2.16. MPLS/RSVP Show, Tools, Router, Clear, and Debug Command Reference

2.16.1. Command Hierarchies

2.16.1.1. Show Commands

show
— router
— mpls
bypass-tunnel [to ip-address] [protected-lsp name] [dynamic | manual | p2mp] [detail] [lsp-name session-name]
class-forwarding-policy [policy-name]
interface [ip-int-name | ip-address] [label-map label]
interface [ip-int-name | ip-address] statistics [aux-stats]
ingress-stats-template [type {p2p | p2mp}] [SessionNameString] [sender ip-address] [detail]
lsp [lsp-name] [status {up | down}] [from ip-address | to ip-address] [detail] [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp {transit | terminate} [status {up | down}] [from ip-address | to ip-address | lsp-name name] [detail]
lsp count
lsp [lsp-name] activepath [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] path [path-name] [status {up | down}] [detail] [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] path [path-name] mbb [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] auto-bandwidth [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] path [path-name] mbb
lsp-egress-stats lsp-name
lsp-egress-stats ip-address lsp lsp-name
lsp-egress-stats sender-address:lsp-name
lsp-ingress-stats ip-address lsp lsp-name
lsp-template [lsp-template-name] [detail]
— mpls-tp
lsp-egress-stats [active]
lsp-egress-stats lsp lsp-name
lsp-ingress-stats [active]
lsp-ingress-stats lsp lsp-name
status
transit-path [path-name] [detail]
p2mp-info [type {originate | transit | terminate}] [s2l-endpoint ip-address]
p2mp-lsp [lsp-name] [detail]
p2mp-lsp [lsp-name] p2mp-instance [p2mp-instance-name] [mbb]
p2mp-lsp [lsp-name] p2mp-instance [p2mp-instance-name] s2l [s2l-name [to s2l-to-address]][status {up | down}] [detail]
p2mp-lsp [lsp-name] p2mp-instance [p2mp-instance-name] s2l [s2l-name [to s2l-to-address]] mbb
path [path-name] [lsp-binding]
path path-name p2mp-lsp-binding
sr-te-lsp [lsp-name] [status {up | down}] [detail] path [path-name] [auto-lsp {all | mesh-p2p-srte | one-hop-p2p-srte}]
sr-te-lsp [lsp-name] [detail] [auto-lsp {all | mesh-p2p-srte | one-hop-p2p-srte}]
sr-te-lsp [lsp-name] [status {up | down}] [to ip-address] [detail] [auto-lsp {all | mesh-p2p-srte | one-hop-p2p-srte}]
srlg-database [router-id ip-address] [interface ip-address]
static-lsp [lsp-name]
static-lsp {transit | terminate}
static-lsp count
status
tp-lsp [lsp-name] [status {up | down}] [from ip-address | to ip-address] [detail]
tp-lsp [lsp-name] path [protecting | working] [detail]
tp-lsp [lsp-name] protection
— mpls-labels
label start-label [end-label | in-use | owner]
summary
show
— router
— bfd
session {ipv4 | ipv6} detail [lag lag-id] lag-port port-id
session [lsp-ldp head [prefix ip-prefix/ip-prefix-length [src-ip ip-address]] [detail]]
session [lsp-ldp tail [prefix ip-prefix/ip-prefix-length [dst-ip ip-address]] [detail]]
session lsp-name Lsp Name
session lsp-rsvp {head | tail}
session src ip-address/link-local address dest ip-address | link-local address detail lsp-rsvp {head | tail} tunnel-id tunnel-id lsp-id lsp-id
session mpls-tp
session lsp-name Lsp Name [link-type {cc-only | cc-cv}] detail
session p2mp-interface interface-name detail
session src ip-address/link-local address detail lsp-rsvp {head | tail} rsvp-session-name [256 chars max]
session [src ip-address/link-local address] [ipv4 | ipv6]
session src ip-address/link-local address dest ip-address | link-local address
session src ip-address/link-local address detail
session summary
session type type [ipv4 | ipv6]
— rsvp
interface [interface [ip-int-name]] statistics [detail]
neighbor [ip-address] [detail]
session [session-type] [from ip-address | to ip-address | lsp-name name] [status {up | down}] [detail] [interface ip-int-name]
status
show
— test-oam
lsp-bfd ldp prefix ip-prefix/prefix-length
lsp-bfd local-bfd-discrim bfd-discriminator
lsp-bfd lsp-name lsp-name

2.16.1.2. Tools Commands

tools
— dump
— router
— mpls
bypass-tunnel [lsp-name] plr
ftn
ilm
lspinfo [lsp-name] [detail]
te-lspinfo [endpoint ip-address] [sender ip-address] [lspid lsp-id] [detail] [p2p | p2p-tid tunnel-id]
te-lspinfo [endpoint ip-address] [sender ip-address] [lspid lsp-id] [detail] [p2mp | p2mp-tid tunnel-id]{[phops] [nhops] [s2l ip-address]}}
tp-interface interface-num [clear]
tp-tunnel lsp-name [clear]
tp-tunnel id tunnel-id [clear]
— rsvp
neighbor [ip-address] [detail]
psb
rsb
tcsb [endpoint endpoint-address] [sender sender-address] [tunnelid tunnel-id] [lspid lsp-id] [detail]
— perform
— router
— mpls
adjust-autobandwidth [lsp lsp-name [force [bandwidth mbps]]]
cspf to ip-addr [from ip-addr] [bandwidth bandwidth] [include-bitmap bitmap] [exclude-bitmap bitmap] [hop-limit limit] [exclude-address excl-addr [excl-addr...(up to 8 max)]] [use-te-metric] [strict-srlg] [srlg-group grp-id...(up to 8 max)] [exclude-node excl-node-id [excl-node-id..(up to 8 max)]] [skip-interface interface-name] [ds-class-type class-type] [cspf-reqtype req-type] [least-fill-min-thd thd] [setup-priority val] [hold-priority val]
force-switch-path [lsp lsp-name] [path path-name]
— no force-switch-path lsp lsp-name
resignal {lsp lsp-name path path-name | delay minutes}
resignal {p2mp-lsp p2mp-lsp-name p2mp-instance p2mp-instance-name | p2mp-delay p2mp-minutes}
resignal-bypass {lsp bypass-lsp-name [force] | delay minutes}
revert [lsp lsp-name]
sr-te-cspf to ip-address [path path-name] [from ip-address]
switch-path [lsp lsp-name] [path path-name]
clear id tunnel-id
clear lsp-name
force id tunnel-id
force lsp-name
lockout id tunnel-id
lockout lsp-name
manual id tunnel-id
manual lsp-name
trap-suppress number-of-traps time-interval
update-path {lsp lsp-name path current-path-name new-path new-path-name}

2.16.1.3. Router Commands

config
— router
[no] igmp
[no] tunnel-interface rsvp-p2mp lsp-name [sender ip-address]
[no] tunnel-interface rsvp-p2mp lsp-name [sender ip-address]

2.16.1.4. Clear Commands

clear
— router
— bfd
session lsp-ldp head ip-prefix/prefix-length src-ip ip-address
session lsp-ldp tail ip-prefix/prefix-length dst-ip ip-address
session src-ip ip-address dst-ip ip-address
session src-ip ip-address dst-ip ip-address lsp-rsvp {head | tail} tunnel-id [0..4294967295] lsp-id [0..4294967295]
session mpls-tp lsp-name path {working | protect}
session p2mp-interface interface-name
session src-ip ip-address lsp-rsvp {head | tail} rsvp-session-name [256 chars max]
statistics lsp-ldp head ip-prefix/prefix-length src-ip ip-address
statistics lsp-ldp tail ip-prefix/prefix-length dst-ip ip-address
statistics src-ip ip-address dst-ip ip-address
statistics all
statistics src-ip ip-address dst-ip ip-address lsp-rsvp {head | tail} tunnel-id [0..4294967295] lsp-id [0..4294967295]
statistics mpls-tp lsp-name path {working | protect}
statistics p2mp-interface interface-name
statistics src-ip ip-address lsp-rsvp {head | tail} rsvp-session-name [256 chars max]
— mpls
interface [ip-int-name] [statistics | aux-stats]
lsp lsp-name
lsp-autobandwidth [lsp-name]
lsp-egress-stats lsp-name
lsp-ingress-stats ip-address lsp lsp-name
lsp-ingress-stats sender-address:lsp-name
— rsvp

2.16.1.5. Debug Commands

debug
— router
mpls [lsp lsp-name] [sender source-address] [endpoint endpoint-address] [tunnel-id tunnel-id] [lsp-id lsp-id] [interface ip-int-name]
— no mpls
[no] event
ack [detail]
— no ack
frr [detail]
— no frr
iom [detail]
— no iom
lsp-setup [detail]
— no lsp-setup
mbb [detail]
— no mbb
misc [detail]
— no misc
[no] pcc
[no] te
xc [detail]
— no xc
rsvp [lsp lsp-name] [sender source-address] [endpoint endpoint-address] [tunnel-id tunnel-id] [lsp-id lsp-id] [interface ip-int-name]
— no rsvp
[no] event
ack [detail]
— no ack
[no] auth
misc [detail]
— no misc
nbr [detail]
— no nbr
path [detail]
— no path
resv [detail]
[no] rr
— no resv
[no] packet
ack [detail]
— no ack
all [detail]
— no all
bundle [detail]
— no bundle
hello [detail]
— no hello
path [detail]
— no path
patherr [detail]
— no patherr
pathtear [detail]
— no pathtear
resv [detail]
— no resv
resverr [detail]
— no resverr
resvtear [detail]
— no resvtear
srefresh [detail]
— no srefresh

2.16.2. Command Descriptions

2.16.2.1. Show Commands

Note:

The command outputs in this chapter are examples only; actual displays may differ depending on supported functionality and user configuration.

auto-lsp

Syntax 
auto-lsp [lsp-name] auto-bandwidth
auto-lsp [lsp-name] [status {up | down}] [detail] [to ip-address]
auto-lsp [lsp-name] [status {up | down}] {mesh-p2p | one-hop-p2p} [detail] [to ip-address]
Context 
show>router>mpls
Description 

This command displays Auto-LSP information.

Parameters 
lsp-name—
Specifies the LSP name up to 64 character in length.
up | down—
Specifies the state.
mesh-p2p | one-hop-p2p—
Specifies the auto LSP type.
Output 

The following output is an example of MPLS auto LSP information.

Sample Output
*A:Dut-C# show router mpls auto-lsp
=============================================================================
MPLS Auto-LSP Template
=============================================================================
LSP Name                           Type             Fastfail    Admin   Oper
                                                    Config      State   State
------------------------------------------------------------------------
meshP2pLsp3-10.20.1.6-61441        MeshP2P          Yes         Up      Up
meshP2pLsp2-10.20.1.1-61442        MeshP2P          Yes         Up      Up
meshP2pLsp2-10.20.1.2-61443        MeshP2P          Yes         Up      Up
meshP2pLsp2-10.20.1.4-61444        MeshP2P          Yes         Up      Up
meshP2pLsp2-10.20.1.5-61445        MeshP2P          Yes         Up      Up
meshP2pLsp2-10.20.1.6-61446        MeshP2P          Yes         Up      Up
meshP2pLsp10-10.20.1.1-61447       MeshP2P          Yes         Up      Up
meshP2pLsp10-10.20.1.2-61448       MeshP2P          Yes         Up      Up 

bypass-tunnel

Syntax 
bypass-tunnel [to ip-address] [protected-lsp [name]] [dynamic | manual | p2mp] [detail] [lsp-name session-name]
Context 
show>router>mpls
Description 

If fast reroute is enabled on an LSP and the facility method is selected, instead of creating a separate LSP for every LSP that is to be backed up, a single LSP is created which serves as a backup for a set of LSPs. Such an LSP tunnel is called a bypass tunnel.

