2.21. Show, Monitor, Clear, Debug, and Tools Command Reference

2.21.1. Command Hierarchies

2.21.1.1. Show Commands

show
aps [aps-id] [detail]
card slot-number cpu [sample-period seconds]
card slot-number fp fp-number dist-cpu-protection
card slot-number fp fp-number policy-accounting
card slot-number memory-pools
card state
card [slot-number]
card [slot-number] detail
card slot-number fp fp-number fwd-engine drop-reason statistics
card slot-number fp fp-number ingress queue-group mode {access | network}
card slot-number [detail] fp fp-number ingress queue-group queue-group-name instance [instance-number] mode {access | network} [statistics]
cflowd
chassis [environment] [power-supply] [ccm] [chassis-id]
chassis class chassis-class
chassis [detail]
chassis detail [class chassis-class]
power-management [zone]
requirements [detail]
utilization [detail]
datapath slot[/mda[/connector[/port]]] [mac mac-chip-number] [fp fp-number] [detail]
elmi
evc [port-id [vlan vlan-id]]
uni [port-id]
eth-tunnel {aps | status}
eth-tunnel tunnel-index [path path-index] [detail]
fwd-path-ext [fpe fpe-id]
fwd-path-ext fpe fpe-id associations
lag [lag-id] [detail] [statistics]
lag [lag-id] description
lag [lag-id] port
lag lag-id associations per-link-hash interface class {1 | 2 | 3}
lag lag-id associations
lag lag-id bfd
lag lag-id [detail] eth-cfm [tunnel tunnel-id]
lag lag-id associations per-link-hash interface
lag lag-id associations link-map-profile [link-map-profile] interface
lag lag-id lacp-partner
lag lag-id detail lacp-partner
lag lag-id link-map-profile link-map-profile
lag lag-id per-link-hash [class {1 | 2 | 3}]
lag lag-id associations per-link-hash sap [class {1 | 2 | 3}]
lag lag-id associations link-map-profile [link-map-profile] sap
lag lag-id per-link-hash port port-id
macsec
connectivity-association [ca-name] [detail]
mka-session [port port-id]
mka-session [port port-id] detail
mka-session [port port-id] statistics
mda slot[/mda] [detail]
qos {ingress | egress} buffer-allocation [detail]
qos {ingress | egress} orphaned-queues
megapools slot-number fp forwarding-plane wred [detail] queue-group queue-group-name [instance instance-id]
megapools slot-number fp forwarding-plane
megapools slot-number fp forwarding-plane wred [detail] [service-id service-id]
multilink-bundle [bundle-id | bpgrp-id | slot/mda | type {mlppp | ima-grp | mlfr}] [detail]
multilink-bundle {bundle-id | bpgrp-id | slot/mda} [ppp | ima | mlfr]
multilink-bundle {bundle-id | bpgrp-id} relations
ima
atm [detail]
port-connection [detail]
pvc [vpi[/vci]] [detail]
pvp [vpi] [detail]
pvt [vpi.vpi] [detail]
ppp [multiclass]
pcm [pcm-slot] [chassis chassis-id] [detail]
peq [peq-slot] [chassis chassis-id] [detail]
pools mda-id[/port] [access-app [pool-name | service service-id | queue-group queue-group-name [instance id]]]
pools mda-id[/port] [network-app [pool-name | queue-group queue-group-name [instance id]]]
pools mda-id[/port] [direction [pool-name | service service-id | queue-group queue-group-name [instance id]]]
port [port-id] [statistics [egress-aggregate]] [detail]
port port-id associations
port [port-id] description
port port-id dotx1 [detail]
port aps
port [port-id] cem
port port-id atm [detail]
port port-id atm connections
port port-id atm cp [cp] [detail]
port port-id atm ilmi [detail]
port port-id atm interface-connection [detail]
port port-id atm pvc [vpi[/vci]] [detail]
port port-id atm pvp [vpi] [detail]
port port-id atm pvt [vpi1.vpi2] [detail]
port port-id cisco-hldc
port port-id ethernet [associations | detail]
port port-id ethernet [associations | detail] efm-oam event-logs [{failure | degraded}] [{active | cleared}]
port port-id ethernet [associations | detail] lldp [nearest-bridge | nearest-non-tpmr | nearest-customer] [remote-info] [detail]
port port-id frame-relay [detail]
port port-id ima-link
port port-id macsec [statistics] [detail]
port port-id mlfr-link
port port-id monitor-threshold
port port-id optical
port port-id otu
port port-id ppp [detail]
port port-id queue-group [ingress | egress] [queue-group-name] [access | network] [instance instance-id]
port port-id queue-group [ingress | egress] [queue-group-name] [access | network] associations [instance instance-id]
port port-id queue-group [ingress | egress] queue-group-name [access | network] [instance instance-id] queue-depth [queue queue-id]
port port-id queue-group [ingress | egress] [queue-group-name] [access | network] statistics [instance instance-id]
port port-id queue-group summary
port port-id secondary-shaper secondary-shaper-name [statistics | associations]
port port-id vport vport-name monitor-threshold
port port-id wavekey-table {50g | 100g}
port port-id wavelength-table
port port-id wavetracker
port-tree port-id
all
mc-lag peer ip-address [lag lag-id]
mc-lag [peer ip-address [lag lag-id]] statistics
mc-ring peer ip-address statistics
mc-ring peer ip-address [ring sync-tag [detail | statistics]]
mc-ring peer ip-address ring sync-tag ring-node [ring-node-name [detail | statistics]]
mc-ring global-statistics
sync [peer ip-address]
sync peer ip-address detail
sync [peer ip-address] statistics
wpp peer [ip-address] statistics
sfm [sfm-name] [detail]
sfm [sfm-name] icport [down] [degraded]
— system
lldp
lldp neighbor
switch-fabric [exclude-sfm sfm-list]
switch-fabric high-bandwidth-multicast

2.21.1.2. Monitor Commands

For more information about monitor commands, refer to the 7450 ESS, 7750 SR, 7950 XRS, and VSR Basic System Configuration Guide for command usage and CLI syntax.

monitor
card slot-number fp fp-number ingress {access | network} queue-group queue-group-name instance instance-id [interval seconds] [repeat repeat] policer policer-id [absolute | percent-rate [reference-rate]]
port port-id [port-id] [interval seconds] [repeat repeat] [absolute | rate] [multiclass]
port port-id [port-id] atm [aal-5 | cp cp-id | ilmi | interface-connection | pvc vpi/vci [aal-5 | oam] | pvp vpi [aal-5 | oam] | pvt vpi1.vpi2] [interval seconds] [repeat repeat] [absolute | rate]
port all-ethernet-rates [interval seconds] [repeat repeat]
queue-group queue-group-name egress access [instance instance-id] [egress-queue egress-queue-id] [interval seconds] [repeat repeat] [absolute | rate]
queue-group queue-group-name ingress access ingress-queue ingress-queue-id [interval seconds] [repeat repeat] [absolute | rate]
queue-group queue-group-name egress network instance instance-id [policer policer-id] [egress-queue egress-queue-id] [interval seconds] [repeat repeat] [absolute | rate]
vport name [interval seconds] [repeat repeat] [absolute | rate]
vport name [interval seconds] [repeat repeat] monitor-threshold

2.21.1.3. Clear Commands

clear
card slot-number
card slot-number fp fp-number dist-cpu-protection
card slot-number soft [hard-reset-unsupported-mdas]
card slot-number fp fp-number fwd-engine drop-reason statistics
card slot-number fp fp-number ingress mode {access | network} queue-group group-name instance instance statistics
lag lag-id statistics
lag lag-id bfd-session family {ipv4 | ipv6} lag-port port-id
mda mda-id [statistics]
port {port-id | bundle-id | bpgrp-id | aps-id} atm
port {port-id | bundle-id | bpgrp-id | aps-id} statistics
port port-id ethernet dampening
port port-id ethernet efm-oam events [local | remote]
port port-id exp-secondary-shaper shaper-name statistics
port port-id fwd-engine drop-reason statistics
port port-id monitor-threshold
port port-id hs-secondary-shaper shaper-name statistics
port port-id hs-pool high-water-mark {[standard 1..6] | [alternate 1..6]}
port port-id phy-state-change-count
port port-id queue-group queue-group-name [instance instance-id] queue-depth [queue queue-id] {ingress | egress} [access | network]
port port-id queue-group queue-group-name [instance instance-id] [access | network] {ingress | egress} statistics
port port-id vport [name] monitor-threshold
port port-id vport name statistics

2.21.1.4. Debug Commands

debug
[no] atm
ilmi [port-id]
— no ilmi port-id
cisco-hdlc port-id
— no cisco-hdlc
[no] frame-relay
[no] frf16 port-id
lmi [port-id]
— no lmi
lag [lag-id lag-id [port port-id]] [all]
lag [lag-id lag-id [port port-id]] [sm] [pkt] [cfg] [red] [iom-upd] [port-state] [timers] [sel-logic] [mc] [mc-pkt]
— no lag [lag-id lag-id]
ppp port-id
— no ppp [port-id]

2.21.1.5. Tools Commands

tools
— dump
aps aps-id [clear]
aps mc-aps-signaling [clear]
aps mc-aps-ppp [clear]
eth-tunnel tunnel-index [clear]
lag lag-id lag-id
map-to-phy-port {ccag ccag-id | lag lag-id | eth-tunnel tunnel-index} {isid isid [end-isid isid] | service service-id | svc-name [end-service service-id | svc-name]} [summary]
port port-id
dwdm
pcs [clear]
rs-fec [clear]
srrp-sync-database [instance instance-id] [peer ip-address]
sync-database [peer ip-address] [port port-id | lag-id] [sync-tag sync-tag] [application application] [detail] [type type]
sync-database [peer ip-address] [sdp sdp-id] [sync-tag sync-tag] [application application] [detail] [type type]
tools
— perform
aps
clear aps-id {protect | working} [number number]
exercise aps-id {protect | working}
force aps-id {protect | working} [number number]
lockout aps-id
lockout-annexb aps-id
request aps-id {protect | working}
clear ring-index
force ring-index path {a | b}
manual ring-index path {a | b}
ima
reset bundle-id
lag
clear-force all-mc
clear-force lag-id lag-id [sub-group sub-group-id]
clear-force peer-mc ip-address
force all-mc {active | standby}
force lag-id lag-id [sub-group sub-group-id] {active | standby}
force peer-mc ip-address {active | standby}
load-balance lag-id lag-id [class {1 | 2 | 3}]

2.21.2. Command Descriptions

Note:

The command outputs in this chapter are examples only; actual displays may differ depending on supported functionality and user configuration.

2.21.2.1. Hardware Show Commands

chassis

Syntax 
chassis [environment] [power-supply]
chassis [detail]
chassis [environment] [chassis-id] [ccm]
chassis detail [class chassis-class]
chassis class chassis-class
Context 
show
Description 

This command displays general chassis status information.

Parameters 
chassis-id—
Specifies chassis 1, 2, etc for the router chassis.
chassis-class—
Shows information related to chassis of the specified class.
Values—
router, or eth-sat

 

environment—
Shows chassis environmental status information.
Default—
Shows all chassis information.
power-supply—
Shows chassis power supply status information.
Default—
Shows all chassis information.
detail—
Displays detailed information for all chassis in the system.
ccm—
Shows chassis control module information. Only supported on platforms that have CCMs.
Output 
Sample Output: show chassis (showing 7750 SR)
A:PE-1# show chassis 
===============================================================================
System Information
===============================================================================
  Name                              : PE-1
  Type                              : 7750 SR-12
  Chassis Topology                  : Standalone
  Location                          : (Not Specified)
  Coordinates                       : (Not Specified)
  CLLI code                         :           
  Number of slots                   : 12
  Oper number of slots              : 12
  Num of faceplate ports/connectors : 97
  Num of physical ports             : 97
  Critical LED state                : Off
  Major LED state                   : Off
  Minor LED state                   : Off
  Over Temperature state            : OK
  Base MAC address                  : 10:e8:78:b8:21:47
  Admin chassis mode                : d
  Oper chassis mode                 : d
  Fabric Speed                      : 10 Gig
  FP Generations                    : FP3 
  System Profile                    : none
===============================================================================
Chassis Summary
===============================================================================
Chassis   Role                Status
-------------------------------------------------------------------------------
1         Standalone          up
===============================================================================
A:PE-1#
Sample Output: show chassis environment
A:SR-12# show chassis environment
 ===============================================================================
 Chassis 1 Detail
 ===============================================================================
 Environment Information
   Number of fan trays : 3
   Number of fans : 6
   Fan tray number : 1
     Speed : 44 %
     Status : up
   Fan tray number : 2
     Speed : 44 %
     Status : up
   Fan tray number : 3
     Speed : 44 %
     Status : up
 ===============================================================================
Sample Output: show chassis power-supply
A:ALA-4# show chassis power-supply
===============================================================================
Chassis Information
===============================================================================
Power Supply Information
    Number of power supplies      : 2                                          
 
    Power supply number           : 1                                          
    Defaulted power supply type   : dc 
    Status                        : up 
 
    Power supply number           : 2                                          
    Defaulted power supply type   : dc                                         
    Status                        : up                                         
===============================================================================
A:ALA-4#
Sample Output: show chassis ccm
A:7750-3# show chassis ccm 
===============================================================================
Chassis Information
===============================================================================
Chassis Control Module (CCM) Information
    CCM number                    : 1                                          
    Equipped                      : yes                                        
    Type                          : ccm-xp                           
 
Hardware Data
    Part number                   : Sim Part#                                  
    CLEI code                     : Sim CLEI                                   
    Serial number                 : ccm-0                                      
    Manufacture date              : 01012003                                   
    Manufacturing string          : Sim MfgString ccm-0                        
    Manufacturing deviations      : Sim MfgDeviation ccm-0                     
    Administrative state          : up                                         
    Operational state             : up                                         
    Temperature                   : 32C                                        
    Temperature threshold         : 75C                                        
    Time of last boot             : N/A                                        
    Current alarm state           : alarm cleared                              
===============================================================================
A:7750-3>
Sample Output: show chassis (showing 7950 XRS)
*A:PE-1# show chassis 
===============================================================================
System Information
===============================================================================
  Name                              : PE-1
  Type                              : 7950 XRS-20
  Chassis Topology                  : Standalone
  Location                          : (Not Specified)
  Coordinates                       : (Not Specified)
  CLLI code                         :           
  Number of slots                   : 24
  Oper number of slots              : 12
  Num of faceplate ports/connectors : 314
  Num of physical ports             : 314
  Critical LED state                : Off
  Major LED state                   : Off
  Minor LED state                   : Amber
  Over Temperature state            : OK
  Base MAC address                  : 24:af:4a:a3:ac:c5
  FP Generations                    : FP3 
  System Profile                    : none
===============================================================================
Chassis Summary
===============================================================================
Chassis   Role                Status
-------------------------------------------------------------------------------
1         Standalone          up
===============================================================================
*A:PE-1# 
Sample Output: show chassis detail (showing 7950 XRS)
*A:PE-1# show chassis detail 
===============================================================================
System Information
===============================================================================
  Name                              : PE-1
  Type                              : 7950 XRS-20
  Chassis Topology                  : Standalone
  Location                          : (Not Specified)
  Coordinates                       : (Not Specified)
  CLLI code                         :           
  Number of slots                   : 24
  Oper number of slots              : 12
  Num of faceplate ports/connectors : 314
  Num of physical ports             : 314
  Critical LED state                : Off
  Major LED state                   : Off
  Minor LED state                   : Amber
  Over Temperature state            : OK
  Base MAC address                  : 24:af:4a:a3:ac:c5
  FP Generations                    : FP3 
  System Profile                    : none
===============================================================================
Chassis 1 Detail
===============================================================================
  Chassis Status                    : up
  Chassis Role                      : Standalone
  Hardware Data
    Part number                     : 
    CLEI code                       : 
    Serial number                   : AME4-14
    Manufacture date                : 
    Manufacturing deviations        : (Not Specified)
    Manufacturing assembly number   : 
    Time of last boot               : 2017/10/23 12:29:41
    Current alarm state             : alarm active
-------------------------------------------------------------------------------
Environment Information
  Number of fan trays               : 2
  Number of fans                    : 16
                                      
  Fan tray number                   : 1
    Speed                           : 38 %
    Status                          : up
    Hardware Data
      Part number                   : 3HE07119AARB01
      CLEI code                     : IPUCA9U1AA
      Serial number                 : NS131062838
      Manufacture date              : 03212013
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 82-0354-03
      Administrative state          : up
      Operational state             : up
      Time of last boot             : 2017/10/23 12:27:47
      Current alarm state           : alarm cleared
      Firmware revision status      : acceptable
    Hardware Resources (Power-Zone 1)
      Voltage
        Minimum                     :    53.00 Volts  (10/23/2017 12:30:28)
        Current                     :    53.00 Volts 
        Peak                        :    54.00 Volts  (10/23/2017 12:29:48)
      Wattage
        Minimum                     :   106.00 Watts  (10/23/2017 12:30:28)
        Current                     :   159.00 Watts 
        Peak                        :   324.00 Watts  (10/23/2017 12:29:48)
        Max Required                :   900.00 Watts 
      Amperage
        Minimum                     :     2.00 Amps   (10/23/2017 12:29:56)
        Current                     :     3.00 Amps   
        Peak                        :     6.00 Amps   (10/23/2017 12:29:48)
  
  Fan tray number                   : 2
    Speed                           : 38 %
    Status                          : up
   Hardware Data
      Part number                   : 3HE07119AARB01
      CLEI code                     : IPUCA9U1AA
      Serial number                 : NS152062365
      Manufacture date              : 05232015
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 82-0354-03
      Administrative state          : up
      Operational state             : up
      Time of last boot             : 2017/10/23 12:27:25
      Current alarm state           : alarm cleared
     Firmware revision status      : acceptable
    Hardware Resources (Power-Zone 1)
      Voltage
        Minimum                     :    52.00 Volts  (10/23/2017 12:32:01)
        Current                     :    52.00 Volts 
        Peak                        :    54.00 Volts  (10/23/2017 12:29:54)
      Wattage
        Minimum                     :   106.00 Watts  (10/23/2017 12:30:05)
        Current                     :   156.00 Watts 
        Peak                        :   371.00 Watts  (10/23/2017 12:29:51)
        Max Required                :   900.00 Watts 
      Amperage
        Minimum                     :     2.00 Amps   (10/23/2017 12:29:54)
        Current                     :     3.00 Amps   
        Peak                        :     7.00 Amps   (10/23/2017 12:29:51)
-------------------------------------------------------------------------------
Power Management Information
  Power Management Mode             : basic
  Power Safety Level                : 100%
  Power Safety Alert                : 0 watts
  Number of PEQs                    : 12
  
  PEQ number                        : 1
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0116
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:33
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 2
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1249G0022
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:26
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 3
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0141
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:31
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 4
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1249G0201
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:26
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 5
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
   Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0123
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:32
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 6
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0061
      Manufacture date              : 12182012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:34
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 7
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARB01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS13226A310
      Manufacture date              : 06042013
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 82-0532-02
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:33
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 8
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
   Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0152
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:29
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 9
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0122
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:28
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 10
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0146
      Manufacture date              : 12202012
     Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:25
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 11
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1249G0202
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:30
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
  
  PEQ number                        : 12
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : input B down
    Input Power Mode                : N/A
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0115
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2017/10/23 12:27:29
      Current alarm state           : alarm active
      Firmware revision status      : acceptable
-------------------------------------------------------------------------------
Chassis Control Module (CCM) Information
  
  CCM Slot                          : A
    Equipped                        : yes
    Hardware Data
      Part number                   : 82-0263-03
      CLEI code                     : 
      Serial number                 : AQUA03-30
      Manufacture date              : 
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 
      Administrative state          : up
      Operational state             : up
      Temperature                   : 45C
      Temperature threshold         : 75C
      Time of last boot             : N/A
      Current alarm state           : alarm cleared
    Hardware Resources (Power-Zone 1)
      Voltage
        Minimum                     :    51.67 Volts  (10/23/2017 12:31:59)
        Current                     :    51.67 Volts 
        Peak                        :    52.68 Volts  (10/23/2017 12:29:52)
      Wattage
        Minimum                     :    21.29 Watts  (10/23/2017 12:30:20)
        Current                     :    21.98 Watts 
        Peak                        :    22.66 Watts  (10/23/2017 12:29:50)
        Max Required                :    22.00 Watts 
      Amperage
        Minimum                     :     0.41 Amps   (10/23/2017 12:30:20)
        Current                     :     0.43 Amps   
        Peak                        :     0.43 Amps   (10/23/2017 12:29:50)
  
  CCM Slot                          : B
    Equipped                        : yes
    Hardware Data
      Part number                   : 82-0263-03
      CLEI code                     : 
      Serial number                 : AQUA03-10
      Manufacture date              : 
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 
      Administrative state          : up
      Operational state             : up
      Temperature                   : 44C
      Temperature threshold         : 75C
      Time of last boot             : N/A
      Current alarm state           : alarm cleared
    Hardware Resources (Power-Zone 1)
      Voltage
        Minimum                     :    51.63 Volts  (10/23/2017 12:32:00)
        Current                     :    51.63 Volts 
        Peak                        :    52.59 Volts  (10/23/2017 12:30:14)
      Wattage                         
        Minimum                     :    22.66 Watts  (10/23/2017 12:30:40)
        Current                     :    23.35 Watts 
        Peak                        :    23.35 Watts  (10/23/2017 12:30:14)
        Max Required                :    22.00 Watts 
      Amperage
        Minimum                     :     0.45 Amps   (10/23/2017 12:30:14)
        Current                     :     0.46 Amps   
        Peak                        :     0.46 Amps   (10/23/2017 12:31:32)
===============================================================================
*A:PE-1#
Sample Output: show chassis (showing 7750 SR with Ethernet satellites configured)
*A:PE-1# show chassis 
===============================================================================
System Information
===============================================================================
  Name                              : PE-1
  Type                              : 7750 SR-12
  Chassis Topology                  : Standalone
  Location                          : (Not Specified)
  Coordinates                       : (Not Specified)
  CLLI code                         :           
  Number of slots                   : 12
  Oper number of slots              : 12
  Num of faceplate ports/connectors : 165
  Num of physical ports             : 165
  Critical LED state                : Off
  Major LED state                   : Off
  Minor LED state                   : Off
  Over Temperature state            : OK
  Base MAC address                  : 10:e8:78:b8:21:47
  Admin chassis mode                : d
  Oper chassis mode                 : d
  Fabric Speed                      : 10 Gig
  FP Generations                    : FP3 
  System Profile                    : none
===============================================================================
Chassis Summary
===============================================================================
Chassis   Role                Status
-------------------------------------------------------------------------------
1         Standalone          up
esat-1    Ethernet Satellite  up
===============================================================================
*A:PE-1#
Output Fields: show chassis

Table 47 describes the output fields for the show chassis command.

Table 47:  Output Fields: show chassis 

Label

Description  

Name

The system name for the router.

Type

Displays the router model number.

Chassis Topology

Indicates the inter-chassis topology mode in which the system is operating.

Standalone indicates that the system is comprised of a single physical router chassis.

Extended (XRS-40) on a 7950 XRS based system indicates that two router chassis are connected together in a “back-to-back” topology with no additional switch fabric chassis. An extended chassis topology is comprised of two XRS-20 chassis and is also known as an XRS-40 system.

Chassis role

Specifies the Chassis Roles.

Standalone — Specifies the value for all non-7950 XRS SR OS systems and for 7950 XRS-20 standalone systems.

7950 XRS-40 Master

7950  XRS-40 Extension

Location

The system location for the device.

Coordinates

A user-configurable string that indicates the Global Positioning System (GPS) coordinates for the location of the chassis.

For example:

  1. N 45 58 23, W 34 56 12
  2. N37 37' 00 latitude, W122 22' 00 longitude
  3. N36*39.246' W121*40.121'

CLLI Code

The Common Language Location Identifier (CLLI) that uniquely identifies the geographic location of places and certain functional categories of equipment unique to the telecommunications industry.

Number of slots

The number of slots in the 7450 ESS and 7750 SR chassis that are available for plug-in cards. The total number includes the IOM/CCM slot(s) and the CPM/CFM slots.

Number of ports

The total number of ports currently installed in this chassis. This count does not include the Ethernet ports on the CPMs/CFMs/CCMs that are used for management access.

Oper Number of Slots

The number of slots in the 7950 XRS chassis that are available for XCM cards and CPM cards operating as the active or standby CPM. Oper Number of Slots goes to 24 when Chassis Topology is Extended.

Critical LED state

The current state of the Critical LED in this chassis.

Major LED state

The current state of the Major LED in this chassis.

Minor LED state

The current state of the Minor LED in this chassis.

Base MAC address

The base chassis Ethernet MAC address.

FP Generations

Identifies the FP generations for cards in the system.

System Profile

The scaling profile in use by the system.

Over Temperature state

Indicates if there is currently an over temperature condition (OK = not currently over temp).

Admin chassis mode

The configured chassis mode (chassis mode D).

Oper chassis mode

The current chassis mode.

Part number

The part number of the particular hardware assembly. In the show chassis output, the first set of Hardware Data output is for the chassis mid-plane.

CLEI code

The Common Language Equipment Code of the particular hardware assembly.

Serial number

The serial number of the particular hardware assembly.

Manufacture date

The manufacture date of the particular hardware assembly.

Manufacturing string

The factory inputted manufacturing text string for the particular hardware assembly.

Manufacturing deviations

Additional manufacturing data.

Manufacturing assembly number

Additional manufacturing data.

Time of last boot

The date and time the most recent boot occurred.

Current alarm state

Displays the alarm conditions for the specific board.

Number of fan trays

The total number of fan trays installed in this chassis.

Number of fans

The total number of fans installed in this chassis.

Fan tray number

The ID for each fan tray installed in the chassis

Fan tray type

Indicates the type of fan tray:

Chassis - standard fan tray

PCM - dedicated to cooling PCMs in the 7950 XRS-20e Universal chassis

Operational status

Current status of the fan tray.

Speed

Indicates the speed of the fans as a percentage.

Status

Current status of the particular hardware assembly (up, down, or not equipped).

Number of power supplies

The number of power supplies installed in the chassis.

Power supply number

The ID for each power supply installed in the chassis.

Power supply type

The basic type of the power supply.

Power supply model

The model of the power supply.

CCM Slot

The identifier of the CCM (A or B).

Equipped

Indicates if the CCM is detected as physically present.

Temperature

The current temperature detected by the particular hardware assembly.

Temperature threshold

The temperature at which the particular hardware assembly considers an over temperature condition to exist.

CCM

Number of Chassis Control Modules on this unit (for the 7750 SR-c12 and 7750 SR-c4 only).

Part number

The CCM part number.

CLEI code

The code used to identify the router.

Serial number

The CCM serial number. Not user modifiable.

Manufacture date

The chassis manufacture date. Not user modifiable.

Manufacturing string

Factory-inputted manufacturing text string. Not user modifiable.

Administrative state

Up — The card is administratively up.

Down — The card is administratively down.

Operational state

Up — The card is operationally up.

Down — The card is operationally down.

Temperature

The internal chassis temperature.

Temperature threshold

The value above which the internal temperature must rise in order to indicate that the temperature is critical.

Time of last boot

The date and time the most recent boot occurred.

Current alarm state

Displays the alarm conditions for the CCM.

datapath

Syntax 
datapath slot[/mda[/connector[/port]]] [mac mac-chip-number] [fp fp-number] [detail]
Context 
show
Description 

This command displays the data path mapping for the specified card, MDA, FP, MAC, connector, and port combinations. Fully qualified port identifiers are displayed for ports when the detail or port parameters are specified.

This command is supported on FP4-based hardware only.

Parameters 
slot—
Specifies the slot number of the card in the chassis to display. The maximum slot number is platform dependent. See the Installation Guides for more information.
Values—
1 to 10

 

mda—
Specifies the MDA number in the slot to display. This is an integer value relative to the card.
Values—
1 to 2

 

connector—
Specifies the connector number to display. This is an integer value relative to the MDA.
Values—
c1 to c36

 

port—
Specifies the connector port number to display. The full port identifier is displayed. This is an integer value relative to the connector.
Values—
1 to 10

 

fp-number—
Specifies the FP number to display. This is an integer value relative to the card.
Values—
1 to 6

 

mac-chip-number—
Specifies the MAC number to display. This is an integer value relative to the MDA.
Values—
1 to 12

 

detail—
Displays the full port identifiers for all ports with configured connectors.
Output 

The following output is an example of the show datapath command.

Sample Output:
*A:PE# show datapath 1/2/c1/1
 
===============================================================================
Card      MDA       FP        MAC Chip Num   Connector      Ports
-------------------------------------------------------------------------------
1         2         1         1              c1             1/2/c1/1
===============================================================================
*A:PE# show datapath 1/2 fp 1
 
===============================================================================
Card      MDA       FP        MAC Chip Num   Connector      Ports
-------------------------------------------------------------------------------
1         2         1         1              c1
1         2         1         1              c2
1         2         1         1              c3
1         2         1         1              c4
1         2         1         1              c5
1         2         1         1              c6
===============================================================================
*A:PE# show datapath 1/2 mac 1 detail
 
===============================================================================
Card      MDA       FP        MAC Chip Num   Connector      Ports
-------------------------------------------------------------------------------
1         2         1         1              c1             1/2/c1/1
1         2         1         1              c2             1/2/c2/1
1         2         1         1              c3             1/2/c3/1
1         2         1         1              c4             1/2/c4/1
1         2         1         1              c5             1/2/c5/1
1         2         1         1              c6             1/2/c6/1
===============================================================================
*A:PE#

power-management

Syntax 
power-management [zone]
Context 
show>chassis
Description 

This command shows the power management requirement and utilization information for the 7950 XRS.

Parameters 
zone—
The chassis power zone.
Values—
1, 2

 

Output 

The following output is an example of power management information, and Table 48 describes the output fields.

Sample Output: show chassis power-management
*A:Dut-A#  show chassis power-management 
 
===============================================================================
Chassis Information
===============================================================================
Power Management Information
 
  Power Management Mode             : basic
  Power Safety Level                : 100%
  Power Safety Alert                : 0 watts
  Power-Zone                        : 1
  Number of PEQs                    : 12
  
  PEQ number                        : 1
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : apeq-dc-2000
    Status                          : shutdown
    Input Feed Status               : input B down
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0116
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
     Manufacturing assembly number : 8205320107
      Administrative state          : down
      Operational state             : down
      Time of last boot             : 2014/01/07 11:01:44
      Current alarm state           : alarm active
  
  PEQ number                        : 2
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : (Not Specified)
    Status                          : up
    Input Feed Status               : input B down
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1249G0022
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : unprovisioned
      Time of last boot             : 2014/01/07 11:01:44
      Current alarm state           : alarm active
  
  PEQ number                        : 3
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : apeq-dc-2000
    Status                          : up
    Input Feed Status               : input B down
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0141
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : up
      Time of last boot             : 2014/01/07 11:01:44
      Current alarm state           : alarm active
  
  PEQ number                        : 4
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : apeq-dc-2000
    Status                          : up
    Input Feed Status               : input B down
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1249G0201
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : up
      Time of last boot             : 2014/01/07 11:01:44
      Current alarm state           : alarm active
                                      
  PEQ number                        : 5
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : apeq-dc-2000
    Status                          : up
    Input Feed Status               : input B down
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0123
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : up
      Time of last boot             : 2014/01/07 11:01:44
      Current alarm state           : alarm active
  
  PEQ number                        : 6
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : apeq-dc-2000
    Status                          : up
    Input Feed Status               : input B down
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0061
      Manufacture date              : 12182012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : up
      Time of last boot             : 2014/01/07 11:01:44
      Current alarm state           : alarm active
  
  PEQ number                        : 7
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : apeq-dc-2000
    Status                          : up
    Input Feed Status               : input B down
    Hardware Data                     
      Part number                   : 3HE07114AARB01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS13226A310
      Manufacture date              : 06042013
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 82-0532-02
      Administrative state          : up
      Operational state             : up
      Time of last boot             : 2014/01/07 11:01:44
      Current alarm state           : alarm active
  
  PEQ number                        : 8
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : apeq-dc-2000
    Status                          : up
    Input Feed Status               : input B down
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0152
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : up
      Time of last boot             : 2014/01/07 11:01:44
      Current alarm state           : alarm active
  
  PEQ number                        : 9
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : apeq-dc-2000
    Status                          : up
    Input Feed Status               : input B down
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0122
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : up
      Time of last boot             : 2014/01/07 11:01:44
      Current alarm state           : alarm active
  
  PEQ number                        : 10
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : apeq-dc-2000
    Status                          : up
    Input Feed Status               : input B down
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0146
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : up
      Time of last boot             : 2014/01/07 11:01:44
      Current alarm state           : alarm active
  
  PEQ number                        : 11
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : apeq-dc-2000
    Status                          : up
    Input Feed Status               : input B down
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1249G0202
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : up
      Time of last boot             : 2014/01/07 11:01:44
      Current alarm state           : alarm active
  
  PEQ number                        : 12
    PEQ Equipped Type               : apeq-dc-2000
    PEQ Provisioned Type            : apeq-dc-2000
    Status                          : up
    Input Feed Status               : input B down
    Hardware Data
      Part number                   : 3HE07114AARA01
      CLEI code                     : IPUPAJHUAA
      Serial number                 : NS1250G0115
      Manufacture date              : 12202012
      Manufacturing deviations      : (Not Specified)
      Manufacturing assembly number : 8205320107
      Administrative state          : up
      Operational state             : up
      Time of last boot             : 2014/01/07 11:01:44
      Current alarm state           : alarm active
===============================================================================
 
  PCM number                        : 1
    PCM Equipped Type               : not detected
    PCM Provisioned Type            : (not provisioned)
  PCM number                        : 2
    PCM Equipped Type               : not detected)
    PCM Provisioned Type            : (not provisioned)
    
  PCM number                        : 3
    PCM Equipped Type               : not detected 
    PCM Provisioned Type            : (not provisioned)
  PCM number                        : 4
    PCM Equipped Type               : not detected 
    PCM Provisioned Type            : (Not provisioned)
  PCM number                        : 5
    PCM Equipped Type               : not detected 
    PCM Provisioned Type            : (Not provisioned)
  PCM number                        : 6
    PCM Equipped Type               : indeterminate
    PCM Provisioned Type            : (Not provisioned)
  PCM number                        : 7
    PCM Equipped Type               : indeterminate
    PCM Provisioned Type            : (Not provisioned)
  PCM number                        : 8
    PCM Equipped Type               : indeterminate
    PCM Provisioned Type            : (Not provisioned)
  PCM number                        : 9
    PCM Equipped Type               : indeterminate
    PCM Provisioned Type            : dual-pcm
  PCM number                        : 10
    PCM Equipped Type               : quad-pcm
    PCM Provisioned Type            : (Not provisioned)
    Power-Zone                      : 1
    Status                          : up
    Input Feed Status               : power to all inputs 
Hardware Data
      Part number                   : Sim Part#
      CLEI code                     : Sim CLEI
      Serial number                 : peq-12
      Manufacture date              : 01012003
      Manufacturing deviations      : Sim MfgDeviation peq-12
      Manufacturing assembly number : 01-2345-67
 
 
  PCM number                        : 11 
    PCM Equipped Type               : quad-pcm 
    PCM Provisioned Type            : quad-pcm  
    Power-Zone                      : 1 
    Status                          : up 
    Input Feed Status               : power to all inputs  
    Hardware Data 
      Part number                   : Sim Part# 
      CLEI code                     : Sim CLEI 
      Serial number                 : peq-12 
      Manufacture date              : 01012003 
      Manufacturing deviations      : Sim MfgDeviation peq-12 
      Manufacturing assembly number : 01-2345-67 
 
  PCM number                        : 12 
    PCM Equipped Type               : quad-pcm 
    PCM Provisioned Type            : quad-pcm  
    Power-Zone                      : 1 
    Status                          : up 
    Input Feed Status               : power to all inputs  
    Hardware Data 
      Part number                   : Sim Part# 
      CLEI code                     : Sim CLEI 
      Serial number                 : peq-12 
      Manufacture date              : 01012003 
      Manufacturing deviations      : Sim MfgDeviation peq-12 
      Manufacturing assembly number : 01-2345-67 
 
 
------------------------------------------------------------------------------- 
Chassis Control Module (CCM) Information 
   
  CCM Slot                          : A 
    Equipped                        : yes 
    Hardware Data 
      Part number                   : Sim Part# 
      CLEI code                     : Sim CLEI 
      Serial number                 : ccm-1 
      Manufacture date              : 01012003 
      Manufacturing deviations      : Sim MfgDeviation ccm-1 
      Manufacturing assembly number : 01-2345-67 
      Administrative state          : up 
      Operational state             : up 
      Temperature                   : -128C 
      Temperature threshold         : 75C 
      Time of last boot             : N/A 
      Current alarm state           : alarm cleared 
    Hardware Resources (Power-Zone 1) 
      Voltage 
        Minimum                     :    52.80 Volts  (09/10/2014 18:09:58) 
        Current                     :    52.80 Volts  
        Peak                        :    52.80 Volts  (09/10/2014 18:09:58) 
      Wattage 
        Minimum                     :    20.00 Watts  (09/10/2014 18:09:58) 
        Current                     :    20.00 Watts  
        Peak                        :    20.00 Watts  (09/10/2014 18:09:58) 
        Max Required                :    22.00 Watts  
      Amperage 
        Minimum                     :     0.38 Amps   (09/10/2014 18:09:58) 
        Current                     :     0.38 Amps    
        Peak                        :     0.38 Amps   (09/10/2014 18:09:58) 
   
  CCM Slot                          : B 
    Equipped                        : yes 
    Hardware Data 
      Part number                   :  
      CLEI code                     :  
      Serial number                 :  
      Manufacture date              :  
      Manufacturing deviations      : (Not Specified) 
      Manufacturing assembly number :  
      Administrative state          : up 
      Operational state             : up 
      Temperature                   : 0C 
      Temperature threshold         : 75C 
      Time of last boot             : N/A 
      Current alarm state           : alarm cleared 
    Hardware Resources (Power-Zone 1) 
      Voltage 
        Minimum                     :     0.00 Volts  (N/A) 
        Current                     :     0.00 Volts  
        Peak                        :     0.00 Volts  (N/A) 
      Wattage 
        Minimum                     :     0.00 Watts  (N/A) 
        Current                     :     0.00 Watts  
        Peak                        :     0.00 Watts  (N/A) 
        Max Required                :     0.00 Watts  
      Amperage 
        Minimum                     :     0.00 Amps   (N/A) 
        Current                     :     0.00 Amps    
        Peak                        :     0.00 Amps   (N/A) 
=============================================================================== 
Chassis 2 Detail 
=============================================================================== 
Table 48:  Output Fields: show chassis power-management  

Label

Description

Power Management Mode

Specifies the configured power management mode: None, Basic, or Advanced.

Power Safety Level

Specifies the configured Power Safety Level, which is a percentage of the worst case power consumption level.

Power Safety Alert

Specifies the configured power level in watts, which causes the system to raise an alarm if the available power level drops below a set level.

Power-Zone

Specifies the chassis power zone.

Number of PEQs

Specifies the total number of APEQs installed.

PEQ number:

Specifies the APEQ to which the information is associated

PEQ Equipped Type

Specifies the APEQ type installed.

PEQ Provisioned Type

Specifies the APEQ type provisioned.

Status

Specifies the APEQ status.

Input Feed Status

Specifies the feed status. This field indicates that power is detected on all inputs or lists the inputs where no power is detected.

PCM Equipped Type

Indicates the type of PCM installed in the specified PIM or PCM slot:

  1. (empty slot)
  2. indeterminate
  3. quad-pcm

Some PCMs can only be verified for presence based on power available at the associated APEQ. These are indicated as indeterminate.

When the equipped type is quad-pcm, the additional fields of Power-Zone, Status, and Input Feed Status and Hardware Data are displayed.

PCM Provisioned Type

One of the following types:

  1. (not specified)
  2. dual-pcm
  3. quad-pcm

For a given PCM number, if the equipped type is not detected and the provisioned type is not specified, the PCM is not displayed.

Hardware Data:

Part number

The APEQ part number.

CLEI code

The APEQ CLEI code.

Serial number

The APEQ serial number.

Manufacture date

The date the APEQ was manufactured.

Manufacturing deviations

Specifies any manufacturing deviations.

Manufacturing assembly number

The APEQ assembly number.

Administrative state

Specifies the administrative state of the APEQ.

Operational state

Specifies the operational state of the APEQ.

Time of last boot

Indicates the time stamp of the last system restart.

Current alarm state

Indicates the current alarm state.

requirements

Syntax 
requirements [detail]
Context 
show>chassis>power-management
Description 

This command displays maximum power requirements for the installed devices.

Parameters 
detail—
Displays detailed information.
Output 

The following output is an example of power management requirements information, and Table 49 describes the output fields.

Sample Output: show chassis power-management requirements
*A:Dut-A#   show chassis power-management requirements 
 
===============================================================================
Chassis Power Requirements
===============================================================================
              SUPPLY                               REQUIREMENTS
Power Capacity   : 22000.00 Watts        Fan           :  1800.00 Watts (  8%)
Safety Level     : 13203.00 Watts (100%) IO Module     :  1395.00 Watts (  6%)
Alert Level      :     0.00 Watts        CPM Module    :   408.00 Watts (  2%)
                                         Fabric Module :  1600.00 Watts (  7%)
                                         MDA Module    :  7956.00 Watts ( 36%)
                                         CCM Module    :    44.00 Watts (  0%)
                                         Total Required: 13203.00 Watts ( 60%)
===============================================================================
 
 
Table 49:  Output Fields: show chassis power-management requirements  

Label

Description

SUPPLY

Power Capacity

Indicates the total amount of power available to the chassis.

Safety Level

Specifies the configured Power Safety Level, which is a percentage of the worst case power consumption level.

Alert Level

Specifies the configured power level in watts, which causes the system to raise an alarm if the available power level drops below a set level.

REQUIREMENTS

Fan

Specifies the amount of power required for each fan tray.

IO Module

Specifies the amount of power required for each IO Module.

CPM Module

Specifies the amount of power required for each CPM.

Fabric Module

Specifies the amount of power required for each SFM.

MDA Module

Specifies the amount of power required for each line card.

Total Required

Specifies the total amount of power required for all system elements.

utilization

Syntax 
utilization [detail]
Context 
show>chassis>power-management
Description 

This command displays power management utilization.

Parameters 
detail—
Displays detailed breakdown of devices.
Output 

The following output is an example of power management utilization information, and Table 50 describes the output fields.

Sample Output: show chassis power-management utilization
*A:Dut-A# show chassis power-management utilization 
===============================================================================
Chassis Power Utilization
===============================================================================
              SUPPLY                               PEAK DEMAND 
Power Capacity   : 22000.00 Watts        Fan           :   695.00 Watts (  3%)
Safety Level     : 13203.00 Watts (100%) IO Module     :  7163.09 Watts ( 33%)
Alert Level      :     0.00 Watts        CPM Module    :   392.86 Watts (  2%)
                                         Fabric Module :  1622.25 Watts (  7%)
                                         MDA Module    :  6023.07 Watts ( 27%)+
                                         CCM Module    :    50.82 Watts (  0%)
                                         Peak Util.    :  9924.02 Watts ( 45%)
                                                   CURRENT DEMAND
                                         Current Util. :  9623.01 Watts ( 44%)
===============================================================================
+  Power utilization of device already included in IO Module value
===============================================================================
Sample Output: show chassis power-management utilization detail
*A:Dut-A# show chassis power-management utilization detail 
===============================================================================
Chassis Power Utilization (detail)
===============================================================================
              SUPPLY                               PEAK DEMAND 
Power Capacity   : 22000.00 Watts        Fan           
  Power Supply 1 :     0.00 Watts          Fan 1       :   324.00 Watts (  1%)
  Power Supply 2 :  2000.00 Watts          Fan 2       :   371.00 Watts (  2%)
  Power Supply 3 :  2000.00 Watts          Fan 3       :   372.00 Watts (  2%)
  Power Supply 4 :  2000.00 Watts          PCM Fan 1   :   50.00 Watts (  2%)
  Power Supply 5 :  2000.00 Watts          PCM Fan 2   :   50.00 Watts (  2%)
  Power Supply 6 :  2000.00 Watts        IO Module     
  Power Supply 7 :  2000.00 Watts          Slot 1      :   812.19 Watts (  4%)
  Power Supply 8 :  2000.00 Watts          Slot 2      :   784.18 Watts (  4%)
  Power Supply 9 :  2000.00 Watts          Slot 3      :   799.01 Watts (  4%)
   
Safety Level     : 13203.00 Watts (100%) CPM Module    
Alert Level      :     0.00 Watts          Slot A      :   197.12 Watts (  1%)
                                           Slot B      :   195.74 Watts (  1%)
                                         Fabric Module 
                                           Sfm 1       :   201.92 Watts (  1%)
                                           Sfm 2       :   203.30 Watts (  1%)
                                           Sfm 3       :   205.36 Watts (  1%)
                                           Sfm 4       :   201.92 Watts (  1%)
                                           Sfm 5       :   201.24 Watts (  1%)
                                           Sfm 6       :   203.98 Watts (  1%)
                                           Sfm 7       :   202.61 Watts (  1%)
                                           Sfm 8       :   201.92 Watts (  1%)
                                         MDA Module    
                                           MDA 1/1     :   342.86 Watts (  2%)+
                                           MDA 1/2     :   334.06 Watts (  2%)+
                                           MDA 2/1     :   330.77 Watts (  2%)+
                                           MDA 2/2     :   331.87 Watts (  2%)+
                                           MDA 3/1     :   335.16 Watts (  2%)+
                                           MDA 3/2     :   343.96 Watts (  2%)+
                                           MDA 5/1     :   331.87 Watts (  2%)+
                                           MDA 5/2     :   326.37 Watts (  1%)+
                                           MDA 6/1     :   336.26 Watts (  2%)+
                                           MDA 6/2     :   332.97 Watts (  2%)+
                                           MDA 7/1     :   339.56 Watts (  2%)+
                                           MDA 7/2     :   332.97 Watts (  2%)+
                                           MDA 8/1     :   339.56 Watts (  2%)+
                                           MDA 8/2     :   328.57 Watts (  1%)+
                                           MDA 9/1     :   336.26 Watts (  2%)+
                                           MDA 9/2     :   331.87 Watts (  2%)+
                                           MDA 10/1    :   336.26 Watts (  2%)+
                                           MDA 10/2    :   332.97 Watts (  2%)+
                                         CCM Module    
                                           CCM 1       :    24.73 Watts (  0%)
                                           CCM 2       :    26.10 Watts (  0%)
                                         Peak Util.    :  9924.02 Watts ( 45%)
                                                   CURRENT DEMAND
                                         Current Util. :  9613.68 Watts ( 44%)
===============================================================================
+  Power utilization of device already included in IO Module value
===============================================================================
Table 50:  Output Fields: show chassis power-management utilization  

Label

Description

SUPPLY

Power Capacity

Indicates the total amount of power available to the chassis.

Safety Level

Specifies the configured Power Safety Level, which is a percentage of the worst case power consumption level.

Alert Level

Specifies the configured power level in watts, which causes the system to raise an alarm if the available power level drops below a set level.

DEMAND

Fan

Specifies the amount of power utilized for the fan tray indicated.

IO Module

Specifies the amount of power utilized for the IO Module indicated.

CPM Module

Specifies the amount of power utilized for the CPM indicated.

Fabric Module

Specifies the amount of power utilized for the SFM indicated.

MDA Module

Specifies the amount of power utilized for the line card indicated.

Current Util.

Specifies the total amount of power utilized for all system elements.

Peak Util.

Specifies peak utilization starting from boot up.

card

Syntax 
card slot-number cpu [sample-period seconds]
card slot-number fp fp-number dist-cpu-protection
card slot-number fp fp-number policy-accounting
card slot-number memory-pools
card state
card [slot-number]
card [slot-number] detail
card slot-number fp fp-number fwd-engine drop-reason statistics
card slot-number fp fp-number ingress queue-group mode {access | network}
card slot-number [detail] fp fp-number ingress queue-group queue-group-name instance [instance-number] mode {access | network} [statistics]
Context 
show
Description 

This command shows card information.

If no command line parameters are specified, a card summary for all cards is displayed.

Parameters 
slot-number—
Displays information for the specified card slot.
Values—
Depending on the chassis model, IOM/XCM slots are numbered from 1 to 10. SF/CPM slots are A, B. The 7950 XRS has additional slots C, D (upper or lowercase). SFM slots are not addressed as cards. See the show sfm command.

 

cpu—
Displays CPU utilization.
seconds—
Displays the number of seconds over which to sample CPU task utilization.
Values—
1 to 300

 

fp-number—
Displays information for the specified forwarding plane.
Values—
1 to 6

 

dist-cpu-protection—
Displays the distributed CPU protection information.
policy-accounting—
Displays the policy accounting information.
memory-pools—
Displays the memory pools for the card.
state—
Displays provisioned and equipped card and MDA information.
detail—
Displays detailed card information.
fwd-engine—
Displays forwarding engine information.
drop-reason—
Displays drop reason information.
statistics—
Displays statistics information.
ingress—
Specifies statistics are for an ingress queue group.
queue-group—
Displays queue group information.
mode—
Specifies the mode in which the card will operate.
access—
Displays information for the queue groups related to access mode.
network—
Displays information for the queue groups related to network mode.
Output 
Sample Output: show card (showing the 7750 SR-12)
*A:ALU-99# show card
===============================================================================
Card Summary
===============================================================================
Slot      Provisioned Type                         Admin Operational   Comments
              Equipped Type (if different)         State State
-------------------------------------------------------------------------------
1         iom3-xp                                  up    up
4         imm12-10gb-sf+                           up    up
5         imm12-10gb-sf+                           up    up
A         sfm4-12                                  up    up/active
B         sfm4-12                                  up    up/standby
Sample Output: show card (showing the 7950 XRS)
A:Dut-A#   show card 
===============================================================================
Card Summary
===============================================================================
Slot   Provisioned Type                            Admin Operational   Comments
           Equipped Type (if different)            State State         
-------------------------------------------------------------------------------
1      xcm-x20                                     up    up            
2      xcm-x20                                     up    up            
A      cpm-x20                                     up    up/active     
B      cpm-x20                                     up    up/standby    
C      cpm-x20                                     up    down/ext-stby 
D      cpm-x20                                     up    up/ext-actv   
===============================================================================
Output Fields: show card

Table 51 describes the output fields for the show card command.

Table 51:  Output Field: show card  

Label

Description  

Slot

The slot number of the card in the chassis.

Provisioned Type

The card type that is configured for the slot.

Note: CPMs C and D do not appear in the summary unless the Chassis Topology is Extended (for the 7950 XRS-40).

Equipped Type

The card type that is actually populated in the slot.

Note: CPMs C and D do not appear in the summary unless the Chassis Topology is Extended (for the7950 XRS-40).

Admin State

Up — The card is administratively up.

Down — The card is administratively down.

Operational State

Up — The card is operationally up.

Down — The card is operationally down.

active — The CPM is the Active CPM for the system (actively managing the system components, processing various protocols, etc).

standby — The CPM is the Standby CPM. The standby is hot synchronized with the Active CPM.

ext-actv — The CPM is operating in an Extension role in a 7950 XRS-40 system and is the active extension CPM for the chassis in which it sits.

ext-stby — The CPM is operating in an Extension role in a 7950 XRS-40 system and is the standby extension CPM for the chassis in which it sits.

Sample Output: show card state (showing 7750 SR-12 Chassis)
A:ALA-48# show card state
===============================================================================
Card State
===============================================================================
Slot/  Provisioned      Equipped         Admin Operational   Num   Num Comments
MDA    Type             Type             State State         Ports MDA
-------------------------------------------------------------------------------
1      iom3-xp          iom3-xp          up    up                  2
1/1    m60-10/100eth-tx m60-10/100eth-tx up    up            60
1/2    m60-10/100eth-tx m60-10/100eth-tx up    up            60
2      iom3-xp                           up    provisioned         2
3      iom3-xp                           up    provisioned         2
3/1    m12-chds3                         down  provisioned   12
4      iom3-xp                           up    provisioned         2
4/1    m12-chds3                         up    provisioned   12
4/2    m1-choc12-sfp                     up    provisioned   1
5      iom3-xp                           up    provisioned         2
5/2    m12-chds3                         down  provisioned   12
6      iom3-xp                           up    provisioned         2
6/1    m12-chds3                         up    provisioned   12
6/2    m1-choc12-sfp                     up    provisioned   1
7      iom3-xp                           up    provisioned         2
7/1    m12-chds3                         up    provisioned   12
7/2    m1-choc12-sfp                     up    provisioned   1
8      iom3-xp                           up    provisioned         2
8/2    m1-choc12-sfp                     up    provisioned   1
9      iom3-xp                           up    provisioned         2
10     iom3-xp                           up    provisioned         2
A      sfm3-12          sfm-400g         up    up                      Active
B      sfm3-12                           up    provisioned             Standby
===============================================================================
A:ALA-48#
Sample Output: show card state (showing 7750 SR-c12 Chassis)
A:7750-3>config>card# show card state
===============================================================================
Card State
===============================================================================
Slot/  Provisioned      Equipped         Admin Operational   Num   Num Comments
Id     Type             Type             State State         Ports MDA         
-------------------------------------------------------------------------------
1      iom-xp          iom-xp            up    up                  12          
1/1    mcm-xp           mcm-xp           up    up                              
1/3                     mcm-xp           up    unprovisioned                   
1/1    m60-10/100eth-tx m60-10/100eth-tx up    up                  60 
1/5    c8-10/100eth-tx  c8-10/100eth-tx  up    up                  8
1/6                     c1-1gb-sfp       up    unprovisioned                   
1/7                     c8-chds1         up    unprovisioned                   
1/8                     c4-ds3           up    unprovisioned                   
1/9                     c8-10/100eth-tx  up    unprovisioned                   
1/10                    c1-1gb-sfp       up    unprovisioned                   
1/11                    c8-chds1         up    unprovisioned                   
1/12                    c4-ds3           up    unprovisioned                   
A      cfm-xp           cfm-xp           up    up                      Active  
B      cfm-xp                            up    down                    Standby 
===============================================================================
A:7750-3>
Sample Output: show card state (showing 7450 ESS-12 Chassis)
A:ALA-42# show card state
===============================================================================
Card State
===============================================================================
Slot/  Provisioned      Equipped         Admin Operational   Num   Num Comments
MDA    Type             Type             State State         Ports MDA
-------------------------------------------------------------------------------
1      iom3-xp          iom3-xp          up    up                  2
1/1    m60-10/100eth-tx m60-10/100eth-tx up    up            60
1/2    m60-10/100eth-tx m60-10/100eth-tx up    up            60
2      iom3-xp                           up    provisioned         2
2/1    m60-10/100eth-tx                  up    provisioned   60
2/2    m60-10/100eth-tx                  up    provisioned   60
3      iom3-xp                           up    provisioned         2
4      iom3-xp                           up    provisioned         2
5      iom3-xp                           up    provisioned         2
5/1    m20-100eth-sfp                    up    provisioned   20
6      iom3-xp                           up    provisioned         2
7      iom3-xp                           up    provisioned         2
10     iom3-xp                           up    provisioned         2
A      sfm3-7         sfm3-7             up    up                      Active
B      sfm3-12                           up    provisioned             Standby
===============================================================================
A:ALA-42#
Sample Output: show card state (showing a 7950 XRS Chassis)
A:Dut-A# show card state 
===============================================================================
Card State
===============================================================================
Slot/  Provisioned Type                  Admin Operational   Num   Num Comments
Id         Equipped Type (if different)  State State         Ports MDA 
-------------------------------------------------------------------------------
1      xcm-x20                           up    up                  2   
1/1    cx20-10g-sfp                      up    up            20        
1/2    cx20-10g-sfp                      up    up            20        
2      xcm-x20                           up    up                  2   
2/1    cx20-10g-sfp                      up    up            20        
A      cpm-x20                           up    up                      Active
B      cpm-x20                           up    up                      Standby
===============================================================================
Output Fields: show card state

Table 52 describes the output fields for the show card state command.

