count : 3 Hold Down Time : 10
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
I. Fwd. Octs. : 0 I. Dro. Octs. : 0
E. Fwd. Pkts. : 5937639 E. Fwd. Octets : 356258340
MCAC Policy Name :
MCAC Max Unconst BW: no limit MCAC Max Mand BW : no limit
MCAC In use Mand BW: 0 MCAC Avail Mand BW: unlimited
MCAC In use Opnl BW: 0 MCAC Avail Opnl BW: unlimited
-----------------------------------------------------------------------
RSVP/Static LSPs
------------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
------------------------------------------------------------------------
Class-based forwarding :
------------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
========================================================================
FC Mapping Table
========================================================================
FC Name LSP Name
------------------------------------------------------------------------
No FC Mappings
------------------------------------------------------------------------
Stp Service Destination Point specifics
------------------------------------------------------------------------
Stp Admin State : Down Stp Oper State : Down
Core Connectivity : Down
Port Role : N/A Port State : Forwarding
Port Number : 0 Port Priority : 128
Port Path Cost : 10 Auto Edge : Enabled
Admin Edge : Disabled Oper Edge : N/A
Link Type : Pt-pt BPDU Encap : Dot1d
Root Guard : Disabled Active Protocol : N/A
Last BPDU from : N/A
Designated Bridge : N/A Designated Port Id: N/A
Fwd Transitions : 0 Bad BPDUs rcvd : 0
Cfg BPDUs rcvd : 0 Cfg BPDUs tx : 0
TCN BPDUs rcvd : 0 TCN BPDUs tx : 0
TC bit BPDUs rcvd : 0 TC bit BPDUs tx : 0
RST BPDUs rcvd : 0 RST BPDUs tx : 0
------------------------------------------------------------------------
Number of SDPs : 1
------------------------------------------------------------------------
========================================================================
*A:Dut-C#
Connection Profile VLAN Commands
connection-profile-vlan
Syntax
connection-profile-vlan [1...8000]
Context
show
Description
This command displays information about the connection-profiles (VLAN) in the system. When a specific connection profile is shown, the vlan-ranges that it contains are displayed.
Output
Sample Output
*A:Dut# show connection-profile-vlan
=======================================================================
Connection Profile Vlan Summary Information
=======================================================================
CP Index Number of Members
-----------------------------------------------------------------------
1 2
=======================================================================
*A:Dut# show connection-profile-vlan 1
=======================================================================
Connection Profile 1 Information
=======================================================================
Description : (Not Specified)
Last Change : 12/01/2015 16:50:34
=======================================================================
Connection Profile Vlan Eth Information
=======================================================================
Range Start Range End Last Change
-----------------------------------------------------------------------
5 100 12/01/2015 16:50:34
150 300 12/01/2015 16:50:34
=======================================================================
ETH-CFM Show Commands
eth-cfm
Syntax
eth-cfm
Context
show
Description
This command enables the context to display eth-cfm information.
eth-tunnel
Syntax
eth-tunnel
eth-tunnel {aps | status}
eth-tunnel tunnel-index [path path-index] [detail]
Context
show
Description
This command displays Ethernet tunnel information. Any data SAP missing a tag for a defined path has the EthTunTagMismatch flag generated. In the example provided below, SAP eth-tunnel-1:1 does not have the tag for path 2 configured. Therefore, it is operationally down with the reason indicated by the EthTunTagMismatch flag.
Parameters
tunnel-index—
Specifies the tunnel index.
Values—
1..1024
path-index—
Specifies the path index.
Values—
1..16
detail—
Keyword; displays detailed information
status—
Keyword; displays ethernet tunnel status information.
aps—
Keyword; displays APS ethernet tunnel information.
