Show, Clear, and Debug Command Reference
Command Hierarchies
Show Commands
The show L2TP commands apply only to the 7750 SR and 7450 ESS.
show
— router [router-instance]
— router service-name service-name
— arp [ip-int-name | ip-address/mask | mac ieee-mac-address | summary] [local | dynamic | static | managed]
— statistics policy name
— bfd
— bfd-template template-name
— session lsp-name lsp-name
— session {src ip-address/link-local address dest ip-address | link-local address} detail lsp-rsvp {head | tail} tunnel-id tunnel-id lsp-id lsp-id
— session mpls-tp
— session p2mp-interface interface-name detail
— session src ip-address/link-local address detail lsp-rsvp {head | tail} rsvp-session-name rsvp-session-name
— session summary
— dhcp
— summary
— dhcp6
— summary
— ecmp
— fib slot-number nh-table-usage
— l2tp
— group [detail] [session-id session-id (v2)] [state session-state] [peer ip-address] [group group-name] [assignment-id assignment-id] [local-name local-host-name] [remote-name remote-host-name] [tunnel-id tunnel-id (v2)]
— session [detail] [state session-state] [peer ip-address] [group group-name] [assignment-id assignment-id] [local-name local-host-name] [remote-name remote-host-name] [control-connection-id connection-id (v3)]
— tunnel [statistics] [detail] [peer ip-address] [state tunnel-state] [remote-connection-id remote-connection-id (v3)] [group group-name] [assignment-id assignment-id] [local-name host-name] [remote-name host-name] | tunnel [statistics] [detail] [peer ip-address] [state tunnel-state] [remote-tunnel-id remote-tunnel-id (v2)] [group group-name] [assignment-id assignment-id] [local-name host-name] [remote-name host-name]
— ldp
— bindings active
— mvpn
— route-table [family] [ip-prefix[/prefix-length] [longer | exact | protocol protocol-name] [all]] [next-hop-type type] [qos] [alternative]
— sgt-qos
— static-route [family] [[ip-prefix /mask] | [preference preference] | [next-hop ip-address] | [tag tag] [detail]
— status
— tms routes
— tunnel-table mpls-tp
Clear Commands
Debug Commands
debug
— trace
— destination trace-destination
— enable
— [no] trace-point [module module-name] [type event-type] [class event-class] [task task-name] [function function-name]
— router router-instance
— ip
— icmp
— no icmp
— no icmp6
— [no] neighbor
— no route-table
— l2tp
— mtrace
Command Descriptions
Show Commands
The following command outputs are examples only; actual displays may differ depending on supported functionality and user configuration.
router
Syntax
router [router-instance]
router service-name service-name
Context
show
Description
This command enables the context to display various types of information for the specified router instance.
Parameters
router-instance—
specifies the router name, CPM router instance, or VPRN service ID
Values—
router-instance : router name | vprn-svc-id | ||
router-name | Base | management | cpm-vr-name | vpls-management | |
cpm-vr-name | [32 characters maximum] | |
vprn-svc-id | [1..2147483647] | |
Values—
Base
service-name—
specifies the service name, up to 64 characters
Output
Sample Output: show router with PIM and S-PMSI
*A:Dut-D# \show router 100 pim s-pmsi
===============================================================================
PIM RSVP Spmsi tunnels
===============================================================================
P2mp Tunnel ID Ext Tunnel Adrs SPMSI Index Num State Multistr
e
ID VPN
SGs am-ID
------------------------------------------------------------------------------------
-----------------------
100 61442 10.20.1.4 73919 8 U
p 10
===============================================================================
PIM RSVP Spmsi Interfaces : 1
===============================================================================
*A:Dut-D# \show router 100 pim s-pmsi detail
===============================================================================
PIM RSVP Spmsi tunnels
===============================================================================
P2MP ID : 100 Tunnel ID : 61442
Ext Tunnnel Addrs : 10.20.1.4 Spmsi IfIndex : 73919
Number of VPN SGs : 8 Up Time : 0d 00:01:04
VPN Group Address : 232.100.0.0
VPN Source Address : 100.114.1.2
Up Time : 0d 00:01:04 Multistream-Id : 10
State : TX Joined Mdt Threshold : N/A
Join Timer : N/A Holddown Timer : 0d 00:00:54
VPN Group Address : 232.100.0.1
VPN Source Address : 100.114.1.2
Up Time : 0d 00:01:04 Multistream-Id : 10
State : TX Joined Mdt Threshold : N/A
Join Timer : N/A Holddown Timer : 0d 00:00:55
VPN Group Address : 232.100.0.2
VPN Source Address : 100.114.1.2
Up Time : 0d 00:01:04 Multistream-Id : 5
State : TX Joined Mdt Threshold : N/A
Join Timer : N/A Holddown Timer : 0d 00:00:53
aggregate
Syntax
aggregate [family] [active]
Context
show>router
Description
This command displays aggregate routes.
Parameters
family—
specifies whether IPv4 or IPv6 aggregate routes are displayed
Values—
ipv4, ipv6
active—
When the active keyword is specified, inactive aggregates are filtered out.
Output
The following output is an example of aggregate route information.
Sample Output
*A:CPM133>config>router# show router aggregate
===============================================================================
Aggregates (Router: Base)
===============================================================================
Prefix Aggr IP-Address Aggr AS
Summary AS Set State
NextHop Community NextHopType
-------------------------------------------------------------------------------
10.0.0.0/8 0.0.0.0 0
False False Inactive
100:33 Blackhole
-------------------------------------------------------------------------------
No. of Aggregates: 1
===============================================================================
*A:CPM133>config>router#
arp
Syntax
arp [ip-int-name | ip-address/mask | mac ieee-mac-address | summary] [local | dynamic | static | managed]
Context
show>router
Description
This command displays the router ARP table sorted by IP address. If no command line options are specified, all ARP entries are displayed.
Parameters
ip-address/mask—
only displays ARP entries associated with the specified IP address and mask
ip-int-name—
only displays ARP entries associated with the specified IP interface name
mac ieee-mac-addr—
only displays ARP entries associated with the specified MAC address
summary—
displays an abbreviate list of ARP entries
[local | dynamic | static | managed]—
only displays ARP information associated with the keyword
Output
ARP Table Output — The following output is an example of router ARP table information, and Table 8 describes the ARP table output fields.
Sample Output
*B:7710-Red-RR# show router arp
===============================================================================
ARP Table (Router: Base)
===============================================================================
IP Address MAC Address Expiry Type Interface
-------------------------------------------------------------------------------
10.20.1.24 00:16:4d:23:91:b8 00h00m00s Oth system
10.10.4.11 00:03:fa:00:d0:c9 00h57m03s Dyn[I] to-core-sr1
10.10.4.24 00:03:fa:41:8d:20 00h00m00s Oth[I] to-core-sr1
-------------------------------------------------------------------------------
No. of ARP Entries: 3
===============================================================================
A:ALA-A# show router ARP 10.10.0.3
===============================================================================
ARP Table
===============================================================================
IP Address MAC Address Expiry Type Interface
-------------------------------------------------------------------------------
10.10.0.3 04:5d:ff:00:00:00 00:00:00 Oth system
===============================================================================
A:ALA-A#
A:ALA-A# show router ARP to-ser1
===============================================================================
ARP Table
===============================================================================
IP Address MAC Address Expiry Type Interface
-------------------------------------------------------------------------------
10.10.13.1 04:5b:01:01:00:02 03:53:09 Dyn to-ser1
===============================================================================
A:ALA-A#
Table 8: ARP Fields
Label | Description |
IP Address | The IP address of the ARP entry. |
MAC Address | The MAC address of the ARP entry. |
Expiry | The age of the ARP entry. |
Type | Dyn The ARP entry is a dynamic ARP entry. Inv The ARP entry is an inactive static ARP entry (invalid). Oth The ARP entry is a local or system ARP entry. Sta The ARP entry is an active static ARP entry. |
*Man | The ARP entry is a managed ARP entry. |
Int | The ARP entry is an internal ARP entry. |
[I} | The ARP entry is in use. |
Interface | The IP interface name associated with the ARP entry. |
No. of ARP Entries | The number of ARP entries displayed in the list. |
authentication
Syntax
authentication
Context
show>router
Description
This command enables the command to display authentication statistics.
statistics
Syntax
statistics
statistics interface [ip-int-name | ip-address]
statistics policy name
Context
show>router>authentication
Description
This command displays interface or policy authentication statistics.
Parameters
interface [ip-int-name | ip-address]—
specifies an existing interface name or IP address
Values—
ip-int-name: 32 chars max
ip-address: a.b.c.d
policy name—
specifies an existing policy name
Output
Authentication Statistics Output — The following output is an example of authentication statistics, and Table 9 describes the fields.
Sample Output
A:ALU-3>show>router>auth# statistics
===================================================================
Authentication Global Statistics
===================================================================
Client Packets Authenticate Fail : 0
Client Packets Authenticate Ok : 12
===================================================================
Table 9: Authentication Statistics Fields
Label | Description |
Client Packets Authenticate Fail | The number of packets that failed authentication. |
Client Packets Authenticate Ok | The number of packets that were authenticated. |
bfd
Syntax
bfd
Context
show>router
Description
This command enables the context to display bi-directional forwarding detection (BFD) information.
Output
The following output is an example of BFD information.
Sample Output
*A:Dut-D# show router 3 bfd session
===============================================================================
BFD Session
===============================================================================
InterfaceState Tx Intvl Rx Intvl Multipl
Remote Address Protocols Tx Pkts Rx Pkts Type
-------------------------------------------------------------------------------
ies-3-121.1.3.3 Up (3) 10 10 3
121.1.3.2 ospf2 N/A N/A cpm-np
ies-3-122.1.4.3 Up (3) 100 100 3
122.1.4.2 pim 455 464 iom
-------------------------------------------------------------------------------
No. of BFD sessions: 2
===============================================================================
*A:Dut-D#
*A:Dut-C# show router bfd session src 11.120.1.4 dest 11.120.1.3
===============================================================================
BFD Session
===============================================================================
Remote Address : 11.120.1.3
Admin State : Up Oper State : Up (3)
Protocols : static
Rx Interval : 10 Tx Interval : 10
Multiplier : 3 Echo Interval : 0
Up Time : 1d 19:03:28 Up Transitions : 2
Down Time : None Down Transitions : 1
Version Mismatch : 0
Forwarding Information
Local Discr : 19269 Local State : Up (3)
Local Diag : 0 (None) Local Mode : Async
Local Min Tx : 10 Local Mult : 3
Last Sent (ms) : 6 Local Min Rx : 10
Type : cpm-np
Remote Discr : 5101 Remote State : Up (3)
Remote Diag : 0 (None) Remote Mode : Async
Remote Min Tx : 1000 Remote Mult : 3
Last Recv (ms) : 367 Remote Min Rx : 10
===============================================================================
*A:Dut-C#
bfd-template
Syntax
bfd-template template-name
Context
show>router>bfd
Description
This command displays BFD template information.
Output
The following output is an example of BFD template information.
Sample Output
*A:mlstp-dutA# show router bfd bfd-template "privatebed-bfd-template"
===============================================================================
BFD Template privatebed-bfd-template
===============================================================================
Template Name : privatebed-* Template Type : cpmNp
Transmit Timer : 10 msec Receive Timer : 10 msec
CV Transmit Interval : 1000 msec
Template Multiplier : 3 Echo Receive Interval : 100 msec
Mpls-tp Association
privatebed-oam-template
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:mlstp-dutA# show router bfd session
===============================================================================
BFD Session
===============================================================================
Interface/Lsp Name State Tx Intvl Rx Intvl Multipl
Remote Address/Info Protocols Tx Pkts Rx Pkts Type
-------------------------------------------------------------------------------
wp::lsp-32 Down (1) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
wp::lsp-33 Down (1) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
wp::lsp-34 Down (1) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
wp::lsp-35 Down (1) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
wp::lsp-36 Down (1) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
wp::lsp-37 Down (1) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
wp::lsp-38 Down (1) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
wp::lsp-39 Down (1) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
wp::lsp-40 Down (1) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
wp::lsp-41 Down (1) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
pp::lsp-32 Up (3) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
pp::lsp-33 Up (3) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
pp::lsp-34 Up (3) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
pp::lsp-35 Up (3) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
pp::lsp-36 Up (3) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
pp::lsp-37 Up (3) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
pp::lsp-38 Up (3) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
pp::lsp-39 Up (3) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
pp::lsp-40 Up (3) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
pp::lsp-41 Up (3) 1000 1000 3
0::0.0.0.0 mplsTp N/A N/A cpm-np
-------------------------------------------------------------------------------
No. of BFD sessions: 20
-------------------------------------------------------------------------------
wp = Working path pp = Protecting path
===============================================================================
interface
Syntax
interface [interface-name]
Context
show>router>bfd
Description
This command displays interface information.
Output
The following output is an example of BFD interface information, and Table 10 describes the fields.
Sample Output
*A:Dut-B# show router bfd interface
===============================================================================
BFD Interface
===============================================================================
Interface name Tx Interval Rx Interval Multiplier
-------------------------------------------------------------------------------
port-1-1 500 500 3
port-1-1 10 10 3
port-1-2 500 500 3
port-1-2 10 10 3
port-1-3 500 500 3
port-1-3 10 10 3
port-1-4 500 500 3
port-1-4 10 10 3
port-1-5 500 500 3
...
===============================================================================
Table 10: BFD Interface Fields
Label | Description |
TX Interval | Displays the interval, in milliseconds, between the transmitted BFD messages to maintain the session |
RX Interval | Displays the expected interval, in milliseconds, between the received BFD messages to maintain the session |
Multiplier | Displays the integer used by BFD to declare when the neighbor is down. |
session
Syntax
session detail lsp-rsvp {head | tail}
session {ipv4 | ipv6} detail [lag lag-id] lag-port port-id
session lsp-name Lsp Name
session lsp-rsvp {head | tail}
session src ip-address/link-local address dest ip-address | link-local address detail lsp-rsvp {head | tail} tunnel-id tunnel-id lsp-id lsp-id
session mpls-tp
session lsp-name Lsp Name [link-type {cc-only | cc-cv}] detail
session p2mp-interface interface-name detail
session src ip-address/link-local address detail lsp-rsvp {head | tail} rsvp-session-name rsvp-session-name
session [src ip-address/link-local address] [ipv4 | ipv6]
session src ip-address/link-local address dest ip-address | link-local address
session src ip-address/link-local address detail
session summary
session type type [ipv4 | ipv6]
Context
show>router>bfd
Description
This command displays session information.
Parameters
ip-address—
only displays the interface information associated with the specified IP address
Values—
ipv4-address: a.b.c.d (host bits must be 0)
type—
specifies the session type
Values—
iom | central | cpm-np
Output
The following output is an example of BFD session information, and Table 11 describes the fields.
Sample Output
A:Dut-B# show router bfd session
===============================================================================
BFD Session
===============================================================================
Interface State Tx Intvl Rx Intvl Multipl
Remote Address Protocols Tx Pkts Rx Pkts Type
-------------------------------------------------------------------------------
port-1-1 Up (3) 500 500 3
10.1.1.3 pim isis 50971 50718 iom
port-1-1 Up (3) 10 10 3
3FFE::A01:103 static bgp N/A N/A cpm-np
port-1-1 Up (3) 10 10 3
FE80::A0A:A03 pim isis ospf3 N/A N/A cpm-np
port-1-2 Up (3) 500 500 3
10.2.1.3 pim isis 50968 50718 iom
port-1-2 Up (3) 10 10 3
3FFE::A02:103 static bgp N/A N/A cpm-np
port-1-2 Up (3) 10 10 3
...
===============================================================================
*A:Dut-B#
A:Dut-B# show router bfd session src 3FFE::A01:102 dest 3FFE::A01:103
===============================================================================
BFD Session
===============================================================================
Remote Address : 3FFE::A01:103
Admin State : Up Oper State : Up (3)
Protocols : static bgp
Rx Interval : 10 Tx Interval : 10
Multiplier : 3 Echo Interval : 0
Up Time : 0d 07:24:54 Up Transitions : 1
Down Time : None Down Transitions : 0
Version Mismatch : 0
Forwarding Information
Local Discr : 2051 Local State : Up (3)
Local Diag : 0 (None) Local Mode : Async
Local Min Tx : 10 Local Mult : 3
Last Sent (ms) : 5 Local Min Rx : 10
Type : cpm-np
Remote Discr : 1885 Remote State : Up (3)
Remote Diag : 0 (None) Remote Mode : Async
Remote Min Tx : 10 Remote Mult : 3
Last Recv (ms) : 1 Remote Min Rx : 10
===============================================================================
A:Dut-B#
*A:Dut-B# show router bfd session src FE80::A0A:A02-port-1-10 dest FE80::A0A:A03-
port-1-10
===============================================================================
BFD Session
===============================================================================
Remote Address : FE80::A0A:A03
Admin State : Up Oper State : Up (3)
Protocols : pim isis ospf3
Rx Interval : 10 Tx Interval : 10
Multiplier : 3 Echo Interval : 0
Up Time : 0d 07:10:20 Up Transitions : 3
Down Time : None Down Transitions : 2
Version Mismatch : 0
Forwarding Information
Local Discr : 42 Local State : Up (3)
Local Diag : 3 (Neighbor signalled s* Local Mode : Async
Local Min Tx : 10 Local Mult : 3
Last Sent (ms) : 6 Local Min Rx : 10
Type : cpm-np
Remote Discr : 270 Remote State : Up (3)
Remote Diag : 0 (None) Remote Mode : Async
Remote Min Tx : 10 Remote Mult : 3
Last Recv (ms) : 8 Remote Min Rx : 10
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-D#
*A:Dut-B# show router bfd session ipv4
===============================================================================
BFD Session
===============================================================================
Interface State Tx Intvl Rx Intvl Multipl
Remote Address Protocols Tx Pkts Rx Pkts Type
-------------------------------------------------------------------------------
port-1-1 Up (3) 500 500 3
10.1.1.3 pim isis 51532 51279 iom
port-1-2 Up (3) 500 500 3
10.2.1.3 pim isis 51529 51279 iom
port-1-3 Up (3) 500 500 3
10.3.1.3 pim isis 51529 51279 iom
port-1-4 Up (3) 500 500 3
10.4.1.3 pim isis 51529 51279 iom
port-1-5 Up (3) 500 500 3
10.5.1.3 pim isis 51529 51279 iom
port-1-6 Up (3) 500 500 3
10.6.1.3 pim isis 51529 51279 iom
...
===============================================================================
*A:Dut-B#
*A:Dut-B# show router bfd session ipv6
===============================================================================
BFD Session
===============================================================================
Interface State Tx Intvl Rx Intvl Multipl
Remote Address Protocols Tx Pkts Rx Pkts Type
-------------------------------------------------------------------------------
port-1-1 Up (3) 10 10 3
3FFE::A01:103 static bgp N/A N/A cpm-np
port-1-1 Up (3) 10 10 3
FE80::A0A:A03 pim isis ospf3 N/A N/A cpm-np
port-1-2 Up (3) 10 10 3
3FFE::A02:103 static bgp N/A N/A cpm-np
port-1-2 Up (3) 10 10 3
FE80::A0A:A03 pim isis ospf3 N/A N/A cpm-np
port-1-3 Up (3) 10 10 3
3FFE::A03:103 static bgp N/A N/A cpm-np
port-1-3 Up (3) 10 10 3
FE80::A0A:A03 pim isis ospf3 N/A N/A cpm-np
port-1-4 Up (3) 10 10 3
3FFE::A04:103 static bgp N/A N/A cpm-np
port-1-4 Up (3) 10 10 3
...
===============================================================================
*A:Dut-B#
*A:Dut-D# show router bfd session summary
=============================
BFD Session Summary
=============================
Termination Session Count
-----------------------------
central 0
cpm-np 500
iom, slot 1 0
iom, slot 2 0
iom, slot 3 250
iom, slot 4 0
iom, slot 5 0
Total 750
=============================
*A:Dut-D#
*A:Dut-B# show router bfd session detail lsp-
rsvp head src 10.20.1.2 dest 10.20.1.5 tunnel-id 1 lsp-id 31744
===============================================================================
BFD On LSP Session
===============================================================================
Rsvp Session Name : lsp1::path1
Remote Address : 10.20.1.5
Lsp Id : 31744 Tunnel Id : 1
Oper State : Up Protocols : lsp
Recd Msgs : 240 Sent Msgs : 240
Up Time : 0d 00:03:58 Up Transitions : 1
Down Time : None Down Transitions : 0
Version Mismatch : 0
Forwarding Information
Local Discr : 1 Local State : Up
Local Diag : 0 (None)
Local Mode : Async
Local Min Tx : 1000 Local Mult : 3
Last Sent : 07/28/2015 19:05:13 Local Min Rx : 1000
Type : central
Remote Discr : 1 Remote State : Up
Remote Diag : 0 (None) Remote Mode : Async
Remote Min Tx : 1000 Remote Mult : 3
Last Recv : 07/28/2015 19:05:13 Remote Min Rx : 1000
===============================================================================
===============================================================================
Table 11: BFD Session Field Descriptions
Label | Description |
State | Displays the administrative state for this BFD session. |
Protocol | Displays the active protocol. |
Tx Intvl | Displays the interval, in milliseconds, between the transmitted BFD messages to maintain the session |
Tx Pkts | Displays the number of transmitted BFD packets. |
Rx Intvl | Displays the expected interval, in milliseconds, between the received BFD messages to maintain the session |
Rx Pkts | Displays the number of received packets. |
Mult | Displays the integer used by BFD to declare when the neighbor is down. |
dhcp
Syntax
dhcp
Context
show>router
Description
This command enables the context to display DHCP related information.
dhcp6
Syntax
dhcp6
Context
show>router
Description
This command enables the context to display DHCP6 related information.
statistics
Syntax
statistics [ip-int-name | ip-address]
Context
show>router>dhcp
show>router>dhcp6
Description
This command displays statistics for DHCP relay and DHCP snooping.
If no IP address or interface name is specified, then all configured interfaces are displayed.
If an IP address or interface name is specified, then only data regarding the specified interface is displayed.
Parameters
ip-int-name | ip-address—
displays statistics for the specified IP interface
Output
The following output is an example of DHCP statistics information, and Table 12 describes the output fields.
Sample Output
A:ALA-1# show router dhcp6 statistics
==========================================================================
DHCP6 statistics (Router: Base)
==========================================================================
Msg-type Rx Tx Dropped
--------------------------------------------------------------------------
1 SOLICIT 0 0 0
2 ADVERTISE 0 0 0
3 REQUEST 0 0 0
4 CONFIRM 0 0 0
5 RENEW 0 0 0
6 REBIND 0 0 0
7 REPLY 0 0 0
8 RELEASE 0 0 0
9 DECLINE 0 0 0
10 RECONFIGURE 0 0 0
11 INFO_REQUEST 0 0 0
12 RELAY_FORW 0 0 0
13 RELAY_REPLY 0 0 0
--------------------------------------------------------------------------
Dhcp6 Drop Reason Counters :
--------------------------------------------------------------------------
1 Dhcp6 oper state is not Up on src itf 0
2 Dhcp6 oper state is not Up on dst itf 0
3 Relay Reply Msg on Client Itf 0
4 Hop Count Limit reached 0
5 Missing Relay Msg option, or illegal msg type 0
6 Unable to determine destination client Itf 0
7 Out of Memory 0
8 No global Pfx on Client Itf 0
9 Unable to determine src Ip Addr 0
10 No route to server 0
11 Subscr. Mgmt. Update failed 0
12 Received Relay Forw Message 0
13 Packet too small to contain valid dhcp6 msg 0
14 Server cannot respond to this message 0
15 No Server Id option in msg from server 0
16 Missing or illegal Client Id option in client msg 0
17 Server Id option in client msg 0
18 Server DUID in client msg does not match our own 0
19 Client sent message to unicast while not allowed 0
20 Client sent message with illegal src Ip address 0
21 Client message type not supported in pfx delegation 0
22 Nbr of addrs or pfxs exceeds allowed max (128) in msg 0
23 Unable to resolve client's mac address 0
24 The Client was assigned an illegal address 0
25 Illegal msg encoding 0
==========================================================================
A:ALA-1#
Table 12: DHCP Statistics Fields
Label | Description |
Received Packets | The number of packets received from the DHCP clients. |
Transmitted Packets | The number of packets transmitted to the DHCP clients. |
Received Malformed Packets | The number of malformed packets received from the DHCP clients. |
Received Untrusted Packets | The number of untrusted packets received from the DHCP clients. |
Client Packets Discarded | The number of packets received from the DHCP clients that were discarded. |
Client Packets Relayed | The number of packets received from the DHCP clients that were forwarded. |
Client Packets Snooped | The number of packets received from the DHCP clients that were snooped. |
Server Packets Discarded | The number of packets received from the DHCP server that were discarded. |
Server Packets Relayed | The number of packets received from the DHCP server that were forwarded. |
Server Packets Snooped | The number of packets received from the DHCP server that were snooped. |
summary
Syntax
summary
Context
show>router>dhcp
Description
Display the status of the DHCP Relay and DHCP Snooping functions on each interface.
Output
The following output is an example of DHCP summary information, and Table 13 describes the output fields for DHCP summary.
Sample Output
A:ALA-1# show router dhcp summary
===============================================================================
DHCP6 Summary (Router: Base)
===============================================================================
Interface Name Nbr Used/Max Relay Admin Oper Relay
SapId Resol. Used/Max Server Admin Oper Server
-------------------------------------------------------------------------------
interfaceServiceDefault No 0/0 Up NoServerCo*
sap:1/2/12:1 0/8000 Up Up
interfaceService No 0/0 Down Down
sap:1/2/1 0/8000 Down Down
interfaceServiceNonDefault No 0/0 Up NoServerCo*
sap:1/2/12:2 0/8000 Down Down
ip-61.4.113.4 Yes 575/8000 Up Up
sap:1/1/1:1 580/8000 Up Up
=============================================================================
A:ALA-1#
Table 13: DHCP Summary Field Descriptions
Label | Description |
Interface Name | Name of the router interface. |
Info Option | Indicates whether Option 82 processing is enabled on the interface. |
Auto Filter | Indicates whether IP Auto Filter is enabled on the interface. |
Snoop | Indicates whether Auto ARP table population is enabled on the interface. |
Interfaces | Indicates the total number of router interfaces on the router. |
ecmp
Syntax
ecmp
Context
show>router
Description
This command displays the ECMP settings for the router.
Output
The following output is an example of ECMP settings information, and Table 14 describes the output fields for the router ECMP settings.
Sample Output
A:ALA-A# show router ecmp
===============================================================================
Router ECMP
===============================================================================
Instance Router Name ECMP Configured-ECMP-Routes
-------------------------------------------------------------------------------
1 Base True 8
===============================================================================
A:ALA-A#
*A:Dut-C# show router ecmp
===============================================================================
Router ECMP
===============================================================================
Instance Router Name ECMP Max-ECMP- Weight ECMP
Rtes
-------------------------------------------------------------------------------
1 Base True 32 True
===============================================================================
Table 14: ECMP Fields
Label | Description |
Instance | The router instance number. |
Router Name | The name of the router instance. |
ECMP | False ECMP is disabled for the instance. |
True ECMP is enabled for the instance. | |
Configured-ECMP-Routes | The number of ECMP routes configured for path sharing. |
fib
Syntax
fib slot-number [family] [ip-prefix/prefix-length] [longer] [secondary] [exclude-services]
fib slot-number [family] summary
fib slot-number nh-table-usage
Context
show>router
Description
This command displays the active FIB entries for a specific IOM or linecard.
Parameters
slot-number—
displays routes only matching the specified chassis slot number
Values—
all IOMs
Values—
1 to 10
family—
displays the router IP interface table to display
Values—
ipv4 — displays only those peers that have the IPv4 family enabled
ipv6 — displays the peers that are IPv6-capable
ip-prefix/prefix-length—
displays FIB entries only matching the specified ip-prefix and length
Values—
The following values apply to the 7450 ESS:
ipv4-prefix: | a.b.c.d (host bits must be 0) |
ipv4-prefix-length: | 0 to 32 |
Values—
The following values apply to the 7750 SR and 7950 XRS:
ipv4-prefix: | a.b.c.d (host bits must be 0) |
ipv4-prefix-length: | 0 to 32 |
ipv6-prefix: | x:x:x:x:x:x:x:x (eight 16-bit pieces) |
x:x:x:x:x:x:d.d.d.d | |
x: [0 to FFFF]H | |
d: [0 to 255]D | |
ipv6-prefix-length: | 0 to 128 |
longer—
displays FIB entries matching the ip-prefix/mask and routes with longer masks
secondary—
displays secondary VRF ID information
summary—
displays summary FIB information for the specified slot number
nh-table-usage—
displays next-hop table usage
Output
The following output is an example of FIB information.