Table 52:  Output Fields: show card state  

Label

Description  

Slot/MDA

The slot number of the card in the chassis.

Provisioned Type

The card type that is configured for the slot.

Equipped Type

The card type that is actually populated in the slot.

Admin State

Up The card is administratively up.

Down — The card is administratively down.

Operational State

Up — The card is operationally up.

Provisioned — There is no card in the slot but it has been pre-configured.

Num Ports

The number of ports available on the MDA.

Num MDA

The number of MDAs installed.

Comments

Indicates whether the SF/CPM is the active or standby.

Sample Output: show card <slot-number> detail (showing IOM3-XP Card)
A:Dut-A# show card 10 detail 
===============================================================================
Card 10
===============================================================================
Slot      Provisioned      Equipped         Admin   Operational        Comments
          Card-type        Card-type        State   State                      
-------------------------------------------------------------------------------
10        iom3-xp          iom3-xp          up      up                         
 
 
IOM Card Specific Data
    Clock source                  : none
    Named Pool Mode               : Disabled
    Fail On Error                 : Disabled
    Available MDA slots           : 2
    Installed MDAs                : 1
 
FP 1 Specific Data
    WRED Admin State              : Out Of Service
    WRED buffer-allocation max    : 2500
    WRED buffer-allocation min    : 2500
    WRED reserved-cbs max         : 2500
    WRED reserved-cbs min         : 2500
    WRED Slope Policy             : default
    hi-bw-mc-srcEgress Alarm      : 2
    hi-bw-mc-srcEgress Group      : 0
    mc-path-mgmt Admin State      : Out Of Service
    Ingress Bandwidth Policy      : default
    Stable Pool Sizing            : False
    Ingress Buffer Allocation     : 50.00
    Initial Extract Priority Mode : uniform
    HS Pool Policy                : None
    HS Fixed High Threshold Delta : default
    Generation                    : FP3
 
Hardware Data
    Platform type                 : 7750
    Part number                   : 3HE03619AAAK01
    CLEI code                     : IPU3AC9EAA
    Serial number                 : NS1112F0955
    Manufacture date              : 03182011
    Manufacturing string          : 
    Manufacturing deviations      : 
    Manufacturing assembly number : 82-0107-09
    Administrative state          : up
    Operational state             : up
    Temperature                   : 50C
    Temperature threshold         : 75C
    Software boot (rom) version   : X-0.0.I3122 on Mon Oct 17 18:16:02 PDT 2011*
    Software version              : TiMOS-I-8.0.B1-250 iom/hops Nokia 7750 SR*
    Time of last boot             : 2011/11/15 08:44:52
    Current alarm state           : alarm cleared
    Base MAC address              : 8c:90:d3:a4:fb:33
    Last bootup reason            : hard boot
    Memory capacity               : 2,048 MB
   
Sample Output: show card <slot-number> detail (showing XCM-20 Card)
A:Dut-A# show card 1 detail 
===============================================================================
Card 1
===============================================================================
Slot   Provisioned Type                            Admin Operational   Comments
           Equipped Type (if different)            State State         
-------------------------------------------------------------------------------
1      xcm-x20                                     up    up            
 
IOM Card Specific Data
    Clock source                  : none
    Named Pool Mode               : Disabled
    Fail On Error                 : Disabled
    Available MDA slots           : 2
    Installed MDAs                : 2
 
FP 1 Specific Data
    WRED Admin State              : Out Of Service
    WRED buffer-allocation max    : 2500
    WRED buffer-allocation min    : 2500
    WRED reserved-cbs max         : 2500
    WRED reserved-cbs min         : 2500
    WRED Slope Policy             : default
    hi-bw-mc-srcEgress Alarm      : 2
    hi-bw-mc-srcEgress Group      : 0
    mc-path-mgmt Admin State      : Out Of Service
    Ingress Bandwidth Policy      : default
    Stable Pool Sizing            : False
    Ingress Buffer Allocation     : 50.00
    Initial Extract Priority Mode : uniform
    Generation                    : N/A
 
FP 2 Specific Data
    WRED Admin State              : Out Of Service
    WRED buffer-allocation max    : 2500
    WRED buffer-allocation min    : 2500
    WRED reserved-cbs max         : 2500
    WRED reserved-cbs min         : 2500
    WRED Slope Policy             : default
    hi-bw-mc-srcEgress Alarm      : 2
    hi-bw-mc-srcEgress Group      : 0
    mc-path-mgmt Admin State      : Out Of Service
    Ingress Bandwidth Policy      : default
    Stable Pool Sizing            : False
    Ingress Buffer Allocation     : 50.00
    Initial Extract Priority Mode : uniform
    Generation                    : FP3
 
Hardware Data
    Platform type                 : 7950
    Part number                   : 
    CLEI code                     : 
    Serial number                 : xx
    Manufacture date              : 
    Manufacturing string          : (Not Specified)
    Manufacturing deviations      : (Not Specified)
    Manufacturing assembly number : 82-0334-02
    Administrative state          : up
    Operational state             : up
    Temperature                   : 45C
    Temperature threshold         : 75C
    Software boot (rom) version   : X-0.0.I3326 on Thu May 10 18:22:55 PDT
                                    2012 by builder
    Software version              : TiMOS-I-10.0.S209 iom/hops Nokia 7950 XRS
    Time of last boot             : 2012/05/23 20:27:09
    Current alarm state           : alarm cleared
    Base MAC address              : 00:21:05:8a:ca:0b
    Last bootup reason            : hard boot
    Memory capacity               : 4,096 MB
* indicates that the corresponding row element may have been truncated.
===============================================================================
A:Dut-A# 
Output Fields: show card <slot-number> detail (for an IOM or XCM Card)

Table 53 describes the output fields for the show card detail command.

Table 53:  Output Fields: show card <slot-number> detail (for an IOM or XCM Card) 

Label

Description  

Clock source

Source of clock for the IOM. Currently this parameter always displays “none”.

Available MDA slots

The number of MDA slots available on the IOM.

Installed MDAs

The number of MDAs installed on the IOM.

Initial Extract Priority Mode

The scheme used to select the initial drop priority of extracted control plane traffic.

uniform — Initializes the drop priority of all extracted control traffic as high priority.

l3-classify — Initializes the drop priority of all Layer 3 extracted control traffic (for example, BGP or OSPF) based on the QoS classification of the packets.

Refer to Classification-Based Priority for Extracted Protocol Traffic in the 7450 ESS, 7750 SR, 7950 XRS, and VSR System Management Guide for more details.

Part number

The IOM part number.

CLEI code

The Common Language Location Identifier (CLLI) code string for the router.

Serial number

The serial number. Not user-modifiable.

Manufacture date

The chassis manufacture date. Not user-modifiable.

Manufacturing string

Factory-inputted manufacturing text string. Not user-modifiable.

Manufacturing deviations

Displays a record of changes by manufacturing to the hardware or software that is outside the normal revision control process.

Administrative state

Up — The card is administratively up.

Down — The card is administratively down.

Operational state

Up — The card is operationally up.

Down — The card is operationally down.

Temperature

Internal chassis temperature.

Temperature threshold

The value above which the internal temperature must rise in order to indicate that the temperature is critical.

Software boot version

The version of the boot image.

Software version

The software version number.

Time of last boot

The date and time the most recent boot occurred.

Current alarm state

Displays the alarm conditions for the specific board.

Base MAC address

Displays the base MAC address of the hardware component.

Memory capacity

Displays the memory capacity of the card.

Generation

Displays the FP generation of the assembly. N/A is displayed if there is no XMA installed in the card slot.

Sample Output: show card <slot-number> detail (showing SFM and SFM3-12 Cards)
B:Dut-D# show card A detail
===============================================================================
Card A
===============================================================================
Slot      Provisioned         Equipped            Admin      Operational       
          Card-type           Card-type           State      State             
-------------------------------------------------------------------------------
A         sfm-400g            sfm-200g            up         up/standby        
 
 
BOF last modified                 : N/A                                        
Config file version               :                                            
Config file last modified         : N/A                                        
Config file last saved            : N/A                                        
CPM redundancy status             : standby ready                              
 
Flash - cf1:
    Administrative State          : up                                         
    Operational state             : not equipped                               
 
Flash - cf2:
    Administrative State          : up                                         
    Operational state             : not equipped                               
 
Flash - cf3:
    Administrative State          : up                                         
    Operational state             : up                                         
    Serial number                 :     109917C1204W513                        
    Firmware revision             : HDX 2.1                                    
    Model number                  : SanDisk SDCFBI-128                         
    Size                          : 125,038 KB                                 
    Free space                    : 116,238 KB                                 
 
Hardware Data
    Part number                   : 3HE00316AAAA01                             
    CLEI code                     : IPUCACMFAA                                 
    Serial number                 : NS043610538                                
    Manufacture date              : 02252005                                   
    Manufacturing string          :                                            
    Manufacturing deviations      :                                            
    Administrative state          : up                                         
    Operational state             : up                                         
    Temperature                   : 43C                                        
    Temperature threshold         : 75C                                        
    Software boot version         : X-2.0.R12 on Mon Jan 24 12:03:16 PST 2007 *
    Software version              : TiMOS-C-4.0.private cpm/hops Nokia 7750 SR
    Time of last boot             : 2007/04/11 09:39:23                        
    Current alarm state           : alarm cleared                              
    Base MAC address              : 00:03:fa:30:7c:3c                          
    Memory capacity               : 2,016 MB                                   
===============================================================================
B:Dut-D# 
B:NS082761964# show card B detail 
===============================================================================
Card B
===============================================================================
Slot      Provisioned      Equipped         Admin   Operational        Comments
          Card-type        Card-type        State   State                      
-------------------------------------------------------------------------------
B         sfm3-12          sfm3-12          up      up/active                  
BOF last modified                 : N/A
Config file version               : WED AUG 11 19:33:06 2010 UTC
Config file last modified         : N/A
Config file last saved            : N/A
M/S clocking ref state            : primary
 
Flash - cf1:
    Administrative State          : up
    Operational state             : not equipped
 
Flash - cf2:
    Administrative State          : up
    Operational state             : not equipped
 
Flash - cf3:
    Administrative State          : up
    Operational state             : up
    Serial number                 : 365ST295S3453SC01311
    Firmware revision             : V2.23   
    Model number                  : SILICONSYSTEMS INC 256MB                
    Size                          : 253,932 KB
    Free space                    : 121,368 KB
 
Hardware Data
    Platform type                 : 7750
    Part number                   : 3HE03617AAAA01
    CLEI code                     : IPUCAN4FAA
    Serial number                 : NS987456321
    Manufacture date              : 05072010
    Manufacturing string          : 
    Manufacturing deviations      : 
    Manufacturing assembly number : 
    Administrative state          : up
    Operational state             : up
    Temperature                   : 34C
    Temperature threshold         : 75C
    Software boot (rom) version   : X-0.0.I2627 on Thu Jun 10 18:03:16 PDT 2010*
    Software version              : TiMOS-C-0.0.private cpm/hops Nokia 7750 SR
    Time of last boot             : 2010/08/24 13:07:56
    Current alarm state           : alarm cleared
    Base MAC address              : 00:03:fa:1b:d7:16
    Memory capacity               : 4,096 MB
    System timing oscillator type : OCXO
===============================================================================
Sample Output: show card <slot-number> detail (showing CPM-x20 Cards)
*A:bksim3107# show card A detail
===============================================================================
Card A
===============================================================================
Slot Provisioned Type Admin Operational Comments
Equipped Type (if different) State State
-------------------------------------------------------------------------------
A cpm-x20 up up/active
 
BOF last modified : 2013/05/15 12:33:22
Config file version : FRI MAR 08 13:24:58 2013 UTC
Config file last modified : 2013/05/15 12:34:22
Config file last saved : 2013/05/15 12:36:22
M/S clocking ref state : primary
 
Flash - cf1:
Administrative State : up
Operational state : up
Serial number : serial-1
Firmware revision : v1.0
Model number : PC HD 1
Size : 1,950 MB
Free space : 1,950 MB
 
Flash - cf2:
Administrative State : up
Operational state : up
Serial number : serial-2
Firmware revision : v1.0
Model number : PC HD 2
Size : 0 Bytes
Free space : 0 Bytes
 
Flash - cf3:
Administrative State : up
Operational state : up
Serial number : serial-3
Firmware revision : v1.0
Model number : PC HD 3
Size : 18,432 Bytes
Free space : 6,144 Bytes
Hardware Data
Platform type : 7950
Part number : Sim Part#
CLEI code : Sim CLEI
Serial number : card-11
Manufacture date : 01012003
Manufacturing deviations : Sim MfgDeviation card-11
Manufacturing assembly number : 01-2345-67
Administrative state : up
Operational state : up
Temperature : -1C
Temperature threshold : 75C
Software boot (rom) version : simulated
Software version : TiMOS-C-11.0.R2 cpm/i386 Nokia 7950 XRS*
Time of last boot : 2013/05/13 08:10:33
Current alarm state : alarm cleared
Base MAC address : ac:9f:0b:00:00:01
Memory capacity : 3,072 MB
 
Inter Chassis CPM Interconnect
CPM Interconnect Port 1
Oper State : up
SFF Status : operational
 
CPM Interconnect Port 2
...
* indicates that the corresponding row element may have been truncated.
===============================================================================
 
*A:Dut-A# show card D detail
 
===============================================================================
Card D
===============================================================================
Slot   Provisioned Type                            Admin Operational   Comments
           Equipped Type (if different)            State State
-------------------------------------------------------------------------------
D      cpm-x20                                     up    up/ext-stby
 
 
BOF last modified                 : N/A
Config file version               :
Config file last modified         : N/A
Config file last saved            : N/A
M/S clocking ref state            : secondary
 
Flash - cf1:
    Administrative State          : up
    Operational state             : up
    Serial number                 : WE11K6300191
    Firmware revision             : 2.1ME
    Model number                  : WDC SSD-D0128S-7117
    Size                          : 122,089 MB
    Free space                    : 122,089 MB
 
Flash - cf2:
    Administrative State          : up
    Operational state             : not equipped
 
Flash - cf3:
    Administrative State          : up
    Operational state             : up
    Serial number                 :     SPG2012061404165
    Firmware revision             : 20101222
    Model number                  : SMART CF
    Size                          : 3,907 MB
    Free space                    : 3,802 MB
 
Hardware Data
    Platform type                 : 7950
    Part number                   : 3HE07116AARB01
    CLEI code                     : IPUCA9T1AA
    Serial number                 : NS13426D067
    Manufacture date              : 03162014
    Manufacturing deviations      : (Not Specified)
    Manufacturing assembly number : 82-0488-05
    Administrative state          : up
    Operational state             : up
    Temperature                   : 39C
    Temperature threshold         : 75C
    Software boot (rom) version   : X-12.0.B1-120 on Wed Jul 16 18:55:26 PDT
                                    2014 by builder
    Software version              : TiMOS-C-12.0.B1-120 cpm/hops64 Nokia_7950 XRS
                                    7950 Copyright (c) 2000-2016 Nokia
                                    All rights reserved. All use subject to
                                    applicable license agreements.
                                    Built on Wed Jul 16 19:26:12 PDT 2014 by
                                    builder in /rel12.0/b1/B1-120/panos/main
    Time of last boot             : 2014/07/17 13:41:28
    Current alarm state           : alarm cleared
    Base MAC address              : 00:d0:f6:f3:3c:9e
    Memory capacity               : 8,192 MB
 
Hardware Resources (Power-Zone 2)
    Voltage
        Minimum                   :    53.10 Volts  (07/17/2014 12:40:28)
        Current                   :    53.16 Volts
        Peak                      :    54.15 Volts  (07/17/2014 12:18:27)
    Wattage
        Minimum                   :   151.10 Watts  (07/17/2014 13:31:23)
        Current                   :   202.61 Watts
        Peak                      :   208.79 Watts  (07/17/2014 13:00:07)
        Max Required              :   204.00 Watts
    Amperage
        Minimum                   :     3.69 Amps   (07/17/2014 12:18:27)
        Current                   :     3.82 Amps
        Peak                      :     3.94 Amps   (07/17/2014 13:07:25)
 
Inter Chassis CPM Interconnect
    CPM Interconnect Port 1
        Oper State                : up
        SFF Status                : operational
    CPM Interconnect Port 2
        Oper State                : up
        SFF Status                : operational
===============================================================================
Output Fields: show card <slot-number> detail (for a SF/CPM)

Table 54 describes the output fields for the show card detail command for a SF/CPM card.

Table 54:  Output Fields: show card <slot-number> detail (for a SF/CPM) 

Label

Description  

Slot

The slot of the card in the chassis.

Card Provisioned

The SF/CPM type that is configured for the slot. Note: CPMs C and D will not show up in the summary unless the Chassis Topology is Extended (XRS-40).

Card Equipped

The SF/CPM type that is actually populated in the slot. Note: CPMs C and D will not show up in the summary unless the Chassis Topology is Extended (XRS-40).

Admin State

Up — The SF/CPM is administratively up.

Down — The SF/CPM is administratively down.

Operational State

Up — The SF/CPM is operationally up.

Down — The SF/CPM is operationally down.

Inter chassis cpm interconnect

Up — The CPM is operationally up.

Down — The CPM is operationally down.

BOF last modified

The date and time of the most recent BOF modification.

Config file version

The configuration file version.

Config file last modified

The date and time of the most recent config file modification.

Config file last modified

The date and time of the most recent config file modification.

Config file last saved

The date and time of the most recent config file save.

CPM card status

active — The card is acting as the primary (active) CPM in a redundant system.

standby — The card is acting as the standby (secondary) CPM in a redundant system.

Administrative state

Up — The CPM is administratively up.

Down — The CPM is administratively down.

Operational state

Up — The CPM is operationally up.

Down — The CPM is operationally down.

Serial number

The compact flash part number. Not user modifiable.

Firmware revision

The firmware version. Not user modifiable.

Model number

The compact flash model number. Not user modifiable.

Size

The amount of space available on the compact flash card.

Free space

The amount of space remaining on the compact flash card.

Part number

The SF/CPM part number.

CLEI code

The code used to identify the router.

Serial number

The SF/CPM part number. Not user modifiable.

Manufacture date

The chassis manufacture date. Not user modifiable.

Manufacturing string

Factory-set manufacturing text string. Not user modifiable.

Administrative state

Up — The card is administratively up.

Down — The card is administratively down.

Operational state

Up — The card is operationally up.

Down — The card is operationally down.

Time of last boot

The date and time the most recent boot occurred.

Current alarm state

Displays the alarm conditions for the specific board.

Status

Displays the current status.

Temperature

Internal chassis temperature.

Temperature threshold

The value above which the internal temperature must rise in order to indicate that the temperature is critical.

Software boot version

The version of the boot image.

Memory capacity

The total amount of memory.

Sample Output:

show card slot-number detail (showing IOM with license level)

*A:bkvm18# show card 1 detail
===============================================================================
Card 1
===============================================================================
Slot      Provisioned Type                         Admin Operational   Comments
              Equipped Type (if different)         State State
-------------------------------------------------------------------------------
1         iom5-e:he1200g+                          up    up
IOM Card Licensing Data
    Licensed Level                : he1200g+
    Description                   : 1.2T /w Agg to 2.4T, High Edge Routing
    Licensed Bandwidth Used       : 900 Gbps
IOM Card Specific Data
    Clock source                  : none
    Named Pool Mode               : Disabled
    Fail On Error                 : Disabled
    Reset On Recoverable Error    : Disabled
    Available MDA slots           : 2
    Installed MDAs                : 0
FP 1 Specific Data
    WRED Admin State              : Out Of Service
    WRED buffer-allocation max    : 2500
    WRED buffer-allocation min    : 2500
    WRED reserved-cbs max         : 2500
    WRED reserved-cbs min         : 2500
    WRED Slope Policy             : default
    hi-bw-mc-srcEgress Alarm      : disabled
    hi-bw-mc-srcEgress Group      : 0
    mc-path-mgmt Admin State      : Out Of Service
    Ingress Bandwidth Policy      : default
    Stable Pool Sizing            : False
    Ingress Buffer Allocation     : 50.00
    Initial Extract Priority Mode : uniform
    HS Pool Policy                : None
    HS Fixed High Threshold Delta : default
    Generation                    : FP4
Hardware Data
    Platform type                 : N/A
    Part number                   :
    CLEI code                     :
    Serial number                 :
    Manufacture date              :
    Manufacturing deviations      : (Not Specified)
    Manufacturing assembly number :
    Administrative state          : up
    Operational state             : provisioned
    Software boot (rom) version   : (Not Specified)
    Software version              : (Not Specified)
    Time of last boot             : N/A
    Current alarm state           : alarm cleared
    Base MAC address              :
    Last bootup reason            :
    Memory capacity               : 0 MB
Output Fields:

show card slot-number detail (showing IOM with license level)

Table 55 describes the output fields for the show card detail command with IOM licensing information.

Table 55:  Output Fields: show card slot-number detail (showing IOM with license level) 

Label

Description  

Slot

The slot of the card in the chassis.

Provisioned Type

The IOM type and level that is configured for the slot.

Equipped Type (if different)

The IOM type and level that is actually populated in the slot if it is different than the Provisioned Type.

Admin State

Up — The IOM is administratively up.

Down — The IOM is administratively down.

Operational State

Up — The IOM is operationally up.

Down — The IOM is operationally down.

Licensed Level

License level of the card.

Description

Description of the license.

Licensed Bandwidth Used

The total connector bandwidth configured on the assembly.

Sample Output

show card slot-number fp 1 fwd-engine drop-reason statistics

*A:cses-V93# show card 1 fp 1 fwd-engine drop-reason statistics
===============================================================================
Card 1 FP 1 Egress Forwarding Engine Drop Reason Statistics
===============================================================================
Egress Encapsulation Exceeded                          0
MTU Exceeded                                           0
===============================================================================
Output Fields:

show card slot-number fp 1 fwd-engine drop-reason statistics

Table 56 describes the output fields for the show card fp 1 fwd-engine drop-reason command.

Table 56:  Output Fields: show card slot-number fp 1 fwd-engine drop-reason 

Label

Description  

Card

The card in the chassis.

FP

The egress forwarding plane hardware component.

Egress Encapsulation Exceeded

Packet size exceeded the egress encapsulation size.

MTU Exceeded

Packet size exceeded the egress MTU.

cflowd

Syntax 
cflowd
Context 
show
Description 

This command displays cflowd information.

elmi

Syntax 
elmi
Context 
show
Description 

This command displays Ethernet Link Management Interface (eLMI) information.

Table 57 describes the output fields for the show elmi command.

Table 57:  Output Fields: show elmi  

Field

Description

Link Status

Status of the E-LMI protocol when the elmi mode is set to uni-n. Link Status will indicate up if eLMI mode is set to "none".

T391

Pooling timer used by UNI-C. UNI-N will send the consecutive single EVC asynchronous status messages every (T391/10) rounded to the second interval.

T392

Pooling verification timer for UNI-N

N393

Status counter for UNI-N.

Rx Enq. Time

Last time a status inquiry message was received from UNI-C.

Rx Enq Msg

Number of status inquiry messages received.

Rx Check Time

Last time a status inquiry E-LMI check message was received.

Rx Inv. SeqNum

Counts the number of E-LMI messages received with invalid sequence number.

Enq Timeouts

Counts the number of T392 timer expired.

Tx Status Time

Last time a status message was sent by UNI-N.

Tx Status Msg

Number of status messages sent by UNI-N.

Tx Check Time

Last time a status eLMI check message was sent by UNI-N.

Tx Async Status Msg

Counter for single EVC asynchronous status messages sent by UNI-N.

Discard Msg

Counter for the status inquiry messages discarded due to errors.

evc

Syntax 
evc [port-id [vlan vlan-id]]
Context 
show>elmi
Description 

This command displays Ethernet Virtual Connections (EVC). No argument displays all the EVC on the service router. The port and VLAN arguments display information related to EVC associated with the port and VLAN.

Parameters 
port-id —
Displays information related to the EVCs configured on the port.
Values—
slot/mda/port

 

vlan-id
Specifies the VLAN Identifier of the EVC.
Values—
0 to 4094, *

 

Output 

The following output is an example of ELMI EVC information, and Table 58 describes the output fields.

Sample Output
*A:Dut-C# show elmi evc 
===============================================================================
ELMI EVC Table
===============================================================================
Port     Vlan  Status    Type  Evc Id                                          
-------------------------------------------------------------------------------
1/1/1    10    New-Act   P2p   EVC11110                                        
1/1/3    30    New-Act   P2p   EVC11220                                        
1/1/5    100   Act       P2p   EVC115100                                       
1/1/5    200   Act       P2p   EVC115200                                       
-------------------------------------------------------------------------------
Number of Evcs : 4
===============================================================================
*A:Dut-C#
 
 
A:Dut-C# show elmi evc 1/1/5 
===============================================================================
ELMI EVC Table
===============================================================================
Port     Vlan  Status    Type  Evc Id                                          
-------------------------------------------------------------------------------
1/1/5    100   Act       P2p   EVC115100                                       
1/1/5    200   Act       P2p   EVC115200                                       
-------------------------------------------------------------------------------
Number of Evcs : 2
===============================================================================
A:Dut-C#
 
 
*A:Dut-C# show elmi evc 1/1/5 vlan 100 
===============================================================================
Evc Detailed Information
===============================================================================
Port          : 1/1/5                   vlanId        : 100
Evc Status    : Act                     Evc Type      : P2p
Evc Identifier: EVC115100
===============================================================================
*A:Dut-C#
Table 58:  Output Fields: show elmi evc  

Field

Description

Port

Port identifier.

Vlan

Vlan identifier.

Status

New-Act — New and active.

Act — Active.

Type

Connection type.

EVC Id

EVC identifier.

uni

Syntax 
uni [port-id]
Context 
show>elmi
Description 

This command displays information about ELMI mode, status, number of EVCs (SAPs) configured on the port for all of the ports on the service router.

Parameters 
port-id—
Displays UNI information for the specified port.
Values—
slot/mda/port

 

Output 

The following output is an example of elmi uni information.

Sample Output: show elmi uni
*A:Dut-C# show elmi uni  
===============================================================================
ELMI UNI-N Table
===============================================================================
Port     Mode  Status   #Evcs Uni Identifier                                   
-------------------------------------------------------------------------------
1/1/1    None  Up       0     10/100 Ethernet TX                               
1/1/2    None  Up       0     port-21                                          
1/1/3    None  Up       0     10/100 Ethernet TX                               
1/1/4    None  Up       0     10/100 Ethernet TX                               
1/1/5    Uni-N Up       2     UNI115                                           
1/1/6    None  Up       0     10/100 Ethernet TX                               
1/1/7    None  Up       0     10/100 Ethernet TX                               
1/1/8    None  Up       0     10/100 Ethernet TX                               
1/1/9    None  Up       0     10/100 Ethernet TX                               
1/1/10   None  Up       0     10/100 Ethernet TX                               
1/1/11   None  Up       0     10/100 Ethernet TX                               
1/1/12   None  Up       0     10/100 Ethernet TX                               
1/1/13   None  Up       0     10/100 Ethernet TX                               
1/1/14   None  Up       0     10/100 Ethernet TX                               
1/1/15   None  Up       0     10/100 Ethernet TX                               
1/1/16   None  Up       0     10/100 Ethernet TX                               
1/1/17   None  Up       0     10/100 Ethernet TX       
... 
===============================================================================
*A:Dut-C#
 
 
*A:Dut-C# show elmi uni 1/1/5 
===============================================================================
Uni-N Detailed Information
===============================================================================
Uni Mode      : Uni-N                  Link Status         : Up
Uni Identifier: UNI115
T391          : 10 seconds             T392                : 15 seconds
N393          : 4                      UniType             : Bundling
Rx Enq. Time  : 02/18/2010 17:11:44    Tx Status Time      : 02/18/2010 17:11:44
Rx Enq Msg    : 24                     Tx Status Msg       : 24
Rx Check Time : 02/18/2010 17:12:34   Tx Check Time       : 02/18/2010 17:12:34
Rx Inv. SeqNum: 0                     Tx Async Status Msg : 0
Enq Timeouts  : 0                     Discard Msg         : 0
===============================================================================
*A:Dut-C# 

eth-tunnel

Syntax 
eth-tunnel {aps | status}
eth-tunnel tunnel-index [path path-index] [detail]
Context 
show
Description 

This command displays Ethernet tunnel information.

Parameters 
aps—
Shows APS Ethernet tunnel information.
status—
Shows Ethernet tunnel status information.
tunnel-index—
Specifies the tunnel index.
Values—
1 to 1024

 

path-index—
Specifies the path index.
Values—
1 to 16

 

detail—
Displays detailed information.
Output 

The following output is an example of Ethernet tunnel information, and Table 59 describes the output fields.

Sample Output: show eth-tunnel
*A:PE-E# show eth-tunnel
===============================================================================
Ethernet Tunnel Groups
===============================================================================
Tunnel Admin  Oper   Protection    Active Paths
ID     State  State  Type            1  2  3  4  5  6  7  8
-------------------------------------------------------------------------------
1      Up     Up     g.8031-1to1     x  2
2      Up     Up     g.8031-1to1     1  x
===============================================================================
*A:PE-E#
*A:PE-E# show eth-tunnel aps
===============================================================================
Ethernet Tunnel APS Groups
===============================================================================
Tunnel Admin  Oper   Working Path           Path   Active Rx PDU
ID     State  State  Protecting Path        State  Path   Tx PDU
-------------------------------------------------------------------------------
1      Up     Up     1 - 1/1/2 1            Down   No     BF010100 (  SF)
                     2 - 2/1/2 1            Up     Yes    BF010100 (  SF)
2      Up     Up     1 - 2/1/2 2            Up     Yes    0F000000 (  NR)
                     2 - 1/1/2 2            Down   No     EF000000 (SF-P)
===============================================================================
*A:PE-E#
 
*A:PE-E# show eth-tunnel 1
===============================================================================
Ethernet Tunnel Group 1 Information
===============================================================================
Description        : Eth Tunnel
IfIndex            : 1476395009
Admin State        : Up                 Oper State       : Up
Protection Type    : G.8031-1to1        Max Revert Time  :    1 seconds
MAC Address        : 00:1a:f0:44:d2:03  Time to Revert   : N/A
                                        Hold Down Time   :    0 centiseconds
-------------------------------------------------------------------------------
Ethernet Tunnel Group APS Information
-------------------------------------------------------------------------------
APS PDU Rx         : BF010100 (  SF)    Switchover Time  : 05/28/2009 10:10:17
APS PDU Tx         : BF010100 (  SF)
Defect Status      :
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Ethernet Tunnel Group Path Summary
-------------------------------------------------------------------------------
Path ID   Member   Control-Tag Precedence      Admin/Oper      Active  Mgmt
-------------------------------------------------------------------------------
   1      1/1/2    1           primary            Up/Down      No      Yes
   2      2/1/2    1           secondary          Up/Up        Yes     No
===============================================================================
*A:PE-E# 
 
*A:PE-E# show eth-tunnel 1 path 1
===============================================================================
Ethernet Tunnel Group 1 Path Information
===============================================================================
Description        : (Not Specified)
Member             : 1/1/2              Control-Tag      : 1
Admin State        : Up                 Oper State       : Down
-------------------------------------------------------------------------------
Ethernet Tunnel Group Path APS Information
-------------------------------------------------------------------------------
Active Count       : 2                  Active Time      : 0d 00:12:09
-------------------------------------------------------------------------------
Eth-Cfm Configuration Information
-------------------------------------------------------------------------------
Md-index           : 1                  Direction        : Down
Ma-index           : 1                  Admin            : Enabled
MepId              : 1                  CCM-Enable       : Enabled
LowestDefectPri    : macRemErrXcon      HighestDefect    : defRemoteCCM
Defect Flags       : bDefRemoteCCM
Mac Address        : 00:16:4d:c0:c1:ca  ControlMep       : True
===============================================================================
*A:PE-E# 
 
*A:PE-E# show eth-tunnel 1 path 1 detail
===============================================================================
Ethernet Tunnel Group 1 Detailed Path Information
===============================================================================
Description        : (Not Specified)
Member             : 1/1/2              Control-Tag      : 1
Admin State        : Up                 Oper State       : Down
-------------------------------------------------------------------------------
Ethernet Tunnel Group Path APS Information
-------------------------------------------------------------------------------
Active Count       : 2                  Active Time      : 0d 00:12:09
-------------------------------------------------------------------------------
Eth-Cfm Configuration Information
-------------------------------------------------------------------------------
Md-index           : 1                  Direction        : Down
Ma-index           : 1                  Admin            : Enabled
MepId              : 1                  CCM-Enable       : Enabled
LowestDefectPri    : macRemErrXcon      HighestDefect    : defRemoteCCM
Defect Flags       : bDefRemoteCCM
Mac Address        : 00:16:4d:c0:c1:ca  ControlMep       : True
CcmLtmPriority     : 7
CcmTx              : 0                  CcmSequenceErr   : 0
Eth-Ais:           : Disabled
Eth-Tst:           : Disabled
LbRxReply          : 0                  LbRxBadOrder     : 0
LbRxBadMsdu        : 0                  LbTxReply        : 0
LbNextSequence     : 1                  LtNextSequence   : 1
LtRxUnexplained    : 0
===============================================================================
*A:PE-E#
Table 59:  Output Fields: show eth-tunnel  

Field

Description

Tunnel Id

Numeric value from 1 to 64.

Admin State

Up — The eth tunnel is administratively up.

Down — The eth tunnel is administratively down.

Oper State

Up — The eth tunnel is operationally up.

Down — The eth tunnel is operationally down.

Protection Type

Two options:

g8031-1to1 — Two members are allowed, but only one of them is active at one point in time.

loadsharing — Multiple members can be active at one point in time.

Active Paths

Only two paths are supported.

fwd-path-ext

Syntax 
fwd-path-ext [fpe fpe-id]
fwd-path-ext fpe fpe-id associations
Context 
show
Description 

This command displays FPE information.

Parameters 
fpe-id
Specifies the FPE ID.
Values—
1 to 64

 

associations—
Displays a list of current fwd path extensions to which the FPE is associated.
Output 

The following output is an example of show fwd-path-ext command information, and Table 61 describes the output fields.

Sample Output
A:CPM148>config>fwd-path-ext>fpe$ show fwd-path-ext fpe
===============================================================================
FPE Info
===============================================================================
FPE Id    Path Application  Description
          pxc/xc-a, xc-b
-------------------------------------------------------------------------------
1         pxc 1           pw-port      xyz
2         lag 1, lag 2    vxlan-term   abc
-------------------------------------------------------------------------------
Number of entries : 2
-------------------------------------------------------------------------------
SDP-Id Range: 1-100
===============================================================================
*A:CPM148>config>fwd-path-ext>fpe$ show fwd-path-ext fpe 1
============================================================
FPE Id: 2
============================================================
Description        : xyz
Path               : pxc 1
Pw Port            : Enabled       Oper: up
Vxlan Termination  : Disabled      
============================================================
 
 
*A:CPM148>config>fwd-path-ext>fpe$ show fwd-path-ext fpe 2
============================================================
FPE Id: 2
============================================================
Description        : abc
Path               : lag 1, lag 2
Pw Port            : Disabled       
Vxlan Termination  : Disabled      Oper: down ß Can be down due to lag 1/
2 being down, PXCs within the lags being down etc
============================================================

*A:CPM148>config>fwd-path-ext>fpe$ show fwd-path-ext fpe 1 associations
============================================================
pw-port associations
============================================================
Epipe Svc Id    PW-Port-Id 
============================================================
110
220
330
============================================================
Vxlan-termination associations
============================================================
None
============================================================
*A:CPM148>config>fwd-path-ext>fpe$ show fwd-path-ext fpe 2 associations
============================================================
pw-port associations
============================================================
None
============================================================
Vxlan-termination associations
============================================================
tunnel-termination 
============================================================
10.1.1.1
10.2.1.1
2001:db8::10
2001:db8::20
============================================================
Table 60:  Output Fields: show fwd-path-ext  

Field

Description

FPE Id

Displays the configured ID of the FPE.

Path pxc/ xc-a, xc-b

Displays the path associated with this FPE. This can be a single PXC (pair of PXC sub-ports .a and .b), or it can be a LAG with PXC sub-ports as member ports. PXC based LAG is used for redundancy and increased throughput of the FPE. In case of a PXC based LAG, the path is referred to as xc-a and xc-b.

Application

Displays the application associated with this FPE. Based on the application type, the system will internally configure logic on underlying PXC (or PXC based LAG) necessary to accommodate the application.

Description

Displays the user-configurable string used to describe the use of the FPE.

SDP-id Range

Displays the configurable SDP-id range used for internal SDPs that are utilized by FPEs.

Path

Path associated with this FPE. This can be a single PXC (pair of PXC sub-ports .a and .b), or it can be a LAG with PXC sub-ports as member ports. PXC based LAG is used for redundancy and increased throughput of the FPE.

PW-Port

Displays the FPE that is used by PW-port application.

VXLAN-Termination

Displays the FPE that is used by Vxlan-Termination application.

Oper

Displays the status of the application.

EPIPE svc Id

Displays the Epipe service ID with which the PW-port is associated.

PW-Port Id

Displays the PW-port ID that is associated with the EPIPE.

Tunnel termination

Displays the IP addresses on which the VXLAN tunnel is terminated.

interface-group-handler

Syntax 
interface-group-handler [index]
Context 
show
Description 

This command displays Interface Group Handler (IGH) information.

If no command line options are specified, a summary listing of all IGHs is displayed.

Parameters 
index —
Specifies the index.
Values—
1 to 100

 

Output 

The following output is an example of Interface Group Handler information, and Table 61 describes the output fields.

Sample Output: show interface-group-handler
A:ALU-27# show interface-group-handler 
===============================================================================
Interface Group Handler Summary Information
===============================================================================
IGH Index Admin     Number of Threshold                                        
          State     Members                                                    
-------------------------------------------------------------------------------
1         Up        4         4                                                
2         Up        2         2                                                
===============================================================================
A:ALU-27#
 
 
A:ALU-27#show interface-group-handler 2 
===============================================================================
Interface Group Handler 2 Information
===============================================================================
Admin Status       : Up                 
Threshold          : 2                  Last Change      : 02/02/2010 18:10:04
-------------------------------------------------------------------------------
Interface Group Handler Protocol Information
-------------------------------------------------------------------------------
Protocol Oper Status  Active Links                          Up Time
-------------------------------------------------------------------------------
ipcp     up           2                                     0d 00:15:04
ipv6cp   none         0                                             N/A
mplscp   waiting      0                                             N/A
osicp    none         0                                             N/A
-------------------------------------------------------------------------------
Port 1/5/2.2 Information
-------------------------------------------------------------------------------
Protocol Oper Status                                       Up Time
-------------------------------------------------------------------------------
ipcp     up                                                0d 00:15:05
ipv6cp   none                                                      N/A
mplscp   running                                                   N/A
osicp    none                                                      N/A
-------------------------------------------------------------------------------
Port 1/5/2.3 Information
-------------------------------------------------------------------------------
Protocol Oper Status                                       Up Time
-------------------------------------------------------------------------------
ipcp     up                                                0d 00:15:05
ipv6cp   none                                                      N/A
mplscp   running                                                   N/A
osicp    none                                                      N/A
===============================================================================
A:ALU-27#
Table 61:  Output Fields: show interface-group-handler  

Field

Description

IGH Index

A value between 1 and 100 that identifies the specific interface group handler.

Admin State

Up — The interface group handler is administratively up.

Down — The interface group handler administratively down.

Number of Members

Identifies the number of ports or channels in the group, up to a maximum of 8.

Threshold

Indicates the minimum number of active links that must be present for the interface group handler to be active.

mcm

Syntax 
mcm [slot [/mcm]] [detail]
Context 
show
Description 

This command displays MCM information.

If no command line options are specified, a summary output of all MCMs is displayed in table format.

Parameters 
slot—
The slot number for which to display MCM information.
Values—
1

 

mcm—
The MCM number in the slot for which to display MCM information.
Values—
7750 SR-c4 to 1, 3
7750 SR-c12 to 1, 3, 5, 7, 9, 11

 

detail—
Displays detailed MDA information.
Output 

The following output is an example of MCM information, and Table 62 describes the output fields.

Sample Output: show mcm
A:7750-3# show mcm
================================================================================
MCM Summary
================================================================================
Slot Mcm  Provisioned          Equipped            Admin      Operational       
           Mcm-type            Mcm-type            State      State             
--------------------------------------------------------------------------------
1    1      mcm-xp             mcm-xp              up         up                
     3                         mcm-xp              up         unprovisioned     
================================================================================
A:7750-3# 
 
A:7750-3# show mcm 1
================================================================================
MCM 1/1
================================================================================
Slot Mcm  Provisioned          Equipped            Admin     Operational        
           Mcm-type            Mcm-type            State     State              
--------------------------------------------------------------------------------
1    1     mcm-xp              mcm-xp              up         up 
================================================================================
MCM 1/3
================================================================================
Slot Mcm  Provisioned          Equipped             Admin     Operational       
           Mcm-type            Mcm-type             State     State             
--------------------------------------------------------------------------------
     3                         mcm-xp               up        unprovisioned
================================================================================
A:7750-3# 
Table 62:  Output Fields: show mcm  

Label

Description

Slot

The chassis slot number.

MCM

The MCM slot number.

Provisioned MCM-type

The MCM type provisioned.

Equipped MCM-type

The MCM type installed.

Admin State

Up — Administratively up.

Down — Administratively down.

Ops State

Up — Operationally up.

Down — Operationally down.

mda

Syntax 
mda slot [/mda] [detail]
Context 
show
Description 

This command displays MDA\XMA information.

If no command line options are specified, a summary output of all MDAs is displayed in table format.

Parameters 
slot—
Specifies the slot number for which to display MDA information.
Values—
1 to 10

 

mda—
Specifies the MDA number in the slot for which to display MDA information.
Values—
slot [/mda]

 

detail—
Displays detailed MDA information.
Output 
Sample Output: show mda (showing 7450 ESS)
A:ALA-42# show mda
==========================================================================
MDA Summary
==========================================================================
Slot Mda  Provisioned          Equipped             Admin    Operational
          Mda-type             Mda-type             State    State
--------------------------------------------------------------------------
1    1    m60-10/100eth-tx     m60-10/100eth-tx     up       up
     2    m60-10/100eth-tx     m60-10/100eth-tx     up       up
==========================================================================
A:ALA-42#
Sample Output: show mda (showing 7950 XRS)
A:Dut-A# show mda 
===============================================================================
MDA Summary
===============================================================================
Slot  Mda   Provisioned Type   Equipped Type           Admin     Operational
                              (if different)           State     State
-------------------------------------------------------------------------------
1     1     cx20-10g-sfp                                up        up
      2     cx20-10g-sfp                                up        up
2     1     cx20-10g-sfp                                up        up
===============================================================================
A:Dut-A# 
Output Fields: show mda

Table 63 describes the output fields for the show mda command.

Table 63:  Output Fields: show mda  

Label

Description  

Slot

The chassis slot number.

MDA

The MDA slot number.

Provisioned MDA-type

The MDA type provisioned.

Equipped MDA-type

The MDA type actually installed.

Admin State

Up — Administratively up.

Down — Administratively down (e.g., shutdown).

Operational State

Up — Operationally up.

Down — Operationally down.

Sample Output: show mda <slot/mda> detail
*A:Dut-A# show mda 5/1 detail 
===============================================================================
MDA 5/1 detail
===============================================================================
Slot  Mda   Provisioned           Equipped              Admin     Operational  
            Mda-type              Mda-type              State     State        
-------------------------------------------------------------------------------
5     1     m20-1gb-xp-sfp        m20-1gb-xp-sfp        up        up           
 
MDA Specific Data
    Maximum port count            : 20
    Number of ports equipped      : 20
    Network ingress queue policy  : default
    Capabilities                  : Ethernet
    Fail On Error                 : disabled
    Egress XPL error threshold    : 1000
    Egress XPL error window       : 60
Hardware Data
    Platform type                 : 7750
    Part number                   : 3HE03612AAAB01
    CLEI code                     : IPPAABFBAA
    Serial number                 : NS093464752
    Manufacture date              : 08232009
    Manufacturing string          : 
    Manufacturing deviations      : 
    Manufacturing assembly number : 
    Administrative state          : up
    Operational state             : up
    Temperature                   : 37C
    Temperature threshold         : 75C
    Software version              : N/A
    Time of last boot             : 2011/11/15 11:32:49
    Current alarm state           : alarm cleared
    Base MAC address              : 00:23:3e:ea:38:4b
-------------------------------------------------------------------------------
QOS Settings
-------------------------------------------------------------------------------
Ing. Named Pool Policy            : None
Egr. Named Pool Policy            : None
===============================================================================
Sample Output: show mda <slot/mda> detail (showing CMA in Slot 1 on a 7750 SR-c12 or 7750 SR-c4 system)
A:7750-3# show mda 1/5 detail
==========================================================================
MDA 1/5 detail
==========================================================================
Slot Mda  Provisioned          Equipped             Admin    Operational       
          Mda-type             Mda-type             State    State             
--------------------------------------------------------------------------
1    5    c8-10/100eth-tx      c8-10/100eth-tx      up       up           
 
MDA Specific Data
    Maximum port count            : 8                                          
    Number of ports equipped      : 8                                          
    Network ingress queue policy  : default                                    
    Capabilities                  : Ethernet                                   
    Fail On Error                 : disabled
    Egress XPL error threshold    : 1000
    Egress XPL error window       : 60
 
 
Hardware Data
    Part number                   : Sim Part#                                  
    CLEI code                     : Sim CLEI                                   
    Serial number                 : mda-5                                      
    Manufacture date              : 01012003                                   
    Manufacturing string          : Sim MfgString mda-5                        
    Manufacturing deviations      : Sim MfgDeviation mda-5                     
    Administrative state          : up                                         
    Operational state             : up                                         
    Temperature                   : 33C                                        
    Temperature threshold         : 75C                                        
    Time of last boot             : 2007/04/11 15:13:48                        
    Current alarm state           : alarm cleared                              
    Base MAC address              : 04:7b:01:05:00:01                          
==========================================================================
Sample Output: show mda <slot/mda> detail (showing Channelized MDA on a 7750 SR-7)
A:SR-7/Dut-C# show mda 5/1 detail 
==========================================================================
MDA 5/1 detail
==========================================================================
Slot Mda  Provisioned          Equipped             Admin    Operational
          Mda-type             Mda-type             State    State
--------------------------------------------------------------------------
5    1    m1-choc12-sfp        m1-choc12-sfp        up       up
 
MDA Specific Data
    Maximum port count            : 1
    Number of ports equipped      : 1
    Transmit timing selected      : CPM Card A
    Sync interface timing status  : Qualified
    Network ingress queue policy  : default
    Capabilities                  : Sonet, TDM, PPP, FR
    Fail On Error                 : disabled
    Egress XPL error threshold    : 1000
    Egress XPL error window       : 60
 
 
    Min channel size              : PDH DS0 Group
    Max channel size              : PDH DS3
    Max number of channels        : 512
    Channels in use               : 0
 
Hardware Data
    Part number                   : 3HE00193AAAA01
    CLEI code                     :
    Serial number                 : NS042510655
    Manufacture date              : 07072004
    Manufacturing string          :
    Manufacturing deviations      :
    Administrative state          : up
    Operational state             : up
    Time of last boot             : 2007/04/11 12:51:48
    Current alarm state           : alarm cleared
    Base MAC address              : 00:03:fa:1a:7c:6f
==========================================================================
A:SR-7/Dut-C# 
Sample Output: show mda <slot/mda> detail (showing 7950 XRS)
A:Dut-A# show mda 1/1 detail 
===============================================================================
MDA 1/1 detail
===============================================================================
Slot  Mda   Provisioned Type  Equipped Type(if different) Admin     Operational
                                                          State     State
-------------------------------------------------------------------------------
1     1     cx20-10g-sfp                                  up        up
 
 
MDA Specific Data
    Maximum port count            : 20
    Number of ports equipped      : 20
    Network ingress queue policy  : default
    Capabilities                  : Ethernet
    Min channel size              : Sonet STS-192
    Max channel size              : Sonet STS-192
    Max number of channels        : 20
    Channels in use               : 0
 
Hardware Data
    Platform type                 : 7950
    Part number                   : 
    CLEI code                     : 
    Serial number                 : GRA03-126
    Manufacture date              : 
    Manufacturing string          : (Not Specified)
    Manufacturing deviations      : (Not Specified)
    Manufacturing assembly number : 82-0299-03
    Administrative state          : up
    Operational state             : up
    Temperature                   : 45C
    Temperature threshold         : 75C
    Software version              : N/A
    Time of last boot             : 2012/05/23 20:30:55
    Current alarm state           : alarm cleared
    Base MAC address              : 8c:90:d3:be:69:8a
    Firmware version              : I-10.0.S209
 
-------------------------------------------------------------------------------
QOS Settings
-------------------------------------------------------------------------------
===============================================================================
A:Dut-A# 
Output Fields: show mda <slot/mda> detail

Table 64 describes the output fields for the show mda <slot/mda> detail command.

Table 64:  Output Fields: show mda <slot/mda> detail  

Label

Description 

Slot

The chassis slot number.

Mda

The MDA slot number.

Provisioned Mda-type

The provisioned MDA type.

Equipped Mda-type

The MDA type that is physically inserted into this slot in this chassis.

Admin State

Up — The MDA is administratively up.

Down — The MDA is administratively down.

Operational State

Up — The MDA is operationally up.

Down — The MDA is operationally down.

Failure Reason

This hardware component has failed.

Maximum port count

The maximum number of ports that can be equipped on the MDA card.

Number of ports equipped

The number of ports that are actually equipped on the MDA.

Transmit timing selected

Indicates the source for the timing used by the MDA.

Sync interface timing status

Indicates whether the MDA has qualified one of the timing signals from the CPMs.

Network Ingress Queue Policy

Specifies the network queue policy applied to the MDA to define the queueing structure for this object.

Capabilities

Specifies the minimum size of the port that can exist on the MDA.

Egress XPL error threshold

The Egress XPL Error Threshold value used by the fail-on-error feature.

Egress XPL error window

The Egress XPL Error Window value used by the fail-on-error feature.

Max channel size

Specifies the maximum size of the channel that can exist on the channelized MDA.

Channels in use

Applicable for SONET and TDM MDAs only. Indicates the total number of leaf SONET paths, TDM channels and bundles on the MDA which are presently provisioned for passing traffic.

Part number

The hardware part number.

CLEI code

The code used to identify the MDA.

Serial number

The MDA part number. Not user modifiable.

Manufacture date

The MDA manufacture date. Not user modifiable.

Manufacturing string

Factory-inputted manufacturing text string. Not user modifiable.

Administrative state

Up — The MDA is administratively up.

Down — The MDA is administratively down.

Operational state

Up — The MDA is operationally up.

Down — The MDA is operationally down.

Time of last boot

The date and time the most recent boot occurred.

Current alarm state

Displays the alarm conditions for the specific MDA.

Base MAC address

The base chassis Ethernet MAC address. Special purpose MAC addresses used by the system software are constructed as offsets from this base address.

qos

Syntax 
qos {ingress | egress} buffer-allocation [detail]
qos {ingress | egress} orphaned-queues
Context 
show>mda
Description 

This command shows MDA QoS information.

Parameters 
ingress—
Displays ingress information.
egress—
Displays egress information.
buffer-allocation—
Shows named pool buffer allocation information.
detail—
Shows detailed information.
orphaned-queues—
Shows configured but not defined queues.

pools

Syntax 
pools mda-id [/port] [access-app [pool-name | service service-id]] | queue-group queue-group-name [instance id]]]
pools mda-id [/port] [network-app [pool-name |queue-group queue-group-name [instance id]]]
pools mda-id [/port] [direction [pool-name |service service-id| queue-group queue-group-name [instance id]]]
Context 
show
Description 

This command displays pool information.

Parameters 
mda-id[/port]
Displays the pool information of the specified MDA and port.
access-app—
Specifies the pool application as either ingress or egress.
Values—
access-ingress, access-egress

 

instance-id—
Specifies the identification of a specific instance of the queue-group.
Values—
1 to 65535

 

pool-name
Displays the pool information of the specified QoS policy up to 32 characters.
Values—
access-ingress, access-egress

 

service-id
Displays pool information for the specified service.
Values—
1 to 2148278381, svc-name: 64 char max

 

queue-group-name
Displays information for the specified queue group up to 32 characters.
network-app—
Specifies the pool application as either ingress or egress.
Values—
network-ingress, network-egress

 

direction—
Specifies the traffic direction.
Values—
ingress, egress

 

Output 

The following outputs are example of pool information, and Table 65 describes the output fields.

Note:

The pool shared in use stat only increases when a queue is asking for a buffer outside it’s reserved size. If all the buffers in a pool are assigned to queues within their reserved size, then only the reserved in use size will increase. In case of resv CBS oversubscription (CBS sum for all queues is bigger than pool resvCbs), it is possible that pool resv in use stat can increase above the actual pool reserved size.