Output
Sample Output
*A:Dut-C>show>service>id# show eth-tunnel status
=============================================================================
Ethernet Tunnel Groups (Status information)
=============================================================================
Tunnel Admin Oper Member Information MEP Information
ID State State Path Tag State Ctrl-MEP CC-Intvl Defects
-----------------------------------------------------------------------------
1 Up Up 1 - 1/1/2 4030 Up Yes 1 -----
2 - 3/1/3 4031 Up Yes 1 -----
2 Up Up 1 - 3/1/1 100 Up Yes 1 -----
2 - 3/1/3 4032 Up Yes 1 -----
65 Up Up 3 - 2/1/4 65.4003 Up - - -----
8 - 1/1/3 65.4008 Up - - -----
16 - 2/1/3 65.4016 Up - - -----
66 Up Up 2 - 2/1/4 66.4002 Up - - -----
4 - 1/1/3 66.4004 Up - - -----
67 Up Up 2 - 3/1/3 672 Up Yes 1 -----
8 - 1/1/2 678 Up Yes 1 -----
68 Up Up 2 - 3/1/3 682 Up - - -----
3 - 3/1/1 683 Up - - -----
1024 Up Up 1 - 2/1/1 1024 Up - - -----
2 - 3/1/2 1024 Up - - -----
=============================================================================
Ethernet Tunnel MEP Defect Legend:
R = Rdi, M = MacStatus, C = RemoteCCM, E = ErrorCCM, X = XconCCM
*A:TOP_NODE# show eth-tunnel aps
===============================================================================
Ethernet Tunnel APS Groups
===============================================================================
Tunnel Admin Oper Working Path Path Active Rx PDU
ID State State Protecting Path State Path Tx PDU
-------------------------------------------------------------------------------
1 Up Up 1 - 5/1/14 3070 Up Yes 0F000000 ( NR)
2 - 2/1/9 3070 Up No 0F000000 ( NR)
2 Up Up 1 - 5/1/6 3071 Up Yes 0F000000 ( NR)
2 - 2/1/13 3071 Up No 0F000000 ( NR)
3 Up Up 1 - 5/1/6 3072 Up Yes 0F000000 ( NR)
2 - 2/1/13 3072 Up No 0F000000 ( NR)
4 Up Up 1 - 2/1/10 4.3073 Up Yes 0F000000 ( NR)
2 - 2/1/4 4.3073 Up No 0F000000 ( NR)
5 Up Up 1 - 2/1/16 5.3074 Up Yes 0F000000 ( NR)
show service id 3131 sap eth-tunnel-1:1
Flags : EthTunTagMismatch
-------------------------------------------------------------------------------
SAP eth-tunnel-1:1
-------------------------------------------------------------------------------
Service Id : 3131
SAP : eth-tunnel-1:1 Encap : q-tag
Description : (Not Specified)
Admin State : Up Oper State : Down
Flags : EthTunTagMismatch
Multi Svc Site : None
Last Status Change : 01/13/2010 19:05:05
Last Mgmt Change : 01/13/2010 17:01:33
Sub Type : regular
Split Horizon Group: (Not Specified)
Admin MTU : 2023 Oper MTU : 2023
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
qinq-pbit-marking : both
Ing Agg Rate Limit : max Egr Agg Rate Limit: max
Endpoint : N/A
Vlan-translation : None
Acct. Pol : None Collect Stats : Disabled
Application Profile: None
-------------------------------------------------------------------------------
Eth-Tunnel Data Information
-------------------------------------------------------------------------------
Path : 2 Tag : 1
association
Syntax
association [ma-index] [detail]
Context
show>eth-cfm
Description
This command displays eth-cfm association information.
Parameters
ma-index—
Specifies the maintenance association (MA) index.
Values—
1— 4294967295
detail—
Displays detailed information for the eth-cfm association.