Sample Output
show router fib 1 131.132.133.134/32
========================================================================
FIB Display
========================================================================
Prefix Protocol
NextHop
------------------------------------------------------------------------
131.132.133.134/32 OSPF
66.66.66.66 (loop7)
Next-hop type: tunneled, Owner: RSVP, Tunnel-ID: <out-ifindex-from-route>
------------------------------------------------------------------------
Total Entries : 1
------------------------------------------------------------------------
========================================================================
*A:Dut-C# show router fib 1 1.1.1.1/32
===============================================================================
FIB Display
===============================================================================
Prefix Protocol
NextHop
-------------------------------------------------------------------------------
1.1.1.1/32 BGP
10.20.1.1 (Transport:RSVP LSP:1)
-------------------------------------------------------------------------------
Total Entries : 1
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-C# show router fib 1
===============================================================================
FIB Display
===============================================================================
Prefix Protocol
NextHop
-------------------------------------------------------------------------------
1.1.2.0/24 ISIS
1.1.3.1 (to_Dut-A)
1.2.3.2 (to_Dut-B)
1.1.3.0/24 LOCAL
1.1.3.0 (to_Dut-A)
1.1.9.0/24 ISIS
1.1.3.1 (to_Dut-A)
1.2.3.0/24 LOCAL
1.2.3.0 (to_Dut-B)
1.2.9.0/24 ISIS
1.2.3.2 (to_Dut-B)
10.12.0.0/24 LOCAL
10.12.0.0 (itfToArborCP_02)
10.20.1.1/32 ISIS
1.1.3.1 (to_Dut-A)
10.20.1.2/32 ISIS
1.2.3.2 (to_Dut-B)
10.20.1.3/32 LOCAL
10.20.1.3 (system)
20.12.0.43/32 STATIC
vprn1:mda-1-1
20.12.0.44/32 STATIC
vprn1:mda-2-1
20.12.0.45/32 STATIC
vprn1:mda-2-2
20.12.0.46/32 STATIC
vprn1:mda-3-1
100.0.0.1/32 TMS
vprn1:mda-1-1
vprn1:mda-3-1
138.203.71.202/32 STATIC
10.12.0.2 (itfToArborCP_02)
-------------------------------------------------------------------------------
Total Entries : 15
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-C>config>router>mpls>lsp# show router fib 1 5.3.0.1/32 extensive
===============================================================================
FIB Display (Router: Base)
===============================================================================
Dest Prefix : 5.3.0.1/32
Protocol : BGP
Indirect Next-Hop : 10.0.0.1
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 1
Resolving Next-Hop : 1.0.0.2 (RSVP tunnel:115)
ECMP-Weight : 1
Resolving Next-Hop : 1.0.0.2 (RSVP tunnel:61443)
ECMP-Weight : 1
Indirect Next-Hop : 10.0.0.2
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 30
Resolving Next-Hop : 1.0.0.3 (RSVP tunnel:94)
ECMP-Weight : 20
Resolving Next-Hop : 1.0.0.3 (RSVP tunnel:61442)
ECMP-Weight : 1
===============================================================================
Total Entries : 1
===============================================================================
*A:Dut-C> show router fib 1 10.0.0.2/32 extensive
===============================================================================
FIB Display (Router: Base)
===============================================================================
Dest Prefix : 10.0.0.2/32
Protocol : OSPF
Next-Hop : 1.0.0.3 (RSVP tunnel:94)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 20
Next-Hop : 1.0.0.3 (RSVP tunnel:61442)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 1
===============================================================================
Total Entries : 1
===============================================================================
*A:Dut-C> show router route-table 10.1.0.5/32 extensive
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix : 10.1.0.5/32
Protocol : STATIC
Age : 00h01m37s
Preference : 5
Next-Hop : 1.0.0.2 (RSVP tunnel:128)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
Metric : 1
ECMP-Weight : 10
Next-Hop : 1.0.0.2 (RSVP tunnel:132)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
Metric : 1
ECMP-Weight : 1
-------------------------------------------------------------------------------
No. of Destinations: 1
===============================================================================
*A:Dut-C> show router fib 1 10.1.0.5/32 extensive
===============================================================================
FIB Display (Router: Base)
===============================================================================
Dest Prefix : 10.1.0.5/32
Protocol : STATIC
Next-Hop : 1.0.0.2 (RSVP tunnel:128)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 10
Next-Hop : 1.0.0.2 (RSVP tunnel:132)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 1
===============================================================================
Total Entries : 1
===============================================================================
*A:Dut-B# show router fib 1 10.15.1.0/24
===============================================================================
FIB Display
===============================================================================
Prefix [Flags] Protocol
NextHop
-------------------------------------------------------------------------------
10.15.1.0/24 BGP
10.20.1.3 (Transport:SR)
-------------------------------------------------------------------------------
Total Entries : 1
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-B# show router fib 1 10.15.1.0/24 extensive
===============================================================================
FIB Display (Router: Base)
===============================================================================
Dest Prefix : 10.15.1.0/24
Protocol : BGP
Installed : Y
Indirect Next-Hop : 10.20.1.3
Label : 262123
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
ECMP-Weight : 1
Resolving Next-Hop : 10.20.1.3 (SR tunnel)
ECMP-Weight : 1
===============================================================================
Total Entries : 1
===============================================================================
fp-tunnel-table
Syntax
fp-tunnel-table slot-number [ip-prefix/prefix-length]
Context
show>router
Description
This command displays the IOM/IMM label, next-hop and outgoing interface information for BGP, LDP and RSVP tunnels used in any of the following applications:
- BGP shortcut (configure>router>bgp>next-hop-resolution>shortcut-tunnel)
- IGP shortcut (config>router>isis[ospf]>rsvp-shortcut)
- IGP prefix resolved to an LDP LSP (config>router>ldp-shortcut)
- Static route resolved to a LDP or RSVP LSP
- VPRN auto-bind
- 6PE/6VPE.
Parameters
slot-number—
displays information for the specified slot
Values—
1 to 10
ip-prefix[/prefix-length]—
displays routes only matching the specified ip-address and length
Values—
ipv4-prefix: | a.b.c.d (host bits must be set to 0) | |
ipv4-prefix-length: | 0 to 32 | |
ipv6 | ipv6-prefix[/pref*: | x:x:x:x:x:x:x:x (eight 16-bit pieces) |
x:x:x:x:x:x:d.d.d.d | ||
x: [0 to FFFF]H | ||
d: [0 to 255]D | ||
prefix-length: | 1 to 128 |
Output
The following output is an example of router FP tunnel information.
Sample Output
*A:Dut-B# show router fp-tunnel-table 1 10.20.1.3/32
===============================================================================
Tunnel Table Display
Legend:
B - FRR Backup
===============================================================================
Destination Protocol Tunnel-ID
Lbl NextHop Intf/Tunnel
-------------------------------------------------------------------------------
10.20.1.3/32 LDP -
262137 10.2.1.3 1/1/3:1
10.20.1.3/32 RSVP 1
262133 10.2.1.3 1/1/3:1
10.20.1.3/32 SR-ISIS-0 -
18602 10.2.1.3 1/1/3:1
10.20.1.3/32 SR-OSPF-0 -
19102 10.2.1.3 1/1/3:1
-------------------------------------------------------------------------------
Total Entries : 4
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-B#
*A:Dut-C# show router fp-tunnel-table 1
===============================================================================
Tunnel Table Display
Legend:
B - FRR Backup
===============================================================================
Destination Protocol Tunnel-ID
Lbl NextHop Intf/Tunnel
-------------------------------------------------------------------------------
4.0.0.1/32 SR-ISIS-0 -
20001 1.3.4.4 2/1/3:1
20001/21005 1.2.3.2(B) 1/1/2
10.20.1.2/32 SR-ISIS-0 -
21002 1.2.3.2 1/1/2
21002/21005 1.3.4.4(B) 2/1/3:1
10.20.1.4/32 SR-ISIS-0 -
21004 1.3.4.4 2/1/3:1
21004/21005 1.2.3.2(B) 1/1/2
10.20.1.5/32 SR-ISIS-0 -
21005 1.2.3.2 1/1/2
21005 1.3.4.4(B) 2/1/3:1
-------------------------------------------------------------------------------
Total Entries : 4
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-C#
*A:Dut-C# show router fp-tunnel-table 1
===============================================================================
Tunnel Table Display
Legend:
B - FRR Backup
===============================================================================
Destination Protocol Tunnel-ID
Lbl NextHop Intf/Tunnel
-------------------------------------------------------------------------------
1.1.3.1/32 SR -
3 1.1.3.1 1/1/1
1.2.3.2/32 SR -
3 1.2.3.2 1/1/2:1
1.3.5.5/32 SR -
3 1.3.5.5 2/1/1
2.2.3.2/32 SR -
3 2.2.3.2 1/1/2:2
10.20.1.1/32 SR-OSPF-0 -
21011 1.1.3.1 1/1/1
22011 1.2.3.2(B) 1/1/2:1
10.20.1.2/32 SR-OSPF-0 -
22022 2.2.3.2 1/1/2:2
24022/25044 1.3.5.5(B) 2/1/1
10.20.1.4/32 SR-OSPF-0 -
25044 1.3.5.5 2/1/1
22044 2.2.3.2 1/1/2:2
10.20.1.5/32 SR-OSPF-0 -
25055 1.3.5.5 2/1/1
24055/22044 2.2.3.2(B) 1/1/2:2
10.20.1.6/32 SR-OSPF-0 -
25066 1.3.5.5 2/1/1
24066/22044 2.2.3.2(B) 1/1/2:2
-------------------------------------------------------------------------------
Total Entries : 9
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-C#
*A:Dut-F# show router fp-tunnel-table 1
===============================================================================
Tunnel Table Display
Legend:
B - FRR Backup
===============================================================================
Destination Protocol Tunnel-ID
Lbl NextHop Intf/Tunnel
-------------------------------------------------------------------------------
1.0.11.1/32 SR-OSPF-0 -
30004 1.0.26.2 1/1/3:1
40004 1.0.36.3(B) 1/1/4:1
1.0.22.2/32 SR-OSPF-0 -
30005 1.0.26.2 1/1/3:1
20005/40004 1.0.36.3(B) 1/1/4:1
1.0.26.2/32 SR -
3 1.0.26.2 1/1/3:1
50011/60001 1.0.56.5(B) 1/1/2:1
1.0.26.2/32 SR -
3 1.0.26.2 1/1/3:1
20005/40004 1.0.36.3(B) 1/1/4:1
1.0.33.3/32 SR-OSPF-0 -
40000 1.0.36.3 1/1/4:1
30998 1.0.26.2(B) 1/1/3:1
1.0.36.3/32 SR -
3 1.0.36.3 1/1/4:1
1.0.44.4/32 SR-OSPF-0 -
30001 1.0.26.2 1/1/3:1
60001 1.0.56.5(B) 1/1/2:1
1.0.55.5/32 SR-OSPF-0 -
60002 1.0.56.5 1/1/2:1
30995 1.0.26.2(B) 1/1/3:1
1.0.56.5/32 SR -
3 1.0.56.5 1/1/2:1
10.20.1.1/32 SR-OSPF-0 -
30010 1.0.26.2 1/1/3:1
40010 1.0.36.3(B) 1/1/4:1
10.20.1.2/32 SR-OSPF-0 -
30011 1.0.26.2 1/1/3:1
50011/60001 1.0.56.5(B) 1/1/2:1
10.20.1.3/32 SR-OSPF-0 -
40006 1.0.36.3 1/1/4:1
20006/30004 1.0.26.2(B) 1/1/3:1
10.20.1.4/32 SR-OSPF-0 -
30007 1.0.26.2 1/1/3:1
60007 1.0.56.5(B) 1/1/2:1
10.20.1.5/32 SR-OSPF-0 -
60008 1.0.56.5 1/1/2:1
50008/30001 1.0.26.2(B) 1/1/3:1
-------------------------------------------------------------------------------
Total Entries : 14
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-F#
*A:Dut-C# show router fp-tunnel-table 1 10.20.1.5/32
===============================================================================
Tunnel Table Display
Legend:
B - FRR Backup
===============================================================================
Destination Protocol Tunnel-ID
Lbl NextHop Intf/Tunnel
-------------------------------------------------------------------------------
10.20.1.5/32 LDP -
262135 10.10.5.5 2/1/1
3 10.20.1.5(B) SR
10.20.1.5/32 SR-ISIS-0 -
474390 10.10.5.5 2/1/1
474390/474389 10.10.12.2(B) lag-1
-------------------------------------------------------------------------------
Total Entries : 2
-------------------------------------------------------------------------------
===============================================================================
icmp
Syntax
icmp [interface interface-name]
Context
show>router
Description
This command displays Internet Control Message Protocol version 4 (ICMP) statistics. ICMP generates error messages (for example, ICMP destination unreachable messages) to report errors during processing and other diagnostic functions.
Parameters
interface-name —
specifies an existing IP interface name.
Values—
up to 32 characters
Output
The following output is an example of router ICMP statistics, and Table 15 describes the fields.
Sample Output
*A:cses-V93# show router icmp
===============================================================================
Global ICMP Stats
===============================================================================
Received
Total : 0 Error : 0
Destination Unreachable : 0 Redirect : 0
Echo Request : 0 Echo Reply : 0
TTL Expired : 0 Source Quench : 0
Timestamp Request : 0 Timestamp Reply : 0
Address Mask Request : 0 Address Mask Reply : 0
Parameter Problem : 0
-------------------------------------------------------------------------------
Sent
Total : 0 Error : 0
Destination Unreachable : 0 Redirect : 0
Echo Request : 0 Echo Reply : 0
TTL Expired : 0 Source Quench : 0
Timestamp Request : 0 Timestamp Reply : 0
Address Mask Request : 0 Address Mask Reply : 0
Parameter Problem : 0
===============================================================================
*A:cses-V93# show router icmp interface "foo"
===============================================================================
Interface ICMP Stats
===============================================================================
Interface "foo"
-------------------------------------------------------------------------------
Received
Total : 0 Error : 0
Destination Unreachable : 0 Redirect : 0
Echo Request : 0 Echo Reply : 0
TTL Expired : 0 Source Quench : 0
Timestamp Request : 0 Timestamp Reply : 0
Address Mask Request : 0 Address Mask Reply : 0
Parameter Problem : 0
-------------------------------------------------------------------------------
Sent
Total : 0 Error : 0
Destination Unreachable : 0 Redirect : 0
Echo Request : 0 Echo Reply : 0
TTL Expired : 0 Source Quench : 0
Timestamp Request : 0 Timestamp Reply : 0
Address Mask Request : 0 Address Mask Reply : 0
Parameter Problem : 0
===============================================================================
Table 15: ICMP Fields
Label | Description |
Total | The total number of all messages. |
Error | The number of error messages. |
Destination Unreachable | The number of message that did not reach the destination. |
Redirect | The number of packet redirects. |
Echo Request | The number of echo requests. |
Echo Reply | The number of echo replies. |
TTL Expired | The number of messages that exceeded the time to live threshold. |
Source Quench | The number of source quench requests (deprecated). |
Timestamp Request | The number of timestamp requests. |
Timestamp Reply | The number of timestamp replies. |
Address Mask Request | The number of address mask requests (deprecated). |
Address Mask Reply | The number of address mask replies (deprecated). |
Parameter Problem | The number of packets with a parameter problem in the IP header. |
icmp6
Syntax
icmp6 [interface interface-name]
Context
show>router
Description
This command displays Internet Control Message Protocol Version 6 (ICMPv6) statistics. ICMP generates error messages (for example, ICMP destination unreachable messages) to report errors during processing and other diagnostic functions. ICMPv6 packets can be used in the neighbor discovery protocol and path MTU discovery.
Parameters
interface-name —
specifies an existing IP interface name.
Values—
up to 32 characters
Output
The following output is an example of router ICMPv6 statistics, and Table 16 describes the fields.
Sample Output
A:SR-3# show router icmp6
===============================================================================
Global ICMPv6 Stats
===============================================================================
Received
Total : 0 Errors : 0
Destination Unreachable : 0 Redirects : 0
Time Exceeded : 0 Pkt Too Big : 0
Echo Request : 0 Echo Reply : 0
Router Solicits : 0 Router Advertisements : 0
Neighbor Solicits : 0 Neighbor Advertisements : 0
Parameter Problem : 0
-------------------------------------------------------------------------------
Sent
Total : 2 Errors : 0
Destination Unreachable : 0 Redirects : 0
Time Exceeded : 0 Pkt Too Big : 0
Echo Request : 0 Echo Reply : 0
Router Solicits : 0 Router Advertisements : 0
Neighbor Solicits : 2 Neighbor Advertisements : 0
Parameter Problem : 0
===============================================================================
A:SR-3#
A:SR-3# show router icmp6 interface "foo"
===============================================================================
Interface ICMPv6 Stats
===============================================================================
===============================================================================
Interface "foo"
-------------------------------------------------------------------------------
Received
Total : 0 Errors : 0
Destination Unreachable : 0 Redirects : 0
Time Exceeded : 0 Pkt Too Big : 0
Echo Request : 0 Echo Reply : 0
Router Solicits : 0 Router Advertisements : 0
Neighbor Solicits : 0 Neighbor Advertisements : 0
Parameter Problem : 0
-------------------------------------------------------------------------------
Sent
Total : 2 Errors : 0
Destination Unreachable : 0 Redirects : 0
Time Exceeded : 0 Pkt Too Big : 0
Echo Request : 0 Echo Reply : 0
Router Solicits : 0 Router Advertisements : 0
Neighbor Solicits : 2 Neighbor Advertisements : 0
Parameter Problem : 0
===============================================================================
A:SR-3#
Table 16: ICMPv6 Fields
Label | Description |
Total | The total number of all messages. |
Destination Unreachable | The number of message that did not reach the destination. |
Time Exceeded | The number of messages that exceeded the time threshold. |
Echo Request | The number of echo requests. |
Router Solicits | The number of times the local router was solicited. |
Neighbor Solicits | The number of times the neighbor router was solicited. |
Errors | The number of error messages. |
Redirects | The number of packet redirects. |
Pkt Too big | The number of packets that exceed appropriate size. |
Echo Reply | The number of echo replies. |
Router Advertisements | The number of times the router advertised its location. |
Neighbor Advertisements | The number of times the neighbor router advertised its location. |
Parameter Problem | The number of packets with a parameter problem in the IP header. |
if-attribute
Syntax
if-attribute
Context
show>router
Description
This command enables the context to display interface attribute related information.
srlg-group
Syntax
srlg-group [name]
Context
show>router>if-attribute>srlg-group
Description
This command displays SRLG statistics.
Parameters
name—
only displays entries associated with the specified SRLG name
Output
The following output is an example of SRLG statistics, and Table 17 describes the fields.
Sample Output
B:CORE2# show router if-attribute srlg-group
==================================================
Interface Srlg Groups
==================================================
Group Name Group Value Penalty Weight
--------------------------------------------------
1 1 100
2 2 200
3 3 300
--------------------------------------------------
No. of Groups: 3
==================================================
B:CORE2#
Table 17: SRLG Fields
Label | Description |
Group Name | The name of the SRLG. |
Group Value | The integer value of the SRLG. |
Penalty Weight | The penalty weight that is assigned to the SRLG. |
No. of Groups | The total number of displayed SRLGs. |
interface
Syntax
interface [interface-name]
Context
show>router>icmpv6
Description
This command displays interface ICMPv6 statistics.
Parameters
interface-name—
only displays entries associated with the specified IP interface name
Output
The following output is an example of ICMPv6 interface statistics, and Table 18 describes the fields.
Sample Output
B:CORE2# show router icmp6 interface net1_1_2
===============================================================================
Interface ICMPv6 Stats
===============================================================================
Interface "net1_1_2"
-------------------------------------------------------------------------------
Received
Total : 41 Errors : 0
Destination Unreachable : 0 Redirects : 0
Time Exceeded : 0 Pkt Too Big : 0
Echo Request : 0 Echo Reply : 0
Router Solicits : 0 Router Advertisements : 0
Neighbor Solicits : 20 Neighbor Advertisements : 21
-------------------------------------------------------------------------------
Sent
Total : 47 Errors : 0
Destination Unreachable : 0 Redirects : 0
Time Exceeded : 0 Pkt Too Big : 0
Echo Request : 0 Echo Reply : 0
Router Solicits : 0 Router Advertisements : 0
Neighbor Solicits : 27 Neighbor Advertisements : 20
===============================================================================
B:CORE2#
Table 18: ICMP6 Interface Fields
Label | Description |
Total | The total number of all messages. |
Destination Unreachable | The number of message that did not reach the destination. |
Time Exceeded | The number of messages that exceeded the time threshold. |
Echo Request | The number of echo requests. |
Router Solicits | The number of times the local router was solicited. |
Neighbor Solicits | The number of times the neighbor router was solicited. |
Errors | The number of error messages. |
Redirects | The number of packet redirects. |
Pkt Too big | The number of packets that exceed appropriate size. |
Echo Reply | The number of echo replies. |
Router Advertisements | The number of times the router advertised its location. |
Neighbor Advertisements | The number of times the neighbor router advertised its location. |
interface
Syntax
interface {{ip-address | ip-int-name} [detail] [family] | summary | exclude-services}
interface {ip-address | ip-int-name} eth-cfm [detail]
interface {ip-address | ip-int-name} mac [ieee-address]
interface {ip-address | ip-int-name} statistics
interface {ip-address | ip-int-name} dist-cpu-protection [detail]
interface {ip-address | ip-int-name} policy-accounting [class [index]]
Context
show>router
Description
This command displays the router IP interface table sorted by interface index.
Parameters
ip-address—
displays the interface information associated with the specified IP address
Values—
ipv4-address | a.b.c.d (host bits must be 0) | |
ipv6-address | x:x:x:x:x:x:x:x (eight 16-bit pieces) | |
x:x:x:x:x:x:d.d.d.d | ||
x: [0 to FFFF]H | ||
d: [0 to 255]D |
ip-int-name—
displays the interface information associated with the specified IP interface name. The name can be up to 32 characters in length.
summary—
displays summary IP interface information for the router
detail—
displays detailed IP interface information
exclude-services—
displays IP interface information, excluding IP interfaces configured for customer services. Only core network IP interfaces are displayed.
family—
specifies the router IP interface family to display
Values—
ipv4 — displays only those peers that have the IPv4 family enabled
Values—
ipv6 — displays the peers that are IPv6-capable
eth-cfm—
displays Ethernet CFM information
mac—
displays information associated with the MAC address
ieee-address—
displays the information associated with the specified IEEE address. The address is in the xx-xx-xx-xx-xx-xx or xx:xx:xx:xx:xx:xx format.
dist-cpu-protection—
displays the Distributed CPU Protection parameters and status at the interface level
class—
indicates whether to display accounting policy statistics for the source or destination class
Values—
source-class, dest-class
index—
specifies an integer value for the accounting source or destination class index
Values—
1 to 255
statistics—
displays packet statistics for an interface on the router
 | Note: The show router interface statistics command also shows the MPLS statistics that are shown in using the show router mpls interface statistics command. This allows the operator to see MPLS statistics from interfaces that are not added to MPLS, such as a carrier's network interfaces. Sample Output for an example of the MPLS fields that are displayed. These fields are displayed regardless of the state of MPLS. |
Output
Standard IP Interface Output—The following output is an example of standard IP interface information, and Table 19 describes the fields.
Sample Output
*A:mlstp-dutA# show router interface "AtoB_1"
===============================================================================
Interface Table (Router: Base)
===============================================================================
Interface-Name Adm Opr(v4/v6) Mode Port/SapId
IP-Address PfxState
-------------------------------------------------------------------------------
AtoB_1 Down Down/-- Network 1/2/3:1
Unnumbered If[system] n/a
-------------------------------------------------------------------------------
Interfaces : 1
A:ALA-A# show router interface
===============================================================================
Interface Table (Router: Base)
===============================================================================
Interface-Name Adm(v4/v6) Opr(v4/v6) Mode Port/SapId
IP-Address PfxState
-------------------------------------------------------------------------------
ip-100.0.0.2 Up/Up Up/Up Network lag-1
100.0.0.2/10 n/a
3FFE:1::2/64 PREFERRED
FE80::200:FF:FE00:4/64 PREFERRED
ip-100.128.0.2 Up/Up Up/Up Network lag-2
100.128.0.2/10 n/a
3FFE:2::2/64 PREFERRED
FE80::200:FF:FE00:4/64 PREFERRED
ip-24.2.4.4 Up/Up Up/Up Network 6/2/14
24.2.4.4/24 n/a
3FFE::1802:404/120 PREFERRED
FE80::200:FF:FE00:4/64 PREFERRED
system Up/Up Up/Up Network system
200.200.200.4/32 n/a
3FFE::C8C8:C804/128 PREFERRED
-------------------------------------------------------------------------------
Interfaces : 4
===============================================================================
A:ALA-A#
A:ALA-A# show router interface 10.10.0.3/32
===============================================================================
Interface Table
===============================================================================
Interface-Name Type IP-Address Adm Opr Mode
-------------------------------------------------------------------------------
system Pri 10.10.0.3/32 Up Up Network
===============================================================================
A:ALA-A#
*A:Dut-C# show router 1 interface
===============================================================================
Interface Table (Service: 1)
===============================================================================
Interface-Name Adm Opr(v4/v6) Mode Port/SapId
IP-Address PfxState
-------------------------------------------------------------------------------
mda-1-1 Up Up/Down TMS 1/1
20.12.0.43/32 n/a
mda-2-1 Up Up/Down TMS 2/1
20.12.0.44/32 n/a
mda-2-2 Up Up/Down TMS 2/2
20.12.0.45/32 n/a
mda-3-1 Up Up/Down TMS 3/1
20.12.0.46/32 n/a
-------------------------------------------------------------------------------
Interfaces : 4
===============================================================================
A:ALA-A# show router interface to-ser1
===============================================================================
Interface Table
===============================================================================
Interface-Name Type IP-Address Adm Opr Mode
-------------------------------------------------------------------------------
to-ser1 Pri 10.10.13.3/24 Up Up Network
===============================================================================
A:ALA-A# show router interface exclude-services
===============================================================================
Interface Table
===============================================================================
Interface-Name Type IP-Address Adm Opr Mode
-------------------------------------------------------------------------------
system Pri 10.10.0.3/32 Up Up Network
to-ser1 Pri 10.10.13.3/24 Up Up Network
to-ser4 Pri 10.10.34.3/24 Up Up Network
to-ser5 Pri 10.10.35.3/24 Up Up Network
to-ser6 n/a n/a Up Down Network
management Pri 192.168.2.93/20 Up Up Network
===============================================================================
A:ALA-A#
Table 19: Standard IP Interface Field Descriptions
Label | Description |
Interface-Name | The IP interface name. |
Type | n/a — No IP address has been assigned to the IP interface, so the IP address type is not applicable. Pri — The IP address for the IP interface is the Primary address on the IP interface. Sec — The IP address for the IP interface is a secondary address on the IP interface. |
IP-Address | The IP address and subnet mask length of the IP interface. n/a — Indicates no IP address has been assigned to the IP interface. |
Adm | Down — The IP interface is administratively disabled. Up — The IP interface is administratively enabled. |
Opr | Down — The IP interface is operationally disabled. Up — The IP interface is operationally disabled. |
Mode | Network — The IP interface is a network/core IP interface. Service — The IP interface is a service IP interface. |
Port/SAP Id | The physical network port or the SAP identifier associated with the IP interface. |
Detailed IP Interface Output — The following output is an example of detailed IP interface information, and Table 20 describes the fields.