Parameters 
ip-address—
Specifies the IP address of the egress router.
name—
Specifies the name of the LSP protected by the bypass tunnel up to 160 characters in length. “*” is accepted as a wild card character.
dynamic—
Displays dynamically-assigned labels for bypass protection.
manual—
Displays manually-assigned labels for bypass protection.
detail—
Displays detailed information.
p2mp—
Displays P2MP bypass tunnel information.
session-name—
Specifies the session name, up to 160 characters, of the LSP used in the path. “*” can be used as a wildcard character.
Output 

MPLS Bypass Tunnel Output Fields

Table 17 describes MPLS bypass tunnel output fields.

Table 17:  MPLS Bypass Tunnel Output Fields 

Label

Description

To

The system IP address of the egress router.

State

The LSP’s administrative state.

Out I/F

Specifies the name of the network IP interface.

Out Label

Specifies the incoming MPLS label on which to match.

Reserved BW (kb/s)

Specifies the amount of bandwidth in Mb/s reserved for the LSP.

Sample Output
*A:Dut-B# show router mpls bypass-tunnel detail
 
=======================================================================
MPLS Bypass Tunnels (Detail)
=======================================================================
-----------------------------------------------------------------------
bypass-node10.20.1.4
-----------------------------------------------------------------------
To              : 10.20.1.7          State               : Up
Out I/F         : 1/1/4              Out Label           : 131071
Up Time         : 0d 01:17:22        Active Time         : n/a
Reserved BW     : 0 Kbps             Protected LSP Count : 1
Type            : Dynamic
Setup Priority  : 7                  Hold Priority       : 0
Class Type      : 0
Exclude Node    : 10.20.1.4          Inter-Area          : True
Computed Hops   :
    10.10.8.2(S)                     Egress Admin Groups : None
-> 10.10.8.6(SA)                    Egress Admin Groups : None
-> 10.20.1.7(L)                     Egress Admin Groups : None
Actual Hops     :
    10.10.8.2(10.20.1.2)             Record Label        : N/A
-> 10.10.8.6(10.20.1.6)             Record Label        : 131071
-> 10.20.1.7(10.20.1.7)             Record Label        : 131068
-> 10.10.22.7                       Record Label        : 131068
 
=======================================================================
 
 
*A:Dut-A>config>router>mpls>lsp$ /show router mpls bypass-tunnel detail 
 
=======================================================================
MPLS Bypass Tunnels (Detail)
=======================================================================
-----------------------------------------------------------------------
bypass-node10.20.1.2
-----------------------------------------------------------------------
To              : 10.20.1.4          State               : Up
Out I/F         : 1/1/2              Out Label           : 131070
Up Time         : 0d 00:00:18        Active Time         : n/a
Reserved BW     : 0 Kbps             Protected LSP Count : 1
Type            : Dynamic            
Setup Priority  : 7                  Hold Priority       : 0
Class Type      : 0                  
Exclude Node    : None               Inter-Area          : False
Computed Hops   :                    
    10.20.1.1, If Index : 3(S)       Egress Admin Groups : None
-> 10.20.1.3, If Index : 2(S)       Egress Admin Groups : None
-> 10.20.1.4, If Index : 5(S)       Egress Admin Groups : None
Actual Hops     :                    
    10.20.1.1, If Index : 3          Record Label        : N/A
-> 10.20.1.3, If Index : 2          Record Label        : 131070
-> 10.20.1.4, If Index : 5          Record Label        : 131070
 
=======================================================================
 
B:Dut-B>config>router>mpls>lsp# show router mpls bypass-tunnel detail
 
=======================================================================
MPLS Bypass Tunnels (Detail)
=======================================================================
-----------------------------------------------------------------------
bypass-node10.20.1.4
-----------------------------------------------------------------------
To              : 10.10.10.6         State               : Up
Out I/F         : lag-1              Out Label           : 131071
Up Time         : 0d 00:00:06        Active Time         : n/a
Reserved BW     : 0 Kbps             Protected LSP Count : 1
Type            : Dynamic
Setup Priority  : 7                  Hold Priority       : 0
Class Type      : 0
Exclude Node    : None
Actual Hops     :
    10.10.12.2(S)                     Egress Admin Groups:
                                      lime
                                      olive
                                      blue
                                      black
                                      acqua
-> 10.10.12.3(S)                     Egress Admin Groups:
                                      olive
                                      Unknown Group 9
                                      Unknown Group 11
                                      black
                                      Unknown Group 16
                                      Unknown Group 18
-> 10.10.5.5(S)                      Egress Admin Groups:
                                      purple
                                      Unknown Group 7
                                      Unknown Group 11
                                      orange
                                      acqua
                                      Unknown Group 16
                                      Unknown Group 19
                                      Unknown Group 21
                                      Unknown Group 22
                                      Unknown Group 26
                                      khaki
-> 10.10.10.6(S)                     Egress Admin Groups: None
 
=======================================================================:
 
 
*A:SRU4>show>router>mpls# bypass-tunnel
===============================================================================
MPLS Bypass Tunnels
===============================================================================
Legend :  m - Manual      d - Dynamic      p - P2mp
===============================================================================
To              State  Out I/F        Out Label     Reserved   Protected  Type
                                                    BW (Kbps)  LSP Count
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
*A:SRU4>show>router>mpls#
 
 
*A:Dut-B# show router mpls bypass-tunnel detail 
==============================================================================
MPLS Bypass Tunnels (Detail)
==============================================================================
bypass-link10.10.104.4
------------------------------------------------------------------------------
To              : 10.10.101.4        State               : Up                  
Out I/F         : 1/1/2:1            Out Label           : 129994              
Up Time         : 0d 00:02:33        Active Time         : n/a                 
Reserved BW     : 0 Kbps             Protected LSP Count : 1                   
Type            : Dynamic                                                      
SetupPriority   : 7                  Hold Priority       : 0                   
Class Type      : 0                                                            
Actual Hops     :                                                              
    10.10.101.2     -> 10.10.101.4 
==============================================================================
*A:Dut-B#
 
 
*A:Dut-B# show router mpls bypass-tunnel detail 
==============================================================================
MPLS Bypass Tunnels (Detail)
------------------------------------------------------------------------------
bypass-link10.10.104.4
------------------------------------------------------------------------------
To              : 10.10.101.4        State               : Up                  
Out I/F         : 1/1/2:1            Out Label           : 129994              
Up Time         : 0d 00:02:33        Active Time         : n/a                 
Reserved BW     : 0 Kbps             Protected LSP Count : 1                   
Type            : Dynamic                                                      
SetupPriority   : 7                  Hold Priority       : 0                   
Class Type      : 0                                                            
Actual Hops     :                                                              
    10.10.101.2     -> 10.10.101.4    
==============================================================================
*A:Dut-B#
 
 

class-forwarding-policy

Syntax 
class-forwarding-policy [policy-name]
Context 
show>router>mpls
Description 

This command displays the mapping of the Forwarding Classes (FCs) to the set IDs as well as the default set ID of the CBF policy. It also shows the number of MPLS LSPs that reference this CBF policy.

Parameters 
policy-name—
Specifies the name of the class-forwarding-policy, up to 256 characters and composed of printable, 7-bit ASCII characters excluding double quotes. If the string contains spaces, use double quotes to delimit the start and end of the string.
Output 

Sample Output
*A:Dut-B>show>router# show router mpls class-forwarding-policy "policy1" 
==============================================================================
MPLS Class Forwarding Policy Table
==============================================================================
Policy Name                      Default  Forwarding Class Set-id  Ref
                                 Set-Id   be l2 af l1 h2 ef h1 nc  Count
------------------------------------------------------------------------------
policy1                            3      1  1  2  2  3  3  4  4   50
------------------------------------------------------------------------------
No. of Forwarding Policies: 1
==============================================================================

interface

Syntax 
interface [ip-int-name | ip-address] [label-map label]
interface [ip-int-name | ip-address] statistics [aux-stats]
Context 
show>router>mpls
Description 

This command displays MPLS interface information.

Parameters 
ip-int-name—
Specifies the name of the network IP interface. An interface name cannot be in the form of an IP address. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.
ip-address—
Specifies the system or network interface IP address.
label-map label—
Specifies the MPLS label on which to match.
Values—
32 to 1048575

 

statistics—
Displays the MPLS interface name and the number of packets and octets sent and received on an MPLS interface.
aux-stats—
Displays auxiliary MPLS statistics next to the default MPLS statistics.
Output 

MPLS Interface Output Fields

Table 18 describes MPLS interface output fields.

Table 18:  MPLS Interface Output Fields 

Label

Description  

Interface

The interface name.

Port-id

The port ID.

Adm

Specifies the administrative state of the interface.

Opr

Specifies the operational state of the interface.

Te-metric

Specifies the traffic engineering metric used on the interface.

Srlg Groups

Specifies the shared risk loss group (SRLG) name(s).

Interfaces

The total number of interfaces.

Transmitted

Displays the number of packets and octets transmitted from the interface.

Received

Displays the number of packets and octets received.

In Label

Specifies the ingress label.

In I/F

Specifies the ingress interface.

Out Label

Specifies the egress label.

Out I/F

Specifies the egress interface.

Next Hop

Specifies the next hop IP address for the static LSP.

Type

Specifies whether the label value is statically or dynamically assigned.

Sample Output
*A:SRU4>config>router>mpls# show router mpls interface
===============================================================================
MPLS Interfaces
===============================================================================
Interface                           Port-id           Adm    Opr    TE-metric
-------------------------------------------------------------------------------
system                              system            Up     Up     None
  Admin Groups                      None
  Srlg Groups                       None
sr4-1                               1/1/4             Up     Up     None
  Admin Groups                      None
  Srlg Groups                       3440
ess-7-1                             3/2/4             Up     Up     None
  Admin Groups                      None
  Srlg Groups                       45100
ess-7-2                             3/2/5             Up     Up     None
  Admin Groups                      None
  Srlg Groups                       45110
...
g7600                               3/1/2             Up     Up     None
  Admin Groups                      None
  Srlg Groups                       41.80
m160                                3/2/1             Up     Up     None
  Admin Groups                      None
  Srlg Groups                       420.40
-------------------------------------------------------------------------------
Interfaces : 35
===============================================================================
*A:SRU4>config>router>mpls#
 
 
*A:SRU4>config>router>mpls#  show router mpls interface "hubA"
===============================================================================
MPLS Interface : hubA
===============================================================================
Interface                           Port-id           Adm    Opr    TE-metric
-------------------------------------------------------------------------------
hubA                                3/2/8             Up     Up     None
  Admin Groups                      None
  Srlg Groups                       44.200
-------------------------------------------------------------------------------
Interfaces : 1
===============================================================================
*A:SRU4>config>router>mpls#
 
 
*A:SRU4>config>router>mpls#  show router mpls interface "hubA" label-map 203
===============================================================================
MPLS Interface : hubA (Label-Map 203)
===============================================================================
In Label  In I/F     Out Label Out I/F    Next Hop          Type      Adm  Opr
-------------------------------------------------------------------------------
203       3/2/8      403       1/1/9      10.22.10.3        Static    Up   Up
-------------------------------------------------------------------------------
Interfaces : 1
===============================================================================
*A:SRU4>config>router>mpls#
 
 
*A:SRU4>config>router>mpls# show router mpls interface statistics
===============================================================================
MPLS Interface (statistics)
===============================================================================
Interface      : aps-1
  Transmitted  : Pkts - 76554                 Octets - 7930285
  Received     : Pkts - 17068                 Octets - 3626842
 
Interface      : aps-2
  Transmitted  : Pkts - 0                     Octets - 0
  Received     : Pkts - 1311                  Octets - 219888
 
Interface      : aps-3
  Transmitted  : Pkts - 0                     Octets - 0
  Received     : Pkts - 3                     Octets - 234
 
Interface      : sr4-1
  Transmitted  : Pkts - 0                     Octets - 0
  Received     : Pkts - 0                     Octets - 0
 
Interface      : ess-7-1
  Transmitted  : Pkts - 113537                Octets - 15058332
  Received     : Pkts - 13193                 Octets - 1091492
 
Interface      : ess-7-2
  Transmitted  : Pkts - 166133                Octets - 22762482
  Received     : Pkts - 16672                 Octets - 1368464
 
Interface      : ess-7-3
  Transmitted  : Pkts - 122934                Octets - 11033246
  Received     : Pkts - 12256                 Octets - 1026826 
...
 