Output Sample: show pools
*A:PE# show pools 5/1
===============================================================================
===============================================================================
Type    Id-FP     App.    Pool Name                   Actual ResvCBS  PoolSize
                                                      Admin ResvCBS
-------------------------------------------------------------------------------
MDA     5/1-1     Acc-Ing default                     0               0
                                                      Sum
MDA     5/1-1     Acc-Ing MC Path Mgmt                18816           37632
                                                      50%
MDA     5/1-1     Acc-Egr default                     0               0
                                                      Sum
MDA     5/1-1     Net-Ing default                     0               0
                                                      Sum
MDA     5/1-1     Net-Egr default                     0               0
                                                      Sum
Port    5/1/1     Acc-Ing default                     0               0
                                                      Sum
Port    5/1/1     Acc-Egr default                     0               0
                                                      Sum
Port    5/1/1     Net-Egr default                     32256           75264
                                                      Sum
Port    5/1/2     Acc-Ing default                     0               0
                                                      Sum
Port    5/1/2     Acc-Egr default                     0               0
                                                      Sum
Port    5/1/2     Net-Egr default                     32256           75264
                                                      Sum
Port    5/1/3     Acc-Ing default                     0               0
                                                      Sum
Port    5/1/3     Acc-Egr default                     0               0
                                                      Sum
Port    5/1/3     Net-Egr default                     32256           75264
                                                      Sum
Port    5/1/4     Acc-Ing default                     0               0
                                                      Sum
Port    5/1/4     Acc-Egr default                     0               0
                                                      Sum
Port    5/1/4     Net-Egr default                     32256           75264
                                                      Sum
Port    5/1/5     Acc-Ing default                     0               0
                                                      Sum
Port    5/1/5     Acc-Egr default                     0               0
                                                      Sum
Port    5/1/5     Net-Egr default                     32256           75264
                                                      Sum
===============================================================================
*A:PE#
Output Sample: show pools network-egress
*A:PE# show pools 5/1/5 network-egress
===============================================================================
Pool Information
===============================================================================
Port                 : 5/1/5
Application          : Net-Egr          Pool Name             : default
CLI Config. Resv CBS : Sum
Resv CBS Step        : 0%               Resv CBS Max          : 0%
Amber Alarm Threshold: 0%               Red Alarm Threshold   : 0%
-------------------------------------------------------------------------------
Utilization                   State       Start-Avg    Max-Avg    Max-Prob
-------------------------------------------------------------------------------
HiPlus-Slope                  Down              85%       100%         80%
High-Slope                    Down              70%        90%         80%
Low-Slope                     Down              50%        75%         80%
Exceed-Slope                  Down              30%        55%         80%
Time Avg Factor      : 7
Pool Total           : 75264 KB
Pool Shared          : 43008 KB         Pool Resv             : 32256 KB
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Current Resv CBS    Provisioned    Rising         Falling        Alarm
%age                all Queues     Alarm Thd      Alarm Thd      Color
-------------------------------------------------------------------------------
Sum                 32232 KB       NA             NA             Green
Pool Total In Use    : 0 KB
Pool Shared In Use   : 0 KB             Pool Resv In Use      : 0 KB
WA Shared In Use     : 0 KB
HiPlus-Slope Drop Pr*: 0                Hi-Slope Drop Prob    : 0
Lo-Slope Drop Prob   : 0                Excd-Slope Drop Prob  : 0
===============================================================================
Queue : 1 Net=be Port=5/1/5
===============================================================================
FC Map           : be
Tap              : not-applicable
Admin PIR        : 10000000             Oper PIR         : Max
Admin CIR        : 0                    Oper CIR         : 0
Admin MBS        : 37632 KB             Oper MBS         : 37632 KB
High-Plus Drop T*: 37632 KB             High Drop Tail   : 37632 KB
Low Drop Tail    : 33792 KB             Exceed Drop Tail : 29952 KB
CBS              : 744 KB               Depth            : 0
Slope            : not-applicable
===============================================================================
Queue : 2 Net=l2 Port=5/1/5
===============================================================================
FC Map           : l2
Tap              : not-applicable
Admin PIR        : 10000000             Oper PIR         : Max
Admin CIR        : 2500000              Oper CIR         : 2500000
Admin MBS        : 37632 KB             Oper MBS         : 37632 KB
High-Plus Drop T*: 37632 KB             High Drop Tail   : 37632 KB
Low Drop Tail    : 33792 KB             Exceed Drop Tail : 29952 KB
CBS              : 2256 KB              Depth            : 0
Slope            : not-applicable
===============================================================================
Queue : 3 Net=af Port=5/1/5
===============================================================================
FC Map           : af
Tap              : not-applicable
Admin PIR        : 10000000             Oper PIR         : Max
Admin CIR        : 2500000              Oper CIR         : 2500000
Admin MBS        : 37632 KB             Oper MBS         : 37632 KB
High-Plus Drop T*: 37632 KB             High Drop Tail   : 37632 KB
Low Drop Tail    : 33792 KB             Exceed Drop Tail : 29952 KB
CBS              : 7488 KB              Depth            : 0
Slope            : not-applicable
===============================================================================
Queue : 4 Net=l1 Port=5/1/5
===============================================================================
FC Map           : l1
Tap              : not-applicable
Admin PIR        : 10000000             Oper PIR         : Max
Admin CIR        : 2500000              Oper CIR         : 2500000
Admin MBS        : 18816 KB             Oper MBS         : 18816 KB
High-Plus Drop T*: 18816 KB             High Drop Tail   : 18816 KB
Low Drop Tail    : 16896 KB             Exceed Drop Tail : 14976 KB
CBS              : 2256 KB              Depth            : 0
Slope            : not-applicable
===============================================================================
Queue : 5 Net=h2 Port=5/1/5
===============================================================================
FC Map           : h2
Tap              : not-applicable
Admin PIR        : 10000000             Oper PIR         : Max
Admin CIR        : 10000000             Oper CIR         : Max
Admin MBS        : 37632 KB             Oper MBS         : 37632 KB
High-Plus Drop T*: 18816 KB             High Drop Tail   : 18816 KB
Low Drop Tail    : 16896 KB             Exceed Drop Tail : 14976 KB
CBS              : 2256 KB              Depth            : 0
Slope            : not-applicable
===============================================================================
Queue : 8 Net=nc Port=5/1/5
===============================================================================
FC Map           : nc
Tap              : not-applicable
Admin PIR        : 10000000             Oper PIR         : Max
Admin CIR        : 1000000              Oper CIR         : 1000000
Admin MBS        : 18816 KB             Oper MBS         : 18816 KB
High-Plus Drop T*: 18816 KB             High Drop Tail   : 18816 KB
Low Drop Tail    : 16896 KB             Exceed Drop Tail : 14976 KB
CBS              : 2256 KB              Depth            : 0
Slope            : not-applicable
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:PE# 
Output Sample: show pool access-ingress
*A:PE# show pools 5/1/1 access-ingress
 
===============================================================================
Pool Information
===============================================================================
Port                 : 5/1/1
Application          : Acc-Ing          Pool Name             : default
CLI Config. Resv CBS : 30%(default)
Resv CBS Step        : 0%               Resv CBS Max          : 0%
Amber Alarm Threshold: 0%               Red Alarm Threshold   : 0%
-------------------------------------------------------------------------------
Utilization                   State       Start-Avg    Max-Avg    Max-Prob
-------------------------------------------------------------------------------
HiPlus-Slope                  Down              85%       100%         80%
High-Slope                    Down              70%        90%         80%
Low-Slope                     Down              50%        75%         80%
Exceed-Slope                  Down              30%        55%         80%
 
Time Avg Factor      : 7
Pool Total           : 264192 KB
Pool Shared          : 184320 KB        Pool Resv             : 79872 KB
 
-------------------------------------------------------------------------------
 
-------------------------------------------------------------------------------
Current Resv CBS    Provisioned    Rising         Falling        Alarm
%age                all Queues     Alarm Thd      Alarm Thd      Color
-------------------------------------------------------------------------------
30%                 0 KB           NA             NA             Green
Pool Total In Use    : 0 KB
Pool Shared In Use   : 0 KB             Pool Resv In Use      : 0 KB
WA Shared In Use     : 0 KB
 
HiPlus-Slope Drop Pr*: 0                Hi-Slope Drop Prob    : 0
Lo-Slope Drop Prob   : 0                Excd-Slope Drop Prob  : 0
 
===============================================================================
Queue : 100->5/1/1->1
===============================================================================
FC Map               : be l2 af l1 h2 ef h1 nc
Tap                  : 5/1              FP               : 1
Admin PIR            : 10000000         Oper PIR         : Max
Admin CIR            : 0                Oper CIR         : 0
Admin MBS            : 12288 KB         Oper MBS         : 12288 KB
High-Plus Drop Tail  : 12288 KB         High Drop Tail   : 12288 KB
Low Drop Tail        : 10944 KB         Exceed Drop Tail : 9792 KB
CBS                  : 0 KB             Depth            : 0
Slope                : not-applicable
===============================================================================
 
===============================================================================
Queue : 100->5/1/1->1
===============================================================================
FC Map               : be l2 af l1 h2 ef h1 nc
Tap                  : 1/*              FP               : 1
Admin PIR            : 10000000         Oper PIR         : Max
Admin CIR            : 0                Oper CIR         : 0
Admin MBS            : 12288 KB         Oper MBS         : 12288 KB
High-Plus Drop Tail  : 12288 KB         High Drop Tail   : 12288 KB
Low Drop Tail        : 10944 KB         Exceed Drop Tail : 9792 KBB
CBS                  : 0 KB             Depth            : 0
Slope                : not-applicable
===============================================================================
 
===============================================================================
Queue : 100->5/1/1->11
===============================================================================
FC Map               : be l2 af l1 h2 ef h1 nc
Tap                  : MCast            FP               : not-applicable
Admin PIR            : 10000000         Oper PIR         : Max
Admin CIR            : 0                Oper CIR         : 0
Admin MBS            : 12288 KB         Oper MBS         : 12288 KB
High-Plus Drop Tail  : 12288 KB         High Drop Tail   : 12288 KB
Low Drop Tail        : 10944 KB         Exceed Drop Tail : 9792 KB
CBS                  : 0 KB             Depth            : 0
Slope                : not-applicable
===============================================================================
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:PE#
Sample Output: show pools access-egress
*A:PE# show pools 5/1/1 access-egress
===============================================================================
Pool Information
===============================================================================
Port                 : 5/1/1
Application          : Acc-Egr          Pool Name             : default
CLI Config. Resv CBS : 30%(default)
Resv CBS Step        : 0%               Resv CBS Max          : 0%
Amber Alarm Threshold: 0%               Red Alarm Threshold   : 0%
-------------------------------------------------------------------------------
Queue-Groups
-------------------------------------------------------------------------------
Queue-Group:Instance : policer-output-queues:1
-------------------------------------------------------------------------------
Utilization                   State       Start-Avg    Max-Avg    Max-Prob
-------------------------------------------------------------------------------
HiPlus-Slope                  Down              85%       100%         80%
High-Slope                    Down              70%        90%         80%
Low-Slope                     Down              50%        75%         80%
Exceed-Slope                  Down              30%        55%         80%
Time Avg Factor      : 7
Pool Total           : 75264 KB
Pool Shared          : 52224 KB         Pool Resv             : 23040 KB
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Current Resv CBS    Provisioned    Rising         Falling        Alarm
%age                all Queues     Alarm Thd      Alarm Thd      Color
-------------------------------------------------------------------------------
30%                 0 KB           NA             NA             Green
Pool Total In Use    : 0 KB
Pool Shared In Use   : 0 KB             Pool Resv In Use      : 0 KB
WA Shared In Use     : 0 KB
HiPlus-Slope Drop Pr*: 0                Hi-Slope Drop Prob    : 0
Lo-Slope Drop Prob   : 0                Excd-Slope Drop Prob  : 0
===============================================================================
Queue : accQGrp->policer-output-queues:1(5/1/1)->1
===============================================================================
FC Map               : not-applicable
Tap                  : not-applicable
Admin PIR            : 10000000         Oper PIR         : Max
Admin CIR            : 0                Oper CIR         : 0
Admin MBS            : 12288 KB         Oper MBS         : 12288 KB
High-Plus Drop Tail  : 12288 KB         High Drop Tail   : 12288 KB
Low Drop Tail        : 10944 KB         Exceed Drop Tail : 9792 KB
CBS                  : 0 KB             Depth            : 0
Slope                : not-applicable
===============================================================================
===============================================================================
Queue : accQGrp->policer-output-queues:1(5/1/1)->2
===============================================================================
FC Map               : not-applicable
Tap                  : not-applicable
Admin PIR            : 10000000         Oper PIR         : Max
Admin CIR            : 0                Oper CIR         : 0
Admin MBS            : 12288 KB         Oper MBS         : 12288 KB
High-Plus Drop Tail  : 12288 KB         High Drop Tail   : 12288 KB
Low Drop Tail        : 10944 KB         Exceed Drop Tail : 9792 KB
CBS                  : 0 KB             Depth            : 0
Slope                : not-applicable
===============================================================================
===============================================================================
Queue : 1->5/1/1->1
===============================================================================
FC Map               : be l2 af l1 h2 ef h1 nc
Tap                  : not-applicable
Admin PIR            : 10000000         Oper PIR         : Max
Admin CIR            : 0                Oper CIR         : 0
Admin MBS            : 12288 KB         Oper MBS         : 12288 KB
High-Plus Drop Tail  : 12288 KB         High Drop Tail   : 12288 KB
Low Drop Tail        : 10944 KB         Exceed Drop Tail : 9792 KB
CBS                  : 0 KB             Depth            : 0
Slope                : not-applicable
===============================================================================
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:PE#
Output Fields: show pools

Table 65 describes the output fields for the show pools command.

Table 65:  Output Fields: show pools  

Label

Description  

Type

Specifies the pool type.

ID-FP

Specifies the card-FP or MDA-FP or card, MDA, or port designation.

Application/Type

Specifies what the pool would be used for. The pools could be used for access or network traffic at either ingress or egress.

Pool Name

Specifies the name of the pool being used.

Resv CBS

Specifies the percentage of pool size reserved for CBS.

Utilization

Specifies the type of the slope policy.

State

The administrative status of the port.

Start-Avg

Specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.

Max-Avg

Specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.

Time Avg Factor

Specifies the time average factor the weighting between the previous shared buffer average utilization result and the new shared buffer utilization in determining the new shared buffer average utilization.

Actual ResvCBS

Specifies the actual percentage of pool size reserved for CBS.

Admin ResvCBS

Specifies the percentage of pool size reserved for CBS.

PoolSize

Specifies the size in percentage of buffer space. The value '-1' implies that the pool size should be computed as per fair weighting between all other pools.

Pool Total

Displays the total pool size.

Pool Shared

Displays the amount of the pool which is shared.

Pool Resv

Specifies the percentage of reserved pool size.

Pool Total In Use

Displays the total amount of the pool which is in use.

Pool Shared In Use

Displays the amount of the pool which is shared that is in use.

2.21.2.2. PEQ Show Commands

The PEQ commands apply to the 7950 XRS only.

pcm

Syntax 
pcm [pcm-slot] [chassis chassis-id] [detail]
Context 
show
Description 

This command displays PCM information.

Parameters 
pcm-slot—
Specifies the PCM slot identifier.
Values—
1 to 12

 

chassis-id—
Specifies the chassis ID for the router chassis.
Values—
1 to 2

 

detail—
Displays detailed information.
Output 

The following output shows PCM information.

Sample Output: show pcm
*A:Dut-A# show pcm
===============================================================================
PCM Summary
===============================================================================
Chassis/   Provisioned Type             Operational    Input      Zone 
Slot           Equipped Type (if diff)  State          A B2 A2 B       
-------------------------------------------------------------------------------
1/9        (not provisioned)            unprovisioned               1  
               (present)
1/10       (not provisioned)            unprovisioned  Y Y   Y Y    1  
               quad-pcm
1/11       quad-pcm                     unprovisioned  Y Y   Y Y    1  
1/12       quad-pcm                     unprovisioned  Y Y   Y Y    1 

peq

Syntax 
peq [peq-slot] [chassis chassis-id] [detail]
Context 
show
Description 

This command displays APEQ information.

Parameters 
peq-slot—
Specifies the APEQ slot identifier.
Values—
1 to 12

 

chassis-id—
Specifies the chassis ID for the router chassis.
Values—
1 to 2

 

detail—
Displays detailed information.
Output 

The following outputs are examples of PEQ information, and Table 66 describes the output fields.

Sample Output: show peq
*A:Dut-A# show peq 
===============================================================================
PEQ Summary
===============================================================================
Chassis/   Provisioned Type             Admin Operational   Input  Zone  Input
Slot           Equipped Type (if diff)  State State         A B          Mode
-------------------------------------------------------------------------------
1/1        apeq-dc-2000                 up    down          Y Y    1     N/A
1/2        (not provisioned)            up    unprovisioned Y Y    1     N/A
               apeq-dc-2000             
1/3        apeq-dc-2000                 up    up            Y Y    1     N/A
1/4        apeq-dc-2000                 up    up            Y Y    1     N/A
1/5        apeq-dc-2000                 up    up            Y Y    1     N/A
1/6        apeq-dc-2000                 up    down          Y Y    1     N/A
1/7        apeq-dc-2000                 up    down          Y Y    1     N/A
1/8        apeq-dc-2000                 up    down          Y Y    1     N/A
1/9        apeq-dc-2000                 up    down          Y Y    1     N/A
1/10       apeq-dc-2000                 up    down          Y Y    1     N/A
1/11       apeq-dc-2000                 up    down          Y Y    1     N/A
1/12       apeq-dc-2000                 up    down          Y Y    1     N/A
2/1        apeq-dc-2000                 up    provisioned   - -    2     N/A
               (not equipped)           
===============================================================================
Sample Output: show peq <peq-slot> detail
*A:Dut-A# show peq 1 detail
===============================================================================
PEQ 1
===============================================================================
Slot   Provisioned Type                 Admin Operational   Input  Zone  Input
           Equipped Type (if diff)      State State         A B          Mode
-------------------------------------------------------------------------------
1      apeq-dc-2000                          down  down     Y N    1     N/A
 
Hardware Data
    Part number                  : 3HE07114AARA01
    CLEI code                    : IPUPAJHUAA
    Serial number                : NS1250G0116
    Manufacture date             : 12202012
    Manufacturing deviations     : (Not Specified)
    Manufacturing assembly number: 8205320107
    Time of last boot            : 2014/01/07 11:01:44
    Current alarm state          : alarm active
===============================================================================
Sample Output: show peq detail

In the following example, the entries for PEQ 2 to PEQ 11 are not shown.

*A:Dut-A# show peq detail 
===============================================================================
PEQ 1
===============================================================================
Slot   Provisioned Type                 Admin Operational   Input  Zone  Input
           Equipped Type (if diff)      State State         A B          Mode
-------------------------------------------------------------------------------
1/1    apeq-dc-2000                     down  down          Y N     1    N/A
 
Hardware Data
    Part number                  : 3HE07114AARA01
    CLEI code                    : IPUPAJHUAA
    Serial number                : NS1250G0116
    Manufacture date             : 12202012
    Manufacturing deviations     : (Not Specified)
    Manufacturing assembly number: 8205320107
    Time of last boot            : 2014/01/07 11:01:44
    Current alarm state          : alarm active
 
===============================================================================
 
...
 
===============================================================================
PEQ 12
===============================================================================
Slot   Provisioned Type                 Admin Operational   Input  Zone  Input
           Equipped Type (if diff)      State State         A B          Mode
-------------------------------------------------------------------------------
12     apeq-dc-2000                     up    up            Y N    1     N/A
 
Hardware Data
    Part number                  : 3HE07114AARA01
    CLEI code                    : IPUPAJHUAA
    Serial number                : NS1250G0115
    Manufacture date             : 12202012
    Manufacturing deviations     : (Not Specified)
    Manufacturing assembly number: 8205320107
    Time of last boot            : 2014/01/07 11:01:44
    Current alarm state          : alarm active
===============================================================================
Output Fields: show peq
Table 66:  Output Fields: show peq  

Label

Description  

Slot

The number of the slot in which the APEQ is installed.

Provisioned Type Equipped Type (if different)

The APEQ type provisioned.

Admin State

The administrative state.

Operational State

The operational state.

Input

Specifies the input battery feed: A, or B.

Zone

Specifies the chassis power zone.

Hardware Data:

Part number

The APEQ part number.

CLEI code

The APEQ CLEI code.

Serial number

The APEQ serial number.

Manufacture date

The date the APEQ was manufactured.

Manufacturing deviations

Specifies any manufacturing deviations.

Manufacturing assembly number

The APEQ assembly number.

Administrative state

Specifies the administrative state of the APEQ.

Operational state

Specifies the operational state of the APEQ.

Time of last boot

Indicates the time stamp of the last system restart.

Current alarm state

Indicates the current alarm state.

megapools

Syntax 
megapools slot-number fp fp-number wred [detail] queue-group queue-group-name [instance instance-id]
megapools slot-number fp fp-number
megapools slot-number fp fp-number wred [detail] [service-id service-id]
Context 
show
Description 

This command displays megapool information. A megapool is a mechanism the forwarding plane uses to allow oversubscription of buffer pools. Every buffer pool is created in the context of a megapool.

By default, all buffer pools are associated with a single megapool and the pools are not oversubscribed. When WRED queue support is enabled on the FP, three megapools are used.

  1. The original megapool services the default and named pools.
  2. The second megapool services the system internal use pools.
  3. The third megapool is used by the buffer pools used by the WRED queues.

The traffic manager buffers are allocated to the three megapools without oversubscription. The WRED queue pools are allowed to oversubscribe their megapool, but the megapool protects the pools associated with the other megapools from buffer starvation that could be caused by that oversubscription.

Parameters 
slot-number—
Displays information for the specified card slot.
Values—
1 to 10

 

fp-number—
Displays information for the specified FP.
Values—
1 to 6

 

wred—
Displays WRED queue pool information.
detail—
Displays detailed information.
queue-group-name
Displays information for the specified port queue group name, up to 32 characters.
instance-id—
Specifies the identification of a specific instance of the queue group.
Values—
1 to 65535

 

service-id—
Specifies the service ID.
Values—
1 to 2148278381

 

service-name—
Specifies a service name up to 64 characters.

sfm

Syntax 
sfm [sfm-name] [detail]
sfm [sfm-name] icport [down] [degraded]
Context 
show
Description 

This command displays SFM status information.

Parameters 
sfm-name—
Specifies the SFM identifier.
Values—
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16

 

icport—
Displays interconnect port information.
down—
Displays interconnect ports that are not operational.
degraded—
Displays interconnect ports that are associated with fabric degradation.
detail—
Displays detailed information about the SFM.
Output 
Sample Output: show sfm
A:7950 XRS-20# show sfm
===============================================================================
SFM Summary
===============================================================================
Slot   Provisioned Type                            Admin Operational   Comments
           Equipped Type (if different)            State State
-------------------------------------------------------------------------------
1      sfm-x20                                     up    up
2      sfm-x20                                     up    up
3      sfm-x20                                     up    up
4      sfm-x20                                     up    up
5      sfm-x20                                     up    up
6      (not provisioned)                           up    unprovisioned
           sfm-x20
7      (not provisioned)                           up    unprovisioned
           sfm-x20
8      (not provisioned)                           up    unprovisioned
           sfm-x20
===============================================================================
Sample Output: show sfm <sfm-id> detail
A:7950 XRS-20# show sfm 2 detail
===============================================================================
Fabric 2
===============================================================================
Slot   Provisioned Type                            Admin Operational   Comments
           Equipped Type (if different)            State State
-------------------------------------------------------------------------------
2      (not provisioned)                           up    unprovisioned
           sfm-x20
 
Hardware Data
    Part number                   : xx
    CLEI code                     : xx
    Serial number                 : xx
    Manufacture date              : xx
    Manufacturing string          : xx
    Manufacturing deviations      : xx
    Manufacturing assembly number : xx
    Administrative state          : up
    Operational state             : unprovisioned
    Time of last boot             : N/A
    Current alarm state           : alarm cleared
===============================================================================
 
Inter Chassis SFM Interconnect
SFM Interconnect Port 1
oper state : no-link
Misconnect Info : Fabric 3 IcPort 14 
SFF Status : not-equipped
fabric degrade state : none
Sample Output: show sfm icport
*A:myNode# show sfm icport
===============================================================================
SFM Interconnect Port Summary
===============================================================================
SFMSFM IcPort IcPort Module Degrade Miscon.Info
Oper State Num Oper State Inserted State SFM IcPort
-------------------------------------------------------------------------------
1 unprovisioned 1 up yes none
1 unprovisioned 2 invalid-conne* no degraded 3 14
2 up 2 indeterminate no none
2 up 3 up no degraded
2 up 5 no-link no none
2 up 14 indeterminate yes degraded
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
 
*A:myNode# show sfm icport down
===============================================================================
SFM Interconnect Port Summary
===============================================================================
SFM SFM IcPortIcPortModuleDegradeMiscon. Info
Oper StateNumOper StateInsertedStateSFMIcPort
-------------------------------------------------------------------------------
1 unprovisioned 2invalid-conne*nodegraded 3 14
2 up 2indeterminatenonone
2 up5no-linknonone
2 up14indeterminateyesdegraded
===============================================================================
* indicates that the corresponding row element may have been truncated.
 
*A:myNode# show sfm icport degraded
===============================================================================
SFM Interconnect Port Summary
===============================================================================
SFM SFMIcPortIcPortModuleDegradeMiscon. Info
Oper StateNumOper StateInserted State SFM IcPort
-------------------------------------------------------------------------------
2 up 3 up no degraded
2 up 14 indeterminate yes degraded
===============================================================================
Output Fields: show sfm

Table 67 describes output fields for the show sfm command.

Table 67:  Output Fields: show sfm  

Label

Description  

Slot

The number of the slot in which the SFM is installed.

Provisioned Type Equipped Type (if different)

The SFM type provisioned.

Admin State

The administrative state.

Operational State

The operational state.

Hardware Data

Part number

The SFM part number.

CLEI code

The SFM CLEI code.

Serial number

The SFM serial number.

Manufacture date

The date the SFM was manufactured.

Manufacturing deviations

Specifies any manufacturing deviations.

Manufacturing assembly number

The SFM assembly number.

Administrative state

Specifies the administrative state of the SFM.

Operational state

Specifies the operational state of the SFM.

Time of last boot

Indicates the time stamp of the last system restart.

Current alarm state

Indicates the current alarm state.

Inter Chassis SFM Interconnect

SFM Interconnect Port

Port number of the interconnect port.

oper state

Up — The SFM is administratively up.

Down — The SFM is administratively down.

Misconnect Info

Only displayed if the oper state is invalid-connection.

SFF Status

The SFF status

fabric degrade state

Indicates state.

2.21.2.3. APS Show Commands

aps

Syntax 
aps [aps-id] [detail]
Context 
show
Description 

This command displays Automated Protection Switching (APS) information.

Parameters 
aps-id—
Displays information for the specified APS group ID.
Values—
aps-group-id aps: keyword group-id: 1 to 128

 

detail—
Displays detailed APS information.
Output 
Sample Output: show aps (Working Multi-chassis APS Node)
*A:Dut-A# show aps aps-1
===============================================================================
APS Group Info
===============================================================================
Interface Admin  Oper   MC-Ctl  Work      Prot      Active    Tx/Rx
          State  State  State   Circuit   Circuit   Circuit   K1 Byte
-------------------------------------------------------------------------------
aps-1     Up     Up     N/A     1/5/1     1/9/5     1/5/1     PC-Tx: No-Req
===============================================================================
*A:Dut-A#
 
 
*A:Dut-A# show aps aps-1 detail
===============================================================================
APS Group: aps-1
===============================================================================
Description        : APS Group
Group Id           : 1                      Active Circuit       : 1/5/1
Admin Status       : Up                     Oper Status          : Up
Working Circuit    : 1/5/1                  Protection Circuit   : 1/9/5
Switching-mode     : Uni-1plus1             Switching-arch       : 1+1(sig,data)
Revertive-mode     : Non-revertive          Revert-time (min)    :
Rx K1/K2 byte      : 0x00/0x00 (No-Req on Protect)
Tx K1/K2 byte      : 0x00/0x00 (No-Req on Protect)
Current APS Status : OK
Multi-Chassis APS  : No
Neighbor           : 0.0.0.0
Control link state : N/A
Advertise Interval : 1000 msec              Hold Time            : 3000 msec
APS SF Hold Time   : 6000 msec              APS SD Hold Time     : 9000 msec
Mode mismatch Cnt  : 0                      Channel mismatch Cnt : 0
PSB failure Cnt    : 0                      FEPL failure Cnt     : 0
-------------------------------------------------------------------------------
 APS Working Circuit - 1/5/1
-------------------------------------------------------------------------------
Admin Status       : Up                     Oper Status          : Up
Current APS Status : OK                     No. of Switchovers   : 0
Last Switchover    : None                   Switchover seconds   : 0
Signal Degrade Cnt : 1                      Signal Failure Cnt   : 1
Last Switch Cmd    : No Cmd                 Last Exercise Result : Unknown
Tx L-AIS           : None
-------------------------------------------------------------------------------
 APS Protection Circuit - 1/9/5
-------------------------------------------------------------------------------
Admin Status       : Up                     Oper Status          : Up
Current APS Status : OK                     No. of Switchovers   : 0
Last Switchover    : None                   Switchover seconds   : 0
Signal Degrade Cnt : 1                      Signal Failure Cnt   : 1
Last Switch Cmd    : No Cmd                 Last Exercise Result : Unknown
Tx L-AIS           : None
===============================================================================
*A:Dut-A#
 
Sample Output: show aps (Protect MC-APS Node)
B:Dut-E# show aps 
==================================================================================
APS Group Info
==================================================================================
Interface Admin  Oper    MC-Ctl   Work      Prot       Active     Tx/Rx            
                 State   State    State     Circuit    Circuit    Circuit K1 Byte   
       
----------------------------------------------------------------------------------
aps-20    Up     Up      N/A      3/1/1     3/1/2      3/1/1      PC-Tx:  No-Req    
==================================================================================
B:Dut-E# 
 
 
B:Dut-E# show aps aps-30 detail
===============================================================================
APS Group: aps-30
===============================================================================
Description        : APS Group
Group Id           : 30                     Active Circuit       : N/A        
Admin Status       : Up                     Oper Status          : Up         
Working Circuit    : N/A                    Protection Circuit   : 2/2/2      
Switching-mode     : Bi-directional         Switching-arch       : 1+1        
Revertive-mode     : Non-revertive          Revert-time (min) :            
Rx K1/K2 byte      : 0x00/0x05 (No-Req on Protect)                            
Tx K1/K2 byte      : 0x00/0x05 (No-Req on Protect)                            
Current APS Status : OK                                                       
Multi-Chassis APS  : Yes                                                      
Neighbor           : 10.1.1.1                                                 
Control link state : Up                                                       
Advertise Interval : 1000 msec              Hold time            : 3000 msec  
Mode mismatch Cnt  : 0                      Channel mismatch Cnt : 0          
PSB failure Cnt    : 0                      FEPL failure Cnt     : 1          
-------------------------------------------------------------------------------
 APS Working Circuit - Neighbor
-------------------------------------------------------------------------------
Admin Status       : N/A                    Oper Status          : N/A        
Current APS Status : OK                     No. of Switchovers   : 0          
Last Switchover    : None                   Switchover seconds   : 0          
Signal Degrade Cnt : 0                      Signal Failure Cnt   : 0          
Last Switch Cmd    : No Cmd                 Last Exercise Result : Unknown    
Tx L-AIS           : None                                                     
-------------------------------------------------------------------------------
 APS Protection Circuit - 2/2/2
-------------------------------------------------------------------------------
Admin Status       : Up                     Oper Status          : Up         
Current APS Status : OK                     No. of Switchovers   : 0          
Last Switchover    : None                   Switchover seconds   : 0          
Signal Degrade Cnt : 0                      Signal Failure Cnt   : 0          
Last Switch Cmd    : No Cmd                 Last Exercise Result : Unknown    
Tx L-AIS           : None                                                     
===============================================================================
B:Dut-E# 
Output Fields: show aps

Table 68 describes output fields for the show aps command.

Table 68:  Output Fields: show aps  

Label

Description  

Interface

Specifies the APS interface name (the APS group port).

Admin State

Up — APS is administratively up.

Down — APS port is administratively down.

Oper State

Up — APS port is operationally up.

Down — APS is operationally down.

MC-CTL State

Specifies the multi-chassis state.

Work Circuit

Specifies the working circuit ID.

Prot Circuit

Specifies the physical port that acts as the protection circuit for this APS group.

Active Circuit

Specifies the active circuit.

Tx/Rx K1 Byte

Displays the value of the SONET/SDH K1 byte received or transmitted on the protection circuit.

Group Id

Displays the APS group name.

Protection Circuit

Displays the physical port that will act as the protection circuit for this APS group.

Switching-mode

Displays the switching mode of the APS group.

Switching-arch

The architecture of the APS group.

Revertive-mode

Displays the revertive mode of the APS group.

non-revertive — Traffic remains on the protection line until another switch request is received.

revertive — When the condition that caused a switch to the protection line has been cleared the signal is switched back to the working line.

Revert-time

Displays the configured time, in minutes, to wait after the working circuit has become functional again, before making the working circuit active again. If the revertive mode is non-revertive, then this field will be empty.

Rx K1/K2 byte

Displays the value of the SONET/SDH K1/K2 byte received on the interface.

Tx K1/K2 byte

Displays the value of the SONET/SDH K1/K2 byte transmitted on the interface.

Current APS Status

Displays the current APS status.

Mode Mismatch Cnt

Indicates the number of times a conflict occurs between the current local mode and the received K2 mode information.

Channel mismatch Cnt

Indicates the number of mismatches between the transmitted K1 channel and the received K2 channel has been detected.

PSB failure Cnt

Displays a count of Protection Switch Byte (PSB) failure conditions. This condition occurs when either an inconsistent APS byte or an invalid code is detected.

FEPL failure Cnt

Displays a count of far-end protection-line (FEPL) failure conditions. This condition is declared based on receiving SF on the protection line in the K1 byte.

No. of Switchovers

Displays the number of times a switchover has occurred.

Last Switchover

Displays the time stamp of the last switchover.

Switchover seconds

Displays the cumulative Protection Switching Duration (PSD) time in seconds.

For a working channel, this is the cumulative number of seconds that service was carried on the protection line.

For the protection line, this is the cumulative number of seconds that the protection line has been used to carry any working channel traffic. This information is only valid if revertive switching is enabled.

Signal Degrade Cnt

Displays the number of times the signal was degraded.

Signal Failure Cnt

Displays the number of times the signal failed.

Last Switch Cmd

Reports the last switch command that was performed on a circuit.

Last Exercise Result

The result of the last exercise request on a circuit.

Neighbor address

Displays the neighbor IP address.

Advertise Interval

Displays the advertise interval.

Hold time

Displays the hold time.

2.21.2.4. Port Show Commands

port

Syntax 
port [port-id] [statistics [egress-aggregate]] [detail]
port port-id associations
port [port-id] description
port port-id dotx1 [detail]
port aps
port [port-id] cem
port port-id atm [detail]
port port-id atm connections
port port-id atm cp [cp] [detail]
port port-id atm ilmi [detail]
port port-id atm interface-connection [detail]
port port-id atm pvc [vpi[/vci]] [detail]
port port-id atm pvp [vpi] [detail]
port port-id atm pvt [vpi1.vpi2] [detail]
port port-id cisco-hldc
port port-id ethernet [association | detail]
port port-id ethernet [association | detail] efm-oam [event-logs [{failure | degraded}] [{active | cleared}]]
port port-id ethernet [association | detail] lldp [nearest-bridge | nearest-non-tpmr | nearest-customer] [remote-info] [detail]
port port-id frame-relay [detail]
port port-id ima-link
port port-id macsec [detail] [statistics]
port port-id mlfr-link
port port-id monitor-threshold
port port-id optical
port port-id otu
port port-id ppp [detail]
port port-id queue-group [ingress | egress] [queue-group-name] [access | network] [instance instance-id]
port port-id queue-group [ingress | egress] [queue-group-name] [access | network] associations [instance instance-id]
port port-id queue-group [ingress | egress] queue-group-name [access | network] [instance instance-id] queue-depth [queue queue-id]
port port-id queue-group [ingress | egress] [queue-group-name] [access | network] statistics [instance instance-id]
port port-id queue-group summary
port port-id secondary-shaper secondary-shaper-name [associations]
port port-id vport vport-name monitor-threshold
port port-id wavekey-table {50g | 100g}
port port-id wavelength-table
port port-id port-id wavetracker
Context 
show
Description 

This command displays port or channel information.

If the port-id parameter only specifies a portion of a port identifier then a summary of all ports that start with that portion is displayed. For example, specifying a slot number and mda number will present a summary of all ports on that mda. If no port-id is provided then a summary of all ports in the system is displayed.

If the detail keyword is specified without any port-id then the detailed output of every port is displayed. This is useful for gathering full reporting or as an input into the "| match" post-filtering command to display only certain fields for all ports (customized summaries).

If the port-identifier specifies a unique port, then information about that port is displayed. The specific information displayed depends on the type of port. Additional information can be displayed if the detail is included. In addition, information subsets can be presented by using various keywords. For example, the otu keyword displays only the OTU Interface information for the port.

Parameters 
port-id—
Specifies the physical port ID in the form slot/mda/port.
Values—

port-id

slot[/mda[/port]] or

slot/mda/port [.channel]

aps-id

aps-group-id[.channel]

aps

keyword

group-id

1 to 64

ccag-id

slot/mda/path-id[cc-type]

path-id

a,b

cc-type

.sap-net, .net-sap

eth-sat-id

esat-id [/slot/[u]port]

esat

keyword

id

1 to 20

u

keyword for up-link port

pxc-id

pxc-id.sub-port

pxc

keyword

id

1 to 64

sub-port

a, b

Table 69:  Port ID Values 

Product

Slot

MDA

CMA

Port

Values

7750 SR-12

1 to 10

1, 2

1 to 60

(depending on the MDA type)

7750 SR-c12

1

1, 3, 5, 7, 9, 11

1 to 12

7750 SR-c4

1

1, 3

1 to 4

7750 SR-7

1 to 5

1, 2

7950 XRS

1 to 20

7450 ESS-7

1 to 4

7450 ESS-12

1 to 0

Channelized MDAs

CHOC12-SFP

slot/mda/port. [1 to 4]. [1 to 3]. [1 to 28]. [..24]

For example, 7/2/1.1.1.28.24

CHOC3-SFP

slot/mda/port. [1 to 3]. [1 to 28]. [..24]

For example, 7/2/1.1.28.24

DS3

slot/mda/port. [1 to 28] . [..24]

For example, 7/1/1.1.1

 

statistics—
Displays port statistics.
egress-aggregate—
Displays aggregate egress statistics.
detail—
Provides detailed information.
associations—
Displays a list of current router interfaces to which the port is associated.
description—
Displays port description strings.
dot1x—
Displays information about 802.1x status and statistics.
aps—
Displays ports on APS groups.
cem—
Displays CEM encap ports and channels.
atm—
Displays ATM information.
connections—
Displays ATM connection information.
cp—
Displays ATM port connection profile information.
ilmi—
Displays ATM ILMI information.
interface-connection—
Displays ATM connection information.
pvc—
Displays ATM port PVC information.
pvp—
Displays ATM port PVP information.
pvt—
Displays ATM port PVT information.
vci—
Specifies the ATM network virtual channel identifier (VCI).
Values—
1, 2, 5 to 65535

 

vpi—
Specifies the ATM network virtual path identifier (VPI).
Values—
0 to 4095 (NNI)
0 to 255 (UNI)

 

vpi1.vpi2—
Specifies the ATM network virtual path identifiers (VPIs).
Values—
0 to 4095.0 to 4095 (NNI)
0 to 255.0 to 255 (UNI)

 

cisco-hdlc—
Displays Cisco HDLC port information.
ethernet—
Displays Ethernet port information.
failure—
Keyword to display failure severity events.
degraded—
Keyword to display degrade severity events.
active—
Keyword to display only active events.
cleared—
Keyword to display remote information on the bridge MAC.
frame-relay—
Displays Frame Relay information.
nearest bridge—
Displays nearest bridge information.
nearest-non-tpmr—
Displays nearest Two-Port MAC Relay (TPMR) information.
nearest-customer—
Displays nearest customer information.
remote-info—
Displays remote information on the bridge MAC.
ima-link—
Displays the link-based IMA information for the port.
macsec—
Displays the MACsec information for the port.
mlfr-link—
Displays link-based MLFR information for the port.
monitor-threshold—
Displays the exceed-count for the port-scheduler under Vport (if specified) or for a physical port.
optical—
Displays optical information.
otu—
Displays optical transport unit (OTU) information.
ppp—
Displays PPP protocol information for the port.
queue-group—
Displays the queue group information.
queue-depth—
Displays the queue depth information.
instance-id—
Specifies the identification of a specific instance of the queue group.
Values—
1 to 65535

 

secondary-shaper-name—
Specifies the secondary shaper name to apply to the port up to 32 characters in length.
vport-name—
Specifies the name of the Vport up to 32 characters in length.
associations—
Displays a list of ports to which the Vport is assigned.
wavekey-table—
Displays a table of acceptable wave-keys for the different DWDM channels.
50g | 100g—
Displays specified DWDM wave key table information.
wavelength-table—
Displays DWDM wave length table information.
wavetracker—
Displays Wave Tracker information.
Output 

See the following sections for output samples:

Sample Output: show port <port-id> (Summary Table of Ports)
*A:ALU-1# show port 1/1 
==============================================================================
Ports on Slot 1
==============================================================================
Port        Admin Link Port    Cfg  Oper LAG/ Port Port Port   SFP/XFP/       
Id          State      State   MTU  MTU  Bndl Mode Encp Type   MDIMDX         
------------------------------------------------------------------------------
1/1/1       Down  No   Down    1518 1518    1 accs dotq gige                  
1/1/2       Down  No   Down    1578 1578    - netw null gige                  
1/1/3       Down  No   Down    1578 1578    - netw null gige                  
1/1/4       Up    No   Down    1514 1514    - accs null gige                  
1/1/5       Up    No   Down    1578 1578    - netw null gige                  
==============================================================================
*A:ALU-1#
Output Fields: show port <port-id>

Table 70 describes the output fields for the show port <port-id> command.

Table 70:  Output Fields: show port <port-id> 

Label

Description  

Port ID

The port ID configured or displayed.

Admin State

Up — The administrative state is up.

Down — The administrative state is down.

Phy Link

Yes — A physical link is present.

No — A physical link is not present.

Port State

Up — The port is physically present and has physical link present.

Down — The port is physically present but does not have a link. Note that this state may also be considered as Link Down.

Ghost — A port that is not physically present.

None — The port is in its initial creation state or about to be deleted.

Link Up — A port that is physically present and has physical link present.

Note that when Link Up appears at the lowest level of a SONET/SDH path or a TDM tributary, it means the physical connection is active but the port is waiting on some other state before data traffic can flow. It is a waiting state and indicates that data traffic will not flow until it transitions to the Up state.

Cfg MTU

The configured MTU.

Oper MTU

The negotiated size of the largest packet which can be sent on the port SONET/SDH, channel, specified in octets.

For channels that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the channel.

LAG ID

The LAG or multi-link trunk (MLT) that the port is assigned to.

Port Mode

Network — The port is configured for transport network use.

Access — The port is configured for service access.

Hybrid — The port is configured for both access and network use.

Port Encap

Null — Ingress frames will not use tags or labels to delineate a service.

dot1q — Ingress frames carry 802.1Q tags where each tag signifies a different service.

Port Type

The type of port or optics installed.

SFP/MDI MDX

GIGE — Indicates the GigE SFP type.

FASTE — Indicates the FastE SFP type.

GIGX — Indicates the GigX SFP type.

MDI — Indicates that the Ethernet interface is of type MDI (Media Dependent Interface).

MDX — Indicates that the Ethernet interface is of type MDX (Media Dependent Interface with crossovers).

Sample Output: show port <port-id> (Showing Ethernet Interface)
 
*A:ALU-211# show port 1/1/2
===============================================================================
Ethernet Interface
===============================================================================
Description        : 10/100 Ethernet TX
Interface          : 1/1/2                      Oper Speed       : 100 mbps
Link-level         : Ethernet                   Config Speed     : 100 mbps
Admin State        : up                         Oper Duplex      : full
Oper State         : up - Active in LAG 10      Config Duplex    : full
Physical Link      : Yes                        MTU              : 1514
Single Fiber Mode  : No
IfIndex            : 35717120                   Hold time up     : 0 seconds
Last State Change  : 12/16/2008 19:31:40        Hold time down   : 0 seconds
Last Cleared Time  : 12/16/2008 19:31:48
.....
===============================================================================
*A:ALU-211# 
 
 
*A:ALU-1# show port 5/1/4
===============================================================================
Ethernet Interface
===============================================================================
Description        : 10-Gig Ethernet
Interface          : 5/1/4                      Oper Speed       : 10 Gbps
Link-level         : Ethernet                   Config Speed     : N/A
Admin State        : up                         Oper Duplex      : full
Oper State         : down                       Config Duplex    : N/A
Physical Link      : No                         MTU              : 9212
Single Fiber Mode  : No                         Min Frame Length : 64 Bytes
IfIndex            : 170000384                  Hold time up     : 0 seconds
Last State Change  : 04/28/2017 13:09:15        Hold time down   : 0 seconds
Last Cleared Time  : N/A                        DDM Events       : Enabled
Phys State Chng Cnt: 10                         RS-FEC Mode      : None
 
Configured Mode    : network                    Encap Type       : null
Dot1Q Ethertype    : 0x8100                     QinQ Ethertype   : 0x8100
PBB Ethertype      : 0x88e7                     
Ing. Pool % Rate   : 100                        Egr. Pool % Rate : 100
Ing. Pool Policy   : n/a
Egr. Pool Policy   : n/a
Net. Egr. Queue Pol: default                    
Egr. Sched. Pol    : n/a
HS Scheduler Plcy  : default
HS Port Pool Plcy  : default
Monitor Port Sched : Disabled                   
Monitor Agg Q Stats: Disabled                   
Auto-negotiate     : N/A                        MDI/MDX          : N/A
Oper Phy-tx-clock  : not-applicable             
Accounting Policy  : None                       Collect-stats    : Disabled
Acct Plcy Eth Phys : None                       Collect Eth Phys : Disabled
Egress Rate        : Default                    Ingress Rate     : Default
Load-balance-algo  : Default                    LACP Tunnel      : Disabled
Access Bandwidth   : Not-Applicable             Booking Factor   : 100
Access Available BW: 0                          
Access Booked BW   : 0                          
Sflow              : Disabled                   
 
Suppress Threshold : 1500                       Reuse Threshold  : 1000
Max Penalties      : 4000                       Max Suppress Time: 40 seconds
Half Life          : 20 seconds                 
 
Down-when-looped   : Disabled                   Keep-alive       : 10
Loop Detected      : False                      Retry            : 120
Use Broadcast Addr : False                      
 
Sync. Status Msg.  : Disabled                   Rx Quality Level : N/A
Tx DUS/DNU         : Disabled                   Tx Quality Level : N/A
SSM Code Type      : sdh
 
Down On Int. Error : Disabled                   DOIE Tx Disable  : Disabled
 
CRC Mon SD Thresh  : Disabled                   CRC Mon Window   : 10 seconds
CRC Mon SF Thresh  : Disabled                   
 
Sym Mon SD Thresh  : Disabled                   Sym Mon Window   : 10 seconds
Sym Mon SF Thresh  : Disabled                   Tot Sym Mon Errs : 0
 
EFM OAM            : Disabled                   EFM OAM Link Mon : Disabled
Ignr EFM OAM State : False                      
 
Configured Address : 10:e8:78:4d:24:f0
Hardware Address   : 10:e8:78:4d:24:f0
Cfg Alarm          : remote local
 
Transceiver Data
 
Transceiver Status : operational
Transceiver Type   : SFP
Model Number       : 3HE04823AAAA01  ALA  IPU3ANKEAA
TX Laser Wavelength: 1310 nm                    Diag Capable     : yes
Connector Code     : LC                         Vendor OUI       : 00:90:65
Manufacture date   : 2016/07/23                 Media            : Ethernet
Serial Number      : AW40PC8         
Part Number        : FTLX1471D3BCL-A5
Optical Compliance : 10GBASE-LR 
Link Length support: 10km for SMF
 
===============================================================================
Transceiver Digital Diagnostic Monitoring (DDM), Internally Calibrated
===============================================================================
                              Value High Alarm  High Warn   Low Warn  Low Alarm
-------------------------------------------------------------------------------
Temperature (C)               +38.1     +78.0      +73.0       -8.0      -13.0 
Supply Voltage (V)             3.31      3.70       3.60       3.00       2.90 
Tx Bias Current (mA)           40.4      85.0       80.0       20.0       15.0 
Tx Output Power (dBm)         -1.30      2.00       1.00      -7.00      -8.00 
Rx Optical Power (avg dBm)    -1.38      2.50       2.00     -18.01     -20.00 
===============================================================================
===============================================================================
 
===============================================================================
OTU Interface
===============================================================================
OTU Status         : Disabled                   
===============================================================================
 
===============================================================================
Traffic Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                                 0                      0
Packets                                                0                      0
Errors                                                 0                      0
Utilization (300 seconds)                          0.00%                  0.00%
 
===============================================================================
Port Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Unicast Packets                                        0                      0
Multicast Packets                                      0                      0
Broadcast Packets                                      0                      0
Discards                                               0                      0
Unknown Proto Discards                                 0 
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors :                   0  Sngl Collisions  :                   0
FCS Errors       :                   0  Mult Collisions  :                   0
SQE Test Errors  :                   0  Late Collisions  :                   0
CSE              :                   0  Excess Collisns  :                   0
Too long Frames  :                   0  Int MAC Tx Errs  :                   0
Symbol Errors    :                   0  Int MAC Rx Errs  :                   0
In Pause Frames  :                   0  Out Pause Frames :                   0
===============================================================================
Sample Output: show port <port-id> detail (Ethernet Interface Port)
A:ALU-1# show port 5/1/4 detail
===============================================================================
Ethernet Interface
===============================================================================
Description        : 10-Gig Ethernet
Interface          : 5/1/4                      Oper Speed       : 10 Gbps
Link-level         : Ethernet                   Config Speed     : N/A
Admin State        : up                         Oper Duplex      : full
Oper State         : down                       Config Duplex    : N/A
Physical Link      : No                         MTU              : 9212
Single Fiber Mode  : No                         Min Frame Length : 64 Bytes
IfIndex            : 170000384                  Hold time up     : 0 seconds
Last State Change  : 04/28/2017 13:09:15        Hold time down   : 0 seconds
Last Cleared Time  : N/A                        DDM Events       : Enabled
Phys State Chng Cnt: 10                         RS-FEC Mode      : None
 
Configured Mode    : network                    Encap Type       : null
Dot1Q Ethertype    : 0x8100                     QinQ Ethertype   : 0x8100
PBB Ethertype      : 0x88e7                     
Ing. Pool % Rate   : 100                        Egr. Pool % Rate : 100
Ing. Pool Policy   : n/a
Egr. Pool Policy   : n/a
Net. Egr. Queue Pol: default                    
Egr. Sched. Pol    : n/a
HS Scheduler Plcy  : default
HS Port Pool Plcy  : default
Monitor Port Sched : Disabled                   
Monitor Agg Q Stats: Disabled                   
Auto-negotiate     : N/A                        MDI/MDX          : N/A
Oper Phy-tx-clock  : not-applicable             
Accounting Policy  : None                       Collect-stats    : Disabled
Acct Plcy Eth Phys : None                       Collect Eth Phys : Disabled
Egress Rate        : Default                    Ingress Rate     : Default
Load-balance-algo  : Default                    LACP Tunnel      : Disabled
Access Bandwidth   : Not-Applicable             Booking Factor   : 100
Access Available BW: 0                          
Access Booked BW   : 0                          
Sflow              : Disabled                   
 
Dampening State    : Active                     Current Penalties: 2297
Suppress Threshold : 1500                       Reuse Threshold  : 1000
Max Penalties      : 4000                       Max Suppress Time: 40 seconds
Half Life          : 20 seconds                 
 
Down-when-looped   : Disabled                   Keep-alive       : 10
Loop Detected      : False                      Retry            : 120
Use Broadcast Addr : False                      
 
Sync. Status Msg.  : Disabled                   Rx Quality Level : N/A
Tx DUS/DNU         : Disabled                   Tx Quality Level : N/A
SSM Code Type      : sdh
 
Down On Int. Error : Disabled                   DOIE Tx Disable  : Disabled
 
CRC Mon SD Thresh  : Disabled                   CRC Mon Window   : 10 seconds
CRC Mon SF Thresh  : Disabled                   
 
Sym Mon SD Thresh  : Disabled                   Sym Mon Window   : 10 seconds
Sym Mon SF Thresh  : Disabled                   Tot Sym Mon Errs : 0
 
EFM OAM            : Disabled                   EFM OAM Link Mon : Disabled
Ignr EFM OAM State : False                      
 
Configured Address : 10:e8:78:4d:24:f0
Hardware Address   : 10:e8:78:4d:24:f0
Cfg Alarm          : remote local
 
Transceiver Data
 
Transceiver Status : operational
Transceiver Type   : SFP
Model Number       : 3HE04823AAAA01  ALA  IPU3ANKEAA
TX Laser Wavelength: 1310 nm                    Diag Capable     : yes
Connector Code     : LC                         Vendor OUI       : 00:90:65
Manufacture date   : 2016/07/23                 Media            : Ethernet
Serial Number      : AW40PC8         
Part Number        : FTLX1471D3BCL-A5
Optical Compliance : 10GBASE-LR 
Link Length support: 10km for SMF
 
===============================================================================
Transceiver Digital Diagnostic Monitoring (DDM), Internally Calibrated
===============================================================================
                              Value High Alarm  High Warn   Low Warn  Low Alarm
-------------------------------------------------------------------------------
Temperature (C)               +38.1     +78.0      +73.0       -8.0      -13.0 
Supply Voltage (V)             3.31      3.70       3.60       3.00       2.90 
Tx Bias Current (mA)           40.3      85.0       80.0       20.0       15.0 
Tx Output Power (dBm)         -1.29      2.00       1.00      -7.00      -8.00 
Rx Optical Power (avg dBm)    -1.38      2.50       2.00     -18.01     -20.00 
===============================================================================
===============================================================================
 
===============================================================================
OTU Interface
===============================================================================
OTU Status         : Disabled                   
===============================================================================
 
===============================================================================
Traffic Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                                 0                      0
Packets                                                0                      0
Errors                                                 0                      0
Utilization (300 seconds)                          0.00%                  0.00%
 
===============================================================================
Ethernet Statistics
===============================================================================
Broadcast Pckts  :                   0  Drop Events      :                   0
Multicast Pckts  :                   0  CRC/Align Errors :                   0
Undersize Pckts  :                   0  Fragments        :                   0
Oversize Pckts   :                   0  Jabbers          :                   0
Collisions       :                   0
Octets                         :                   0
Packets                        :                   0
Packets of 64 Octets           :                   0
Packets of 65 to 127 Octets    :                   0
Packets of 128 to 255 Octets   :                   0
Packets of 256 to 511 Octets   :                   0
Packets of 512 to 1023 Octets  :                   0
Packets of 1024 to 1518 Octets :                   0
Packets of 1519 or more Octets :                   0
===============================================================================
 
===============================================================================
Port Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Unicast Packets                                        0                      0
Multicast Packets                                      0                      0
Broadcast Packets                                      0                      0
Discards                                               0                      0
Unknown Proto Discards                                 0 
===============================================================================
 
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors :                   0  Sngl Collisions  :                   0
FCS Errors       :                   0  Mult Collisions  :                   0
SQE Test Errors  :                   0  Late Collisions  :                   0
CSE              :                   0  Excess Collisns  :                   0
Too long Frames  :                   0  Int MAC Tx Errs  :                   0
Symbol Errors    :                   0  Int MAC Rx Errs  :                   0
In Pause Frames  :                   0  Out Pause Frames :                   0
===============================================================================
 
===============================================================================
Per Threshold MDA Discard Statistics
===============================================================================
                                Packets                 Octets
-------------------------------------------------------------------------------
Threshold 0 Dropped :           0                       0                     
Threshold 1 Dropped :           0                       0                     
Threshold 2 Dropped :           0                       0                     
Threshold 3 Dropped :           0                       0                     
Threshold 4 Dropped :           0                       0                     
Threshold 5 Dropped :           0                       0                     
Threshold 6 Dropped :           0                       0                     
Threshold 7 Dropped :           0                       0                     
Threshold 8 Dropped :           0                       0                     
Threshold 9 Dropped :           0                       0                     
Threshold 10 Dropped :          0                       0                     
Threshold 11 Dropped :          0                       0                     
Threshold 12 Dropped :          0                       0                     
Threshold 13 Dropped :          0                       0                     
Threshold 14 Dropped :          0                       0                     
Threshold 15 Dropped :          0                       0                     
===============================================================================
 
===============================================================================
Ingress Port Forwarding Engine Drop Reason Statistics
===============================================================================
IPv4 Header Error                                      0
IPv4 Invalid Address                                   0
IPv6 Header Error                                      0
IPv6 Invalid Address                                   0
IP Route Blackholed                                    0
ACL Filter Discards                                    0
Unicast RPF Check Failed                               0
BFD Spoof Check Failed                                 0
Unicast MAC Destination Address Mismatch               0
Multicast MAC With Unicast Dest IP                     0
Unknown MAC Destination Address Discarded in VPLS      0
L2 Service MTU Exceeded                                0
Needs ICMP                                             0
===============================================================================
 
===============================================================================
Queue Statistics
===============================================================================
                                                        
-------------------------------------------------------------------------------
Ingress Queue  1             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  2             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  3             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  4             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  5             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  6             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  7             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  8             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  9             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 10             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 11             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 12             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 13             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 14             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 15             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 16             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
 
Egress Queue  1              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
Egress Queue  2              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
Egress Queue  3              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
Egress Queue  4              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
Egress Queue  5              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
Egress Queue  6              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
Egress Queue  7              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
Egress Queue  8              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
===============================================================================
Output Fields: show port <port-id> detail

Table 71 describes the output fields for the show port <port-id> detail command.