Output
Show eth-cfm Association Command Output
Table 15describes show eth-cfm association command output fields:
Table 15: ETH-CFM Association Field Descriptions
Label | Description |
Md-index | Displays the the maintenance domain (MD) index. |
Ma-index | Displays the the maintenance association (MA) index. |
Name | Displays the part of the maintenance association identifier which is unique within the maintenance domain name. |
CCM-interval | Displays the CCM transmission interval for all MEPs in the association. |
Bridge-id | Displays the bridge-identifier value for the domain association. |
MHF Creation | Displays the MIP half function (MHF) for the association. |
Primary VLAN | Displays the primary bridge-identifier VLAN ID. |
Num Vids | Displays the number of VIDs associated with the VLAN. |
Remote Mep Id | Displays the remote maintenance association end point (MEP) identifier |
Sample Output
*A:node-1# show eth-cfm association
======================================================================
eth-cfm CFM Association Table
======================================================================
Md-index Ma-index Name CCM-interval Bridge-id
----------------------------------------------------------------------
1 1 test-ma-1 10 2
1 2 2 10 20
======================================================================
*A:node-1#
*A:node-1# show eth-cfm association 1 detail
-------------------------------------------------------------------------------
Domain 1 Associations:
-------------------------------------------------------------------------------
Md-index : 1 Ma-index : 1
Name Format : charString CCM-interval : 10
Name : test-ma-1
Bridge-id : 2 MHF Creation : defMHFnone
PrimaryVlan : 0 Num Vids : 0
Remote Mep Id : 1
Remote Mep Id : 4
Remote Mep Id : 5
-------------------------------------------------------------------------------
*A:node-1#
cfm-stack-table
Syntax
cfm-stack-table
cfm-stack-table [{all-ports | all-sdps | all-virtuals}] [level 0..7] [direction {up | down}]
cfm-stack-table port port-id [vlan qtag[.qtag]] [level 0..7] [direction {up | down}]
cfm-stack-table sdp sdp-id[:vc-id] [level 0..7] [direction {up | down}]
cfm-stack-table virtual service-id [level 0..7]
cfm-stack-table facility [{all-ports | all-lags | all-lag-ports | all-tunnel-meps | all-router-interfaces}] [level 0..7] [direction {up | down}]
cfm-stack-table facility collect-lmm-stats
cfm-stack-table facility lag id [tunnel 1..4094] [level 0..7] [direction {up | down}]
cfm-stack-table facility port id [level 0..7] [direction {up | down}]
cfm-stack-table facility router-interface ip-int-name [level 0..7] [direction {up | down}]
Context
show>eth-cfm
Description
This command displays stack-table information. This stack-table is used to display the various management points (MEPs and MIPs) that are configured on the system. These can be service-based or facility-based. The various options allow the operator to be specific. If no parameters are include then the entire stack-table will be displayed.
Parameters
port-id—
Specifies a bridge port or aggregated port on which MEPs or MHFs are configured.
vlan-id—
Specifies an associated VLAN ID to be displayed.
sdp-id[:vc-id]—
Specifies an SDP for which CFM stack table information will be displayed.
level —
Specifies the MD level of the maintenance point.
Values—
0 — 7
direction {up | down}—
Specifies the direction in which the MP faces on the bridge port.
facility—
Keyword to display the CFM stack table information for facility MEPs. The base command will display all facility MEPs. Options may be included in order to further parse the table for specific facility MEP information.
service-id—
Specifies an SDP for which CFM stack table information will be displayed.
Output
Show eth-cfm CFM Stack Table Command Output
Table 16 describes the show eth-cfm CFM stack table command output fields:
Table 16: ETH-CFM CFM Stack Table Field Descriptions
Label | Description |
Sap | Displays associated SAP IDs. |
Sdp | Displays the SDP binding for the bridge. |
Level Dir | Displays the MD level of the maintenance point. |
Md-index | Displays the the maintenance domain (MD) index. |
Ma-index | Displays the the maintenance association (MA) index. |
Mep-id | Displays the integer that is unique among all the MEPs in the same MA. |
Mac-address | Displays the MAC address of the MP. |
Sample Output
show eth-cfm cfm-stack-table
===============================================================================
CFM Stack Table Defect Legend:
R = Rdi, M = MacStatus, C = RemoteCCM, E = ErrorCCM, X = XconCCM
A = AisRx, L = CSF LOS Rx, F = CSF AIS/FDI rx, r = CSF RDI rx
===============================================================================
CFM SAP Stack Table
===============================================================================
Sap Lvl Dir Md-index Ma-index MepId Mac-address Defect
-------------------------------------------------------------------------------
1/1/6:20.0 4 B 14 803 MIP d8:1c:01:01:00:06 -------
1/1/6:3000.1001 4 B 14 800 MIP 00:00:00:00:00:28 -------
1/1/6:2000.1002 4 B 14 802 MIP d8:1c:01:01:00:06 -------
1/1/6:0.* 4 B 14 805 MIP d8:1c:01:01:00:06 -------
1/1/9:300 2 U 12 300 28 00:00:00:00:00:28 -------
1/1/9:401 2 U 12 401 28 00:00:00:00:00:28 -------
1/1/9:600 2 U 12 600 28 00:00:00:00:00:28 -------
1/1/10:4.* 2 U 12 4 28 00:00:00:00:00:28 --C----
1/1/10:1000.* 5 U 15 1000 28 00:00:00:00:00:28 -------
1/1/10:1001.* 5 U 15 1001 28 00:00:00:00:00:28 -------