Interface      : m160
  Transmitted  : Pkts - 17188024              Octets - 2183076528
  Received     : Pkts - 677745                Octets - 59367236
===============================================================================
*A:SRU4>config>router>mpls#
 
show router mpls interface statistics aux-stats
===============================================================================
MPLS Interface (statistics)
===============================================================================
Interface     : intf1
  Transmitted : Pkts - 0        Octets - 0
  Received    : Pkts - 0        Octets - 0
  Transmitted : SR-Pkts - 0     SR-Octets - 0
  Received    : SR-Pkts - 0     SR-Octets - 0
 
Interface     : intf2
  Transmitted : Pkts - 0        Octets - 0
  Received    : Pkts - 0        Octets - 0
  Transmitted : SR-Pkts - 0     SR-Octets - 0
  Received    : SR-Pkts - 0     SR-Octets - 0

ingress-stats-template

Syntax 
ingress-stats-template [type {p2p | p2mp}] [SessionNameString] [sender ip-address] [detail]
Context 
show>router>mpls
Description 

This command displays ingress statistics template details.

Parameters 
SessionNameString—
Displays the session name, up to 64 characters.
ip-address
Displays the sender IP address.
detail—
Displays the number of static LSPs that terminate at the router.
Output 

MPLS Ingress Statistics Template Output

Table 19 describes MPLS Ingress Statistics Template output fields.

Sample Output
*A:cses-V23# show router mpls ingress-stats-template
===============================================================================
MPLS LSP Template Ingress Stats
===============================================================================
Session Name                            Type      Sender         Session Count
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
Table 19:  Ingress Stats Template Output Fields 

Label

Description 

Session Name

Specifies the session name.

Type

p2p – Specifies that p2p is the ingress stats template type

p2mp – Specifies that p2mp is the ingress stats template type

Sender

Specifies the sender IP address.

Session Count

Specifies the session count.

No Matching Entries Found

Specifies the number of matching entries.

lsp

Syntax 
lsp [lsp-name] [status {up | down}] [from ip-address | to ip-address] [detail] [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp {transit | terminate} [status {up | down}] [from ip-address | to ip-address | lsp-name name] [detail]
lsp count
lsp [lsp-name] activepath [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] path [path-name] [status {up | down}] [detail] [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] path [path-name] mbb [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] auto-bandwidth [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] path [path-name] mbb
Context 
show>router>mpls
Description 

This command displays LSP details.

Parameters 
lsp-name—
Specifies the name of the LSP used in the path up to 64 characters in length.
status up—
Displays an LSP that is operationally up.
status down—
Displays an LSP that is operationally down.
from ip-address
Displays the IP address of the ingress router for the LSP.
to ip-address
Displays the IP address of the egress router for the LSP.
transit—
Displays the number of static LSPs that transit through the router.
terminate—
Displays the number of static LSPs that terminate at the router.
lsp count—
Displays the total number of LSPs.
activepath—
Displays the present path being used to forward traffic.
mbb—
Displays make-before-break (MBB) information.
detail—
Displays detailed information.
Output 

MPLS LSP Output

Table 20 describes MPLS LSP output fields.

Table 20:  MPLS LSP Output Fields 

Label

Description  

LSP Name

The name of the LSP used in the path.

To

The system IP address of the egress router for the LSP.

Adm State

Down — The path is administratively disabled.

Up — The path is administratively enabled.

Oper State

Down — The path is operationally down.

Up — The path is operationally up.

LSPs

The total number of LSPs configured.

From

The IP address of the ingress router for the LSP.

LSP Up Time

The length of time the LSP has been operational.

Transitions

The number of transitions that have occurred for the LSP.

Retry Limit

The number of attempts that the software should make to re-establish the LSP after it has failed.

Signaling

Specifies the signaling style.

Hop Limit

The maximum number of hops that an LSP can traverse, including the ingress and egress routers.

Fast Reroute/FastFail Config

enabled — Fast reroute is enabled. In the event of a failure, traffic is immediately rerouted on the pre-computed detour LSP, thus minimizing packet loss.

disabled — There is no detour LSP from each node on the primary path.

ADSPEC

enabled — The LSP will include advertising data (ADSPEC) objects in RSVP messages.

disabled — The LSP will not include advertising data (ADSPEC) objects in RSVP messages.

Primary

The preferred path for the LSP.

Secondary

The alternate path that the LSP will use if the primary path is not available.

Bandwidth

The amount of bandwidth in Mb/s reserved for the LSP path.

LSP Up Time

The total time in increments that the LSP path has been operational.

LSP Tunnel ID

The value which identifies the label switched path that is signaled for this entry.

To

The IP address of the egress router for the LSP.

LSP Down Time

The total time in increments that the LSP path has not been operational.

Path Changes

The number of path changes this LSP has had. For every path change (path down, path up, path change), a corresponding syslog/trap (if enabled) is generated.

Retry Timer

The time in s, for LSP re-establishment attempts after an LSP failure.

Resv Style

se — Specifies a shared reservation environment with a limited reservation scope. This reservation style creates a single reservation over a link that is shared by an explicit list of senders.

ff — Specifies a shared reservation environment with an explicit reservation scope. Specifies an explicit list of senders and a distinct reservation for each of them.

Negotiated MTU

The size of the maximum transmission unit (MTU) that is negotiated during establishment of the LSP.

FR Hop Limit

The total number of hops a detour LSP can take before merging back onto the main LSP path.

LastResignalAttempt

Displays the system up time when the last attempt to resignal this LSP was made.

MBB Type

Displays an enumerated integer that specifies the type of make-before-break (MBB). If none displays then there is no MBB in progress or no last MBB.

MBB State

Displays the state of the most recent invocation of the make-before-break functionality.

End at

Displays the system up time when the last MBB ended.

Old Metric

Displays the cost of the traffic engineered path for the LSP path prior to MBB.

NextRetryIn

Displays the amount of time (in s) remaining, before the next attempt is made to retry the in-progress MBB.

RetryAttempt

Displays the number attempts for the MBB is in progress.

Failure Code

Displays the reason code for in-progress MBB failure. A value of none indicates that no failure has occurred.

Failure Node

Displays the IP address of the node in the LSP path at which the in-progress MBB failed. When no failure has occurred, this value is none.

Sample Output
*A:SetupCLI# show router mpls lsp "lsp_1" path "500" detail
===============================================================================
MPLS LSP lsp_1 Path 500 (Detail)
===============================================================================
Legend :
    @ - Detour Available              # - Detour In Use
    b - Bandwidth Protected           n - Node Protected
    s - Soft Preemption
    S - Strict                        L - Loose
    A - ABR
===============================================================================
-------------------------------------------------------------------------------
LSP lsp_1 Path 500
-------------------------------------------------------------------------------
LSP Name         : lsp_1
Path LSP ID      : 38400
From             : 10.10.1.1            To                   : 10.10.1.2
Admin State      : Up                   Oper State           : Down
Path Name        : 500                  Path Type            : Primary
Path Admin       : Up                   Path Oper            : Down
Out Interface    : n/a                  Out Label            : n/a
Path Up Time     : 0d 00:00:00          Path Down Time       : 0d 00:00:43
Retry Limit      : 0                    Retry Timer          : 30 sec
Retry Attempt    : 2                    Next Retry In        : 19 sec
BFD Template     : None                 BFD Ping Interval    : 60
BFD Enable       : FALSE                BFD failure-action   : down
 
Adspec           : Disabled             Oper Adspec          : N/A
CSPF             : Disabled             Oper CSPF            : N/A
Least Fill       : Disabled             Oper LeastFill       : N/A
FRR              : Disabled             Oper FRR             : N/A
Prop Adm Grp     : Disabled             Oper Prop AG         : N/A
Inter-area       : N/A
 
Neg MTU          : 0                    Oper MTU             : N/A
Bandwidth        : No Reservation       Oper Bw              : N/A
Hop Limit        : 255                  Oper HopLimit        : N/A
Record Route     : Record               Oper Rec Route       : N/A
Record Label     : No Record            Oper Rec Label       : N/A
Setup Priority   : 7                    Oper Setup Priority  : N/A
Hold Priority    : 7                    Oper Hold Priority   : N/A
Class Type       : 7                    Oper CT              : N/A
Backup CT        : 5
MainCT Retry     : 500
    Rem          :
MainCT Retry     : 500
    Limit        :
Include Grps     :                      Oper InclGrps        :
None                                           N/A
Exclude Grps     :                      Oper ExclGrps        :
None                                           N/A
 
Adaptive         : Enabled              Oper Metric          : N/A
Preference       : n/a
Path Trans       : 0                    CSPF Queries         : 0
Failure Code     : noResourcesAvailable
Failure Node     : 10.1.255.255
Explicit Hops    :
    No Hops Specified
Actual Hops      :
    No Hops Specified
Resignal Eligible: False
Last Resignal    : n/a                  CSPF Metric          : N/A
===============================================================================
 
 
*A:Dut-A>config>router>mpls>lsp$ /show router mpls lsp "1" path detail 
=======================================================================
MPLS LSP 1 Path  (Detail)
=======================================================================
Legend : 
    @ - Detour Available              # - Detour In Use
    b - Bandwidth Protected           n - Node Protected
    s - Soft Preemption           
    S - Strict                        L - Loose
    A - ABR
=======================================================================
-----------------------------------------------------------------------
LSP 1 Path 1
-----------------------------------------------------------------------
LSP Name    : 1                                  Path LSP ID : 30208
From        : 10.20.1.1                          To          : 10.20.1.6
Adm State   : Up                                 Oper State  : Up
Path Name   : 1                                  Path Type   : Primary
Path Admin  : Up                                 Path Oper   : Up
OutInterface: 1/1/1                              Out Label   : 131071
Path Up Time: 0d 00:00:05                        Path Dn Time: 0d 00:00:00
Retry Limit : 0                                  Retry Timer : 30 sec
RetryAttempt: 0                                  NextRetryIn : 0 sec 
 
Adspec      : Disabled                           Oper Adspec : Disabled
CSPF        : Enabled                            Oper CSPF   : Enabled
Least Fill  : Disabled                           Oper LeastF*: Disabled
FRR         : Enabled                            Oper FRR    : Enabled
FRR NodePro*: Enabled                            Oper FRR NP : Enabled
FR Hop Limit: 16                                 Oper FRHopL*: 16
FR Prop Adm*: Disabled                           Oper FRProp*: Disabled
Prop Adm Grp: Disabled                           Oper PropAG : Disabled
Inter-area  : False                              
 