Sample Output
*A:Dut-C# show service id 10 interface "foo" detail
===============================================================================
Interface Table
===============================================================================
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name : foo
Admin State : Up Oper (v4/v6) : Up/Up
Protocols : None
IP Addr/mask : 1.2.3.3/24 Address Type : Primary
IGP Inhibit : Disabled Broadcast Address : Host-ones
HoldUp-Time : 0 Track Srrp Inst : 0
IPv6 Address : 3ffe::102:303/120
IPv6 Addr State : PREFERRED
CGA modifier : (Not Specified)
HoldUp-Time : 0 Track Srrp Inst : 0
Link Lcl Address : fe80::200:ff:fe00:3/64
Link Lcl State : PREFERRED
Ignore Port State: None
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Description : (Not Specified)
If Index : 29 Virt. If Index : 29
Last Oper Chg : 06/07/2016 15:02:00 Global If Index : 365
Mon Oper Grp : None
Srrp En Rtng : Disabled Hold time : N/A
SAP Id : 2/1/1:10
TOS Marking : Trusted If Type : VPRN
SNTP B.Cast : False
MAC Address : 00:00:00:00:00:03 Mac Accounting : Disabled
Ingress stats : Disabled IPv6 DAD : Enabled
TCP MSS V4 : 0 TCP MSS V6 : 0
ARP Timeout : 14400s IPv6 Nbr ReachTime: 30s
ARP Retry Timer : 5000ms IPv6 stale time : 14400s
ARP Limit : Disabled IPv6 Nbr Limit : Disabled
ARP Threshold : Disabled IPv6 Nbr Threshold: Disabled
ARP Limit Log On*: Disabled IPv6 Nbr Log Only : Disabled
IP MTU : (default)
IP Oper MTU : 1500
ARP Populate : Disabled Host Conn Verify : Disabled
SHCV pol IPv4 : None
Cflowd (unicast) : None Cflowd (multicast): None
LdpSyncTimer : None
LSR Load Balance : system
EGR Load Balance : both
Vas If Type : none
TEID Load Balance: Disabled
SPI Load Balance : Disabled
uRPF Chk : disabled
uRPF Ipv6 Chk : disabled
PTP HW Assist : Disabled
Rx Pkts : 87 Rx Bytes : 6216
Rx V4 Pkts : N/A Rx V4 Bytes : N/A
Rx V6 Pkts : N/A Rx V6 Bytes : N/A
Tx Pkts : 42 Tx Bytes : 3612
Tx V4 Pkts : 0 Tx V4 Bytes : 0
Tx V4 Discard Pk*: 0 Tx V4 Discard Byt*: 0
Tx V6 Pkts : 42 Tx V6 Bytes : 3612
Tx V6 Discard Pk*: 0 Tx V6 Discard Byt*: 0
Mpls Rx Pkts : 0 Mpls Rx Bytes : 0
Mpls Tx Pkts : 0 Mpls Tx Bytes : 0
Proxy ARP Details
Rem Proxy ARP : Disabled Local Proxy ARP : Disabled
Policies : none
Proxy Neighbor Discovery Details
Local Pxy ND : Disabled
Policies : none
Secure ND Details
Secure ND : Disabled
DHCP no local server
DHCP Details
Description : (Not Specified)
Admin State : Down Lease Populate : 0
Gi-Addr : 1.2.3.3* Gi-Addr as Src Ip : Disabled
* = inferred gi-address from interface IP address
Action : Keep Trusted : Disabled
DHCP Proxy Details
Admin State : Down
Lease Time : N/A
Emul. Server : Not configured
Subscriber Authentication Details
Auth Policy : None
DHCP6 Relay Details
Description : (Not Specified)
Admin State : Down Lease Populate : 0
Oper State : Down Nbr Resolution : Disabled
If-Id Option : None Remote Id : Disabled
Src Addr : Not configured
Python plcy : (Not Specified)
DHCP6 Server Details
Admin State : Down Max. Lease States : 8000
ISA Tunnel redundant next-hop information
Static Next-Hop :
Dynamic Next-Hop :
ICMP Details
Redirects : Number - 100 Time (seconds) - 10
Unreachables : Number - 100 Time (seconds) - 10
TTL Expired : Number - 100 Time (seconds) - 10
Parameter Problem: Number - 100 Time (seconds) - 10
ICMP Mask Reply : True
ICMPv6 Details
Packet Too Big : Number - 100 Time (seconds) - 10
Parameter Problem: Number - 100 Time (seconds) - 10
Redirects : Number - 100 Time (seconds) - 10
Time Exceeded : Number - 100 Time (seconds) - 10
Unreachables : Number - 100 Time (seconds) - 10
IPCP Address Extension Details
Peer IP Addr : Not configured
Peer Pri DNS Addr: Not configured
Peer Sec DNS Addr: Not configured
-------------------------------------------------------------------------------
Admin Groups
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Srlg Groups
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QoS Queue-Group Redirection Details
-------------------------------------------------------------------------------
Ingress FP QGrp : (none) Egress Port QGrp : (none)
Ing FP QGrp Inst : (none) Egr Port QGrp Inst: (none)
-------------------------------------------------------------------------------
Interfaces : 1
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-C#
*A:Dut-C>config>router>mpls# /show router 1 interface "To_B_1" detail
===============================================================================
Interface Table (Service: 1)
===============================================================================
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name : To_B_1
Admin State : Up Oper (v4/v6) : Down/Down
Down Reason Code : assocObjNotReady
Down Reason V4 : assocObjNotReady
Down Reason V6 : assocObjNotReady ifProtoOperDown
Protocols : OSPFv2
IP Addr/mask : 11.11.11.1/24 Address Type : Primary
IGP Inhibit : Disabled Broadcast Address : Host-ones
HoldUp-Time : 0 Track Srrp Inst : 0
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Description : (Not Specified)
If Index : 5 Virt. If Index : 5
Last Oper Chg : 07/21/2016 21:46:23 Global If Index : 258
Mon Oper Grp : None
Srrp En Rtng : Disabled Hold time : N/A
SDP Id : spoke-230:1
Spoke-SDP Details
Admin State : Up Oper State : Down
Hash Label : Disabled Hash Lbl Sig Cap : Disabled
Oper Hash Label : Disabled
Entropy Label : Disabled
Peer Fault Ip : None
Local Pw Bits : pwNotForwarding
Peer Pw Bits : None
Peer Vccv CV Bits : lspPing bfdFaultDet
Peer Vccv CC Bits : mplsRouterAlertLabel
Flags : LabelStackLimitExceeded
TOS Marking : Trusted If Type : VPRN
SNTP B.Cast : False
MAC Address : 0e:86:ff:00:00:00 Mac Accounting : Disabled
Ingress stats : Disabled IPv6 DAD : Enabled
TCP MSS V4 : 0 TCP MSS V6 : 0
ARP Timeout : 14400s IPv6 Nbr ReachTime: 30s
ARP Retry Timer : 5000ms IPv6 stale time : 14400s
ARP Limit : Disabled IPv6 Nbr Limit : Disabled
ARP Threshold : Disabled IPv6 Nbr Threshold: Disabled
ARP Limit Log On*: Disabled IPv6 Nbr Log Only : Disabled
IP MTU : 1500
IP Oper MTU : 0
ARP Populate : Disabled Host Conn Verify : Disabled
SHCV pol IPv4 : None
Cflowd (unicast) : None Cflowd (multicast): None
LdpSyncTimer : None
LSR Load Balance : system
EGR Load Balance : both
Vas If Type : none
TEID Load Balance: Disabled
SPI Load Balance : Disabled
uRPF Chk : disabled
uRPF Ipv6 Chk : disabled
PTP HW Assist : Disabled
Rx Pkts : 0 Rx Bytes : 0
Rx V4 Pkts : N/A Rx V4 Bytes : N/A
Rx V6 Pkts : N/A Rx V6 Bytes : N/A
Tx Pkts : 22 Tx Bytes : 1662
Tx V4 Pkts : 0 Tx V4 Bytes : 0
Tx V4 Discard Pk*: 0 Tx V4 Discard Byt*: 0
Tx V6 Pkts : 0 Tx V6 Bytes : 0
Tx V6 Discard Pk*: 0 Tx V6 Discard Byt*: 0
Mpls Rx Pkts : 0 Mpls Rx Bytes : 0
Mpls Tx Pkts : 0 Mpls Tx Bytes : 0
Proxy ARP Details
Rem Proxy ARP : Disabled Local Proxy ARP : Disabled
Policies : none
Proxy Neighbor Discovery Details
Local Pxy ND : Disabled
Policies : none
DHCP no local server
DHCP Details
Description : (Not Specified)
Admin State : Down Lease Populate : 0
Gi-Addr : 11.11.11.1* Gi-Addr as Src Ip : Disabled
* = inferred gi-address from interface IP address
Action : Keep Trusted : Disabled
DHCP Proxy Details
Admin State : Down
Lease Time : N/A
Emul. Server : Not configured
Subscriber Authentication Details
Auth Policy : None
DHCP6 Relay Details
Description : (Not Specified)
Admin State : Down Lease Populate : 0
Oper State : Down Nbr Resolution : Disabled
If-Id Option : None Remote Id : Disabled
Src Addr : Not configured
Python plcy : (Not Specified)
DHCP6 Server Details
Admin State : Down Max. Lease States : 8000
ISA Tunnel redundant next-hop information
Static Next-Hop :
Dynamic Next-Hop :
ICMP Details
Redirects : Number - 100 Time (seconds) - 10
Unreachables : Number - 100 Time (seconds) - 10
TTL Expired : Number - 100 Time (seconds) - 10
Parameter Problem: Number - 100 Time (seconds) - 10
ICMP Mask Reply : True
ICMPv6 Details
Packet Too Big : Number - 100 Time (seconds) - 10
Parameter Problem: Number - 100 Time (seconds) - 10
Redirects : Number - 100 Time (seconds) - 10
Time Exceeded : Number - 100 Time (seconds) - 10
Unreachables : Number - 100 Time (seconds) - 10
IPCP Address Extension Details
Peer IP Addr : Not configured
Peer Pri DNS Addr: Not configured
Peer Sec DNS Addr: Not configured
-------------------------------------------------------------------------------
Admin Groups
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Srlg Groups
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QoS Queue-Group Redirection Details
-------------------------------------------------------------------------------
Ingress FP QGrp : (none) Egress Port QGrp : (none)
Ing FP QGrp Inst : (none) Egr Port QGrp Inst: (none)
===============================================================================
* indicates that the corresponding row element may have been truncated.
Table 20: Detailed IP Interface Field Descriptions
Label | Description |
If Name | The IP interface name. |
Admin State | Down — The IP interface is administratively disabled. Up — The IP interface is administratively enabled. |
Oper State | Down — The IP interface is operationally disabled. Up — The IP interface is operationally enabled. |
IP Addr/mask | The IP address and subnet mask length of the IP interface. Not Assigned — Indicates no IP address has been assigned to the IP interface. |
IPV6 Addr | The IPv6 address of the interface. |
If Index | The interface index of the IP router interface. |
Virt If Index | The virtual interface index of the IP router interface. |
Last Oper Change | The last change in operational status. |
Global If Index | The global interface index of the IP router interface. |
Sap ID | The SAP identifier. |
TOS Marker | The TOS byte value in the logged packet. |
If Type | Network — The IP interface is a network/core IP interface. Service — The IP interface is a service IP interface. |
SNTP B.cast | Displays if the broadcast-client global parameter is configured. |
IES ID | The IES identifier. |
QoS Policy | The QoS policy ID associated with the IP interface. |
MAC Address | The MAC address of the interface. |
Arp Timeout | The ARP timeout for the interface, in seconds, which is the time an ARP entry is maintained in the ARP cache without being refreshed. |
ICMP Mask Reply | False — The IP interface will not reply to a received ICMP mask request. True — The IP interface will reply to a received ICMP mask request. |
Arp Populate | Displays whether ARP is enabled or disabled. |
Host Conn Verify | The host connectivity verification. |
LdpSyncTimer | Specifies the IGP/LDP sync timer value. |
uRPF Chk | Specifies whether unicast RPF (uRPF) Check is enabled on this interface. |
uRPF Iv6 Chk | Specifies whether unicast RPF (uRPF) Check IPv6 is enabled on this interface. |
PTP HW Assist | Specifies whether the PTP Hardware Assist function is enabled on this interface. |
Cflowd | Specifies the type of Cflowd analysis that is applied to the interface. acl — ACL Cflowd analysis is applied to the interface. interface — Interface Cflowd analysis is applied to the interface. none — No Cflowd analysis is applied to the interface. |
Statistics IP Interface Output — The following output is an example of router IP interface statistics when enable-interface-statistics is enabled, and Table 21 describes the fields.
Sample Output
A:ALA-A# show router interface “to_ixia” statistics
===============================================================================
Interface Statistics
===============================================================================
If Name : to_Ixia
Admin State : Up Oper (v4/v6) : Up/Up
Rx Pkts : 6244 Rx Bytes : 599424
Rx V4 Pkts : 3122 Rx V4 Bytes : 299712
Rx V6 Pkts : 3122 Rx V6 Bytes : 299712
Tx Pkts : 0 Tx Bytes : 0
Tx V4 Pkts : 0 Tx V4 Bytes : 0
Tx V4 Discard Pk*: 0 Tx V4 Discard Byt*: 0
Tx V6 Pkts : 0 Tx V6 Bytes : 0
Tx V6 Discard Pk*: 0 Tx V6 Discard Byt*: 0
uRPF Chk Fail Pk*: 6244 uRPF Fail Bytes : 487032
uRPF Fail V4 Pk : 3122 uRPF Fail V4 Byt : 243516
uRPF Fail V6 Pk : 3122 uRPF Fail V6 Byt : 243516
Mpls Rx Pkts : 0 Mpls Rx Bytes : 0
Mpls Tx Pkts : 0 Mpls Tx Bytes : 0
===============================================================================
Table 21: Statistics IP Interface Fields
Label | Description |
Ifname | The interface name. |
Admin State | The administrative status of the router interface. |
Oper | The operational status of the router instance. |
Summary IP Interface Output — The following output is an example of summary IP information, and Table 22 describes the fields.
Sample Output
A:ALA-A# show router interface summary
===============================================================================
Router Summary (Interfaces)
===============================================================================
Instance Router Name Interfaces Admin-Up Oper-Up
-------------------------------------------------------------------------------
1 Base 7 7 5
===============================================================================
Table 22: Summary IP Interface Fields
Label | Description |
Instance | The router instance number. |
Router Name | The name of the router instance. |
Interfaces | The number of IP interfaces in the router instance. |
Admin-Up | The number of administratively enabled IP interfaces in the router instance. |
Oper-Up | The number of operationally enabled IP interfaces in the router instance. |
routes
Syntax
routes alternative
Context
show:router>isis
Description
This command displays IS-IS route information.
Output
The following output is an example of IS-IS route information.
Sample Output
*A:SRR# show router isis routes 1.1.1.0/24
===============================================================================
Route Table
===============================================================================
Prefix[Flags] Metric Lvl/Typ Ver. SysID/Hostname
NextHop MT AdminTag
-------------------------------------------------------------------------------
1.1.1.0/24 [L] 7540 1/Int. 6109 SRL
60.60.1.1 0 0
-------------------------------------------------------------------------------
No. of Routes: 1
Flags: L = LFA nexthop available
===============================================================================
*A:SRR#
*A:SRR# show router isis routes 1.1.1.0/24 alternative
===============================================================================
Route Table
===============================================================================
Prefix[Flags] Metric Lvl/Typ Ver. SysID/Hostname
NextHop MT AdminTag
Alt-Nexthop Alt-Metric Alt-Type
-------------------------------------------------------------------------------
1.1.1.0/24 7550 1/Int. 6114 SRL
60.60.1.1 0 0
11.22.12.4 (LFA) 16784764 linkProtection
-------------------------------------------------------------------------------
No. of Routes: 1
Flags: LFA = Loop-Free Alternate nexthop
===============================================================================
*A:SRR#
*A:Dut-B# show router isis routes
============================================================================
Route Table
============================================================================
Prefix [Flags] Metric Lvl/Typ Ver. SysID/Hostname
NextHop MT AdminTag
----------------------------------------------------------------------------
10.20.1.2/32 0 1/Int. 3 Dut-B
0.0.0.0 0 0
10.20.1.3/32 [L] 10 2/Int. 2 Dut-C
10.20.3.3 0 0
10.20.1.4/32 10 2/Int. 3 Dut-D
10.20.4.4 0 0
10.20.1.5/32 20 2/Int. 3 Dut-C
10.20.3.3 0 0
10.20.1.6/32 20 2/Int. 3 Dut-D
10.20.4.4 0 0
10.20.3.0/24 10 1/Int. 3 Dut-B
0.0.0.0 0 0
10.20.4.0/24 10 1/Int. 3 Dut-B
0.0.0.0 0 0
10.20.5.0/24 20 2/Int. 2 Dut-C
10.20.3.3 0 0
10.20.6.0/24 20 2/Int. 4 Dut-D
10.20.4.4 0 0
10.20.9.0/24 20 2/Int. 3 Dut-D
10.20.4.4 0 0
10.20.10.0/24 30 2/Int. 3 Dut-C
10.20.3.3 0 0
----------------------------------------------------------------------------
Routes : 11
Flags: L = LFA nexthop available
============================================================================
*A:Dut-B#
*A:Dut-B# show router isis routes alternative
============================================================================
Route Table
============================================================================
Prefix [Flags] Metric Lvl/Typ Ver. SysID/Hostname
NextHop MT AdminTag
Alt-Nexthop Alt-Metric
----------------------------------------------------------------------------
10.20.1.2/32 0 1/Int. 3 Dut-B
0.0.0.0 0 0
10.20.1.3/32 10 2/Int. 2 Dut-C
10.20.3.3 0 0
10.20.3.3 (lfa) 15
10.20.1.4/32 10 2/Int. 3 Dut-D
10.20.4.4 0 0
10.20.1.5/32 20 2/Int. 3 Dut-C
10.20.3.3 0 0
10.20.1.6/32 20 2/Int. 3 Dut-D
10.20.4.4 0 0
10.20.3.0/24 10 1/Int. 3 Dut-B
0.0.0.0 0 0
10.20.4.0/24 10 1/Int. 3 Dut-B
0.0.0.0 0 0
10.20.5.0/24 20 2/Int. 2 Dut-C
10.20.3.3 0 0
10.20.6.0/24 20 2/Int. 4
4 Dut-D
10.20.4.4 0 0
10.20.9.0/24 20 2/Int. 3 Dut-D
10.20.4.4 0 0
10.20.10.0/24 30 2/Int. 3 Dut-C
10.20.3.3 0 0
----------------------------------------------------------------------------
Routes : 11
Flags: LFA = Loop-Free Alternate nexthop
============================================================================
*A:Dut-B#
bindings
Syntax
bindings active
Context
show>router>ldp
Description
This command displays LDP bindings information.
Output
The following output is an example of LDP bindings information.
Sample Output
*A:Dut-A# show router ldp bindings active
========================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
WP - Label Withdraw Pending, BU - Alternate For Fast Re-Route
(S) - Static (M) - Multi-homed Secondary Support
(B) - BGP Next Hop (BU) - Alternate Next-hop for Fast Re-Route
========================================================================
LDP IPv4 Prefix Bindings (Active)
========================================================================
Prefix Op IngLbl EgrLbl EgrIntf/LspId EgrNextHop
------------------------------------------------------------------------
10.20.1.1/32 Pop 131071 -- -- --
10.20.1.2/32 Push -- 131071 1/1/1 10.10.1.2
10.20.1.2/32 Swap 131070 131071 1/1/1 10.10.1.2
10.20.1.2/32 Push -- 262141BU 1/1/2 10.10.2.3
10.20.1.2/32 Swap 131070 262141BU 1/1/2 10.10.2.3
10.20.1.3/32 Push -- 131069BU 1/1/1 10.10.1.2
10.20.1.3/32 Swap 131069 131069BU 1/1/1 10.10.1.2
10.20.1.3/32 Push -- 262143 1/1/2 10.10.2.3
10.20.1.3/32 Swap 131069 262143 1/1/2 10.10.2.3
10.20.1.4/32 Push -- 131068 1/1/1 10.10.1.2
10.20.1.4/32 Swap 131068 131068 1/1/1 10.10.1.2
10.20.1.4/32 Push -- 262140BU 1/1/2 10.10.2.3
10.20.1.4/32 Swap 131068 262140BU 1/1/2 10.10.2.3
10.20.1.5/32 Push -- 131067BU 1/1/1 10.10.1.2
10.20.1.5/32 Swap 131067 131067BU 1/1/1 10.10.1.2
10.20.1.5/32 Push -- 262139 1/1/2 10.10.2.3
10.20.1.5/32 Swap 131067 262139 1/1/2 10.10.2.3
10.20.1.6/32 Push -- 131066 1/1/1 10.10.1.2
10.20.1.6/32 Swap 131066 131066 1/1/1 10.10.1.2
10.20.1.6/32 Push -- 262138BU 1/1/2 10.10.2.3
10.20.1.6/32 Swap 131066 262138BU 1/1/2 10.10.2.3
------------------------------------------------------------------------
-------------------------------------------------------------------------------
No. of IPv4 Prefix Active Bindings: 10
===============================================================================
===============================================================================
LDP IPv6 Prefix Bindings (Active)
===============================================================================
Prefix Op IngLbl EgrLbl
EgrNextHop EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP Generic IPv4 P2MP Bindings (Active)
===============================================================================
P2MP-Id Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP Generic IPv6 P2MP Bindings (Active)
===============================================================================
P2MP-Id Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-SSM IPv4 P2MP Bindings (Active)
===============================================================================
Source
Group Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-SSM IPv6 P2MP Bindings (Active)
===============================================================================
Source
Group Interface
RootAddr Op IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-VPN-SSM IPv4 P2MP Bindings (Active)
===============================================================================
Source
Group RD Op
RootAddr Interface IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-VPN-SSM IPv6 P2MP Bindings (Active)
===============================================================================
Source
Group RD Op
RootAddr Interface IngLbl EgrLbl
EgrNH EgrIf/LspId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
*A:Dut-A# show router ldp bindings
========================================================================
LDP Bindings (IPv4 LSR ID 1.1.1.1:0)
(IPv6 LSR ID ::[0])
===============================================================================
Legend: U - Label In Use, N - Label Not In Use, W - Label Withdrawn
S - Status Signaled Up, D - Status Signaled Down
E - Epipe Service, V - VPLS Service, M - Mirror Service
A - Apipe Service, F - Fpipe Service, I - IES Service, R - VPRN service
P - Ipipe Service, WP - Label Withdraw Pending, C - Cpipe Service
BU - Alternate For Fast Re-Route, TLV - (Type, Length: Value)
===============================================================================
LDP IPv4 Prefix Bindings
========================================================================
Prefix Peer IngLbl EgrLbl EgrIntf/ EgrNextHop
LspId
------------------------------------------------------------------------
10.20.1.1/32 10.20.1.2 131071U -- -- --
10.20.1.1/32 10.20.1.3 131071U -- -- --
10.20.1.2/32 10.20.1.2 -- 131071 1/1/1 10.10.1.2
10.20.1.2/32 10.20.1.3 131070U 262141 1/1/2 10.10.2.3
10.20.1.3/32 10.20.1.2 131069U 131069 1/1/1 10.10.1.2
10.20.1.3/32 10.20.1.3 -- 262143 1/1/2 10.10.2.3
10.20.1.4/32 10.20.1.2 131068N 131068 1/1/1 10.10.1.2
10.20.1.4/32 10.20.1.3 131068BU 262140 1/1/2 10.10.2.3
10.20.1.5/32 10.20.1.2 131067U 131067 1/1/1 10.10.1.2
10.20.1.5/32 10.20.1.3 131067N 262139 1/1/2 10.10.2.3
10.20.1.6/32 10.20.1.2 131066N 131066 1/1/1 10.10.1.2
10.20.1.6/32 10.20.1.3 131066BU 262138 1/1/2 10.10.2.3
------------------------------------------------------------------------
No. of IPv4 Prefix Bindings: 12
========================================================================
===============================================================================
LDP IPv6 Prefix Bindings
===============================================================================
Prefix IngLbl EgrLbl
Peer EgrIntf/LspId
EgrNextHop
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP Generic IPv4 P2MP Bindings
===============================================================================
P2MP-Id
RootAddr Interface IngLbl EgrLbl
EgrNH EgrIf/LspId
Peer
-------------------------------------------------------------------------------
100
1.1.1.1 Unknw -- 131051
90.90.90.2 1/1/6
2.2.2.2:0
104
1.1.1.1 Unknw -- 131050
90.90.90.2 1/1/6
2.2.2.2:0
600
1.1.1.1 Unknw -- 131049
90.90.90.2 1/1/6
2.2.2.2:0
700
1.1.1.1 Unknw -- 131048
90.90.90.2 1/1/6
2.2.2.2:0
800
1.1.1.1 Unknw -- 131047
90.90.90.2 1/1/6
2.2.2.2:0
900
1.1.1.1 Unknw -- 131046
90.90.90.2 1/1/6
2.2.2.2:0
1500
1.1.1.1 Unknw -- 131045
90.90.90.2 1/1/6
2.2.2.2:0
100
6.6.6.6 Unknw -- 131044
90.90.90.2 1/1/6
2.2.2.2:0
900
6.6.6.6 Unknw -- 131043
90.90.90.2 1/1/6
2.2.2.2:0
-------------------------------------------------------------------------------
No. of Generic IPv4 P2MP Bindings: 9
===============================================================================
===============================================================================
LDP Generic IPv6 P2MP Bindings
===============================================================================
P2MP-Id
RootAddr Interface IngLbl EgrLbl
EgrNH EgrIf/LspId
Peer
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-SSM IPv4 P2MP Bindings
===============================================================================
Source
Group
RootAddr Interface IngLbl EgrLbl
EgrNH EgrIf/LspId
Peer
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-SSM IPv6 P2MP Bindings
===============================================================================
Source
Group
RootAddr Interface IngLbl EgrLbl
EgrNH EgrIf/LspId
Peer
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
===============================================================================
LDP In-Band-VPN-SSM IPv4 P2MP Bindings
===============================================================================
Source
Group RD
RootAddr Interface IngLbl EgrLbl
EgrNH EgrIf/LspId
Peer
-------------------------------------------------------------------------------
1.1.1.1
225.0.0.1 1.1.1.1:100
3.3.3.3 Unknwn -- 100
60.60.60.1 1/1/1
2.2.2.2:100
1.1.1.1
225.0.0.1 1.1.1.1:100
3.3.3.3 Unknwn -- 100
60.60.60.1 1/1/1
2.2.2.2:100
1.1.1.1
225.0.0.1 1.1.1.1:100
3.3.3.3 Unknwn -- 100
60.60.60.1 1/1/1
2.2.2.2:100
-------------------------------------------------------------------------------
No. of In-Band-VPN-SSM IPv4 P2MP Bindings: 3
===============================================================================
===============================================================================
LDP In-Band-VPN-SSM IPv6 P2MP Bindings
===============================================================================
===============================================================================
Source
Group RD
RootAddr Interface IngLbl EgrLbl
EgrNH EgrIf/LspId
Peer
-------------------------------------------------------------------------------
1.1.1.1
225.0.0.1 1.1.1.1:100
2000::3000 Unknwn -- 100
60.60.60.1 1/1/1
2.2.2.2:100
1.1.1.1
225.0.0.1 1.1.1.1:100
2000::3000 Unknwn -- 100
60.60.60.1 1/1/1
2.2.2.2:100
1.1.1.1
225.0.0.1 1.1.1.1:100
2000::3000 Unknwn -- 100
60.60.60.1 1/1/1
2.2.2.2:100
-------------------------------------------------------------------------------
No. of In-Band-VPN-SSM IPv6 P2MP Bindings: 3
===============================================================================
===============================================================================
LDP Service FEC 128 Bindings
===============================================================================
Type VCId SDPId IngLbl LMTU
Peer SvcId EgrLbl RMTU
-------------------------------------------------------------------------------
?-Eth 100 R. Src -- None
2.2.2.2:0 Ukwn 131023D 986
?-Eth 500 R. Src -- None
2.2.2.2:0 Ukwn 131022D 1386
?-Eth 2001 R. Src -- None
2.2.2.2:0 Ukwn 131019D 986
?-Eth 2003 R. Src -- None
2.2.2.2:0 Ukwn 131017D 986
?-Ipipe 1800 R. Src -- None
2.2.2.2:0 Ukwn 131014D 1486
-------------------------------------------------------------------------------
No. of VC Labels: 5
===============================================================================
===============================================================================
LDP Service FEC 129 Bindings
===============================================================================
SAII AGII IngLbl LMTU
TAII Type EgrLbl RMTU
Peer SvcId SDPId
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
mvpn
Syntax
mvpn
Context
show>router router-instance
Description
This command displays multicast VPN related information. The router instance must be specified.
Output
The following output is an example of MVPN information for the router-instance.
Sample Output
*A:Dut-C# show router 1 mvpn
===============================================================================
MVPN 1 configuration data
===============================================================================
signaling : Bgp auto-discovery : Enabled
UMH Selection : Highest-Ip intersite-shared : Enabled
vrf-import : N/A
vrf-export : N/A
vrf-target : target:1:1
C-Mcast Import RT : target:10.20.1.3:2
ipmsi : pim-asm 224.1.1.1
admin status : Up three-way-hello : N/A
hello-interval : N/A hello-multiplier : 35 * 0.1
tracking support : Disabled Improved Assert : N/A
spmsi : pim-ssm 225.0.0.0/32
join-tlv-packing : N/A
data-delay-interval: 3 seconds
data-threshold : 224.0.0.0/4 --> 1 kbps
===============================================================================
neighbor
Syntax
neighbor [ip-int-name | ip-address | mac ieee-mac-address | summary]
Context
show>router
Description
This command displays information about the IPv6 neighbor cache.
Parameters
ip-int-name—
specify the IP interface name
ip-address—
specify the address of the IPv6 interface address
mac ieee-mac-address—
specify the MAC address
summary—
displays summary neighbor information
Output
Neighbor Output — The following output is an example of IPv6 neighbor information, and Table 23 describes the fields.
Sample Output
B:CORE2# show router neighbor
===============================================================================
Neighbor Table (Router: Base)
===============================================================================
IPv6 Address Interface
MAC Address State Expiry Type RTR
-------------------------------------------------------------------------------
FE80::203:FAFF:FE78:5C88 net1_1_2
00:16:4d:50:17:a3 STALE 03h52m08s Dynamic Yes
FE80::203:FAFF:FE81:6888 net1_2_3
00:03:fa:1a:79:22 STALE 03h29m28s Dynamic Yes
-------------------------------------------------------------------------------
No. of Neighbor Entries: 2
===============================================================================
B:CORE2#
Table 23: Neighbor Fields
Label | Description |
IPv6 Address | Displays the IPv6 address. |
Interface | Displays the name of the IPv6 interface name. |
MAC Address | Specifies the link-layer address. |
State | Displays the current administrative state. |
Exp | Displays the number of seconds until the entry expires. |
Type | Displays the type of IPv6 interface. |
Interface | Displays the interface name. |
Rtr | Specifies whether a neighbor is a router. |
Mtu | Displays the MTU size. |
network-domains
Syntax
network-domains [detail] [network-domain-name]
Context
show>router
Description
This command displays network-domains information.
Parameters
detail—
displays detailed network-domains information
network-domain-name—
displays information for a specific network domain
Output
The following output is an example of network domain information.