Table 71:  Output Fields: show port <port-id> detail  

Label

Description  

Description

A text description of the port.

Interface

The port ID displayed in the slot/mda/port format.

Oper Speed

The operating speed of the interface.

Link-level

Ethernet — The port is configured as Ethernet.

SONET — The port is configured as SONET-SDH.

Config Speed

The configured speed of the interface.

Admin State

up — The port is administratively up.

down — The port is administratively down.

Oper Duplex

full — The link is set to full duplex mode.

half — The link is set to half duplex mode.

Oper State

up — The port is operationally up.

down — The port is operationally down.

Additionally, the lag-id of the LAG it belongs to in addition to the status of the LAG member (active or standby) is specified.

Config Duplex

Full — The link is set to full duplex mode.

Half — The link is set to half duplex mode.

Physical Link

Yes — A physical link is present.

No — A physical link is not present.

MTU

The size of the largest packet which can be sent/received on the Ethernet physical interface, specified in octets.

Single Fiber Mode

Yes - Single fiber option is configured.

No - Single fiber option is not configured.

Min Frame Length

Displays the configured minimum transmitted frame length.

IfIndex

Displays the interface's index number which reflects its initialization sequence.

Hold time up

The link up dampening time in seconds. The port link dampening timer value which reduces the number of link transitions reported to upper layer protocols.

Last State Change

Displays the system time moment that the MC-LAG group is up.

Hold time down

The link down dampening time in seconds. The down timer controls the dampening timer for link down transitions.

Last Cleared Time

Displays the system time moment that the peer is up.

DDM Events

Enabled — DDM events are enabled.

Disabled — DDM events are disabled.

Phys State Chng Cnt

Increments when a fully qualified (de-bounced) transition occurs at the physical layer of an ethernet port which includes the following transitions of the Port State as shown in the “show port” summary:

- from “Down” to either “Link Up” or “Up”

- from either “Link Up” or “Up” to “Down”

This counter does not increment for changes purely in the link protocol states (e.g. "Link Up" to "Up"). The counter is reset if the container objects for the port are deleted (e.g. MDA deconfigured, or IOM type changes).

RS-FEC Mode

Specifies the RS-FEC mode to support.

Configured Mode

network — The port is configured for transport network use.

access — The port is configured for service access.

Encap Type

Null — Ingress frames will not use any tags or labels to delineate a service.

dot1q — Ingress frames carry 802.1Q tags where each tag signifies a different service.

Dot1Q Ethertype

Indicates the Ethertype expected when the port's encapsulation type is Dot1Q.

QinQ Ethertype

Indicates the Ethertype expected when the port's encapsulation type is QinQ.

PBB Ethertype

Indicates the Ethertype used for PBB encapsulation.

Net. Egr. Queue Pol

Specifies the network egress queue policy or that the default policy is used.

Egr. Sched. Pol

Specifies the port scheduler policy or that the default policy default is in use.

Monitor Port Sched

Enabled — Congestion monitoring on an Egress Port Schedule (EPS) is enabled.

Disabled — Congestion monitoring on an EPS is disabled.

Auto-negotiate

True — The link attempts to automatically negotiate the link speed and duplex parameters.

False — The duplex and speed values are used for the link.

Collect-stats

Enabled — The collection of accounting and statistical data for the network Ethernet port is enabled. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file.

Disabled — Collection is disabled. Statistics are still accumulated by the IOM cards, however, the CPU will not obtain the results and write them to the billing file.

Egress Rate

The maximum amount of egress bandwidth (in kilobits per second) that this Ethernet interface can generate.

Ingress Rate

Indicates the maximum amount of ingress bandwidth (in mb/s) that this Ethernet port can receive with the configured sub-rate using packet-based accounting.

Load-balance-algo

Indicates the load balancing algorithm used on the port.

LACP Tunnel

Indicates whether LACP packet tunneling is enabled or disabled.

Sflow

Enabled — sFlow data collection for the port is enabled.

Disabled — sFlow data collection is disabled..

Dampening State

Displays the port dampening state: Disabled, Idle, or Active

Current Penalties

Displays the current accumulated penalties for port dampening.

Suppress Threshold

Displays the threshold at which the port-up state is suppressed until the accumulated penalties drop below the reuse threshold again.

Reuse Threshold

Displays the threshold at which the port-up state is no longer suppressed, after the port has been in a suppressed state and the accumulated penalties decay drops below this threshold.

Max Penalties

Displays the maximum penalty value for port dampening.

Max Suppress Time

Displays the time, in seconds, it can take after the link comes up before the worst case accumulated penalties have decayed to the reuse threshold.

Half Life

Displays the time, in seconds, that must pass before penalties decay to one-half the initial amount.

Down-when-looped

Shows whether the feature is enabled or disabled.

Keep Alive

Displays the time interval, in seconds, between keep-alive PDUs.

Loop Detected

True — Loop detected.

False — No loop detected.

Retry

Displays the minimum wait time, in seconds, before re-enabling the port after loop detection.

Use Broadcast Addr

True — Indicates that the broadcast address is to be used for the destination MAC address.

False — Indicates that the local port MAC address is to be used for the destination MAC address.

Sync. Status Msg

Whether synchronization status messages are enabled or disabled.

Rx Quality Level

Indicates which QL value has been received from the interface.

Tx DUS/DNU

Whether the QL value is forcibly set to QL-DUS/QL-DNU.

Tx Quality Level

Indicates which QL value is being transmitted out of the interface.

SSM Code Type

Indicates the SSM code type in use on the port.

Down On Int. Error

Enabled — Down on internal error feature is enabled.

Disabled — Down on internal error feature is disabled.

DOIE Tx Disable

Enabled — Laser is enabled if an internal MAC transmit error is encountered.

Disabled — Laser is disabled if an internal MAC transmit error is encountered.

CRC Mon SD Thresh

Specifies the error rate (for CRC errors) at which to declare the Signal Degrade (SD) condition on an Ethernet interface. If the field displays Disabled, no error rate has been specified.

CRC Mon Window

Specifies the size of the sliding window, in seconds, over which the Ethernet frames are sampled to detect signal fail or signal degrade conditions.

CRC Mon SF Thresh

Specifies the CRC error rate at which to declare the Signal Fail (SF) condition on an Ethernet interface. If the field displays Disabled, no error rate has been specified.

Sym Mon SD Thresh

Specifies the error rate (for symbol errors) at which to declare the Signal Degrade (SD) condition on an Ethernet interface. If the field displays Disabled, no error rate has been specified.

Sym Mon Window

Indicates the size of the sliding window, in seconds, over which the errors are measured.

Sym Mon SF Thresh

Specifies the symbol error rate at which to declare the Signal Fail (SF) condition on an Ethernet interface. If the field displays Disabled, no error rate has been specified.

Tot Sym Mon Errs

Displays the total number of symbol errors.

EFM OAM

Enabled — EFM OAM is enabled.

Disabled — EFM OAM is disabled.

EFM OAM Link Mon

Enabled — Link monitoring functionality is enabled.

Disabled — Link monitoring functionality is disabled.

Ignr EFM OAM State

Enabled — Any failure in the protocol state machine does not impact the state of the port.

Disabled — The port state is affected by any existing EFM-OAM protocol fault condition

Configured Address

The base chassis Ethernet MAC address.

Hardware Address

The interface's hardware or system assigned MAC address at its protocol sub-layer.

Transceiver Data

See Table 72.

Transceiver Status

Status of the transceiver.

Transceiver Type

Type of the transceiver.

Model Number

The model number of the transceiver.

TX Laser Wavelength

Indicates the transceiver laser wavelength.

Diag Capable

Indicates if the transceiver is capable of doing diagnostics.

Connector Code

The vendor organizationally unique identifier field (OUI)

contains the IEEE company identifier for the vendor.

Vendor OUI

The vendor-specific identifier field (OUI) contains the IEEE company identifier for the vendor.

Manufacture date

The manufacturing date of the hardware component in the mmddyyyy ASCII format.

Media

The media supported for the SFP.

Serial Number

The vendor serial number of the hardware component.

Part Number

The vendor part number contains ASCII characters, defining the vendor part number or product name.

Optical Compliance

Specifies the optical compliance code of the transceiver.

Link Length support

Specifies the link length support for the transceiver.

Transceiver Digital Diagnostic Monitoring (DDM)

Displays information for the transceiver Digital Diagnostic Monitoring (DDM), such as temperature and supply voltage.

Traffic Statistics

Input/Output

When the collection of accounting and statistical data is enabled, then octet, packet, error, and utilization statistics are displayed.

Errors Input/Output

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol.

For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors.

Utilization Input/Output

The value computed as the average of the traffic observed over the configured interval, presented as a percentage of the maximum possible traffic.

Ethernet Statistics

See Table 73.

Port Statistics

Unicast Packets Input/Output

The number of packets, delivered by this sub-layer to a higher (sub-) layer, which were not addressed to a multicast or broadcast address at this sub-layer. The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.

Multicast Packets Input/Output

The number of packets, delivered by this sub-layer to a higher (sub-) layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both group and functional addresses. The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses.

Broadcast Packets Input/Output

The number of packets, delivered by this sub-layer to a higher (sub-) layer, which were addressed to a broadcast address at this sub-layer.

The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent.

For a MAC layer protocol, this includes both Group and Functional addresses.

Discards Input/Output

The number of inbound packets chosen to be discarded to possibly free up buffer space.

Unknown Proto Discards Input/Output

For packet-oriented interfaces, the number of packets received through the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protocol multiplexing the number of transmission units received via the interface which were discarded because of an unknown or unsupported protocol. For any interface that does not support protocol multiplexing, this counter will always be 0. For ATM, this field displays cells discarded on an invalid vpi/vci. Unknown proto discards do not show up in the packet counts.

Ethernet-like Medium Statistics

See Table 74.

Per Threshold MDA Discard Statistics

Ingress Port Forwarding Engine Drop Reason Statistics

When any of the packet counters increments, it indicates that a packet was dropped in the ingress datapath or extracted to the control plane for further processing. The detailed per-reason drop statistics are available per-port for Ethernet ports (local on the 7450 ESS, 7750 SR, 7950 XRS, or Satellite client ports) and for PXC sub-ports. An aggregate forwarding engine drop counter (packet and byte) is available per-SAP.

IPv4 Header Error

The IPv4 packet header contains an error such as an IPv4 header checksum error, an invalid IP version number (not 4 or 6), or an incorrect Total Length field.

IPv4 Invalid Address

An error in the source (SA) or destination (DA) IPv4 address was detected. For example class D or class E IPv4 DAs, loopback SA (127.0.0.0/8), 0.0.0.0/8 DA, SA is a subnet broadcast or network address and cases where the IPv4 address is a multicast address but the Ethernet destination address is not RFC1112 compliant. RFC1112 checks are also carried out on IPIPE traffic.

IPv6 Header Error

The IPv6 packet header contains an error such as an incorrect Payload Length field or an IP version not equal to '6' when the Ethernet etype or PPP ID indicates it is IPv6.

IPv6 Invalid Address

An error in the source (SA) or destination (DA) IPv6 address was detected. For example, an unspecified IPv6 DA, an IPv6 multicast SA and cases where the IPv6 address is a multicast address but the Ethernet destination address is not RFC2464 compliant. RFC 2464 checks are also carried out on IPIPE traffic.

IP Route Blackholed

The destination IP address of the packet matches a black hole route.

ACL Filter Discards

The packet was dropped by a filter (ACL) on the line card (such as IP or MAC filter). Packets dropped by CPM filters or ESM antispoof filters do not increment this counter.

Unicast RPF Check Failed

The IP packet failed the unicast reverse path forwarding (uRPF) check.

BFD Spoof Check Failed

The received BFD packet either failed the TTL check (single hop BFD TTL should be 255) or failed the source IP address lookup of known sessions. This counter may increment when BFD sessions are first configured since one side may start sending before the other is completely programmed and ready.

Unicast MAC Destination Address Mismatch

The unicast destination MAC address is a null address or does not match any of the expected MAC addresses associated with the receiving interface. Packets with multicast or broadcast MAC addresses do not increment this counter.

Multicast MAC With Unicast Dest IP

The Ethernet destination (MAC) address is multicast but the IP address is unicast.

Unknown MAC Destination Address Discarded in VPLS

The MAC destination address lookup in the MAC FDB failed and the VPLS service is configured to discard packets with unknown destination MAC addresses.

L2 Service MTU Exceeded

The length of the packet received on a SAP bound to a layer 2 service (such as VPLS or EPIPE) exceeded the configured MTU for the service.

Needs ICMP

The received packet requires the router to generate an ICMP message. For example, the IP packet TTL is expired or the destination host, network, or Enhanced Subscriber Management (ESM) subscriber is unreachable. Host unreachable can occur, among other reasons, if the destination address (e.g. 10.0.1.2) of a packet resolves to a loopback interface subnet (e.g. 10.0.1.1/24) but doesn't match the specific loopback address (e.g. 10.0.1.1). Destination unreachable can also occur, for example, in response to an IPv6 packet received by a router from a point-to-point link (a non-Ethernet link) destined to an address within a subnet assigned to that same link (other than one of the receiving router's own addresses) as described in RFC 4443.

Sample Output: show port <port id> optical detail
*A:ALU-1# show port 4/1/1 optical detail
===============================================================================
Optical Interface
===============================================================================
Transceiver Data
 
Transceiver Status : operational
Transceiver Type   : MSA-100GLH
Model Number       : 28-0089-XX
TX Laser Wavelength: 1558.172 nm                Present Channel  : 24
TX Laser Frequency : 192.400 THz                Configured Chann*: 24
Laser Tunability   : fully-tunable              50GHz Ch Min/Max : 115/605
                                                100GHz Ch Min/Max: 12/61
RxDTV Adjust       : Enabled                    DAC Percent      : 50.00 %
Diag Capable       : yes                        
Number of Lanes    : 1                          
Connector Code     : LC                         Vendor OUI       : 00:03:fa
Manufacture date   : 2012/07/16                 Media            : Ethernet
Serial Number      : 122900645
Part Number        : AC100-201-00E
Optical Compliance : DWDM-TUN 
Link Length support: 80km for SMF
 
===============================================================================
Transceiver Digital Diagnostic Monitoring (DDM)
===============================================================================
                              Value High Alarm  High Warn   Low Warn  Low Alarm
-------------------------------------------------------------------------------
Temperature (C)               +60.9     +80.0      +70.0       +0.0       -5.0 
Supply Voltage (V)            12.07     13.00      12.60      11.40      11.00 
===============================================================================
 
===============================================================================
Transceiver Lane Digital Diagnostic Monitoring (DDM)
===============================================================================
                                 High Alarm   High Warn    Low Warn   Low Alarm
-------------------------------------------------------------------------------
Lane Temperature (C)                  +75.0       +70.0       +20.0       +15.0
Lane Tx Bias Current (mA)              10.0         9.0         3.0         2.0
Lane Tx Output Power (dBm)             3.00        2.00        0.00       -1.00
Lane Rx Optical Pwr (avg dBm)          8.16        5.00      -20.00      -23.01
 
-------------------------------------------------------------------------------
Lane ID Temp(C)/Alm       Tx Bias(mA)/Alm   Tx Pwr(dBm)/Alm   Rx Pwr(dBm)/Alm 
-------------------------------------------------------------------------------
    1          +48.4               5.1              0.99            -10.45     
===============================================================================
 
===============================================================================
Coherent Optical Module
===============================================================================
fg Tx Target Power:   1.00 dBm               Present Rx Channel : 24
Cfg Rx LOS Thresh  : -23.00 dBm               Cfg Rx Channel     : 24 (auto)
 
Disp Control Mode  : automatic                Sweep Start Disp   : -25500 ps/nm
Cfg Dispersion     :      0 ps/nm             Sweep End Disp     :   2000 ps/nm
CPR Window Size    : 4 symbols
 
Cfg Alarms         : modflt mod netrx nettx hosttx
Alarm Status       :
Defect Points      :
 
Rx Q Margin        :    10.1 dB                Chromatic Disp     :  1 ps/nm
SNR X Polar        :   19.7 dB                Diff Group Delay   :      0 ps
SNR Y Polar        :   19.8 dB                Pre-FEC BER        : 0.000E+00
 
Module State       : ready
Tx Turn-Up States  : init laserTurnUp laserReadyOff laserReady
                     modulatorConverge outputPowerAdjust
Rx Turn-Up States  : init laserReady waitForInput adcSignal opticalLock
                     demodLock
===============================================================================
 
-------------------------------------------------------------------------------
Coherent Optical Port Statistics (Elapsed Seconds: 80674)
-------------------------------------------------------------------------------
Statistic                        Current      Average      Minimum      Maximum
-------------------------------------------------------------------------------
Rx BER                         0.000E+00    2.323E-05    0.000E+00    4.646E-05
Rx SNR (dB)                         19.6         10.0          0.0         20.1
Rx Chromatic Disp (ps/nm)              1          -18          -37            1
Rx Diff Group Delay (ps)               0            0            0            0
Rx Freq Offset (MHz)                  38          -74         -347          200
Rx Q (dB)                           16.6          8.3          0.0         16.6
Rx Power (dBm)                    -10.44       -13.40       -99.00       -10.39
Tx Power (dBm)                      0.98        -2.00       -99.00         1.01
-------------------------------------------------------------------------------
===============================================================================
 
===============================================================================
Wavelength Tracker
===============================================================================
Port Type          : pluggable                SFP VOA Present    : yes
 
SFP VOA Type       : fast                     
Serial Number      : ALLU11--JS0100456        
Part Number        : 21131722-0101            
 
Power Control      : Enabled                  WaveKey Status     : Disabled
Target Power       : -10.00 dBm               WaveKey 1          : 0
Measured Power     :  -9.99 dBm               WaveKey 2          : 0
 
Cfg Alarms         : enc-fail enc-degr pwr-fail pwr-degr pwr-high pwr-low
                     missing
Alarm Status       : 
 
Maximum Power      :  -2.60 dBm               Power Upper Margin :   7.39 dB
Minimum Power      : -22.00 dBm               Power Lower Margin :  12.01 dB
===============================================================================
Table 72:  Output Fields: show port <port-id> optical detail 

Label

Description  

Transceiver Status

Status of the transceiver.

Transceiver Type

Type of the transceiver.

Model Number

The model number of the transceiver.

Transceiver Code

The code for the transmission media. <Q: is this field still available in any outputs?>

TX Laser Wavelength

Indicates the transceiver laser wavelength.

Present Channel

Specifies the present channel that the transceiver is on.

TX Laser Frequency

Indicates the transceiver laser frequency.

Configured Chann*

Specifies the channel that is configured for the transceiver.

Laser Tunability

Specifies the laser tune-ability of the transceiver.

50GHz Ch Min/Max

Specifies the 50 GHz channel minimum/maximum.

100GHz Ch Min/Max:

Specifies the 100 GHz channel minimum/maximum.

RxDTV Adjust

Specifies the Rx DTV adjust status.

DAC Percent

Specifies the DAC percentage of the transceiver.

Diag Capable

Indicates if the transceiver is capable of doing diagnostics.

Number of Lanes

Specifies the number of lanes of the transceiver.

Connector Code

The vendor organizationally unique identifier field (OUI)

contains the IEEE company identifier for the vendor.

Vendor OUI

Specifies the vendor OUI of the transceiver.

Manufacture date

The manufacturing date of the hardware component in the mmddyyyy ASCII format.

Media

The media supported for the SFP.

Serial Number

The vendor serial number of the hardware component.

Part Number

The vendor part number contains ASCII characters, defining the vendor part number or product name.

Optical Compliance

Specifies the optical compliance code of the transceiver.

Link Length support

Specifies the link length support for the transceiver.

Transceiver Digital Diagnostic Monitoring (DDM)

Displays information for the transceiver Digital Diagnostic Monitoring (DDM), such as temperature and supply voltage.

Transceiver Lane Digital Diagnostic Monitoring (DDM)

Displays information for the transceiver lane DDM, such as lane temperature and Tx bias current.

Coherent Optical Module

Displays information for the coherent optical module.

Coherent Optical Port Statistics

Displays statistics for the coherent optical port.

For Coherent CFP, the Rx Power field displays per-channel power.

Wavelength Tracker

Displays wavelength tracker information.

Sample Output: show port <port-id> vport <vport-name>
*A:Bennet-Dut-A# show port 1/1/2 vport "vp1" 
========================================================================
Ethernet port 1/1/2 Access Egress vport
========================================================================
VPort Name    : vp1                               
Description   : (Not Specified)
Sched Policy  : psp                               
 
Host-Matches
------------------------------------------------------------------------
Dest: dslam1                            
------------------------------------------------------------------------
========================================================================
*A:Bennet-Dut-A# 
 
 
*A:Bennet-Dut-A# show port 1/1/2 vport "vp1" associations 
========================================================================
Ethernet port 1/1/2 Access Egress vport
========================================================================
------------------------------------------------------------------------
VPort "vp1"
------------------------------------------------------------------------
svc-id : 1
 sap   : 1/1/2:1
 subscr: s1
 ip    : 10.1.1.2
 mac   : 00:00:00:00:00:01  pppoe-sid: N/A
========================================================================
*A:Bennet-Dut-A
 
 
*A:Bennet-Dut-A# show port 1/1/1 vport "abc" monitor-threshold 
===============================================================================
Port 1/1/1 Vport "abc" Monitor Threshold Info
===============================================================================
Attribute                            Exceed Count Config Rate   Threshold Prcnt
-------------------------------------------------------------------------------
Agg-Eps                              0            212           32
Lvl-1                                0            12323         89
Lvl-2                                0            32132         32
Lvl-5                                0            2323          4
Grp-01234567890123458746513513355656 0            2121          12
-------------------------------------------------------------------------------
Start Time    : 01/07/2015 16:53:16     End Time      : 01/07/2015 16:53:36
Total Samples : 
===============================================================================
*A:Bennet-Dut-A

Note: If the Vport name is omitted, statistics for all Vports are displayed (bulk read). The statistics are displayed only for the levels, groups, and agg-eps for which the monitor-threshold is enabled. The output information filtering per level, group, or agg-eps is not embedded in the show commands natively. Instead, the output can be filtered with the match extensions for the show command. For example, show port 1/1/1 vport test monitor-threshold | match Lvl-1.

 
*A:sne# show port 1/1/4 vport statistics
===============================================================================
Port 1/1/4 Access Egress vport
===============================================================================
VPort Name    : vp1
Description   : (Not Specified)
Sched Policy  : portschedpol1
Rate Limit    : Max
Rate Modify   : disabled
Modify delta  : 0
Vport Queueing Statistics
 
Last Cleared Time  : N/A
                        Packets                 Octets
Forwarded:              0                       0
Dropped  :              0                       0
-------------------------------------------------------------------------------
Vport per Level Queueing Statistics
                        Packets                 Octets
Level : 8
Forwarded:              0                       0
Dropped  :              0                       0
Level : 7
Forwarded:              0                       0
Dropped  :              0                       0
Level : 6
Forwarded:              0                       0
Dropped  :              0                       0
Level : 5
Forwarded:              0                       0
Dropped  :              0                       0
Level : 4
Forwarded:              0                       0
Dropped  :              0                       0
Level : 3
Forwarded:              0                       0
Dropped  :              0                       0
Level : 2
Forwarded:              0                       0
Dropped  :              0                       0
Level : 1
Forwarded:              0                       0
Dropped  :              0                       0
 
Host-Matches
-------------------------------------------------------------------------------
Dest: dslam1
-------------------------------------------------------------------------------
===============================================================================
*A:sne#
Sample Output: show port <port-id> detail (Excerpt Showing Ethernet Statistics)
A:ALA-48# show port 1/3/1 detail
===============================================================================
...
===============================================================================
Ethernet Statistics
===============================================================================
Broadcast Pckts  :               42621  Drop Events      :                   0
Multicast Pckts  :                   0  CRC/Align Errors :                   0
Undersize Pckts  :                   0  Fragments        :                   0
Oversize Pckts   :                   0  Jabbers          :                   0
Collisions       :                   0
 
Octets                         :             2727744
Packets                        :               42621
Packets of 64 Octets           :               42621
Packets of 65 to 127 Octets    :                   0
Packets of 128 to 255 Octets   :                   0
Packets of 256 to 511 Octets   :                   0
Packets of 512 to 1023 Octets  :                   0
Packets of 1024 to 1518 Octets :                   0
Packets of 1519 or more Octets :                   0
===============================================================================
Port Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Unicast Packets                                        0                      0
Multicast Packets                                      0                      0
Broadcast Packets                                  42621                      0
Discards                                               0                      0
Unknown Proto Discards                                 0
===============================================================================
...
Output Fields: show port <port-id> detail (Excerpt Showing Ethernet Statistics)

Table 73 describes the output fields for the show port detail command (showing the Ethernet Statistics section).

Table 73:  Output Fields: show port <port-id> detail (Excerpt Showing Ethernet Statistics) 

Label

Description  

Broadcast Pckts

The number of packets, delivered by this sub-layer to a higher (sub-) layer, which were addressed to a broadcast address at this sub-layer.

The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent.

For a MAC layer protocol, this includes both Group and Functional addresses.

Drop Events

The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.

Multicast Pckts

The number of packets, delivered by this sub-layer to a higher (sub-) layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses.

CRC/Align Errors

The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).

Undersize Pckts

The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.

Fragments

The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).

Oversize Pckts

The total number of packets received that were longer than can be accepted by the physical layer of that port (9900 octets excluding framing bits, but including FCS octets for GE ports) and were otherwise well formed.

Jabbers

The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).

Collisions

The best estimate of the total number of collisions on this Ethernet segment.

Octets

The total number of octets received.

Packets

The total number of packets received.

Sample Output: show port <port-id> detail (Excerpt Showing Ethernet-like Medium Statistics)
A:ALA-48# show port 1/3/1 detail
===============================================================================
...
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors :                   0  Sngl Collisions  :                   0
FCS Errors       :                   0  Mult Collisions  :                   0
SQE Test Errors  :                   0  Late Collisions  :                   0
CSE              :                   0  Excess Collisns  :                   0
Too long Frames  :                   0  Int MAC Tx Errs  :                   0
Symbol Errors    :                   0  Int MAC Rx Errs  :                   0
===============================================================================
A:ALA-48#
 
A:ALA-48# show port 1/2/1.sts192
============================================================================
WAN Interface Sublayer Path Info
============================================================================
Oper Status        : up
Signal Label       : 0x1a                   Rx Signal Label      : 0x1a
Trace String       : Alcatel 7750 SR
Rx Trace Str(Hex)  : 89 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Cfg Alarm          : pais plop prdi pplm prei puneq plcd
Alarm Status       :
============================================================================
Port Statistics
============================================================================
                                                   Input
Output
----------------------------------------------------------------------------
Unicast Packets                                367218143
5311
Multicast Packets                                      0
0
Broadcast Packets                                      0
0
Discards                                               0
0
Unknown Proto Discards                                 0
============================================================================
A:ALA-48#
 
 
A:ALA-48# show port 1/2/1.sts192 detail
============================================================================
WAN Interface Sublayer Path Info
============================================================================
Oper Status        : up
Signal Label       : 0x1a                   Rx Signal Label      : 0x1a
Trace String       : Alcatel 7750 SR
Rx Trace Str(Hex)  : 89 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Cfg Alarm          : pais plop prdi pplm prei puneq plcd
Alarm Status       :
============================================================================
Sonet Path
============================================================================
                                 Far End
-------------------------------------------
ES-P                   1               0
SES-P                  1               0
UAS-P                  0               0
CV-P                  10               0
============================================================================
============================================================================
Transmit:
LOP-P                  :               0
Fifo Error             :              96
Max Packet Error       :               0
Min Packet Error       :               0
LLP Packet Error       :               0
FIFO Underflow Error   :               0
 
Receive:
 
LOP-P                  :               0
AIS-P                  :               1
RDI-P                  :               0
PLM-P                  :               0
LCD-P                  :               0
Unequipped             :               0
Remote Error           :               6
Parity Error           :              10
Fifo Error             :               0
Max Pkt Error          :               0
Min Pkt Error          :               0
FCS Error              :               0
Packet Abort Error     :               0
Addr Ctrl Invalid      :               0
============================================================================
Port Statistics
============================================================================
Input
Output
----------------------------------------------------------------------------
Unicast Packets                                369758853
5312
Multicast Packets                                      0
0
Broadcast Packets                                      0
0
Discards                                               0
0
Unknown Proto Discards                                 0
============================================================================
A:ALA-48#
Output Fields: show port <port-id> detail (Excerpt Showing Ethernet-like Medium Statistics Output)

Table 74 describes the output fields for the show port detail command (showing the Ethernet-like Medium Statistics section).

Table 74:  Output Fields: show port detail (Excerpt Showing Ethernet-like Medium Statistics) 

Label

Description  

Alignment Errors

The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets.

Sngl Collisions

The number of frames that are involved in a single collision, and are subsequently transmitted successfully.

FCS Errors

The number of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check.

Mult Collisions

The number of frames that are involved in more than one collision and are subsequently transmitted successfully.

SQE Errors

The number of times that the SQE TEST ERROR is received on a particular interface.

Late Collisions

The number of times that a collision is detected on a particular interface later than one slotTime into the transmission of a packet.

CSE

The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface.

Excess Collisns

The number of frames for which transmission on a particular interface fails due to excessive collisions.

Too long Frames

The number of frames received on a particular interface that exceed the maximum permitted frame size.

Int MAC Tx Errs

The number of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error.

Symbol Errors

For an interface operating at 100 Mb/s, the number of times there was an invalid data symbol when a valid carrier was present.

Int MAC Rx Errs

The number of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error.

In Pause Frames

The number of In Pause frames.

Out Pause Frames

The number of Out Pause frames.

Sample Output: show port <port-id> (Showing Channelized Ports)
A:ALA-7# show port 7/1/1.ds0grp-1.1
================================================================================
TDM DS0 Chan Group
================================================================================
Description        : DS3
Interface          : 7/1/1.ds0grp-1.1
TimeSlots          : 1
Speed              : 64                      CRC                  : 16
Admin Status       : up                      Oper status          : down
Last State Change  : 2007/04/11 01:14:37     Chan-Grp IfIndex     : 656441433
 
Configured mode    : access                  Encap Type           : bcp-null
Admin MTU          : 1522                    Oper MTU             : 1522
Physical Link      : No
================================================================================
Port Statistics
=======================================================================
                                         Input                  Output
-----------------------------------------------------------------------
Unicast Packets                              0                       0
Multicast Packets                            0                       0
Broadcast Packets                            0                       0
Discards                                     0                       0
Unknown Proto Discards                       0
=======================================================================
A:ALA-7#
 
 
A:ALA-7# show port 7/1/1.ds0grp-1.1 detail
================================================================================
TDM DS0 Chan Group
================================================================================
Description        : DS3
Interface          : 7/1/1.ds0grp-1.1
TimeSlots          : 1
Speed              : 64                      CRC                  : 16
Admin Status       : up                      Oper status          : down
Last State Change  : 04/11/2007 01:14:37     Chan-Grp IfIndex     : 656441433
 
Configured mode    : access                  Encap Type           : bcp-null
Admin MTU          : 1522                    Oper MTU             : 1522
Physical Link      : No
================================================================================
Port Statistics
=======================================================================
                                         Input                  Output
-----------------------------------------------------------------------
Unicast Packets                              0                       0
Multicast Packets                            0                       0
Broadcast Packets                            0                       0
Discards                                     0                       0
Unknown Proto Discards                       0
=======================================================================
A:ALA-7#
 
 
ALA-12# show port 7/1/1.1.1
===============================================================================
TDM DS0 Chan Group
===============================================================================
Description        : DS0GRP
Interface          : 3/1/1.1.1
TimeSlots          : 1
Speed              : 64                      CRC                  : 16
Admin Status       : up                      Oper status          : down
Last State Change  : 04/11/2007 06:54:28     Chan-Grp IfIndex     : 589332542
 
Configured mode    : access                  Encap Type           : bcp-null
Admin MTU          : 1518                    Oper MTU             : 1518
Physical Link      : No                      Bundle Number        : none
Idle Cycle Flags   : flags                   Load-balance-algo    : default
===============================================================================
Traffic Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                                 0                      0
Packets                                                0                      0
Errors                                                 0                      0
===============================================================================
Port Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Packets                                                0                      0
Discards                                               0                      0
Unknown Proto Discards                                 0
===============================================================================
ALA-12#
 
 
A:ALA-48# show port 3/1/3.e3
===============================================================================
TDM Interface
===============================================================================
Description        : E3
Interface          : 3/1/3.e3
Type               : e3                      Framing              : g751
Admin Status       : up                      Oper status          : down
Physical Link      : No                      Clock Source         : loop-timed
Last State Change  : 04/11/2007 06:54:28     Port IfIndex         : 589398019
 
Configured mode    : access                  Encap Type           : bcp-null
Admin MTU          : 1518                    Oper MTU             : 1518
CRC                : 16                      Channelized          : none
Idle Cycle Flags   : flags                   Loopback             : none
FEAC Loop Respond  : Disabled                In FEAC Loop         : No
BERT Pattern       : none                    BERT Duration        : N/A
Err Insertion Rate : 0                       Last BERT Synched    : 0 Seconds
BERT Status        : idle                    Last BERT Errors     : 0
                                             Last BERT Total Bits : 0
Cfg Alarm          : ais los
Alarm Status       :
Subrate Mode       : none
 
MDL Transmit       : none
-------------------------------------------------------------------------------
Local MDL Information
-------------------------------------------------------------------------------
EIC                :                         LIC                  :
FIC                :                         Unit                 :
PFI                :
Idle Signal Port   :
Test Signal Gen    :
-------------------------------------------------------------------------------
Far End MDL Information
-------------------------------------------------------------------------------
EIC                :                         LIC                  :
FIC                :                         Unit                 :
PFI                :
Idle Signal Port   :
Test Signal Gen    :
===============================================================================
Traffic Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                                 0                      0
Packets                                                0                      0
Errors                                                 0                      0
===============================================================================
Port Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Packets                                                0                      0
Discards                                               0                      0
Unknown Proto Discards                                 0
===============================================================================
A:ALA-48#
Output Fields: show port <port-id> (Showing Channelized Ports)

Table 75 describes the output fields for the show port command for a channelized port.

Table 75:  Output Fields: show port <port-id> (Showing Channelized Ports) 

Label

Description  

Description

A text description of the port.

Interface

The port ID.

TimeSlots

Specifies the DS0 timeslot used in the T1/E1 channel-group.

Speed

Indicates the speed of the DS0 channels used in the associated channel-group.

CRC

Indicates the precision of the cyclic redundancy check.

16 — A 16-bit CRC calculation.

32 — A 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead.

Admin Status

Up — The port is administratively up.

Down — The administratively down.

Oper Status

Up — The port is operationally up.

Down — The port is operationally down.

Last State Change

Displays the last time the operational status of the port changed state.

Chan-Grp IfIndex

Displays the channel group’s interface index number which reflects its initialization sequence.

Configured Mode

network — The port is configured for transport network use.

access — The port is configured for service access. Channelized ports are always access ports.

Encap Type

The type of encapsulation protocol configured on this port's network interface.

bcp-null — Indicates that BCP is used as the NCP control protocol.

dot1q — Indicates that ingress frames carry 802.1Q tags where each tag signifies a different service.

Oper MTU

The negotiated size of the largest packet which can be sent on the channel, specified in octets. For channels that are used to transmit network datagrams, this is the size of the largest network datagram that can be sent.

Physical Link

Indicates whether or not the port has a physical link.

Unicast Packets Input/Output

The number of packets, delivered by this sub-layer to a higher (sub-) layer, which were not addressed to a multicast or broadcast address at this sub-layer.

Sample Output: show port <port-id> associations
A:ALA-1# show port 1/1/6 associations
==============================================================================
Interface Table
==============================================================================
Router/ServiceId                Name                            Encap Val
------------------------------------------------------------------------------
Router: Base                    if1000                          1000
Router: Base                    if2000                          2000
------------------------------------------------------------------------------
Interfaces
==============================================================================
A;ALA-1#
Output Fields: show port <port-id> associations

Table 76 describes the output fields for the show port <port-id> associations command.

Table 76:  Output Fields: show port <port-id> associations  

Label

Description

Svc ID

The service identifier.

Name

The name of the IP interface.

Encap Value

The dot1q or qinq encapsulation value on the port for this IP interface.

Sample Output: show port <port-id> frame-relay
A:ALA-49>config>port# show port 8/1/2 frame-relay
===============================================================================
Frame Relay Info for 8/1/2
===============================================================================
Mode                    : dte           LMI Type                : itu
FR Interface Status     : fault
N391 DTE                : 6             N392 DCE                : 3
N392 DTE                : 3             N393 DCE                : 4
N393 DTE                : 4             T392 DCE                : 15
T391 DTE                : 10
Tx Status Enquiry       : 0             Rx Status Enquiry       : 0
Rx Status Messages      : 0             Tx Status Messages      : 0
Status Message Timeouts : 0             Status Enquiry Timeouts : 0
Discarded Messages      : 0             Inv. RxSeqNum Messages  : 0
===============================================================================
A:ALA-49>config>port#
Output Fields: show port <port-id> frame-relay

Table 77 describes the output fields for the show port <port-id> frame-relay command.

Table 77:  Output Fields: show port <port-id> frame-relay  

Label

Description  

Mode

Displays the mode of the interface. It can be set as Data terminal equipment (dte) or Data circuit-terminating equipment (DCE).

LMI Type

Displays the LMI type.

FR Interface Status

Displays the status of the Frame Relay interface as determined by the performance of the DLCMI. If no DLCMI is running, the Frame Relay interface will stay in the running state indefinitely.

Sample Output: show port <port-id> otu detail
A:ALA-49>config>port# show port 3/2/1 otu detail
===============================================================================
OTU Interface
===============================================================================
OTU Status         : Enabled                    FEC Mode         : enhanced
                                                Data Rate        : 11.049 Gb/s
Cfg Alarms         : loc los lof lom otu-ber-sf otu-bdi fec-sf
Alarm Status       : 
SF/SD Method       : FEC                        SF Threshold     : 1E-5
                                                SD Threshold     : 1E-7
 
SM-TTI Tx (auto)   : ALA-49:3/2/1/C17
SM-TTI Rx          : (Not Specified)
===============================================================================
OTU Statistics
===============================================================================
Statistics                                              Count
-------------------------------------------------------------------------------
FEC Corrected 0s                                                0
FEC Corrected 1s                                                0
FEC Unrrectable Sub-rows                                        0
FEC SES                                                         0
SM BIP8                                                         0
SM BEI                                                          0
SM SES                                                          0
PM BIP8                                                         0
PM BEI                                                          0
PM SES                                                          0
===============================================================================
Output Fields: show port <port-id> otu detail

Table 78 describes the output fields for the show port <port-id> otu detail command.

Table 78:  Output Fields: show port <port-id> otu detail  

Label

Description  

OTU Status

Status of the OTU (Optical Transport Unit): enabled or disabled. When OTU is enabled, and additional layer of framing encapsulates an MDA's natively programmed mode of operation, 10-Gigabit Ethernet LAN or WAN, adding SONET-Like Framing with FEC (Forward Error Correction). When OTU is disabled, the MDA operates in a 10-Gigabit Ethernet LAN or WAN as per Ethernet provisioning.

FEC Mode

Type of FEC (Forward Error Correction) in effect: g709, enhanced or disabled. When g709 is selected, the standard FEC method is used. When enhanced is selected, a proprietary FEC algorithm is used that extends optical reach in long haul applications. When disabled the bytes that are reserved for FEC in the OTU frame are transmitted as zeros and the FEC decoder is bypassed, but OTU framing is still in effect.

Data Rate

This indicates the data rate at which the port is operating. When OTU is encapsulating 10-Gigabit Ethernet WAN, the data rate is 10.709 Gb/s, the G.709 standard OTU2 data rate. When OTU is encapsulating 10-Gigabit Ethernet LAN, the data rate is either 11.049 Gb/s or 11.096 Gb/s, depending on the otu2-lan-data-rate configuration parameter of the port's OTU parameters. These data rates (11.049 Gb/s and 11.096 Gb/s) are considered OTU2e data rates that are non-standard or over-clocked with respect to G.709, but have become widely used in optical networking to transport un-altered 10-Gigabit Ethernet LAN payloads.

Cfg Alarms and Alarm Status

This indicates the alarms that shall be reported when raised or cleared. Alarms that are not in this list will not be reported when they are raised or cleared but will appear in the Alarm Status.

SF/SD Method

This indicates the selected method for declaring the SF (Signal Fail) or SD (Signal Degrade) alarm. When BIP8 is selected, the error rate of SM-BIP8 errors in the OTU frames declares SF or SD (This is very similar to SONET SF/SD which uses a rate of B2 errors). When FEC is selected, the rate of corrected bits declares SF or SD. This effectively indicates that the link would be degraded (SD) or failed (SF) if FEC was disabled and gives the user an early warning that the link is degrading or is about to fail.

SF Threshold

This is the configured error rate threshold at which the SF (Signal Fail) alarm will be raised.

SD Threshold

This is the configured error rate threshold at which the SD (Signal Degrade) alarm will be raised.

SM-TTI Tx (<mode>)

This is the configured SM-TTI (Section Monitor Trail Trace Identifier) to be transmitted by this port in the OTU overhead bytes. The modes are auto, string, or bytes. In the auto and string modes, a printable character string will be displayed. In bytes mode, up to 64 hex bytes will be displayed.

SM-TTI Rx

This is the SM-TTI (Section Monitor Trail Trace Identifier received by this port. When the received TTI is a printable string of characters, it will be displayed as a text string. When the received TTI contains one or more non-printable characters, it will be displayed at a sequence of 64 hex bytes. When the received TTI is all zeros, the string “Not Specified” will be displayed.

FEC Corrected 0s

Displays the number of bits that were received as 0s but corrected to 1s.

FEC Corrected 1s

Number of bits that were received as 1s but corrected to 0s.

FEC Uncorrectable Sub-Rows

The number of sub-rows that were not corrected because too many errors were detected.

FEC SES

The number of severely errored seconds were the number of uncorrectable sub-rows was greater than 15% of the maximum.

SM BIP8

The number of detected BIP-8 errors in the section monitor overhead.

SM BEI

The number of backward error indications received from the far end in the section monitor overhead.

SM SES

Section monitor severely errored seconds where the number of SM-BIP8 was greater than 15% of the maximum.

PM BIP8

The number of detected BIP-8 errors in the path monitor overhead.

PM BEI

The number of backward error indications received from the far end in the path monitor overhead.

PM SES

Section monitor severely errored seconds where the number of PM-BIP8 was greater than 15% of the maximum.

Sample Output: show port <port-id> ppp
A:SR-007# show port 1/1/1.1.1.1.1 ppp
===============================================================================
PPP Protocols for 1/1/1.1.1.1.1
===============================================================================
Protocol  State         Last Change         Restart Count   Last Cleared       
-------------------------------------------------------------------------------
lcp       opened        03/28/2007 13:06:28          7      03/28/2007 12:12:11
ipcp      initial       03/28/2007 11:39:45          0      03/28/2007 12:12:11
mplscp    initial       03/28/2007 11:39:45          0      03/28/2007 12:12:11
bcp       initial       03/28/2007 11:39:45          0      03/28/2007 12:12:11
osicp     opened        03/28/2007 13:06:28         12      03/28/2007 12:12:11
ipv6cp    opened        03/28/2007 13:06:28          7      03/28/2007 12:12:11
===============================================================================
PPP Statistics
===============================================================================
Local Mac address  : 00:03:fa:0e:76:e2  Remote Mac address : 00:00:00:00:00:00 
Local Magic Number : 0x7e9a9            Remote Magic Number: 0x7e18b           
Local IPv4 address : 0.0.0.0            Remote IPv4 address: 0.0.0.0           
Local IPv6 address : FE80::203:FAFF:FE81:5888              
Remote IPv6 address: FE80::203:FAFF:FE1A:7EE2 
Line Monitor Method: keepalive 
Keepalive statistics
Request interval   : 10           Threshold exceeded : 0                       
Drop Count         : 3            In packets         : 332                     
Time to link drop  : 00h00m30s    Out packets        : 332                     
Last cleared time  : 03/28/2007 12:12:11                                       
===============================================================================
A:SR-007# 
 
 
A:SR-007# show port 1/1/3 ppp detail
===============================================================================
PPP Protocols for 1/1/3.sts12
===============================================================================
Protocol  State         Last Change         Restart Count   Last Cleared
-------------------------------------------------------------------------------
lcp       initial       04/11/2007 10:56:11          0      04/11/2007 10:56:11
ipcp      initial       04/11/2007 10:56:11          0      04/11/2007 10:56:11
mplscp    initial       04/11/2007 10:56:11          0      04/11/2007 10:56:11
bcp       initial       04/11/2007 10:56:11          0      04/11/2007 10:56:11
osicp     initial       04/11/2007 10:56:11          0      04/11/2007 10:56:11
===============================================================================
PPP Statistics
===============================================================================
Local IP address   : 0.0.0.0            Remote IP address  : 0.0.0.0
Local Mac address  : 00:00:00:00:00:00  Remote Mac address : 00:00:00:00:00:00
Local Magic Number : 0x0                Remote Magic Number: 0x0
Line Monitor Method: keepalive
Keepalive statistics
Request interval   : 10           Threshold exceeded : 0
Drop Count         : 3            In packets         : 0
Time to link drop  : 00h00m30s    Out packets        : 0
Last cleared time  : 04/11/2007 10:56:11
===============================================================================
A:SR-007# 
 
 
 

The following output displays an example of a PPP link inside a multilink-bundle group:

*A:top_SR7# show port 3/1/4.1.2.3.1 ppp 
===============================================================================
LCP Protocol for 3/1/4.1.2.3.1
===============================================================================
Protocol  State         Last Change         Restart Count   Last Cleared       
-------------------------------------------------------------------------------
lcp       opened        05/22/2008 07:46:18          1      05/22/2008 06:28:48
===============================================================================
Keepalive statistics
 
Request interval   : 4            Threshold exceeded : 0                       
Drop Count         : 3            In packets         : 46404                   
Time to link drop  : 00h00m12s    Out packets        : 46404                   
Last cleared time  : 05/22/2008 06:28:48                                       
 
PPP Header Compression
 ACFC              : Enabled      PFC                : Enabled                 
===============================================================================
*A:top_SR7# 
 
 

The following output displays an example of a standalone PPP link:

*A:top_SR7# show port 3/1/
4.1.2.3.1 ppp                                                 
===============================================================================
PPP Protocols for 3/1/4.1.2.3.1
===============================================================================
Protocol  State         Last Change         Restart Count   Last Cleared       
-------------------------------------------------------------------------------
lcp       initial       05/24/2008 11:25:23          1      05/22/2008 06:28:48
ipcp      initial       05/22/2008 06:28:48          0      05/22/2008 06:28:48
mplscp    initial       05/22/2008 06:28:48          0      05/22/2008 06:28:48
bcp       initial       05/22/2008 06:28:48          0      05/22/2008 06:28:48
osicp     initial       05/22/2008 06:28:48          0      05/22/2008 06:28:48
ipv6cp    initial       05/22/2008 06:28:48          0      05/22/2008 06:28:48
===============================================================================
PPP Statistics
===============================================================================
Local Mac address  : 00:16:4d:8f:d3:57  Remote Mac address :                   
Local Magic Number : 0x0                Remote Magic Number: 0x0               
Local IPv4 address : 0.0.0.0            Remote IPv4 address: 0.0.0.0           
Local IPv6 address : ::                                    
Remote IPv6 address: ::                                    
 
Line Monitor Method: keepalive         
 
Keepalive statistics
 
Request interval   : 4            Threshold exceeded : 0                       
Drop Count         : 3            In packets         : 46418                   
Time to link drop  : 00h00m12s    Out packets        : 46418                   
Last cleared time  : 05/22/2008 06:28:48                                       
 
PPP Header Compression
 ACFC              : Enabled      PFC                : Enabled                 
===============================================================================
*A:top_SR7# 
Output Fields: show port <port-id> ppp

Table 79 describes the output fields for the show port <port-id> ppp command.

Table 79:  Output Fields: show port <port-id> ppp  

Label

Description  

Protocol

Displays the applicable protocols for the specified port.

State

Displays the current status of a PPP link. Values include initial, starting, closed, stopped, closing, stopping, requestSent, ackReceived, ackSent, opened.

Last Change

Displays the last time the PPP link state changed.

Restart Count

Displays the number of times that this Control Protocol has reached the 'open' state.

Last Cleared

Displays the date and time the restart count was set to zero.

Local IP address

Displays the IP address assigned the local end of the PPP link.

Remote IP address

Displays the IP address of the remote end of the PPP link.

Local Mac address

Displays the MAC address assigned the local end of the PPP link.

Remote Mac address

The Ethernet MAC address sent by the remote end of the PPP link.

Local Magic Number

Displays the local magic number to be sent to the peer. The magic number provides a method to detect loopbacks. If the value of the local magic number is the same as the value of remote magic number, then it is possible that the link might be looped back. If the two magic numbers do not match, then the link is not looped back.

Remote Magic Number

Displays the magic number sent by the peer.

If the value of remote magic number is the same as the value of the local magic number, then it is possible that the link might be looped back. If the two magic numbers do not match, then the link is not looped back.

Line Monitor Method

The type of line monitoring packets being sent and received on this PPP link.

Request Interval

The time interval in seconds at which keepalive requests are issued.

Threshold exceeded

Displays the number of times that the drop count was reached.

Drop Count

Displays the number of keepalive or LQR messages that were missed before the line was brought down.

In Packets

Displays the number of echo-reply packets received.

Time to link drop

Displays the time remaining before the link will be declared dropped if a keepalive echo reply packet is not received.

Out packets

Displays the number of echo-request packets sent.

Last cleared time

Displays the time since the last clear.

ACFC

Indicates whether Address and Control Field PPP Header Compression is enabled.

PFC

Indicates whether Protocol Field PPP Header Compression is enabled.