Neg MTU     : 1496                               Oper MTU    : 1496
Bandwidth   : No Reservation                     Oper Bw     : 0 Mbps
Hop Limit   : 255                                Oper HopLim*: 255
Record Route: Record                             Oper RecRou*: Record
Record Label: Record                             Oper RecLab*: Record
SetupPriori*: 7                                  Oper SetupP*: 7
Hold Priori*: 0                                  Oper HoldPr*: 0
Class Type  : 0                                  Oper CT     : 0
Backup CT   : None                               
MainCT Retry: n/a                                
    Rem     :                                    
MainCT Retry: 0                                  
    Limit   :                                    
Include Grps:                                    Oper InclGr*:  
None                                           None
Exclude Grps:                                    Oper ExclGr*:  
None                                           None
 
Adaptive    : Enabled                            Oper Metric : 3000
Preference  : n/a                                
Path Trans  : 1                                  CSPF Queries: 1
Failure Code: noError                            Failure Node: n/a
ExplicitHops:                                    
    No Hops Specified
Actual Hops :                                    
    10.20.1.1, If Index : 2 @ n                  Record Label        : N/A
-> 10.20.1.2, If Index : 2 @ n                  Record Label        : 131071
-> 10.20.1.4, If Index : 2                      Record Label        : 131071
-> 10.20.1.6, If Index : 2                      Record Label        : 131071
ComputedHops:                                    
    10.20.1.1, If Index : 2(S)    
 -> 10.20.1.2, If Index : 2(S)    
 -> 10.20.1.4, If Index : 2(S)    
 -> 10.20.1.6, If Index : 2(S)    
ResigEligib*: False                              
LastResignal: n/a                                CSPF Metric : 3000
=======================================================================
* indicates that the corresponding row element may have been truncated.
 
*A:Dut-C# show router mpls lsp detail
=======================================================================
MPLS LSPs (Originating) (Detail)
=======================================================================
-----------------------------------------------------------------------
Type : Originating
-----------------------------------------------------------------------
LSP Name    : to_D_10.20.1.4_viaBD
LSP Type    : RegularLsp                       LSP Tunnel ID  : 1
From        : 10.20.1.3                        To             : 10.20.1.4
Adm State   : Up                               Oper State     : Up
LSP Up Time : 0d 00:05:38                      LSP Down Time  : 0d 00:00:00
Transitions : 1                                Path Changes   : 1
Retry Limit : 0                                Retry Timer    : 30 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : 1500
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Disabled                         Oper FR        : Disabled
CSPF        : Enabled                          ADSPEC         : Disabled
Metric      : 0                                Use TE metric  : Disabled
Include Grps:                                  Exclude Grps   :
None                                           None
Least Fill  : Disabled
 
Auto BW     : Disabled
LdpOverRsvp : Enabled                          VprnAutoBind   : Enabled
IGP Shortcut: Enabled                          BGP Shortcut   : Enabled
IGP LFA     : Disabled                         IGP Rel Metric : -1
BGPTransTun : Enabled
Oper Metric : 20
Prop Adm Grp: Disabled
 
Primary(a)  : to_D_10.20.1.4_viaBD             Up Time        : 0d 00:05:38
Bandwidth   : 0 Mbps
=======================================================================
*A:Dut-C#
 
*A:Dut-C# show router mpls lsp "lspE" detail 
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name    : lspE
LSP Type    : RegularLsp                       LSP Tunnel ID  : 1005
LSP Index   : 1005                             TTM Tunnel Id  : 1005
From        : 10.20.1.3                        To             : 10.20.1.5
Adm State   : Up                               Oper State     : Up
LSP Up Time : 0d 00:19:23                      LSP Down Time  : 0d 00:00:00
Transitions : 1                                Path Changes   : 1
Retry Limit : 0                                Retry Timer    : 20 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : 1500
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Disabled                         Oper FR        : Disabled
CSPF        : Disabled                         ADSPEC         : Disabled
Metric      : N/A                             
Load Bal Wt : N/A                              ClassForwarding: Disabled
Include Grps:                                  Exclude Grps   : 
None                                           None
Least Fill  : Disabled                        
BFD Template: None                             BFD Ping Intvl : 60
BFD Enable  : FALSE                            BFD failure-ac*: down
 
Revert Timer: Disabled                         Next Revert In : N/A
EntropyLbl  : Inherited                        Oper EntropyLbl: Enabled
Auto BW     : Disabled                        
LdpOverRsvp : Enabled                         
VprnAutoBind: Enabled                         
IGP Shortcut: Enabled                          BGP Shortcut   : Enabled
IGP LFA     : Disabled                         IGP Rel Metric : Disabled
BGPTransTun : Enabled                         
Oper Metric : 16777215                        
Prop Adm Grp: Disabled                        
 
Primary(a)  : E1                               Up Time        : 0d 00:19:32
Bandwidth   : 0 Mbps                          
Standby     : E2                               Down Time      : 0d 00:19:46
Bandwidth   : 0 Mbps                          
===============================================================================
 
 
A:sim1>config>router>mpls>lsp$ show router mpls lsp path detail
========================================================================
MPLS LSP  Path  (Detail)
===============================================================================
Legend :
    @ - Detour Available              # - Detour In Use
    b - Bandwidth Protected           n - Node Protected
    s - Soft Preemption
    S - Strict                        L - Loose
========================================================================
------------------------------------------------------------------------
LSP l1 Path 1
------------------------------------------------------------------------
LSP Name    : l1                                 Path LSP ID : 30208
From        : 10.20.1.1                          To          : 10.20.1.3
Adm State   : Up                                 Oper State  : Down
Path Name   : 1                                  Path Type   : 
Primary
Path Admin  : Up                                 Path Oper   : Down
OutInterface: n/a                                Out Label   : n/a
Path Up Time: 0d 00:00:00                        Path Dn Time: 0d 00:00:02
Retry Limit : 0                                  Retry Timer : 30 sec
RetryAttempt: 0                                  NextRetryIn : 7 sec (Fast)
SetupPriori*: 7                                  Hold Priori*: 0
Preference  : n/a
Bandwidth   : No Reservation                     Oper Bw     : 0 Mbps
Hop Limit   : 255                                Class Type  : 0
Backup CT   : None
MainCT Retry: n/a                                MainCT Retry: 0
    Rem     :                                        Limit   :
Oper CT     : None
Record Route: Record                             Record Label: Record
Oper MTU    : 0                                  Neg MTU     : 0
Adaptive    : Enabled                            Oper Metric : 65535
Include Grps:                                    Exclude Grps:
None                                           None
Path Trans  : 2                                  CSPF Queries: 0
Failure Code: noError                            Failure Node: n/a
ExplicitHops:
    10.20.1.2(S)
Actual Hops :
    No Hops Specified
ResigEligib*: False
LastResignal: n/a                                CSPF Metric : 0
========================================================================
 
 
*A:SRU4>config>router>mpls# show router mpls lsp path
===============================================================================
MPLS LSP  Path  (Detail)
===============================================================================
Legend :
    @ - Detour Available              # - Detour In Use
    b - Bandwidth Protected           n - Node Protected
    s - Soft Preemption
    S - Strict                        L - loose
===============================================================================
ExplicitHops:
    10.20.1.3(L)       -> 10.20.1.4(S)
Actual Hops :
    10.10.1.1(10.20.1.1)                         Record Label    : N/A
 -> 10.10.1.2(10.20.1.2)                         Record Label    : 131071
 -> 10.10.5.3(10.20.1.3)                         Record Label    : 131071
 -> 10.10.7.4(10.20.1.4)                         Record Label    : 131071
 -> 10.10.8.5(10.20.1.5)                         Record Label    : 131071
ComputedHops:
    10.10.1.1(S)       -> 10.10.1.2(S)       -> 10.10.5.3(S)
 -> 10.20.1.4(S)       -> 10.20.1.5(L)
===============================================================================
 
 
*A:SRU4>config>router>mpls# show router mpls lsp
===============================================================================
MPLS LSPs (Originating)
===============================================================================
LSP Name                           To                Fastfail     Adm   Opr
                                                     Config
-------------------------------------------------------------------------------
to_10_30_1_1_cspf                 10.30.1.1          No           Up    Up
to_10_30_1_2_cspf                 10.30.1.2          No           Up    Dwn
to_10_30_1_3_cspf                 10.30.1.3          No           Up    Up
to_10_30_1_4_cspf                 10.30.1.4          No           Up    Dwn
to_10_30_1_5_cspf                 10.30.1.5          No           Up    Up
to_10_30_1_6_cspf                 10.30.1.6          No           Up    Dwn
to_10_30_1_110_cspf               10.30.1.110        No           Up    Up
to_10_8_100_15_cspf               10.8.100.15        No           Up    Dwn
to_10_20_1_20_cspf                10.20.1.20         No           Up    Up
to_10_20_1_22_cspf                10.20.1.22         No           Up    Up
to_10_100_1_1_cspf                10.100.1.1         No           Up    Dwn
to_10_30_1_1_cspf_2               10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_3               10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_4               10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_5               10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_6               10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_7               10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_8               10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_9               10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_10              10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_11              10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_12              10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_13              10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_14              10.30.1.1          No           Up    Up
to_10_30_1_1_cspf_15              10.30.1.1          No           Up    Up
...
-------------------------------------------------------------------------------
LSPs : 201
===============================================================================
*A:SRU4>config>router>mpls#
Table 21:  LSP Detail Output Fields 

Label

Description 

Auto BW

Enabled — Auto-bandwidth adjustment is configured on this LSP.

AB OpState

Up – Auto-bandwidth is operationally enabled on this LSP

Down – Auto-bandwidth is operationally disabled on this LSP

Auto BW Min

The minimum bandwidth of the LSP that auto-bandwidth can request (in Mb/s).

Auto BW Max

The maximum bandwidth of the LSP that auto-bandwidth can request (in Mb/s).

AB Up Thresh

The percent threshold for increasing LSP bandwidth.

AB Down Thresh

The percent threshold for decreasing LSP bandwidth.

AB Up BW

The absolute bandwidth threshold for increasing LSP bandwidth (in Mb/s).

AB Down BW

The absolute bandwidth threshold for decreasing LSP bandwidth (in Mb/s).

AB Coll Intv

The auto-bandwidth collection interval.

AB Adj Mul

The adjust-multiplier for this LSP (may be configured or inherited).

AB Samp Mul

The sample-multiplier for this LSP (may be configured or inherited).

AB Adj Time

The adjust-multiplier times the collection-interval (in min).

AB Sample Time

The sample-multiplier times the collection-interval (in min).

AB Adj Cnt

The adjust count (number of whole collection intervals since the start of the current adjust interval).

AB Samp Cnt

The sample count (number of whole collection intervals since the start of the current sample interval).

AB Last Adj

The system time of the last auto-bandwidth adjustment.

AB Next Adj

The approximate remaining time in the current adjust interval (adjust-multiplier – adjust count) times the collection interval (in min). This overstates the actual remaining time because the elapsed time in the current collection interval is not accounted for.

AB Adj Cause

The cause of the last auto-bandwidth adjustment:

  1. none – no adjustment has occurred
  2. manual
  3. adj-count
  4. overflow

AB Max AvgR*

The maximum average data rate in any sample interval of the current adjust interval.

AB Lst AvgR*

The average data rate measured in the sample interval that ended most recently.

AB Ovfl Lmt

The configured value of the auto-bandwidth overflow-limit.

AB Ovfl Cnt

The number of overflow samples since the last reset.

ABOvflThres

The percent threshold for declaring an overflow sample.