Sample
*A:Dut-T>config>router# show router network-domains
===============================================================================
Network Domain Table
===============================================================================
Network Domain Description
-------------------------------------------------------------------------------
net1 Network domain 1
default Default Network Domain
-------------------------------------------------------------------------------
Network Domains : 2
===============================================================================
*A:Dut-T>config>router#
*A:Dut-T>config>router# show router network-domains detail
===============================================================================
Network Domain Table (Router: Base)
===============================================================================
-------------------------------------------------------------------------------
Network Domain : net1
-------------------------------------------------------------------------------
Description : Network domain 1
No. Of Ifs Associated : 2
No. Of SDPs Associated : 0
-------------------------------------------------------------------------------
Network Domain : default
-------------------------------------------------------------------------------
Description : Default Network Domain
No. Of Ifs Associated : 3
No. Of SDPs Associated : 0
===============================================================================
*A:Dut-T>config>router#
*A:Dut-T>config>router# show router network-domains "net1" interface-association
===============================================================================
Interface Network Domain Association Table
===============================================================================
Interface Name Port Network Domain
-------------------------------------------------------------------------------
intf1 1/2/2 net1
intf2 6/1/2 net1
-------------------------------------------------------------------------------
Interfaces : 2
===============================================================================
*A:Dut-T>config>router#
*A:Dut-T>config>service# show router network-domains "net1" sdp-association
===============================================================================
SDP Network Domain Association Table
===============================================================================
SDP Id Network Domain
-------------------------------------------------------------------------------
100 net1
-------------------------------------------------------------------------------
SDPs : 1
===============================================================================
*A:Dut-T>config>service#
origin-validation
Syntax
origin-validation
Context
show>router
Description
This command enables the context to display origin validation information.
database
Syntax
database [family] [ip-prefix/ip-prefix-length] [upto prefix-length2][origin-as as-number]
database [family] [ip-prefix/ip-prefix-length] {longer}
database {summary}
database [family] [{static}
Context
show>router>origin-validation
Description
This command displays database information.
Parameters
family—
specify the type of routing information to be displayed
Values—
ipv4 — displays IPv4 entries
ipv6 — displays IPv6 entries
ip-prefix/ip-prefix-length—
displays routes only matching the specified IP address and length
Values—
64 characters maximum length
prefix-length2—
displays routes matching up to the specified length
Values—
1 to 128
origin-as as-number—
specify the origin AS number
Values—
as-number — 0 to 4294967295
longer—
displays routes matching the ip-prefix-/ip-prefix-length and routes with longer masks
summary—
displays database summary information
static—
displays static routes
Output
The following output is an example of database information.
Sample Output
A:Dut-C# show router origin-validation database
===============================================================================
Static and Dynamic VRP Database Entries
===============================================================================
Prefix Range [Flags] Origin AS
Session IP [Flags]
-------------------------------------------------------------------------------
10.0.0.0/16-24 [Static-V] 65001
-
172.16.0.0/12-12 [Dynamic] 65002
192.168.1.1 [B]
-------------------------------------------------------------------------------
No. of Vrp Database Entries: 2
-------------------------------------------------------------------------------
Flags: B = Base instance session
M = Management instance session
Static-V = Static-Valid; Static-I = Static-Invalid
===============================================================================
A:Dut-C# show router origin-validation database summary
===============================================================================
Static and Dynamic VRP Database Summary
===============================================================================
Type IPv4 Routes IPv6 Routes
-------------------------------------------------------------------------------
192.168.1.1-B 1 0
Static 1 0
==============================================================================
rpki-session
Syntax
rpki-session [ip-address] [detail]
Context
show>router>origin-validation
Description
This command displays RPKI session information.
Parameters
ip-address—
displays RPKI session information for the specified IP address
Values—
ipv4-address: | a.b.c.d |
ipv6-address | x:x:x:x:x:x:x:x x:x:x:x:x:x:d.d.d.d where: x: [0 to FFFF]H d: [0 to 255]D interface: 32 chars max, and mandatory for link local addresses. |
detail—
displays the longer, more detailed version of the output
Output
The following output is an example of RPKI session information.
Sample Output
A:Dut-C# show router origin-validation rpki-session detail
===============================================================================
Rpki Session Information
===============================================================================
IP Address : 192.168.1.1
-------------------------------------------------------------------------------
Port : 323 Oper State : established
UpTime : 0d 00:57:41 Flaps : 0
Active IPv4 records: 17023 Active IPv6 records: 2515
Admin State : Up Local Address : n/a
Admin State : Up Local Address : 192.0.2.2
Hold Time : 120 Refresh Time : 60
Stale Route Time : 3600 Connect Retry : 120
Serial ID : 41690 Session ID : 1452020198
===============================================================================
No. of Rpki-Sessions : 1
===============================================================================
policy
Syntax
policy [name | damping | prefix-list name | as-path name | community name | admin]
Context
show>router
Description
This command displays policy-related information.
Parameters
name—
specify an existing policy-statement name
damping—
specify damping to display route damping profiles
prefix-list name—
specify a prefix list name to display the route policy entries
as-path name—
specify the route policy AS path name to display route policy entries
community name —
specify a route policy community name to display information about a particular community member
admin—
specify the admin keyword to display the entities configured in the config>router>policy-options context
Output
The following output is an example of router policy information, and Table 24 describes the fields.
Sample Output
B:CORE2# show router policy
===============================================================================
Route Policies
===============================================================================
Policy Description
-------------------------------------------------------------------------------
fromStatic
-------------------------------------------------------------------------------
Policies : 1
===============================================================================
B:CORE2#
Table 24: Policy Fields
Label | Description |
Policy | The policy name. |
Description | Displays the description of the policy. |
policy-edits
Syntax
policy-edits
Context
show>router
Description
This command displays edited policy information.
route-table
Syntax
route-table [family] [ip-prefix[/prefix-length] [longer | exact | protocol protocol-name] [all]] [next-hop-type type] [qos] [alternative] [accounting-class]
route-table [family] summary
route-table tunnel-endpoints [ip-prefix[/prefix-length]] [longer | exact] [detail]
route-table [<family>] [<ip-prefix[/prefix-length]>] [longer | exact | protocol
<protocol-name>] extensive [all]
Context
show>router
Description
This command displays the active routes in the routing table.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters
family—
specify the type of routing information to be distributed by this peer group
Values—
ipv4 — displays only those BGP peers that have the IPv4 family enabled and not those capable of exchanging IP-VPN routes
ipv6 — displays the BGP peers that are IPv6 capable
mcast-ipv4 — displays the BGP peers that are IPv4 multicast capable
mcast-ipv6 — displays multicast IPv6 route table
ip-prefix[/prefix-length]—
displays routes only matching the specified ip-address and length
Values—
The following values apply to the 7750 SR and 7950 XRS:
ipv4-prefix: | a.b.c.d (host bits must be set to 0) | |
ipv4-prefix-length: |
| 0 to 32 |
ipv6 | ipv6-prefix[/pref*: | x:x:x:x:x:x:x:x (eight 16-bit pieces) |
x:x:x:x:x:x:d.d.d.d | ||
x: [0 to FFFF]H | ||
d: [0 to 255]D | ||
prefix-length: | 1 to 128ipv6 |
Values—
The following values apply to the 7450 ESS:
ipv4-prefix: | a.b.c.d (host bits must be set to 0) |
ipv4-prefix-length: | 0 to 32 |
longer—
displays routes matching the ip-prefix/mask and routes with longer masks
exact—
displays the exact route matching the ip-prefix/mask masks
protocol protocol-name—
displays routes learned from the specified protocol
Values—
local, sub-mgmt, managed, static, ospf, ospf3, isis, rip, aggregate, bgp, bgp-vpn
summary—
displays a route table summary information
tunnel-endpoints—
specifies to include tunnel endpoint information
next-hop-type tunneled—
displays only the tunneled next-hops. For each route entry, the tunnel owner and tunnel ID is shown
Output
Standard Route Table Output — The following output is an example of standard route table information, and Table 25 describes the fields.
Sample Output
*A:Dut-B#config>service>vprn# show router 1 route-table
===============================================================================
Route Table (Service: 1)
===============================================================================
Dest Prefix[Flags] Type Proto Age Pref
Next Hop[Interface Name] Metric
-------------------------------------------------------------------------------
10.0.0.0/30 Local Local 02h09m23s 0
to_4007 0
10.0.0.8/30 Remote BGP VPN 00h06m38s 170
1.1.1.9 (tunneled) 0
11.0.0.8/30 Remote BGP VPN 00h06m38s 170
1.1.1.9 (tunneled) 0
192.168.0.0/16 [E] Remote BGP VPN 00h06m38s 170
1.1.1.9 (tunneled) 0
192.168.0.0/16 [E] Remote BGP VPN 00h06m38s 170
2.1.1.9 (tunneled) 0
-------------------------------------------------------------------------------
No. of Routes: 4
Flags: L = LFA nexthop available B = BGP backup route available
E = best-external BGP route available
n = Number of times nexthop is repeated
===============================================================================
*A:Dut-B#config>service>vprn# show router 1 route-table alternative
===============================================================================
Route Table (Service: 1)
===============================================================================
Dest Prefix[Flags] Type Proto Age Pref
Next Hop[Interface Name] Metric
Alt-NextHop Alt-
Metric
-------------------------------------------------------------------------------
10.0.0.0/30 Local Local 02h17m23s 0
to_4007 0
10.0.0.8/30 Remote BGP VPN 00h14m37s 170
1.1.1.9 (tunneled) 0
11.0.0.8/30 Remote BGP VPN 00h14m37s 170
1.1.1.9 (tunneled) 0
192.168.0.0/16 Remote BGP VPN 00h14m37s 170
1.1.1.9 (tunneled) 0
192.168.0.0/16 (Backup) Remote BGP VPN 00h14m37s 170
2.1.1.9 (tunneled) 0
192.168.0.0/16 (Best-ext) Remote BGP 00h24m37s 170
10.0.0.9 0
-------------------------------------------------------------------------------
No. of Routes: 5
Flags: Backup = BGP backup route LFA = Loop-Free Alternate nexthop
Best-ext = best-external BGP route
n = Number of times nexthop is repeated
===============================================================================
*A:Dut-B# show router route-table
============================================================================
Route Table (Router: Base)
============================================================================
Dest Prefix[Flags] Type Proto Age Pref
Next Hop[Interface Name] Metric
----------------------------------------------------------------------------
10.10.1.0/24 Local Local 00h01m25s 0
ip-10.10.1.2 0
10.10.2.0/24 [L] Remote ISIS 00h00m58s 15
10.10.12.3 13
10.10.3.0/24 Local Local 00h01m25s 0
ip-10.10.3.2 0
10.10.4.0/24 Local Local 00h01m25s 0
ip-10.10.4.2 0
10.10.5.0/24 [L] Remote ISIS 00h00m58s 15
10.10.12.3 13
10.10.6.0/24 [L] Remote ISIS 00h00m58s 15
10.10.4.4 20
10.10.9.0/24 [L] Remote ISIS 00h00m58s 15
10.10.4.4 20
10.10.10.0/24 [L] Remote ISIS 00h00m58s 15
10.10.12.3 23
10.10.11.0/24 [L] Remote ISIS 00h00m58s 15
10.10.12.3 13
10.10.12.0/24 Local Local 00h01m25s 0
ip-10.10.12.2 0
10.20.1.1/32 [L] Remote ISIS 00h00m58s 15
10.10.1.1 10
10.20.1.2/32 Local Local 00h01m25s 0
system 0
10.20.1.3/32 [L] Remote ISIS 00h00m58s 15
10.10.12.3 3
10.20.1.4/32 [L] Remote ISIS 00h00m58s 15
10.10.4.4 10
10.20.1.5/32 [L] Remote ISIS 00h00m58s 15
10.10.12.3 13
10.20.1.6/32 [L] Remote ISIS 00h00m58s 15
10.10.4.4 20
----------------------------------------------------------------------------
No. of Routes: 16
Flags: L = LFA nexthop available B = BGP backup route available
============================================================================
*A:Dut-B# show router route-table alternative
============================================================================
Route Table (Router: Base)
============================================================================
Dest Prefix[Flags] Type Proto Age Pref
Next Hop[Interface Name] Metric
Alt-NextHop Alt-Metric
----------------------------------------------------------------------------
10.10.1.0/24 Local Local 00h02m28s 0
ip-10.10.1.2 0
10.10.2.0/24 Remote ISIS 00h02m01s 15
10.10.12.3 13
10.10.1.1 (LFA) 20
10.10.3.0/24 Local Local 00h02m27s 0
ip-10.10.3.2 0
10.10.4.0/24 Local Local 00h02m28s 0
ip-10.10.4.2 0
10.10.5.0/24 Remote ISIS 00h02m01s 15
10.10.12.3 13
10.10.1.1 (LFA) 20
10.10.6.0/24 Remote ISIS 00h02m01s 15
10.10.4.4 20
10.10.12.3 (LFA) 13
10.10.9.0/24 Remote ISIS 00h02m01s 15
10.10.4.4 20
10.10.12.3 (LFA) 13
10.10.10.0/24 Remote ISIS 00h02m01s 15
10.10.12.3 23
10.10.4.4 (LFA) 20
10.10.11.0/24 Remote ISIS 00h02m01s 15
10.10.12.3 13
10.10.1.1 (LFA) 20
10.10.12.0/24 Local Local 00h02m28s 0
ip-10.10.12.2 0
10.20.1.1/32 Remote ISIS 00h02m01s 15
10.10.1.1 10
10.10.12.3 (LFA) 13
10.20.1.2/32 Local Local 00h02m28s 0
system 0
10.20.1.3/32 Remote ISIS 00h02m05s 15
10.10.12.3 3
10.10.1.1 (LFA) 20
10.20.1.4/32 Remote ISIS 00h02m05s 15
10.10.4.4 10
10.10.12.3 (LFA) 13
10.20.1.5/32 Remote ISIS 00h02m05s 15
10.10.12.3 13
10.10.4.4 (LFA) 20
10.20.1.6/32 Remote ISIS 00h02m05s 15
10.10.4.4 20
10.10.12.3 (LFA) 23
----------------------------------------------------------------------------
No. of Routes: 16
Flags: Backup = BGP backup routeLFA = Loop-Free Alternate nexthop
============================================================================
*A:Dut-C# show router route-table 1.1.1.1/32
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix Type Proto Age Pref
Next Hop[Interface Name] Metric
-------------------------------------------------------------------------------
1.1.1.1/32 Remote BGP 00h00m09s 170
10.20.1.1 (tunneled:RSVP:1) 0
-------------------------------------------------------------------------------
No. of Routes: 1
===============================================================================
A:ALA# show router route-table
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix Type Proto
Age Pref
Next Hop[Interface Name] Metric
-------------------------------------------------------------------------------
11.2.103.0/24 Remote OSPF
00h59m02s 10
21.2.4.2 2
11.2.103.0/24 Remote OSPF
00h59m02s 10
22.2.4.2 2
11.2.103.0/24 Remote OSPF
00h59m02s 10
23.2.4.2 2
11.2.103.0/24 Remote OSPF
00h59m02s 10
24.2.4.2 2
11.2.103.0/24 Remote OSPF
00h59m02s 10
100.0.0.1 2
11.2.103.0/24 Remote OSPF
00h59m02s 10
100.128.0.1 2
11.4.101.0/24 Local Local 02h14m29s 0
...
-------------------------------------------------------------------------------
A:ALA#
B:ALA-B# show router route-
table 100.10.0.0 exact =============================================================
==================
Route Table (Router: Base) =========================================================
======================
Dest Address Next Hop Type Proto Age Metric Pref
-------------------------------------------------------------------------------
100.10.0.0/16 Black Hole Remote Static 00h03m17s 1 5
-------------------------------------------------------------------------------
No. of Routes: 1 ===================================================================
============
B:ALA-B#
A:ALA-A# show router route-table 10.10.0.4
===============================================================================
Route Table
===============================================================================
Dest Address Next Hop Type Protocol Age Metric Pref
-------------------------------------------------------------------------------
10.10.0.4/32 10.10.34.4 Remote OSPF 3523 1001 10
-------------------------------------------------------------------------------
A:ALA-A#
A:ALA-A# show router route-table 10.10.0.4/32 longer
===============================================================================
Route Table
===============================================================================
Dest Address Next Hop Type Protocol Age Metric Pref
-------------------------------------------------------------------------------
10.10.0.4/32 10.10.34.4 Remote OSPF 3523 1001 10
-------------------------------------------------------------------------------
No. of Routes: 1
===============================================================================
+ : indicates that the route matches on a longer prefix
A:ALA-A#
*A:Dut-C# show router route-table
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix[Flags] Type Proto Age Pref
Next Hop[Interface Name] Metric
-------------------------------------------------------------------------------
1.1.2.0/24 Remote ISIS 00h44m24s 15
1.1.3.1 20
1.1.2.0/24 Remote ISIS 00h44m24s 15
1.2.3.2 20
1.1.3.0/24 Local Local 00h44m30s 0
to_Dut-A 0
1.1.9.0/24 Remote ISIS 00h44m16s 15
1.1.3.1 20
1.2.3.0/24 Local Local 00h44m30s 0
to_Dut-B 0
1.2.9.0/24 Remote ISIS 00h43m55s 160
1.2.3.2 10
10.12.0.0/24 Local Local 00h44m29s 0
itfToArborCP_02 0
10.20.1.1/32 Remote ISIS 00h44m24s 15
1.1.3.1 10
10.20.1.2/32 Remote ISIS 00h44m28s 15
1.2.3.2 10
10.20.1.3/32 Local Local 00h44m32s 0
system 0
20.12.0.43/32 Remote Static 00h44m31s 5
vprn1:mda-1-1 1
20.12.0.44/32 Remote Static 00h44m31s 5
vprn1:mda-2-1 1
20.12.0.45/32 Remote Static 00h44m31s 5
vprn1:mda-2-2 1
20.12.0.46/32 Remote Static 00h44m30s 5
vprn1:mda-3-1 1
100.0.0.1/32 Remote TMS 00h34m39s 167
vprn1:mda-1-1 0
100.0.0.1/32 Remote TMS 00h34m39s 167
vprn1:mda-3-1 0
138.203.71.202/32 Remote Static 00h44m29s 5
10.12.0.2 1
-------------------------------------------------------------------------------
No. of Routes: 17
Flags: L = LFA nexthop available B = BGP backup route available
n = Number of times nexthop is repeated
===============================================================================
A:ALA-A# show router route-table protocol ospf
===============================================================================
Route Table
===============================================================================
Dest Address Next Hop Type Protocol Age Metric Pref
-------------------------------------------------------------------------------
10.10.0.1/32 10.10.13.1 Remote OSPF 65844 1001 10
10.10.0.2/32 10.10.13.1 Remote OSPF 65844 2001 10
10.10.0.4/32 10.10.34.4 Remote OSPF 3523 1001 10
10.10.0.5/32 10.10.35.5 Remote OSPF 1084022 1001 10
10.10.12.0/24 10.10.13.1 Remote OSPF 65844 2000 10
10.10.15.0/24 10.10.13.1 Remote OSPF 58836 2000 10
10.10.24.0/24 10.10.34.4 Remote OSPF 3523 2000 10
10.10.25.0/24 10.10.35.5 Remote OSPF 399059 2000 10
10.10.45.0/24 10.10.34.4 Remote OSPF 3523 2000 10
-------------------------------------------------------------------------------
A:ALA-A#
show router route-table 131.132.133.134/32 next-hop-type tunneled
Route Table (Router: Base)
========================================================================
Dest Prefix Type Proto Age Pref
Next Hop[Interface Name] Metric
------------------------------------------------------------------------
131.132.133.134/32 Remote OSPF 00h02m09s 10
66.66.66.66 10
Next-hop type: tunneled, Owner: RSVP, Tunnel-ID: <out-ifindex-from-route>
------------------------------------------------------------------------
No. of Routes: 1
========================================================================
*A:Dut-B# show router route-table next-hop-type tunneled
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix Type Proto Age Pref
Next Hop[Interface Name] Metric
-------------------------------------------------------------------------------
10.10.5.0/24 Remote OSPF 00h02m20s 10
10.20.1.5 (tunneled:RSVP:1) 1100
10.10.10.0/24 Remote OSPF 00h02m20s 10
10.20.1.5 (tunneled:RSVP:1) 1100
10.20.1.5/32 Remote OSPF 00h02m20s 10
10.20.1.5 (tunneled:RSVP:1) 100
10.20.1.6/32 Remote OSPF 00h02m20s 10
10.20.1.5 (tunneled:RSVP:1) 1100
-------------------------------------------------------------------------------
No. of Routes: 4
===============================================================================
*A:Dut-B# show router route-table 10.20.1.5/32 next-hop-type tunneled
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix Type Proto Age Pref
Next Hop[Interface Name] Metric
-------------------------------------------------------------------------------
10.20.1.5/32 Remote OSPF 00h03m55s 10
10.20.1.5 (tunneled:RSVP:1) 100
-------------------------------------------------------------------------------
No. of Routes: 1
===============================================================================
*A:Dut-C# show router route-table protocol tms
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix[Flags] Type Proto Age Pref
Next Hop[Interface Name] Metric
-------------------------------------------------------------------------------
100.0.0.1/
32 Remote TMS 00h23m07s 167 vprn1:mda
-2-1 0
-------------------------------------------------------------------------------
No. of Routes: 1
Flags: L = LFA nexthop available B = BGP backup route available
n = Number of times nexthop is repeated
===============================================================================
*A:Dut-C#
*A:Dut-C# show router route-table summary
===============================================================================
Route Table Summary (Router: Base)
===============================================================================
Active Available
-------------------------------------------------------------------------------
Static 5 5
Direct 12 12
Host 0 11
BGP 0 0
BGP (Backup) 0 0
VPN Leak 0 0
OSPF 0 0
ISIS 6 6
ISIS (LFA) 0 0
RIP 0 0
LDP 0 0
Aggregate 0 0
Sub Mgmt 0 0
Managed 0 0
NAT 0 0
TMS 1 1
-------------------------------------------------------------------------------
Total 24 35
===============================================================================
NOTE: ISIS LFA routes and BGP Backup routes are not counted towards the total.
*A:Dut-C# show router route-table ipv6 3ffe::10:20:1:4/128
===============================================================================
IPv6 Route Table (Router: Base)
===============================================================================
Dest Prefix[Flags] Type Proto Age Pref
Next Hop[Interface Name] Metric
-------------------------------------------------------------------------------
3ffe::10:20:1:4/128 Remote ISIS 00h12m48s 15
fe80::205e:1ff:fe01:1-"ip-10.10.5.3" 20
3ffe::10:20:1:4/128 Remote ISIS 00h12m48s 15
fe80::6629:ffff:fe00:141-"ip-10.10.12.3" 20
-------------------------------------------------------------------------------
No. of Routes: 2
Flags: n = Number of times nexthop is repeated
B = BGP backup route available
L = LFA nexthop available
S = Sticky ECMP requested
===============================================================================
*A:Dut-C>config>router>static-route-entry#
*A:Dut-C# show router route-table ipv6 3ffe::10:20:1:4/128 extensive
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix : 3ffe::10:20:1:4/128
Protocol : ISIS
Age : 00h12m55s
Preference : 15
Next-Hop : fe80::205e:1ff:fe01:1-"ip-10.10.5.3"
Interface : ip-10.10.5.3
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
Metric : 20
ECMP-Weight : N/A
Next-Hop : fe80::6629:ffff:fe00:141-"ip-10.10.12.3"
Interface : ip-10.10.12.3
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
Metric : 20
ECMP-Weight : N/A
-------------------------------------------------------------------------------
No. of Destinations: 1
===============================================================================
*A:Dut-C# show router route-table ipv6 3ffe::10:20:1:4/128 all
===============================================================================
IPv6 Route Table (Router: Base)
===============================================================================
Dest Prefix[Flags] Type Proto Age Pref
Next Hop[Interface Name] Active Metric
-------------------------------------------------------------------------------
3ffe::10:20:1:4/128 Remote ISIS 00h13m00s 15
fe80::205e:1ff:fe01:1-"ip-10.10.5.3" Y 20
3ffe::10:20:1:4/128 Remote ISIS 00h13m00s 15
fe80::6629:ffff:fe00:141-"ip-10.10.12.3" Y 20
3ffe::10:20:1:4/128 Remote ISIS(1) 00h13m09s 15
fe80::205e:1ff:fe01:1-"ip-10.10.5.3" N 20
3ffe::10:20:1:4/128 Remote ISIS(1) 00h13m09s 15
fe80::6629:ffff:fe00:141-"ip-10.10.12.3" N 20
-------------------------------------------------------------------------------
No. of Routes: 4
Flags: n = Number of times nexthop is repeated
B = BGP backup route available
L = LFA nexthop available
S = Sticky ECMP requested
E = Inactive best-external BGP route
===============================================================================
*A:Dut-C# show router route-table ipv6 3ffe::10:20:1:4/128 all extensive
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix : 3ffe::10:20:1:4/128
Protocol : ISIS
Age : 00h13m06s
Preference : 15
Next-Hop : fe80::205e:1ff:fe01:1-"ip-10.10.5.3"
Interface : ip-10.10.5.3
Active : Yes
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
Metric : 20
ECMP-Weight : N/A
Next-Hop : fe80::6629:ffff:fe00:141-"ip-10.10.12.3"
Interface : ip-10.10.12.3
Active : Yes
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
Metric : 20
ECMP-Weight : N/A
-------------------------------------------------------------------------------
Dest Prefix : 3ffe::10:20:1:4/128
Protocol : ISIS (1)
Age : 00h13m15s
Preference : 15
Next-Hop : fe80::205e:1ff:fe01:1-"ip-10.10.5.3"
Interface : ip-10.10.5.3
Active : No
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
Metric : 20
ECMP-Weight : N/A
Next-Hop : fe80::6629:ffff:fe00:141-"ip-10.10.12.3"
Interface : ip-10.10.12.3
Active : No
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
Metric : 20
ECMP-Weight : N/A
-------------------------------------------------------------------------------
No. of Destinations: 2
===============================================================================
Table 25: Standard Route Table Fields
Label | Description |
Dest Address | The route destination address and mask. |
Next Hop | The next hop IP address for the route destination. |
Type | Local The route is a local route. |
Remote The route is a remote route. | |
Protocol | The protocol through which the route was learned. |
Age | The route age in seconds for the route. |
Metric | The route metric value for the route. |
Pref | The route preference value for the route. |
No. of Routes | The number of routes displayed in the list. |
Summary Route Table Output — Summary output for the route table displays the number of active routes and the number of routes learned by the router by protocol. Total active and available routes are also displayed.
The following output is an example of summary route table information.
Sample Output
A:ALA-A# show router route-table summary
===============================================================================
Route Table Summary
===============================================================================
Active Available
-------------------------------------------------------------------------------
Static 1 1
Direct 6 6
BGP 0 0
OSPF 9 9
ISIS 0 0
RIP 0 0
Aggregate 0 0
-------------------------------------------------------------------------------
Total 16 16
===============================================================================
A:ALA-A#
*A:SRR# show router route-table summary
===============================================================================
Route Table Summary (Router: Base)
===============================================================================
Active Available
-------------------------------------------------------------------------------
Static 6 6
Direct 1698 1698
Host 0 1477
BGP 0 0
BGP (Backup) 0 0
VPN Leak 0 0
OSPF 0 0
ISIS 3296 6383
ISIS (LFA) 472 1499
RIP 0 0
LDP 6 6
Aggregate 0 0
Sub Mgmt 0 0
Managed 0 0
NAT 0 0
TMS 0 0
-------------------------------------------------------------------------------
Total 5006 9570
===============================================================================
NOTE: ISIS LFA routes and BGP Backup routes are not counted towards the total.
*A:SRR#
*A:Dut-C>config>router>mpls>lsp# show router route-table 10.0.0.2/32 extensive
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix : 10.0.0.2/32
Protocol : OSPF (1)
Age : 00h02m40s
Preference : 150
Next-Hop : 1.0.0.3 (RSVP tunnel:94)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
Metric : 10
ECMP-Weight : 20
Next-Hop : 1.0.0.3 (RSVP tunnel:61442)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
Metric : 10
ECMP-Weight : 1
-------------------------------------------------------------------------------
No. of Destinations: 1
===============================================================================
*A:Dut-C>config>router>static-route-entry>indirect>tunnel-next-hop# show router route-table 10.1.0.5/32 extensive
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix : 10.1.0.5/32
Protocol : STATIC
Age : 00h00m11s
Preference : 5
Next-Hop : 1.0.0.2 (RSVP tunnel:128)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
Metric : 1
ECMP-Weight : 18
Next-Hop : 1.0.0.2 (RSVP tunnel:132)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
Metric : 1
ECMP-Weight : 2
Next-Hop : 1.0.0.3 (RSVP tunnel:94)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
Metric : 1
ECMP-Weight : 7
Next-Hop : 1.0.0.3 (RSVP tunnel:61442)
QoS : Priority=n/c, FC=n/c
Source-Class : 0
Dest-Class : 0
Metric : 1
ECMP-Weight : 2
-------------------------------------------------------------------------------
No. of Destinations: 1
===============================================================================
rtr-advertisement
Syntax
rtr-advertisement [interface interface-name] [prefix ipv6-prefix[/prefix-length]]
rtr-advertisement [conflicts]
Context
show>router
Description
This command displays router advertisement information.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters
interface-name—
Maximum 32 characters.
ipv6-prefix[/prefix-length]—
displays routes only matching the specified ip-address and length and only applies to the 7750 SR and 7950 XRS
Values—
ipv6 | ipv6-prefix[/pref*: | x:x:x:x:x:x:x:x (eight 16-bit pieces) |
x:x:x:x:x:x:d.d.d.d | ||
x: [0 to FFFF]H | ||
d: [0 to 255]D | ||
prefix-length: | 1 to 128 |
Output
Router-Advertisement Table Output — The following output is an example of router advertisement information, and Table 26 describes the fields.