Sample Output: show port <port-id> atm
ALA-1# show port 9/1/2 atm
=============================================================================
ATM Info for 9/1/2
=============================================================================
Cell Mode             : UNI
Configured VCs        : 1                 Max Supported VCs  : 2000
Interface Oper Status : lower layer down  Number OCD Events  : 0
TC Alarm State        : LCD Failure
Last Unknown VPI/VCI  : none
=======================================================================
ATM Bandwidth Info
=======================================================================
                     kbps      %                         kbps      %
-----------------------------------------------------------------------
Ingress CBR        : 0          0%  Egress CBR         : 0          0%
Ingress RT-VBR     : 0          0%  Egress RT-VBR      : 0          0%
Ingress NRT-VBR    : 4000       1%  Egress NRT-VBR     : 0          0%
Ingress UBR        : 0          0%  Egress UBR         : 0          0%
-----------------------------------------------------------------------
Ingress Total      : 4000       1%  Egress Total       : 0          0%
ATM Link Bandwidth : 599041 kbps
Shaped Bandwidth   : 0 kbps
=======================================================================
ALA-1#
 
 
*A:ALA-48# show port 3/2/1 atm detail
=============================================================================
ATM Info for 3/2/1
=============================================================================
Cell Mode             : UNI               Mapping            : Direct
Configured VCs        : 0                 Configured VPs     : 0
Configured VTs        : 0                 Configured IFCs    : 0
Configured minimum VPI: 0
Last Unknown VPI/VCI  : none
=============================================================================
TC Sublayer Information
=============================================================================
TC Alarm State        : LCD Failure       Number OCD Events  : 0
HEC Errors (Dropped)  : 0                 HEC Errors (Fixed) : 0
===============================================================================
ATM Bandwidth Info
===============================================================================
                     kbps      %                             kbps      %
-------------------------------------------------------------------------------
Ingress CBR        : 0          0%      Egress CBR         : 0          0%
Ingress RT-VBR     : 0          0%      Egress RT-VBR      : 0          0%
Ingress NRT-VBR    : 0          0%      Egress NRT-VBR     : 0          0%
Ingress UBR        : 0          0%      Egress UBR         : 0          0%
-------------------------------------------------------------------------------
Ingress Total      : 0          0%      Egress Total       : 0          0%
ATM Link Bandwidth : 599041 kbps
Shaped Bandwidth   : 0 kbps
===============================================================================
ATM Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                                 0                      0
Cells                                                  0                      0
Unknown VPI/VCI Cells                                  0
===============================================================================
AAL-5 Packet Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Packets                                                0                      0
Dropped Packets                                        0                      0
CRC-32 Errors                                          0
===============================================================================
*A:ALA-48#
 
 
B:Dut-D# show port 2/2/1.1.1.1 atm 
=============================================================================
ATM Info for 2/2/1.1.1.1
=============================================================================
Cell Mode             : UNI               Mapping            : Direct        
Configured VCs        : 16                Configured VPs     : 0             
Configured VTs        : 0                 Configured IFCs    : 0             
Configured minimum VPI: 0                                                    
Last Unknown VPI/VCI  : none 
=============================================================================
TC Sublayer Information
=============================================================================
TC Alarm State        : No Alarm          Number OCD Events  : 0             
HEC Errors (Dropped)  : 0                 HEC Errors (Fixed) : 0 
===============================================================================
ATM Bandwidth Info
===============================================================================
                     kbps      %                             kbps      %       
-------------------------------------------------------------------------------
Ingress CBR        : 0          0%      Egress CBR         : 0          0%     
Ingress RT-VBR     : 0          0%      Egress RT-VBR      : 0          0%     
Ingress NRT-VBR    : 0          0%      Egress NRT-VBR     : 0          0%     
Ingress UBR        : 0          0%      Egress UBR         : 0          0%     
-------------------------------------------------------------------------------
Ingress Total      : 0          0%      Egress Total       : 0          0%     
ATM Link Bandwidth : 1920 kbps     
Shaped Bandwidth   : 0 kbps           
===============================================================================
B:Dut-D#
 
 
B:Dut-D# show port 2/2/1.1.1.1 atm detail
=============================================================================
ATM Info for 2/2/1.1.1.1
=============================================================================
Cell Mode             : UNI               Mapping            : Direct        
Configured VCs        : 16                Configured VPs     : 0             
Configured VTs        : 0                 Configured IFCs    : 0             
Configured minimum VPI: 0                                                    
Last Unknown VPI/VCI  : none 
=============================================================================
TC Sublayer Information
=============================================================================
TC Alarm State        : No Alarm          Number OCD Events  : 0             
HEC Errors (Dropped)  : 0                 HEC Errors (Fixed) : 0 
===============================================================================
ATM Bandwidth Info
===============================================================================
                     kbps      %                             kbps      %       
-------------------------------------------------------------------------------
Ingress CBR        : 0          0%      Egress CBR         : 0          0%     
Ingress RT-VBR     : 0          0%      Egress RT-VBR      : 0          0%     
Ingress NRT-VBR    : 0          0%      Egress NRT-VBR     : 0          0%     
Ingress UBR        : 0          0%      Egress UBR         : 0          0%     
-------------------------------------------------------------------------------
Ingress Total      : 0          0%      Egress Total       : 0          0%     
ATM Link Bandwidth : 1920 kbps     
Shaped Bandwidth   : 0 kbps           
===============================================================================
ATM Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                      228425945553           228453511542
Cells                                         4309923501             4310443614
Unknown VPI/VCI Cells                         4294967295                       
===============================================================================
AAL-5 Packet Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Packets                                       4302445396             4302705455
Dropped Packets                                        0                      0
CRC-32 Errors                                          0                       
===============================================================================
A:timetra-sim110#
 
 
B:Dut-D# show port 2/1/1 atm connections
=================================================================
ATM Connections, Port 2/1/1
=================================================================
           Owner  Type     Ing.TD  Egr.TD  Adm  OAM         Opr
-----------------------------------------------------------------
cp.1       SAP    CP       1       1       up               up
10/10      SAP    PVC      1       1       up   up          up
10/11      SAP    PVC      1       1       up   up          up
20/20      SAP    PVC      1       1       up   up          up
=================================================================
B:Dut-D#
Sample Output: show port <port-id> atm cp
A:SR12# show port 3/1/1 atm cp 
=========================================================================
ATM CPs, Port 3/1/1
=========================================================================
CP         Owner  Type     Ing.TD  Egr.TD  Adm  OAM         Opr          
-------------------------------------------------------------------------
5          SAP    CP       1       1                            
9          SAP    CP       1       1                            
=========================================================================
A:SR12#
 
 
A:SR12# show port 3/1/1 atm cp detail 
==========================================================================
ATM CP, Port 3/1/1
==========================================================================
CP         Owner  Type     Ing.TD  Egr.TD  Adm  OAM         Opr           
--------------------------------------------------------------------------
5          SAP    CP       1       1                            
==========================================================================
ATM CP Statistics
==========================================================================
Input                 Output
--------------------------------------------------------------------------
Octets                                      284958830153          15950085
Cells                                         5376581701            300945
Dropped CLP=0 Cells                                   90               200
Dropped Cells (CLP=0+1)                              290                  
Tagged Cells                                         780                  
==========================================================================
==========================================================================
ATM CP, Port 3/1/1
==========================================================================
CP         Owner  Type     Ing.TD  Egr.TD  Adm  OAM         Opr           
--------------------------------------------------------------------------
9          SAP    CP       1       1                            
==========================================================================
ATM CP Statistics
========================================================================= 
Input                 Output
--------------------------------------------------------------------------
Octets                                      284958830153          15950085
Cells                                         5376581701            300945
Dropped CLP=0 Cells                                   90               200
Dropped Cells (CLP=0+1)                              290                  
Tagged Cells                                         780                  
==========================================================================
A:SR12#
 
 
A:SR12# show port 3/1/1 atm cp 9      
==========================================================================
ATM CP
==========================================================================
Port Id            : 3/1/1               CP                 : 9
Owner              : SAP                 Endpoint Type      : CP
Ing. Td Idx        : 1                   Egr. Td Idx        : 1
==========================================================================
A:SR12#
 
 
A:SR12# show port 3/1/1 atm cp 9 detail 
==========================================================================
ATM CP
==========================================================================
Port Id            : 3/1/1               CP                 : 9
Owner              : SAP                 Endpoint Type      : CP
Ing. Td Idx        : 1                   Egr. Td Idx        : 1
==========================================================================
==========================================================================
ATM CP Statistics==
==========================================================================
Input                 Output
--------------------------------------------------------------------------
Octets                                      284958830153          15950085
Cells                                         5376581701            300945
Dropped CLP=0 Cells                                   90               200
Dropped Cells (CLP=0+1)                              290                  
Tagged Cells                                         780                  
==========================================================================
A:SR12#
 
 
B:Dut-D# show connection-profile
===============================================================================
Connection Profile Summary Information
===============================================================================
CP Index  Number of
          Members
-------------------------------------------------------------------------------
1         3
===============================================================================
B:Dut-D# 
 
 
B:Dut-D# show connection-profile 1
===============================================================================
Connection Profile 1 Information
===============================================================================
Description : My Connection Profile
Last Change : 09/11/2010 13:37:32
 
-------------------------------------------------------------------------------
VPI/VCI
-------------------------------------------------------------------------------
10/10
10/11
20/20
===============================================================================
B:Dut-D# 
Output Fields: show port <port-id> atm

Table 80 describes the output fields for the show port <port-id> atm command.

Table 80:  Output Fields: show port <port-id> atm  

Label

Description  

Cell Mode

Displays the cell format (UNI or NNI) that is used on the ATM interface.

Configured VCs

Displays the number of configured VCs.

Max Supported VCs

Indicates the maximum number of ATM VPCs that can be configured on this MDA.

Interface Oper Status

Indicates the status of the ATM interface. If the SONET-PATH layer and TC sublayer are operationally up, the ATM Interface is considered up. If the SONET-PATH layer and/or TC SubLayer is down, the ATM Interface is set to lowerLayerDown.

Number OCD Events

Displays the number of times the Out of Cell Delineation (OCD) events occurred.

TC Alarm State

Displays notifications that are generated when the ATM interface indicates that the TC sublayer is currently in the Loss of Cell Delineation (LCD) defect maintenance state or when the TC sublayer is currently not in the Loss of Cell Delineation (LCD) defect maintenance state.

Last Unknown VPI/VCI

Indicates the last unknown VPI/VCI that was received on this interface.

Ingress CBR

Indicates the total CBR bandwidth consumed on this interface in the ingress direction.

Egress CBR

Indicates the total CBR bandwidth consumed on this interface in the egress direction.

Ingress RT-VBR

Indicates the total real-time variable bit rate (rt-VBR) bandwidth consumed on this interface in the ingress direction.

Egress RT-VBR

Indicates the total real-time variable bit rate (rt-VBR) bandwidth consumed on this interface in the egress direction.

Ingress NRT-VBR

Indicates the total non-real-time variable bit rate (nrt-VBR) bandwidth consumed on this interface in the ingress direction.

Egress NRT-VBR

Indicates the total non-real-time variable bit rate (nrt-VBR) bandwidth consumed on this interface in the egress direction.

Ingress UBR

Indicates the total unspecified bit rate (UBR) bandwidth consumed on this interface in the ingress direction.

Egress UBR

Indicates the total unspecified bit rate (UBR) bandwidth consumed on this interface in the egress direction.

Ingress Total

Indicates the number of valid ATM cells received by the ATM interface including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing.

ATM Link Bandwidth

Indicates the total ATM link bandwidth accepted on this interface.

Shaped Bandwidth

Indicates the total shaped bandwidth consumed on this interface in the egress direction.

HEC Errors (Dropped)

Indicates the number of cells with uncorrectable HEC errors on this interface.

HEC Errors (Fixed)

Indicates the number of fixed HEC errors on this interface.

Sample Output: show port <port-id> atm pvc detail
ALA-1# show port 9/1/2 atm pvc 0/500 detail
==============================================================================
ATM Endpoint
==============================================================================
Port Id            : 9/1/2               VPI/VCI            : 0/500
Admin State        : up                  Oper state         : down
OAM State          : ETE-AIS             Encap Type         : llc
Owner              : SAP                 AAL Type           : AAL-5
Endpoint Type      : PVC                 Cast Type          : P2P
Ing. Td Idx        : 5                   Egr. Td Idx        : 3
Last Changed       : 02/14/2007 14:15:12
==============================================================================
ATM Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                                 0                      0
Cells                                                  0                      0
===============================================================================
AAL-5 Packet Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Packets                                                0                      0
Dropped Packets                                        0                      0
CRC-32 Errors                                          0
Reassembly Timeouts                                    0
Over Sized SDUs                                        0
===============================================================================
ATM OAM Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
AIS                                                    0                      0
RDI                                                    0                      0
Loopback                                               0                      0
CRC-10 Errors                                          0
Other                                                  0
===============================================================================
A:ALA-1#
 
 
A:ALA-228# show port 2/2/1.1.1.1 atm pvc 0/100 detail
==============================================================================
ATM PVC
==============================================================================
Port Id            : 2/2/1.1.1.1         VPI/VCI            : 0/100           
Admin State        : up                  Oper state         : up              
OAM State          : up                  Encap Type         : llc             
Owner              : SAP                 AAL Type           : AAL-5           
Endpoint Type      : PVC                 Cast Type          : P2P             
Ing. Td Idx        : 101                 Egr. Td Idx        : 201             
Last Changed       : 06/15/2007 22:09:11 ILMI Vpi/Vci Range : n/a             
===============================================================================
ATM Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                          57173273               58892699
Cells                                            1078741                1111183
===============================================================================
AAL-5 Packet Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Packets                                           539382                 555603
Dropped Packets                                        0                      0
CRC-32 Errors                                          0                       
Reassembly Timeouts                                    0                       
Over Sized SDUs                                        0                       
===============================================================================
ATM OAM Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
AIS                                                    0                      0
RDI                                                    0                      1
Loopback                                               0                      0
CRC-10 Errors                                          0                       
Other                                                  0                       
===============================================================================
A:ALA-228#
Output Fields: show port <port-id> atm pvc detail

Table 81 describes the output fields for the show port <port-id> atm pvc detail command.

Table 81:  Output Fields: show port <port-id> atm pvc detail  

Label

Description  

Port Id

Configures or displays the port ID.

VPI/VCI

Displays the VPI/VCI values.

Admin State

Displays the administrative state of the interface connection.

Oper State

Indicates the status of the ATM interface.

OAM State

Indicates the OAM operational status of ATM connections.

ETE — indicates end-to-end connection.

AIS — denotes alarm indication signal.

RDI — denotes for remote defect indication.

LOC — indicates the alarm was due to loss of continuity.

Encap Type

Indicates the encapsulation type.

Owner

Identifies the system entity that owns a specific ATM connection.

AAL Type

Displays ATM Adaptation Layer 5 (AAL5) information.

Endpoint Type

Displays the endpoint type.

Cast Type

Indicates the connection topology type.

Type

Indicates the connection type.

Ing. Td Idx

Specifies the ATM traffic descriptor profile that applies to the receive direction of the interface connection.

Egr. Td Idx

Specifies the ATM traffic descriptor profile that applies to the transmit direction of the interface connection.

Last Changed

Indicates the date and time when the interface connection entered its current operational state.

Octets

Displays the number of input and output octets.

HEC discarded cells are not included in the input octet numbers.

Cells

Displays the number of input and output cells.

HEC discarded cells are not included in the input cell numbers.

Packets

Displays the number of input and output packets.

Packets discarded due to HEC or oversize discards are not counted. CRC errors are also in the packet counts show up on the VC level statistics but not on the port level.

Dropped Packets

Displays the number of packets dropped by the ATM SAR device.

CRC-32 Errors

Displays the number of valid AAL-5 SDUs and AAL-5 SDUs with CRC-32 errors received by the AAL-5 VCC.

Reassembly Timeouts

Displays the number of reassembly timeout occurrences.

Over Sized SDUs

Displays the total number of oversized SDU discards.

AIS

Displays the number of AIS cells transmitted and received on this connection for both end to end and segment.

RDI

Displays the number of RDI cells transmitted and received on this connection for both end to end and segment.

Loopback

Displays the number of loopback requests and responses transmitted and received on this connection for both end to end and segment.

CRC-10 Errors

Displays the number of cells discarded on this VPL with CRC 10 errors.

Other

Displays the number of OAM cells that are received but not identified.

Sample Output: show port <port-id> atm pvt detail
A:SR1_5>config>service# show port 1/2/2 atm pvt 0.0 detail
==============================================================================
ATM PVT
==============================================================================
Port Id            : 1/2/2               VPI Range          : 0.0             
Admin State        : up                  Oper state         : up              
Owner              : SAP                                                      
Endpoint Type      : PVT                 Cast Type          : P2P             
Ing. Td Idx        : 1                   Egr. Td Idx        : 1               
Last Changed       : 04/02/2007 01:59:21                                      
==============================================================================
ATM Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                                 0                      0
Cells                                                  0                      0
CLP=0 Cells                                            0                      0
Dropped CLP=0 Cells                                    0                      0
Dropped Cells (CLP=0+1)                                0                       
Tagged Cells                                           0                       
===============================================================================
A:SR1_5>config>service#
Output Fields: show port <port-id> atm pvt detail

Table 82 describes the output fields for the show port <port-id> atm pvt detail command.

Table 82:  Output Fields: show port <port-id> atm pvt detail 

Label

Description  

Port Id

Displays the port ID.

VPI/VCI

Displays the VPI/VCI values.

Admin State

Displays the administrative state of the interface connection.

Oper State

Indicates the status of the ATM interface.

Encap Type

Indicates the encapsulation type.

Owner

Identifies the system entity that owns a specific ATM connection.

Endpoint Type

Displays the endpoint type.

Cast Type

Indicates the connection topology type.

Ing. Td Idx

Specifies the ATM traffic descriptor profile that applies to the receive direction of the interface connection.

Egr. Td Idx

Specifies the ATM traffic descriptor profile that applies to the transmit direction of the interface connection.

Last Changed

Indicates the date and time when the interface connection entered its current operational state.

Octets

Displays the number of input and output octets.

HEC discarded cells are not included in the input octet numbers.

Cells

Displays the number of input and output cells.

HEC discarded cells are not included in the input cell numbers.

Dropped CLP

Displays the number of times the CLP1 cells have been dropped. CLP1 cells have lower priority than CLP0 cells and are expected to be discarded first in times of congestion.

Dropped Cells

Displays the number of cells dropped by the ATM SAR device.

Tagged Cells

Displays the number of cells that have been demoted from CLP0 to CLP1.

Sample Output: show port <port-id> [statistics [egress-aggregate]] [detail]

The output displays the aggregate egress queue statistics for ports configured with monitor-agg-egress-queue-stats which have non-zero counters. This can be shown for a single port, or all ports on an MDA or card. When the detail parameter is added, the output includes those ports with counters that are all zero.

*A:PE# show port 2 statistics egress-aggregate
===============================================================================
Port 2/1/1 Egress Aggregate Statistics on Slot 2
===============================================================================
                        Forwarded                Dropped                  Total
-------------------------------------------------------------------------------
PacketsIn                     292                      0                    292
PacketsOut                      0                      0                      0
OctetsIn                    25013                      0                  25013
OctetsOut                       0                      0                      0
===============================================================================
===============================================================================
Port 2/1/2 Egress Aggregate Statistics on Slot 2
===============================================================================
                        Forwarded                Dropped                  Total
-------------------------------------------------------------------------------
PacketsIn                     136                      0                    136
PacketsOut                      0                      0                      0
OctetsIn                     9320                      0                   9320
OctetsOut                       0                      0                      0
===============================================================================
*A:PE#
*A:PE# show port 2 statistics egress-aggregate detail
===============================================================================
Port 2/1/1 Egress Aggregate Statistics on Slot 2
===============================================================================
                        Forwarded                Dropped                  Total
-------------------------------------------------------------------------------
PacketsIn                     303                      0                    303
PacketsOut                      0                      0                      0
OctetsIn                    25996                      0                  25996
OctetsOut                       0                      0                      0
===============================================================================
===============================================================================
Port 2/1/2 Egress Aggregate Statistics on Slot 2
===============================================================================
                        Forwarded                Dropped                  Total
-------------------------------------------------------------------------------
PacketsIn                     140                      0                    140
PacketsOut                      0                      0                      0
OctetsIn                     9598                      0                   9598
OctetsOut                       0                      0                      0
===============================================================================
===============================================================================
Port 2/1/3 Egress Aggregate Statistics on Slot 2
===============================================================================
                        Forwarded                Dropped                  Total
-------------------------------------------------------------------------------
PacketsIn                       0                      0                      0
PacketsOut                      0                      0                      0
OctetsIn                        0                      0                      0
OctetsOut                       0                      0                      0
===============================================================================
*A:PE#
Sample Output: show port statistics
===============================================================================
Port Statistics on Slot 1
===============================================================================
Port                        Ingress Packets                  Ingress Octets
Id                           Egress Packets                   Egress Octets
-------------------------------------------------------------------------------
1/1/1                                     2                            1510    
                                          2                            1510    
1/1/2                                     2                            1510    
                                          2                            1510    
1/1/3                                     2                            1510    
                                          2                            1510    
1/1/5                                     4                            1648    
                                          3                            1574    
1/2/1                  18446744073709551608            18446744073709551504    
                       18446744073709551608            18446744073709551392    
1/2/2                  18446744073709551608            18446744073709551504    
                       18446744073709551608            18446744073709551392 
Output Fields: show port statistics

Table 83 describes the output fields for the show port statistics command.

Table 83:  Output Fields: show port statistics  

Label

Description  

Ingress Packets

Displays the ingress packets on a per-port basis.

Ingress Octets

Displays the ingress octets on a per-port basis.

Egress Packets

Displays the egress packets on a per-port basis.

Egress Octets

Displays the egress octets on a per-port basis.

Sample Output: show port <port-id> dot1x
A:Dut-C# show port 2/1/11 dot1x 
===============================================================================
802.1x Port Status
===============================================================================
Port control            : force-auth
Port status             : authorized
Authenticator PAE state : force-auth
Backend state           : idle
Reauth enabled          : no           Reauth period         : N/A
Max auth requests       : 2            Transmit period       : 30        
Supplicant timeout      : 30           Server timeout        : 30        
Quiet period            : 60        
Radius-plcy             : N/A
Tunneling               : false
===============================================================================
802.1x Session Statistics
===============================================================================
authentication method   : remote-radius
last session id         : PAC-04258000-6E64D82E
last session time       : 49213d04h
last session username   : N/A
last session term cause : N/A
user tx octets          : 1525626453326
user tx frames          : 329677551
user rx octets          : 1399995911442
user rx frames          : 302536308
===============================================================================
Macsec
===============================================================================
Admin State                  : Up
eapol-destination-address    :                  
Security Zone                : 3
ca-name                      : dut_B_C_256_01
===============================================================================
Output Fields: show port <port-id> dot1x

Table 84 describes the output fields for the following command.

  1. show port <port-id> dot1x
Table 84:  Output Fields: show port <port-id> dot1x 

Label

Description

Port control

Specifies the 802.1x port control: auto, force-auth, force-unauth.

Port status

Specifies the 802.1x port status.

Authenticator PAE state

Specifies the 802.1x port authenticator PAE state.

Backend state

Specifies the 802.1x port backend state.

Reauth enabled

no — The 802.1x port reauth enabled is not up.

yes — The 802.1x port reauth enabled is up.

Reauth period

Specifies the 802.1x port reauthorization period.

Max auth requests

Specifies the 802.1x port maximum authorization requests.

Transmit period

Specifies the 802.1x port transmit period.

Supplicant timeout

Specifies the 802.1x port supplicant timeout.

Server timeout

Specifies the 802.1x port server timeout.

Quiet period

Specifies the 802.1x port quiet period: 1-3600 seconds.

Radius-plcy

Specifies the 802.1x port RADIUS policy name.

Tunneling

true — The 802.1x port tunneling is on.

false — The 802.1x port tunneling is not on.

authentication method

Specifies the 802.1x session authentication method.

last session id

Specifies the 802.1x last session ID.

last session time

Specifies the 802.1x last session time.

last session username

Specifies the 802.1x last session username.

last session term cause

Specifies the 802.1x last session term cause.

user tx octets

Specifies the 802.1x session user Tx octets.

user tx frames

Specifies the 802.1x session user Tx frames.

user rx octets

Specifies the 802.1x session user Rx octets.

user rx frames

Specifies the 802.1x session user Rx frames.

Admin State

Up — The MACsec is administratively up.

Down — The MACsec is administratively down.

If port <x/y/z> ethernet>macsec is shutdown, the admin state will be down. Otherwise, the admin state is up.

eapol-destination-address

Specifies the destination mac address used in the EAPoL packet for MACsec Key Agreement (MKA) PDUs.

Security Zone

Specifies which security zone this port belongs to.

ca-name

Specifies the CA name assigned to this port.

Sample Output: show port esat-n/n/n

The output displays Ethernet satellite port information.

*A:Dut-A# show port esat-1/1/2
 
===============================================================================
Ethernet Interface
===============================================================================
Description        : 10/100/Gig Ethernet SFP
Interface          : esat-1/1/2                 Oper Speed       : 1 Gbps
Link-level         : Ethernet                   Config Speed     : 1 Gbps
Admin State        : up                         Oper Duplex      : full
Oper State         : up                         Config Duplex    : full
Physical Link      : Yes                        MTU              : 1578
Single Fiber Mode  : No                         Min Frame Length : 64 Bytes
IfIndex            : 1140918274                 Hold time up     : 0 seconds
Last State Change  : 06/24/2016 09:33:16        Hold time down   : 0 seconds
Last Cleared Time  : N/A                        DDM Events       : Enabled
Phys State Chng Cnt: 1                         
 
Configured Mode    : access                     Encap Type       : null
Dot1Q Ethertype    : 0x8100                     QinQ Ethertype   : 0x8100
PBB Ethertype      : 0x88e7                    
Ing. Pool % Rate   : 100                        Egr. Pool % Rate : 100
Ing. Pool Policy   : n/a
Egr. Pool Policy   : n/a
Net. Egr. Queue Pol: default                   
Egr. Sched. Pol    : n/a
Monitor Port Sched : Disabled                  
Monitor Agg Q Stats: Disabled                  
Auto-negotiate     : true                       MDI/MDX          : MDI
Oper Phy-tx-clock  : not-applicable            
Accounting Policy  : None                       Collect-stats    : Disabled
Acct Plcy Eth Phys : None                       Collect Eth Phys : Disabled
Egress Rate        : Default                    Ingress Rate     : Default
Load-balance-algo  : Default                    LACP Tunnel      : Disabled
Access Bandwidth   : Not-Applicable             Booking Factor   : 100
Access Available BW: 0                         
Access Booked BW   : 0                         
Sflow              : Disabled                  
 
Down-when-looped   : Disabled                   Keep-alive       : 10
Loop Detected      : False                      Retry            : 120
Use Broadcast Addr : False                     
 
Sync. Status Msg.  : Disabled                   Rx Quality Level : N/A
Tx DUS/DNU         : Disabled                   Tx Quality Level : N/A
SSM Code Type      : sdh
 
Down On Int. Error : Disabled                   DOIE Tx Disable  : N/A
 
CRC Mon SD Thresh  : Disabled                   CRC Mon Window   : 10 seconds
CRC Mon SF Thresh  : Disabled                  
 
EFM OAM            : Disabled                   EFM OAM Link Mon : Disabled
 
Configured Address : a4:7b:2c:c7:3f:d6
Hardware Address   : a4:7b:2c:c7:3f:d6
 
Transceiver Data
 
Transceiver Status : operational
Transceiver Type   : SFP
Model Number       : 3HE00027CAAA01  ALA  IPUIBDKDAA
TX Laser Wavelength: 850 nm                     Diag Capable     : yes
Connector Code     : LC                         Vendor OUI       : 00:90:65
Manufacture date   : 2014/11/30                 Media            : Ethernet
Serial Number      : NSN1ABK        
Part Number        : FTLF8519P3BTL-A5
Optical Compliance : GIGE-SX
Link Length support: 550m for OM2 50u MMF; 300m for OM1 62.5u MMF
 
===============================================================================
Transceiver Digital Diagnostic Monitoring (DDM), Internally Calibrated
===============================================================================
                              Value High Alarm  High Warn   Low Warn  Low Alarm
-------------------------------------------------------------------------------
Temperature (C)               +31.7    +110.0      +93.0      -30.0      -40.0
Supply Voltage (V)             3.25      3.60       3.50       3.10       3.00
Tx Bias Current (mA)            6.2      13.0       12.5        2.0        1.0
Tx Output Power (dBm)         -5.08      0.00      -3.00      -9.50     -13.50
Rx Optical Power (avg dBm)    -5.81      0.50      -1.00     -16.99     -21.02
===============================================================================
===============================================================================
 
===============================================================================
Traffic Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                        1585504864             1585783120
Packets                                          3196585                3197146
Errors                                                 0                      0
 
===============================================================================
Port Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Unicast Packets                                  3196583                3197143
Multicast Packets                                      0                      0
Broadcast Packets                                      2                      3
Discards                                               0                      0
Unknown Proto Discards                                 0
===============================================================================
 
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
 
Alignment Errors :                   0  Sngl Collisions  :                   0
FCS Errors       :                   0  Mult Collisions  :                   0
SQE Test Errors  :                   0  Late Collisions  :                   0
CSE              :                   0  Excess Collisns  :                   0
Too long Frames  :                   0  Int MAC Tx Errs  :                   0
Symbol Errors    :                   0  Int MAC Rx Errs  :                   0
===============================================================================
Sample Output: show port ethernet

The following output is an example of Ethernet information.

A:ALU-1# show port 5/1/4 detail
===============================================================================
Ethernet Interface
===============================================================================
Description        : 10-Gig Ethernet
Interface          : 5/1/4                      Oper Speed       : 10 Gbps
Link-level         : Ethernet                   Config Speed     : N/A
Admin State        : up                         Oper Duplex      : full
Oper State         : down                       Config Duplex    : N/A
Physical Link      : No                         MTU              : 9212
Single Fiber Mode  : No                         Min Frame Length : 64 Bytes
IfIndex            : 170000384                  Hold time up     : 0 seconds
Last State Change  : 04/28/2017 13:09:15        Hold time down   : 0 seconds
Last Cleared Time  : N/A                        DDM Events       : Enabled
Phys State Chng Cnt: 10                         RS-FEC Mode      : None
 
Configured Mode    : network                    Encap Type       : null
Dot1Q Ethertype    : 0x8100                     QinQ Ethertype   : 0x8100
PBB Ethertype      : 0x88e7                     
Ing. Pool % Rate   : 100                        Egr. Pool % Rate : 100
Ing. Pool Policy   : n/a
Egr. Pool Policy   : n/a
Net. Egr. Queue Pol: default                    
Egr. Sched. Pol    : n/a
HS Scheduler Plcy  : default
HS Port Pool Plcy  : default
Monitor Port Sched : Disabled                   
Monitor Agg Q Stats: Disabled                   
Auto-negotiate     : N/A                        MDI/MDX          : N/A
Oper Phy-tx-clock  : not-applicable             
Accounting Policy  : None                       Collect-stats    : Disabled
Acct Plcy Eth Phys : None                       Collect Eth Phys : Disabled
Egress Rate        : Default                    Ingress Rate     : Default
Load-balance-algo  : Default                    LACP Tunnel      : Disabled
Access Bandwidth   : Not-Applicable             Booking Factor   : 100
Access Available BW: 0                          
Access Booked BW   : 0                          
Sflow              : Disabled                   
 
Dampening State    : Active                     Current Penalties: 2297
Suppress Threshold : 1500                       Reuse Threshold  : 1000
Max Penalties      : 4000                       Max Suppress Time: 40 seconds
Half Life          : 20 seconds                 
 
Down-when-looped   : Disabled                   Keep-alive       : 10
Loop Detected      : False                      Retry            : 120
Use Broadcast Addr : False                      
 
Sync. Status Msg.  : Disabled                   Rx Quality Level : N/A
Tx DUS/DNU         : Disabled                   Tx Quality Level : N/A
SSM Code Type      : sdh
 
Down On Int. Error : Disabled                   DOIE Tx Disable  : Disabled
 
CRC Mon SD Thresh  : Disabled                   CRC Mon Window   : 10 seconds
CRC Mon SF Thresh  : Disabled                   
 
Sym Mon SD Thresh  : Disabled                   Sym Mon Window   : 10 seconds
Sym Mon SF Thresh  : Disabled                   Tot Sym Mon Errs : 0
 
EFM OAM            : Disabled                   EFM OAM Link Mon : Disabled
Ignr EFM OAM State : False                      
 
Configured Address : 10:e8:78:4d:24:f0
Hardware Address   : 10:e8:78:4d:24:f0
Cfg Alarm          : remote local
 
Transceiver Data
 
Transceiver Status : operational
Transceiver Type   : SFP
Model Number       : 3HE04823AAAA01  ALA  IPU3ANKEAA
TX Laser Wavelength: 1310 nm                    Diag Capable     : yes
Connector Code     : LC                         Vendor OUI       : 00:90:65
Manufacture date   : 2016/07/23                 Media            : Ethernet
Serial Number      : AW40PC8         
Part Number        : FTLX1471D3BCL-A5
Optical Compliance : 10GBASE-LR 
Link Length support: 10km for SMF
 
===============================================================================
Transceiver Digital Diagnostic Monitoring (DDM), Internally Calibrated
===============================================================================
                              Value High Alarm  High Warn   Low Warn  Low Alarm
-------------------------------------------------------------------------------
Temperature (C)               +38.1     +78.0      +73.0       -8.0      -13.0 
Supply Voltage (V)             3.31      3.70       3.60       3.00       2.90 
Tx Bias Current (mA)           40.3      85.0       80.0       20.0       15.0 
Tx Output Power (dBm)         -1.29      2.00       1.00      -7.00      -8.00 
Rx Optical Power (avg dBm)    -1.38      2.50       2.00     -18.01     -20.00 
===============================================================================
===============================================================================
 
===============================================================================
OTU Interface
===============================================================================
OTU Status         : Disabled                   
===============================================================================
 
===============================================================================
Traffic Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                                 0                      0
Packets                                                0                      0
Errors                                                 0                      0
Utilization (300 seconds)                          0.00%                  0.00%
 
===============================================================================
Ethernet Statistics
===============================================================================
Broadcast Pckts  :                   0  Drop Events      :                   0
Multicast Pckts  :                   0  CRC/Align Errors :                   0
Undersize Pckts  :                   0  Fragments        :                   0
Oversize Pckts   :                   0  Jabbers          :                   0
Collisions       :                   0
Octets                         :                   0
Packets                        :                   0
Packets of 64 Octets           :                   0
Packets of 65 to 127 Octets    :                   0
Packets of 128 to 255 Octets   :                   0
Packets of 256 to 511 Octets   :                   0
Packets of 512 to 1023 Octets  :                   0
Packets of 1024 to 1518 Octets :                   0
Packets of 1519 or more Octets :                   0
===============================================================================
 
===============================================================================
Port Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Unicast Packets                                        0                      0
Multicast Packets                                      0                      0
Broadcast Packets                                      0                      0
Discards                                               0                      0
Unknown Proto Discards                                 0 
===============================================================================
 
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors :                   0  Sngl Collisions  :                   0
FCS Errors       :                   0  Mult Collisions  :                   0
SQE Test Errors  :                   0  Late Collisions  :                   0
CSE              :                   0  Excess Collisns  :                   0
Too long Frames  :                   0  Int MAC Tx Errs  :                   0
Symbol Errors    :                   0  Int MAC Rx Errs  :                   0
In Pause Frames  :                   0  Out Pause Frames :                   0
===============================================================================
 
===============================================================================
Per Threshold MDA Discard Statistics
===============================================================================
                                Packets                 Octets
-------------------------------------------------------------------------------
Threshold 0 Dropped :           0                       0                     
Threshold 1 Dropped :           0                       0                     
Threshold 2 Dropped :           0                       0                     
Threshold 3 Dropped :           0                       0                     
Threshold 4 Dropped :           0                       0                     
Threshold 5 Dropped :           0                       0                     
Threshold 6 Dropped :           0                       0                     
Threshold 7 Dropped :           0                       0                     
Threshold 8 Dropped :           0                       0                     
Threshold 9 Dropped :           0                       0                     
Threshold 10 Dropped :          0                       0                     
Threshold 11 Dropped :          0                       0                     
Threshold 12 Dropped :          0                       0                     
Threshold 13 Dropped :          0                       0                     
Threshold 14 Dropped :          0                       0                     
Threshold 15 Dropped :          0                       0                     
===============================================================================
 
===============================================================================
Ingress Port Forwarding Engine Drop Reason Statistics
===============================================================================
IPv4 Header Error                                      0
IPv4 Invalid Address                                   0
IPv6 Header Error                                      0
IPv6 Invalid Address                                   0
IP Route Blackholed                                    0
ACL Filter Discards                                    0
Unicast RPF Check Failed                               0
BFD Spoof Check Failed                                 0
Unicast MAC Destination Address Mismatch               0
Multicast MAC With Unicast Dest IP                     0
Unknown MAC Destination Address Discarded in VPLS      0
L2 Service MTU Exceeded                                0
Needs ICMP                                             0
===============================================================================
 
===============================================================================
Queue Statistics
===============================================================================
                                                        
-------------------------------------------------------------------------------
Ingress Queue  1             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  2             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  3             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  4             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  5             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  6             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  7             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  8             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue  9             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 10             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 11             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 12             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 13             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 14             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 15             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
Ingress Queue 16             Packets                 Octets
     In Profile forwarded  :    0                       0
     In Profile dropped    :    0                       0
     Out Profile forwarded :    0                       0
     Out Profile dropped   :    0                       0
 
Egress Queue  1              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
Egress Queue  2              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
Egress Queue  3              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
Egress Queue  4              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
Egress Queue  5              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
Egress Queue  6              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
Egress Queue  7              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
Egress Queue  8              Packets                 Octets
     In/Inplus Prof fwded  :    0                       0
     In/Inplus Prof dropped:    0                       0
     Out/Exc Prof fwded    :    0                       0
     Out/Exc Prof dropped  :    0                       0
===============================================================================
Sample Output: show port ethernet efm-oam

The following output is an example of EFM-OAM information.

show port 1/1/1 ethernet efm-oam
===============================================================================
Ethernet Oam (802.3ah)
===============================================================================
Admin State        : down
Oper State         : disabled
Mode               : active
Pdu Size           : 1518
Config Revision    : 0
Function Support   : LB
Transmit Interval  : 1000 ms
Multiplier         : 5
Hold Time          : 0
Tunneling          : false
Loop Detected      : false
Grace Tx Enable    : true (inactive)
Grace Vendor OUI   : 00:16:4d
Dying Gasp on Reset: true (inactive)
Soft Reset Tx Act  : none
Trigger Fault      : none
Vendor OUI         : 00:16:4d (alu)
Vendor Info        : 00:01:00:02
No Peer Information Available
Loopback State     : None
Loopback Ignore Rx : Ignore
Ignore Efm State   : false
Link Monitoring    : disabled
Peer RDI Rx
  Critical Event   : out-of-service
  Dying Gasp       : out-of-service
  Link Fault       : out-of-service
  Event Notify     : log-only
Local SF Action                         Discovery
  Event Burst      : 1                    Ad Link Mon Cap  : yes
  Port Action      : out-of-service
  Dying Gasp       : disabled
  Critical Event   : disabled
Errored Frame                           Errored Frame Period
  Enabled          : no                   Enabled          : no
  Event Notify     : enabled              Event Notify     : enabled
  SF Threshold     : 1                    SF Threshold     : 1
  SD Threshold     : disabled (0)         SD Threshold     : disabled (0)
  Window           : 10 ds                Window           : 1488095 frames
Errored Symbol Period                   Errored Frame Seconds Summary
  Enabled          : no                   Enabled          : no
  Event Notify     : enabled              Event Notify     : enabled
  SF Threshold     : 1                    SF Threshold     : 1
  SD Threshold     : disabled (0)         SD Threshold     : disabled (0)
  Window (time)    : 10 ds                Window           : 600 ds
  Window (symbols) : 125000000
===============================================================================
Active Failure Ethernet OAM Event Logs
===============================================================================
Number of Logs : 0
===============================================================================
 
===============================================================================
Ethernet Oam Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Information                                            0                      0
Loopback Control                                       0                      0
Unique Event Notify                                    0                      0
Duplicate Event Notify                                 0                      0
Unsupported Codes                                      0                      0
Frames Lost                                                                   0
===============================================================================
Sample Output: show port ethernet efm-oam event-logs

The following output is an example of EFM-OAM (Link OAM) event logs.

show port 1/2/1 ethernet efm-oam event-logs
==============================================================================
Active Failure Ethernet OAM Event Logs
===============================================================================
Log Index               : 2
Event Time Reference    : 10d 03:58:24
Location                : remote
Type                    : Dying Gasp
Event Total             : 1
Port Affecting          : yes
-------------------------------------------------------------------------------
Number of Logs : 1
===============================================================================
 
===============================================================================
Active Degraded Ethernet OAM Event Logs
===============================================================================
Number of Logs : 0
===============================================================================
 
===============================================================================
Cleared Failure Ethernet OAM Event Logs
===============================================================================
Number of Logs : 0
===============================================================================
 
===============================================================================
Cleared Degraded Ethernet OAM Event Logs
===============================================================================
Number of Logs : 0
===============================================================================
Sample Output: show port <port-id> ethernet lldp
show port 1/1/1 ethernet lldp
==============================================================================
Link Layer Discovery Protocol (LLDP) Port Information
==============================================================================
 
Port 1/1/1 Bridge nearest-bridge
-------------------------------------------------------------------------------
Admin State           : txAndRx        Notifications         : Disabled
Tunnel Nearest Bridge : Disabled
Transmit TLVs         : portDesc sysName sysDesc sysCap
PortID TLV Subtype    : tx-if-name
 
Management Address Transmit Configuration:
Index 1 (system)      : Enabled        Address               : 10.1.1.31
Index 2 (IPv6 system) : Disabled       Address               : ::
 
Port 1/1/1 Bridge nearest-non-tpmr
-------------------------------------------------------------------------------
Admin State           : disabled       Notifications         : Disabled
Transmit TLVs         : None
PortID TLV Subtype    : tx-local
 
Management Address Transmit Configuration:
Index 1 (system)      : Disabled       Address               : 10.1.1.31
Index 2 (IPv6 system) : Disabled       Address               : ::
 
Port 1/1/1 Bridge nearest-customer
-------------------------------------------------------------------------------
Admin State           : disabled       Notifications         : Disabled
Transmit TLVs         : None
PortID TLV Subtype    : tx-local
 
Management Address Transmit Configuration:
Index 1 (system)      : Disabled       Address               : 10.1.1.31
Index 2 (IPv6 system) : Disabled       Address               : ::
 
==============================================================================  
Sample Output: show port <port-id> ethernet lldp remote-info
show port 1/1/1 ethernet lldp remote-info
==============================================================================
Link Layer Discovery Protocol (LLDP) Port Information
==============================================================================
Port 1/1/1 Bridge nearest-bridge Remote Peer Information
-------------------------------------------------------------------------------
Remote Peer Index 9 at timestamp 12/08/2014 21:34:30:
Supported Caps        : bridge router
Enabled Caps          : bridge router
Chassis Id Subtype    : 4 (macAddress)
Chassis Id            : D8:1C:FF:00:00:00
PortId Subtype        : 5 (interfaceName)
Port Id               : 31:2F:32:2F:32
                        "1/2/2"
Port Description      : n/a
System Name           : cses-V28
System Description    : TiMOS-B-0.0.I4269 both/i386 Nokia 7750 SR Copyright
                        (c) 2000-2016 Nokia.
                        All rights reserved. All use subject to applicable
                        license agreements.
                        Built on Wed Dec 3 19:14:27 PST 2014 by builder in /
                        rel0.0/I4269/panos/main
 
Port 1/1/1 Bridge nearest-non-tpmr Remote Peer Information
-------------------------------------------------------------------------------
No remote peers found
 
Port 1/1/1 Bridge nearest-customer Remote Peer Information
-------------------------------------------------------------------------------
No remote peers found
 
============================================================================== 
Sample Output: show port <port-id> ethernet lldp remote-info detail
show port 1/1/1 ethernet lldp remote-info detail
==============================================================================
Link Layer Discovery Protocol (LLDP) Port Information
==============================================================================
Port 1/1/1 Bridge nearest-bridge Remote Peer Information
-------------------------------------------------------------------------------
Remote Peer Index 9 at timestamp 12/08/2014 21:34:30:
Supported Caps        : bridge router
Enabled Caps          : bridge router
Chassis Id Subtype    : 4 (macAddress)
Chassis Id            : D8:1C:FF:00:00:00
PortId Subtype        : 5 (interfaceName)
Port Id               : 31:2F:32:2F:32
                        "1/2/2"
Port Description      : n/a
System Name           : cses-V28
System Description    : TiMOS-B-0.0.I4269 both/i386 Nokia 7750 SR Copyright
                        (c) 2000-2016 Nokia.
                        All rights reserved. All use subject to applicable
                        license agreements.
                        Built on Wed Dec 3 19:14:27 PST 2014 by builder in /
                        rel0.0/I4269/panos/main
 
Remote Peer Index 9 management addresses at time 12/08/2014 21:34:30:
Address SubType       : 1 (IPv4)
Address               : 10.1.1.28
Address If SubType    : 2              Address If Id         : 1
Address OID           : .1.3.6.1.4.1.6527.1.3.3
 
 
Port 1/1/1 Bridge nearest-non-tpmr Remote Peer Information
-------------------------------------------------------------------------------
No remote peers found
 
Port 1/1/1 Bridge nearest-customer Remote Peer Information
-------------------------------------------------------------------------------
No remote peers found
 
==============================================================================
Sample Output: show port <port-id> ethernet lldp detail
show port 1/1/1 ethernet lldp detail
==============================================================================
Link Layer Discovery Protocol (LLDP) Port Information
==============================================================================
 
Port 1/1/1 Bridge nearest-bridge
-------------------------------------------------------------------------------
Admin State           : txAndRx        Notifications         : Disabled
Tunnel Nearest Bridge : Disabled
Transmit TLVs         : portDesc sysName sysDesc sysCap
PortID TLV Subtype    : tx-if-name
 
Management Address Transmit Configuration:
Index 1 (system)      : Enabled        Address               : 10.1.1.31
Index 2 (IPv6 system) : Disabled       Address               : ::
 
Port LLDP Stats:
Tx Frames             : 11749          Tx Length Err Frames  : 0
Rx Frames             : 70399          Rx Frame Discard      : 0
Rx Frame Errors       : 0              Rx TLV Discard        : 0
Rx TLV Unknown        : 0              Rx Ageouts            : 3
 
 
Port 1/1/1 Bridge nearest-non-tpmr
-------------------------------------------------------------------------------
Admin State           : disabled       Notifications         : Disabled
Transmit TLVs         : None
PortID TLV Subtype    : tx-local
 
Management Address Transmit Configuration:
Index 1 (system)      : Disabled       Address               : 10.1.1.31
Index 2 (IPv6 system) : Disabled       Address               : ::
 
Port LLDP Stats:
Tx Frames             : 0              Tx Length Err Frames  : 0
Rx Frames             : 0              Rx Frame Discard      : 0
Rx Frame Errors       : 0              Rx TLV Discard        : 0
Rx TLV Unknown        : 0              Rx Ageouts            : 0
 
 
Port 1/1/1 Bridge nearest-customer
-------------------------------------------------------------------------------
Admin State           : disabled       Notifications         : Disabled
Transmit TLVs         : None
PortID TLV Subtype    : tx-local
 
Management Address Transmit Configuration:
Index 1 (system)      : Disabled       Address               : 10.1.1.31
Index 2 (IPv6 system) : Disabled       Address               : ::
 
Port LLDP Stats:
Tx Frames             : 0              Tx Length Err Frames  : 0
Rx Frames             : 0              Rx Frame Discard      : 0
Rx Frame Errors       : 0              Rx TLV Discard        : 0
Rx TLV Unknown        : 0              Rx Ageouts            : 0
 
============================================================================== 
Sample Output: show port <port-id> macsec
A:Dut-C#  show port 2/1/11 macsec 
===============================================================================
Port 2/1/11 MACsec
===============================================================================
Admin State                  : Up
eapol-destination-address    :                  
Security Zone                : 3
CA Name                      : dut_B_C_256_01
===============================================================================
===============================================================================
Connectivity Association "dut_B_C_256_01"
===============================================================================
Admin State        : Up
Description        : (Not Specified)
Replay Protection  : Enabled
Replay Window Size : 0
Macsec Encrypt     : Enabled
Clear Tag Mode     : none
Cipher Suite       : gcm-aes-256
Encryption Offset  : 0
Assigned ports     : 2/1/11 
-------------------------------------------------------------------------------
Static Cak
-------------------------------------------------------------------------------
MKA Key Server Priority      : 16
Active Pre-Shared-Key Index  : 1
Active Pre-Shared-Key CKN    : 11223344556677889900aabbccddeeff112233445566778*
===============================================================================
* indicates that the corresponding row element may have been truncated.
Output Fields: show port <port-id> macsec

Table 85 describes the output fields for the show port <port-id> macsec command.

Table 85:  Output Fields: show port <port-id> macsec 

Label

Description

Admin State

Up — The CA is administratively up.

Down — The CA is administratively down.

If port <x/y/z> ethernet>macsec is shutdown, the admin state will be down. Otherwise, the admin state is up.

eapol-destination-address

Specifies the destination mac address used in the EAPoL packet for MACsec Key Agreement (MKA) PDUs.

Security Zone

Specifies which security zone this port belongs to.

ca-name

CA Name

Specifies the CA name.

Description

Specifies a user description for this CA.

Replay Protection

Enabled — Replay Protection is enabled.

Disabled — Replay Protection is disabled.

If replay protection is enabled for this CA, the out of window packet will be discarded.

Replay Window Size

Specifies the size, in packets, of the replay window.

Macsec Encrypt

Enabled — MACsec is enabled.

Disabled — MACsec is disabled.

Clear Tag Mode

Specifies the clear tag mode: single-tag, dual-tag.

Cipher Suite

Specifies the cipher suite used for encrypting the SAK: gcm-aes-128, gcm-aes-256, gcm-aes-xpn-128, gcm-aes-xpn-256.

Encryption Offset

Specifies the encryption offset configured on this node: 0, 30, 50.

Assigned ports

Specifies all ports that contain this CA.

MKA Key Server Priority

Specifies the MKA key server priority: 0-255 (default 16).

Active Pre-Shared Key Index

Specifies the active pre-shared key index: 1-2 (default 1).

Active Pre-Shared Key CKN

Specifies the active PSK CAK name.

Sample Output: show port <port-id> macsec detail
A:Dut-C#  show port 2/1/11 macsec detail     
===============================================================================
Port 2/1/11 MACsec
===============================================================================
Admin State                  : Up
eapol-destination-address    :                  
Security Zone                : 3
CA Name                      : dut_B_C_256_01
===============================================================================
===============================================================================
Connectivity Association "dut_B_C_256_01"
===============================================================================
Admin State        : Up
Description        : (Not Specified)
Replay Protection  : Enabled
Replay Window Size : 0
Macsec Encrypt     : Enabled
Clear Tag Mode     : none
Cipher Suite       : gcm-aes-256
Encryption Offset  : 0
Assigned ports     : 2/1/11 
-------------------------------------------------------------------------------
Static Cak
-------------------------------------------------------------------------------
MKA Key Server Priority      : 16
Active Pre-Shared-Key Index  : 1
Active Pre-Shared-Key CKN    : 11223344556677889900aabbccddeeff112233445566778*
===============================================================================
* indicates that the corresponding row element may have been truncated.
Sample Output: show port <port-id> macsec statistics
A:Dut-C#  show port 2/1/11 macsec statistics 
===============================================================================
MACsec Statistics
===============================================================================
-------------------------------------------------------------------------------
txSecyStats
-------------------------------------------------------------------------------
    Untagged Packets                   : 0
    Too Long Packets                   : 0
-------------------------------------------------------------------------------
rxSecyStats
-------------------------------------------------------------------------------
    No Tag Packets                     : 758
    Bad Tag Packets                    : 0
    No SCI Packets                     : 0
    Overrun Packets                    : 0
-------------------------------------------------------------------------------
txSCSecyStats
-------------------------------------------------------------------------------
    Protected Packets                  : 0
    Encrypted Packets                  : 355170025
    Protected Octets                   : 0
    Encrypted Octets                   : 1637917300250
-------------------------------------------------------------------------------
rxSCSecyStats
-------------------------------------------------------------------------------
SCI : 00:00:a4:7b:2c:e1
    No Using SA Packets                : 0
    Late Packets                       : 0
    Not Valid Packets                  : 0
    Delayed Packets                    : 0
    Unchecked Packets                  : 0
    OK Packets                         : 325904694
    Validated Octets                   : 0
    Decrypted Octets                   : 1502922287478
-------------------------------------------------------------------------------
txSASecyStats
-------------------------------------------------------------------------------
    AN : 0
        Protected SA Packets           : 0
        Encrypted SA Packets           : 355170201
-------------------------------------------------------------------------------
rxSASecyStats
-------------------------------------------------------------------------------
SCI : 00:00:a4:7b:2c:e1
    AN : 0
        No Using SA Packets            : 0
        Not Valid Packets              : 0
        OK Packets                     : 325904947
===============================================================================
Output Fields: show port <port-id> macsec statistics

Table 86 describes the output fields for the following command.

  1. show port <port-id> macsec statistics
Table 86:  Output Fields: show port <port-id> macsec statistics 

Label

Description

Untagged Packets

Indicates the number of transmitted packets without the MAC security tag (SecTAG) when the value oftmnxMacsecConnAssocReplayProtect for the configured CA is set to 'false'.

Too Long Packets

Indicates the number of transmitted packets discarded because the packet length is greater than the Maximum Transmission Unit (MTU) of the Ethernet physical interface.

No Tag Packets

Indicates the number of received packets discarded without the MAC security tag (SecTAG).

Bad Tag Packets

Indicates the number of received packets discarded with an invalid SecTAG or a zero value Packet Number (PN) or an invalid Integrity Check Value (ICV).

No SCI Packets

Indicates the number of received packets discarded with unknown SCI information when the C bit in the SecTAG is set.

Overrun Packets

Indicates the number of packets discarded because the number of received packets exceeded the cryptographic performance capabilities.

Protected Packets

Indicates the number of packets that are integrity protected but not encrypted for this transmitting SA.

Encrypted Packets

Indicates the number of packets that are integrity protected and encrypted for this transmitting SA.

Protected Octets

Indicates the number of plain text octets that are integrity protected but not encrypted on the transmitting SC.

Encrypted Octets

Indicates the number of plain text octets that are integrity protected and encrypted on the transmitting SC.

SCI

Indicates the Secure Channel Identifier (SCI).

No Using SA Packets

Indicates the number of received packets that have been discarded on this SA which is not currently in use.

Late Packets

Indicates the number of received packets that have been discarded due to replay window protection on this SC.

Not Valid Packets

Indicates the number of not valid packets that have been discarded on this active SA.

Delayed Packets

Indicates the number of received packets with the condition a PN lower than the lower bound of the replay protection on this SC.

Unchecked Packets

Indicates the number of packets that have failed the integrity check on this SC.

OK Packets

Indicates the number of validated packets on this SA.

Validated Octets

Indicates the number of octets of plain text recovered from received packets that were integrity protected but not encrypted.

Decrypted Octets

Indicates the number of octets of plain text recovered from received packets that were integrity protected and encrypted.

AN

Indicates the AN for identifying the receiving SA.

Protected SA Packets

Indicates the number of packets that are integrity protected but not encrypted for this SA.

Encrypted SA Packets

Indicates the number of packets that are integrity protected and encrypted for this SA.

port-tree

Syntax 
port-tree port-id
Context 
show
Description 

This command displays the tree for SONET/SDH or TDM ports/channels WAN PHY mode (xgig wan) Ethernet ports.

Parameters 
port-id—
Specifies the physical port ID.
Values—
slot/mda/port [.channel]
Table 87:  Port ID Values 

Product

Slot

MDA

CMA

Port

Values

7750 SR-12

1 to 10

1, 2

1 to 60

(depending on the MDA type)

7750 SR-c12

1

1, 3, 5, 7, 9, 11

1 to 12

7750 SR-c4

1

1, 3

1 to 4

7750 SR-7

1 to 5

1, 2

7950 XRS

1 to 20

7450 ESS-7

1 to 4

7450 ESS-12

1 to 10

Channelized MDAs

CHOC12-SFP

slot/mda/port. [1 to 4] . [1 to 3] . [1 to 28] . [..24]

For example, 7/2/1.1.1.28.24

CHOC3-SFP

slot/mda/port. [1 to 3] . [1 to 28] . [..24]

For example, 7/2/1.1.28.24

DS3

slot/mda/port. [1 to 28] . [..24]

For example, 7/1/1.1.1

 

Output 

The following output is an example of port information, and Table 88 describes the output fields.

Sample Output: show port-tree <port-id>
A:ALA-48>config# show port-tree 7/1/1
    ifIndex  type, sonet-sdh-index (* = provisioned)
===========  =======================================
  119570432  Port, N/A *
  656441345      DS3, none *
  656441405          DS1, 1 *
  656441430          DS1, 2
  656441455          DS1, 3
  656441480          DS1, 4
  656441505          DS1, 5
  656441530          DS1, 6
  656441555          DS1, 7
  656441580          DS1, 8
  656441605          DS1, 9
  656441630          DS1, 10
  656441655          DS1, 11
  656441680          DS1, 12
  656441705          DS1, 13
  656441730          DS1, 14
  656441755          DS1, 15
  656441780          DS1, 16
  656441805          DS1, 17
  656441830          DS1, 18
  656441855          DS1, 19
  656441880          DS1, 20
  656441905          DS1, 21
  656441930          DS1, 22
  656441980          DS1, 24
  656442005          DS1, 25
  656442030          DS1, 26
  656442055          DS1, 27
  656442080          DS1, 28
A:ALA-48>config#
Table 88:  Output Fields: show port-tree <port-id> 

Label

Description  

IfIndex

Displays the interface index number which reflects its initialization sequence.

type

Specifies the type.

sonet-sdh-index

Specifies the sonet-sdh-index.

*

When an asterisk (*) is displayed after the sonet-sdh-index, the port/channel is provisioned.

redundancy

Syntax 
redundancy
Context 
show
Description 

This command enables the context to show multi-chassis redundancy information.

multi-chassis

Syntax 
multi-chassis
Context 
show>redundancy
Description 

This command displays multi-chassis redundancy information.