1/2/1:2000.2000 4 B 14 2000 MIP 00:00:00:00:01:28 -------
1/2/1:3000.3000 4 B 0 0 MIP d8:1c:01:02:00:01 -------
===============================================================================
===============================================================================
CFM Ethernet Tunnel Stack Table
===============================================================================
Eth-tunnel Lvl Dir Md-index Ma-index MepId Mac-address Defect
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
===============================================================================
CFM Ethernet Ring Stack Table
===============================================================================
Eth-ring Lvl Dir Md-index Ma-index MepId Mac-address Defect
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
===============================================================================
CFM Facility Port Stack Table
===============================================================================
Port Tunnel Lvl Dir Md-index Ma-index MepId Mac-address Defect
-------------------------------------------------------------------------------
1/2/4 0 0 D 10 1 28 00:00:00:00:00:28 -------
===============================================================================
===============================================================================
CFM Facility LAG Stack Table
===============================================================================
Lag Tunnel Lvl Dir Md-index Ma-index MepId Mac-address Defect
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
===============================================================================
CFM Facility Tunnel Stack Table
===============================================================================
Port/Lag Tunnel Lvl Dir Md-index Ma-index MepId Mac-address Defect
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
===============================================================================
CFM Facility Interface Stack Table
===============================================================================
Interface Lvl Dir Md-index Ma-index MepId Mac-address Defect
-------------------------------------------------------------------------------
v28-v33 1 D 11 1 28 00:00:00:00:00:28 -------
===============================================================================
===============================================================================
CFM SAP Primary VLAN Stack Table
===============================================================================
Sap
Primary VlanId Lvl Dir Md-index Ma-index MepId Mac-address Defect
-------------------------------------------------------------------------------
1/1/6:20.*
21 4 B 14 804 MIP d8:1c:01:01:00:06 -------
===============================================================================
===============================================================================
CFM SDP Stack Table
===============================================================================
Sdp Lvl Dir Md-index Ma-index MepId Mac-address Defect
-------------------------------------------------------------------------------
1:1000 4 D 14 1000 28 00:00:00:00:00:28 -------
2:777 4 D 14 777 28 d8:1c:ff:00:00:00 -------
400:800 4 B 14 800 MIP 00:00:00:00:01:28 -------
===============================================================================
===============================================================================
CFM Virtual Stack Table
===============================================================================
Service Lvl Dir Md-index Ma-index MepId Mac-address Defect
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
default-domain
Syntax
default-domain [bridge-identifier bridge-id vlan vlan-id]
Context
show>eth-cfm
Description
This command displays per-MIP index (bridge-identifier and vlan) configuration as entered under the default-domain entries.
Parameters
bridge-id—
The bridge identifier related to the MIP. This is equivalent to the service-id.
vlan-id—
The VLAN ID matching the primary VLAN, or “none” if primary-vlan-enable is not configured.
Output
Table 17 describes the show default domain command output fields.
Table 17: ETH-CFM Default Domain Field Descriptions
Label | Description |
Valid | Indicates whether the row is valid and can be used for MIP creation. It does not indicate whether the row is being used to create the specific MIP. The show command eth-cfm mip-instantiation shows the authoritative creation routine. |
Level | The configured level value |
MhfCreation | The configured mhf-creation mode |
IdPermission | The configured ID permission action |
LtrPriority | The configured MIP LTR priority |
Sample Output
show eth-cfm default-domain
===============================================================================
Default Domain Information
===============================================================================
System Settings
MHF Creation : none Level : 0
Id Permission : none MIP Ltr Priority : 7
===============================================================================
BridgeId VLAN Valid Level MhfCreation IdPermission LtrPriority
-------------------------------------------------------------------------------
2000 none true 3 default none defer
===============================================================================
domain
Syntax
domain [md-index] [association ma-index | all-associations] [detail]
Context
show>eth-cfm
Description
This command displays domain information.