Sample Output
A:Dut-A# show router rtr-advertisement
=======================================================================
Router Advertisement
=======================================================================
-------------------------------------------------------------------------------
Interface: interfaceNetworkNonDefault
-------------------------------------------------------------------------------
Rtr Advertisement Tx : 8 Last Sent : 00h01m28s
Nbr Solicitation Tx : 83 Last Sent : 00h00m17s
Nbr Advertisement Tx : 74 Last Sent : 00h00m25s
Rtr Advertisement Rx : 8 Rtr Solicitation Rx : 0
Nbr Advertisement Rx : 83 Nbr Solicitation Rx : 74
-------------------------------------------------------------------------------
Server1 : 2001:db8::1
Server2 : N/A
Server3 : N/A
Server4 : N/A
Rdnss-lifetime : 1200 Include-dns : yes
-------------------------------------------------------------------------------
Max Advert Interval : 601 Min Advert Interval : 201
Managed Config : TRUE Other Config : TRUE
Reachable Time : 00h00m00s400ms Router Lifetime : 00h30m01s
Retransmit Time : 00h00m00s400ms Hop Limit : 63
Link MTU : 1500
Prefix: 211::/120
Autonomous Flag : FALSE On-link flag : FALSE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
Prefix: 231::/120
Autonomous Flag : FALSE On-link flag : FALSE
Preferred Lifetime : 49710d06h Valid Lifetime : 49710d06h
Prefix: 241::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 00h00m00s Valid Lifetime : 00h00m00s
Prefix: 251::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
-------------------------------------------------------------------------------
Advertisement from: FE80::200:FF:FE00:2
Managed Config : FALSE Other Config : FALSE
Reachable Time : 00h00m00s0ms Router Lifetime : 00h30m00s
Retransmit Time : 00h00m00s0ms Hop Limit : 64
Link MTU : 0
-------------------------------------------------------------------------------
Interface: interfaceServiceNonDefault
-------------------------------------------------------------------------------
Rtr Advertisement Tx : 8 Last Sent : 00h06m41s
Nbr Solicitation Tx : 166 Last Sent : 00h00m04s
Nbr Advertisement Tx : 143 Last Sent : 00h00m05s
Rtr Advertisement Rx : 8 Rtr Solicitation Rx : 0
Nbr Advertisement Rx : 166 Nbr Solicitation Rx : 143
-------------------------------------------------------------------------------
Max Advert Interval : 601 Min Advert Interval : 201
Managed Config : TRUE Other Config : TRUE
Reachable Time : 00h00m00s400ms Router Lifetime : 00h30m01s
Retransmit Time : 00h00m00s400ms Hop Limit : 63
Link MTU : 1500
Prefix: 23::/120
Autonomous Flag : FALSE On-link flag : FALSE
Preferred Lifetime : infinite Valid Lifetime : infinite
Prefix: 24::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 00h00m00s Valid Lifetime : 00h00m00s
Prefix: 25::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
-------------------------------------------------------------------------------
Advertisement from: FE80::200:FF:FE00:2
Managed Config : FALSE Other Config : FALSE
Reachable Time : 00h00m00s0ms Router Lifetime : 00h30m00s
Retransmit Time : 00h00m00s0ms Hop Limit : 64
Link MTU : 0
Prefix: 2::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
Prefix: 23::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
Prefix: 24::/119
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
Prefix: 25::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : infinite
Prefix: 231::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
-------------------------------------------------------------------------------
...
A:Dut-A#
Table 26: Router Advertisement Table Fields
Label | Description |
Rtr Advertisement Tx/Last Sent | The number of router advertisements sent and time since they were sent. |
Nbr Solicitation Tx | The number of neighbor solicitations sent and time since they were sent. |
Nbr Advertisement Tx | The number of neighbor advertisements sent and time since they were sent. |
Rtr Advertisement Rx | The number of router advertisements received and time since they were received. |
Nbr Advertisement Rx | The number of neighbor advertisements received and time since they were received. |
Max Advert Interval | The maximum interval between sending router advertisement messages. |
Managed Config | True Indicates that DHCPv6 has been configured. |
False Indicates that DHCPv6 is not available for address configuration. | |
Reachable Time | The time, in milliseconds, that a node assumes a neighbor is reachable after receiving a reachability confirmation. |
Retransmit Time | The time, in milliseconds, between retransmitted neighbor solicitation messages. |
Link MTU | The MTU number the nodes use for sending packets on the link. |
Rtr Solicitation Rx | The number of router solicitations received and time since they were received. |
Nbr Solicitation Rx | The number of neighbor solicitations received and time since they were received. |
Min Advert Interval | The minimum interval between sending ICMPv6 neighbor discovery router advertisement messages. |
Other Config | True Indicates there are other stateful configurations. |
False Indicates there are no other stateful configurations. | |
Router Lifetime | Displays the router lifetime in seconds. |
Hop Limit | Displays the current hop limit. |
Router-Advertisement Conflicts Output — The following output is an example of router advertisement conflicts, and Table 27 describes the fields.
Sample Output
A:Dut-A# show>router# rtr-advertisement conflicts
===============================================================================
Router Advertisement
===============================================================================
Interface: interfaceNetworkNonDefault
-------------------------------------------------------------------------------
Advertisement from: FE80::200:FF:FE00:2
Managed Config : FALSE [TRUE]
Other Config : FALSE [TRUE]
Reachable Time : 00h00m00s0ms [00h00m00s400ms]
Router Lifetime : 00h30m00s [00h30m01s]
Retransmit Time : 00h00m00s0ms [00h00m00s400ms]
Hop Limit : 64 [63]
Link MTU : 0 [1500]
Prefix not present in neighbor router advertisement
Prefix: 211::/120
Autonomous Flag : FALSE On-link flag : FALSE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
Prefix not present in neighbor router advertisement
Prefix: 231::/120
Autonomous Flag : FALSE On-link flag : FALSE
Preferred Lifetime : 49710d06h Valid Lifetime : 49710d06h
Prefix not present in neighbor router advertisement
Prefix: 241::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 00h00m00s Valid Lifetime : 00h00m00s
Prefix not present in neighbor router advertisement
Prefix: 251::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
-------------------------------------------------------------------------------
Interface: interfaceServiceNonDefault
-------------------------------------------------------------------------------
Advertisement from: FE80::200:FF:FE00:2
Managed Config : FALSE [TRUE]
Other Config : FALSE [TRUE]
Reachable Time : 00h00m00s0ms [00h00m00s400ms]
Router Lifetime : 00h30m00s [00h30m01s]
Retransmit Time : 00h00m00s0ms [00h00m00s400ms]
Hop Limit : 64 [63]
Link MTU : 0 [1500]
Prefix not present in own router advertisement
Prefix: 2::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
Prefix: 23::/120
Autonomous Flag : TRUE [FALSE]
On-link flag : TRUE [FALSE]
Preferred Lifetime: 07d00h00m [infinite]
Valid Lifetime : 30d00h00m [infinite]
Prefix not present in own router advertisement
Prefix: 24::/119
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
Prefix not present in neighbor router advertisement
Prefix: 24::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 00h00m00s Valid Lifetime : 00h00m00s
Prefix: 25::/120
Valid Lifetime : infinite [30d00h00m]
Prefix not present in own router advertisement
Prefix: 231::/120
Autonomous Flag : TRUE On-link flag : TRUE
Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m
===============================================================================
A:Dut-A#
Table 27: Router-Advertisement Conflicts Fields
Label | Description |
Advertisement from | The address of the advertising router. |
Reachable Time | The time, in milliseconds, that a node assumes a neighbor is reachable after receiving a reachability confirmation. |
Router Lifetime | Displays the router lifetime in seconds. |
Retransmit Time | The time, in milliseconds, between retransmitted neighbor solicitation messages. |
Hop Limit | Displays the current hop limit |
Link MTU | The MTU number the nodes use for sending packets on the link. |
static-arp
Syntax
static-arp [ip-addr | ip-int-name | mac ieee-mac-addr]
Context
show>router
Description
This command displays the router static ARP table sorted by IP address. If no options are present, all ARP entries are displayed.
Parameters
ip-addr—
only displays static ARP entries associated with the specified IP address
ip-int-name—
only displays static ARP entries associated with the specified IP interface name
mac ieee-mac-addr—
only displays static ARP entries associated with the specified MAC address
Output
Static ARP Table Output — The following output is an example of static AARP table information, and Table 28 describes the output fields.
Sample Output
A:ALA-A# show router static-arp
===============================================================================
ARP Table
===============================================================================
IP Address MAC Address Age Type Interface
-------------------------------------------------------------------------------
10.200.0.253 00:00:5a:40:00:01 00:00:00 Sta to-ser1
12.200.1.1 00:00:5a:01:00:33 00:00:00 Inv to-ser1a
-------------------------------------------------------------------------------
No. of ARP Entries: 1
===============================================================================
A:ALA-A#
A:ALA-A# show router static-arp 12.200.1.1
===============================================================================
ARP Table
===============================================================================
IP Address MAC Address Age Type Interface
-------------------------------------------------------------------------------
12.200.1.1 00:00:5a:01:00:33 00:00:00 Inv to-ser1
===============================================================================
A:ALA-A#
A:ALA-A# show router static-arp to-ser1
===============================================================================
ARP Table
===============================================================================
IP Address MAC Address Age Type Interface
-------------------------------------------------------------------------------
10.200.0.253 00:00:5a:40:00:01 00:00:00 Sta to-ser1
===============================================================================
A:ALA-A#
A:ALA-A# show router static-arp mac 00:00:5a:40:00:01
===============================================================================
ARP Table
===============================================================================
IP Address MAC Address Age Type Interface
-------------------------------------------------------------------------------
10.200.0.253 00:00:5a:40:00:01 00:00:00 Sta to-ser1
===============================================================================
A:ALA-A#
Table 28: Static ARP Table Fields
Label | Description |
IP Address | The IP address of the static ARP entry. |
MAC Address | The MAC address of the static ARP entry. |
Age | The age of the ARP entry. Static ARPs always have 00:00:00 for the age. |
Type | Inv The ARP entry is an inactive static ARP entry (invalid). |
Sta The ARP entry is an active static ARP entry. | |
Interface | The IP interface name associated with the ARP entry. |
No. of ARP Entries | The number of ARP entries displayed in the list. |
static-route
Syntax
static-route [family] [[ip-prefix /mask] | [preference preference] | [next-hop ip-address] | tag tag]
Context
show>router
Description
This command displays the static entries in the routing table. If no options are present, all static routes are displayed sorted by prefix.
Parameters
family—
specify the type of routing information to be distributed by this peer group
Values—
ipv4 — displays only those BGP peers that have the IPv4 family enabled and not those capable of exchanging IP-VPN routes
ipv6 — displays the BGP peers that are IPv6 capable
mcast-ipv4 — displays the BGP peers that are IPv4 multicast capable
ip-prefix /mask—
displays static routes only matching the specified ip-prefix and mask
Values—
The following values apply to the 7750 SR and 7950 XRS:
ipv4-prefix: | a.b.c.d (host bits must be 0) | |
ipv4-prefix-length: | 0 to 32 | |
ipv6-prefix: | x:x:x:x:x:x:x:x (eight 16-bit pieces) | |
x:x:x:x:x:x:d.d.d.d | ||
x: | [0 to FFFF]H | |
d: | [0 to 255]D | |
ipv6-prefix-length: | 0 to 128 | |
Values—
The following values apply to the 7450 ESS:
ipv4-prefix: | a.b.c.d (host bits must be 0) |
ipv4-prefix-length: | 0 to 32 |
preference preference—
only displays static routes with the specified route preference
Values—
0 to 65535
next-hop ip-address—
only displays static routes with the specified next hop IP address
Values—
The following values apply to the 7750 SR and 7950 XRS:
ipv4-address: | a.b.c.d (host bits must be 0) | |
ipv6-address: | x:x:x:x:x:x:x:x (eight 16-bit pieces) | |
x:x:x:x:x:x:d.d.d.d | ||
x: | [0 to FFFF]H | |
d: | [0 to 255]D |
Values—
The following values apply to the 7450 ESS:
ipv4-address: a.b.c.d (host bits must be 0)
tag tag—
displays the tag used to add a 32-bit integer tag to the static route. The tag is used in route policies to control distribution of the route into other protocols.
Values—
1 to 4294967295
Output
Static Route Output — The following output is an example of static route information, and Table 29 describes the fields.
Sample Output
A:ALA-A# show router static-route
===============================================================================
Route Table
===============================================================================
IP Addr/mask Pref Metric Type Nexthop Interface Active
-------------------------------------------------------------------------------
192.168.250.0/24 5 1 ID 10.200.10.1 to-ser1 Y
192.168.252.0/24 5 1 NH 10.10.0.254 n/a N
192.168.253.0/24 5 1 NH to-ser1 n/a N
192.168.253.0/24 5 1 NH 10.10.0.254 n/a N
192.168.254.0/24 4 1 BH black-hole n/a Y
===============================================================================
A:ALA-A#
A:ALA-A# show router static-route 192.168.250.0/24
===============================================================================
Route Table
===============================================================================
IP Addr/mask Pref Metric Type Nexthop Interface Active
-------------------------------------------------------------------------------
192.168.250.0/24 5 1 ID 10.200.10.1 to-ser1 Y
===============================================================================
A:ALA-A#
A:ALA-A# show router static-route preference 4
===============================================================================
Route Table
===============================================================================
IP Addr/mask Pref Metric Type Nexthop Interface Active
-------------------------------------------------------------------------------
192.168.254.0/24 4 1 BH black-hole n/a Y
===============================================================================
A:ALA-A#
A:ALA-A# show router static-route next-hop 10.10.0.254
===============================================================================
Route Table
===============================================================================
IP Addr/mask Pref Metric Type Nexthop Interface Active
-------------------------------------------------------------------------------
192.168.253.0/24 5 1 NH 10.10.0.254 n/a N
===============================================================================
A:ALA-A#
===============================================================================
Static Route Table (Router: Base) Family: IPv6
===============================================================================
Prefix : 3ffe::10:10:14:0/120
Nexthop : 3ffe::10:20:1:6
Type : Indirect
Interface : n/a Active : Y
Prefix List : n/a Prefix List Type : n/a
Metric : 1 Preference : 5
Source Class : 0 Dest Class : 0
Admin State : Up Tag : 0
Creation Origin : manual
BFD : disabled
Community :
CPE-check : disabled
Tunnel Resolution: any Disallow-IGP : disabled
RSVP-TE Tunnels : disabled LDP Tunnels : disabled
SR-ISIS Tunnels : disabled SR-OSPF Tunnels : disabled
SR-TE Tunnels : disabled
-------------------------------------------------------------------------------
Prefix : 3ffe::10:10:14:0/120
Nexthop : 3ffe::20:20:1:6
Type : Indirect
Interface : n/a Active : Y
Prefix List : n/a Prefix List Type : n/a
Metric : 1 Preference : 5
Source Class : 0 Dest Class : 0
Admin State : Up Tag : 0
Creation Origin : manual
BFD : disabled
Community :
CPE-check : disabled
Tunnel Resolution: any Disallow-IGP : disabled
RSVP-TE Tunnels : disabled LDP Tunnels : disabled
SR-ISIS Tunnels : disabled SR-OSPF Tunnels : disabled
SR-TE Tunnels : disabled
-------------------------------------------------------------------------------
Prefix : 3ffe::10:10:14:0/120
Nexthop : 3ffe::20:20:1:5
Type : Indirect
Interface : n/a Active : Y
Prefix List : n/a Prefix List Type : n/a
Metric : 1 Preference : 5
Source Class : 0 Dest Class : 0
Admin State : Up Tag : 0
Creation Origin : manual
BFD : disabled
Community :
CPE-check : disabled
Tunnel Resolution: any Disallow-IGP : disabled
RSVP-TE Tunnels : disabled LDP Tunnels : disabled
SR-ISIS Tunnels : disabled SR-OSPF Tunnels : disabled
SR-TE Tunnels : disabled
-------------------------------------------------------------------------------
Prefix : 3ffe::10:10:14:0/120
Nexthop : 3ffe::10:20:1:5
Type : Indirect
Interface : n/a Active : Y
Prefix List : n/a Prefix List Type : n/a
Metric : 1 Preference : 5
Source Class : 0 Dest Class : 0
Admin State : Up Tag : 0
Creation Origin : manual
BFD : disabled
Community :
CPE-check : disabled
Tunnel Resolution: filter Disallow-IGP : disabled
RSVP-TE Tunnels : disabled LDP Tunnels : disabled
SR-ISIS Tunnels : enabled SR-OSPF Tunnels : disabled
SR-TE Tunnels : disabled
-------------------------------------------------------------------------------
No. of Static Routes: 4
===============================================================================
*A:Dut-C#
Table 29: Static Route Fields
Label | Description |
IP Addr/mask | The static route destination address and mask. |
Pref | The route preference value for the static route. |
Metric | The route metric value for the static route. |
Type | BH The static route is a black hole route. The nexthop for this type of route is black-hole. |
ID The static route is an indirect route, where the nexthop for this type of route is the non-directly connected next hop. | |
NH The route is a static route with a directly connected next hop. The Nexthop for this type of route is either the next hop IP address or an egress IP interface name. | |
Next Hop | The next hop for the static route destination. |
Protocol | The protocol through which the route was learned. |
Interface | The egress IP interface name for the static route. n/a indicates there is no current egress interface because the static route is inactive or a black hole route. |
Active | N The static route is inactive; for example, the static route is disabled or the next hop IP interface is down. |
Y The static route is active. | |
No. of Routes | The number of routes displayed in the list. |
The following output is an example static route information for the 7750 SR and 7950 XRS:
*A:sim1# show router static-route 10.10.0.0/16 detail
===============================================================================
Static Route Table (Router: Base) Family : [IPv4|MCast-IPv4|IPv6]
===============================================================================
Network : 3FFD:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFE3/120 Type : [Nexthop|Indirect|Blackhole]
Nexthop : [address | LSP label & name] Nexthop type: [IP|LDP|RSVP-TE]
Interface :
Metric : 1 Prefence : 5
Active : [Y|N] Admin State : [Up|Down]
Tag :
BFD: [enable|disabled]
CPE-check: [enabled|disabled] State: [Up|Down]
Target : <address>
Interval : [value | n/a] Drop Count : <value>
Log : [Y|N]
CPE Host Up/Dn Time : 0d 16:32:28
CPE Echo Req Tx : 0 CPE Echo Reply Rx: 0
CPE Up Transitions : 0 CPE Down Transitions : 0
CPE TTL : 13
===============================================================================
A:sim1#
*A:CPM133>config>router# show router static-route 3.3.3.3/32 detail
===============================================================================
Static Route Table (Router: Base) Family: IPv4
===============================================================================
Prefix : 3.3.3.3/32
Nexthop : n/a
Type : Blackhole Nexthop Type : IP
Interface : n/a Active : Y
Prefix List : n/a Prefix List Type : n/a
Metric : 1 Preference : 5
Admin State : Up Tag : 0
BFD : disabled Community : 100:33
CPE-check : disabled
-------------------------------------------------------------------------------
No. of Static Routes: 1
===============================================================================
*A:Dut-C> show router static-route 10.1.0.5/32 detail
===============================================================================
Static Route Table (Router: Base) Family: IPv4 ===============================================================================
Prefix : 10.1.0.5/32
Nexthop : 1.0.0.2
Indirect : Type
Interface : n/a Active : Y
Prefix List : n/a Prefix List Type : n/a
Metric : 1 Preference : 5
Source Class : 0 Dest Class : 0
Admin State : Up Tag : 0
Creation Origin : manual
BFD : disabled
Community :
CPE-check : disabled
Tunnel Resolution: filter Disallow-IGP : disabled
RSVP-TE Tunnels : enabled LDP Tunnels : disabled
-------------------------------------------------------------------------------
No. of Static Routes: 1
===============================================================================
service-prefix
Syntax
service-prefix
Context
show>router
Description
This command displays the address ranges reserved by this node for services sorted by prefix.
Output
Service Prefix Output — The following output is an example of service prefix information, and Table 30 describes the fields.
Sample Output
A:ALA-A# show router service-prefix
=================================================
Address Ranges reserved for Services
=================================================
IP Prefix Mask Exclusive
-------------------------------------------------
172.16.1.0 24 true
172.16.2.0 24 false
=================================================
A:ALA-A#
Table 30: Service Prefix Fields
Label | Description |
IP Prefix | The IP prefix of the range of addresses included in the range for services. |
Mask | The subnet mask length associated with the IP prefix. |
Exclusive | false — Addresses in the range are not exclusively for use for service IP addresses. true — Addresses in the range are exclusively for use for service IP addresses and cannot be assigned to network IP interfaces. |
sgt-qos
Syntax
sgt-qos
Context
show>router
Description
This command displays self-generated traffic QoS related information.
application
Syntax
application [app-name] [dscp | dot1p]
Context
show>router>sgt-qos
Description
This command displays application QoS settings.
Parameters
app-name—
The specific application.
Values—
arp, bgp, cflowd, dhcp, dns, ftp, icmp, igmp, isis, ldp, mld, msdp, ndis, ntp, ospf, pimradius, rip, rsvpsnmp, snmp-notification, srrp, ssh, syslog, tacplus, telnet, tftp, traceroute, vrrp, pppoe
dscp-map
Syntax
dscp-map [dscp-name]
Context
show>router>sgt-qos
Description
This command displays DSCP to FC mappings.
Parameters
dscp-name—
The specific DSCP name.
Values—
be, ef, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cp9, cs1, cs2, cs3, cs4, cs5, nc1, nc2, af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, cp11, cp13, cp15, cp17, cp19, cp21, cp23, cp25, cp27, cp29, cp31, cp33, cp35, cp37, cp39, cp41, cp42, cp43, cp44, cp45, cp47, cp49, cp50, cp51, cp52, cp53, cp54, cp55, cp57, cp58, cp59, cp60, cp61, cp62, cp63
status
Syntax
status
Context
show>router
Description
This command displays the router status.
Output
Router Status Output — The following output is an example of router status information, and Table 31 describes the fields.
There are multiple instances of OSPF. OSPF-0 is persistent. OSPF-1 through OSPF-31 are present when that particular OSPF instance is configured.
Sample Output
*A:Performance# show router status
================================================================
Router Status (Router: Base)
================================================================
Admin State Oper State
----------------------------------------------------------------
Router Up Up
OSPFv2-0 Up Up
RIP Up Up
ISIS Up Up
MPLS Not configured Not configured
RSVP Not configured Not configured
LDP Not configured Not configured
BGP Up Up
IGMP Not configured Not configured
PIM Not configured Not configured
OSPFv3 Not configured Not configured
MSDP Not configured Not configured
Max Routes No Limit
Total IPv4 Routes 244285
Total IPv6 Routes 0
Max Multicast Routes No Limit
Total Multicast Routes PIM not configured
ECMP Max Routes 1
Triggered Policies No
================================================================
*A:Performance#
Table 31: Router Status Fields
Label | Description |
Router | The administrative and operational states for the router. |
OSPF | The administrative and operational states for the OSPF protocol. |
RIP | The administrative and operational states for RIP. |
ISIS | The administrative and operational states for the IS-IS protocol. |
MPLS | The administrative and operational states for the MPLS protocol. |
RSVP | The administrative and operational states for RSVP. |
LDP | The administrative and operational states for LDP. |
BGP | The administrative and operational states for BGP. |
IGMP | The administrative and operational states for IGMP. |
MLD | The administrative and operational states for the MLD protocol. |
PIM | The administrative and operational states for the PIM protocol. |
OSPFv3 | The administrative and operational states for the OSPFv3 protocol. |
MSDP | The administrative and operational states for MSDP. |
Max Routes | The maximum number of routes configured for the system. |
Total Routes | The total number of routes in the route table. |
ECMP Max Routes | The number of ECMP routes configured for path sharing. |
service-id | state — Current single SFM state start — Last time this vRtr went into overload, after having respected the hold-off time interval — How long the vRtr remained or is in overload |
ICMP Tunneling | No — ICMP tunneling is disabled. Yes — TICMP tunneling is enabled. |
VPRN Local TTL Propagate | inherit — VPRN instance is to inherit the global configuration none — TTL of IP packet is not propagated into the VC or transport label stack vc-only — TTL of the IP packet is propagated into the VC label and not into the labels in the transport label stack al — TTL of the IP packet is propagated into the VC label and all labels in the transport label stack |
VPRN Transit TTL Propag* | inherit — VPRN instance is to inherit the global configuration none — TTL of IP packet is not propagated into the VC or transport label stack vc-only — TTL of the IP packet is propagated into the VC label and not into the labels in the transport label stack al — TTL of the IP packet is propagated into the VC label and all labels in the transport label stack |
Label Route Local TTL P* | all — TTL of the IP packet is propagated into all labels of the transport label stack none — TTL of the IP packet is not propagated into the transport label stack |
Label Route Transit TTL* | all — TTL of the IP packet is propagated into all labels of the transport label stack none — TTL of the IP packet is not propagated into the transport label stack |
LSR Label Route TTL Pro* | all — TTL of the swapped label is propagated into all labels of the transport label stack none — TTL of the swapped label is not propagated into the transport label stack |
Triggered Policies | No — Triggered route policy re-evaluation is disabled. Yes — Triggered route policy re-evaluation is enabled. |
7450 ESS Router Status Output—The following output is an example of router status information for the 7450 ESS:
Sample Output
*A:Performance# configure router ospf [1..31] shutdown
*A:Performance# show router status
================================================================
Router Status (Router: Base)
================================================================
Admin State Oper State
----------------------------------------------------------------
Router Up Up
OSPFv2-0 Up Up
OSPFv2-1 Down Down
OSPFv2-2 Down Down
OSPFv2-3 Down Down
OSPFv2-4 Down Down
OSPFv2-5 Down Down
OSPFv2-6 Down Down
OSPFv2-7 Down Down
OSPFv2-8 Down Down
OSPFv2-9 Down Down
OSPFv2-10 Down Down
OSPFv2-11 Down Down
OSPFv2-12 Down Down
OSPFv2-13 Down Down
OSPFv2-14 Down Down
OSPFv2-15 Down Down
OSPFv2-16 Down Down
OSPFv2-17 Down Down
OSPFv2-18 Down Down
OSPFv2-19 Down Down
OSPFv2-20 Down Down
OSPFv2-21 Down Down
OSPFv2-22 Down Down
OSPFv2-23 Down Down
OSPFv2-24 Down Down
OSPFv2-25 Down Down
OSPFv2-26 Down Down
OSPFv2-27 Down Down
OSPFv2-28 Down Down
OSPFv2-29 Down Down
OSPFv2-30 Down Down
OSPFv2-31 Down Down
RIP Up Up
ISIS Up Up
MPLS Not configured Not configured
RSVP Not configured Not configured
LDP Not configured Not configured
BGP Up Up
IGMP Not configured Not configured
PIM Not configured Not configured
OSPFv3 Not configured Not configured
MSDP Not configured Not configured
Max Routes No Limit
Total IPv4 Routes 244277
Max Multicast Routes No Limit
Total Multicast Routes PIM not configured
ECMP Max Routes 1
Single SFM Overload Enabled hold-off 30 sec
Single SFM State normal
Single SFM Start 004 19:03:39.680
Single SFM Interval 0d 00:16:06
Reassembly ISA-BB group Not configured
Ipv6 Nbr Reachab. time Not configured 30
Triggered Policies No
================================================================
*A:Performance#
Router Status Output for 7750 SR and 7950 XRS—The following output is an example of router status information for the 7750 SR and 7950 XRS:
Sample Output
*A:Performance# configure router ospf [1..31] shutdown
*A:Performance# show router status
================================================================
Router Status (Router: Base)
================================================================
Admin State Oper State
----------------------------------------------------------------
Router Up Up
OSPFv2-0 Up Up
OSPFv2-1 Down Down
OSPFv2-2 Down Down
OSPFv2-3 Down Down
OSPFv2-4 Down Down
OSPFv2-5 Down Down
OSPFv2-6 Down Down
OSPFv2-7 Down Down
OSPFv2-8 Down Down
OSPFv2-9 Down Down
OSPFv2-10 Down Down
OSPFv2-11 Down Down
OSPFv2-12 Down Down
OSPFv2-13 Down Down
OSPFv2-14 Down Down
OSPFv2-15 Down Down
OSPFv2-16 Down Down
OSPFv2-17 Down Down
OSPFv2-18 Down Down
OSPFv2-19 Down Down
OSPFv2-20 Down Down
OSPFv2-21 Down Down
OSPFv2-22 Down Down
OSPFv2-23 Down Down
OSPFv2-24 Down Down
OSPFv2-25 Down Down
OSPFv2-26 Down Down
OSPFv2-27 Down Down
OSPFv2-28 Down Down
OSPFv2-29 Down Down
OSPFv2-30 Down Down
OSPFv2-31 Down Down
RIP Up Up
ISIS Up Up
MPLS Not configured Not configured
RSVP Not configured Not configured
LDP Not configured Not configured
BGP Up Up
IGMP Not configured Not configured
PIM Not configured Not configured
OSPFv3 Not configured Not configured
MSDP Not configured Not configured
Max Routes No Limit
Total IPv4 Routes 244277
Total IPv6 Routes 0
Max Multicast Routes No Limit
Total Multicast Routes PIM not configured
ECMP Max Routes 1
Single SFM Overload Enabled hold-off 30 sec
Single SFM State normal
Single SFM Start 004 19:03:39.680
Single SFM Interval 0d 00:16:06
Reassembly ISA-BB group Not configured
Ipv6 Nbr Reachab. time Not configured 30
Triggered Policies No
================================================================
*A:Performance#
TTL Propagation and ICMP Tunneling—The following output is an example of TTL propagation and ICMP tunneling configurations, first in base router and then in a VPRN service.