Output 
Sample Output: show redundancy multi-chassis mc-lag peer <ip-address>
*A:Dut-C# show redundancy multi-chassis mc-lag peer 10.10.10.1 
===============================================================================
Multi-Chassis MC-Lag Peer 10.10.10.1
===============================================================================
Last State chg: 09/24/2007 07:58:03       
Admin State: Up      Oper State   : Up        
KeepAlive: 10 deci-seconds     Hold On Ngbr Failure : 3       
-------------------------------------------------------------------------------
Lag Id Lacp Key Remote Lag Id System Id  Sys Prio Last State Changed 
-------------------------------------------------------------------------------
1      326661      00:00:00:33:33:33  32888  09/24/2007 07:56:35
-------------------------------------------------------------------------------
Number of LAGs : 1
===============================================================================
*A:Dut-C#
Sample Output: show redundancy multi-chassis mc-lag statistics
A:pc1# show redundancy multi-chassis mc-lag statistics 
===============================================================================
Multi-Chassis Statistics
===============================================================================
Packets Rx                        : 129816                                     
Packets Rx Keepalive              : 129798                                     
Packets Rx Config                 : 3                                          
Packets Rx Peer Config            : 5                                          
Packets Rx State                  : 10                                         
Packets Dropped KeepaliveTask     : 0                                          
Packets Dropped Packet Too Short  : 0                                          
Packets Dropped Verify Failed     : 0                                          
Packets Dropped Tlv Invalid Size  : 0                                          
Packets Dropped Out of Seq        : 0                                          
Packets Dropped Unknown Tlv       : 0                                          
Packets Dropped Tlv Invalid LagId : 0                                          
Packets Dropped MD5               : 0                                          
Packets Dropped Unknown Peer      : 0                                          
Packets Tx                        : 77918                                      
Packets Tx Keepalive              : 77879                                      
Packets Tx Config                 : 6                                          
Packets Tx Peer Config            : 26                                         
Packets Tx State                  : 7                                          
Packets Tx Failed                 : 0                                          
===============================================================================
A:pc1#
Sample Output: show redundancy multi-chassis mc-lag peer <ip-address> lag 2 statistics
A:pc1# show redundancy multi-chassis mc-lag peer 10.10.10.102 lag 2 statistics 
===============================================================================
Multi-Chassis Statistics, Peer 10.10.10.102 Lag 2
===============================================================================
Packets Rx Config                 : 1                                          
Packets Rx State                  : 4                                          
Packets Tx Config                 : 2                                          
Packets Tx State                  : 3                                          
Packets Tx Failed                 : 0                                          
===============================================================================
A:pc1#
Sample Output: show redundancy multi-chassis mc-lag peer 10.10.10.102 statistics
A:pc1#show redundancy multi-chassis mc-lag peer 10.10.10.102 statistics 
===============================================================================
Multi-Chassis Statistics, Peer 10.10.10.102
===============================================================================
Packets Rx                        : 129918                                     
Packets Rx Keepalive              : 129900                                     
Packets Rx Config                 : 3                                          
Packets Rx Peer Config            : 5                                          
Packets Rx State                  : 10                                         
Packets Dropped State Disabled    : 0                                          
Packets Dropped Packets Too Short : 0                                          
Packets Dropped Tlv Invalid Size  : 0                                          
Packets Dropped Tlv Invalid LagId : 0                                          
Packets Dropped Out of Seq        : 0                                          
Packets Dropped Unknown Tlv       : 0                                          
Packets Dropped MD5               : 0                                          
Packets Tx                        : 77979                                      
Packets Tx Keepalive              : 77940                                      
Packets Tx Peer Config            : 26                                         
Packets Tx Failed                 : 0                                          
===============================================================================
A:pc1#
Sample Output: show redundancy multi-chassis sync
A:pc1# show redundancy multi-chassis sync 
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address         : 10.10.10.102                                         
Description             : CO1
Authentication          : Enabled                                              
Source IP Address       : 10.10.10.101                                         
Admin State             : Enabled                                              
-------------------------------------------------------------------------------
Sync-status
-------------------------------------------------------------------------------
Client Applications     :                                                      
Sync Admin State        : Up                                                   
Sync Oper State         : Up                                                   
DB Sync State           : inSync                                               
Num Entries             : 0                                                    
Lcl Deleted Entries     : 0                                                    
Alarm Entries           : 0                                                    
Rem Num Entries         : 0                                                    
Rem Lcl Deleted Entries : 0                                                    
Rem Alarm Entries       : 0                                                    
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address         : 10.10.20.1                                           
Authentication          : Disabled                                             
Source IP Address       : 0.0.0.0                                              
Admin State             : Disabled                                             
===============================================================================
A:pc1#
Sample Output: show redundancy multi-chassis sync peer <ip-address>
pc1# show redundancy multi-chassis sync peer 10.10.10.102 
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address         : 10.10.10.102                                         
Description             : CO1
Authentication          : Enabled                                              
Source IP Address       : 10.10.10.101                                         
Admin State             : Enabled                                              
-------------------------------------------------------------------------------
Sync-status
-------------------------------------------------------------------------------
Client Applications     :                                                      
Sync Admin State        : Up                                                   
Sync Oper State         : Up                                                   
DB Sync State           : inSync                                               
Num Entries             : 0                                                    
Lcl Deleted Entries     : 0                                                    
Alarm Entries           : 0                                                    
Rem Num Entries         : 0                                                    
Rem Lcl Deleted Entries : 0                                                    
Rem Alarm Entries       : 0 
===============================================================================
MCS Application Stats
===============================================================================
Application             : igmp                                                 
Num Entries             : 0                                                    
Lcl Deleted Entries     : 0                                                    
Alarm Entries           : 0                                                    
-------------------------------------------------------------------------------
Rem Num Entries         : 0                                                    
Rem Lcl Deleted Entries : 0                                                    
Rem Alarm Entries       : 0                                                    
-------------------------------------------------------------------------------
Application             : igmpSnooping                                         
Num Entries             : 0                                                    
Lcl Deleted Entries     : 0                                                    
Alarm Entries           : 0                                                    
-------------------------------------------------------------------------------
Rem Num Entries         : 0                                                    
Rem Lcl Deleted Entries : 0                                                    
Rem Alarm Entries       : 0                                                    
-------------------------------------------------------------------------------
Application             : subMgmt                                              
Num Entries             : 0                                                    
Lcl Deleted Entries     : 0                                                    
Alarm Entries           : 0                                                    
-------------------------------------------------------------------------------
Rem Num Entries         : 0                                                    
Rem Lcl Deleted Entries : 0                                                    
Rem Alarm Entries       : 0                                                    
-------------------------------------------------------------------------------
Application             : srrp                                                 
Num Entries             : 0                                                    
Lcl Deleted Entries     : 0                                                    
Alarm Entries           : 0                                                    
-------------------------------------------------------------------------------
Rem Num Entries         : 0                                                    
Rem Lcl Deleted Entries : 0                                                    
Rem Alarm Entries       : 0                                                    
===============================================================================
A:pc1#
Sample Output: show redundancy multi-chassis sync peer <ip-address> detail
A:pc1# show redundancy multi-chassis sync peer 10.10.10.102 detail 
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address         : 10.10.10.102                                         
Description             : CO1
Authentication          : Enabled                                              
Source IP Address       : 10.10.10.101                                         
Admin State             : Enabled                                              
-------------------------------------------------------------------------------
Sync-status
-------------------------------------------------------------------------------
Client Applications     :                                                      
Sync Admin State        : Up                                                   
Sync Oper State         : Up                                                   
DB Sync State           : inSync                                               
Num Entries             : 0                                                    
Lcl Deleted Entries     : 0                                                    
Alarm Entries           : 0                                                    
Rem Num Entries         : 0                                                    
Rem Lcl Deleted Entries : 0                                                    
Rem Alarm Entries       : 0 
===============================================================================
MCS Application Stats
===============================================================================
Application             : igmp                                                 
Num Entries             : 0                                                    
Lcl Deleted Entries     : 0                                                    
Alarm Entries           : 0                                                    
-------------------------------------------------------------------------------
Rem Num Entries         : 0                                                    
Rem Lcl Deleted Entries : 0                                                    
Rem Alarm Entries       : 0                                                    
-------------------------------------------------------------------------------
Application             : igmpSnooping                                         
Num Entries             : 0                                                    
Lcl Deleted Entries     : 0                                                    
Alarm Entries           : 0                                                    
-------------------------------------------------------------------------------
Rem Num Entries         : 0                                                    
Rem Lcl Deleted Entries : 0                                                    
Rem Alarm Entries       : 0                                                    
-------------------------------------------------------------------------------
Application             : subMgmt                                              
Num Entries             : 0                                                    
Lcl Deleted Entries     : 0                                                    
Alarm Entries           : 0                                                    
-------------------------------------------------------------------------------
Rem Num Entries         : 0                                                    
Rem Lcl Deleted Entries : 0                                                    
Rem Alarm Entries       : 0                                                    
-------------------------------------------------------------------------------
Application             : srrp                                                 
Num Entries             : 0                                                    
Lcl Deleted Entries     : 0                                                    
Alarm Entries           : 0                                                    
-------------------------------------------------------------------------------
Rem Num Entries         : 0                                                    
Rem Lcl Deleted Entries : 0                                                    
Rem Alarm Entries       : 0                                                    
===============================================================================
Ports synced on peer 10.10.10.102
===============================================================================
Port/Encap                    Tag                                              
-------------------------------------------------------------------------------
1/1/1                                                                          
  1-2                         r1                                               
===============================================================================
A:pc1#
Sample Output: show redundancy multi-chassis sync statistics
A:pc1# show redundancy multi-chassis sync statistics 
===============================================================================
Multi-chassis Peer Sync Stats
===============================================================================
Peer IP Address         : 10.10.10.102                                         
Packets Tx Total        : 511                                                  
Packets Tx Hello        : 510                                                  
Packets Tx Data         : 0                                                    
Packets Tx Other        : 1                                                    
Packets Tx Error        : 0                                                    
Packets Rx Total        : 511                                                  
Packets Rx Hello        : 510                                                  
Packets Rx Data         : 0                                                    
Packets Rx Other        : 1                                                    
Packets Rx Error        : 0                                                    
Packets Rx Header Err   : 0                                                    
Packets Rx Body Err     : 0                                                    
Packets Rx Seq Num Err  : 0                                                    
===============================================================================
Peer IP Address         : 10.10.20.1                                           
Packets Tx Total        : 0                                                    
Packets Tx Hello        : 0                                                    
Packets Tx Data         : 0                                                    
Packets Tx Other        : 0                                                    
Packets Tx Error        : 0                                                    
Packets Rx Total        : 0                                                    
Packets Rx Hello        : 0                                                    
Packets Rx Data         : 0                                                    
Packets Rx Other        : 0                                                    
Packets Rx Error        : 0                                                    
Packets Rx Header Err   : 0                                                    
Packets Rx Body Err     : 0                                                    
Packets Rx Seq Num Err  : 0                                                    
===============================================================================
A:pc1#
Sample Output: show redundancy multi-chassis sync peer <ip-address> statistics
A:pc1# show redundancy multi-chassis sync peer 10.10.10.102 statistics 
===============================================================================
Multi-chassis Peer Sync Stats
===============================================================================
Peer IP Address         : 10.10.10.102                                         
Packets Tx Total        : 554                                                  
Packets Tx Hello        : 553                                                  
Packets Tx Data         : 0                                                    
Packets Tx Other        : 1                                                    
Packets Tx Error        : 0                                                    
Packets Rx Total        : 554                                                  
Packets Rx Hello        : 553                                                  
Packets Rx Data         : 0                                                    
Packets Rx Other        : 1                                                    
Packets Rx Error        : 0                                                    
Packets Rx Header Err   : 0                                                    
Packets Rx Body Err     : 0                                                    
Packets Rx Seq Num Err  : 0 
===============================================================================
A:pc1#

all

Syntax 
all
Context 
show>redundancy>multi-chassis
Description 

This command displays all multi-chassis information.

Output 

The following output is an example of multi-chassis all command information.

Sample Output: show redundancy multi-chassis all
A:pc1# show redundancy multi-chassis all 
===============================================================================
Multi-Chassis Peers
===============================================================================
Peer IP         Src IP          Auth            Peer Admin                     
  MCS Admin       MCS Oper        MCS State       MC-LAG Admin    MC-LAG Oper  
-------------------------------------------------------------------------------
10.10.10.102    10.10.10.101    hash            Enabled                        
  Enabled         Enabled         inSync          Enabled         Enabled      
10.10.20.1      0.0.0.0         None            Disabled                       
  --              --              --              Disabled        Disabled     
===============================================================================
A:pc1#

mc-lag

Syntax 
mac-lag peer ip-address [lag lag-id]
mac-lag [peer ip-address [lag lag-id]] statistics
Context 
show>redundancy>multi-chassis
Description 

This command displays multi-chassis LAG information.

Parameters 
ip-address—
Specifies the IP address.
Values—
ipv4-address: a.b.c.d
ipv6-address:
  1. x:x:x:x:x:x:x:x (eight 16-bit pieces)
  2. x:x:x:x:x:x:d.d.d.d
  3. x: [0 to FFFF] H
  4. d: [0 to 255] D

 

lag-id—
Specifies the LAG ID.
Values—
1 to 800

 

statistics—
Displays statistics.
Output 

The following output is an example of multi-chassis LAG information.

Sample Output: show redundancy multi-chassis mc-lag peer <ip-address>
*A:Dut-B# show redundancy multi-chassis mc-lag peer 10.20.1.2 
===============================================================================
Multi-Chassis MC-Lag Peer 10.20.1.2
===============================================================================
Last State chg : 05/17/2009 19:31:58
Admin State : Up Oper State : Up
KeepAlive : 5 deci-seconds Hold On Ngbr Failure : 2
-------------------------------------------------------------------------------
Lag Id Lacp Remote Source Oper System Id Sys Last State Changed
Key Lag Id MacLSB MacLSB Prio
-------------------------------------------------------------------------------
1 40000 1 Lacp 9c:40 00:02:80:01:00:01 100 05/17/2009 19:31:56
 
*A:Dut-B# /tools dump redundancy src-bmac-lsb
Src-bmac-lsb: 1025 (04-01) User: B-Vpls - 1 service(s)
Services affected:
B-Vpls: 1
B-Vpls: 2

mc-ring

Syntax 
mc-ring peer ip-address statistics
mc-ring peer ip-address [ring sync-tag [detail | statistics] ]
mc-ring peer ip-address ring sync-tag ring-node [ring-node-name [detail | statistics] ]
mc-ring global-statistics
Context 
show>redundancy>multi-chassis
Description 

This command displays multi-chassis ring information.

Parameters 
ip-address—
Specifies the address of the multi-chassis peer to display.
Values—
ipv4-address: a.b.c.d
ipv6-address:
  1. x:x:x:x:x:x:x:x (eight 16-bit pieces)
  2. x:x:x:x:x:x:d.d.d.d
  3. x: [0 to FFFF] H
  4. d: [0 to 255] D

 

sync-tag
Specifies a synchronization tag to be displayed that was used while synchronizing this port with the multi-chassis peer up to 32 characters.
ring-node-name
Specifies a ring-node name up to 32 characters.
global-statistics—
Displays global statistics for the multi-chassis ring.
detail—
Displays detailed peer information for the multi-chassis ring.
Output 
Sample Output: show redundancy multi-chassis mc-ring peer <ip-address> ring <sync-tag> detail
*A:ALA-48# show redundancy multi-chassis mc-ring peer 10.0.0.2 ring ring11 detail
==============================================================================
Multi-Chassis MC-Ring Detailed Information
==============================================================================
Peer           : 10.0.0.2
Sync Tag       : ring11
Port ID        : 1/1/3
Admin State    : inService
Oper State     : connected
Admin Change   : 01/07/2008 21:40:07
Oper Change    : 01/07/2008 21:40:24
Last Debounce  : 02/15/2008 09:28:42
Debounce Period: 0d 00:00:00
Failure Reason : None
------------------------------------------------------------------------------
In Band Control Path
------------------------------------------------------------------------------
Service ID     : 10
Interface Name : to_an1
Oper State     : connected
Dest IP        : 10.10.0.2
Src  IP        : 10.10.0.1
------------------------------------------------------------------------------
VLAN Map B Path Provisioned
------------------------------------------------------------------------------
range 13-13
range 17-17
------------------------------------------------------------------------------
VLAN Map Excluded Path Provisioned
------------------------------------------------------------------------------
range 18-18
------------------------------------------------------------------------------
VLAN Map B Path Operational
------------------------------------------------------------------------------
range 13-13
range 17-17
------------------------------------------------------------------------------
VLAN Map Excluded Path Operational
------------------------------------------------------------------------------
range 18-18
==============================================================================
*A:ALA-48# 
 
 
*A:ALA-48>show>redundancy>multi-chassis# mc-ring peer 192.168.10.104
==============================================================================
MC Ring entries
==============================================================================
Sync Tag                         Oper State      Failure Reason
------------------------------------------------------------------------------
No. of MC Ring entries: 0
==============================================================================
*A:ALA-48# 
 
 
*A:ALA-48# show redundancy multi-chassis mc-ring peer 10.0.0.2
=============================================================================
MC Ring entries
==============================================================================
Sync Tag                         Oper State      Failure Reason
------------------------------------------------------------------------------
ring11                           connected       None
ring12                           shutdown        None
------------------------------------------------------------------------------
No. of MC Ring entries: 4
==============================================================================
*A:ALA-48# 
 
 
*A:ALA-48# show redundancy multi-chassis mc-ring peer 10.0.0.2 ring ring11 ring-
node an1 detail
==============================================================================
Multi-Chassis MC-Ring Node Detailed Information
==============================================================================
Peer           : 10.0.0.2
Sync Tag       : ring11
Node Name      : an1
Oper State Loc : connected
Oper State Rem : notTested
In Use         : True
Admin Change   : 01/07/2008 21:40:07
Oper Change    : 01/07/2008 21:40:25
Failure Reason : None
------------------------------------------------------------------------------
Ring Node Connectivity Verification
------------------------------------------------------------------------------
Admin State    : inService
Service ID     : 11
VLAN Tag       : 11
Dest IP        : 10.11.3.1
Src  IP        : None
Interval       : 1 minutes
Src MAC        : None
==============================================================================
*A:ALA-48# 
 
 
*A:ALA-48# show redundancy multi-chassis mc-ring peer 10.0.0.2 ring ring11 ring-node
==============================================================================
MC Ring Node entries
==============================================================================
Name                             Loc Oper St.      Failure Reason
  In Use                           Rem Oper St.
------------------------------------------------------------------------------
an1                              connected         None
  Yes                              notTested
an2                              connected         None
  Yes                              notTested
------------------------------------------------------------------------------
No. of MC Ring Node entries: 2
==============================================================================
*A:ALA-48# 
Output Fields: show redundancy multi-chassis mc-ring peer <ip-address> ring

Table 89 describes the output fields for the show redundancy multi-chassis mc-ring peer <ip-address> ring command.

Table 89:  Output Fields: show redundancy multi-chassis mc-ring peer <ip-address> ring  

Label

Description  

Sync Tag

Displays the synchronization tag that was used while synchronizing this port with the multi-chassis peer.

Oper State

noPeer — The peer has no corresponding ring configured.

connected — The in-band control connection with the peer is operational.

broken — The in-band control connection with the peer has timed out.

conflict — The in-band control connection with the peer has timed out but the physical connection is still OK; the failure of the in-band signaling connection is caused by a misconfiguration. For example, a conflict between the configuration of this system and its peer, or a misconfiguration on one of the ring access node systems.

testingRing — The in-band control connection with the peer is being set up. Waiting for result.

waitingForPeer — Verifying if this ring is configured on the peer.

configErr — The ring is administratively up, but a configuration error prevents it from operating properly.

halfBroken — The in-band control connection indicates that the ring is broken in one direction (towards the peer).

localBroken — The in-band control connection with the peer is known to be broken due to local failure or local administrative action.

shutdown — The ring is shutdown.

Failure Reason

Displays the failure reason.

Last Debounce

Displays the last time that the debounce mechanism (protecting the router from overload situations in case of a flapping ring) was activated.

Debounce Period

Displays the duration that the debounce mechanism was in action since the “Last Debounce”.

Sample Output: show redundancy multi-chassis mc-ring peer <ip-address> statistics
*A:ALA-48>show>redundancy>multi-chassis# mc-ring peer 192.168.10.104 statistics
==============================================================================
MC Ring statistics for peer 192.168.10.104
==============================================================================
Message                                              Received     Transmitted
------------------------------------------------------------------------------
MCS ID Request                                       0            0
MCS ID Response                                      0            0
Ring Exists Request                                  0            0
Ring Exists Response                                 0            0
Keepalive                                            0            0
------------------------------------------------------------------------------
Total                                                0            0
==============================================================================
*A:ALA-48>show>redundancy>multi-chassis#
 
Output Fields: show redundancy multi-chassis mc-ring peer <ip-address> statistics

Table 90 describes the output fields for the show redundancy multi-chassis mc-ring peer <ip-address> statistics command.

Table 90:  Output Fields: show redundancy multi-chassis mc-ring peer <ip-address> statistics  

Label

Description  

Message

Displays the message type.

Received

Indicates the number of valid MC-Ring signaling messages received from the peer.

Transmitted

Indicates the number of valid MC-Ring signaling messages transmitted from the peer.

MCS ID Request

Displays the number of valid MCS ID requests were received from the peer.

MCS ID Response

Displays the number of valid MCS ID responses were received from the peer.

Ring Exists Request

Displays the number of valid 'ring exists' requests were received from the peer.

Ring Exists Response

Displays the number of valid ring exists' responses were received from the peer.

Keepalive

Displays the number of valid MC-Ring control packets of type 'keepalive' were received from the peer.

Sample Output: show redundancy multi-chassis mc-ring global-statistics
*A:ALA-48>show>redundancy>multi-chassis# mc-ring global-statistics
==============================================================================
Global MC Ring statistics
==============================================================================
Rx                           : 0
Rx Too Short                 : 0
Rx Wrong Authentication      : 0
Rx Invalid TLV               : 0
Rx Incomplete                : 0
Rx Unknown Type              : 0
Rx Unknown Peer              : 0
Rx Unknown Ring              : 0
Rx Unknown Ring Node         : 0
Tx                           : 36763
Tx No Buffer                 : 0
Tx Transmission Failed       : 0
Tx Unknown Destination       : 0
Missed Configuration Events  : 0
Missed BFD Events            : 0
==============================================================================
*A:ALA-48>show>redundancy>multi-chassis#
Output Fields: show redundancy multi-chassis mc-ring ring-node

Table 91 describes the output fields for the mc-ring ring-node command.

Table 91:  Output Fields: Show redundancy multi-chassis mc-ring ring-node  

Label

Description  

Oper State

Displays the state of the connection verification (both local and remote).

notProvisioned — Connection verification is not provisioned.

configErr — Connection verification is provisioned but a configuration error prevents it from operating properly.

notTested — Connection verification is administratively disabled or is not possible in the current situation.

testing — Connection Verification is active, but no results are yet available.

connected — The ring node is reachable.

disconnected — Connection verification has timed out.

In Use

Displays “True” if the ring node is referenced on an e-pipe or as an inter-dest-id on a static host or dynamic lease.

Output Fields: show redundancy multi-chassis mc-ring global-statistics

Table 92 describes the output fields for the show redundancy multi-chassis mc-ring global statistics command.

Table 92:  Output Fields: show redundancy multi-chassis mc-ring global-statistics  

Label

Description  

Rx

Displays the number of MC-ring signaling packets were received by this system.

Rx Too Short

Displays the number of MC-ring signaling packets were received by this system that were too short.

Rx Wrong Authentication

Displays the number of MC-ring signaling packets were received by this system with invalid authentication.

Rx Invalid TLV

Displays the number of MC-ring signaling packets were received by this system with invalid TLV.

Rx Incomplete

Displays the number of MC-ring signaling packets were received by this system that were incomplete.

Rx Unknown Type

Displays the number of MC-ring signaling packets were received by this system that were of unknown type.

Rx Unknown Peer

Displays the number of MC-ring signaling packets were received by this system that were related to an unknown peer.

Rx Unknown Ring

Displays the number of MC-ring signaling packets were received by this system that were related to an unknown ring.

Rx Unknown Ring Node

Displays the number of MC-ring signaling packets were received by this system that were related to an unknown ring node.

Tx

Displays the number of MC-ring signaling packets were transmitted by this system.

Tx No Buffer

Displays the number of MC-ring signaling packets could not be transmitted by this system due to a lack of packet buffers.

Tx Transmission Failed

Displays the number of MC-ring signaling packets could not be transmitted by this system due to a transmission failure.

Tx Unknown Destination

Displays the number of MC-ring 'unknown destination' signaling packets were transmitted by this system.

Missed Configuration Events

Displays the number of missed configuration events on this system.

Missed BFD Events

Displays the number of missed BFD events on this system.

sync

Syntax 
sync [peer ip-address]
sync peer ip-address detail
sync [peer ip-address] statistics
Context 
show>redundancy>multi-chassis
Description 

This command displays synchronization information.

Parameters 
ip-address—
Specifies the IP address.
Values—
ipv4-address: a.b.c.d
ipv6-address:
  1. x:x:x:x:x:x:x:x (eight 16-bit pieces)
  2. x:x:x:x:x:x:d.d.d.d
  3. x: [0 to FFFF] H
  4. d: [0 to 255] D

 

detail—
Displays detailed information.
statistics—
Displays statistics.

wpp

Syntax 
wpp peer [ip-address] statistics
Context 
show>redundancy>multi-chassis
Description 

This command displays multi-chassis WPP information.

Parameters 
ip-address—
Specifies the IP address.
Values—
ipv4-address: a.b.c.d
ipv6-address:
  1. x:x:x:x:x:x:x:x (eight 16-bit pieces)
  2. x:x:x:x:x:x:d.d.d.d
  3. x: [0 to FFFF] H
  4. d: [0 to 255] D

 

statistics—
Displays statistics.

ethernet

Syntax 
ethernet
Context 
show>system
Description 

This command enables the context to display system-specific Ethernet information.

efm-oam

Syntax 
efm-oam
Context 
show>system>ethernet
Description 

This command displays a system-level summary for EFM-OAM enabled ports. It includes the configuration, action, various states, and soft reset precedence for the protocol.

Output 

The following output is an example of EFM-OAM summary information.

Sample Output
show system ethernet efm-oam
===============================================================================
System Configuration
===============================================================================
Grace Tx Enable              : False
Dying Gasp On Reset          : Disabled
===============================================================================
Active Port Configuration & State Summary
===============================================================================
Fault Header:
  LinkMonitor: F = Frame, FP = Period, FS = Summary, SP = Symbol
  LocalSfAct : CE = Critical, DG = Dying Gasp, EV = Event, PT = Port
  PeerRDIRx  : CE = Critical, DG = Dying Gasp, LF = Link, EV = Event
  Table Legend
  - = Not Configured, c = Configured, * = SF Active, s = Shutdown, l = Log Only
Soft Reset Header:
  Gasp :  T = True, F = False  (A = active, I = inactive)
  Grace:  T = True, F = False  (A = active, I = inactive)
  SR (Action on Soft Reset):  - = None, DG = Dying Gasp, G = Grace TLV
TF (Trigger-Fault):
  - = Not configured, DG = Dying Gasp,  CE = Critical Event
============================================================================
Port        States  LinkMonitor LocalSfAct    PeerRdiRx     SoftReset    TF
            EFM LM  F FP FS SP  CE DG EV PT  CE DG LF EV  Gasp Grace SR
----------------------------------------------------------------------------
1/1/1       Up  Dn  - -  -  -   -  -  -  s   s  s  s  l   T(I) T(I)  -   -
1/1/6       Dn  Dn  - -  -  -   -  -  -  s   s  s  s  l   T(I) T(I)  -   -
----------------------------------------------------------------------------
No. of ports EFM enabled: 2
============================================================================

lldp

Syntax 
lldp
lldp neighbor
Context 
show>system
Description 

This command displays local Link Layer Discovery Protocol (LLDP) information at the system level. This includes an option to display summary information for all known peers.

Parameters 
neighbor—
Displays all LLDP neighbor information.
Output 

The following output is an example of local LLDP information.

Sample Output: show system lldp
show system lldp
===============================================================================
LLDP Configuration
===============================================================================
Transmit Interval      : 30
Hold Multiplier        : 4
Reinit Delay           : 2
Notification Interval  : 5
Tx Credit Max          : 5
Message Fast Tx        : 1
Message Fast Tx Init   : 4
Admin Enabled          : True
 
-------------------------------------------------------------------------------
LLDP System Information
-------------------------------------------------------------------------------
Chassis Id Subtype     : 4
Chassis Id             : d8:1f:ff:00:00:00
System Name            : cses-V31
System Description     : TiMOS-B-0.0.I4269 both/i386 Nokia 7750 SR Copyright
                         (c) 2000-2016 Nokia.
                         All rights reserved. All use subject to applicable
                         license agreements.
                         Built on Wed Dec 3 19:14:27 PST 2014 by builder in /
                         rel0.0/I4269/panos/main
Capabilities Supported : bridge router
Capabilities Enabled   : bridge router
 
-------------------------------------------------------------------------------
LLDP Destination Addresses
-------------------------------------------------------------------------------
Index 1                : 01:80:c2:00:00:0e
Index 2                : 01:80:c2:00:00:03
Index 3                : 01:80:c2:00:00:00
 
-------------------------------------------------------------------------------
LLDP Remote Statistics
-------------------------------------------------------------------------------
Last Change Time       : 12/08/2014 21:34:48
Rem Table Inserts      : 10
Rem Table Deletes      : 1
Rem Table Drops        : 0
Rem Table Ageouts      : 3
 
-------------------------------------------------------------------------------
LLDP System Management Addresses
-------------------------------------------------------------------------------
Address SubType        : 1 (IPv4)
Address                : 10.1.1.31
Address If SubType     : 2
Address If Id          : 1
Address OID            : .1.3.6.1.4.1.6527.1.3.3
Address SubType        : 2 (IPv6)
Address                : 2001:db8:dead:beef::31
Address If SubType     : 2              
Address If Id          : 1
Address OID            : .1.3.6.1.4.1.6527.1.3.3
 
=============================================================================== 
 
show system lldp neighbor
 
Link Layer Discovery Protocol (LLDP) System Information
===============================================================================
NB = nearest-bridge   NTPMR = nearest-non-tpmr   NC = nearest-customer
===============================================================================
Lcl Port  Scope  Remote Chassis ID   Index  Remote Port     Remote System Name
-------------------------------------------------------------------------------
1/1/4     NB     D8:1D:FF:00:00:00   1      1/1/5           cses-v29
1/1/6     NB     D8:1D:FF:00:00:00   2      1/1/7           cses-v29
1/2/2     NB     D8:1F:FF:00:00:00   3      1/1/1           cses-v31
1/2/1     NB     D8:1E:FF:00:00:00   4      1/1/1           cses-v30
1/2/3     NB     D8:20:FF:00:00:00   5      1/1/1           cses-v32
1/2/4     NB     D8:21:FF:00:00:00   6      1/1/1           cses-V33
=============================================================================== 
Number of neighbors : 6

switch-fabric

Syntax 
switch-fabric [exclude-sfm sfm-list]
switch-fabric high-bandwidth-multicast
Context 
show>system
Description 

This command displays switch fabric information. When an MDA is not provisioned in an XCM, no information is displayed relating to that MDA. In order to display the forwarding capacity and multicast planes corresponding to that MDA, regardless of whether an XMA is equipped, an mda-type must be provisioned for that MDA.

Parameters 
sfm-list—
Specifies which SFMs to exclude from the displayed information.
Values—
“A”, “B”, “A,B”, “1”, “2”, and “1,2”

 

high-bandwidth-multicast—
Displays MDA information about the switch-fabric plane’s high bandwidth multicast traffic tap allocation.
Output 

The following output is an example of switch fabric information, and Table 93 describes switch-fabric output fields for 12-slot and 7-slot chassis models.

Sample Output
*A:PE-1# show system switch-fabric high-bandwidth-multicast
===============================================================================
Switch Fabric
===============================================================================
         Cap:               Planes:
Slot/FP  Min  Max  Hbm Grp  Hi | Lo
-------------------------------------------------------------------------------
 2/1     100% 100% No  0     1  0  2  3  4  5  6  7  8  9 10 11 12 13 14 | 15
 5/1     100% 100% No  0    17 16 18 19 20 21 22 23 24 25 26 27 28 29 30 | 31
 A       100% 100% No  0    40 | 40
 B       100% 100% No  0    24 | 24
===============================================================================
*A:PE-1#
Table 93:  Switch fabric output 

Label

Description

Slot/FP

Displays the fabric slot within a chassis in the system. The CPM cards and XCM/IOM cards cannot be physically inserted into the switch fabric card slots.

Cap. Min.

Displays the minimum forwarding capacity of the slot and XMA/MDA as a percentage.

Cap. Max.

Displays the maximum forwarding capacity of the slot and XMA/MDA as a percentage.

2.21.2.5. Multilink Bundle Show Commands

The following multilink bundle show commands apply to the 7450 ESS and 7750 SR only:

multilink-bundle

Syntax 
multilink-bundle [bundle-id | bpgrp-id | slot/mda | type {mlppp | ima-grp | mlfr}] [detail]
multilink-bundle {bundle-id | bpgrp-id | slot/mda} [ppp | ima | mlfr]
multilink-bundle {bundle-id | bpgrp-id} relations
Context 
show
Description 

This command displays multilink bundle information. An operator can display:

  1. All bundles on the system/MDA or all bundles of a given type on the system by specifying the value of type filter to be either mlppp, mlfr or ima-grp.
  2. Bundle specific information in summary (no detail option) or detailed format (detail option specified) for one or more bundles
  3. Protocol specific information (example PPP or IMA) for the specified bundle
  4. ATM interface information for IMA groups see show port atm command for more details
Parameters 
bundle-id —
Specifies the multilink (PPP, MLFR or IMA) bundle to be associated with this IP interface. The command syntax must be used as follows:

Syntax: bundle-type-slot/mda.bundle-num

bundle: keyword

type: ima, fr, ppp

bundle-ppp-slot/mda.bundle-num (Creates a multilink PPP bundle.) bundle-ima-slot/mda.bundle-num (Creates an IMA group bundle.)

bundle-fr-slot/mda.bundle-num (Creates an MLFR group bundle.) bundle-num: 1 to 336

bgrp-id—
Specifies a bundle protection group.
Values—
bgrp-type-bgrp-num
bgrp: keyword
type: ima, ppp
bpgrp-num: 1 to 2000

 

slot/mda—
Specifies the slot an mda numbers associated to the IP interface.
Values—
slot/mda
slot: 1 to 10
mda: 1,2

 

type—
Specifies the multi-link bundle group type.
ppp—
Displays PPP bundle information.
ima, ima-grp—
Displays IMA-type groups.
mlfr—
Displays bundle MLFR information, or used to display MLFR-type groups.
mlppp—
Displays MLPPP-type groups.
detail—
Provides detailed information.
relations—
Displays the working and protection bundles associated with this bundle-id.
Output 
Sample Output: show multilink-bundle
A:timetra-sim110# show multilink-bundle 
===============================================================================
Bundle Summary
===============================================================================
Bundle               Type    Admin     Oper      Port      Min    Total/       
Id                           State     State     State     Links  Active Links 
-------------------------------------------------------------------------------
bundle-ppp-1/1.1     mlppp   Down      Down      Ghost     1      0/0          
bundle-ima-1/1.2     ima     Down      Down      Link Up   1      1/0          
-------------------------------------------------------------------------------
Bundles : 2
===============================================================================
A:timetra-sim110#
Sample Output: show multilink-bundle detail
*A:timetra-44-cpm2# show multilink-bundle detail
===============================================================================
Description        : MultiLink Bundle
Bundle Id          : bundle-ppp-1/1.1   Type               : mlppp             
Admin Status       : up                 Oper Status        : down              
Minimum Links      : 1                  Bundle IfIndex     : 572522497         
Total Links        : 3                  Active Links       : 0                 
Red Diff Delay     : 0                  Yellow Diff Delay  : 0                 
Red Diff Delay Act : none               MRRU               : 1524              
Short Sequence     : true               Oper MRRU          : 1524              
Oper MTU           : 1526               Fragment Threshold : 128 bytes         
Up Time            : N/A                Bandwidth          : 0 KBit            
PPP Input Discards : 0                  Primary Member Port: 1/1/1.1.1.1.1.1   
Mode               : access               
Interleave-Frag    : false                                                     
-------------------------------------------------------------------------------
Member Port Id              #TS   Admin  Oper  Act  Down Reason       Up Time
-------------------------------------------------------------------------------
1/1/1.1.1.1.1.1             12     up     up   no    oper down          N/A    
1/1/1.1.1.1.1.2             12     up     up   no    oper down          N/A    
1/1/1.1.1.1.1.3             12     up     up   no    oper down          N/A    
===============================================================================
Traffic Statistics
===============================================================================
Input                 Output
-------------------------------------------------------------------------------
Octets                                               0                      0
Packets                                              0                      0
Errors                                               0                      0
 
===============================================================================
Port Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Packets                                              0                      0
Discards                                             0                      0
Unknown Proto Discards                               0                       
===============================================================================
*A:timetra-44-cpm2#
Sample Output: show multilink-bundle ima-grp
A:timetra-sim110# show multilink-bundle type ima-grp            
===============================================================================
Bundle Summary
===============================================================================
Bundle               Type    Admin     Oper      Port      Min    Total/       
Id                           State     State     State     Links  Active Links 
-------------------------------------------------------------------------------
bundle-ima-1/1.2     ima     Down      Down      Link Up   1      1/0          
-------------------------------------------------------------------------------
Bundles : 1
===============================================================================
A:timetra-sim110#
Sample Output: show multilink-bundle <bundle-id> (showing PPP)
A:timetra-sim110# show multilink-bundle bundle-ppp-1/1.1
===============================================================================
Bundle Summary
===============================================================================
Bundle               Type    Admin     Oper      Port      Min    Total/       
Id                           State     State     State     Links  Active Links 
-------------------------------------------------------------------------------
bundle-ppp-1/1.1     mlppp   Down      Down      Ghost     1      0/0          
-------------------------------------------------------------------------------
Bundles : 1
===============================================================================
A:timetra-sim110#
 
 
A:timetra-sim110# show multilink-bundle bundle-ppp-1/1.1 detail 
===============================================================================
Bundle bundle-ppp-1/1.1 Detail
===============================================================================
Description        : MultiLink Bundle
Bundle Id          : bundle-ppp-1/1.1   Type               : mlppp             
Admin Status       : down               Oper Status        : down              
Minimum Links      : 1                  Bundle IfIndex     : 555745281         
Total Links        : 0                  Active Links       : 0                 
Red Diff Delay     : 0                  Yellow Diff Delay  : 0                 
Red Diff Delay Act : none               MRRU               : 1524              
Short Sequence     : false              Oper MRRU          : 1524              
Oper MTU           : 1522               Fragment Threshold : 128 bytes         
Up Time            : N/A                Bandwidth          : 0 KBit            
PPP Input Discards : 0                  Primary Member Port: None              
Interleave-Frag    : false 
===============================================================================
Traffic Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                                 0                      0
Packets                                                0                      0
Errors                                                 0                      0
===============================================================================
Port Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Unicast Packets                                        0                      0
Multicast Packets                                      0                      0
Broadcast Packets                                      0                      0
Discards                                               0                      0
Known Proto Discards                                    0                       
===============================================================================
A:timetra-sim110#
Sample Output: show multilink-bundle <bundle-id> detail (showing Frame Relay)
*A:Cpm-A>config>port#  show multilink-bundle 
 
===============================================================================
Bundle Summary
===============================================================================
Bundle               Type    Admin     Oper      Port      Min    Total/       
Id                           State     State     State     Links  Active Links 
-------------------------------------------------------------------------------
bundle-fr-1/1.1      mlfr    Down      Down      Ghost     1      0/0          
-------------------------------------------------------------------------------
Bundles : 1
===============================================================================
Bundle Summary
===============================================================================
Bundle               Type    Admin     Oper      Port      Min    Total/       
Id                           State     State     State     Links  Active Links 
-------------------------------------------------------------------------------
bundle-fr-1/1.1      mlfr    Down      Down      Ghost     1      0/0          
-------------------------------------------------------------------------------
Bundles : 1
===============================================================================
*A:Cpm-A> show multilink-bundle bundle-fr-1/1.1 detail 
===============================================================================
Bundle bundle-fr-1/1.1 Detail
===============================================================================
Description        : MultiLink Bundle
Bundle Id          : bundle-fr-1/1.1    Type               : mlfr              
Admin Status       : down               Oper Status        : down              
Minimum Links      : 1                  Bundle IfIndex     : 572530689         
Total Links        : 0                  Active Links       : 0                 
Red Diff Delay     : 0                  Yellow Diff Delay  : 0                 
Red Diff Delay Act : none               MRRU               : N/A               
Short Sequence     : N/A                Oper MRRU          : N/A               
Oper MTU           : 0                  Fragment Threshold : 128 bytes         
Up Time            : N/A                Bandwidth          : 0 KBit            
PPP Input Discards : N/A                Primary Member Port: None              
Mode               : access                                                    
Interleave-Frag    : N/A                                                       
 
===============================================================================
Traffic Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                                 0                      0
Packets                                                0                      0
Errors                                                 0                      0
 
===============================================================================
Port Statistics
===============================================================================
Input                 Output
-------------------------------------------------------------------------------
Unicast Packets                                        0                      0
Multicast Packets                                      0                      0
Broadcast Packets                                      0                      0
Discards                                               0                      0
Unknown Proto Discards                                 0                       
===============================================================================
*A:Cpm-A> show multilink-bundle bundle-fr-1/1.1 mlfr frame-relay  
 
===============================================================================
Frame Relay Info for bundle-fr-1/1.1
===============================================================================
Mode                    : dte           LMI Type                : itu          
FR Interface Status     : fault                                                
N391 DTE                : 6             N392 DCE                : 3            
N392 DTE                : 3             N393 DCE                : 4            
N393 DTE                : 4             T392 DCE                : 15           
T391 DTE                : 10                                                   
Tx Status Enquiry       : 0             Rx Status Enquiry       : 0            
Rx Status Messages      : 0             Tx Status Messages      : 0            
Status Message Timeouts : 0             Status Enquiry Timeouts : 0            
Discarded Messages      : 0             Inv. RxSeqNum Messages  : 0            
===============================================================================
Service Access Points(SAP)
===============================================================================
Service Id         : 39                                                       
SAP                : 1/1/2.3.5.2.2:18         Encap             : frRel       
Description        : Default sap description for service id 39
Admin State        : Up                       Oper State        : Up          
Flags              : None
Multi Svc Site     : None                                                     
Last Status Change : 12/02/2008 20:48:17                                      
Last Mgmt Change   : 12/02/2008 20:46:38                                      
Sub Type           : regular                                                  
Split Horizon Group: (Not Specified)
 
Admin MTU          : 4474                     Oper MTU          : 4474        
Ingr IP Fltr-Id    : n/a                      Egr IP Fltr-Id    : n/a         
Ingr Mac Fltr-Id   : n/a                      Egr Mac Fltr-Id   : n/a         
Ingr IPv6 Fltr-Id  : n/a                      Egr IPv6 Fltr-Id  : n/a         
tod-suite          : None                     qinq-pbit-marking : both        
Ing Agg Rate Limit : max                      Egr Agg Rate Limit: max         
Endpoint           : N/A                                                      
 
FRF-12             : Disabled                                                 
Acct. Pol          : None                     Collect Stats     : Disabled    
 
-------------------------------------------------------------------------------
 
FRF12 on channel where sap resides:
 
===============================================================================
Service Access Points(SAP)
===============================================================================
Service Id         : 1                                                        
SAP                : 1/1/1.3.7.4.1:16         Encap             : frRel       
Description        : sap-1-88.10.131.1
Admin State        : Up                       Oper State        : Up          
Flags              : None
Multi Svc Site     : None                                                     
Last Status Change : 12/02/2008 20:48:15                                      
Last Mgmt Change   : 12/02/2008 20:46:36                                      
Sub Type           : regular                                                  
Split Horizon Group: (Not Specified)
Admin MTU          : 9194                     Oper MTU          : 9194        
Ingr IP Fltr-Id    : n/a                      Egr IP Fltr-Id    : n/a         
Ingr Mac Fltr-Id   : n/a                      Egr Mac Fltr-Id   : n/a         
Ingr IPv6 Fltr-Id  : n/a                      Egr IPv6 Fltr-Id  : n/a         
tod-suite          : None                     qinq-pbit-marking : both        
Ing Agg Rate Limit : max                      Egr Agg Rate Limit: max         
 
FRF-12 (I/F)       : Enabled                                                  
Scheduling Class   : 0                                                        
Acct. Pol          : None                     Collect Stats     : Disabled    
Anti Spoofing      : None                     Avl Static Hosts  : 0           
                                              Tot Static Hosts  : 0           
Calling-Station-Id : n/a                                                      
Application Profile: None                                                     
-------------------------------------------------------------------------------
 
FRF12 ETE on sap capable of supporting it:
 
================================================================================   
      Service Access Points(SAP)
================================================================================   
  Service Id         : 1                                                        
SAP                : 1/1/1.1:16               Encap             : frRel       
Description        : (Not Specified)
Admin State        : Up                       Oper State        : Up          
Flags              : None
Multi Svc Site     : None                                                     
Last Status Change : 12/02/2008 20:48:12                                      
Last Mgmt Change   : 12/02/2008 20:46:36                                      
Sub Type           : regular                                                  
Split Horizon Group: (Not Specified)
 
Admin MTU          : 9194                     Oper MTU          : 9194        
Ingr IP Fltr-Id    : n/a                      Egr IP Fltr-Id    : n/a         
Ingr Mac Fltr-Id   : n/a                      Egr Mac Fltr-Id   : n/a         
Ingr IPv6 Fltr-Id  : n/a                      Egr IPv6 Fltr-Id  : n/a         
tod-suite          : None                     qinq-pbit-marking : both        
Ing Agg Rate Limit : max                      Egr Agg Rate Limit: max         
 
FRF-12 (ETE)       : Enabled                  Ete-Frag-Threshold: 128         
Scheduling Class   : 3                                                        
Acct. Pol          : None                     Collect Stats     : 
Disabled    
Anti Spoofing      : None                     Avl Static Hosts  : 0           
                                              Tot Static Hosts  : 0           
Calling-Station-Id : n/a                                                      
Application Profile: None                                                     
-------------------------------------------------------------------------------
Output Fields: show multilink-bundle

Table 94 describes the output fields for the show multilink-bundle command.

Table 94:  Output Fields: show multilink-bundle  

Label

Description  

Type

Specifies the type of this multilink bundle.

mlppp — Indicates that the bundle is of type MLPPP.

ima — Indicates that the bundle is of type IMA group.

Admin State

Up — The bundle is administratively up.

Down — The bundle is administratively down.

Oper State

Up — The bundle is operationally up.

Down — The bundle is operationally down.

Port State

Displays the state level of the port.

none — Indicates that the port is either in its initial creation state or is just about to be deleted.

ghost — No member links are configured as part of this bundle.

down — All member links are in “none”, “ghost”, or “down” state.

linkUp — At least one member link is in port state “link up” but the bundle protocol is not yet operationally up (due to bundle protocol still coming up. For example, due to insufficient number of member links in “link up” state yet or to bundle being shut down.

Up — Indicates that the bundle is ready to pass some kinds of traffic as the bundle protocol has come up (at least “minimum links” member links are in the port state up and the bundle protocol is up.)

Min Links

Minimum Links

Displays the minimum number of links that must be active for a bundle to be active. If the number of active links drop below the given minimum then the multilink bundle will transition to an operation down state.

Bundle IfIndex

Displays the bundle’s interface index number which reflects its initialization sequence.

Total Links

Displays the total number of member links configured for this bundle.

Active Links

Displays the total number of active links for the bundle.

Description

Displays configured description for this bundle.

Bundle Id

Displays the port ID for this bundle.

Red Diff Delay

Displays the maximum acceptable differential delay for individual circuits within this multilink bundle. If the delay exceeds this threshold, a trap is issued. The differential delay is calculated as the round-trip differential delay for MLPPP bundles, and as uni-directional differential delay for IMA bundles.

Fragment Threshold

Displays configured fragment threshold value for this bundle.

Up Time

Displays time elapsed since the last bundle transition to Up when part of bundle information. Displays time elapsed since the last link transition to active when part of member information.

Bandwidth

Displays bandwidth configured for this IMA bundle in kbytes.

Primary Port Member

Displays the portId of the IMA group member chosen as a Primary Port.

Member Port Id

Displays portId of each member of this bundle.

Admin

Displays administrative port status of a member link.

Oper

Displays operational port status of a member link.

Active

Displays whether a member link is active or not.

Down Reason

Displays the reason for why a member link is not active.

Traffic and Port statistics

The traffic and port statistics information displayed for bundles when detail option is selected is the same as information displayed for physical ports.

relations

Syntax 
relations
Context 
show>multilink-bundle
Description 

This command displays the working and protection bundles associated with this bundle-id.

Output 

The following output is an example of multilink bundle relations, and Table 95 describes the output fields.

Sample Output: show multilink-bundle <bundle-id> relations
A:ALA-48>show# show multilink-bundle bundle-ima-1/1.2 relations
==============================================================================
Bundle Relationship
==============================================================================
Bundle         Admin   Oper    Working             Protect             Active
Id             State   State   Bundle Id           Bundle Id           Bundle
------------------------------------------------------------------------------
bpgrp-ima-1    Down    Down    bundle-ima-1/1.1    bundle-ima-1/1.2    Protect
------------------------------------------------------------------------------
Bundles : 1
==============================================================================
A:ALA-48>show#
Table 95:  Output Fields: show multilink-bundle relations 

Label

Description

BundleID

Displays the bundle number.

Admin State

Up—The bundle is administratively up.

Down — The bundle is administratively down.

Oper State

Up — The bundle is operationally up.

Down—The bundle is operationally down.

Working BundleID

Displays the bundle that is currently in working mode.

Protect BundleID

Displays the bundle that is currently in protect mode.

Active Bundle

Displays the mode of the active bundle.

ima

Syntax 
ima
Context 
show>multilink-bundle
Description 

This command enables the context to display IMA group data.

Output 

The following output is an example of IMA information, and Table 96 describes the output fields.

Sample Output: show multilink-bundle <bundle-id> ima
A:timetra-sim110# show multilink-bundle bundle-ima-1/1.2
===============================================================================
Bundle Summary
===============================================================================
Bundle               Type    Admin     Oper      Port      Min    Total/       
Id                           State     State     State     Links  Active Links 
-------------------------------------------------------------------------------
bundle-ima-1/1.2     ima     Down      Down      Link Up   1      1/0          
-------------------------------------------------------------------------------
Bundles : 1
===============================================================================
A:timetra-sim110#
 
A:timetra-sim110# show multilink-bundle bundle-ima-1/1.2 detail 
===============================================================================
Bundle bundle-ima-1/1.2 Detail
===============================================================================
Description        : MultiLink Bundle
Bundle Id          : bundle-ima-1/1.2   Type               : ima               
Admin Status       : down               Oper Status        : down              
Minimum Links      : 1                  Bundle IfIndex     : 555749378         
Total Links        : 1                  Active Links       : 0                 
Red Diff Delay     : 25                 Yellow Diff Delay  : N/A               
Red Diff Delay Act : down               MRRU               : N/A               
Short Sequence     : N/A                Oper MRRU          : N/A               
Oper MTU           : 1524               Fragment Threshold : 128 bytes         
Up Time            : N/A                Bandwidth          : 0 KBit            
PPP Input Discards : N/A                Primary Member Port: 1/1/1.1.1.1       
Interleave-Frag    : N/A                                                       
-------------------------------------------------------------------------------
Member Port Id              Admin Oper  Active  Down Reason       Up Time
-------------------------------------------------------------------------------
1/1/1.1.1.1                 up    up    no      oper down         N/A 
===============================================================================
Traffic Statistics                    
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                                 0                      0
Packets                                                0                      0
Errors                                                 0                      0
===============================================================================
Port Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Packets                                                0                      0
Discards                                               0                      0
Unknown Proto Discards                                 0                       
===============================================================================
A:timetra-sim110#
 
A:timetra-sim110# show multilink-bundle bundle-ima-1/1.2 ima
===============================================================================
Bundle bundle-ima-1/1.2 IMA group information
===============================================================================
Version            : 1.1                                                       
Current State      : Startup Near-end                                          
Near-end State     : Startup                                                   
Far-end State      : Not configured                                            
Group Test State   : Disabled                                                  
Max BW Links       : 8                                                         
Operational Secs   : N/A                Down Secs          : 2811              
Tx IMA Id          : 0                  Rx IMA Id          : 255               
Tx Timing Ref Link : N/A                Rx Timing Ref Link : N/A               
Tx Oam Label       : 3                  Rx Oam Label       : 0                 
Test Link          : N/A                Test Pattern       : 0                 
Near-End Clock-Mode: ctc                Far-End Clock-Mode : itc               
Link Deact Timer   : 2000               Link Act Timer     : 10000             
Alpha-value        : 2                  Beta-value         : 2                 
Gamma-value        : 1                  Symmetry Mode      : symmetric         
Tx CR Available    : 0 KBit             Rx CR Available    : 0 KBit            
Least Delayed Link : N/A                Max Obs Diff Delay : 0                 
Near-End Fails     : 1                  Far-end Fails      : 0                 
Tx Icp Cells       : 0                  Rx Icp Cells       : 0                 
Errored Icp Cells  : 0                  Rx Lost Icp Cells  : 0                 
===============================================================================
A:timetra-sim110#

The following stats should only be displayed if the bundle type is mlppp-lfi and the detail is issued.

LFI Statistics   
IngressEgress
Packet Bytes PacketByte
High5000500000020002000000
Normal100001000000050005000000
===============================================================================
Table 96:  Output Fields: show multilink-bundle bundle-ima  

Label

Description  

BundleId

Displays the bundle ID number.

Type

Specifies the type of this multilink bundle.

mlppp — Indicates that the bundle is of type MLPPP.

ima — Indicates that the bundle is of type IMA group.

Admin State

ima — Indicates that the bundle is of type IMA group.

Down — The bundle is administratively down.

Oper State

Up — The bundle is operationally up.

Down — The bundle is operationally down.

Port State

Displays the state level of the port.

None — Indicates that the port is either in its initial creation state or is just about to be deleted.

Ghost — No member links are configured as part of this bundle.

Down — All member links are in “none”, “ghost”, or “down” state.

linkUp — At least one member link is in port state “link up” but the bundle protocol is not yet operationally up (due to bundle protocol still coming up. For example, due to insufficient number of member links in “link up” state yet or to bundle being shut down.

Up — Indicates that the bundle is ready to pass some kinds of traffic as the bundle protocol has come up (at least “minimum links” member links are in the port state up and the bundle protocol is up).

Min Links

Minimum Links

Displays the minimum number of links that must be active for a bundle to be active. If the number of links drop below the given minimum then the multilink bundle will transition to an operation down state).

Total/Active Links

Displays the total number of active links for the bundle.

ppp

Syntax 
ppp [multiclass]
Context 
show>multilink-bundle
Description 

This command enables the context to display PPP group data.

Parameters 
multiclass—
Specifies to display multi-class MLPPP information.
Output 

The following output is an example of PPP information.