Parameters
md-index—
Displays the index of the MD to which the MP is associated, or 0, if none.
association ma-index—
Displays the index to which the MP is associated, or 0, if none.
all-associations—
Displays all associations to the MD.
detail—
Displays detailed domain information.
Output
Show eth-cfm Domain Command Output
Table 18 describes the show eth-cfm domain command output fields:
Table 18: ETH-CFM Domain Field Descriptions
Label | Description |
Md-index | Displays the Maintenance Domain (MD) index value. |
Level | Displays an integer identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM PDUs. Lower numbers correspond to lower Maintenance Domains, those with more limited physical reach, with the lowest values for CFM PDUs protecting single bridges or physical links. |
Name | Displays a generic Maintenance Domain (MD) name. |
Format | Displays the type of the Maintenance Domain (MD) name. Values include dns, mac, and string. |
Sample Output
*A:node-1# show eth-cfm domain
==============================================================================
eth-cfm CFM Domain Table
==============================================================================
Md-index Level Name Format
------------------------------------------------------------------------------
1 4 test-1 charString
7 4 AA:BB:CC:DD:EE:FF-0 macAddressAndUint
==============================================================================
*A:node-1#
*A:node-1# show eth-cfm domain 1 detail
===============================================================================
Domain 1
Md-index : 1 Level : 4
Permission : sendIdNone MHF Creation : defMHFnone
Name Format : charString Next Ma Index : 3
Name : test-1
===============================================================================
*A:node-1#
mep
Syntax
mep mep-id domain md-index association ma-index [loopback] [linktrace]
mep mep-id domain md-index association ma-index remote-mepid mep-id | all-remote-mepids
mep mep-id domain md-index association ma-index eth-test-results [remote-peer mac-address]
mep mep-id domain md-index association ma-index one-way-delay-test [remote-peer mac-address]
mepmep-id domain md-index association ma-index two-way-delay-test [remote-peer mac-address]
mep mep-id domain md-index association ma-index two-way-slm-test [remote-peer mac-address]
Context
show>eth-cfm
Description
This command displays Maintenance Endpoint (MEP) information.
Parameters
mep-id—
Displays the integer that is unique among all the MEPs in the same MA.
domain md-index—
Displays the index of the MD to which the MP is associated, or 0, if none.
association ma-index—
Displays the index to which the MP is associated, or 0, if none.
loopback—
Displays loopback information for the specified MEP.
linktrace—
Displays linktrace information for the specified MEP.
remote-mepid mep-id—
Includes specified remote mep-id information for specified the MEP.
all-remote-mepids—
Includes all remote mep-id information for the specified MEP.
eth-test-results—
Includes eth-test-result information for the specified MEP.
one-way-delay-test—
Includes one-way-delay-test information for the specified MEP.
two-way-delay-test—
Includes two-way-delay-test information for the specified MEP.
two-way-slm-test—
Includes two-way-slm-test information for the specified MEP.
remote-peer mac-address—
Includes specified remote mep-id information for the specified MEP.