Sample Output
*A:Performance# show router status
================================================================
Router Status (Router: Base)
================================================================
Admin State Oper State
----------------------------------------------------------------
Router Up Up
OSPFv2-0 Up Up
OSPFv2-2 Down Down
RIP Not configured Not configured
RIP-NG Not configured Not configured
ISIS-0 Up Up
ISIS-1024 Down Down
MPLS Down Down
RSVP Down Down
LDP Up Down
BGP Up Down
IGMP
MLD
PIM
PIMv4
PIMv6
OSPFv3
MSDP
Max IPv4 Routes No Limit
Max IPv6 Routes No Limit
Total IPv4 Routes 0
Total IPv6 Routes 0
Max Multicast Routes No Limit
Total IPv4 Mcast Routes PIM not configured
Total IPv6 Mcast Routes PIM not configured
ECMP Max Routes 1
Mcast Info Policy default
Triggered Policies No
LDP Shortcut Disabled
Single SFM Overload Disabled
IP Fast Reroute Disabled
ICMP Tunneling Disabled
Reassembly ISA-BB group Not configured
ICMP Tunneling Disabled
Ipv6 Nbr Reachab. time Not configured 30
IPv6 Nbr stale time (s) 14400
VPRN Local TTL Propagate vc-only
VPRN Transit TTL Propag* vc-only
Label Route Local TTL P* none
Label Route Transit TTL* none
LSR Label Route TTL Pro* none
===============================================================================
* indicates that the corresponding row element may have been truncated.
*B:bkvm31#
VPRN TTL Propagation and ICMP Tunneling—The following output is an example of TTL propagation and ICMP tunneling configurations in a VPRN service. The ttl-propagation has been specified as local and all for VPRN service 5001.
Sample Output
*A:Dut-A# configure service vprn 5001 ttl-propagate local all
*A:Dut-A# show router 5001 status
===============================================================================
Router Status (Service: 5001)
===============================================================================
Admin State Oper State
-------------------------------------------------------------------------------
Router Up Up
OSPFv2 Not configured Not configured
RIP Not configured Not configured
RIP-NG Not configured Not configured
ISIS Not configured Not configured
MPLS Not configured Not configured
RSVP Not configured Not configured
LDP Not configured Not configured
BGP Not configured Not configured
IGMP Not configured Not configured
MLD Not configured Not configured
PIM Not configured Not configured
PIMv4 Not configured Not configured
PIMv6 Not configured Not configured
OSPFv3 Not configured Not configured
MSDP Not configured Not configured
Max IPv4 Routes No Limit
Max IPv6 Routes No Limit
Total IPv4 Routes 2
Total IPv6 Routes 2
Max Multicast Routes No Limit
Total IPv4 Mcast Routes PIM not configured
Total IPv6 Mcast Routes PIM not configured
ECMP Max Routes 1
Mcast Info Policy default
Triggered Policies No
GRT Lookup Disabled
Local Management Disabled
Single SFM Overload Disabled
IP Fast Reroute Disabled
ICMP Tunneling Disabled
Reassembly ISA-BB group Not configured
ICMP Tunneling Disabled
Ipv6 Nbr Reachab. time Not configured 30
VPRN Local TTL Propagate all
VPRN Transit TTL Propag* inherit (vc-only)
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-A#
tms
Syntax
tms routes
Context
show>router router-instance
Description
This command displays Threat Management Services (TMS) related information. The router instance must be specified.
Output
The following output is an example of TMS information.
Sample Output
show router <router-instance> tms routes
-------------------------------------------
*A:Dut-C# show router 1 tms routes
===============================================================================
TMS Routes (IPv4)
===============================================================================
Status Network Next Hop[Interface Name]
-------------------------------------------------------------------------------
Active 100.0.0.1/32 mda-2-1
Inactive 101.0.0.1/32 mda-2-1
Inactive 102.0.0.1/32 mda-2-1
Inactive 103.0.0.1/32 mda-2-1
Inactive 104.0.0.1/32 mda-2-1
Inactive 105.0.0.1/32 mda-2-1
Inactive 106.0.0.1/32 mda-2-1
Inactive 107.0.0.1/32 mda-2-1
Inactive 108.0.0.1/32 mda-2-1
Inactive 109.0.0.1/32 mda-2-1
-------------------------------------------------------------------------------
No. of Routes: 10
===============================================================================
*A:Dut-C# show router 1 tms routes
===============================================================================
TMS Routes (IPv4)
===============================================================================
Status Network Next Hop[Interface Name]
-------------------------------------------------------------------------------
Active 100.0.0.1/32 mda-2-1
-------------------------------------------------------------------------------
No. of Routes: 1
===============================================================================
tunnel-table
Syntax
tunnel-table summary [ipv4 | ipv6]
tunnel-table [protocol protocol] {ipv4 | ipv6}
tunnel-table [ip-prefix[/mask]] [alternative] [ipv4 | ipv6] [detail]
tunnel-table mpls-tp
tunnel-table [ip-prefix[/mask]] protocol protocol [detail]
tunnel-table [ip-prefix[/mask]] sdp sdp-id
Context
show>router
Description
This command displays tunnel table information. Auto-bind GRE tunnels are not displayed in show command output. GRE tunnels are not the same as SDP tunnels that use the GRE encapsulation type. When the auto-bind command is used when configuring a VPRN service, it means the MP-BGP NH resolution is referring to the core routing instance for IP reachability. For a VPRN service this object specifies the lookup to be used by the routing instance if no SDP to the destination exists.
Parameters
ip-address[/mask]—
displays the specified tunnel table’s destination IP address and mask
protocol protocol —
displays protocol information
Values—
bgp, ldp, rsvp, sdp, ospf, isis, sr-te, fpe
sdp sdp-id—
displays information pertaining to the specified SDP
Values—
1 to 17407
summary—
displays summary tunnel table information
detail—
displays detailed tunnel table information
alternative—
displays Backup Route details
mpls-tp—
displays MPLS-TP information
ipv4—
displays information for IPv4 entries only
ipv6—
displays information for IPv6 entries only
Output
Tunnel Table Output — The following output is an example of tunnel table information, and Table 32 describes the fields.
Sample Output
*A:Dut-D>config>service>vpls# show router tunnel-table sdp 17407
=======================================================================
Tunnel Table (Router: Base)
===============================================================================
Destination Owner Encap TunnelId Pref Nexthop Metric
-----------------------------------------------------------------------
127.0.68.0/32 sdp MPLS 17407 5 127.0.68.0 0
=======================================================================
*A:Dut-D# show service id 1 sdp 17407:4294967294 detail
=======================================================================
Service Destination Point (Sdp Id : 17407:4294967294) Details
=======================================================================
-------------------------------------------------------------------------------
Sdp Id 17407:4294967294 -(not applicable)
-----------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 17407:4294967294 Type : VplsPmsi
Split Horiz Grp : (Not Specified)
VC Type : Ether VC Tag : n/a
Admin Path MTU : 9194 Oper Path MTU : 9194
Delivery : MPLS
Far End : not applicable
Tunnel Far End : n/a LSP Types : None
Hash Label : Disabled Hash Lbl Sig Cap : Disabled
Oper Hash Label : Disabled
Admin State : Up Oper State : Up
Acct. Pol : None Collect Stats : Disabled
Ingress Label : 0 Egress Label : 3
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
Admin ControlWord : Not Preferred Oper ControlWord : False
Last Status Change : 12/14/2012 12:42:22 Signaling : None
Last Mgmt Change : 12/14/2012 12:42:19 Force Vlan-Vc : Disabled
Endpoint : N/A Precedence : 4
PW Status Sig : Enabled
Class Fwding State : Down
Flags : None
Time to RetryReset : never Retries Left : 3
Mac Move : Blockable Blockable Level : Tertiary
Local Pw Bits : None
Peer Pw Bits : None
Peer Fault Ip : None
Peer Vccv CV Bits : None
Peer Vccv CC Bits : None
Application Profile: None
Max Nbr of MAC Addr: No Limit Total MAC Addr : 0
Learned MAC Addr : 0 Static MAC Addr : 0
MAC Learning : Enabled Discard Unkwn Srce: Disabled
MAC Aging : Enabled
BPDU Translation : Disabled
L2PT Termination : Disabled
MAC Pinning : Disabled
Ignore Standby Sig : False Block On Mesh Fail: False
Oper Group : (none) Monitor Oper Grp : (none)
Rest Prot Src Mac : Disabled
Auto Learn Mac Prot: Disabled RestProtSrcMacAct : Disable
Ingress Qos Policy : (none) Egress Qos Policy : (none)
Ingress FP QGrp : (none) Egress Port QGrp : (none)
Ing FP QGrp Inst : (none) Egr Port QGrp Inst: (none)
-----------------------------------------------------------------------
ETH-CFM SDP-Bind specifics
-----------------------------------------------------------------------
V-MEP Filtering : Disabled
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Max Drop Count : 3 Hold Down Time : 10
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
I. Fwd. Octs. : 0 I. Dro. Octs. : 0
E. Fwd. Pkts. : 2979761 E. Fwd. Octets : 476761760
-----------------------------------------------------------------------
Control Channel Status
-----------------------------------------------------------------------
PW Status : disabled Refresh Timer : <none>
Peer Status Expire : false Clear On Timeout : true
MCAC Policy Name :
MCAC Max Unconst BW: no limit MCAC Max Mand BW : no limit
MCAC In use Mand BW: 0 MCAC Avail Mand BW: unlimited
MCAC In use Opnl BW: 0 MCAC Avail Opnl BW: unlimited
-----------------------------------------------------------------------
RSVP/Static LSPs
-----------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
-----------------------------------------------------------------------
Class-based forwarding :
-----------------------------------------------------------------------
Class forwarding : Disabled EnforceDSTELspFc : Disabled
Default LSP : Uknwn Multicast LSP : None
=======================================================================
FC Mapping Table
=======================================================================
FC Name LSP Name
-----------------------------------------------------------------------
No FC Mappings
-----------------------------------------------------------------------
Stp Service Destination Point specifics
-----------------------------------------------------------------------
Stp Admin State : Down Stp Oper State : Down
Core Connectivity : Down
Port Role : N/A Port State : Forwarding
Port Number : 0 Port Priority : 128
Port Path Cost : 10 Auto Edge : Enabled
Admin Edge : Disabled Oper Edge : N/A
Link Type : Pt-pt BPDU Encap : Dot1d
Root Guard : Disabled Active Protocol : N/A
Last BPDU from : N/A
Designated Bridge : N/A Designated Port Id: N/A
Fwd Transitions : 0 Bad BPDUs rcvd : 0
Cfg BPDUs rcvd : 0 Cfg BPDUs tx : 0
TCN BPDUs rcvd : 0 TCN BPDUs tx : 0
TC bit BPDUs rcvd : 0 TC bit BPDUs tx : 0
RST BPDUs rcvd : 0 RST BPDUs tx : 0
-----------------------------------------------------------------------
Number of SDPs : 1
-----------------------------------------------------------------------
=======================================================================
*A:Dut-C# show router tunnel-table sdp 17407
========================================================================
Tunnel Table (Router: Base)
========================================================================
Destination Owner Encap TunnelId Pref Nexthop Metric
------------------------------------------------------------------------
127.0.68.0/32 sdp MPLS 17407 5 127.0.68.0 0
========================================================================
A:ALA-A>config>service# show router tunnel-table ===============================================================================
Tunnel Table ==================================================================
DestinationOwnerEncapTunnel IdPrefNexthopMetric
-------------------------------------------------------------------------------
10.0.0.1/32 sdp GRE 10 5 10.0.0.1 0
10.0.0.1/32 sdp GRE 21 5 10.0.0.1 0
10.0.0.1/32 sdp GRE 31 5 10.0.0.1 0
10.0.0.1/32 sdp GRE 41 5 10.0.0.1 0
===============================================================================
A:ALA-A>config>service#
A:ALA-A>config>service# show router tunnel-table summary
===============================================================================
Tunnel Table Summary (Router: Base)
===============================================================================
Active Available
-------------------------------------------------------------------------------
LDP 1 1
SDP 1 1
===============================================================================
A:ALA-A>config>service#
A:Dut-C# show router tunnel-table
===============================================================================
Tunnel Table (Router: Base)
===============================================================================
Destination Owner Encap TunnelId Pref Nexthop Metric
-------------------------------------------------------------------------------
4.0.0.1/32 isis (0) MPLS 524309 11 1.3.4.4 10
10.20.1.2/32 isis (0) MPLS 524312 11 1.2.3.2 10
10.20.1.4/32 isis (0) MPLS 524310 11 1.3.4.4 10
10.20.1.5/32 isis (0) MPLS 524311 11 1.2.3.2 20
-------------------------------------------------------------------------------
Flags: B = BGP backup route available
E = inactive best-
external BGP route =================================================================
==============
A:Dut-C#
*A:Dut-C> show router tunnel-table
===============================================================================
IPv4 Tunnel Table (Router: Base)
===============================================================================
Destination Owner Encap TunnelId Pref Nexthop Metric
-------------------------------------------------------------------------------
10.20.1.1/32 ldp MPLS 65546 9 10.10.2.1 10
10.20.1.2/32 ldp MPLS 65545 9 10.10.12.2 3
10.20.1.2/32 isis (0) MPLS 524318 11 10.10.12.2 3
10.20.1.4/32 isis (0) MPLS 524316 11 10.10.11.4 10
10.20.1.5/32 ldp MPLS 65547 9 10.10.5.5 10
10.20.1.5/32 isis (0) MPLS 524315 11 10.10.5.5 10
10.20.1.6/32 isis (0) MPLS 524317 11 10.10.11.4 20
-------------------------------------------------------------------------------
Flags: B = BGP backup route available
E = inactive best-external BGP route
===============================================================================
A:Dut-C# show router tunnel-table detail
===============================================================================
Tunnel Table (Router: Base)
===============================================================================
Destination : 7.1.126.2/32
NextHop : 110.20.1.5
Tunnel Flags : is-over-tunnel
Age : 01h27m59s
CBF Classes : (Not Specified)
Owner : ldp Encap : MPLS
Tunnel ID : 66389 Preference : 9
Tunnel Label : 243909 Tunnel Metric : 1
Tunnel MTU : 9186
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Destination : 10.20.1.22/32
NextHop : 120.1.17.7
Tunnel Flags : (Not Specified)
Age : 01h29m15s
CBF Classes : (Not Specified)
Owner : rsvp Encap : MPLS
Tunnel ID : 13 Preference : 7
Tunnel Label : 249809 Tunnel Metric : 2000
Tunnel MTU : 9190
LSP ID : 44032 Bypass Label : 0
LSP Bandwidth : 0 LSP Weight : 0
-------------------------------------------------------------------------------
Destination : 10.20.1.22/32
NextHop : 120.1.18.7
Tunnel Flags : exclude-for-lfa
Age : 00h01m47s
CBF Classes : default-lsp
Owner : rsvp Encap : MPLS
Tunnel ID : 243 Preference : 7
Tunnel Label : 249872 Tunnel Metric : 2000
Tunnel MTU : 9190
LSP ID : 44032 Bypass Label : 0
LSP Bandwidth : 0 LSP Weight : 0
-------------------------------------------------------------------------------
Destination : 10.20.1.22/32
NextHop : 120.1.18.7
Tunnel Flags : exclude-for-lfa
Age : 00h00m38s
CBF Classes : af l1 ef nc
Owner : rsvp Encap : MPLS
Tunnel ID : 244 Preference : 7
Tunnel Label : 249905 Tunnel Metric : 2000
Tunnel MTU : 9190
LSP ID : 45568 Bypass Label : 0
LSP Bandwidth : 0 LSP Weight : 0
-------------------------------------------------------------------------------
Destination : 10.20.1.22/32
NextHop : 120.1.17.7
Tunnel Flags : exclude-for-lfa
Age : 00h00m21s
CBF Classes : h2
Owner : rsvp Encap : MPLS
Tunnel ID : 245 Preference : 7
Tunnel Label : 250063 Tunnel Metric : 2000
Tunnel MTU : 9190
LSP ID : 39936 Bypass Label : 0
LSP Bandwidth : 0 LSP Weight : 0
-------------------------------------------------------------------------------
Destination : 10.20.1.22/32
NextHop : 120.1.18.7
Tunnel Flags : exclude-for-lfa
Age : 01h29m40s
CBF Classes : ef default-lsp
Owner : rsvp Encap : MPLS
Tunnel ID : 246 Preference : 7
Tunnel Label : 250024 Tunnel Metric : 2000
Tunnel MTU : 9190
LSP ID : 38400 Bypass Label : 0
LSP Bandwidth : 0 LSP Weight : 0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Destination : 211.1.0.254/32
NextHop : 110.20.1.4
Tunnel Flags : is-over-tunnel
Age : 01h28m38s
CBF Classes : (Not Specified)
Owner : bgp Encap : MPLS
Tunnel ID : 264115 Preference : 12
Tunnel Label : 260512 Tunnel Metric : 1000
Tunnel MTU : 9186
-------------------------------------------------------------------------------
Number of tunnel-table entries : 2866
Number of tunnel-table entries with LFA : 0
===============================================================================
A:Dut-C#
*B:Dut-B>config>router>mpls>lsp# show router tunnel-table ipv6 protocol isis
===============================================================================
IPv6 Tunnel Table (Router: Base)
===============================================================================
Destination Owner Encap TunnelId Pref
Nexthop Metric
-------------------------------------------------------------------------------
2001::a14:103/128 isis (0) MPLS 524355 11
fe80::c7b:1ff:fe01:1-"B_to_D" 20
2001::a14:104/128 isis (0) MPLS 524354 11
fe80::c7b:1ff:fe01:1-"B_to_D" 10
2001::a14:105/128 isis (0) MPLS 524356 11
fe80::c7f:2ff:fe01:1-"B_to_E" 10
2001::a14:106/128 isis (0) MPLS 524357 11
fe80::c7b:1ff:fe01:1-"B_to_D" 20
-------------------------------------------------------------------------------
Flags: B = BGP backup route available
E = inactive best-external BGP route
===============================================================================
*B:Dut-B>config>router>mpls>lsp# show router tunnel-table ipv6 detail
===============================================================================
Tunnel Table (Router: Base)
===============================================================================
Destination : 2001::a14:103/128
NextHop : 2001::a14:103
Tunnel Flags : (Not Specified)
Age : 00h02m20s
CBF Classes : (Not Specified)
Owner : sdp Encap : MPLS
Tunnel ID : 230 Preference : 5
Tunnel Label : - Tunnel Metric : 0
Tunnel MTU : 1578 Max Label Stack : 1
-------------------------------------------------------------------------------
Destination : 2001::a14:103/128
NextHop : fe80::c7b:1ff:fe01:1-"B_to_D"
Tunnel Flags : (Not Specified)
Age : 00h02m15s
CBF Classes : (Not Specified)
Owner : ldp Encap : MPLS
Tunnel ID : 65567 Preference : 9
Tunnel Label : 262136 Tunnel Metric : 200
Tunnel MTU : 1582 Max Label Stack : 1
-------------------------------------------------------------------------------
Destination : 2001::a14:103/128
NextHop : fe80::c7b:1ff:fe01:1-"B_to_D"
Tunnel Flags : exclude-for-igpshortcuts
Age : 00h02m23s
CBF Classes : (Not Specified)
Owner : isis (0) Encap : MPLS
Tunnel ID : 524355 Preference : 11
Tunnel Label : 18563 Tunnel Metric : 20
Tunnel MTU : 1582 Max Label Stack : 1
-------------------------------------------------------------------------------
Destination : 2001::a14:104/128
NextHop : fe80::c7b:1ff:fe01:1-"B_to_D"
Tunnel Flags : (Not Specified)
Age : 00h02m20s
CBF Classes : (Not Specified)
Owner : ldp Encap : MPLS
Tunnel ID : 65568 Preference : 9
Tunnel Label : 262143 Tunnel Metric : 100
Tunnel MTU : 1582 Max Label Stack : 1
-------------------------------------------------------------------------------
Destination : 2001::a14:104/128
NextHop : fe80::c7b:1ff:fe01:1-"B_to_D"
Tunnel Flags : exclude-for-igpshortcuts
Age : 00h02m32s
CBF Classes : (Not Specified)
Owner : isis (0) Encap : MPLS
Tunnel ID : 524354 Preference : 11
Tunnel Label : 18564 Tunnel Metric : 10
Tunnel MTU : 1582 Max Label Stack : 1
-------------------------------------------------------------------------------
Destination : 2001::a14:105/128
NextHop : fe80::c7f:2ff:fe01:1-"B_to_E"
Tunnel Flags : (Not Specified)
Age : 00h02m15s
CBF Classes : (Not Specified)
Owner : ldp Encap : MPLS
Tunnel ID : 65569 Preference : 9
Tunnel Label : 262143 Tunnel Metric : 100
Tunnel MTU : 1582 Max Label Stack : 1
-------------------------------------------------------------------------------
Destination : 2001::a14:105/128
NextHop : fe80::c7f:2ff:fe01:1-"B_to_E"
Tunnel Flags : exclude-for-igpshortcuts
Age : 00h02m32s
CBF Classes : (Not Specified)
Owner : isis (0) Encap : MPLS
Tunnel ID : 524356 Preference : 11
Tunnel Label : 18565 Tunnel Metric : 10
Tunnel MTU : 1582 Max Label Stack : 1
-------------------------------------------------------------------------------
Destination : 2001::a14:106/128
NextHop : fe80::c7b:1ff:fe01:1-"B_to_D"
Tunnel Flags : (Not Specified)
Age : 00h02m16s
CBF Classes : (Not Specified)
Owner : ldp Encap : MPLS
Tunnel ID : 65570 Preference : 9
Tunnel Label : 262133 Tunnel Metric : 200
Tunnel MTU : 1582 Max Label Stack : 1
-------------------------------------------------------------------------------
Destination : 2001::a14:106/128
NextHop : fe80::c7b:1ff:fe01:1-"B_to_D"
Tunnel Flags : exclude-for-igpshortcuts
Age : 00h02m24s
CBF Classes : (Not Specified)
Owner : isis (0) Encap : MPLS
Tunnel ID : 524357 Preference : 11
Tunnel Label : 18566 Tunnel Metric : 20
Tunnel MTU : 1582 Max Label Stack : 1
-------------------------------------------------------------------------------
Number of tunnel-table entries : 9
Number of tunnel-table entries with LFA : 0
===============================================================================
Table 32: Tunnel Table Fields
Label | Description |
Destination | The route’s destination address and mask. |
Owner | Specifies the tunnel owner. |
Encap | Specifies the tunnel’s encapsulation type. |
Tunnel ID | Specifies the tunnel (SDP) identifier. |
Pref | Specifies the route preference for routes learned from the configured peer(s). |
Nexthop | The next hop for the route’s destination. |
Metric | The route metric value for the route. |
CBF Classes | The forwarding classes and/or default-lsp option assigned to this tunnel |
L2TP Show Commands
The following command outputs are examples only; actual displays may differ depending on supported functionality and user configuration.
l2tp
Syntax
l2tp
Context
show>router
Description
This command enables the context to display L2TP related information.
eth-tunnel
Syntax
eth-tunnel [group tunnel-group-name [vc-id vc-id]]
Context
show>router>l2tp
Description
This command displays information about configured L2TPv3 Ethernet tunnels. These Ethernet tunnels are the L2TPv3 sessions setup between the local private L2 SAP and the far end device.
If this command is executed without any parameters, then a list of all configured Ethernet tunnels are displayed.
If this command is executed with a tunnel group name or a VC-ID, then a detailed view of the associated Ethernet tunnel is displayed.
Parameters
tunnel-group-name—
Specifies the configured tunnel group name used for the associated Ethernet tunnel
vc-id—
Specifies the VC-ID for the L2TPv3 Ethernet tunnel
Values—
0 to 4294967295
Output
The following output is an example of L2TPv3 Ethernet tunnel information
Sample Output
A:Dut-A# show router 200 l2tp eth-tunnel
===============================================================================
L2TPv3 Ethernet Tunnel Summary
===============================================================================
Tunnel Group name VC ID
-------------------------------------------------------------------------------
v3-group-1 100
-------------------------------------------------------------------------------
No. of ethernet tunnels: 1
===============================================================================
A:Dut-A# show router 200 l2tp eth-tunnel group "v3-group-1"
===============================================================================
L2TPv3 Ethernet Tunnel Status
===============================================================================
Group Name : v3-group-1
VC ID : 100
Local Conn ID : 221122308
Ctrl Conn ID : 221118464
Matches Cfg : true
Down Reason : N/A
Reconnect Time (s) : N/A
Remaining Time (s) : N/A
SAP ID : tunnel-1.private:100
SAP Service ID : 100
-------------------------------------------------------------------------------
No. of ethernet tunnels: 1
===============================================================================
group
Syntax
group [tunnel-group-name [statistics]]
Context
show>router>l2tp
Description
This command displays L2TP group operational information.
Parameters
tunnel-group-name—
displays information for the specified tunnel group
statistics—
displays statistics for the specified tunnel group
Output
The following output is an example of L2TP group operational information.
Sample Output
*A:Dut-C# show router l2tp group
===============================================================================
L2TP Groups
===============================================================================
Group Name Ses Limit Ses Assign State Tun Active Ses Active
Tun Total Ses Total
-------------------------------------------------------------------------------
isp1.group-1
131071 existingFirst active 1 1
1 1
isp1.group-2
131071 weighted active 2 5
3 8
-------------------------------------------------------------------------------
No. of L2TP Groups: 2
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp group isp1.group-2
===============================================================================
Group Name: isp1.group-2
===============================================================================
Conn ID Loc-Tu-ID Rem-Tu-ID State Ses Active
Group Ses Total
Assignment
-------------------------------------------------------------------------------
143523840 2190 17525 established 2
isp1.group-2 3
isp1.tunnel-3
236912640 3615 58919 closedByPeer 0
isp1.group-2 2
isp1.tunnel-2
658178048 10043 33762 draining 3
isp1.group-2 3
isp1.tunnel-2
-------------------------------------------------------------------------------
No. of tunnels: 3
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp group isp1.group-2 statistics
Group Name: isp1.group-2
-------------------------------------------------------------------------------
Attempts Failed Failed-Aut Active Total
-------------------------------------------------------------------------------
Tunnels 3 0 0 2 3
Sessions 8 0 N/A 5 8
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Pkt-Ctl Pkt-Err Octets
-------------------------------------------------------------------------------
Rx 51 0 1224
Tx 51 0 2796
-------------------------------------------------------------------------------
*A:Dut-C#
peer
Syntax
peer ip-address [statistics] [{udp-port port | ip}]
peer [draining] [{blacklisted | selectable | unreachable}]
Context
show>router>l2tp
Description
This command displays information regarding all configured L2TP peers.
If this command is executed without specifying a peer IP address, then a list of all L2TP peers are listed along with the type of transport used and statistics on the total number of tunnels and sessions, as well as the number of active tunnels and sessions.
If this command is executed with a specific peer IP address, than a detailed view for that peer is displayed.
Parameters
ip-address—
Specifies the L2TP peer address
statistics—
displays the statistics for the given IP address
port—
Specifies the UDP port for the L2TP peer. This parameter is only supported with L2TPv2 peers.
ip—
Displays peers using IP transport
draining—
Displays only peers with draining tunnels
blacklisted—
Displays peers that are blacklisted
selectable—
Displays peers that are selectable
unreachable—
Displays peers that are deemed unreachable
Output
The following output is an example of L2TP peer operational information.
Sample Output
A:Dut-A# show router 200 l2tp peer
===============================================================================
L2TP Peers
===============================================================================
Peer IP Port Tun Active Ses Active
Drain Reachability Tun Total Ses Total
-------------------------------------------------------------------------------
10.1.1.2 ip 1 1
1 1
-------------------------------------------------------------------------------
No. of peers: 1
===============================================================================
A:Dut-A# show router 200 l2tp peer 10.1.1.2 ip
===============================================================================
Peer IP: 10.1.1.2
===============================================================================
Roles capab/actual: LAC LNS / - - Draining : false
Tunnels : 1 Tunnels Active : 1
Sessions : 1 Sessions Active : 1
Reachability : reachable Time Unreachable : N/A
===============================================================================
Conn ID Loc-Tu-ID Rem-Tu-ID State Blacklist-state Ses Active
Group Ses Total
Assignment
-------------------------------------------------------------------------------
221118464 3374 0 established not-blacklisted 1
v3-group-1 1
tun-1-l2tp-v3
-------------------------------------------------------------------------------
No. of tunnels: 1
===============================================================================
*A:Fden-Dut2-BSA2# show router l2tp peer 10.0.0.1 statistics
===============================================================================
Peer IP: 10.0.0.1
===============================================================================
tunnels : 1
tunnels active : 1
sessions : 1
sessions active : 1
rx ctrl octets : 541
rx ctrl packets : 5
tx ctrl octets : 272
tx ctrl packets : 5
tx error packets : 0
rx error packets : 0
rx accepted msg : 4
rx duplicate msg : 0
rx out of window msg : 0
acceptedMsgType
StartControlConnectionRequest : 1
StartControlConnectionConnected : 1
IncomingCallRequest : 1
IncomingCallConnected : 1
ZeroLengthBody : 1
originalTransmittedMsgType
StartControlConnectionReply : 1
IncomingCallReply : 1
ZeroLengthBody : 3
last cleared time : N/A
===============================================================================
session
Syntax
session connection-id connection-id [detail]
session [detail] [session-id session-id (v2)] [state session-state] [peer ip-address] [group group-name] [assignment-id assignment-id] [local-name local-host-name] [remote-name remote-host-name] [tunnel-id tunnel-id (v2)]
session [detail] [state session-state] [peer ip-address] [group group-name] [assignment-id assignment-id] [local-name local-host-name] [remote-name remote-host-name] [control-connection-id connection-id (v3)]
Context
show>router>l2tp
Description
This command displays L2TP session operational information.