Sample Output: show multilink-bundle <bundle-id> ppp
A:timetra-sim110# show multilink-bundle bundle-ppp-1/1.1 ppp
===============================================================================
PPP Protocols for bundle-ppp-1/1.1
===============================================================================
Protocol  State         Last Change         Restart Count   Last Cleared       
-------------------------------------------------------------------------------
ipcp      initial       02/16/2007 06:11:44          0      02/16/2007 06:11:44
mplscp    initial       02/16/2007 06:11:44          0      02/16/2007 06:11:44
bcp       initial       02/16/2007 06:11:44          0      02/16/2007 06:11:44
osicp     initial       02/16/2007 06:11:44          0      02/16/2007 06:11:44
ipv6cp    initial       02/16/2007 06:11:44          0      02/16/2007 06:11:44
===============================================================================
Local Mac address  : 8c:6e:01:01:00:3d  Remote Mac address : 00:00:00:00:00:00 
Local IPv4 address : 0.0.0.0            Remote IPv4 address: 0.0.0.0           
Local IPv6 address : ::                                    
Remote IPv6 address: ::                                    
===============================================================================
*A:mlppp_top#
 
 
*A:mlppp_top# show multilink-bundle bundle-ppp-1/1.1 ppp multiclass 
===============================================================================
MLPPP Per Class Traffic Statistics for bundle-ppp-1/1.1
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Class  0                                                                       
  Octets                                               0                      0
  Packets                                              0                      0
  Errors                                               0                      0
Class  1                                                                       
  Octets                                               0                      0
  Packets                                              0                      0
  Errors                                               0                      0
Class  2                                                                       
  Packets                                              0                      0
  Errors                                               0                      0
Class  3                                                                       
  Octets                                               0                 270400
  Packets                                              0                   2704
  Errors                                               0                      0
===============================================================================
*A:mlppp_top#

atm

Syntax 
atm [detail]
Context 
show>ml-bundle>ima
Description 

This command displays multilink bundle IMA ATM information.

Parameters 
detail—
Displays detailed information.
Output 

The following output is an example of IMA ATM information, and Table 97 describes the output fields.

Sample Output: show multilink-bundle <bundle-id> ima atm>
A:NS052651098# show multilink-bundle bundle-ima-1/1.1 ima atm 
=============================================================================
ATM Info for bundle-ima-1/1.1
=============================================================================
Cell Mode             : UNI               Mapping            : Direct        
Configured VCs        : 1                 Configured VPs     : 0             
Configured VTs        : 0                 Configured IFCs    : 0             
Configured minimum VPI: 0                                                    
Last Unknown VPI/VCI  : none 
===============================================================================
ATM Bandwidth Info
===============================================================================
                     kbps      %                             kbps      %       
-------------------------------------------------------------------------------
Ingress CBR        : 15232     100%     Egress CBR         : 15232     100%    
Ingress RT-VBR     : 0          0%      Egress RT-VBR      : 0          0%     
Ingress NRT-VBR    : 0          0%      Egress NRT-VBR     : 0          0%     
Ingress UBR        : 0          0%      Egress UBR         : 0          0%     
-------------------------------------------------------------------------------
Ingress Total      : 15232     100%     Egress Total       : 15232     100%    
ATM Link Bandwidth : 15232 kbps    
Shaped Bandwidth   : 15232 kbps    
Table 97:  Output Fields: show multilink-bundle <bundle-id> ima atm  

Label

Description  

Cell Mode

Displays the cell format (UNI or NNI) used on the ATM interface.

Configured VCs

Displays the number of configured VCs.

Configured VTs

Displays the number of configured VTs.

Configured minimum VPI

Displays the minimum VPI configured for this bundle.

Last Unknown VPI/VCI

Indicates the last unknown VPI/VCI that was received on this interface.

Mapping

Displays ATM cell mapping used on this interface: Direct or PLCP.

Configured VPs

Displays the number of configured VPs.

Configured IFCs

Displays the number of configured IFCs.

connections

Syntax 
connections
Context 
show>ml-bundle>ima>atm
Description 

This command displays connection information.

Output 

The following output is an example of IMA ATM connections information, and Table 98 describes the output fields.

Sample Output: show multilink-bundle bundle-ima ima atm connections
A:NS052651098# show multilink-bundle bundle-ima-1/1.1 ima atm connections 
================================================================
ATM Connections, Port bundle-ima-1/1.1
================================================================
           Owner  Type     Ing.TD  Egr.TD  Adm  OAM         Opr                
----------------------------------------------------------------
1/100      SAP    PVC      2       2       up   up          up  
================================================================
A:NS052651098#
Table 98:  Output Fields: show multilink-bundle <bundle-id> ima atm connections 

Label

Description  

Owner

Identifies the system entity that owns a specific ATM connection.

Type

Specifies the type of this multilink bundle.

mlppp — Indicates that the bundle is of type MLPPP.

ima — Indicates that the bundle is of type IMA group.

Ing.TD

Specifies the ATM traffic descriptor profile that applies to the receive direction of the interface connection.

Egr.TD

Specifies the ATM traffic descriptor profile that applies to the transmit direction of the interface connection.

Adm

ima — Indicates that the bundle is of type IMA group.

Down — The bundle is administratively down.

Opr

Up — The bundle is operationally up.

Down — The bundle is operationally down.

OAM

Indicates the OAM operational status of ATM connections.

port-connection

Syntax 
port-connection [detail]
Context 
show>ml-bundle>ima>atm
Description 

This command displays port connection information.

Parameters 
detail —
Displays detailed information.
Output 

The following output is an example of port connection information, and Table 99 describes the output fields.

Sample Output: show multilink-bundle <bundle-id> ima atm port-connection
A:NS052651098# show multilink-bundle bundle-ima-1/1.1 ima atm port-connection 
==============================================================================
ATM Port Connection
==============================================================================
Port Id            : bundle-ima-1/1.1                                         
Admin State        : up                  Oper state         : up              
Owner              : SAP                                                      
Endpoint Type      : Port                Cast Type          : P2P             
Ing. Td Idx        : 2                   Egr. Td Idx        : 2               
Last Changed       : 01/16/2007 14:24:00                                      
==============================================================================
A:NS052651098#
Table 99:  Output Fields: show multilink-bundle <bundle-id> ima atm port-connection 

Label

Description  

Port ID

Displays the port ID for this bundle.

Admin State

ima — Indicates that the bundle is of type IMA group.

Down — The bundle is administratively down.

Oper State

Up — The bundle is operationally up.

Down—The bundle is operationally down.

Owner

Identifies the system entity that owns a specific ATM connection.

Endpoint Type

Displays the endpoint type.

Cast Type

Indicates the connection topology type.

Ing. Td Idx

Specifies the ATM traffic descriptor profile that applies to the receive direction of the interface connection.

Egr. Td Idx

Specifies the ATM traffic descriptor profile that applies to the transmit direction of the interface connection.

Last Changed

Indicates the date and time when the interface connection entered its current operational state.

pvc

Syntax 
pvc [vpi[/vci]] [detail]
Context 
show>ml-bundle>ima>atm
Description 

This command displays ATM port PVC information.

Parameters 
vpi—
Displays the VPI values.
Values—
vpi: 0 to 4095 (NNI) 0 to 255 (UNI)

 

vci: —
Displays the VCI values.
Values—
1, 2, 5 to 65535

 

detail —
Provides detailed information.
Output 

The following output is an example of PVC information, and Table 100 describes the output fields.

Sample Output: show multilink-bundle <bundle-id> ima atm pvc
A:NS052651098# show multilink-bundle bundle-ima-1/1.1 ima atm pvc 
================================================================
ATM PVCs, Port bundle-ima-1/1.1
================================================================
VPI/VCI    Owner  Type     Ing.TD  Egr.TD  Adm  OAM         Opr                
----------------------------------------------------------------
1/100      SAP    PVC      2       2       up   up          up  
================================================================
A:NS052651098#
 
 
A:NS052651098# show multilink-bundle bundle-ima-1/1.1 ima atm pvc detail 
================================================================
ATM PVCs, Port bundle-ima-1/1.1
================================================================
VPI/VCI    Owner  Type     Ing.TD  Egr.TD  Adm  OAM         Opr                
----------------------------------------------------------------
1/100      SAP    PVC      2       2       up   up          up  
 
===============================================================================
ATM Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                                 0                      0
Cells                                                  0                      0
===============================================================================
AAL-5 Packet Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Packets                                                0                      0
Dropped Packets                                        0                      0
CRC-32 Errors                                          0                       
Reassembly Timeouts                                    0                       
Over Sized SDUs                                        0                       
===============================================================================
ATM OAM Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
AIS                                                    0                      0
RDI                                                    0                      0
Loopback                                               0                      0
CRC-10 Errors                                          0                       
Other                                                  0                       
===============================================================================
A:NS052651098#
Table 100:  Output Fields: show multilink-bundle <bundle-id> ima atm pvc  

Label

Description  

VPI/VCI

Displays the VPI/VCI value.

Owner

Specifies the type of this multilink bundle.

mlppp — Indicates that the bundle is of type MLPPP.

ima — Indicates that the bundle is of type IMA group.

Type

Identifies the system entity that owns a specific ATM connection.

Ing.TD

Specifies the ATM traffic descriptor profile that applies to the receive direction of the interface connection.

Egr.TD

Specifies the ATM traffic descriptor profile that applies to the transmit direction of the interface connection.

Adm

ima — Indicates that the bundle is of type IMA group.

Down — The bundle is administratively down.

Opr

Up — The bundle is operationally up.

Down — The bundle is operationally down.

OAM

Indicates the OAM operational status of ATM connections.

pvp

Syntax 
pvp [vpi] [detail]
Context 
show>ml-bundle>ima>atm
Description 

This command displays ATM port PVP information.

Parameters 
vpi—
Displays the VPI values.
Values—
vpi: 0 to 4095 (NNI) 0 to 255 (UNI)

 

detail —
Displays detailed information.
Output 

The following output is an example of PVP information, and Table 101 describes the output fields.

Sample Output: show multilink-bundle <bundle-id> ima atm pvp
A:ima2# show multilink-bundle bundle-ima-1/1.1 ima atm pvp 
================================================================
ATM PVPs, Port bundle-ima-1/1.1
================================================================
VPI        Owner  Type     Ing.TD  Egr.TD  Adm  OAM         Opr               
----------------------------------------------------------------
2          SAP    PVP      1       1       up   up          up  
================================================================
A:ima2#
Table 101:  Output Fields: show multilink-bundle <bundle-id> ima atm pvp 

Label

Description  

VPI

Displays the VPI value.

Owner

Identifies the system entity that owns a specific ATM connection.

Type

Specifies the type of this multilink bundle.

mlppp — Indicates that the bundle is of type MLPPP.

ima — Indicates that the bundle is of type IMA group.

Ing.TD

Specifies the ATM traffic descriptor profile that applies to the receive direction of the interface connection.

Eng.TD

Specifies the ATM traffic descriptor profile that applies to the transmit direction of the interface connection.

Adm

ima — Indicates that the bundle is of type IMA group.

Down — The bundle is administratively down.

OAM

Indicates the OAM operational status of ATM connections.

Opr

Up — The bundle is operationally up.

Down — The bundle is operationally down.

pvt

Syntax 
pvt [vpi.vpi] [detail]
Context 
show>ml-bundle>ima>atm
Description 

This command displays ATM port PVT information.

Parameters 
vpi.vpi—
Displays the VPI values.
Values—
vpi: 0 to 4095 (NNI) 0 to 255 (UNI)
vpi: 0 to 4095 (NNI) 0 to 255 (UNI)

 

detail —
Provides detailed information.
Output 

The following output is an example of PVT information, and Table 102 describes the output fields.

Sample Output: show multilink-bundle <bundle-id> ima atm pvt
A:ima2# show multilink-bundle bundle-ima-1/1.1 ima atm pvt 
================================================================
ATM PVTs, Port bundle-ima-1/1.1
================================================================
VPI Range  Owner  Type     Ing.TD  Egr.TD  Adm              Opr                
----------------------------------------------------------------
4.5        SAP    PVT      1       1       up               up  
================================================================
A:ima2#
Table 102:  Output Fields: show multilink-bundle <bundle-id> ima atm pvt  

Label

Description  

VPI Range

Displays the VPI range:

Owner

Identifies the system entity that owns a specific ATM connection.

Type

Specifies the type of this multilink bundle.

mlppp — Indicates that the bundle is of type MLPPP.

ima — Indicates that the bundle is of type IMA group.

Ing.Td

Specifies the ATM traffic descriptor profile that applies to the receive direction of the interface connection.

Egr.Td

Specifies the ATM traffic descriptor profile that applies to the transmit direction of the interface connection.

Adm

ima — Indicates that the bundle is of type IMA group.

Down — The bundle is administratively down.

Opr

Up — The bundle is operationally up.

Down — The bundle is operationally down.

2.21.2.6. LAG Show Commands

lag

Syntax 
lag [lag-id] [detail] [statistics]
lag [lag-id] description
lag [lag-id] port
lag lag-id associations per-link-hash interface [class {1 | 2 | 3}]
lag lag-id associations
lag lag-id bfd
lag lag-id [detail] eth-cfm [tunnel tunnel-id]
lag lag-id associations per-link-hash interface
lag lag-id associations link-map-profile [link-map-profile] interface
lag lag-id lacp-partner
lag lag-id detail lacp-partner
lag lag-id link-map-profile link-map-profile
lag lag-id per-link-hash [class {1 | 2 | 3}]
lag lag-id associations per-link-hash sap [class {1 | 2 | 3}]
lag lag-id associations link-map-profile [link-map-profile] sap
lag lag-id per-link-hash port port-id
Context 
show
Description 

This command displays Link Aggregation Group (LAG) information.

If no command line options are specified, a summary listing of all LAGs is displayed.

Parameters 
lag-id—
Displays only information on the specified LAG ID.
Values—
1 to 800

 

Default—
Displays information for all LAG IDs.
detail—
Displays detailed LAG information.
Default—
Displays summary information.
statistics—
Displays LAG statistics information.
port—
Displays port information.
description—
Displays the user-defined description for the LAG.
associations—
Displays a list of current router interfaces to which the LAG is assigned.
interface—
Displays interface information.
bfd—
Displays per-member BFD information.
eth-cfm—
Displays a list of Ethernet tunnels to which the LAG is assigned.
tunnel-id—
Filters ETH-CFM MEP information to one tunnel.
Values—
1 to 4094

 

per-link-hash—
Displays information about a SAP or interface associated with this LAG will send traffic over a single link of a LAG auto-re-balancing as links are added and removed from this LAG.
lacp-partner—
Displays LACP partner information.
link-map-profile
Displays information about a specified LAG link map profile.
Values—
1 to 64

 

sap—
Displays SAP information.
port-id—
Specifies the port ID.
Values—
slot/mda/port

 

Output 
Sample Output: show lag
A:ALA-48>config# show lag
=============================================================================== 
Lag Data 
=============================================================================== 
Lag-id         Adm     Opr     Port-Threshold   Up-Link-Count   MC Act/Stdby   
------------------------------------------------------------------------------- 
1              up      down    0                0               N/A             
2              up      up      0                1               active         
3              up      down    0                0               standby         
4              up      down    0                0               standby         
10             up      down    0                0               N/A             
------------------------------------------------------------------------------- 
Total Lag-ids: 5       Single Chassis: 2        MC Act: 1       MC Stdby: 2 
=============================================================================== 
A:ALA-48>config# show lag
 
 
A:sr7- show lag 10 port
===============================================================================
Lag Port States
LACP Status: e - Enabled, d - Disabled
===============================================================================
Lag-id Port-id   Adm   Act/Stdby Opr   Primary  Sub-group     Forced  Priority
-------------------------------------------------------------------------------
10(e)  1/1/8     up    active    up    yes      1             -       32768
       1/1/9     up    standby   down           2             -       32768
===============================================================================
Output Fields: show lag

Table 103 describes the output fields for the show lag command.

Table 103:  Output Fields: show lag 

Label

Description

LAG ID

The LAG or multi-link bundle ID that the port is assigned to.

Adm

Up — The LAG is administratively up.

Down — The LAG is administratively down.

Opr

Up — The LAG is operationally up.

Down—The LAG is operationally down.

Port-Threshold

The number of operational links for the LAG at or below which the configured action will be invoked.

Up-Link-Count

The number of ports that are physically present and have physical links present.

MC Act/Stdby

Member port is selected as active or standby link.

Sample Output: show lag <lag-id> detail
ALA-1# show lag 10 detail 
===============================================================================
LAG Details
===============================================================================
Description        : N/A
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id              : 10                    Mode                 : network
Adm                 : up                    Opr                  : up
Thres. Exceeded Cnt : 17                    Port Threshold       : 0
Thres. Last Cleared : 01/22/2000 19:41:38   Threshold Action     : down
Dynamic Cost        : false                 Encap Type           : null
Configured Address  : 0c:a4:02:20:69:4b     Lag-IfIndex          : 1342177290
Hardware Address    : 0c:a4:02:20:69:4b
Hold-time Down      : 0.0 sec               Port Type            : standard
Per FP Ing Queuing  : disabled              
LACP                : enabled               Mode                 : active
LACP Transmit Intvl : fast                  LACP xmit stdby      : enabled
Selection Criteria  : highest-count         Slave-to-partner     : disabled
MUX control         : coupled
Number of sub-groups: 2                     Forced               : -
System Id           : 0c:a4:02:20:68:01     System Priority      : 32768
Admin Key           : 32770                 Oper Key             : 32770
Prtr System Id      : 0c:a4:02:1f:88:01     Prtr System Priority : 32768
Prtr Oper Key       : 32771                 
Standby Signaling   : lacp                  
 
-------------------------------------------------------------------------------
Port-id        Adm     Act/Stdby Opr     Primary   Sub-group     Forced  Prio 
-------------------------------------------------------------------------------
1/1/8          up      active    up      yes       1             -       32768
1/1/9          up      standby   down              2             -       32768
 
-------------------------------------------------------------------------------
Port-id        Role      Exp   Def   Dist  Col   Syn   Aggr  Timeout  Activity
-------------------------------------------------------------------------------
1/1/8          actor     No    No    Yes   Yes   Yes   Yes   Yes      Yes
1/1/8          partner   No    No    Yes   Yes   Yes   Yes   Yes      Yes
1/1/9          actor     No    No    No    No    No    Yes   Yes      Yes
1/1/9          partner   No    No    No    No    No    Yes   Yes      Yes
===============================================================================
ALA-1#
Output Fields: show lag <lag-id> detail

Table 104 describes the output fields for the show lag lag-id detail command. The output is dependent on whether or not the LAG was configured as a multi-chassis (MC) LAG.

Table 104:  Output Fields: show lag <lag-id> detail  

Label

Description  

LAG ID

The LAG or multi-link trunk (MLT) that the port is assigned to.

Adm

Up — The LAG is administratively up.

Down — The LAG is administratively down.

Port Threshold

If the number of available links is equal or below this number, the threshold action is executed.

Thres. Last Cleared

The last time that keepalive stats were cleared.

Dynamic Cost

The OSPF costing of a link aggregation group based on the available aggregated, operational bandwidth.

Configured Address

The configured Ethernet MAC address.

Hardware Address

The Ethernet MAC address.

Hold-Time Down

The timer, in tenths of seconds, which controls the delay between detecting that a LAG is down and reporting it to the higher levels.

LACP

Enabled — LACP is enabled.

Down — LACP is disabled.

LACP Transmit Intvl

LACP timeout signaled to peer.

Selection Criteria

Configured subgroup selection criteria.

MUX control

Configured type of multiplexing machine control used in a LAG with LACP in active/passive modes.

coupled — TX and RX activate together.

independent — RX activates independent of TX.

Number of subgroups

Total subgroups in LAG.

System ID

System ID used by actor in LACP messages.

Admin Key

Configured LAG key.

Oper Key

Key used by actor in LACP messages.

System Priority

System priority used by actor in LACP messages.

Prtr System ID

System ID used by partner in LACP messages.

Prtr Oper Key

Key used by partner in LACP messages.

Prtr System Priority

System priority used by partner in LACP messages.

Mode

LAG in access or network mode.

Opr

Up — The LAG is operationally up.

Down — The LAG is operationally down.

Port Threshold

Configured port threshold.

Thres. Exceeded Cnt

The number of times that the drop count was reached.

Threshold Action

Action to take when the number of available links is equal or below the port threshold.

Encap Type

The encapsulation method used to distinguish customer traffic on a LAG.

Lag-IFIndex

A box-wide unique number assigned to this interface.

Adapt QoS

Displays the configured QoS mode.

Port ID

The specific port ID.

(LACP) Mode

LACP active or passive mode.

LACP xmit standby

LACP transmits on standby links enabled / disabled.

Slave-to-partner

Configured enabled/disabled.

Port-id

Displays the member port ID.

Adm

Displays the member port administrative state.

Active/stdby

Indicates that the member port is selected as the active or standby link.

Opr

Indicates that the member port operational state.

Primary

Indicates that the member port is the primary port of the LAG.

Sub-group

Displays the member subgroup where the member port belongs to.

Priority

Displays the member port priority.

Sample Output: Show LAG Statistics
===============================================================================
LAG Statistics
===============================================================================
-------------------------------------------------------------------------------
LAG 2
-------------------------------------------------------------------------------
Description        : N/A
Port-id       Input(Packets)                   Output(Packets)
              Input(Bytes)                     Output(Bytes)
              Input Errors                     Output Errors
-------------------------------------------------------------------------------
1/1/4         0                                0
              0                                0
              0                                0
-------------------------------------------------------------------------------
Totals        0                                0
              0                                0
              0                                0
===============================================================================
Output Fields: Show LAG Statistics

Table 105 describes the output fields for the show lag statistics command.

Table 105:  Output Fields: Show Lag Statistics  

Label

Description  

LAG ID

The LAG or multi-link trunk (MLT) that the port is assigned to.

Port ID

The port ID.

Input Bytes

The number of incoming bytes for the LAG on a per-port basis.

Input Packets

The number of incoming packets for the LAG on a per-port basis.

Output Bytes

The number of outbound bytes for the LAG on a per-port basis.

Output Packets

The number of outbound packets for the LAG on a per-port basis.

Input/Output Errors

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character- oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol.

For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors.

Totals

Displays the column totals for bytes, packets, and errors.

Sample Output: Show LAG <lag-id> Associations
A:ALA-1# show lag 5 associations
==============================================================================
Interface Table
==============================================================================
Router/ServiceId                Name                            Encap Val
------------------------------------------------------------------------------
Router: Base                    LAG2West                        0
------------------------------------------------------------------------------
Interfaces
==============================================================================
A:ALA-1#
Sample Output: Show LAG <lag-id> detail (with MC-LAG Output)
*A:pc5# show lag 2 detail
===============================================================================
LAG Details
===============================================================================
Description:
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id              : 2                     Mode                 : access
Adm                 : up                    Opr                  : up
Thres. Exceeded Cnt : 2                     Port Threshold       : 0
Thres. Last Cleared : 04/11/2007 21:50:55   Threshold Action     : down
Dynamic Cost        : false                 Encap Type           : dot1q
Configured Address  : 8e:8b:ff:00:01:42     Lag-IfIndex          :
1342177282
Hardware Address    : 8e:8b:ff:00:01:42     Adapt Qos            :
distribute
Hold-time Down      : 0.0 sec
LACP                : enabled               Mode                 : active
LACP Transmit Intvl : fast                  LACP xmit stdby      : enabled
Selection Criteria  : highest-count         Slave-to-partner     : disabled
Number of sub-groups: 2                     Forced               : -
System Id           : 8e:8b:ff:00:00:00     System Priority      : 32768
Admin Key           : 32768                 Oper Key             : 32768
Prtr System Id      : 8e:89:ff:00:00:00     Prtr System Priority : 32768
Prtr Oper Key       : 32768
 
MC Peer Address     : 10.10.10.101          MC Peer Lag-id       : 2
MC System Id        : 01:01:01:01:01:01     MC System Priority   : 2
MC Admin Key        : 1                     MC Active/Standby    : active
MC Lacp ID in use   : false                 MC extended timeout  : false
MC Selection Logic  : waiting for peer info MC Config Mismatch  : no mismatch
-------------------------------------------------------------------------------
Port-id        Adm    Act/Stdby Opr    Primary   Sub-group     Forced
Prio
-------------------------------------------------------------------------------
1/1/1          up     active    up     yes       7             -        99
1/1/2          up     standby   down             8             -        100
-------------------------------------------------------------------------------
Port-id        Role      Exp   Def   Dist  Col   Syn   Aggr  Timeout
Activity
-------------------------------------------------------------------------------
1/1/1          actor     No    No    Yes   Yes   Yes   Yes   Yes      Yes
1/1/1          partner   No    No    Yes   Yes   Yes   Yes   Yes      Yes
1/1/2          actor     No    No    No    No    No    Yes   Yes      Yes
1/1/2          partner   No    No    No    No    Yes   Yes   Yes      Yes
===============================================================================
*A:pc5#
Sample Output: show lag <lag-id> detail (Without MC-LAG Output)
*A:pc5# show lag 2 detail
===============================================================================
LAG Details
===============================================================================
Description:
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id              : 2                     Mode                 : access
Adm                 : up                    Opr                  : up
Thres. Exceeded Cnt : 4                     Port Threshold       : 0
Thres. Last Cleared : 04/11/2007 02:03:49   Threshold Action     : down
Dynamic Cost        : false                 Encap Type           : dot1q
Configured Address  : 8e:8b:ff:00:01:42     Lag-IfIndex          :
1342177282
Hardware Address    : 8e:8b:ff:00:01:42     Adapt Qos            :
distribute
Hold-time Down      : 0.0 sec
LACP                : enabled               Mode                 : active
LACP Transmit Intvl : fast                  LACP xmit stdby      : enabled
Selection Criteria  : highest-count         Slave-to-partner     : disabled
Number of sub-groups: 2                     Forced               : -
System Id           : 8e:8b:ff:00:00:00     System Priority      : 32768
Admin Key           : 32768                 Oper Key             : 32768
Prtr System Id      : 8e:89:ff:00:00:00     Prtr System Priority : 32768
Prtr Oper Key       : 32768
-------------------------------------------------------------------------------
Port-id        Adm    Act/Stdby Opr    Primary   Sub-group     Forced
Prio
-------------------------------------------------------------------------------
1/1/1          up     active    up     yes       7             -        99
1/1/2          up     standby   down             8             -        100
-------------------------------------------------------------------------------
Port-id        Role      Exp   Def   Dist  Col   Syn   Aggr  Timeout
Activity
-------------------------------------------------------------------------------
1/1/1          actor     No    No    Yes   Yes   Yes   Yes   Yes      Yes
1/1/1          partner   No    No    Yes   Yes   Yes   Yes   Yes      Yes
1/1/2          actor     No    No    No    No    No    Yes   Yes      Yes
1/1/2          partner   No    No    No    No    Yes   Yes   Yes      Yes
===============================================================================
*A:pc5#
 
*A:Dut-A# show lag 2 associations per-link-hash sap
===============================================================================
SAP Associations
===============================================================================
SvcId      SAP                          Active Link            Oper   Oper
                                                                Class  Weight
-------------------------------------------------------------------------------
2          lag-2:4                          1/1/1               1      500
2          lag-2:5                          1/1/1               1      100
2          lag-2:6                          1/1/26              1      1000
2          lag-2:7                          1/1/25              1      1000
===============================================================================
Number of SAP associations: 4
 
A:bksim4001# show lag 1  per-link-hash         
===============================================================================
Per-link-hash Weight
===============================================================================
Port                             Class      Num Users  Agg Weight
-------------------------------------------------------------------------------
1/1/1                            1          0         0
1/1/1                            2          0          0
1/1/1                            3          0          0
===============================================================================
Number of entries: 3
===============================================================================
Sample Output: show lag <lag-id> lcap-partner
A:ALU-Dut1# show lag 3 lacp-partner
===============================================================================
LAG Partner information
===============================================================================
Partner system ID           : ea:3e:ff:00:00:00
Partner system priority     : 32768
Partner operational key     : 2
===============================================================================
===============================================================================
LAG 3 Ports Partner operational information
===============================================================================
Port                        Actor Port  Prio  Key
                            port
-------------------------------------------------------------------------------
1/1/52                      33908 33909 5     2
1/1/54                      33910 33911 5     2
1/1/56                      33912 33913 7     2
===============================================================================
===============================================================================
LAG 3 Ports Partner operational state information
===============================================================================
Port                        Exp  Def  Dist Col  Syn  Aggr Time Act
                                                          out
-------------------------------------------------------------------------------
1/1/52                      No   No   Yes  Yes  Yes  Yes  Yes  Yes
1/1/54                      No   No   Yes  Yes  Yes  Yes  Yes  Yes
1/1/56                      No   No   No   No   No   Yes  Yes  Yes
===============================================================================
A:ALU-Dut1# 
 
 
A:Dut-A# show lag 10 lacp-neighbors 
===============================================================================
LAG Neighbor information
===============================================================================
Partner system ID           : de:41:ff:00:00:00
Partner system priority     : 32768
Partner operational key     : 32768
===============================================================================
-------------------------------------------------------------------------------
LAG port 1/1/6 partner information
-------------------------------------------------------------------------------
Actor port                  : 33862
Partner admin system prio   : 32768
Partner oper system prio    : 32768
Partner admin system ID     : 00:00:00:00:00:00
Partner oper system ID      : de:41:ff:00:00:00
Partner admin key           : 0
Partner oper key            : 32768
Partner admin port          : (Not Specified)
Partner oper port           : 33863
Partner admin port prio     : 32768
Partner oper port prio      : 32768
Partner admin state         : (Not Specified)
Partner oper state          : lacp-timeout aggregation synchronization
                              collecting distributing
===============================================================================
A:Dut-A#
 
 
*A:bksim4001>config>lag# selection-criteria highest-weight subgroup-hold-
time 1show lag 1 detail                                         
ght subgroup-hold-time 10 
===============================================================
LAG Details
===============================================================
Description        : To Sim4002
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id              : 1                       Mode                 : access
Adm                 : down                  Opr                  : down
Thres. Exceeded Cnt : 0                     Port Threshold       : 0
Thres. Last Cleared : 01/21/2014 09:00:48   Threshold Action     : down
Dynamic Cost        : false                 Encap Type           : null
Configured Address  : 36:95:ff:00:01:41     Lag-IfIndex          : 1342177281
Hardware Address    : 36:95:ff:00:01:41     Adapt Qos (access)   : distribute
Hold-time Down      : 0.0 sec               Port Type            : standard
Per-Link-Hash       : disabled              
Include-Egr-Hash-Cfg: enabled               
Per FP Ing Queuing  : disabled              Per FP Egr Queuing   : disabled
Per FP SAP Instance : disabled              
LACP                        : enabled               Mode                 : passive
LACP Transmit Intvl : fast                  LACP xmit stdby      : enabled
Selection Criteria      : highest-weight        Slave-to-partner     : disabled
Subgrp hold time    : 20.0 sec               Remaining time        : 2.6 sec
Subgrp selected       : 1                     Subgrp candidate     : 2
Subgrp count            : 2                     Forced               : -
System Id                 : 36:95:ff:00:00:00     System Priority      : 32768
Admin Key              : 32768                 Oper Key             : 32768
Prtr System Id          :                        Prtr System Priority : 0
Prtr Oper Key          : 0                     
Standby Signaling   : lacp                  
Port weight (gbps)   : (Not Specified)       
Weight Threshold    : 0                     Threshold Action     : down
...
===============================================================================
 
 
*A:Dut-A# show lag 2 associations per-link-hash sap
===============================================================================
SAP Associations
===============================================================================
SvcId      SAP                          Active Link            Oper   Oper
                                                               Class  Weight
-------------------------------------------------------------------------------
2          lag-2:4                          1/1/1               1      500
2          lag-2:5                          1/1/1               1      100
2          lag-2:6                          1/1/26              1      1000
2          lag-2:7                          1/1/25              1      1000
===============================================================================
Number of SAP associations: 4
 
A:bksim4001# show lag 1  per-link-hash         
===============================================================================
Per-link-hash Weight
===============================================================================
Port                             Class      Num Users  Agg Weight
-------------------------------------------------------------------------------
1/1/1                            1          10                      10
1/1/1                            2          0          0
1/1/1                            3          2          500
===============================================================================
Number of entries: 3
===============================================================================
Output Fields: Show LAG <lag-id> Associations

Table 106 describes the output fields for the show lag <lag-id> associations command.

Table 106:  Output Fields: Show Lag <lag-id> Associations  

Label

Description  

Service ID

The service associated with the LAG.

Name

The name of the IP interface.

Encap Val

The Dot1q or QinQ values of the port for the IP interface.

2.21.2.7. Licensing Show Command

licensing

Syntax 
licensing port-id
Context 
show
Description 

This command displays information related to the licensed limits associated with a provisioned card or MDA level.

Parameters 
port-id—
The port identifier in the format slot[/mda[/connector[/port]]].

slot

slot number

mda

MDA identifier

connector

c1 to c36

port

1 to 10

Output 

Sample output
*A:Dut-C# show licensing 2/1 
===============================================================================
Connector           MAC  Licensed  Restrictions
-------------------------------------------------------------------------------
2/1/c1              1    Yes       400 Gbps per MAC Chip
2/1/c2              1    Yes       400 Gbps per MAC Chip
2/1/c3              1    Yes       400 Gbps per MAC Chip
2/1/c4              2    Yes       400 Gbps per MAC Chip
2/1/c5              2    Yes       400 Gbps per MAC Chip
2/1/c6              2    Yes       400 Gbps per MAC Chip
2/1/c7              3    Yes       400 Gbps per MAC Chip
2/1/c8              3    Yes       400 Gbps per MAC Chip
2/1/c9              3    Yes       400 Gbps per MAC Chip
2/1/c10             4    Yes       400 Gbps per MAC Chip
2/1/c11             4    Yes       400 Gbps per MAC Chip
2/1/c12             4    Yes       400 Gbps per MAC Chip
2/1/c13             5    Yes       400 Gbps per MAC Chip
2/1/c14             5    Yes       400 Gbps per MAC Chip
2/1/c15             5    Yes       400 Gbps per MAC Chip
2/1/c16             6    Yes       400 Gbps per MAC Chip
2/1/c17             6    Yes       400 Gbps per MAC Chip
2/1/c18             6    Yes       400 Gbps per MAC Chip
2/1/c19             7    Yes       400 Gbps per MAC Chip
2/1/c20             7    Yes       400 Gbps per MAC Chip
2/1/c21             7    Yes       400 Gbps per MAC Chip
2/1/c22             8    Yes       400 Gbps per MAC Chip
2/1/c23             8    Yes       400 Gbps per MAC Chip
2/1/c24             8    Yes       400 Gbps per MAC Chip
2/1/c25             9    Yes       400 Gbps per MAC Chip
2/1/c26             9    Yes       400 Gbps per MAC Chip
2/1/c27             9    Yes       400 Gbps per MAC Chip
2/1/c28             10   Yes       400 Gbps per MAC Chip
2/1/c29             10   Yes       400 Gbps per MAC Chip
2/1/c30             10   Yes       400 Gbps per MAC Chip
2/1/c31             11   Yes       400 Gbps per MAC Chip
2/1/c32             11   Yes       400 Gbps per MAC Chip
2/1/c33             11   Yes       400 Gbps per MAC Chip
Output Fields

Table 107 describes the output fields for the show licensing command.

Table 107:  Output Fields: Show Licensing 

Label

Description  

Connector

The identity of connector for the license limits

MAC

The index of the MAC on the card or MDA to which the connector is attached.

Licensed

Whether or not the connector is licensed.

Yes — the connector is included in the licensed level of the card or MDA and may be configured for a breakout. Other rules may apply as described in the restrictions field.

No — this connector is not included in the licensed level of the card or MDA and it cannot be configured for breakout.

Restrictions

Additional license rules that may apply to the use of the connector, for example, bandwidth limits to the set of connectors on the same MAC.

2.21.2.8. MACsec Show Commands

macsec

Syntax 
macsec
Context 
show
Description 

This command displays MACsec information.

connectivity-association

Syntax 
connectivity-association [ca-name] [detail]
Context 
show>macsec
Description 

This command displays MACsec specific CA information.

Parameters 
ca-name
Displays CA name information up to 256 characters in length.
detail—
Displays MACsec CA detailed information.
Output 
Sample Output: show macsec connectivity-association
A:Dut-C# show macsec connectivity-association 
===============================================================================
ca-name            : dut_B_C_128_01
ca-name            : dut_B_C_256_01
ca-name            : dut_B_C_128_xpn_01
ca-name            : dut_B_C_256_xpn_01
ca-name            : to_Juniper_1_1_2__1
ca-name            : abcdefghijklmnoprstuvxyz@!
===============================================================================
Output Fields: show macsec connectivity-association

Table 108 describes the output fields for the show macsec connectivity-association command.

Table 108:  Output Fields: show macsec connectivity-association 

Label

Description

ca-name

Specifies the CA name.

Sample Output: show macsec connectivity-association <ca-name>
A:Dut-C# show macsec connectivity-association "abcdefghijklmnoprstuvxyz@!" 
===============================================================================
Connectivity Association "abcdefghijklmnoprstuvxyz@!"
===============================================================================
Admin State        : Up
Description        : alsfjalsfjafja;lsjflasjflasjfl
Replay Protection  : Disabled
Replay Window Size : 333
Macsec Encrypt     : Enabled
Clear Tag Mode     : dual-tag
Cipher Suite       : gcm-aes-256
Encryption Offset  : 30
Assigned ports     : 2/1/9 2/1/10 
-------------------------------------------------------------------------------
Static Cak
-------------------------------------------------------------------------------
MKA Key Server Priority      : 16
Active Pre-Shared-Key Index  : 1
Active Pre-Shared-Key CKN    : aabbccddeeff00112233445566778899
===============================================================================
Output Fields: show macsec connectivity-association <ca-name>

Table 109 describes the output fields for the show macsec connectivity-association <ca-name> command.

Table 109:  Output Fields: show macsec connectivity-association <ca-name>  

Label

Description

Admin State

Up — The CA is administratively up.

Down — The CA is administratively down.

If port <x/y/z> ethernet>macsec is shutdown, the admin state will be down. Otherwise, the admin state is up.

Description

Specifies a user description for this CA.

Replay Protection

Enabled — Replay Protection is enabled.

Disabled — Replay Protection is disabled.

If replay protection is enabled for this CA, the out of window packet will be discarded.

Replay Window Size

Specifies the size, in packets, of the replay window.

Macsec Encrypt

Enabled — MACsec is enabled.

Disabled — MACsec is disabled.

Clear Tag Mode

Specifies the clear tag mode: single-tag, dual-tag.

Cipher Suite

Specifies the cipher suite used for encrypting the SAK: gcm-aes-128, gcm-aes-256, gcm-aes-xpn-128, gcm-aes-xpn-256.

Encryption Offset

Specifies the encryption offset configured on this node: 0, 30, 50.

Assigned ports

Specifies all ports that contain this CA.

MKA Key Server Priority

Specifies the MKA key server priority: 0-255 (default 16).

Active Pre-Shared Key Index

Specifies the active pre-shared key index: 1-2 (default 1).

Active Pre-Shared Key CKN

Specifies the active PSK CAK name.

Sample Output: show macsec connectivity-association <ca-name> detail
A:Dut-C# show macsec connectivity-association "abcdefghijklmnoprstuvxyz@!" detail 
===============================================================================
Connectivity Association "abcdefghijklmnoprstuvxyz@!"
===============================================================================
Admin State        : Up
Description        : alsfjalsfjafja;lsjflasjflasjfl
Replay Protection  : Disabled
Replay Window Size : 333
Macsec Encrypt     : Enabled
Clear Tag Mode     : dual-tag
Cipher Suite       : gcm-aes-256
Encryption Offset  : 30
Assigned ports     : 2/1/9 2/1/10 
-------------------------------------------------------------------------------
Static Cak
-------------------------------------------------------------------------------
MKA Key Server Priority      : 16
Active Pre-Shared-Key Index  : 1
Active Pre-Shared-Key CKN    : aabbccddeeff00112233445566778899
===============================================================================

mka-session

Syntax 
mka-session [port port-id]
mka-session [port port-id] detail
mka-session [port port-id] statistics
Context 
show>macsec
Description 

This command displays MACsec MKA session information.

Parameters 
port-id—
Specifies the port ID, up to 17characters.
detail—
Displays MACsec MKA session detailed information.
statistics—
Displays MACsec MKA session statistical information.
Output 
Sample Output: show macsec mka-session port
A:Dut-C# show macsec mka-session port 2/1/11 
===============================================================================
MKA Session for port 2/1/11
===============================================================================
Port               : 2/1/11
Security Zone      : 3
===============================================================================
===============================================================================
Live Peer List
===============================================================================
Member Identifier             Mesg Num  Rx-SCI                      KS priority
-------------------------------------------------------------------------------
bf4102704294fa1057022bdf      28322     a47b2ce112ef0000            16
===============================================================================
===============================================================================
Potential Peer List
===============================================================================
Member Identifier             Mesg Num  Rx-SCI                      KS priority
-------------------------------------------------------------------------------
===============================================================================
Output Fields: show macsec mka-session port

Table 110 describes the output fields for the following show macsec mka-session port command.

Table 110:  Output Fields: show macsec mka-session port 

Label

Description

MKA Session for port

Display the MKA session for the current port

Port

Specifies the MKA session current port.

Security Zone

Specifies Security Zone does this port belongs to.

Live Peer List

Specifies Peers (Participants) which have provided their MI and MN via KMA. The peer entry is in the Live Peer List.

Member Identifier

Specifies the MI of the peer entry.

Mesg Num

Specifies the latest Member Number of the peer entry.

Rx-SCI

Specifies the Peer Rx-SCI.

KS-priority

Specifies the Peer Key server priority.

Potential Peer List

Peers (Participants) which have Potential Peers List includes all the other peers that have transmitted an MKPDU that has been directly received by the participant or that were included in the Live Peers List of a MKPDU transmitted by a peer that has proved liveness, an MKA PDU. The peer entry is in the Potential Peer List.

Sample Output: show macsec mka-session port detail
A:Dut-C# show macsec mka-session port 2/1/11 detail 
===============================================================================
MKA Session for port 2/1/11
===============================================================================
Port               : 2/1/11
Security Zone      : 3
MKA Oper State     : unknown value
Oper Cipher Suite  : unknown value
Oper Encrypt Offset: 0
CAK Name           : 11223344556677889900aabbccddeeff11223344556677889900aabbc*
MKA Member ID      : f134218784b114eb61dbe834
Transmit Interval  : 2000
Outbound SCI       : a4:7b:2c:e1:12:8f
Message Number     : 28298
Key Number         : 878
Key Server         : yes
Key Server Priority: 16
Latest SAK AN      : 3
Latest SAK KI      : f134218784b114eb61dbe8340000036d
Previous SAK AN    : 2
Previous SAK KI    : f134218784b114eb61dbe83400000000
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Live Peer List
===============================================================================
Member Identifier             Mesg Num  Rx-SCI                      KS priority
-------------------------------------------------------------------------------
bf4102704294fa1057022bdf      28323     a47b2ce112ef0000            16
===============================================================================
===============================================================================
Potential Peer List
===============================================================================
Member Identifier             Mesg Num  Rx-SCI                      KS priority
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
MKA Session Statistics for port 2/1/11
===============================================================================
Peer Removed Due to Timeout  : 0
CKN Not Found                : 0
New Live peer                : 0
SAK Generated by Server      : 0
SAK Installed for TX         : 0
SAK Installed for RX         : 0
PDU Too Small                : 0
PDU Too Big                  : 0
PDU Not Quad Size            : 0
PDU Message Number Invalid   : 0
PDU Param Set Size Invalid   : 0
PDU Liveness Check Fail      : 0
Param Set Not Quad Size      : 0
Unsupported Agility          : 0
Invalid CAK Name Length      : 0
ICV Check Failed             : 0
Peer Using Same MID          : 0
SAK From Non-Live Peer       : 0
SAK From Non-Key Server      : 0
SAK Decrypt Fail             : 0
SAK Encrypt Fail             : 0
Key Number Invalid           : 0
SAK Installation Failed      : 0
CAK Info Missing             : 0
Max Peers Set as Zero        : 0      
===============================================================================
Output Fields: show macsec mka-session port detail

Table 111 describes the output fields for the following commands:

  1. show macsec mka-session port
  2. show macsec mka-session detail
  3. show macsec mka-session statistics
Table 111:  Output Fields: show macsec mka-session port detail 

Label

Description

MKA Oper State

Specifies the operational state of the MKA participant on this port. The operational MKA state will be up if MKA hellos are received on this port and have a valid session.

Oper Cipher Suite

Specifies the operational encryption algorithm used for datapath PDUs when all parties in the CA have the (SAK). This value is specified by the key server:gcm-aes-128, gcm-aes-256, gcm-aes-xpn-128, gcm-aes-xpn-256.

Oper Encrypt Offset

Specifies the operational encryption offset used for the datapath PDUs when all parties in the CA have the SAK. This value is specified by the key server: 0, 30, 50.

CAK Name

Specifies the name of the CAK in use by this MKA which is used to find the correct CAK.

MKA Member ID

Specifies indicates the Member Identifier (MI) for the MKA instance.

Transmit Interval

Specifies the time interval (in ms) at which the MKA broadcasts its liveliness to its peers and is non-configurable.

Outbound SCI

Specifies the Secure Channel Identifier (SCI) information for transmitting MACsec frames and consists of the outgoing port MAC Address and a port identifier.

Message Number

Specifies the current count of MKA messages that is attached to MKA PDUs.

Key Number

Specifies the number of the currently assigned CAK. When a new CAK is generated, this number is incremented. A SAK is identified by 128-bit Key Identifier (KI) and 32-bit Key-Number (KN).

Key Server

Specifies whether this server is the highest priority server in the peer group: no, yes.

Key Server Priority

Specifies the priority of the active key server: 0-255 (default 16).

Latest SAK AN

Specifies the Association Number (AN) of the latest Secure Association Key (SAK). This number is concatenated with an SCI to identify a Secure Association (SA). In SR OS, only 2 SAKs are supported.

Latest SAK KI

Specifies the Key Identifier (KI) of the latest SAK. This number is derived from the MI of the key server and the key number.

Previous SAK AN

Specifies the AN of the previous SAK. This number is concatenated with an SCI to identify an SA.

Previous SAK KI

Specifies the KI of the previous SAK. This number is derived from the MI of the key server and the key number.

Peer Removed Due to Timeout

Specifies the number of peers removed from the live/potential peer list due to not receiving an MKPDU within the MKA Live Time (6.0 seconds) and is not configurable.

CKN Not Found

Specifies the number of MKPDUs received with a CKN that does not match the CA configured for the port.

New Live Peer

Specifies the number of validated peers that have been added to the live peer list.

SAK Generated by Server

Specifies the number of SAKs generated by this MKA instance.

SAK Installed for TX

Specifies the number of SAKs installed for transmitting.

SAK Installed for RX

Specifies the number of SAKs installed for receiving.

PDU Too small

Indicates that the number of MKPDUs received that are less than 32 octets.

PDU Too big

Indicates the number of MKPDUs received where the EAPOL header indicates a size larger than the received packet.

PDU Not Quad Size

Indicates the number of MKPDUs received with a size that is not a multiple of 4 octets long.

PDU Message Number Invalid

Indicates the number of MKPDUs received out of order as indicated by the Message Number.

PDU Param Set Size Invalid

Indicates the number of MKPDUs received which contain a parameter set body length that exceeds the remaining length of the MKPDU.

PDU Liveness Check Fail

Indicates the number of MKPDUs received which contain an MN that is not acceptably recent.

Param Set Not Quad Size

Indicates the number of MKPDUs received which contain a parameter set that is not a multiple of 4 octets long.

Unsupported Agility

Indicates the number of MKPDUs received which contain an unsupported Algorithm Agility value.

Invalid CAK Name Length

Indicates the number of MKPDUs received which contain a CAK name that exceeds the maximum CAK name length.

ICV Check Failed

Indicates the number of MKPDUs received which contain an ICV value that does not authenticate.

Peer Using Same MID

Indicates the number of MKPDUs received which contain a peerlist with an MI entry which conflicts with the local MI.

SAK From Non-Live Peer

Indicates the number of SAKs received from peer that is not a member of the Live Peers List.

SAK From Non-Key Server

Indicates the number of SAKs received from an MKA participant that has not been designated as the Key Server. Only the key server should distribute SAK.

SAK Decrypt Fail

Indicates the number of AES Key Wrap SAK decryption failures that have occurred.

SAK Encrypt Fail

Indicates the number of AES Key Wrap SAK encryption failures that have occurred.

Key Number Invalid

Indicates the number of SAKs received with an invalid Key Number.

SAK Installation Failed

Indicates the number of Secy SAK installation failures that have occurred.

CAK Info Missing

Indicates the number of times internal CAK data is not available for the generation of the SAK.

Max Peers Set as Zero

Indicates the number of Secy SAK installations that have failed due to the max peer entry being set to 0.

Sample Output: show macsec mka-session detail
A:Dut-C# show macsec mka-session detail
===============================================================================
MKA Session for port 2/1/11
===============================================================================
Port               : 2/1/11
Security Zone      : 3
MKA Oper State     : unknown value
Oper Cipher Suite  : unknown value
Oper Encrypt Offset: 0
CAK Name           : 11223344556677889900aabbccddeeff11223344556677889900aabbc*
MKA Member ID      : f134218784b114eb61dbe834
Transmit Interval  : 2000
Outbound SCI       : a4:7b:2c:e1:12:8f
Message Number     : 28285
Key Number         : 878
Key Server         : yes
Key Server Priority: 16
Latest SAK AN      : 3
Latest SAK KI      : f134218784b114eb61dbe8340000036d
Previous SAK AN    : 2
Previous SAK KI    : f134218784b114eb61dbe83400000000
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Live Peer List
===============================================================================
Member Identifier             Mesg Num  Rx-SCI                      KS priority
-------------------------------------------------------------------------------
bf4102704294fa1057022bdf      28310     a47b2ce112ef0000            16
===============================================================================
===============================================================================
Potential Peer List
===============================================================================
Member Identifier             Mesg Num  Rx-SCI                      KS priority
-------------------------------------------------------------------------------
===============================================================================
===============================================================================
MKA Session Statistics for port 2/1/11
===============================================================================
Peer Removed Due to Timeout  : 0
CKN Not Found                : 0
New Live peer                : 0
SAK Generated by Server      : 0
SAK Installed for TX         : 0
SAK Installed for RX         : 0
PDU Too Small                : 0
PDU Too Big                  : 0
PDU Not Quad Size            : 0
PDU Message Number Invalid   : 0
PDU Param Set Size Invalid   : 0
PDU Liveness Check Fail      : 0
Param Set Not Quad Size      : 0
Unsupported Agility          : 0
Invalid CAK Name Length      : 0
ICV Check Failed             : 0
Peer Using Same MID          : 0
SAK From Non-Live Peer       : 0
SAK From Non-Key Server      : 0
SAK Decrypt Fail             : 0
SAK Encrypt Fail             : 0
Key Number Invalid           : 0
SAK Installation Failed      : 0      
CAK Info Missing             : 0
Max Peers Set as Zero        : 0
 
===============================================================================
Sample Output: show macsec mka-session statistics
A:Dut-C# show macsec mka-session statistics
===============================================================================
MKA Session Statistics for port 2/1/11
===============================================================================
Peer Removed Due to Timeout  : 0
CKN Not Found                : 0
New Live peer                : 0
SAK Generated by Server      : 0
SAK Installed for TX         : 0
SAK Installed for RX         : 0
PDU Too Small                : 0
PDU Too Big                  : 0
PDU Not Quad Size            : 0
PDU Message Number Invalid   : 0
PDU Param Set Size Invalid   : 0
PDU Liveness Check Fail      : 0
Param Set Not Quad Size      : 0
Unsupported Agility          : 0
Invalid CAK Name Length      : 0
ICV Check Failed             : 0
Peer Using Same MID          : 0
SAK From Non-Live Peer       : 0
SAK From Non-Key Server      : 0
SAK Decrypt Fail             : 0
SAK Encrypt Fail             : 0
Key Number Invalid           : 0
SAK Installation Failed      : 0
CAK Info Missing             : 0
Max Peers Set as Zero        : 0
===============================================================================

2.21.2.9. Monitor Commands

card

Syntax 
card slot-number fp fp-number ingress {access | network} queue-group queue-group-name instance instance-id [interval seconds] [repeat repeat] policer policer-id [absolute | percent-rate [reference-rate]]
Context 
monitor
Description 

This command monitors card parameters.

Parameters 
slot-number—
Specifies the slot number associated with the queue group, expressed as an integer.
Values—
1 to 10

 

fp-number—
Specifies the FP number associated with the queue group, expressed asan integer.
Values—
1, 2

 

ingress—
Displays policer statistics applied on the ingress FP.
access—
Displays policer statistics on the FP access.
network—
Displays policer statistics on the FP network.
queue-group-name—
Specifies the queue group name up to 32 characters.
instance-id—
Specifies the identification of a specific instance of the queue group.
Values—
1 to 65535

 

seconds—
Configures the interval for each display in seconds.
Values—
11 to 60

 

Default—
11
repeat—
Configures how many times the command is repeated.
Values—
1 to 999

 

Default—
10
policer-id—
Must exist within the queue-group template applied to the ingresscontext of the forwarding plane.
Values—
1 to 32

 

absolute—
Specifies the raw statistics to display, without processing. No calculations are performed on the delta or rate statistics.
percent-rate—
Specifies the rate-per-second for each statistic is displayed based on the referencerate of 10G.
reference-rate—
Rate-per-second for each statistic is displayed as a percentage basedon the reference rate specified.
Values—
100M, 1G, 10G, 40G, 100G, 400G

 

Default—
10G

port

Syntax 
port port-id [port-id] [interval seconds] [repeat repeat] [absolute | rate] [multiclass]
Context 
monitor
Description 

This command enables port traffic monitoring. The specified port(s) statistical information displays at the configured interval until the configured count is reached.

The first screen displays the current statistics related to the specified port(s). The subsequent statistical information listed for each interval is displayed as a delta to the previous display.

When the rate is specified, the "rate per second" for each statistic is displayed instead of the delta.

Monitor commands are similar to show commands but only statistical information displays. Monitor commands display the selected statistics according to the configured number of times at the interval specified.

Parameters 
port-id
Specify up to 5 port IDs. Port-IDs are only MLPPP bundles or bundle protection groups when the multiclass is specified.

port-id

slot/mda/port [.channel]

eth-sat-id

esat-id/slot/port

esat

keyword

id

1 to 20

pxc-id

pxc-id.sub-port

pxc

keyword

id

1 to 64

sub-port

a, b

aps-id

aps-group-id[.channel]

aps

keyword

group-id

1 to 64 (16 for 7750 SR-c12 and 7750 SR-c4)

bundle ID

bundle-type-slot/mda.bundle-num

bundle

keyword

type

ima, ppp

bundle-num

1 to 128 (16 for 7750 SR-c12 and 7750 SR-c4)

bpgrp-type-bpgrp-num

seconds
Configures the interval for each display in seconds.
Values—
3 to 60

 

Default—
10 seconds
repeat
Configures how many times the command is repeated.
Values—
1 to 999

 

Default—
10
absolute—
When the absolute is specified, the raw statistics are displayed, without processing. No calculations are performed on the delta or rate statistics.
rate —
When the rate is specified, the rate-per-second for each statistic is displayed instead of the delta.
Output 

The following output is an example of port multiclass information.