AB Ovfl BW

The absolute bandwidth threshold for declaring an overflow sample (in Mb/s).

AB Monitor BW

True – monitor bandwidth is enabled on the LSP.

False – monitor bandwidth is not enabled on the LSP.

BFD Enable

The operational state of BFD on the LSP.

BFD failure-action

The failure action that is configured for the BFD LSP.

*A:SRU4>config>router>mpls#   show router mpls lsp "to_10_30_1_1_cspf"
===============================================================================
MPLS LSPs (Originating)
===============================================================================
LSP Name                           To                  Fastfail     Adm   Opr
                                                       Config
-------------------------------------------------------------------------------
to_10_30_1_1_cspf                 10.30.1.1          No           Up    Up
-------------------------------------------------------------------------------
LSPs : 1
===============================================================================
*A:SRU4>config>router>mpls#
 
 
*A:SRU4>config>router>mpls# show router mpls lsp "to_10_30_1_1_cspf" detail
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name    : to_10_30_1_1_cspf
LSP Type    : RegularLsp                       LSP Tunnel ID  : 1
From        : 10.30.1.4
Adm State   : Up                               Oper State     : Up
LSP Up Time : 0d 01:47:02                      LSP Down Time  : 0d 00:00:00
Transitions : 11                               Path Changes   : 11
Retry Limit : 0                                Retry Timer    : 30 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : 1500
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Disabled                         Oper FR        : Disabled
CSPF        : Enabled                          ADSPEC         : Disabled
Metric      : 0                                Use TE metric  : Disabled
Include Grps:                                  Exclude Grps   :
None                                           None
Least Fill  : Disabled
LdpOverRsvp : Enabled                          VprnAutoBind   : Enabled
IGP Shortcut: Enabled
Oper Metric : 1001
 
Primary(a)  : to_10_30_1_1                    Up Time        : 0d 01:47:02
Bandwidth   : 0 Mbps
===============================================================================
*A:SRU4>config>router>mpls#
 
 
*A:SRU4>config>router>mpls# show router mpls lsp detail to 10.30.1.2
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name    : 1
LSP Type    : RegularLsp                       LSP Tunnel ID  : 1
From        : 0.0.0.0
Adm State   : Down                             Oper State     : Down
LSP Up Time : 0d 00:00:00                      LSP Down Time  : 0d 00:00:07
Transitions : 0                                Path Changes   : 0
Retry Limit : 0                                Retry Timer    : 30 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : 0
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Disabled                         Oper FR        : Disabled
CSPF        : Disabled                         ADSPEC         : Disabled
Metric      : 0
Include Grps:                                  Exclude Grps   :
None                                           None
Least Fill  : Disabled
 
Auto BW     : Enabled                          AB OpState     : Down
Auto BW Min : 0 Mbps                           Auto BW Max    : 100000 Mbps
AB Up Thresh: 5 percent                        AB Down Thresh : 5 percent
AB Up BW    : 0 Mbps                           AB Down BW     : 0 Mbps
AB Curr BW  : 0 Mbps                           AB Samp Intv   : 0
AB Adj Mul  : 288+                             AB Samp Mul    : 1+
AB Adj Time : 0 Mins                           AB Samp Time   : 0 Mins
AB Adj Cnt  : 0                                AB Samp Cnt    : 0
AB Last Adj : n/a                              AB Next Adj    : 0 Mins
ABMaxAvgRt  : 0 Mbps                           AB Lst AvgRt   : 0 Mbps
AB Ovfl Lmt : 0                                AB Ovfl Cnt    : 0
ABOvflThres : 0 percent                        AB Ovfl BW     : 0
AB Adj Cause: none                             AB Monitor BW  : False
LdpOverRsvp : Enabled                          VprnAutoBind   : Enabled
IGP Shortcut: Enabled
Oper Metric : 65535
 
+ indicates inherited values
===============================================================================
*A:SRU4>config>router>mpls#
 
 
*A:SRU4>config>router>mpls#    show router mpls lsp count
===============================================================================
MPLS LSP Count
===============================================================================
                    Originate           Transit             Terminate
-------------------------------------------------------------------------------
Static LSPs         0                   136                 0
Dynamic LSPs        140                 421                 1620
Detour LSPs         0                   0                   0
P2MP S2Ls           0                   0                   0
===============================================================================
*A:SRU4>config>router>mpls#
 
*A:Phoneix 199# show router mpls lsp count
===============================================================================
MPLS LSP Count
===============================================================================
                          Originate         Transit           Terminate
-------------------------------------------------------------------------------
Static LSPs               0                 0                 0
Dynamic LSPs              1                 3                 1
Detour LSPs               0                 0                 0
P2MP S2Ls                 0                 0                 0
MPLS-TP LSPs              0                 0                 0
Mesh-P2P LSPs             0                 N/A               N/A
One Hop-P2P LSPs          0                 N/A               N/A
SR-TE LSPs                4                 N/A               N/A
Mesh-P2P SR-TE LSPs       2                 N/A               N/A
One Hop-P2P SR-TE LSPs    0                 N/A               N/A
===============================================================================
 
*A:SRU4>config>router>mpls# show router mpls lsp path mbb
===============================================================================
MPLS LSP Paths
===============================================================================
-------------------------------------------------------------------------------
LSP to_10_30_1_1_cspf Path to_10_30_1_1
-------------------------------------------------------------------------------
LastResignal: n/a                                CSPF Metric : 1001
Last MBB    :
 MBB Type   : TimerBasedResignal                 MBB State   : Fail
 Ended At   : 03/04/2010 09:23:58                Old Metric  : 0
-------------------------------------------------------------------------------
LSP to_10_30_1_2_cspf Path to_10_30_1_2
-------------------------------------------------------------------------------
LastResignal: 03/04/2010 09:23:58                CSPF Metric : 65535
-------------------------------------------------------------------------------
LSP to_10_30_1_3_cspf Path to_10_30_1_3
-------------------------------------------------------------------------------
LastResignal: n/a                                CSPF Metric : 1001
Last MBB    :
 MBB Type   : TimerBasedResignal                 MBB State   : Fail
 Ended At   : 03/04/2010 09:23:58                Old Metric  : 0
-------------------------------------------------------------------------------
LSP to_10_30_1_4_cspf Path to_10_30_1_4
-------------------------------------------------------------------------------
LastResignal: n/a                                CSPF Metric : 0
-------------------------------------------------------------------------------
LSP to_10_30_1_5_cspf Path to_10_30_1_5
-------------------------------------------------------------------------------
...
-------------------------------------------------------------------------------
LastResignal: n/a                                CSPF Metric : 0
-------------------------------------------------------------------------------
LSP to_10_100_1_1_cspf_19 Path to_10_100_1_1
-------------------------------------------------------------------------------
LastResignal: n/a                                CSPF Metric : 0
-------------------------------------------------------------------------------
LSP to_10_100_1_1_cspf_20 Path to_10_100_1_1
-------------------------------------------------------------------------------
LastResignal: n/a                                CSPF Metric : 0
===============================================================================
*A:SRU4>config>router>mpls#
 
 
*A:SRU4>config>router>mpls# show router mpls lsp transit
===============================================================================
MPLS LSPs (Transit)
===============================================================================
Legend :  @ - Active Detour
===============================================================================
From            To              In I/F   Out I/F  State LSP Name
-------------------------------------------------------------------------------
10.30.1.5      10.20.1.22      3/2/1    3/2/7    Up    to_10_20_1_22_cspf::to*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_3::*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_4::*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_2::*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_20:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_18:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_19:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_17:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_16:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_15:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_13:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_14:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_12:*
10.30.1.5      10.20.1.20      3/2/7    3/2/1    Up    to_10_20_1_20_cspf_10:*
...
10.30.1.3      10.20.1.22      aps-1    3/2/7    Up    to_10_20_1_22_cspf_6::*
10.30.1.3      10.20.1.22      aps-1    3/2/7    Up    to_10_20_1_22_cspf::to*
10.30.1.3      10.20.1.22      aps-1    3/2/7    Up    to_10_20_1_22_cspf_9::*
-------------------------------------------------------------------------------
LSPs : 520
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:SRU4>config>router>mpls#
 
*A:SRU4>config>router>mpls# show router mpls lsp terminate
===============================================================================
MPLS LSPs (Terminate)
===============================================================================
Legend :  @ - Active Detour
===============================================================================
From            To              In I/F   Out I/F  State LSP Name
-------------------------------------------------------------------------------
10.30.1.5      10.30.1.4      3/2/1    n/a      Up    b4-1::b4-1
10.30.1.5      10.30.1.4      3/2/7    n/a      Up    gsr::gsr
10.20.1.22     10.30.1.4      3/2/7    n/a      Up    gsr2_t10
10.30.1.6      10.30.1.4      3/2/3:10 n/a      Up    1::2
10.30.1.6      10.30.1.4      3/2/3:3  n/a      Up    1::stby
10.30.1.6      10.30.1.4      3/2/3:10 n/a      Up    2::2
10.30.1.6      10.30.1.4      3/2/3:6  n/a      Up    2::stby
10.30.1.6      10.30.1.4      3/2/3:10 n/a      Up    3::2
10.30.1.6      10.30.1.4      3/2/3:6  n/a      Up    3::stby
...
10.30.1.3      10.30.1.4      aps-1    n/a      Up    to_10_30_1_4_cspf_20:*
10.30.1.3      10.30.1.4      aps-1    n/a      Up    to_10_30_1_4_cspf_4::*
-------------------------------------------------------------------------------
LSPs : 1603
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:SRU4>config>router>mpls#
 
 
*A:SRU4>config>router>mpls# show router mpls lsp terminate detail
===============================================================================
MPLS LSPs (Terminate) (Detail)
===============================================================================
-------------------------------------------------------------------------------
LSP b4-1::b4-1
-------------------------------------------------------------------------------
From                 : 10.30.1.5             To            : 10.30.1.4
State                : Up
SetupPriority        : 7                     Hold Priority : 0
Class Type           : 0
In Interface         : 3/2/1                 In Label      : 131071
Previous Hop         : 10.100.30.20
-------------------------------------------------------------------------------
LSP gsr::gsr
-------------------------------------------------------------------------------
From                 : 10.30.1.5             To            : 10.30.1.4
State                : Up
SetupPriority        : 7                     Hold Priority : 0
Class Type           : 0
In Interface         : 3/2/7                 In Label      : 128547
Previous Hop         : 192.168.60.2
-------------------------------------------------------------------------------
...
-------------------------------------------------------------------------------
From                 : 10.30.1.3             To            : 10.30.1.4
State                : Up
SetupPriority        : 7                     Hold Priority : 0
Class Type           : 0
In Interface         : aps-1                 In Label      : 130409
Previous Hop         : 192.168.0.3
===============================================================================
*A:SRU4>config>router>mpls#
 