Parameters
connection-id connection-id—
specifies the identification number for a Layer Two Tunneling Protocol connection
Values—
1 to 429496729
detail—
displays detailed L2TP session information
session-id session-id (v2)—
specifies the identification number for a Layer Two Tunneling Protocol session
Values—
1 to 65535
state session-state—
specifies the values to identify the operational state of the L2TP session
Values—
closed, closed-by-peer, established, idle, wait-reply, wait-tunnel
peer ip-address—
specifies the IP address of the peer
Values—
The following values apply to the 7750 SR:
ipv4-address | a.b.c.d (host bits must be 0) |
ipv6-address | x:x:x:x:x:x:x:x[-interface] |
x:x:x:x:x:x:d.d.d.d[-interface] | |
x: [0 to FFFF]H | |
d: [0 to 255]D | |
interface: 32 characters maximum, mandatory for link local addresses |
Values—
The following values apply to the 7450 ESS:
ipv4-address: a.b.c.d (host bits must be 0)
group group-name—
specifies a string to identify a Layer Two Tunneling Protocol Tunnel group
assignment-id assignment-id—
specifies a string that distinguishes this Layer Two Tunneling Protocol tunnel
local-name local-host-name—
specifies the host name used by this system during the authentication phase of tunnel establishment
remote-name remote-host-name—
specifies a string that is compared to the host name used by the tunnel peer during the authentication phase of tunnel establishment
tunnel-id tunnel-id (v2)—
specifies the local identifier of this Layer Two Tunneling Protocol tunnel, when L2TP version 2 is used
Values—
1 to 65535
control-connection-id connection-id (v3)—
specifies an identification number for a Layer Two Tunneling Protocol session
Values—
1 to 429496729
Output
The following output is an example of L2TP session operational information.
Sample Output
*A:Dut-C# show router l2tp session
===============================================================================
L2TP Session Summary
===============================================================================
ID Control Conn ID Tunnel-ID Session-ID State
-------------------------------------------------------------------------------
143524786 143523840 2190 946 established
143526923 143523840 2190 3083 established
143531662 143523840 2190 7822 closed
236926987 236912640 3615 14347 closed
236927915 236912640 3615 15275 closed
379407426 379387904 5789 19522 established
658187773 658178048 10043 9725 established
658198275 658178048 10043 20227 established
658210606 658178048 10043 32558 established
-------------------------------------------------------------------------------
No. of sessions: 9
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp session state established
===============================================================================
L2TP Session Summary
===============================================================================
ID Control Conn ID Tunnel-ID Session-ID State
-------------------------------------------------------------------------------
143524786 143523840 2190 946 established
143526923 143523840 2190 3083 established
379407426 379387904 5789 19522 established
658187773 658178048 10043 9725 established
658198275 658178048 10043 20227 established
658210606 658178048 10043 32558 established
-------------------------------------------------------------------------------
No. of sessions: 6
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp session state closed detail
===============================================================================
L2TP Session Status
===============================================================================
Connection ID : 143531662
State : closed
Tunnel Group : isp1.group-2
Assignment ID : isp1.tunnel-3
Error Message : Terminated by PPPoE: RX PADT
Control Conn ID : 143523840 Remote Conn ID : 1148557524
Tunnel ID : 2190 Remote Tunnel ID : 17525
Session ID : 7822 Remote Session ID : 39124
Time Started : 04/17/2009 18:44:37
Time Established : 04/17/2009 18:44:37 Time Closed : 04/17/2009 18:44:50
CDN Result : generalError General Error : noError
-------------------------------------------------------------------------------
===============================================================================
L2TP Session Status
===============================================================================
Connection ID : 236926987
State : closed
Tunnel Group : isp1.group-2
Assignment ID : isp1.tunnel-2
Error Message : tunnel was closed
Control Conn ID : 236912640 Remote Conn ID : 3861360381
Tunnel ID : 3615 Remote Tunnel ID : 58919
Session ID : 14347 Remote Session ID : 44797
Time Started : 04/17/2009 18:41:55
Time Established : 04/17/2009 18:41:55 Time Closed : 04/17/2009 18:43:20
CDN Result : generalError General Error : noError
-------------------------------------------------------------------------------
===============================================================================
L2TP Session Status
===============================================================================
Connection ID : 236927915
State : closed
Tunnel Group : isp1.group-2
Assignment ID : isp1.tunnel-2
Error Message : tunnel was closed
Control Conn ID : 236912640 Remote Conn ID : 3861317210
Tunnel ID : 3615 Remote Tunnel ID : 58919
Session ID : 15275 Remote Session ID : 1626
Time Started : 04/17/2009 18:41:03
Time Established : 04/17/2009 18:41:03 Time Closed : 04/17/2009 18:43:20
CDN Result : generalError General Error : noError
-------------------------------------------------------------------------------
No. of sessions: 3
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp session session-id 946
===============================================================================
L2TP Session Summary
===============================================================================
ID Control Conn ID Tunnel-ID Session-ID State
-------------------------------------------------------------------------------
143524786 143523840 2190 946 established
-------------------------------------------------------------------------------
No. of sessions: 1
===============================================================================
*A:Dut-C# show router l2tp session connection-id 143524786 detail
===============================================================================
L2TP Session Status
===============================================================================
Connection ID : 143524786
State : established
Tunnel Group : isp1.group-2
Assignment ID : isp1.tunnel-3
Error Message : N/A
Control Conn ID : 143523840 Remote Conn ID : 1148528691
Tunnel ID : 2190 Remote Tunnel ID : 17525
Session ID : 946 Remote Session ID : 10291
Time Started : 04/17/2009 18:42:01
Time Established : 04/17/2009 18:42:01 Time Closed : N/A
CDN Result : noError General Error : noError
-------------------------------------------------------------------------------
*A:Dut-C#
*A:Dut-C# show router l2tp session group isp1.group-2
===============================================================================
L2TP Session Summary
===============================================================================
ID Control Conn ID Tunnel-ID Session-ID State
-------------------------------------------------------------------------------
143524786 143523840 2190 946 established
143526923 143523840 2190 3083 established
143531662 143523840 2190 7822 closed
236926987 236912640 3615 14347 closed
236927915 236912640 3615 15275 closed
658187773 658178048 10043 9725 established
658198275 658178048 10043 20227 established
658210606 658178048 10043 32558 established
-------------------------------------------------------------------------------
No. of sessions: 8
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp session tunnel-id 2190 state closed detail
===============================================================================
L2TP Session Status
===============================================================================
Connection ID : 143531662
State : closed
Tunnel Group : isp1.group-2
Assignment ID : isp1.tunnel-3
Error Message : Terminated by PPPoE: RX PADT
Control Conn ID : 143523840 Remote Conn ID : 1148557524
Tunnel ID : 2190 Remote Tunnel ID : 17525
Session ID : 7822 Remote Session ID : 39124
Time Started : 04/17/2009 18:44:37
Time Established : 04/17/2009 18:44:37 Time Closed : 04/17/2009 18:44:50
CDN Result : generalError General Error : noError
-------------------------------------------------------------------------------
No. of sessions: 1
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp session assignment-id isp1.tunnel-2
===============================================================================
L2TP Session Summary
===============================================================================
ID Control Conn ID Tunnel-ID Session-ID State
-------------------------------------------------------------------------------
236926987 236912640 3615 14347 closed
236927915 236912640 3615 15275 closed
658187773 658178048 10043 9725 established
658198275 658178048 10043 20227 established
658210606 658178048 10043 32558 established
-------------------------------------------------------------------------------
No. of sessions: 5
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp session assignment-id isp1.tunnel-2 state established
===============================================================================
L2TP Session Summary
===============================================================================
ID Control Conn ID Tunnel-ID Session-ID State
-------------------------------------------------------------------------------
658187773 658178048 10043 9725 established
658198275 658178048 10043 20227 established
658210606 658178048 10043 32558 established
-------------------------------------------------------------------------------
No. of sessions: 3
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp session control-connection-id 658178048
===============================================================================
L2TP Session Summary
===============================================================================
ID Control Conn ID Tunnel-ID Session-ID State
-------------------------------------------------------------------------------
658187773 658178048 10043 9725 established
658198275 658178048 10043 20227 established
658210606 658178048 10043 32558 established
-------------------------------------------------------------------------------
No. of sessions: 3
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp session peer 10.10.20.100
===============================================================================
L2TP Session Summary
===============================================================================
ID Control Conn ID Tunnel-ID Session-ID State
-------------------------------------------------------------------------------
236926987 236912640 3615 14347 closed
236927915 236912640 3615 15275 closed
658187773 658178048 10043 9725 established
658198275 658178048 10043 20227 established
658210606 658178048 10043 32558 established
-------------------------------------------------------------------------------
No. of sessions: 5
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp session peer 10.10.20.100 state closed detail
===============================================================================
L2TP Session Status
===============================================================================
Connection ID : 236926987
State : closed
Tunnel Group : isp1.group-2
Assignment ID : isp1.tunnel-2
Error Message : tunnel was closed
Control Conn ID : 236912640 Remote Conn ID : 3861360381
Tunnel ID : 3615 Remote Tunnel ID : 58919
Session ID : 14347 Remote Session ID : 44797
Time Started : 04/17/2009 18:41:55
Time Established : 04/17/2009 18:41:55 Time Closed : 04/17/2009 18:43:20
CDN Result : generalError General Error : noError
-------------------------------------------------------------------------------
===============================================================================
L2TP Session Status
===============================================================================
Connection ID : 236927915
State : closed
Tunnel Group : isp1.group-2
Assignment ID : isp1.tunnel-2
Error Message : tunnel was closed
Control Conn ID : 236912640 Remote Conn ID : 3861317210
Tunnel ID : 3615 Remote Tunnel ID : 58919
Session ID : 15275 Remote Session ID : 1626
Time Started : 04/17/2009 18:41:03
Time Established : 04/17/2009 18:41:03 Time Closed : 04/17/2009 18:43:20
CDN Result : generalError General Error : noError
-------------------------------------------------------------------------------
No. of sessions: 2
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp session local-name lac1.wholesaler.com
===============================================================================
L2TP Session Summary
===============================================================================
ID Control Conn ID Tunnel-ID Session-ID State
-------------------------------------------------------------------------------
143524786 143523840 2190 946 established
143526923 143523840 2190 3083 established
143531662 143523840 2190 7822 closed
236926987 236912640 3615 14347 closed
236927915 236912640 3615 15275 closed
379407426 379387904 5789 19522 established
658187773 658178048 10043 9725 established
658198275 658178048 10043 20227 established
658210606 658178048 10043 32558 established
-------------------------------------------------------------------------------
No. of sessions: 9
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp session local-name lac1.wholesaler.com remote-name lns.retailer1.net
===============================================================================
L2TP Session Summary
===============================================================================
ID Control Conn ID Tunnel-ID Session-ID State
-------------------------------------------------------------------------------
379407426 379387904 5789 19522 established
-------------------------------------------------------------------------------
No. of sessions: 1
===============================================================================
*A:Dut-C#
*A:Fden-Dut2-BSA2# show router l2tp session connection-id 600407016
===============================================================================
L2TP Session Summary
===============================================================================
ID Control Conn ID Tunnel-ID Session-ID State
-------------------------------------------------------------------------------
600407016 600375296 9161 31720 established
simon@base.lac.base.lns
interface: gi_base_lns_base_lac
service-id: 100
ip-address: 10.100.2.1
===============================================================================
*A:Fden-Dut2-BSA2# show router l2tp session connection-id 600407016 detail
===============================================================================
L2TP Session Status
===============================================================================
Connection ID: 600407016
State : established
Tunnel Group : base_lns_base_lac
Assignment ID: t1
Error Message: N/A
Control Conn ID : 600375296 Remote Conn ID : 1026712216
Tunnel ID : 9161 Remote Tunnel ID : 15666
Session ID : 31720 Remote Session ID : 25240
Time Started : 02/02/2010 09:08:54
Time Established : 02/02/2010 09:08:54 Time Closed : N/A
CDN Result : noError General Error : noError
-------------------------------------------------------------------------------
PPP information
Service Id : 100
Interface : gi_base_lns_base_lac
LCP State : opened
IPCP State : opened
IPv6CP State : initial
PPP MTU : 1492
PPP Auth-Protocol : chap
PPP User-Name : simon@base.lac.base.lns
Subscriber Origin : radius
Strings Origin : radius
IPCP Info Origin : radius
IPv6CP Info Origin : none
Subscriber : "simon"
Sub-Profile-String : "sub1"
SLA-Profile-String : "sla1"
ANCP-String : ""
Int-Dest-Id : ""
App-Profile-String : ""
Category-Map-Name : ""
IP Address : 10.100.2.1
Primary DNS : N/A
Secondary DNS : N/A
Primary NBNS : N/A
Secondary NBNS : N/A
Address-Pool : N/A
IPv6 Prefix : N/A
IPv6 Del.Pfx. : N/A
Primary IPv6 DNS : N/A
Secondary IPv6 DNS : N/A
Circuit-Id : (Not Specified)
Remote-Id : (Not Specified)
Session-Timeout : N/A
Radius Class : (Not Specified)
Radius User-Name : simon@base.lac.base.lns
statistics
Syntax
statistics
Context
show>router>l2tp
Description
This command displays L2TP statistics.
Output
The following output is an example of L2TP statistics information.
Sample Output
*A:Dut-C# show router l2tp statistics
===============================================================================
L2TP Statistics
===============================================================================
Tunnels Sessions
-------------------------------------------------------------------------------
Active : 3 Active : 6
Setup history since 04/17/2009 18:38:41
Total : 4 Total : 9
Failed : 0 Failed : 0
Failed Auth : 0
===============================================================================
*A:Dut-C#
tunnel
Syntax
tunnel [statistics] [detail] [peer ip-address] [state tunnel-state] [remote-connection-id remote-connection-id (v3)] [group group-name] [assignment-id assignment-id] [local-name host-name] [remote-name host-name]
tunnel [statistics] [detail] [peer ip-address] [state tunnel-state] [remote-tunnel-id remote-tunnel-id (v2)] [group group-name] [assignment-id assignment-id] [local-name host-name] [remote-name host-name]
tunnel tunnel-id tunnel-id (v2) [statistics] [detail]
tunnel connection-id connection-id (v3) [statistics] [detail]
Context
show>router>l2tp
Description
This command displays L2TP tunnel operational information.
Parameters
statistics—
displays L2TP tunnel statistics
detail—
displays detailed L2TP tunnel information
peer ip-address—
displays information for the the IP address of the peer
state tunnel-state—
displays the operational state of the tunnel
remote-connection-id remote-connection-id (v3)—
displays information for the specified remote connection ID
group group-name—
displays L2TP tunnel information for the specified tunnel group
assignment-id assignment-id—
specifies a string that distinguishes this Layer Two Tunneling Protocol tunnel
local-name host-name—
specifies a local host name used by this system
remote-name host-name—
specifies a remote host name used by this system
connection-id connection-id—
specifies the identification number for a Layer Two Tunneling Protocol connection
Values—
1 to 429496729
detail—
displays detailed L2TP session information
session-id session-id (v2)—
displays information for the specified the L2TP session
Values—
1 to 65535
state session-state—
displays the operational state of the L2TP session
Values—
closed, closed-by-peer, draining, drained, established, established-idle, idle, wait-reply, wait-conn
peer ip-address—
displays information for the specified peer IP address
Values—
The following values apply to the 7750 SR:
ipv4-address | a.b.c.d (host bits must be 0) |
ipv6-address | x:x:x:x:x:x:x:x[-interface] |
x:x:x:x:x:x:d.d.d.d[-interface] | |
x: [0 to FFFF]H | |
d: [0 to 255]D | |
interface: 32 characters maximum, mandatory for link local addresses |
Values—
The following values apply to the 7450 ESS:
ipv4-address: a.b.c.d (host bits must be 0)
tunnel-id tunnel-id (v2)—
displays information for the specified ID of a L2TP tunnel.
In L2TP version 2, it is the 16-bit tunnel ID
Values—
1 to 65535
control-connection-id connection-id (v3)—
displays information for the specified ID of a L2TP tunnel. In L2TP version 3, it is the 32-bit control connection ID
Values—
1 to 429496729
Output
The following output is an example of L2TP tunnel operational information.
Sample Output
*A:Dut-C# show router l2tp tunnel
===============================================================================
Conn ID Loc-Tu-ID Rem-Tu-ID State Ses Active
Group Ses Total
Assignment
-------------------------------------------------------------------------------
143523840 2190 17525 established 2
isp1.group-2 3
isp1.tunnel-3
236912640 3615 58919 closedByPeer 0
isp1.group-2 2
isp1.tunnel-2
379387904 5789 4233 established 1
isp1.group-1 1
isp1.tunnel-1
658178048 10043 33762 draining 3
isp1.group-2 3
isp1.tunnel-2
-------------------------------------------------------------------------------
No. of tunnels: 4
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp tunnel state closed-by-peer detail
===============================================================================
L2TP Tunnel Status
===============================================================================
Connection ID : 236912640
State : closedByPeer
IP : 10.20.1.3
Peer IP : 10.10.20.100
Name : lac1.wholesaler.com
Remote Name : lns2.retailer1.net
Assignment ID : isp1.tunnel-2
Group Name : isp1.group-2
Error Message : Goodbye!
Remote Conn ID : 3861315584
Tunnel ID : 3615 Remote Tunnel ID : 58919
UDP Port : 1701 Remote UDP Port : 1701
Preference : 100
Hello Interval (s): infinite
Idle TO (s) : 60 Destruct TO (s) : 7200
Max Retr Estab : 5 Max Retr Not Estab: 5
Session Limit : 1000 AVP Hiding : never
Transport Type : udpIp Challenge : never
Time Started : 04/17/2009 18:41:03 Time Idle : 04/17/2009 18:43:20
Time Established : 04/17/2009 18:41:03 Time Closed : 04/17/2009 18:43:20
Stop CCN Result : generalReq General Error : noError
-------------------------------------------------------------------------------
No. of tunnels: 1
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp tunnel state established
===============================================================================
Conn ID Loc-Tu-ID Rem-Tu-ID State Ses Active
Group Ses Total
Assignment
-------------------------------------------------------------------------------
143523840 2190 17525 established 2
isp1.group-2 3
isp1.tunnel-3
379387904 5789 4233 established 1
isp1.group-1 1
isp1.tunnel-1
-------------------------------------------------------------------------------
No. of tunnels: 2
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp tunnel tunnel-id 2190 statistics
===============================================================================
L2TP Tunnel Statistics
===============================================================================
Connection ID: 143523840
-------------------------------------------------------------------------------
Attempts Failed Active Total
-------------------------------------------------------------------------------
Sessions 3 0 2 3
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Rx Tx
-------------------------------------------------------------------------------
Ctrl Packets 47 47
Ctrl Octets 954 1438
Error Packets 0 0
-------------------------------------------------------------------------------
*A:Dut-C#
*A:Dut-C# show router l2tp tunnel connection-id 143523840 statistics
===============================================================================
L2TP Tunnel Statistics
===============================================================================
Connection ID: 143523840
-------------------------------------------------------------------------------
Attempts Failed Active Total
-------------------------------------------------------------------------------
Sessions 3 0 2 3
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Rx Tx
-------------------------------------------------------------------------------
Ctrl Packets 48 48
Ctrl Octets 974 1450
Error Packets 0 0
-------------------------------------------------------------------------------
*A:Dut-C#
*A:Dut-C# show router l2tp tunnel remote-tunnel-id 17525 detail
===============================================================================
L2TP Tunnel Status
===============================================================================
Connection ID : 143523840
State : established
IP : 10.20.1.3
Peer IP : 10.10.20.101
Name : lac1.wholesaler.com
Remote Name : lns3.retailer1.net
Assignment ID : isp1.tunnel-3
Group Name : isp1.group-2
Error Message : N/A
Remote Conn ID : 1148518400
Tunnel ID : 2190 Remote Tunnel ID : 17525
UDP Port : 1701 Remote UDP Port : 1701
Preference : 100
Hello Interval (s): 300
Idle TO (s) : 0 Destruct TO (s) : 7200
Max Retr Estab : 5 Max Retr Not Estab: 5
Session Limit : 1000 AVP Hiding : never
Transport Type : udpIp Challenge : never
Time Started : 04/17/2009 18:41:14 Time Idle : N/A
Time Established : 04/17/2009 18:41:14 Time Closed : N/A
Stop CCN Result : noError General Error : noError
-------------------------------------------------------------------------------
No. of tunnels: 1
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp tunnel remote-connection-id 1148518400 statistics
===============================================================================
L2TP Tunnel Statistics
===============================================================================
Connection ID: 143523840
-------------------------------------------------------------------------------
Attempts Failed Active Total
-------------------------------------------------------------------------------
Sessions 3 0 2 3
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Rx Tx
-------------------------------------------------------------------------------
Ctrl Packets 50 50
Ctrl Octets 1014 1474
Error Packets 0 0
-------------------------------------------------------------------------------
No. of tunnels: 1
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp tunnel peer 10.10.20.100 state closed-by-peer detail
===============================================================================
L2TP Tunnel Status
===============================================================================
Connection ID : 236912640
State : closedByPeer
IP : 10.20.1.3
Peer IP : 10.10.20.100
Name : lac1.wholesaler.com
Remote Name : lns2.retailer1.net
Assignment ID : isp1.tunnel-2
Group Name : isp1.group-2
Error Message : Goodbye!