Sample Output
A:ALA-12>monitor# port 2/1/4 interval 3 repeat 3 absolute
===============================================================================
Monitor statistics for Port 2/1/4
===============================================================================
                                             Input                      Output
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Octets                                           0                           0
Packets                                         39                         175
Errors                                           0                           0
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Octets                                           0                           0
Packets                                         39                         175
Errors                                           0                           0
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Octets                                           0                           0
Packets                                         39                         175
Errors                                           0                           0
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Octets                                           0                           0
Packets                                         39                         175
Errors                                           0                           0
===============================================================================
A:ALA-12>monitor# 
 
A:ALA-12>monitor# port 2/1/4 interval 3 repeat 3 rate
===============================================================================
Monitor statistics for Port 2/1/4
===============================================================================
                                             Input                      Output
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Octets                                           0                           0
Packets                                         39                         175
Errors                                           0                           0
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Rate)
-------------------------------------------------------------------------------
Octets                                           0                           0
Packets                                          0                           0
Errors                                           0                           0
Bits                                             0                           0
Utilization (% of port capacity)              0.00                        0.00
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Rate)
-------------------------------------------------------------------------------
Octets                                           0                           0
Packets                                          0                           0
Errors                                           0                           0
Bits                                             0                           0
Utilization (% of port capacity)              0.00                        0.00
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Rate)
-------------------------------------------------------------------------------
Octets                                           0                           0
Packets                                          0                           0
Errors                                           0                           0
Bits                                             0                           0
Utilization (% of port capacity)              0.00                        0.00
===============================================================================
A:ALA-12>monitor#
 
 
===============================================================================
*A:Cpm-A> monitor port bundle-fr-1/1.1
===============================================================================
Monitor statistics for Port bundle-fr-1/1.1
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
--------------------------------------------------------------------------------
Octets                                                 0                      0
Packets                                                0                      0
Errors                                                 0                      0

port

Syntax 
port all-ethernet-rates [interval seconds] [repeat repeat]
Context 
monitor
Description 

This command enables port traffic monitoring and utilization output for all data Ethernet ports enabled in the system, in a table output format. The specified port(s) statistical information displays at the configured interval until the configured count is reached.

The first screen displays the current statistics related to the specified port(s). The subsequent statistical information listed for each interval is displayed as a delta to the previous display.

Monitor commands are similar to show commands but only statistical information displays. Monitor commands display the selected statistics according to the configured number of times at the interval specified.

Parameters 
seconds
Configures the interval for each display in seconds.
Values—
3 to 60

 

Default—
10 seconds
repeat
Configures how many times the command is repeated.
Values—
1 to 999

 

Default—
10
Output 

The following output is an example of port Ethernet information.

Sample Output
A:ALA-12>monitor# port all-ethernet-rates interval 3 repeat 100
===============================================================================
Monitor statistics for all Ethernet Port Rates
===============================================================================
Port-Id          D                 Bits   Packets     Errors    Util
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
5/1/1            I                0        0          0          0.00
                 O                0        0          0          0.00
                                                                     
5/2/1            I                0        0          0          0.00
                 O                0        0          0          0.00
                                                                     
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Rate)
-------------------------------------------------------------------------------
5/1/1            I                0        0          0          0.00
                 O                0        0          0          0.00
                                                                     
5/2/1            I                0        0          0          0.00
                 O                0        0          0          0.00
                                                                     
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Rate)
-------------------------------------------------------------------------------
5/1/1            I                0        0          0          0.00
                 O                0        0          0          0.00
                                                                     
5/2/1            I                0        0          0          0.00
                 O                0        0          0          0.00
                                                                     
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Rate)
-------------------------------------------------------------------------------
5/1/1            I       4286480384   697669          0         43.98
                 I       4286382080   697653          0         43.98
 
5/2/1            I       4254070784   692394          0         43.64
                 I       4253952000   692375          0         43.64
-------------------------------------------------------------------------------
At time t = 12 sec (Mode: Rate)
-------------------------------------------------------------------------------
5/1/1            I       9746288640    1586K          0         99.99
                 I       9746216960    1586K          0         99.99
 
5/2/1            I       9746280448    1586K          0         99.99
                 I       9746167808    1586K          0         99.99
===============================================================================
A:ALA-12>monitor# 
 

port

Syntax 
port port-id [port-id] [interval seconds] [repeat repeat] [absolute | rate] [multiclass]
port port-id [port-id] atm [aal-5 | cp cp-id | ilmi | interface-connection | pvc vpi/vci [aal-5 | oam] | pvp vpi [ aal-5 | oam | pvt vpi1.vpi2] [interval seconds] [repeat repeat] [absolute | rate]
port all-ethernet-rates [interval seconds] [repeat repeat]
Context 
monitor
Description 

This command enables port traffic monitoring. Various keywords can be used to monitor specific attributes of the ATM port. The specified port(s) statistical information displays at the configured interval until the configured count is reached.

The first screen displays the current statistics related to the specified port(s). The subsequent statistical information listed for each interval is displayed as a delta to the previous display.

When the rate is specified, the "rate per second" for each statistic is displayed instead of the delta.

Monitor commands are similar to show commands but only statistical information displays. Monitor commands display the selected statistics according to the configured number of times at the interval specified.

Parameters 
port-id
Specifies up to 5 port IDs. Port-IDs are only MLPPP bundles or bundle protection groups when the multiclass is specified.

port-id

slot/mda/port [.channel]

bundle-id

bundle-type-slot/mda.bundle-num

bundle

keyword

type

ima, fr, ppp

bundle-num

1 to 336

bgrp-id

bpgrp-type-bpgrp-num

bgrp

keyword

type

ima, ppp

bgrp-num

1 to 2000

aps-id

aps-group-id[.channel]

aps

keyword

group-id

1 to 64 (16 for 7750 SR-c12 and 7750 SR-c4)

seconds
Configures the interval for each display in seconds.
Values—
3 to 60

 

Default—
10 seconds
repeat
Configures how many times the command is repeated.
Values—
1 to 999

 

Default—
10
absolute—
When the absolute is specified, the raw statistics are displayed, without processing. No calculations are performed on the delta or rate statistics.
rate —
When the rate is specified, the rate-per-second for each statistic is displayed instead of the delta.
atm—
Monitors ATM statistics.
aal-5—
Monitors the AAL-5 statistics for the port.
cp-id—
Monitors ATM connection profile statistics.
Values—
1 to 8000

 

ilmi—
Monitors ATM ILMI statistics.
interface-connection—
Monitors ATM interface connection statistics.
pvc vpi/vci—
Monitors ATM PVC statistics.
Values—
vpi -[0 to 4095] (NNI)
[0 to 255] (UNI)
vci - [1|2|5 to 65535]

 

pvp vpi—
Monitors ATM PVP statistics
Values—
vpi [0 to 4095] (NNI) [0 to 255] (UNI)

 

pvt vpi1.vpi2—
Monitors ATM PVT statistics.
Values—
[0 to 4095].[0 to 4095] (NNI)[0 to 255].[0 to 255] (UNI)

 

oam—
Monitors ATM PVC/PVP OAM statistics.
Output 

The following output is an example of port ATM information.

Sample Output
A:ALA-49# monitor port 9/1/1 atm interval 3 repeat 2 absolute
===============================================================================
Monitor ATM statistics for Port 9/1/1
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Octets                                                 0                      0
Cells                                                  0                      0
Unknown VPI/VCI Cells                                  0
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Octets                                                 0                      0
Cells                                                  0                      0
Unknown VPI/VCI Cells                                  0
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Octets                                                 0                      0
Cells                                                  0                      0
Unknown VPI/VCI Cells                                  0
===============================================================================
A:ALA-49#

queue-group

Syntax 
queue-group queue-group-name egress access [instance instance-id] [egress-queue egress-queue-id] [interval seconds] [repeat repeat] [absolute | rate]
queue-group queue-group-name ingress access ingress-queue ingress-queue-id [interval seconds] [repeat repeat] [absolute | rate]
queue-group queue-group-name egress network instance instance-id [policer policer-id] [egress-queue egress-queue-id] [interval seconds] [repeat repeat] [absolute | rate]
Context 
monitor>port
Description 

This command enables queue-group monitoring for the specified parameters.

Parameters 
queue-group-name—
Specifies the name of the queue-group up to 32 characters.
access—
Specifies the access type.
Values—
access

 

network—
Specifies the network type.
Values—
network

 

instance-id—
Specifies the identification of a specific instance of the queue group.
Values—
1 to 65535

 

policer-id—
The specified policer ID must exist within the queue-group templateapplied to the ingress context of the forwarding plane.
Values—
1 to 8

 

egress-queue-id—
Monitors statistics fir this queue.
Values—
1 to 8

 

ingress-queue-id—
Monitors statistics for this queue.
Values—
1 to 32

 

seconds—
Configures the interval for each display, in seconds.
Values—
11 to 60

 

Default—
11
repeat—
Configures how many times the command is repeated.
Values—
1 to 999

 

Default—
10
absolute—
When the absolute keyword is specified, the raw statistics are displayed,without processing. No calculations are performed on the delta or rate statistics.
rate—
When the rate keyword is specified, the rate-per-second for each statistic isdisplayed instead of the delta.

vport

Syntax 
vport name [interval seconds] [repeat repeat] [absolute | rate]
vport name [interval seconds] [repeat repeat] monitor-threshold
Context 
monitor>port
Description 

This command monitors Vport statistics.

Parameters 
name—
specifies the Vport name up to 32 characters.
seconds—
Configures the interval for each display, in seconds.
Values—
11 to 60

 

repeat—
Configures how many times the command is repeated.
Values—
1 to 999

 

absolute—
When the absolute keyword is specified, the raw statistics are displayed,without processing. No calculations are performed on the delta or rate statistics.
rate—
When the rate keyword is specified, the rate-per-second for each statistic isdisplayed instead of the delta.
monitor-threshold—
Displays the exceed count for the port-scheduler under Vport (ifspecified) or for a physical port.

2.21.2.10. Clear Commands

card

Syntax 
card slot-number
card slot-number fp fp-number dist-cpu-protection
card slot-number soft [hard-reset-unsupported-mdas]
card slot-number fp fp-number fwd-engine drop-reason statistics
card slot-number fp fp-number ingress mode {access | network} queue-group group-name instance instance statistics
Context 
clear
Description 

This command re-initializes the card in the specified slot. A clear card command (without the soft) is referred to as a Hard Reset. A clear card x soft command (with the soft) is referred to as a Soft Reset.

Parameters 
slot-number—
Clears information for the specified card slot.
Values—
1 to 20, A, B, C, D

 

fp-number—
Displays information for the specified forwarding plane.
Values—
1 to 6

 

dist-cpu-protection—
Clears the distributed CPU protection information.
soft—
Issues a soft reset of the I/O module (IOM).
hard-reset-unsupported-mdas—
Allows a soft reset operation when some of the MDA’s cannot perform a soft reset. A soft reset is performed on MDAs that support a soft reset and a hard reset is performed on MDAs that do not support soft resets.
fwd-engine—
Specifies to clear the forwarding engine information.
drop-reason—
Specifies to clear the drop reason information.
statistics—
Specifies to clear the statistics.
ingress—
Specifies to clear the ingress queue group information.
mode—
Specifies the mode in which the card is to operate.
access—
Specifies to clear the access mode information.
network—
Specifies to clear the network mode information.
group-name—
Specifies the group name, to a maximum of 32 characters.
instance—
Specifies the instance of the named queue group to be cleared.
Values—
1 to 65535

 

lag

Syntax 
lag lag-id statistics
lag lag-id bfd-session family {ipv4 | ipv6} lag-port port-id
Context 
clear
Description 

This command clears statistics for the specified LAG ID.

Parameters 
lag-id—
Specifies the LAG ID.
Values—
1 to 800

 

statistics—
Specifies to clear statistics or the BFD session for the specified LAG ID.
bfd-session—
Specifies to clear a BFD session.
family—
Specifies the IP address family.
ipv4—
Specifies IPv4.
ipv6—
Specifies IPv6.
port-id—
Specifies the port ID.
Values—
slot [/mda [/port]]

 

mda

Syntax 
mda mda-id [statistics]
Context 
clear
Description 

This command reinitializes the specified MDA in a particular slot.

Parameters 
mda-id—
Clears the specified slot and MDA/CMA.
Values—
slot/mda
slot: 1 to 10
mda: 1, 2

 

statistics—
Clears statistics for the specified MDA.

port

Syntax 
port {port-id | bundle-id | bpgrp-id | aps-id} atm
port port-id atm cp [cp] statistics
port port-id atm ilmi statistics
port port-id atm interface-connection statistics
port port-id atm pvc [vpi[/vci]] statistics
port port-id atm pvp [vpi] statistics
port port-id atm pvt [vpi1.vpi2] statistics
port {port-id | bundle-id | bpgrp-id | aps-id} statistics
port port-id ethernet dampening
port port-id ethernet efm-oam events [local | remote]
port port-id exp-secondary-shaper shaper-name statistics
port port-id fwd-engine drop-reason statistics
port port-id monitor-threshold
port port-id hs-secondary-shaper shaper-name statistics
port port-id hs-pool high-water-mark {[standard 1..6] | [alternate 1..6]}
port port-id phys-state-change-count
port port-id queue-group queue-group-name [instance instance-id] queue-depth [queue queue-id] {ingress | egress} [access | network]
port port-id queue-group queue-group-name [instance instance-id] [access | network] {ingress | egress} statistics
port port-id vport [name] monitor-threshold
port port-id vport name statistics
Context 
clear
Description 

This command clears port statistics for the specified ports.

Parameters 
port-id—
Specifies the physical port identifier.
Values—
slot [/mda[/port]] or slot/mda/port [.channel]]

 

bundle-id—
Specifies the multilink bundle identifier.
Values—

bundle-type-slot/mda.bundle-num

bundle

keyword

type

ima, fr, ppp

bundle-num

1 to 336

 

bpgrp-id—
Specifies the bundle protection group identifier.

bpgrp-type-bpgrp-num

bgrp

keyword

type

ima, ppp

bgrp-num

1 to 2000 (256 for 7750 SR-c12 and 7750 SR-c4)

aps-id—
Specifies the APS group identifier.

aps-group-id[.channel]

aps

keyword

group-id

1 to 64 (16 for 7750 SR-c12 and 7750 SR-c4)

statistics—
Specifies that port statistics will be cleared.
atm—
Specifies that ATM port statistics will be cleared.
cp—
Clears Connection Profile statistics.
Values—
1 to 8000

 

interface-connection—
Clears interface-connection statistics.
ilmi—
Clears ILMI information. This parameter is only applicable for ports/bundles that support ILMI.
pvc—
Clears PVC statistics.
vpi—
Specifies the ATM network virtual path identifier (VPI) for this PVC.
Values—
0 to 4095 (NNI)
0 to 255 (UNI)

 

vci—
Specifies the ATM network virtual channel identifier (VCI) for this PVC.
Values—
[1, 2, 5 to 65535] 1

 

pvp—
Clears PVP statistics.
vpi—
Specifies the ATM network virtual path identifier (VPI) for this PVP.
Values—
0 to 4095 (NNI)
0 to 255 (UNI)

 

pvt—
Clears PVT statistics.
vpi—
Specifies the ATM network virtual path identifier (VPI) for this PVT.
Values—
[0 to 4095].[0 to 4095] (NNI)
[0 to 255].[0 to 255] (UNI)

 

slot—
Specifies the slot number.
Values—
1 to10

 

mda—
The MDA number.
Values—
1, 2
MDA: 7750 SR-c12: 1, 3, 5, 7, 9, 11
CMA: 7750 SR-c12: 1 to 12

 

Default—
All MDAs
port-connection—
Clears port-connection statistics.
phys-state-change-count—
Clears the counter that tracks physical port state transitions for ethernet ports ("Phys State Chng Cnt" in "show port" output, or tmnxPortPhysStateChangeCount in the TIMETRA-PORT-MIB).
queue-group-name
Clears the specified port queue group name. It uniquely identifies a port ingress queue group in the managed system up to 32 characters.
instance-id—
Specifies the specific instance of a queue group
Values—
1 to 65535

 

ingress—
Clears ingress queue group information.
egress—
Clears egress queue group information.
access—
Clears access mode statistics for the queue group.
network—
Clears network mode statistics for the queue group.
ethernet—
Specifies an Ethernet port will have the clear functions executed.
dampening—
Clears the current accumulated penalties of the exponential port dampening feature for the port. The accumulated penalties can be cleared only with this command keyword.
efm-oam—
Clears efm-oam statistics on the port.
events—
Specifies an efm-oam event will be cleared.
local —
Specifies that only local EFM OAM events will be cleared.
remote —
Specifies that only remote (received from peer) events will be cleared. Local and remote is not specified.
Default—
Without specifying an option, both local and remote are cleared.
shaper-name—
Clears information about the specified shaper name up to 32 characters.
name—
Clears information about the specified Vport name up to 32 characters.
Output 

The following output is an example of port information.

Sample Output
A:SR12# clear port 3/1/1 atm  
  - atm
 
      cp              - Clear Connection Profile statistics
      ilmi            - Clear ILMI statistics
      interface-conn* - Clear interface-connection statistics
      pvc             - Clear PVC statistics
      pvp             - Clear PVP statistics
      pvt             - Clear PVT statistics
 
A:SR12# clear port 3/1/1 atm cp 
  - cp [<cp>] statistics
 
 <cp>                 : [1..8000]
 <statistics>         : 

2.21.2.11. Tools Commands

aps

Syntax 
aps aps-id [clear]
aps mc-aps-signaling [clear]
aps mc-aps-ppp [clear]
Context 
tools>dump>aps
Description 

This command displays Automated Protection Switching (APS) information.

Parameters 
aps-id—
Specifies the APS ID.
Values—
aps-group-id
aps: keyword
group-id: 1 to 64

 

clear—
Removes all Automated Protection Switching (APS) operational commands.
mc-aps-signaling—
Displays multi-chassis APS signaling information.
mc-aps-ppp—
Displays multi-chassis APS PPP information.
Output 

The following output is an example of APS information.

Sample Output
*A:AS_SR7_2# tools dump aps aps-33    
 
GrpId = 33, state = Running, mode:cfg/oper = Bi-directional/Bi-directional
   revert = 0, workPort: N/A, protPort: 2/1/1, activePort: working
   rxK1 = 0x0 (No-Req on Protect), physRxK1 = 0x0, rxK2 = 0x5
   txK1 = 0x0 (No-Req on Protect), physTxK1 = 0x0, txK2 = 0x5
   K1ReqToBeTxed = 0x0, K1ChanToBeTxed = 0x0, lastRxReq = 0xc
   MC-APS Nbr = 10.100.100.1 (Up), advIntvl = 10, hold = 30
   workPort: status = OK, Tx-Lais = None, sdCnt = 1, sfCnt = 1
     numSwitched = 1, switchSecs = 0, lastSwitched = 07/25/2007 08:00:12
     disCntTime = , alarms = , switchCmd = No Cmd 
   protPort: status = OK, Tx-Lais = None, sdCnt = 1,  sfCnt = 0
     numSwitched = 1, switchSecs = 0, lastSwitched = 07/25/2007 08:03:39
     disCntTime = , alarms = ,  switchCmd = No Cmd  
   GrpStatus: OK, mmCnt = 1, cmCnt = 1, psbfCnt = 1, feplfCnt = 2
   LocalSwitchCmd: priority = No-Req, portNum = 0
   RemoteSwitchCmd: priority = No-Req, portNum = 0
   Running Timers = mcAdvIntvl mcHold 
   processFlag =  apsFailures = , sonet = Y
   DebugInfo: dmEv = 0, dmClrEv = 0, amEv = 1, amClrEv = 1
     cmEv = 1, cmClrEv = 1, psbfEv = 1, psbfClrEv = 1
     feplfEv = 2, feplfClrEv = 2, wtrEv = 0, psbfDetectEv = 0
     wSdEv = 1, wSfEv = 2, pSdEv = 1, pSfEv = 1
     portStatusEv = 8, rxK1Ev = 9, txLaisEv = 2, lastEvName = FeplClr
     CtlUpEv = 3, CtlDnEv = 2, wAct = 0, wDeAct = 0
Seq      Event  TxK1/K2 RxK1/K2  Dir    Active         Time    
===     ======= ======= ======= =====   ======  ================
000     ProtAdd 0xc005  0x0000  Tx-->     Work  497 02:18:10.590
001     RxKByte 0xc005  0x6dea  Rx<--     Work  497 02:20:14.820
002     RxKByte 0xc005  0xc005  Rx<--     Work  497 02:21:30.970
003     RxKByte 0xc005  0x2005  Rx<--     Work  497 02:21:36.530
004      pSFClr 0x0005  0x2005  Tx-->     Work  497 02:21:40.590
005     RxKByte 0x0005  0x0005  Rx<--     Work  497 02:21:40.600
006     RxKByte 0x0005  0xc115  Rx<--     Work  497 02:25:22.840
007     RxKByte 0x2115  0xc115  Tx-->     Prot  497 02:25:22.840
008     RxKByte 0x2115  0xa115  Rx<--     Prot  000 00:00:47.070
009     RxKByte 0x2115  0x1115  Rx<--     Prot  000 00:00:47.560
010     RxKByte 0x2115  0xc005  Rx<--     Prot  000 00:00:57.010
011     RxKByte 0x2005  0xc005  Tx-->     Work  000 00:00:57.010
012     RxKByte 0x2005  0x0005  Rx<--     Work  000 00:01:06.170
013     RxKByte 0x0005  0x0005  Tx-->     Work  000 00:01:06.170
Sample Output
:AS_SR7_1# tools dump aps mc-aps-ppp 
 
 pppmMcsModStarted = Yes
 pppmMcsDbgDoSync = Yes
 pppmMcsApsGrpHaAuditDone = Yes
 pppmMcsPostHaSyncedApsGrpId = 47
 pppmMcsMcApsChanCnt = 1280
 
 pppmMcsDbgRxPktCnt = 2560
 pppmMcsDbgRxPktNotProcessedCnt = 0
 pppmMcsDbgRxPktInvalidCnt = 0
 pppmMcsDbgInconsistentRxPktDropCnt = 0
 pppmMcsDbgInconsistentTxPktDropCnt = 1176
 pppmMcsDbgTxPktNotSentCnt = 0
 pppmMcsDbgTxPktSentCnt = 25
 pppmMcsDbgEvtDropCnt = 0
 pppmMcsDbgMemAllocErrCnt = 0
 pppmMcsDbgReTxCnt = 0
 pppmMcsDbgReTxExpCnt = 0
 pppmMcsDbgReReqCnt = 0
 
 pppmMcsStateAckQueueCnt (curr/peek) = 0/130
 pppmMcsStateReqQueueCnt (curr/peek) = 0/1280
 pppmMcsStateReReqQueueCnt (curr/peek) = 0/256
 pppmMcsStateTxQueueCnt (curr/peek) = 0/512
 pppmMcsStateReTxQueueCnt (curr/peek) = 0/130
 
 MC-APS Peer Info : 
 -------------------- 
 
   Grp 13 Addr 10.100.100.2 - Up  
   Grp 20 Addr 10.100.100.2 - Up  
   Grp 35 Addr 10.100.100.2 - Up  
   Grp 43 Addr 10.100.100.2 - Up  
   Grp 47 Addr 10.100.100.2 - Up  
 
 Number of pppmMcs Evt Msgs dispatched:
   ctl_link_state : 0
   ctl_link_up_tmr : 0
   ctl_link_down_tmr : 0
   ha_audit_done : 0
Sample Output
*A:eth_aps_sr7# tools dump aps mc-aps-signaling           
 
 MC-APS Control Debug Counters : 
 ------------------------------- 
 Ctl Pkt Rx = 0
 Invalid Rx Ctl Pkt = 0
 Incompatible Rx Ctl Pkt = 0
 Nbr not Rx Ctl Pkt = 0
 Invalid Rx Ctl Pkt Tlv = 0
 Ctl Pkt Rx-ed before HaReady = 0
 Not sent Tx Ctl Pkt = 0
 
 MC-APS-LAG Debug Counters : 
 --------------------------- 
 Ctl Pkt Rx from IOM        = 0
 
 Not processed Rx Ctl Pkt   = 0
 Invalid Rx Ctl Pkt         = 0
 Incompatible Rx Ctl Pkt    = 0
 Rx Ctl Pkt queueing failed = 0
 
 Ctl Pkt Tx (direct)        = 0
 Ctl Pkt Tx (UDP socket)    = 0
 Not sent Tx Ctl Pkt        = 0
 
 Route Update               = 0
 Matched Route Update       = 0
 
 Msg Buf Alloc Failed       = 0
 
 MC-APS-LAG NbrRoute Entries : 
 ------------------------------- 
 NbrAddr 10.1.1.1 NextHopAddr ::
   EgressIfIndex =  0  
   EgressPortId =  Unknown  
   app refCnt  =  1
   refCntTotal =  1

aps

Syntax 
aps
Context 
tools>perform
Description 

This command enables the context to perform Automated Protection Switching (APS) operations.

clear

Syntax 
clear aps-id {protect | working} [number number]
Context 
tools>perform>aps
Description 

This command removes all Automated Protection Switching (APS) operational commands.

Parameters 
aps-id—
This option clears a specific APS on un-bundled SONET/SDH ports.
Values—

aps-id

aps-group-id

aps

keyword

group-id

1 to 128

 

protect—
This command clears a physical port that is acting as the protection circuit for the APS group.
working—
This command clears a physical port that is acting as the working circuit for this APS group.
number—
Specifies the APS channel number.
Values—
1, 2

 

clear-lockout-annexb

Syntax 
clear-lockout-annexb aps-id
Context 
tools>perform>aps
Description 

This command clears lockout of the Annex B APS group.

Parameters 
aps-id—
Specifies an APS ID.
Values—

aps-id

aps-group-id

aps

keyword

group-id

1 to 128

 

exercise

Syntax 
exercise aps-id {protect | working}
Context 
tools>perform>aps
Description 

This command performs an exercise request on the protection or working circuit.

Parameters 
aps-id—
Specifies the APS ID.
Values—

aps-id

aps-group-id

aps

keyword

group-id

1 to 128

 

protect—
This command clears a physical port that is acting as the protection circuit for the APS group.
working—
This command clears a physical port that is acting as the working circuit for this APS group.

force

Syntax 
force aps-id {protect | working} [number number]
Context 
tools>perform>aps
Description 

This command forces a switch to either the protect or working circuit

Parameters 
aps-id—
Specifies the APS ID.
Values—

aps-id

aps-group-id

aps

keyword

group-id

1 to 128

 

protect—
This command clears a physical port that is acting as the protection circuit for the APS group.
working—
This command clears a physical port that is acting as the working circuit for this APS group.
number—
Specifies the APS channel number.
Values—
1, 2

 

lockout

Syntax 
lockout aps-id
Context 
tools>perform>aps
Description 

This command locks out the protection circuit.

Parameters 
aps-id—
Specifies the APS ID.
Values—

aps-id

aps-group-id

aps

keyword

group-id

1 to 128

 

lockout-annexb

Syntax 
lockout-annexb aps-id
Context 
tools>perform>aps
Description 

This command locks out the Annex B APS group.

Parameters 
aps-id—
Specifies the APS ID.
Values—

aps-id

aps-group-id

aps

keyword

group-id

1 to 128

 

request

Syntax 
request aps-id {protect | working}
Context 
tools>perform>aps
Description 

This command requests a manual switch to protection or working circuit.

Parameters 
aps-id—
Specifies the APS ID.
Values—

aps-id

aps-group-id

aps

keyword

group-id

1 to 128

 

protect—
This command requests a manual switch to a port that is acting as the protection circuit for the APS group.
working—
This command requests a manual switch to a port that is acting as the working circuit for this APS group.

eth-ring

Syntax 
eth-ring
Context 
tools>perform
Description 

This command performs Ethernet ring operations.

clear

Syntax 
clear ring-index
Context 
tools>perform>eth-ring
Description 

This command, at the Ethernet Ring Node, is used for the following operations:

  1. Clearing an active local administrative command (for example, Forced Switch or Manual Switch).
  2. Triggering reversion before the WTR or WTB timer expires in case of revertive operation.
  3. Triggering reversion in case of non-revertive operation.
Parameters 
ring-index—
This option clears a specific Ethernet ring.
Values—
1 to 128

 

force

Syntax 
force ring-index path {a | b}
Context 
tools>perform>eth-ring
Description 

This command forces a block on the ring port where the command is issued.

Parameters 
ring-index—
Specifies the ring index.
Values—
1 to 128

 

path—
Displays information for a specific path.
Values—
a, b

 

manual

Syntax 
manual ring-index path {a | b}
Context 
tools>perform>eth-ring
Description 

In the absence of a failure or FS, this command forces a block on the ring port where the command is issued.

Parameters 
ring-index—
Specifies the ring index.
Values—
1 to 128

 

path—
Displays information for a specific path.
Values—
a, b

 

eth-tunnel

Syntax 
eth-tunnel tunnel-index [clear]
Context 
tools>dump
Description 

This command displays Ethernet tunnel information.

Parameters 
tunnel-id—
Specifies the tunnel ID.
Values—
1 to 128

 

clear—
Clears statistics after reading.
Output 

The following output is an example of Ethernet tunnel information.

Sample Output
*A:PE-E# tools dump eth-tunnel 1
 
TunnelId 1 (Up/Up), Port eth-tunnel-1 (Up/Up): type g8031-1to1
 NumMems 2/2, Up/Dn 0/0, active 0x1, present 0x3 baseMemPort 1/1/2
  memId 1 (P), port 1/1/2 (Up), tag 1.0(Up) status (Up/Up)
    ccCnt-sf/ok 1/1 idx 0 tunId 1
  memId 2 (S), port 2/1/2 (Up), tag 1.0(Up) status (Up/Up)
    ccCnt-sf/ok 0/0 idx 1 tunId 1
 
  TunId = 1, state = Running, Active =  Work, Now = 000 00:16:48.140
   revert = 1, ReqState = NR-NULL, Pdu(Tx/Rx): 0x0f0000/0x0f0000
   Defects =
   Running Timers = PduReTx
    Work MemId = 1 (1/1/2:1.0), state = Ok, cc = 000 00:16:23.510U
      ActiveCnt = 4, ActiveSeconds = 791
    Protect MemId = 2 (2/1/2:1.0), state = Ok, cc = 000 00:09:47.560U
      ActiveCnt = 3, ActiveSeconds = 308
   DbgCnts: swoEv = 2, wMemSts = 2, pMemSts =  0
      rxPdu (valid/Invalid) = 4/0, wSfClr = 1, pSfClr = 0, wtrExp =  1
      cm = 0, cmClr = 0, pm = 0, pmClr = 0, nr = 0, nrClr = 0
  Seq  Event     TxPdu           RxPdu       Dir    Act          Time
  ===  ========  ============  ============  =====  ====  ================
  000   wMemSts  0xbf0101 wSF  0x0f0000  NR  Tx-->  Prot  000 00:16:12.450
  001     RxPdu  0xbf0101 wSF  0x0f0101  NR  Rx<--  Prot  000 00:16:12.450
  002     RxPdu  0xbf0101 wSF  0xbf0101 wSF  Rx<--  Prot  000 00:16:12.480
  003     RxPdu  0xbf0101 wSF  0x0f0101  NR  Rx<--  Prot  000 00:16:24.890
  004    wSFClr  0x5f0101 WTR  0x0f0101  NR  Tx-->  Prot  000 00:16:25.030
  005       WTR  0x0f0000  NR  0x0f0101  NR  Tx-->  Work  000 00:16:26.630
  006     RxPdu  0x0f0000  NR  0x0f0000  NR  Rx<--  Work  000 00:16:26.630
*A:PE-E#

frame-relay

Syntax 
frame-relay port-id
Context 
tools>dump
Description 

This command displays frame-relay information.

Parameters 
port-id—
Specifies the physical port ID.

port-id

slot/mda/port [.channel]

bundle-id

bundle-type-slot/mda.bundle-num

bundle

keyword

type

fr

bundle-num

1 to 336

eth-sat-id

esat-id/slot/port

esat

keyword

id

1 to 20

pxc-id

pxc-id.sub-port

pxc

keyword

id

1 to 64

sub-port

a, b

Output 

The following output is an example of frame relay information.

Sample Output
tools dump frame-relay bundle-fr-1/1.1
 
MLFR info for bundle-fr-1/1.1:
    expectedBundleIdStr : "7750-bundle-fr-1/1.1"
    bundleId            : 1
    active/configured   : 4/4
    adminEnabled        : 1
    ddDebDownCnt        : 10
    ddMaxForBundle      : 0
    fwdId               : 0
    linkDebugMask       : 0
 
 
-------- Member Information ---------
 
1/1/1.1.1.1                 PortId = 0x22208056 
    Internal ID              : bundle 1, link 1
    Link protocol state      : Up
    Diff delay state         : Yellow
    ddRedCnt                 : 0
    ddYellowCnt              : 11
    Smoothed diff delay      : 20 ms.
    Historical RTT           : 22788, 22756, 22752 us.
    Rx LinkId                : "1/1/1.1.1.1"
    WARNING                  : dbgDelay=20 ms
    LIP CTL Messages         : Tx: 136         Rx: 135       
    Hello Messages           : Tx: 121         Rx: 12        
    Hello Ack Messages       : Tx: 12          Rx: 121       
    AddLink Messages         : Tx: 2           Rx: 1         
    AddLinkAck Messages      : Tx: 1           Rx: 1         
    AddLinkRej Messages      : Tx: 0           Rx: 0         
1/1/1.1.2.1                 PortId = 0x22208077 
    Internal ID              : bundle 1, link 2
    Link protocol state      : Up
    Diff delay state         : OK
    Smoothed diff delay      : 0 ms.
    Historical RTT           : 2271, 2304, 2309 us.
    Rx LinkId                : "1/1/1.1.2.1"
    LIP CTL Messages         : Tx: 136         Rx: 135       
    Hello Messages           : Tx: 121         Rx: 12        
    Hello Ack Messages       : Tx: 12          Rx: 121       
    AddLink Messages         : Tx: 2           Rx: 1         
    AddLinkAck Messages      : Tx: 1           Rx: 1         
    AddLinkRej Messages      : Tx: 0           Rx: 0         
1/1/1.1.3.1                 PortId = 0x22208098 
    Internal ID              : bundle 1, link 4
    Link protocol state      : Up
    Diff delay state         : OK
    Smoothed diff delay      : 0 ms.
    Historical RTT           : 2218, 2223, 2359 us.
    Rx LinkId                : "1/1/1.1.3.1"
    LIP CTL Messages         : Tx: 14          Rx: 13        
    Hello Messages           : Tx: 8           Rx: 1         
    Hello Ack Messages       : Tx: 1           Rx: 8         
    AddLink Messages         : Tx: 3           Rx: 1         
    AddLinkAck Messages      : Tx: 1           Rx: 2         
    AddLinkRej Messages      : Tx: 0           Rx: 0         
1/1/1.1.4.1                 PortId = 0x222080b9 
    Internal ID              : bundle 1, link 3
    Link protocol state      : Up
    Diff delay state         : OK
    Smoothed diff delay      : 0 ms.
    Historical RTT           : 2248, 2242, 2309 us.
    Rx LinkId                : "1/1/1.1.4.1"
    LIP CTL Messages         : Tx: 14          Rx: 13        
    Hello Messages           : Tx: 8           Rx: 1         
    Hello Ack Messages       : Tx: 1           Rx: 8         
    AddLink Messages         : Tx: 3           Rx: 1         
    AddLinkAck Messages      : Tx: 1           Rx: 2         
    AddLinkRej Messages      : Tx: 0           Rx: 0     

lag

Syntax 
lag lag-id lag-id
Context 
tools>dump
Description 

This command dumps LAG information.

Parameters 
lag-id—
Specifies the LAG ID.
Values—
1 to 800

 

map-to-phy-port

Syntax 
map-to-phy-port {ccag ccag-id | lag lag-id | eth-tunnel tunnel-index} {isid isid [end-isid isid] | service service-id | svc-name [end-service service-id | svc-name]} [summary]
Context 
tools>dump
Description 

This command provides the ability to respond to a query to provide the link in a LAG/Ethernet tunnel (load sharing protection mode)/CCAG that is currently assigned to a given service-id or ISID.

Parameters 
lag-id—
Specifies the LAG ID.
Values—
1 to 800

 

isid—
Specifies the ISID.
Values—
0 to 16777215

 

service-id—
Specifies the service ID.
Values—
1 to 2148278381, svc-name: 64 char max

 

tunnel-index—
Specifies the tunnel index.
Values—
1 to 1024

 

ccag-id—
Specifies the CCAG ID.
Values—
1 to 8

 

summary—
Displays summary information.

port

Syntax 
port port-id
Context 
tools>dump
Description 

This command enables the context to dump port information.

Parameters 
port-id—
Specifies the physical port ID.

port-id

slot/mda/port

bundle-id

bundle-type-slot/mda.bundle-num

bundle

keyword

type

ima, fr, ppp

bundle-num

1 to 336

bpgrp-id

bpgrp-type-bpgrp-num

bpgrp

keyword

type

ima, ppp

bpgrp-num

1 to 2000

aps-id

aps-group-id

aps

keyword

group-id

1 to 128

dwdm

Syntax 
dwdm
Context 
tools>dump>port
Description 

This command enables the context to dump Dense Wavelength Division Multiplexing (DWDM) information for the port.

coherent

Syntax 
coherent
Context 
tools>dump>port>dwdm
Description 

This command enables the context to dump coherent optics information for the port.

cpr-wndw-sz-srch-info

Syntax 
cpr-wndw-sz-srch-info
Context 
tools>dump>port>dwdm>coherent
Description 

This command dumps the Carrier Phase Recovery window size search information for the port.

pcs

Syntax 
pcs[clear]
Context 
tools>dump>port
Description 

This command dumps the Physical Coding Sublayer (PCS) information for the port.

rs-fec

Syntax 
rs-fec [clear]
Context 
tools>dump>port
Description 

This command dumps the Reed-Solomon Forward Error Correction (RS-FEC) information for port.

ppp

Syntax 
ppp port-id
Context 
tools>dump
Description 

This command displays PPP information for a port.

Parameters 
port-id—
Specifies the physical port ID.

port-id

slot/mda/port [.channel]

bundle-id

bundle-type-slot/mda.bundle-num

bundle

keyword

type

ppp

bundle-num

1 to 336

bpgrp

bpgrp-type-bpgrp-num

bpgrp

keyword

type

ppp

bpgrp-num

1 to 2000

aps-id

aps-group-id[channel.]

aps

keyword

group-id

1 to 128

eth-sat-id

esat-id/slot/port

esat

keyword

id

1 to 20

pxc-id

pxc-id.sub-port

pxc

keyword

id

1 to 64

sub-port

a, b

Output 

The following output is an example of PPP information.

Sample Output
*A:sr7# tools dump ppp aps-1.1.1.1 
==============================================================================
Id             : aps-1.1.1.1        ppp unit       : 40
member of      : bpgrp-ppp-1
==============================================================================
looped back    : no                 dbgMask        : 0x0
------------------------------------------------------------------------------
LCP 
------------------------------------------------------------------------------
phase          : NETWORK            state          : OPENED
passive        : off                silent         : off
restart        : on
 
mru            : 1500               mtu            : 1502
ack'd peer mru : 1500
got local mrru : 1524
local magic    : 0x0                peer magic     : 0x0
 
keepalive      : on                 echo num       : 2
echo timer     : on                 echos fail     : 3
echo intv      : 10                 echos pend     : 0
 
options      mru      asyncMap upap     chap     magic    pfc     
we negotiate Yes       No       No       No       No      Yes     
peer ack'd   Yes       No       No       No       No       No     
we allow     Yes       No       No       No       No      Yes     
we ack'd     Yes       No       No       No       No       No     
 
options      acfc     lqr      mrru     shortSeq endPoint mlhdrfmt  
we negotiate Yes       No      Yes       No      Yes       No     
peer ack'd    No       No      Yes       No      Yes       No     
we allow     Yes       No      Yes      Yes      Yes       No     
we ack'd      No       No      Yes       No      Yes       No     
==============================================================================
*A:sr7# 

redundancy

Syntax 
redundancy
Context 
tools>dump
Description 

This command enables the context to dump redundancy parameters.

multi-chassis

Syntax 
multi-chassis
Context 
tools>dump>redundancy
Description 

This command enables the context to dump multi-chassis parameters.

mc-ring

Syntax 
mc-ring
mc-ring peer ip-address [ring sync-tag]
Context 
tools>dump>redundancy>multi-chassis
Description 

This command dumps multi-chassis ring data.

Parameters 
ip-address—
Specifies the peer’s IP address.
sync-tag—
Specifies the ring’s sync-tag created in the config>redundancy>mc>peer>mcr>ring context.

srrp-sync-database

Syntax 
srrp-sync-database [instance instance-id] [peer ip-address]
Context 
tools>dump>redundancy>multi-chassis
Description 

This command dumps multi-chassis SRRP sync database information.

Parameters 
instance-id—
Specifies the instance ID.
Values—
1 to 4294967295

 

ip-address—
Dumps the specified address (in the form of a.b.c.d).
Values—
ipv4-address: a.b.c.d
ipv6-address:
  1. x:x:x:x:x:x:x:x (eight 16-bit pieces)
  2. x:x:x:x:x:x:d.d.d.d, where x: [0 to FFFF]H and d: [0 to 255]D

 

sync-database

Syntax 
sync-database [peer ip-address] [port port-id | lag-id] [sync-tag sync-tag] [application application] [detail] [type type]
sync-database [peer ip-address] [sdp sdp-id] [sync-tag sync-tag] [application application] [detail] [type type]
Context 
tools>dump>redundancy>multi-chassis
Description 

This command dumps multi-chassis sync database information.

Parameters 
ip-address
Dumps the specified address of the multi-chassis peer.
Values—
ipv4-address: a.b.c.d
ipv6-address:
  1. x:x:x:x:x:x:x:x (eight 16-bit pieces)
  2. x:x:x:x:x:x:d.d.d.d
  3. x: [0 to FFFF]H
  4. d: [0 to 255]D

 

port-id
Dumps the specified port ID of the multi-chassis peer.
Values—

port-id, lag-id

slot/mda/port

lag-id

lag-id

lag

keyword

id

1 to 800

pw-id

pw-id

pw

keyword

id

1 to 32767

 

lag-id
Dumps the specified Link Aggregation Group (LAG) on this system.
Values—

port-id, lag-id

slot/mda/port

lag-id

lag-id

lag

keyword

id

1 to 800

pw-id

pw-id

pw

keyword

id

1 to 32767

 

sync-tag
Dumps the synchronization tag used while synchronizing this port with the multi-chassis peer up to 32 characters in length.
application—
Dumps the specified application information that was synchronized with the multi-chassis peer.
Values—

dhcp-server

local DHCP server

igmp

internet group management protocol

igmp-snooping

IGMP snooping

mc-ring

multi-chassis ring

l2tp

L2TP

mld

multicast listener discovery

mld-snooping

multicast listener discovery snooping

srrp

simple router redundancy protocol

sub-host-trk

subscriber host tracking

sub-mgmt-ipoe

subscriber management for IPoE

sub-mgmt-pppoe

subscriber management for PPPoE

mc-ipsec

multi-chassis IPsec

python

Python cache

diameter-proxy

diameter proxy

pim-snpg-sap

protocol independent multicast snooping for SAP

pim-snpg-sdp

protocol independent multicast snooping for SDP

 

detail—
Displays detailed information.
type—
Displays information for the specified type.
Values—
alarm-deleted, local-deleted, global-deleted, omcr-standby, omcr-alarmed

 

sdp-id—
Displays information for the specified SDP ID.
Values—
1 to 32767

 

Output 

The following output is an example of sync database information.

Sample Output
A:Dut-C# tools dump redundancy multi-chassis sync-database application
 
 <ip-address>         : a.b.c.d
 <port-id|lag-id>     : slot/mda/port or lag-<lag-id>
 <sync-tag>           : [32 chars max]
 <application>        : dhcp-server    - local dhcp server
                        igmp           - internet group management protocol
                        igmp-snooping  - igmp-snooping
                        mc-ring        - multi-chassis ring
                        mld            - multicast listener discovery
                        mld-snooping   - multicast listener discovery-snooping
                        srrp           - simple router redundancy protocol
                        sub-host-trk   - subscriber host tracking
                        sub-mgmt-ipoe  - subscriber management for IPoE
                        sub-mgmt-pppoe - subscriber management for PPPoE
                        mc-ipsec       - multi-chassis IPsec
 <detail>             :  - displays detailed information
 <type>               : alarm-deleted|local-deleted|global-deleted|
                        omcr-standby|omcr-alarmed

ima

Syntax 
ima
Context 
tools>perform
Description 

This command allows the use of IMA operations.

reset

Syntax 
reset bundle-id
Context 
tools>perform>ima
Description 

This command sets an IMA-bundle to the Start Up state.

Parameters 
bundle-id—
Specifies an existing bundle ID.
Values—
bundle-ima-slot/mda.bundle-num
bundle-num: 1 to 256

 

lag

Syntax 
lag
Context 
tools>perform
Description 

This command provides tools for controlling LAG.

clear-force

Syntax 
clear-force all-mc
clear-force lag-id lag-id [sub-group sub-group-id]
clear-force peer-mc ip-address
Context 
tools>perform>lag
Description 

This command clears forced status.

Parameters 
all-mc—
Specifies all MC-LAGs.
lag-id
Specifies the LAG ID.
Values—
1 to 800

 

sub-group-id
Specifies the subscriber group ID.
Values—
1 to 16

 

ip-address
Specifies the peer MC IP address.
Values—
ipv4-address: a.b.c.d
ipv6-address:
  1. x:x:x:x:x:x:x:x (eight 16-bit pieces)
  2. x:x:x:x:x:x:d.d.d.d, where x: [0 to FFFF]H and d: [0 to 255]D

 

force

Syntax 
force all-mc {active | standby}
force lag-id lag-id [sub-group sub-group-id] {active | standby}
force peer-mc ip-address {active | standby}
Context 
tools>perform>lag
Description 

This command allows forcing the specified LAG, subgroup, all MC-LAGs, or remote peer for MC-LAGs to become active or standby when LAG runs in Active/Standby mode. To remove the forced condition, execute the tools perform lag clear-force command.

Parameters 
all-mc—
Specifies all MC-LAGs.
active—
Specifies to become active.
standby—
Specifies to become standby.
lag-id—
Specifies the LAG ID.
Values—
1 to 800

 

sub-group-id—
Specifies the subscriber group ID.
Values—
1 to 16

 

ip-address—
Specifies the IP address.
Values—
ipv4-address: a.b.c.d
ipv6-address:
  1. x:x:x:x:x:x:x:x (eight 16-bit pieces)
  2. x:x:x:x:x:x:d.d.d.d, where x: [0 to FFFF]H and d: [0 to 255]D

 

load-balance

Syntax 
load-balance lag-id lag-id [class {1 | 2 | 3}]
Context 
tools>perform>lag
Description 

Load balance specified LAG's links when per-link-hash weighted is deployed. Load balancing can be per specified class or on all classes if no class is specified.

Parameters 
lag-id—
Specifies the LAG ID.
Values—
1 to 800

 

class—
Specifies the class.
Values—
1, 2, 3

 

2.21.2.11.1. Debug Commands

lmi

Syntax 
lmi [port-id]
no lmi
Context 
debug>frame-relay
Description 

This debug command enables tracing of all the LMI messages in both receive and transmit directions for one or all of the Frame Relay interfaces. All types of Frame Relay interfaces are supported. If the port ID is not specified, debug is enabled on all Frame Relay interfaces.

The no form of the command turns off LMI and Frame-Relay debugging, debug>frame-relay>no lmi and debug>no frame-relay.

Parameters 
port-id—
Specifies the ILMI-supporting port ID.
Values—

port-id

slot/mda/port [.channel]

eth-sat-id

esat-id/slot/port

esat

keyword

id

1 to 20

pxc-id

pxc-id.sub-port

pxc

keyword

id

1 to 64

sub-port

a, b

 

Output 

The following output is an example of frame relay LMI information.

Sample Output
2959 2007/04/11 23:01:34.63 MINOR: DEBUG #2001 - FR
"FR: TX STATUS Msg on dce Port: 1/1/1 LMI: itu
FR Hdr: 00 01 03 08 00 7D
Rpt IE: 51 01 01 LINK_INT_VERIFY
KA IE: 53 02 31 45 TxSeqNo=49 RxSeqNo=69"
 
2960 2007/04/11 23:01:44.63 MINOR: DEBUG #2001 - FR
"FR: RX STATUS ENQ Msg on dce Port: 1/1/1 LMI: itu
FR Hdr: 00 01 03 08 00 75
Rpt IE: 51 01 01 LINK_INT_VERIFY
KA IE: 53 02 46 31 TxSeqNo=70 RxSeqNo=49"

atm

Syntax 
[no] atm
Context 
debug
Description 

This command enables, disables and configures debugging for the ATM.

ilmi

Syntax 
ilmi [port-id]
no ilmi port-id
Context 
debug>atm
Description 

This command enables debugging for ATM ILMI.The no form of the command turns off ILMI and debugging.

Parameters 
port-id—
Specifies the port ID.
Values—
slot/mda/port [.channel] or
bundle-ima-slot/mda. bundle-num
bundle: keyword
ima: keyword
bundle-num: 1 to 56

 

Output 

The following output is an example of ATM ILMI information

Sample Output
A:CHRISILMI# debug atm no ilmi 1/2/2
A:CHRISILMI# debug atm ilmi 1/2/4
 
In kernel:
ILMI_DEBUG_LOG {557907970}: 21:32:28 
PDU DUMP (RAW):
 30 77 02 01 00 04 04 49 4c 4d 49 a4
 6c 06 07 2b 06 01 04 01 82 61 40 04
 00 00 00 00 02 01 06 02 01 02 43 03
 1b 24 b1 30 50 30 12 06 0d 2b 06 01
 04 01 82 61 02 05 01 01 01 00 02 01
 00 30 12 06 0d 2b 06 01 04 01 82 61
 02 05 01 01 03 00 02 01 21 30 12 06
 0d 2b 06 01 04 01 82 61 02 05 01 01
 02 00 02 01 00 30 12 06 0d 2b 06 01
 04 01 82 61 02 05 01 01 04 00 02 01
 
 00 00 00
PDU DUMP (DECODED):
  PDU Length: 123
   Community: ILMI
     Version: 1
    Msg Type: SNMP TRAP
    ObjectId: 1.3.6.1.4.1.353.2.5.1.1.1.0
    ObjectId: 1.3.6.1.4.1.353.2.5.1.1.3.0
    ObjectId: 1.3.6.1.4.1.353.2.5.1.1.2.0
    ObjectId: 1.3.6.1.4.1.353.2.5.1.1.4.0
...

cisco-hdlc

Syntax 
cisco-hdlc [port-id]
no cisco-hdlc
Context 
debug
Description 

This command configures debugging for Cisco-HDLC encapsulation.

Parameters 
port-id—
Specifies the physical port ID.
Values—
slot/mda/port[.channel]

 

frame-relay

Syntax 
[no] frame-relay
Context 
debug
Description 

This command enables, disables and configures debugging for frame relay.

frf16

Syntax 
[no] frf16 port-id
Context 
debug>frame-relay
Description 

This command enables tracing of all FRF16 compliant MLFR link integrity protocol messages in both the receive and transmit directions on a specific member link of an MLFR bundle. The no form of the command turns off MLFR debugging.

Parameters 
port-id—
Specifies the port ID of the FRF16 bundle member link.

port-id

slot/mda/port [.channel]

bundle-id

bundle-type-slot/mda.bundle-num

bundle

keyword

type

fr

bundle-num

1 to 336

Output 

The following output is an example of frame relay FRF16 information.

Sample Output
1 2009/02/18 10:39:42.74 UTC MINOR: DEBUG #2001 Base MLFR
"MLFR: [_LIP_ParseRxFrame]
RxMsg <bundle-fr-1/1.1:1/1/1.0x56> <state-0: Up>
<MsgType-5:HelloAck> 
     <ie-03:      MagicNum>,<len 06>, <27002>
     <ie-05:     TimeStamp>,<len 06>, <0x4b1c4558>"
 
2 2009/02/18 10:39:43.73 UTC MINOR: DEBUG #2001 Base MLFR
"MLFR: [_LIP_TxFrame]
TxMsg <bundle-fr-1/1.1:1/1/1.0x56> <state-0: Up>
<MsgType-4:Hello> 
     <ie-03:      MagicNum>,<len 06>, <31104>
     <ie-05:     TimeStamp>,<len 06>, <0x5d804569>"
 
3 2009/02/18 10:39:43.73 UTC MINOR: DEBUG #2001 Base MLFR
"MLFR: [_LIP_ParseRxFrame]
RxMsg <bundle-fr-1/1.1:1/1/1.0x56> <state-0: Up>
<MsgType-5:HelloAck> 
     <ie-03:      MagicNum>,<len 06>, <27002>
     <ie-05:     TimeStamp>,<len 06>, <0x5d804569>"

lmi

Syntax 
lmi [port-id]
no lmi
Context 
debug>frame-relay
Description 

This debug command enables tracing of all the LMI messages in both receive and transmit directions for one or all of the Frame Relay interfaces. All types of Frame Relay interfaces are supported. If the port ID is not specified, debug is enabled on all Frame Relay interfaces.

The no form of the command turns off LMI and Frame-Relay debugging, debug>frame-relay>no lmi and debug>no frame-relay.

Parameters 
port-id—
Specifies the LMI-supporting port ID.
Values—
slot/mda/port[.channel]

 

Output 

The following output is an example of LMI information.

Sample Output
2959 2007/04/11 23:01:34.63 MINOR: DEBUG #2001 - FR
"FR: TX STATUS Msg on dce Port: 1/1/1 LMI: itu
FR Hdr: 00 01 03 08 00 7D
Rpt IE: 51 01 01 LINK_INT_VERIFY
KA IE: 53 02 31 45 TxSeqNo=49 RxSeqNo=69"
 
2960 2007/04/11 23:01:44.63 MINOR: DEBUG #2001 - FR
"FR: RX STATUS ENQ Msg on dce Port: 1/1/1 LMI: itu
FR Hdr: 00 01 03 08 00 75
Rpt IE: 51 01 01 LINK_INT_VERIFY
KA IE: 53 02 46 31 TxSeqNo=70 RxSeqNo=49"

lag

Syntax 
lag [lag-id lag-id [port port-id]] [all]
lag [lag-id lag-id [port port-id]] [sm] [pkt] [cfg] [red] [iom-upd] [port-state] [timers] [sel-logic] [mc] [mc-pkt]
no lag [lag-id lag-id]
Context 
debug
Description 

This command enables debugging for LAG.

Parameters 
lag-id—
Specifies the link aggregation group ID.
Values—
1 to 800

 

port-id—
Specifies the physical port ID.
Values—
slot/mda/port

 

all—
Specifies to display all LAG information.
sm—
Specifies to display trace LACP state machine.
pkt—
Specifies to display trace LACP packets.
cfg—
Specifies to display trace LAG configuration.
red—
Specifies to display trace LAG high availability.
iom-upd—
Specifies to display trace LAG IOM updates.
port-state—
Specifies to display trace LAG port state transitions.
timers—
Specifies to display trace LAG timers.
sel-logic—
Specifies to display trace LACP selection logic.
mc—
Specifies to display multi-chassis parameters.
mc-packet—
Specifies to display the MC-LAG control packets with valid authentication were received on this system.

ppp

Syntax 
ppp port-id
no ppp [port-id]
Context 
debug
Description 

This command enables/disables and configures debugging for PPP.

Parameters 
port-id—
Specifies the physical port ID.
Values—

port-id

slot/mda/port [.channel]

bundle ID

bundle-type-slot/mda.bundle-num

bundle

keyword

type

ppp

bundle-num

1 to 336

bpgrp-id

bpgrp-type-bpgrp-num

bpgrp

keyword

type

ppp

bpgrp-num

1 to 2000

aps-id

aps-group-id[.channel]

aps

keyword

group-id

1 to 128