*A:Dut-B# show router mpls lsp lsp1 detail  
 
===============================================================================
MPLS LSPs (Originating) (Detail) 
===============================================================================
-------------------------------------------------------------------------------
Type : Originating  
-------------------------------------------------------------------------------
LSP Name        : lsp1
LSP Type        : RegularLsp                LSP Tunnel ID        : 1
LSP Index       : 1                         TTM Tunnel Id        : 1
From            : 10.20.1.2                 To                   : 10.20.1.5
Adm State       : Up                        Oper State           : Up
LSP Up Time     : 0d 00:00:38               LSP Down Time        : 0d 00:00:00
Transitions     : 1                         Path Changes         : 1
Retry Limit     : 0                         Retry Timer          : 20 sec
Signaling       : RSVP                      Resv. Style          : SE
Hop Limit       : 255                       Negotiated MTU       : 1500
Adaptive        : Enabled                   ClassType            : 0
FastReroute     : Disabled                  Oper FR              : Disabled
CSPF            : Enabled                   ADSPEC               : Disabled
Metric          : N/A                       Use TE metric        : Disabled
Load Bal Wt     : N/A                       ClassForwarding      : Disabled
Include Grps    :                           Exclude Grps         :  
None                                           None
Least Fill      : Disabled                  
BFD Template    : bfdTemp1                  BFD Ping Intvl       : 60
BFD Enable      : True                      BFD Failure-action   : Failover
Revert Timer    : Disabled                  Next Revert In       : N/A
Entropy Label   : Inherited                 Oper Entropy Label   : Enabled
Negotiated EL   : Disabled                  
Auto BW         : Disabled                  
LdpOverRsvp     : Enabled                   
VprnAutoBind    : Enabled                   
IGP Shortcut    : Enabled                   BGP Shortcut         : Enabled
IGP LFA         : Disabled                  IGP Rel Metric       : Disabled
BGPTransTun     : Enabled                   
Oper Metric     : 2000                      
Prop Adm Grp    : Disabled                  
PCE Report      : Disabled+                 
PCE Compute     : Disabled                  PCE Control          : Disabled
Path Profile    : None                      
 
Primary(a)      : path1                     Up Time              : 0d 00:00:40
Bandwidth       : 0 Mbps
 
*A:Dut-C>config>router>mpls>lsp# show router mpls lsp "N1.N2.3" detail 
 
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name    : N1.N2.3
LSP Type    : RegularLsp                       LSP Tunnel ID  : 132
From        : 192.168.0.1                      To             : 192.168.0.2
Adm State   : Up                               Oper State     : Up
LSP Up Time : 0d 00:01:07                      LSP Down Time  : 0d 00:00:00
Transitions : 1                                Path Changes   : 2
Retry Limit : 0                                Retry Timer    : 30 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : 1500
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Disabled                         Oper FR        : Disabled
CSPF        : Enabled                          ADSPEC         : Disabled
Metric      : 9                                Use TE metric  : Disabled
Load Balanc*: 100                              
Include Grps:                                  Exclude Grps   :  
None                                           None
Least Fill  : Disabled                         
 
Revert Timer: Disabled                         Next Revert In : N/A
Auto BW     : Disabled                         
LdpOverRsvp : Enabled                          VprnAutoBind   : Enabled
IGP Shortcut: Enabled                          BGP Shortcut   : Enabled
IGP LFA     : Disabled                         IGP Rel Metric : Disabled
BGPTransTun : Enabled                          
Oper Metric : 9                                
Prop Adm Grp: Disabled                         
 
Primary(a)  : path.N1.N2.3                     Up Time        : 0d 00:01:04
Bandwidth   : 0 Mbps                           
Secondary   : path.N1.N2.4                     Down Time      : 0d 00:01:00
Bandwidth   : 0 Mbps                           
===============================================================================
 
*A:SetupCLI# show router mpls lsp "lsp_1" path "500" detail
 
===============================================================================
MPLS LSP lsp_1 Path 500 (Detail)
===============================================================================
Legend :
    @ - Detour Available              # - Detour In Use
    b - Bandwidth Protected           n - Node Protected
    s - Soft Preemption
    S - Strict                        L - Loose
    A - ABR
===============================================================================
-------------------------------------------------------------------------------
LSP lsp_1 Path 500
-------------------------------------------------------------------------------
LSP Name         : lsp_1
Path LSP ID      : 38400
From             : 10.10.1.1            To                   : 10.10.1.2
Admin State      : Up                   Oper State           : Down
Path Name        : 500                  Path Type            : Primary
Path Admin       : Up                   Path Oper            : Down
Out Interface    : n/a                  Out Label            : n/a
Path Up Time     : 0d 00:00:00          Path Down Time       : 0d 00:00:43
Retry Limit      : 0                    Retry Timer          : 30 sec
Retry Attempt    : 2                    Next Retry In        : 19 sec
BFD Template     : None                 BFD Ping Interval    : 60
BFD Enable       : FALSE
 
Adspec           : Disabled             Oper Adspec          : N/A
CSPF             : Disabled             Oper CSPF            : N/A
Least Fill       : Disabled             Oper LeastFill       : N/A
FRR              : Disabled             Oper FRR             : N/A
Prop Adm Grp     : Disabled             Oper Prop AG         : N/A
Inter-area       : N/A
 
Neg MTU          : 0                    Oper MTU             : N/A
Bandwidth        : No Reservation       Oper Bw              : N/A
Hop Limit        : 255                  Oper HopLimit        : N/A
Record Route     : Record               Oper Rec Route       : N/A
Record Label     : No Record            Oper Rec Label       : N/A
Setup Priority   : 7                    Oper Setup Priority  : N/A
Hold Priority    : 7                    Oper Hold Priority   : N/A
Class Type       : 7                    Oper CT              : N/A
Backup CT        : 5
MainCT Retry     : 500
    Rem          :
MainCT Retry     : 500
    Limit        :
Include Grps     :                      Oper InclGrps        :
None                                           N/A
Exclude Grps     :                      Oper ExclGrps        :
None                                           N/A
 
Adaptive         : Enabled              Oper Metric          : N/A
Preference       : n/a
Path Trans       : 0                    CSPF Queries         : 0
Failure Code     : noResourcesAvailable
Failure Node     : 10.1.255.255
Explicit Hops    :
    No Hops Specified
Actual Hops      :
    No Hops Specified
Resignal Eligible: False
Last Resignal    : n/a                  CSPF Metric          : N/A
===============================================================================
 
*A:Dut-B# show router mpls lsp path detail tof1 
==============================================================================
MPLS LSP tof1 Path  (Detail)
==============================================================================
Legend : 
    @ - Detour Available              # - Detour In Use
    b - Bandwidth Protected           n - Node Protected
    s - Soft Preemption           
------------------------------------------------------------------------------
LSP tof1 Path 1
------------------------------------------------------------------------------
LSP Name    : tof1                               Path LSP ID : 4706            
From        : 10.20.1.2                          To          : 10.20.1.4       
Adm State   : Up                                 Oper State  : Up              
Path Name   : 1                                  Path Type   : Primary         
Path Admin  : Up                                 Path Oper   : Up              
OutInterface: 1/1/2:5                            Out Label   : 124809          
Path Up Time: 0d 00:01:16                        Path Dn Time: 0d 00:00:00     
Retry Limit : 0                                  Retry Timer : 20 sec          
RetryAttempt: 0                                  NextRetryIn : 0 sec           
SetupPriori*: 4                                  Hold Priori*: 4               
Bandwidth   : 1 Mbps                             Oper Bw     : 1 Mbps          
Hop Limit   : 255                                Class Type  : 5               
Record Route: Record                             Record Label: Record          
Oper MTU    : 1492                               Neg MTU     : 1492            
Adaptive    : Enabled                            Oper Metric : 1000            
Include Grps:                                    Exclude Grps:                 
None                                           None
Path Trans  : 2                                  CSPF Queries: 1               
Failure Code: noError                            Failure Node: n/a             
ExplicitHops:                                                                  
    10.20.1.4      
Actual Hops :                                                                  
    10.10.105.2(10.20.1.2) @ s                   Record Label    : N/A
 -> 10.10.105.4(10.20.1.4)                       Record Label    : 124809
ComputedHops:                                                                  
    10.10.105.2     -> 10.10.105.4    
ResigEligib*: False                                                            
LastResignal: n/a                                CSPF Metric : 1000            
In Prog MBB :
 MBB Type   : SoftPreemption                     NextRetryIn : 19 sec          
 Started At : 12/08/2008 22:21:11                RetryAttempt: 0               
 FailureCode: noError                            Failure Node: n/a             
==============================================================================
*A:Dut-B# 
*A:PE-4>config>router>mpls# show router mpls lsp "LSP-PE-2-PE-4" detail
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name    : LSP-PE-2-PE-4
LSP Type    : RegularLsp                       LSP Tunnel ID  : 4
LSP Index   : 4                                TTM Tunnel Id  : 4
From        : 192.0.2.104                      To             : 192.0.2.102
Adm State   : Up                               Oper State     : Up
LSP Up Time : 17d 02:16:53                     LSP Down Time  : 0d 00:00:00
Transitions : 3                                Path Changes   : 3
Retry Limit : 0                                Retry Timer    : 30 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : 8690
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Disabled                         Oper FR        : Disabled
CSPF        : Disabled                         ADSPEC         : Disabled
Metric      : N/A
Load Bal Wt : N/A                              ClassForwarding: Disabled
Include Grps:                                  Exclude Grps   :
None                                           None
Least Fill  : Disabled
BFD Template: None                             BFD Ping Intvl : 60
BFD Enable  : False
 
Revert Timer: Disabled                         Next Revert In : N/A
EntropyLbl  : Inherited
Auto BW     : Enabled                          AB OpState     : Down
Auto BW Min : 0 Mbps                           Auto BW Max    : 100000 Mbps
AB Up Thresh: 5 percent                        AB Down Thresh : 5 percent
AB Up BW    : 0 Mbps                           AB Down BW     : 0 Mbps
AB Curr BW  : 0 Mbps                           AB Samp Intv   : 0 Mins
AB Adj Mul  : 288+                             AB Samp Mul    : 1+
AB Adj Time : 0 Mins                           AB Samp Time   : 0 Mins
AB Adj Cnt  : 0                                AB Samp Cnt    : 0
AB Last Adj : n/a                              AB Next Adj    : 0 Mins
ABMaxAvgRt  : 0 Mbps                           AB Lst AvgRt   : 0 Mbps
AB Ovfl Lmt : 0                                AB Ovfl Cnt    : 0
ABOvflThres : 0 percent                        AB Ovfl BW     : 0 Mbps
AB UndflLmt : 0                                AB Undrfl Cnt  : 0
ABUndflThrs : 0 percent                        AB Undrfl BW   : 0 Mbps
ABMaxUndflBW: 0 Mbps
AB Adj Cause: none                             AB Monitor BW  : False
Be Weight   : 100 percent                      Af Weight      : 100 percent
L1 Weight   : 100 percent                      L2 Weight      : 100 percent
Nc Weight   : 100 percent                      Ef Weight      : 100 percent
H1 Weight   : 100 percent                      H2 Weight      : 100 percent
LdpOverRsvp : Enabled
VprnAutoBind: Enabled
IGP Shortcut: Enabled                          BGP Shortcut   : Enabled
IGP LFA     : Disabled                         IGP Rel Metric : Disabled
BGPTransTun : Enabled
Oper Metric : 1
Prop Adm Grp: Disabled
 
Primary(a)  : completely-loose-path            Up Time        : 17d 02:16:53
Bandwidth   : 0 Mbps
===============================================================================
 