Output
Sample Output
# show eth-cfm mep 101 domain 3 association 1
===============================================================================
Eth-Cfm MEP Configuration Information
===============================================================================
Md-index : 3 Direction : Down
Ma-index : 1 Admin : Enabled
MepId : 101 CCM-Enable : Enabled
IfIndex : 1342177281 PrimaryVid : 6553700
Description : (Not Specified)
FngState : fngReset ControlMep : False
LowestDefectPri : macRemErrXcon HighestDefect : none
Defect Flags : None
Mac Address : d0:0d:1e:00:01:01 ControlMep : False
CcmLtmPriority : 7
CcmTx : 19886 CcmSequenceErr : 0
Fault Propagation : disabled FacilityFault : n/a
MA-CcmInterval : 1 MA-CcmHoldTime : 0ms
Eth-1Dm Threshold : 3(sec) MD-Level : 3
Eth-Ais: : Enabled Eth-Ais Rx Ais: : No
Eth-Ais Tx Priorit*: 7 Eth-Ais Rx Interv*: 1
Eth-Ais Tx Interva*: 1 Eth-Ais Tx Counte*: 388
Eth-Ais Tx Levels : 5
Eth-Tst: : Disabled
Redundancy:
MC-LAG State : active
CcmLastFailure Frame:
None
XconCcmFailure Frame:
None
===============================================================================
show eth-cfm mep 607 domain 6 association 607
===============================================================================
Eth-Cfm MEP Configuration Information
===============================================================================
Md-index : 6 Direction : Down
Ma-index : 607 Admin : Enabled
MepId : 607 CCM-Enable : Enabled
IfIndex : 1342177283 PrimaryVid : 268369927
Description : (Not Specified)
FngState : fngReset ControlMep : False
LowestDefectPri : macRemErrXcon HighestDefect : none
Defect Flags : None
Mac Address : 8c:d3:ff:00:01:43 ControlMep : False
CcmLtmPriority : 7
CcmTx : 78122 CcmSequenceErr : 0
Fault Propagation : useIfStatusTLV FacilityFault : n/a
MA-CcmInterval : 1 MA-CcmHoldTime : 0ms
Eth-1Dm Threshold : 3(sec) MD-Level : 6
Eth-Ais: : Disabled
Eth-Tst: : Disabled
Redundancy:
MC-LAG State : n/a
CcmLastFailure Frame:
None
XconCcmFailure Frame:
None
===============================================================================
show eth-cfm association
===============================================================================
CFM Association Table
===============================================================================
Md-index Ma-index Name CCM-intrvl Hold-time Bridge-id
-------------------------------------------------------------------------------
2 106 MA-0000000106 1 n/a none
2 207 MA-0000000207 1 n/a none
2 308 MA-0000000308 1 n/a none
3 1 ma-0000000001 1 n/a none
3 2 ma-0000000002 1 n/a none
3 3 ma-0000000003 1 n/a none
3 4 ma-0000000004 1 n/a none
3 5 ma-0000000005 1 n/a none
5 555 MA-0000000555 10 n/a 47
6 607 MA-0000000607 1 n/a 207
7 707 MA-0000000707 1 n/a 207
===============================================================================
*A:sr7_A# show eth-cfm mep 1 domain 103 association 99 all-remote-mepids
===========================================================================
Eth-CFM Remote-Mep Table
===========================================================================
R-mepId Rx CC Rx Rdi Port-Tlv If-Tlv peer Mac Addr CCM status since
---------------------------------------------------------------------------
2 True False Up Up 8a:d9:ff:00:00:00 02/17/2009 16:27:48
3 True False Up Up 8a:da:01:01:00:02 02/17/2009 16:27:48
===========================================================================
*A:sr7_A#
*A:sr7_A# show eth-cfm mep 1 domain 103 association 99 remote-mepid 3
===========================================================================
Eth-CFM Remote-Mep Table
===========================================================================
R-mepId Rx CC Rx Rdi Port-Tlv If-Tlv peer Mac Addr CCM status since
---------------------------------------------------------------------------
3 True False Up Up 8a:da:01:01:00:02 02/17/2009 16:27:48
===========================================================================
*A:sr7_A#
*A:7710_C# show eth-cfm mep 1 domain 103 association 99 eth-test-results
==============================================================
Eth CFM ETH-Test Result Table
==============================================================
Current Accumulate
FrameCount ErrBits ErrBits
Peer Mac Addr ByteCount CrcErrs CrcErrs
--------------------------------------------------------------
22:34:56:78:9a:bc 1 0 0
100 0 0
32:34:56:78:9a:bc 1 0 0
100 0 0
42:34:56:78:9a:bc 1 0 0
100 0 0
52:34:56:78:9a:bc 1 0 0
100 0 0
62:34:56:78:9a:bc 1 0 0
100 0 0
72:34:56:78:9a:bc 1 0 0
100 0 0
82:34:56:78:9a:bc 1 0 0
100 0 0
92:34:56:78:9a:bc 1 0 0
100 0 0
c2:34:56:78:9a:bc 1 0 0
100 0 0
d2:34:56:78:9a:bc 1 0 0
100 0 0
==============================================================
*A:7710_C#
*A:7710_C# show eth-cfm mep 1 domain 103 association 99 eth-test-results remote-peer
22:34:56:78:9a:bc
==============================================================