Remote Conn ID : 3861315584
Tunnel ID : 3615 Remote Tunnel ID : 58919
UDP Port : 1701 Remote UDP Port : 1701
Preference : 100
Hello Interval (s): infinite
Idle TO (s) : 60 Destruct TO (s) : 7200
Max Retr Estab : 5 Max Retr Not Estab: 5
Session Limit : 1000 AVP Hiding : never
Transport Type : udpIp Challenge : never
Time Started : 04/17/2009 18:41:03 Time Idle : 04/17/2009 18:43:20
Time Established : 04/17/2009 18:41:03 Time Closed : 04/17/2009 18:43:20
Stop CCN Result : generalReq General Error : noError
-------------------------------------------------------------------------------
No. of tunnels: 1
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp tunnel group isp1.group-2
===============================================================================
Conn ID Loc-Tu-ID Rem-Tu-ID State Ses Active
Group Ses Total
Assignment
-------------------------------------------------------------------------------
143523840 2190 17525 established 2
isp1.group-2 3
isp1.tunnel-3
236912640 3615 58919 closedByPeer 0
isp1.group-2 2
isp1.tunnel-2
658178048 10043 33762 draining 3
isp1.group-2 3
isp1.tunnel-2
-------------------------------------------------------------------------------
No. of tunnels: 3
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp tunnel assignment-id isp1.tunnel-3 state established statistics
===============================================================================
L2TP Tunnel Statistics
===============================================================================
Connection ID: 143523840
-------------------------------------------------------------------------------
Attempts Failed Active Total
-------------------------------------------------------------------------------
Sessions 3 0 2 3
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Rx Tx
-------------------------------------------------------------------------------
Ctrl Packets 66 66
Ctrl Octets 1310 1690
Error Packets 0 0
-------------------------------------------------------------------------------
No. of tunnels: 1
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp tunnel local-name lac1.wholesaler.com remote-
name lns2.retailer1.net state draining
===============================================================================
Conn ID Loc-Tu-ID Rem-Tu-ID State Ses Active
Group Ses Total
Assignment
-------------------------------------------------------------------------------
658178048 10043 33762 draining 3
isp1.group-2 3
isp1.tunnel-2
-------------------------------------------------------------------------------
No. of tunnels: 1
===============================================================================
*A:Dut-C#
*A:Fden-Dut2-BSA2# show router l2tp tunnel connection-id 600375296 statistics
===============================================================================
L2TP Tunnel Statistics
===============================================================================
Connection ID: 600375296
-------------------------------------------------------------------------------
Attempts Failed Active Total
-------------------------------------------------------------------------------
Sessions 1 0 1 1
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Rx Tx
-------------------------------------------------------------------------------
Ctrl Packets 6 6
Ctrl Octets 553 292
Error Packets 0 0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Accepted Duplicate Out-Of-Wnd
-------------------------------------------------------------------------------
Fsm Messages 4 0 0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Unsent Max Unsent Cur Ack Max Ack Cur
-------------------------------------------------------------------------------
Q Length 1 0 1 0
-------------------------------------------------------------------------------
Window Size Cur : 4
acceptedMsgType
StartControlConnectionRequest : 1
StartControlConnectionConnected : 1
IncomingCallRequest : 1
IncomingCallConnected : 1
ZeroLengthBody : 3
originalTransmittedMsgType
StartControlConnectionReply : 1
Hello : 2
IncomingCallReply : 1
ZeroLengthBody : 3
last cleared time : N/A
===============================================================================
On LAC (master node after switchover)
===============================================================================
L2TP Tunnel Status
===============================================================================
Connection ID: 11206656
State : established
IP : 10.124.0.9
UDP : 1701
Peer IP : 10.124.0.3
Peer UDP : 1701
Tx dst-IP : 10.124.0.3
Tx dst-UDP : 1701
Rx src-IP : 10.124.0.3
Rx src-UDP : 1701
Name : mc-lac
Remote Name : mc-lns
Assignment ID: t1
Group Name : mc-lac
Acct. Policy : l2tp-base
Error Message: N/A
Remote Conn ID : 429260800
Tunnel ID : 171 Remote Tunnel ID : 6550
Preference : 50 Receive Window : 64
Hello Interval (s): infinite
Idle TO (s) : infinite Destruct TO (s) : 60
Max Retr Estab : 5 Max Retr Not Estab: 5
Session Limit : 32767 AVP Hiding : never
Transport Type : udpIp Challenge : never
Time Started : 02/19/2015 13:00:36 Time Idle : N/A
Time Established : 02/19/2015 13:00:36 Time Closed : N/A
Stop CCN Result : noError General Error : noError
Blacklist-state : not-blacklisted
Set Dont Fragment : true
Failover
State : recoverable
Recovery Conn ID : N/A
Recovery state : not-applicable
Recovered Conn ID : N/A
Recovery method : mcs
Track SRRP : 124
Ctrl msg behavior : handle
-------------------------------------------------------------------------------
No. of tunnels: 1
===============================================================================
On LAC (slave node after switchover)
show router l2tp tunnel detail
===============================================================================
L2TP Tunnel Status
===============================================================================
Connection ID: 11206656
State : draining
IP : 10.124.0.9
UDP : 1701
Peer IP : 10.124.0.3
Peer UDP : 1701
Tx dst-IP : 10.124.0.3
Tx dst-UDP : 1701
Rx src-IP : 10.124.0.3
Rx src-UDP : 1701
Name : mc-lac
Remote Name : mc-lns
Assignment ID: t1
Group Name : mc-lac
Acct. Policy : l2tp-base
Error Message: N/A
Remote Conn ID : 429260800
Tunnel ID : 171 Remote Tunnel ID : 6550
Preference : 50 Receive Window : 64
Hello Interval (s): infinite
Idle TO (s) : infinite Destruct TO (s) : 60
Max Retr Estab : 5 Max Retr Not Estab: 5
Session Limit : 32767 AVP Hiding : never
Transport Type : udpIp Challenge : never
Time Started : 02/19/2015 13:00:36 Time Idle : N/A
Time Established : 02/19/2015 13:00:36 Time Closed : N/A
Stop CCN Result : noError General Error : noError
Blacklist-state : not-blacklisted
Set Dont Fragment : true
Failover
State : recoverable
Recovery Conn ID : N/A
Recovery state : not-applicable
Recovered Conn ID : N/A
Recovery method : mcs
Track SRRP : 124
Ctrl msg behavior : forward-to-mcs-peer
-------------------------------------------------------------------------------
No. of tunnels: 1
===============================================================================
On LNS after switchover
show router l2tp tunnel detail
===============================================================================
L2TP Tunnel Status
===============================================================================
Connection ID: 429260800
State : established
IP : 10.124.0.3
UDP : 1701
Peer IP : 10.124.0.9
Peer UDP : 1701
Tx dst-IP : 10.124.0.9
Tx dst-UDP : 1701
Rx src-IP : 10.124.0.9
Rx src-UDP : 1701
Name : mc-lns
Remote Name : mc-lac
Assignment ID: t1
Group Name : mc-lns
Acct. Policy : N/A
Error Message: N/A
Remote Conn ID : 11206656
Tunnel ID : 6550 Remote Tunnel ID : 171
Preference : 50 Receive Window : 64
Hello Interval (s): 300
Idle TO (s) : infinite Destruct TO (s) : 60
Max Retr Estab : 5 Max Retr Not Estab: 5
Session Limit : 32767 AVP Hiding : never
Transport Type : udpIp Challenge : never
Time Started : 02/19/2015 13:00:36 Time Idle : N/A
Time Established : 02/19/2015 13:00:36 Time Closed : N/A
Stop CCN Result : noError General Error : noError
Blacklist-state : not-blacklisted
Set Dont Fragment : true
Failover
State : not-recoverable
Recovery Conn ID : N/A
Recovery state : not-applicable
Recovered Conn ID : N/A
Recovery method : mcs
Track SRRP : (Not specified)
Ctrl msg behavior : handle
-------------------------------------------------------------------------------
No. of tunnels: 1
===============================================================================
On LAC (master node after switchover; 7536640 is the recovered tunnel, 1865089024 is the recovery tunnel)
===============================================================================
L2TP Tunnel Status
===============================================================================
Connection ID: 7536640
State : established
IP : 10.124.0.9
UDP : 1701
Peer IP : 10.124.0.3
Peer UDP : 1701
Tx dst-IP : 10.124.0.3
Tx dst-UDP : 1701
Rx src-IP : 10.124.0.3
Rx src-UDP : 1701
Name : mc-lac
Remote Name : mc-lns
Assignment ID: t1
Group Name : mc-lac
Acct. Policy : l2tp-base
Error Message: N/A
Remote Conn ID : 433324032
Tunnel ID : 115 Remote Tunnel ID : 6612
Preference : 50 Receive Window : 64
Hello Interval (s): infinite
Idle TO (s) : infinite Destruct TO (s) : 60
Max Retr Estab : 5 Max Retr Not Estab: 5
Session Limit : 32767 AVP Hiding : never
Transport Type : udpIp Challenge : never
Time Started : 02/19/2015 13:07:53 Time Idle : N/A
Time Established : 02/19/2015 13:07:53 Time Closed : N/A
Stop CCN Result : noError General Error : noError
Blacklist-state : not-blacklisted
Set Dont Fragment : true
Failover
State : recoverable
Recovery Conn ID : 1865089024
Recovery state : not-applicable
Recovered Conn ID : N/A
Recovery method : recovery-tunnel
Track SRRP : 124
Ctrl msg behavior : handle
-------------------------------------------------------------------------------
Connection ID: 1865089024
State : closed
IP : 10.124.0.9
UDP : 1701
Peer IP : 10.124.0.3
Peer UDP : 1701
Tx dst-IP : 10.124.0.3
Tx dst-UDP : 1701
Rx src-IP : 10.124.0.3
Rx src-UDP : 1701
Name : mc-lac
Remote Name : mc-lns
Assignment ID: t1
Group Name : mc-lac
Acct. Policy : l2tp-base
Error Message: N/A
Remote Conn ID : 1169424384
Tunnel ID : 28459 Remote Tunnel ID : 17844
Preference : 50 Receive Window : 64
Hello Interval (s): infinite
Idle TO (s) : 60 Destruct TO (s) : 60
Max Retr Estab : 5 Max Retr Not Estab: 5
Session Limit : 32767 AVP Hiding : never
Transport Type : udpIp Challenge : never
Time Started : 02/19/2015 13:12:05 Time Idle : N/A
Time Established : 02/19/2015 13:12:05 Time Closed : 02/19/2015
13:12:05
Stop CCN Result : generalReq General Error : noError
Blacklist-state : not-blacklisted
Set Dont Fragment : true
Failover
State : not-applicable
Recovery Conn ID : N/A
Recovery state : recovery-tunnel
Recovered Conn ID : 7536640
Recovery method : default
Track SRRP : 124
Ctrl msg behavior : handle
-------------------------------------------------------------------------------
No. of tunnels: 2
===============================================================================
On LAC (slave node after switchover)
===============================================================================
L2TP Tunnel Status
===============================================================================
Connection ID: 7536640
State : draining
IP : 10.124.0.9
UDP : 1701
Peer IP : 10.124.0.3
Peer UDP : 1701
Tx dst-IP : 10.124.0.3
Tx dst-UDP : 1701
Rx src-IP : 10.124.0.3
Rx src-UDP : 1701
Name : mc-lac
Remote Name : mc-lns
Assignment ID: t1
Group Name : mc-lac
Acct. Policy : l2tp-base
Error Message: N/A
Remote Conn ID : 433324032
Tunnel ID : 115 Remote Tunnel ID : 6612
Preference : 50 Receive Window : 64
Hello Interval (s): infinite
Idle TO (s) : infinite Destruct TO (s) : 60
Max Retr Estab : 5 Max Retr Not Estab: 5
Session Limit : 32767 AVP Hiding : never
Transport Type : udpIp Challenge : never
Time Started : 02/19/2015 13:07:53 Time Idle : N/A
Time Established : 02/19/2015 13:07:53 Time Closed : N/A
Stop CCN Result : noError General Error : noError
Blacklist-state : not-blacklisted
Set Dont Fragment : true
Failover
State : recoverable
Recovery Conn ID : N/A
Recovery state : not-applicable
Recovered Conn ID : N/A
Recovery method : recovery-tunnel
Track SRRP : 124
Ctrl msg behavior : forward-to-mcs-peer
-------------------------------------------------------------------------------
No. of tunnels: 1
===============================================================================
On LNS after switchover (433324032 is the recovered tunnel, 1169424384 is the recovery tunnel)
===============================================================================
L2TP Tunnel Status
===============================================================================
Connection ID: 433324032
State : established
IP : 10.124.0.3
UDP : 1701
Peer IP : 10.124.0.9
Peer UDP : 1701
Tx dst-IP : 10.124.0.9
Tx dst-UDP : 1701
Rx src-IP : 10.124.0.9
Rx src-UDP : 1701
Name : mc-lns
Remote Name : mc-lac
Assignment ID: t1
Group Name : mc-lns
Acct. Policy : N/A
Error Message: N/A
Remote Conn ID : 7536640
Tunnel ID : 6612 Remote Tunnel ID : 115
Preference : 50 Receive Window : 64
Hello Interval (s): 300
Idle TO (s) : infinite Destruct TO (s) : 60
Max Retr Estab : 5 Max Retr Not Estab: 5
Session Limit : 32767 AVP Hiding : never
Transport Type : udpIp Challenge : never
Time Started : 02/19/2015 13:07:53 Time Idle : N/A
Time Established : 02/19/2015 13:07:53 Time Closed : N/A
Stop CCN Result : noError General Error : noError
Blacklist-state : not-blacklisted
Set Dont Fragment : true
Failover
State : not-recoverable
Recovery Conn ID : 1169424384
Recovery state : not-applicable
Recovered Conn ID : N/A
Recovery method : recovery-tunnel
Track SRRP : (Not specified)
Ctrl msg behavior : handle
-------------------------------------------------------------------------------
Connection ID: 1169424384
State : closed
IP : 10.124.0.3
UDP : 1701
Peer IP : 10.124.0.9
Peer UDP : 1701
Tx dst-IP : 10.124.0.9
Tx dst-UDP : 1701
Rx src-IP : 10.124.0.9
Rx src-UDP : 1701
Name : mc-lns
Remote Name : mc-lac
Assignment ID: t1
Group Name : mc-lns
Acct. Policy : N/A
Error Message: N/A
Remote Conn ID : 1865089024
Tunnel ID : 17844 Remote Tunnel ID : 28459
Preference : 50 Receive Window : 64
Hello Interval (s): infinite
Idle TO (s) : 60 Destruct TO (s) : 60
Max Retr Estab : 5 Max Retr Not Estab: 5
Session Limit : 32767 AVP Hiding : never
Transport Type : udpIp Challenge : never
Time Started : 02/19/2015 13:12:05 Time Idle : N/A
Time Established : 02/19/2015 13:12:05 Time Closed : 02/19/2015
13:12:05
Stop CCN Result : generalReq General Error : noError
Blacklist-state : not-blacklisted
Set Dont Fragment : true
Failover
State : not-applicable
Recovery Conn ID : N/A
Recovery state : recovery-tunnel
Recovered Conn ID : 433324032
Recovery method : default
Track SRRP : (Not specified)
Ctrl msg behavior : handle
-------------------------------------------------------------------------------
No. of tunnels: 2
===============================================================================
Clear Commands
The following command outputs are examples only; actual displays may differ depending on supported functionality and user configuration.
router
Syntax
router router-instance
Context
clear>router
Description
This command enters the context in which to clear various parameters for the specified router-instance.
Parameters
router-instance—
specifies the router name, CPM router instance, or service ID
Values—
router-name or service-id
router-instance : router-name | ||
router-name | Base | management | vpls-management | cpm-vr-name | |
cpm-vr-name | [32 characters maximum] | |
service-id: 1 to 2147483647
Values—
Base
arp
Syntax
arp {all | ip-addr | interface {ip-int-name | ip-addr}}
Context
clear>router
Description
This command clears all or specific ARP entries.
The scope of ARP cache entries cleared depends on the command line option(s) specified.
Parameters
all—
clears all ARP cache entries
ip-addr—
clears the ARP cache entry for the specified IP address
interface ip-int-name—
clears all ARP cache entries for the IP interface with the specified name
interface ip-addr—
clears all ARP cache entries for the specified IP interface with the specified IP address
bfd
Syntax
bfd src-ip ip-address dst-ip ip-address
bfd all
Context
clear>router
Description
This command enables the context to clear bi-directional forwarding (BFD) sessions and statistics.
session
Syntax
session src-ip ip-address dst-ip ip-address
Context
clear>router>bfd
Description
This command clears BFD sessions.
Parameters
src-ip ip-address—
specifies the address of the local endpoint of this BFD session
dst-ip ip-address—
specifies the address of the remote endpoint of this BFD session
statistics
Syntax
statistics src-ip ip-address dst-ip ip-address
statistics all
Context
clear>router>bfd
Description
This command clears BFD statistics.
Parameters
src-ip ip-address—
specifies the address of the local endpoint of this BFD session.
dst-ip ip-address—
specifies the address of the remote endpoint of this BFD session.
all—
clears statistics for all BFD sessions
dhcp
Syntax
dhcp
Context
clear>router
Description
This command enables the context to clear DHCP related information.
dhcp6
Syntax
dhcp6
Context
clear>router
Description
This command enables the context to clear DHCP6 related information.
forwarding-table
Syntax
forwarding-table [slot-number]
Context
clear>router
Description
This command clears entries in the forwarding table (maintained by the IOMs).
If the slot number is not specified, the command forces the route table to be recalculated.
Parameters
slot-number—
clears the specified card slot
Values—
all IOMs or linecards
Values—
1 to 10
grt-lookup
Syntax
grt-lookup
Context
clear>router
Description
This command re-evaluates route policies for GRT.
icmp
Syntax
icmp all
icmp global
icmp interface interface-name
Context
clear>router
Description
This command clears ICMP statistics.
Parameters
all—
clears all statistics
global—
clears global router statistics
interface-name—
clears ICMP statistics for the specified interface
Values—
32 characters maximum
icmp-redirect-route
Syntax
icmp-redirect-route {all | ip-address}
Context
clear>router
Description
This command deletes routes created as a result of ICMP redirects received on the management interface.
Parameters
all—
clears all routes
ip-address—
clears the routes associated with the specified IP address
icmp6
Syntax
icmp6 all
icmp6 global
icmp6 interface interface-name
Context
clear>router
Description
This command clears ICMPv6 statistics.
Parameters
all—
clears all statistics
global—
clears global router statistics
interface-name—
clears ICMPv6 statistics for the specified interface
interface
Syntax
interface [ip-int-name | ip-addr] [icmp] [urpf-stats] [statistics]
Context
clear>router
Description
This command clears IP interface statistics.
If no IP interface is specified either by IP interface name or IP address, the command will perform the clear operation on all IP interfaces.
Parameters
ip-int-name | ip-addr—
the IP interface name or IP interface address
Values—
all IP interfaces
icmp—
specifies to reset the ICMP statistics for the IP interface(s)
urpf-stats—
resets the statistics associated with uRPF failures
statistics —
resets the IP interface traffic statistics
l2tp
Syntax
l2pt
Context
clear>router
Description
This command enables the context to clear L2PT data.
group
Syntax
group tunnel-group-name
Context
clear>router>l2tp
Description
This command clears L2PT data.
Parameters
tunnel-group-name—
specifies a Layer Two Tunneling Protocol Tunnel Group name
tunnel
Syntax
tunnel tunnel-id
Context
clear>router>l2tp
Description
This command clears L2PT data.
Parameters
tunnel-group-name—
clears L2TP tunnel statistics
statistics
Syntax
statistics
Context
clear>router>l2tp
clear>router>l2tp>group
clear>router>l2tp> tunnel
Description
This command clears statistics for the specified context.
statistics
Syntax
statistics [ip-address | ip-int-name]
Context
clear>router>dhcp
clear>router>dhcp6
Description
This command clear statistics for DHCP and DHCP6and DHCP6 relay and snooping statistics.
If no IP address or interface name is specified, then statistics are cleared for all configured interfaces.
If an IP address or interface name is specified, then only data regarding the specified interface is cleared.
Parameters
ip-address | ip-int-name —
displays statistics for the specified IP interface
neighbor
Syntax
neighbor {all | ip-address}
neighbor [interface ip-int-name | ip-address]
Context
clear>router
Description
This command clears IPv6 neighbor information.
Parameters
all—
clears IPv6 neighbors
ip-int-name—
clears the specified neighbor interface information
Values—
32 characters maximum
ip-address—
clears the specified IPv6 neighbors
Values—
ipv6-address: | x:x:x:x:x:x:x:x (eight 16-bit pieces) |
x:x:x:x:x:x:d.d.d.d | |
x: [0 to FFFF]H | |
d: [0 to 255]D |
router-advertisement
Syntax
router-advertisement all
router-advertisement [interface interface-name]
Context
clear>router
Description
This command clears all router advertisement counters.
Parameters
all—
clears all router advertisement counters for all interfaces
interface interface-name—
clear router advertisement counters for the specified interface
Debug Commands
destination
Syntax
destination trace-destination
Context
debug>trace
Description
This command specifies the destination to send trace messages.
Parameters
trace-destination—
The destination to send trace messages.
Values—
stdout, console, logger, memory
enable
Syntax
[no] enable
Context
debug>trace
Description
This command enables the trace.
The no form of the command disables the trace.
trace-point
Syntax
[no] trace-point [module module-name] [type event-type] [class event-class] [task task-name] [function function-name]
Context
debug>trace
Description
This command adds trace points.
The no form of the command removes the trace points.
router
Syntax
router router-instance
Context
debug
Description
This command enters the context to enable debugging of various protocols and areas of a router-instance.
Parameters
router-instance—
specify the router name, CPM router instance, or service ID
Values—
router-name or service-id
router-instance : router-name | ||
router-name | Base | management | cpm-vr-name | |
cpm-vr-name | [32 characters maximum] | |
service-id: 1 to 2147483647
Values—
Base
ip
Syntax
ip
Context
debug>router
Description
This command configures debugging for IP.
arp
Syntax
arp
Context
debug>router>ip
Description
This command configures route table debugging.
icmp
Syntax
[no] icmp
Context
debug>router>ip
Description
This command enables ICMP debugging.
icmp6
Syntax
icmp6 [ip-int-name]
no icmp6
Context
debug>router>ip
Description
This command enables ICMPv6 debugging.
interface
Syntax
[no] interface [ip-int-name | ip-address | ipv6-address | ipv6-address]
Context
debug>router>ip
Description
This command displays the router IP interface table sorted by interface index.
Parameters
ip-address—
only displays the interface information associated with the specified IP address
Values—
The following values apply to the 7750 SR and 7950 XRS:
ipv4-address | a.b.c.d (host bits must be 0) |
ipv6-address | x:x:x:x:x:x:x:x (eight 16-bit pieces) |
x:x:x:x:x:x:d.d.d.d | |
x: [0 to FFFF]H | |
d: [0 to 255]D |
Values—
The following values apply to the 7450 ESS:
ipv4-address: a.b.c.d (host bits must be 0)
ip-int-name—
only displays the interface information associated with the specified IP interface name
Values—
32 characters maximum
packet
Syntax
packet [ip-int-name | ip-address] [headers] [protocol-id]
no packet [ip-int-name | ip-address]
Context
debug>router>ip
Description
This command enables debugging for IP packets.
Parameters
ip-int-name—
only displays the interface information associated with the specified IP interface name
Values—
32 characters maximum
ip-address—
only displays the interface information associated with the specified IP address
headers—
only displays information associated with the packet header
protocol-id—
specifies the decimal value representing the IP protocol to debug. Well known protocol numbers include ICMP(1), TCP(6), UDP(17). The no form the command removes the protocol from the criteria.
Values—
0 to 255 (values can be expressed in decimal, hexadecimal, or binary)
route-table
Syntax
route-table [ip-prefix/prefix-length]
route-table ip-prefix/prefix-length longer
no route-table
Context
debug>router>ip
Description
This command configures route table debugging.
Parameters
ip-prefix—
The IP prefix for prefix list entry in dotted decimal notation.
Values—
The following values apply to the 7750 SR and 7950 XRS:
ipv4-prefix | a.b.c.d (host bits must be 0) | |
ipv4-prefix-length | 0 to 32 | |
ipv6-prefix | x:x:x:x:x:x:x:x (eight 16-bit pieces) | |
x:x:x:x:x:x:d.d.d.d | ||
x: | [0 to FFFF]H | |
d: | [0 to 255]D | |
ipv6-prefix-length | 0 to 128 |
Values—
The following values apply to the 7450 ESS:
ipv4-prefix | a.b.c.d (host bits must be 0) |
ipv4-prefix-length | 0 to 32 |
longer—
specifies the prefix list entry matches any route that matches the specified ip-prefix and prefix mask length values greater than the specified mask
tunnel-table
Syntax
tunnel-table [ip-address] [ldp | rsvp [tunnel-id tunnel-id] | sdp [sdp-id sdp-id]]
Context
debug>router>ip
Description
This command enables debugging for tunnel tables.
l2tp
Syntax
l2tp
Context
debug>router
Description
This command enables the context to configure debugging for L2TP.
peer
Syntax
peer ip-address [{udp-port port | ip}]
Context
debug>router>l2tp
Description
This command enables and configures debugging for an L2TP peer.
Parameters
ip-address—
Specifies the IP address of the L2TP peer
port—
Specifies the UDP port for the L2TP peer. This parameter is only supported with L2TPv2 peers.
ip—
Displays debugging information for peers using IP transport
mtrace
Syntax
[no] mtrace
Context
debug>router
Description
This command configures debugging for mtrace.
tms
Syntax
[no] tms [interface tms-interface] api [detail] tms-interface
Context
debug>router
Description
This command configures debugging for Threat Management Services.
misc
Syntax
[no] misc
Context
debug>router>mtrace
Description
This command enables debugging for mtrace miscellaneous.
packet
Syntax
[no] packet [query | request | response]
Context
debug>router>mtrace
Description
This command enables debugging for mtrace packets.
Tools Commands
tunnel
Syntax
tunnel
Context
tools>dump>router>segment-routing> tunnel
Description
This command displays Segment Routing tunnels information.
Output
Sample Output
*A:Dut-F# tools dump router segment-routing tunnel
===================================================================================================
Legend: (B) - Backup Next-hop for Fast Re-Route
(D) - Duplicate
====================================================================================
-----------------------------------------------------------------------------------+
Prefix |
Sid-Type Fwd-Type In-Label Prot-
Inst |
Next Hop(s) Out-Label(s) Interface/Tunnel-ID |
--------------------------------------------------------------------------------------------------+
1.0.33.3
Node Orig/Transit 70000 OSPF-0
1.0.36.3 40000 DUTF_TO
_DUTC.1.0
(B)1.0.26.2 30998 DUTF_TO
_DUTB.1.0
1.0.44.4
Node Orig/Transit 70001 OSPF-0
1.0.26.2 30001 DUTF_TO
_DUTB.1.0
(B)1.0.56.5 60001 DUTF_TO
_DUTE.1.0
1.0.55.5
Node Orig/Transit 70002 OSPF-0
1.0.56.5 60002 DUTF_TO
_DUTE.1.0
(B)1.0.26.2 30995 DUTF_TO
_DUTB.1.0
Node Terminating 70003 OSPF-0
1.0.11.1
Node Orig/Transit 70004 OSPF-0
1.0.26.2 30004 DUTF_TO
_DUTB.1.0
(B)1.0.36.3 40004 DUTF_TO
_DUTC.1.0
1.0.22.2
Node Orig/Transit 70005 OSPF-0
1.0.26.2 30005 DUTF_TO
_DUTB.1.0
(B)1.0.36.3 40004 DUTF_TO
_DUTC.1.0
20005
10.20.1.3
Node Orig/Transit 70006 OSPF-0
1.0.36.3 40006 DUTF_TO
_DUTC.1.0
(B)1.0.26.2 30004 DUTF_TO
_DUTB.1.0
20006
10.20.1.4
Node Orig/Transit 70007 OSPF-0
1.0.26.2 30007 DUTF_TO
_DUTB.1.0
(B)1.0.56.5 60007 DUTF_TO
_DUTE.1.0
10.20.1.5
Node Orig/Transit 70008 OSPF-0
1.0.56.5 60008 DUTF_TO
_DUTE.1.0
(B)1.0.26.2 30001 DUTF_TO
_DUTB.1.0
50008
Node Terminating 70009 OSPF-0
10.20.1.1
Node Orig/Transit 70010 OSPF-0
1.0.26.2 30010 DUTF_TO
_DUTB.1.0
(B)1.0.36.3 40010 DUTF_TO
_DUTC.1.0
10.20.1.2
Node Orig/Transit 70011 OSPF-0
1.0.26.2 30011 DUTF_TO
_DUTB.1.0
(B)1.0.56.5 60001 DUTF_TO
_DUTE.1.0
50011
Backup Node Transit 70994 OSPF-0
1.0.56.5 60994 DUTF_TO
_DUTE.1.0
Backup Node Transit 70995 OSPF-0
1.0.26.2 30995 DUTF_TO
_DUTB.1.0
Backup Node Transit 70996 OSPF-0
1.0.26.2 30005 DUTF_TO
_DUTB.1.0
Backup Node Transit 70998 OSPF-0
1.0.26.2 30998 DUTF_TO
_DUTB.1.0
Backup Node Transit 70999 OSPF-0
1.0.36.3 40999 DUTF_TO
_DUTC.1.0
Adjacency Transit 262140 OSPF-0
1.0.26.2 3 DUTF_TO
_DUTB.1.0
(B)1.0.36.3 40004 DUTF_TO
_DUTC.1.0
20005
Adjacency Transit 262141 OSPF-0
1.0.56.5 3 DUTF_TO
_DUTE.1.0
Adjacency Transit 262142 OSPF-0
1.0.36.3 3 DUTF_TO
_DUTC.1.0
Adjacency Transit 262143 OSPF-0
1.0.26.2 3 DUTF_TO
_DUTB.1.0
(B)1.0.56.5 60001 DUTF_TO
_DUTE.1.0
50011
*A:Dut-F#
*A:Dut-A# tools dump router segment-routing tunnel
====================================================================================
Legend: (B) - Backup Next-hop for Fast Re-Route
(D) Duplicate
====================================================================================
------------------------------------------------------------------------------------
Prefix |
Sid-Type Fwd-Type In-Label Prot-Inst |
Next Hop(s) Out-Label(s) Interface/Tunnel-ID |
------------------------------------------------------------------------------------
Adjacency Transit 262136 ISIS-0
10.10.2.3 3 ip-
10.10.2.1
Adjacency Transit 262137 ISIS-0
10.10.2.3 3 ip-
10.10.2.1
Adjacency Transit 262138 ISIS-0
10.10.1.2 3 ip-
10.10.1.1
Adjacency Transit 262139 ISIS-0
10.10.1.2 3 ip-
10.10.1.1
Node Terminating 474387 ISIS-0
10.20.1.2
Node Orig/Transit 474388 ISIS-0
10.10.1.2 474388 ip-
10.10.1.1
10.20.1.3
Node Orig/Transit 474389 ISIS-0
10.10.2.3 474389 ip-
10.10.2.1
10.20.1.4
Node Orig/Transit 475287 ISIS-0
10.10.1.2 475287 ip-
10.10.1.1
10.20.1.5
Node Orig/Transit 475288 ISIS-0
10.10.2.3 475288 ip-
10.10.2.1
10.20.1.6
Node Orig/Transit 475289 ISIS-0
10.10.1.2 475289 ip-
10.10.1.1
*A:Dut-A#
*A:Dut-C# tools dump router segment-routing tunnel
====================================================================================
===============
Legend: (B) - Backup Next-hop for Fast Re-Route
(D) -
Duplicate
====================================================================================
===============
------------------------------------------------------------------------------------
--------------+
Prefix
|
Sid-Type Fwd-Type In-Label Prot-
Inst |
Next Hop(s) Out-
Label(s) Interface/Tunnel-ID |
------------------------------------------------------------------------------------
--------------+
Adjacency Transit 262129 ISIS-0
10.10.12.2 3 ip-
10.10.12.3
(B)10.10.3.2 3 ip-
10.10.3.3
Adjacency Transit 262130 ISIS-0
10.10.12.2 3 ip-
10.10.12.3
(B)10.10.3.2 3 ip-
10.10.3.3
Adjacency Transit 262133 ISIS-0
10.10.5.5 3 ip-
10.10.5.3
(B)10.10.12.2 474389 ip-
10.10.12.3
474390
Adjacency Transit 262134 ISIS-0
10.10.5.5 3 ip-
10.10.5.3
(B)10.10.12.2 474389 ip-
10.10.12.3
474390
Adjacency Transit 262135 ISIS-0
10.10.3.2 3 ip-
10.10.3.3
(B)10.10.12.2 3 ip-
10.10.12.3
Adjacency Transit 262136 ISIS-0
10.10.3.2 3 ip-
10.10.3.3
(B)10.10.12.2 3 ip-
10.10.12.3
Adjacency Transit 262137 ISIS-0
10.10.2.1 3 ip-
10.10.2.3
Adjacency Transit 262138 ISIS-0
10.10.2.1 3 ip-
10.10.2.3
10.20.1.4
Node Orig/Transit 474389 ISIS-0
10.10.12.2 474389 ip-
10.10.12.3
(B)10.10.5.5 474389 ip-
10.10.5.3
10.20.1.5
Node Orig/Transit 474390 ISIS-0
10.10.5.5 474390 ip-
10.10.5.3
(B)10.10.12.2 474389 ip-
10.10.12.3
474390
10.20.1.6
Node Orig/Transit 474391 ISIS-0
10.10.5.5 474391 ip-
10.10.5.3
(B)10.10.12.2 474391 ip-
10.10.12.3
10.20.1.2
Node Orig/Transit 474392 ISIS-0
10.10.12.2 474392 ip-
10.10.12.3
(B)10.10.3.2 474392 ip-
10.10.3.3
Node Terminating 474393 ISIS-0
*A:Dut-C#
*A:Dut-C# tools dump router segment-routing tunnel
====================================================================================
Legend: (B) - Backup Next-hop for Fast Re-Route
(D) Duplicate
====================================================================================
------------------------------------------------------------------------------------
Prefix |
Sid-Type Fwd-Type In-Label Prot-Inst |
Next Hop(s) Out-Label(s) Interface/Tunnel-ID |
------------------------------------------------------------------------------------
Adjacency Transit 262129 ISIS-0
10.10.12.2 3 ip-
10.10.12.3
(B)10.10.3.2 3 ip-
10.10.3.3
Adjacency Transit 262130 ISIS-0
10.10.12.2 3 ip-
10.10.12.3
(B)10.10.3.2 3 ip-
10.10.3.3
Adjacency Transit 262133 ISIS-0
10.10.5.5 3 ip-
10.10.5.3
(B)10.10.12.2 474389 ip-
10.10.12.3
474390
Adjacency Transit 262134 ISIS-0
10.10.5.5 3 ip-
10.10.5.3
(B)10.10.12.2 474389 ip-
10.10.12.3
474390
Adjacency Transit 262135 ISIS-0
10.10.3.2 3 ip-
10.10.3.3
(B)10.10.12.2 3 ip-
10.10.12.3
Adjacency Transit 262136 ISIS-0
10.10.3.2 3 ip-
10.10.3.3
(B)10.10.12.2 3 ip-
10.10.12.3
Adjacency Transit 262137 ISIS-0
10.10.2.1 3 ip-
10.10.2.3
Adjacency Transit 262138 ISIS-0
10.10.2.1 3 ip-
10.10.2.3
10.20.1.4
Node Orig/Transit 474389 ISIS-0
10.10.12.2 474389 ip-
10.10.12.3
(B)10.10.5.5 474389 ip-
10.10.5.3
10.20.1.5
Node Orig/Transit 474390 ISIS-0
10.10.5.5 474390 ip-
10.10.5.3
(B)10.10.12.2 474389 ip-
10.10.12.3
474390
10.20.1.6
Node Orig/Transit 474391 ISIS-0
10.10.5.5 474391 ip-
10.10.5.3
(B)10.10.12.2 474391 ip-
10.10.12.3
10.20.1.2
Node Orig/Transit 474392 ISIS-0
10.10.12.2 474392 ip-
10.10.12.3
(B)10.10.3.2 474392 ip-
10.10.3.3
Node Terminating 474393 ISIS-0
*A:Dut-C#
l2tp
Syntax
l2tp
Context
tools>perform>router
Description
This command enables the context to configure performance tools for L2TP.
peer
Syntax
peer ip-address [{udp-port port | ip}]
Context
tools>perform>router>l2tp
Description
This command configures performance tools for an L2TP peer.
Parameters
ip-address—
Specifies the IP address of the L2TP peer
port—
Specifies the UDP port for the L2TP peer. This parameter is only supported with L2TPv2 peers.
ip—
Enables performance tools for peers using IP transport