*A:Reno 194# show router mpls lsp "From Reno to Atlanta RSVP-TE" path detail
===============================================================================
MPLS LSP From Reno to Atlanta RSVP-TE Path  (Detail)
===============================================================================
Legend :
    @ - Detour Available              # - Detour In Use
    b - Bandwidth Protected           n - Node Protected
    s - Soft Preemption
    S - Strict                        L - Loose
    A - ABR
===============================================================================
-------------------------------------------------------------------------------
LSP From Reno to Atlanta RSVP-TE Path primary_empty
-------------------------------------------------------------------------------
LSP Name         : From Reno to Atlanta RSVP-TE
Path LSP ID      : 14382
From             : 192.168.48.194       To                   : 192.168.48.224
Admin State      : Up                   Oper State           : Up
Path Name        : primary_empty        Path Type            : Primary
Path Admin       : Up                   Path Oper            : Up
Out Interface    : 1/1/1                Out Label            : 262094
Path Up Time     : 0d 00:00:22          Path Down Time       : 0d 00:00:00
Retry Limit      : 0                    Retry Timer          : 30 sec
Retry Attempt    : 0                    Next Retry In        : 0 sec
BFD Template     : None                 BFD Ping Interval    : 60
BFD Enable       : False
Adspec           : Disabled             Oper Adspec          : Disabled
CSPF             : Enabled              Oper CSPF            : Enabled
Least Fill       : Disabled             Oper LeastFill       : Disabled
FRR              : Enabled              Oper FRR             : Enabled
FRR NodeProtect  : Disabled             Oper FRR NP          : Disabled
FR Hop Limit     : 16                   Oper FRHopLimit      : 16
FR Prop Admin Gr*: Disabled             Oper FRPropAdmGrp    : Disabled
Propogate Adm Grp: Disabled             Oper Prop Adm Grp    : Disabled
Inter-area       : False
PCE Updt ID      : 0
PCE Report       : Enabled              Oper PCE Report      : Enabled
PCE Control      : Enabled              Oper PCE Control     : Enabled
PCE Compute      : Enabled
Neg MTU          : 1496                 Oper MTU             : 1496
Bandwidth        : 10 Mbps              Oper Bandwidth       : 10 Mbps
Hop Limit        : 255                  Oper HopLimit        : 255
Record Route     : Record               Oper Record Route    : Record
Record Label     : Record               Oper Record Label    : Record
Setup Priority   : 7                    Oper Setup Priority  : 7
Hold Priority    : 0                    Oper Hold Priority   : 0
Class Type       : 0                    Oper CT              : 0
Backup CT        : None
MainCT Retry     : n/a
    Rem          :
MainCT Retry     : 0
    Limit        :
Include Groups   :                      Oper Include Groups  :
None                                           None
Exclude Groups   :                      Oper Exclude Groups  :
top                                            top
Adaptive         : Enabled              Oper Metric          : 40
Preference       : n/a
Path Trans       : 7                    CSPF Queries         : 7172
Failure Code     : noError
Failure Node     : n/a
Explicit Hops    :
    No Hops Specified
Actual Hops      :
    10.202.5.194 (192.168.48.194) @              Record Label        : N/A
 -> 10.202.5.199 (192.168.48.199) @              Record Label        : 262094
 -> 192.168.48.185 (192.168.48.185)              Record Label        : 262111
 -> 10.0.5.185                                   Record Label        : 262111
 -> 192.168.48.223 (192.168.48.223)              Record Label        : 262121
 -> 10.0.7.223                                   Record Label        : 262121
 -> 192.168.48.224 (192.168.48.224)              Record Label        : 262116
 -> 10.101.4.224                                 Record Label        : 262116
Computed Hops    :
    10.202.5.199(S)
 -> 10.0.5.185(S)
 -> 10.0.7.223(S)
 -> 10.101.4.224(S)
Resignal Eligible: False
Last Resignal    : n/a                  CSPF Metric          : 40
-------------------------------------------------------------------------------
LSP From Reno to Atlanta RSVP-TE Path secondary_empty
-------------------------------------------------------------------------------
LSP Name         : From Reno to Atlanta RSVP-TE
Path LSP ID      : 14384
From             : 192.168.48.194       To                   : 192.168.48.224
Admin State      : Up                   Oper State           : Up
Path Name        : secondary_empty      Path Type            : Standby
Path Admin       : Up                   Path Oper            : Up
Out Interface    : 1/

CBF Info —To see CBF information of the LSP:

*A:Dut-B>show>router# show router mpls lsp "11-4" detail 
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
Legend : 
    + - Inherited
===============================================================================
-------------------------------------------------------------------------------
Type : Originating 
-------------------------------------------------------------------------------
LSP Name        : 11-4
LSP Type        : RegularLsp                LSP Tunnel ID        : 83
LSP Index       : 83                        TTM Tunnel Id        : 83
From            : 10.20.1.2                 To                   : 10.20.1.5
Adm State       : Up                        Oper State           : Up
LSP Up Time     : 0d 00:15:33               LSP Down Time        : 0d 00:00:00
Transitions     : 1                         Path Changes         : 1
Retry Limit     : 0                         Retry Timer          : 30 sec
Signaling       : RSVP                      Resv. Style          : SE
Hop Limit       : 255                       Negotiated MTU       : 1500
Adaptive        : Enabled                   ClassType            : 0
FastReroute     : Disabled                  Oper FR              : Disabled
Egress Stats    : Enabled                   Egress Oper State    : N/A
CSPF            : Enabled                   ADSPEC               : Disabled
Metric          : N/A                       Use TE metric        : Disabled
Load Bal Wt     : N/A                       ClassForwarding      : Enabled
CBF FC          : None                      CBF Default LSP      : No
CBF Fwding Plcy : policy1
CBF Fwding Set  : 4                         
Include Grps    :                           Exclude Grps         :  
None                                           None
Least Fill      : Disabled                  
BFD Template    : None                      BFD Ping Intvl       : 60
BFD Enable      : False                     BFD Failure-action   : None
Revert Timer    : Disabled                  Next Revert In       : N/A
Entropy Label   : Enabled+                  Oper Entropy Label   : Enabled
Negotiated EL   : Disabled                  
Auto BW         : Disabled                  
LdpOverRsvp     : Enabled                   
VprnAutoBind    : Enabled                   
IGP Shortcut    : Enabled                   BGP Shortcut         : Enabled
IGP LFA         : Disabled                  IGP Rel Metric       : Disabled
BGPTransTun     : Enabled                   
Oper Metric     : 2000                      
Prop Adm Grp    : Disabled                  
PCE Report      : Disabled+                 
PCE Compute     : Disabled                  PCE Control          : Disabled
Path Profile    : None                      
 
Primary(a)      : 1                         Up Time              : 0d 00:15:33
Bandwidth       : 0 Mbps                    
===============================================================================

lsp-egress-stats

Syntax 
lsp-egress-stats
lsp-egress-stats lsp-name
Context 
show>router>mpls
Description 

This command displays MPLS LSP egress statistics information.

Parameters 
lsp-name—
Specifies the LSP name up to 64 character in length.
Output 

The following output is an example of MPLS LSP egress statistics fields.

Sample Output
*A:Dut-C>config>router>mpls>lsp$ show router mpls lsp-egress-stats lsp "1" 
=================================================================
MPLS LSP Egress Statistics
=================================================================
-----------------------------------------------------------------
LSP Name      : 1
-----------------------------------------------------------------
Collect Stats : Enabled                 Accting Plcy. : Default
Adm State     : Up                      PSB Match     : True
FC BE
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC AF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC EF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC NC
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
=================================================================
 
 
*A:Dut-C# show router mpls lsp-egress-stats lsp "ipmsi-1-73728" 
 
=================================================================
MPLS LSP Egress Statistics
=================================================================
-----------------------------------------------------------------
LSP Name      : ipmsi-1-73728
-----------------------------------------------------------------
Collect Stats : Enabled                 Accting Plcy. : Default
Adm State     : Up                      PSB Match     : True
FC BE
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC AF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC EF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC NC
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
=================================================================

lsp-ingress-stats

Syntax 
lsp-ingress-stats
lsp-ingress-stats ip-address lsp lsp-name
Context 
show>router>mpls
Description 

This command displays MPLS LSP ingress statistics information.

Parameters 
lsp-name—
Specifies the LSP name up to 64 character in length.
Output 

The following output is an example of MPLS LSP ingress statistics fields.

Sample Output
*A:Dut-A# show router mpls lsp-ingress-stats lsp "1" sender 10.20.1.3 
=================================================================
MPLS LSP Ingress Statistics
=================================================================
-----------------------------------------------------------------
LSP Name      : 1
Sender        : 10.20.1.3
-----------------------------------------------------------------
Collect Stats : Disabled                Accting Plcy. : None
Adm State     : Up                      PSB Match     : True
FC BE
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC AF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC EF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC NC
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
=================================================================
 
*A:Dut-A# show router mpls lsp-ingress-stats lsp "ipmsi-1-73728" sender 10.20.1.3 
=======================================================================
MPLS LSP Ingress Statistics
=======================================================================
-----------------------------------------------------------------------
LSP Name      : ipmsi-1-73728
Sender        : 10.20.1.3                      
-----------------------------------------------------------------------
Collect Stats : Disabled                Accting Plcy. : None
Adm State     : Up                      PSB Match     : True
FC BE
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC AF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC EF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC NC
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
=======================================================================
 
 
*A:Dut-A>config>router>mpls>ingr-stats# show router mpls lsp-ingress-stats 
type p2mp active template-match 
=======================================================================
MPLS LSP Ingress Statistics
=======================================================================
-----------------------------------------------------------------------
LSP Name      : ipmsi-1-73728
Sender        : 10.20.1.3
-----------------------------------------------------------------------
Collect Stats : Disabled                Accting Plcy. : None
Adm State     : Up                      PSB Match     : True
FC BE
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC AF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC L1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H2
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC EF
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC H1
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
FC NC
InProf Pkts   : 0                       OutProf Pkts  : 0
InProf Octets : 0                       OutProf Octets: 0
-----------------------------------------------------------------------
LSP Statistics : 1

lsp-template

Syntax 
lsp-template [lsp-template-name] [detail]
Context 
show>router>mpls
Description 

This command displays MPLS LSP template information.

Output 

The following output is an example of MPLS LSP template detail fields.

Sample Output
*A:Dut-C# show router mpls lsp-template detail 
========================================================================
MPLS LSP Templates (Detail)
========================================================================
------------------------------------------------------------------------
LSP Template : ipmsi 
------------------------------------------------------------------------
Type               : P2MP               Admin State        : Up
Default Path       : path_ipmsi         Adaptive           : Enabled
Bandwidth          : 0 Mbps             Hop Limit          : 255
CSPF               : Enabled            Use TE metric      : Disabled
Include Groups     :                    Exclude Groups     :  
None                                    None
FastReroute        : Enabled            
FR Method          : Facility           FR Hop Limit       : 16
Record Route       : Record             Record Label       : Record
Retry Limit        : 0                  Retry Timer        : 30 sec
LSP Count          : 3                  Ref Count          : 3
========================================================================

lsp-egress-stats

Syntax 
lsp-egress-stats [active]
lsp-egress-stats lsp lsp-name
Context 
show>router>mpls>mpls-tp
Description 

This command displays MPLS-TP LSP egress statistics information.

Parameters 
active
Displays statistics for all active LSPs.
lsp-name—
Displays statistics for the specified LSP name, up to 64 characters.
Output 

Table 22 describes MPLS LSP egress statistics output fields and the following output is an example of MPLS-TP LSP egress statistics fields.

Sample Output
*A:cses-V23# show router mpls mpls-tp lsp-egress-stats
===============================================================================
MPLS TP-LSP Egress Statistics
===============================================================================
No Matching Entries Found
===============================================================================
Table 22:  LSP Egress Stats Output Fields 

Label

Description 

ABC

Specifies the.

DEF

Specifies

XYZ

Specifies the sender IP address.

lsp-ingress-stats

Syntax 
lsp-ingress-stats [active]
lsp-ingress-stats lsp lsp-name
Context 
show>router>mpls>mpls-tp
Description 

This command displays MPLS-TP LSP ingress statistics information.