Eth CFM ETH-Test Result Table
==============================================================
Current Accumulate
FrameCount ErrBits ErrBits
Peer Mac Addr ByteCount CrcErrs CrcErrs
--------------------------------------------------------------
22:34:56:78:9a:bc 1 0 0
100 0 0
==============================================================
*A:7710_C#
*A:7710_C# show eth-cfm mep 1 domain 103 association 99 one-way-delay-test
==================================================================
Eth CFM One-way Delay Test Result Table
==================================================================
Peer Mac Addr Delay (us) Delay Variation (us)
------------------------------------------------------------------
8a:d8:01:01:00:01 759606 2840
aa:bb:cc:dd:ee:ff 760256 760256
==================================================================
*A:7710_C#
*A:7710_C# show eth-cfm mep 1 domain 103 association 99 one-way-delay-test remote-
peer 8a:d8:01:01:00:01
==================================================================
Eth CFM One-way Delay Test Result Table
==================================================================
Peer Mac Addr Delay (us) Delay Variation (us)
------------------------------------------------------------------
8a:d8:01:01:00:01 759606 2840
==================================================================
*A:7710_C#
*A:sim_B# show eth-cfm mep 2 domain 103 association 99 two-way-delay-test
==================================================================
Eth CFM Two-way Delay Test Result Table
==================================================================
Peer Mac Addr Delay (us) Delay Variation (us)
------------------------------------------------------------------
00:16:4d:54:49:db 10190 13710
==================================================================
*A:sim_B#
*A:sim_B# show eth-cfm mep 2 domain 103 association 99 two-way-delay-test remote-peer
00:16:4D:54:49:DB
==================================================================
Eth CFM Two-way Delay Test Result Table
==================================================================
Peer Mac Addr Delay (us) Delay Variation (us)
------------------------------------------------------------------
00:16:4d:54:49:db 10190 13710
==================================================================
*A:sim_B#
domain 14 format none level 4
association 1 format icc-based name "test000000001"
bridge-identifier 3
exit
auto-mep-discovery
ccm-interval 1
remote-mepid 409
exit
exit
show eth-cfm mep 28 domain 14 association 2 all-remote-mepids
=============================================================================
Eth-CFM Remote-Mep Table
=============================================================================
R-mepId AD Rx CC RxRdi Port-Tlv If-Tlv Peer Mac Addr CCM status since
-----------------------------------------------------------------------------
30 T True False Up Up 00:00:00:00:00:30 02/03/2014 21:05:01
32 True False Up Up 00:00:00:00:00:32 02/03/2014 21:04:32
=============================================================================
Entries marked with a 'T' under the 'AD' column have been auto-discovered.
show eth-cfm domain 14 association 2 detail
===============================================================================
Domain 14
Md-index : 14 Level : 4
MHF Creation : defMHFnone
Name Format : none Next Ma Index : 1
Name : (Not Specified)
Creation Origin : manual
-------------------------------------------------------------------------------
Domain 14 Associations:
Md-index : 14 Ma-index : 2
Name Format : icc-based CCM-interval : 1
Auto Discover : True CCM-hold-time : n/a
Name : epipe00000005
Permission : sendIdNone
Bridge-id : 5 MHF Creation : defMHFnone
PrimaryVlan : 0 Num Vids : 0
MIP LTR Priority : 7
Total MEP Count : 3
Remote Mep Id : 30 (AutoDiscovered) Remote MAC Addr : default
Remote Mep Id : 32 Remote MAC Addr : default
===============================================================================
mip
Syntax
mip
Context
show>eth-cfm
Description
This command displays SAPs/bindings provisioned for allowing the default MIP creation.
mip-instantiation
Syntax
mip-instantiation [level level] [{sap sap-id | sdp sdp-id}]
Context
show>eth-cfm
Description
This command displays the active MIPs created on the node, their related object values, and the SAP or SDP binding. The attributes include a column that indicates which MIP table was responsible and authoritative for the specific active attribute. Authorities can be the association (asn), default-domain (def), or the global read-only values (sys).
Parameters
level—
The level for which all created MIPs will be displayed
Values—
0 — 7
sap-id—
The SAP for which created MIPs will be displayed
sdp-id—
The SDP binding for which created MIPs will be displayed
Output
Table 19 describes the show MIP instantiation command output fields.
Table 19: ETH-CFM MIP Instantiation Field Descriptions
Label | Description |
VLAN | The primary vlan-id associated with the MIP, or “none” if primary-vlan-enable is not configured |
L | Numerical value indicating the CFM level of the MIP |
LA | Level authority indicating the creation routine responsible for the level |
Creation | The MHF creation mode that was used to create the MIP |
CA | The creation authority |
IdPerm | Indicates if the SenderID TLV is being included (chassis) or not (none) |
IdA | The IdPermission authority |
Pri | The numerical value that indicates the mip-ltr-priority |
PA | The mip-ltr-priority authority |
Sample Output
show eth-cfm mip-instantiation
===============================================================================
CFM SAP MIP Instantiation Information
===============================================================================
SAP Lvl LA Creation CA IdPerm IdA Pri PA
-------------------------------------------------------------------------------
1/2/1:2000.2000 4 asn default asn chassis asn 7 asn
1/2/1:3000.3000 4 def default def none sys 7 sys
-------------------------------------------------------------------------------
No. of SAP MIPs: 2
===============================================================================
===============================================================================
CFM SAP Primary VLAN MIP Instantiation Information
===============================================================================
SAP VLAN Lvl LA Creation CA IdPerm IdA Pri PA
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
===============================================================================
CFM SDP MIP Instantiation Information
===============================================================================
SDP Lvl LA Creation CA IdPerm IdA Pri PA
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
sdp
Syntax
sdp [sdp-id | far-end ip-address] [detail | keep-alive-history]
Context
show>service
Description
This command displays SDP information.
Parameters
sdp-id—
Specifies the SDP ID.
Values—
1..17407
ip-address—
Specifies the IP address (a..b.c.d).
detail—
Adds details to the display
keep-alive-history—
Displays the keep-alive-history
Output
Sample Output
*A:Dut-A# show service sdp 1 detail
==============================================================================
Service Destination Point (Sdp Id : 1) Details
------------------------------------------------------------------------------
Sdp Id 1 -(10.20.1.3)
------------------------------------------------------------------------------
Description : epipe sdp 1 for lspId 00:00:00:01:00:00:00:00
SDP Id : 1 SDP Source : manual
Admin Path MTU : 0 Oper Path MTU : 1492
Far End : 10.20.1.3 Delivery : MPLS
Admin State : Up Oper State : Up
Signaling : TLDP Metric : 0
Acct. Pol : None Collect Stats : Disabled
Last Status Change : 12/08/2008 22:54:30 Adv. MTU Over. : No
Last Mgmt Change : 12/08/2008 22:54:01 VLAN VC Etype : 0x8100
Bw BookingFactor : 100 PBB Etype : 0x88e7
Oper Max BW(Kbps) : 1000 Avail BW(Kbps) : 1000
Flags : None
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
Associated LSP LIST :
Lsp Name : tof1
Admin State : Up Oper State : Up
Time Since Last Tran*: 00h04m01s
------------------------------------------------------------------------------
Class-based forwarding :
------------------------------------------------------------------------------
Class forwarding : disabled EnforceDSTELspFc : disabled
Default LSP : Uknwn Multicast LSP : None
==============================================================================
FC Mapping Table
==============================================================================
FC Name LSP Name
------------------------------------------------------------------------------
No FC Mappings
==============================================================================
* indicates that the corresponding row element may have been truncated.
system-config
Syntax
system-config
Context
show>eth-cfm
Description
This command shows various system level configuration parameters. These global eth-cfm commands are those which are configured directly under the config>eth-cfm context.
Output
Sample Output
# show eth-cfm system-config
===============================================================================
CFM System Configuration
===============================================================================
Redundancy
MC-LAG Standby MEP Shutdown: true
MC-LAG Hold-Timer : 1 second(s)
Synthetic Loss Measurement
Inactivity Timer : 100 second(s)
===============================================================================
eth-ring
Syntax
eth-ring [status]
eth-ring [ring-index] hierarchy
eth-ring ring-index [path {a | b}]
Context
show
Description
This command displays Ethernet Ring information.
Parameters
status—
Keyword to display an Ethernet Ring status summary
ring-index—
Specifies an Ethernet Ring index
Values—
1 — 128
hierarchy—
Keyword to display Ethernet Ring hierarchical relationships
path—
Keyword to show information for a specific path