Parameters 
active
Displays statistics for all active LSPs.
lsp-name—
Displays statistics for the specified LSP name, up to 64 characters.
Output 

Table 22 describes MPLS LSP ingress statistics output fields and the following output is an example of MPLS-TP LSP ingress statistics fields.

Sample Output
*A:cses-V23# show router mpls mpls-tp lsp-ingress-stats
===============================================================================
MPLS TP-LSP Ingress Statistics
===============================================================================
No Matching Entries Found
===============================================================================
Table 23:  LSP Ingress Stats Output Fields 

Label

Description 

ABC

Specifies the.

DEF

Specifies

XYZ

Specifies the sender IP address.

oam-template

Syntax 
oam-template
Context 
show>router>mpls>mpls-tp
Description 

This command displays MPLS-TP OAM template information.

Output 

The following output is an example of MPLS OAM template detail fields.

Sample Output
*A:mlstp-dutA# show router mpls mpls-tp oam-template
 
===============================================================================
MPLS-TP OAM Templates
===============================================================================
Template Name : privatebed-oam-template Router ID     : 1
BFD Template  : privatebed-bfd-template Hold-Down Time: 0 centiseconds
                                        Hold-Up Time  : 20 deciseconds
===============================================================================

protection-template

Syntax 
protection-template
Context 
show>router>mpls>mpls-tp
Description 

This command displays MPLS-TP protection template information.

Output 

The following output is an example of MPLS protection template fields.

Sample Output
*A:mlstp-dutA# show router mpls mpls-tp protection-template
===============================================================================
MPLS-TP Protection Templates
===============================================================================
Template Name  : privatebed-protection-template  Router ID      : 1
Protection Mode: one2one                         Direction      : bidirectional
Revertive      : revertive                       Wait-to-Restore: 300sec
Rapid-PSC-Timer: 10ms                            Slow-PSC-Timer : 5sec
===============================================================================

status

Syntax 
status
Context 
show>router>mpls
Description 

This command displays MPLS operation information.

Output 

MPLS Status Output

Table 24 describes MPLS status output fields.

Table 24:  MPLS Status Output Fields 

Label

Description

Admin Status

Down — MPLS is administratively disabled.

Up — MPLS is administratively enabled.

Oper Status

Down — MPLS is operationally down.

Up — MPLS is operationally up.

LSP Counts

Static LSPs — Displays the count of static LSPs that originate, transit, and terminate on or through the router.

Dynamic LSPs — Displays the count of dynamic LSPs that originate, transit, and terminate on or through the router.

Detour LSPs — Displays the count of detour LSPs that originate, transit, and terminate on or through the router.

FR Object

Enabled — Specifies that Fast reroute object is signaled for the LSP.

Disabled — Specifies that Fast reroute object is not signaled for the LSP.

Resignal Timer

Enabled — Specifies that the resignal timer is enabled for the LSP.

Disabled — Specifies that the resignal timer is disabled for the LSP.

Hold Timer

Displays the amount of time that the ingress node holds before programming its data plane and declaring the LSP up to the service module.

Auxiliary Stats

Indicates whether auxiliary statistics are disabled or enabled. If enabled, it also indicates the configured labeled traffic type to count.

Sample Output
*A:Dut-A>config>service# show router mpls status 
===============================================================================
MPLS Status
===============================================================================
Admin Status              : Up          Oper Status               : Up
Oper Down Reason          : n/a
FRR Object                : Enabled     Resignal Timer            : Disabled
Hold Timer                : 1 seconds   Next Resignal             : N/A
Srlg Frr                  : Disabled    Srlg Frr Strict           : Disabled
Admin Group Frr           : Disabled    
Dynamic Bypass            : Enabled     User Srlg Database        : Disabled
BypassResignalTimer       : Disabled    BypassNextResignal        : N/A
LeastFill Min Thd         : 5 percent   LeastFill Reopti Thd      : 10 percent
Local TTL Prop            : Enabled     Transit TTL Prop          : Enabled
AB Sample Multiplier      : 1           AB Adjust Multiplier      : 288
Exp Backoff Retry         : Disabled    CSPF On Loose Hop         : Disabled
Lsp Init RetryTimeout     : 30 seconds  MBB Pref Current Hops     : Disabled
Logger Event Bundling     : Disabled    
RetryIgpOverload          : Disabled    
 
P2mp Resignal Timer       : Disabled    P2mp Next Resignal        : N/A
Sec FastRetryTimer        : Disabled    Static LSP FR Timer       : 30 seconds
P2P Max Bypass Association: 1000        
P2PActPathFastRetry       : Disabled    P2MP S2L Fast Retry       : Disabled
In Maintenance Mode       : No          
MplsTp                    : Disabled    
Next Available Lsp Index  : 1           
Entropy Label RSVP-TE     : Enabled     Entropy Label SR-TE       : Enabled
PCE Report RSVP-TE        : Disabled    PCE Report SR-TE          : Disabled
Auxiliary Stats           : Disabled
 
===============================================================================
MPLS LSP Count
===============================================================================
                          Originate         Transit           Terminate
-------------------------------------------------------------------------------
Static LSPs               0                 0                 0
Dynamic LSPs              0                 0                 0
Detour LSPs               0                 0                 0
P2MP S2Ls                 0                 0                 0
MPLS-TP LSPs              0                 0                 0
Mesh-P2P LSPs             0                 N/A               N/A
One Hop-P2P LSPs          0                 N/A               N/A
SR-TE LSPs                1                 N/A               N/A
Mesh-P2P SR-TE LSPs       5                 N/A               N/A
One Hop-P2P SR-TE LSPs    2                 N/A               N/A
===============================================================================

transit-path

Syntax 
transit-path [path-name] [detail]
Context 
show>router>mpls>mpls-tp
Description 

This command displays MPLS-TP tunnel information.

Parameters 
path-name—
Specifies the path name, up to 32 characters max.
Output 

The following output is an example of MPLS OAM transit path fields.

Sample Output
A:mplstp-dutC# show router mpls mpls-tp transit-path
<path-name>
 "tp-32"   "tp-33"   "tp-34"   "tp-35"   "tp-36"   "tp-37"   "tp-38"   "tp-39"
 "tp-40"   "tp-41"
detail
 
A:mplstp-dutC# show router mpls mpls-tp transit-path "tp-32"
===============================================================================
MPLS-TP Transit tp-32 Path Information
===============================================================================
Path Name     : tp-32
Admin State   : Up                               Oper State    : Up
 
------------------------------------------------------------------
Path        NextHop           InLabel   OutLabel  Out I/F
------------------------------------------------------------------
FP                            2080      2081      CtoB_1
RP                            2081      2080      CtoA_1
===============================================================================
A:mplstp-dutC# show router mpls mpls-tp transit-path "tp-32" detail
===============================================================================
MPLS-TP Transit tp-32 Path Information (Detail)
===============================================================================
Path Name     : tp-32
Admin State   : Up                               Oper State    : Up
-------------------------------------------------------------------------------
Path ID configuration
Src Global ID : 42                               Dst Global ID : 42
Src Node ID   : 0.0.3.234                        Dst Node ID   : 0.0.3.233
LSP Number    : 2                                Dst Tunnel Num: 32
 
Forward Path configuration
In Label      : 2080                             Out Label     : 2081
Out Interface : CtoB_1                           Next Hop Addr : n/a
 
Reverse Path configuration
In Label      : 2081                             Out Label     : 2080
Out Interface : CtoA_1                           Next Hop Addr : n/a
===============================================================================
A:mplstp-dutC#

p2mp-info

Syntax 
p2mp-info [type {originate | transit | terminate}] [s2l-endpoint ip-address]
Context 
show>router>mpls
Description 

This command displays P2MP cross-connect information.

Parameters 
type—
Specifies the P2MP type.
Values—
originate — Specifies to display the static LSPs that originate at this virtual router. transit — Specifies to display the static LSPs that transit through this virtual router. terminate — Specifies to display the static LSPs that terminate at this virtual router.

 

Output 

The following output is an example of MPLS p2mp information fields.

Sample Output
*A:Dut-C# show router mpls p2mp-info 
========================================================================
MPLS P2MP Cross Connect Information
========================================================================
------------------------------------------------------------------------
S2L ipmsi-4000-73729::path_ipmsi
------------------------------------------------------------------------
Source IP Address    : 10.20.1.1             Tunnel ID     : 61441
P2MP ID              : 4000                  Lsp ID        : 29696
S2L Name             : ipmsi-4000-73729::pa* To            : 10.20.1.3
In Interface         : 1/1/1                 In Label      : 262129
Num. of S2ls         : 1                     
------------------------------------------------------------------------
S2L ipmsi-65535-73730::path_ipmsi
------------------------------------------------------------------------
Source IP Address    : 10.20.1.1             Tunnel ID     : 61442
P2MP ID              : 65535                 Lsp ID        : 30208
S2L Name             : ipmsi-65535-73730::p* To            : 10.20.1.3
In Interface         : 1/1/1                 In Label      : 262128
Num. of S2ls         : 1                     
------------------------------------------------------------------------
S2L ipmsi-1001-73728::path_ipmsi
------------------------------------------------------------------------
Source IP Address    : 10.20.1.1             Tunnel ID     : 61440
P2MP ID              : 1001                  Lsp ID        : 35840
S2L Name             : ipmsi-1001-73728::pa* To            : 10.20.1.3
In Interface         : 1/1/1                 In Label      : 262127
Num. of S2ls         : 1                     
------------------------------------------------------------------------
S2L ipmsi-1001-73732::path_ipmsi
-----------------------------------------------------------------------
Source IP Address    : 10.20.1.2             Tunnel ID     : 64944
P2MP ID              : 1001                  Lsp ID        : 34816
S2L Name             : ipmsi-1001-73732::pa* To            : 10.20.1.3
In Interface         : 1/1/2                 In Label      : 262114
Num. of S2ls         : 1                     
------------------------------------------------------------------------
S2L ipmsi-4000-73729::path_ipmsi
------------------------------------------------------------------------
Source IP Address    : 10.20.1.3             Tunnel ID     : 61441
P2MP ID              : 4000                  Lsp ID        : 16384
S2L Name             : ipmsi-4000-73729::pa* To            : 10.20.1.1
Out Interface        : 1/1/1                 Out Label     : 262131
Num. of S2ls         : 1                     
------------------------------------------------------------------------
S2L ipmsi-4000-73729::path_ipmsi      
------------------------------------------------------------------------
Source IP Address    : 10.20.1.3             Tunnel ID     : 61441
P2MP ID              : 4000                  Lsp ID        : 16384
S2L Name             : ipmsi-4000-73729::pa* To            : 10.20.1.4
Out Interface        : 2/1/1                 Out Label     : 262121
Num. of S2ls         : 1                     
------------------------------------------------------------------------
S2L ipmsi-1001-73728::path_ipmsi
------------------------------------------------------------------------
Source IP Address    : 10.20.1.3             Tunnel ID     : 61440
P2MP ID              : 1001                  Lsp ID        : 22016
S2L Name             : ipmsi-1001-73728::pa* To            : 10.20.1.1
Out Interface        : 1/1/1                 Out Label     : 262129
Num. of S2ls         : 1                     
------------------------------------------------------------------------
S2L ipmsi-1001-73728::path_ipmsi
------------------------------------------------------------------------
Source IP Address    : 10.20.1.3             Tunnel ID     : 61440
P2MP ID              : 1001                  Lsp ID        : 22016
S2L Name             : ipmsi-1001-73728::pa* To            : 10.20.1.2
Out Interface        : 1/1/2                 Out Label     : 262115
Num. of S2ls         : 1                     
------------------------------------------------------------------------
S2L ipmsi-1001-73728::path_ipmsi
------------------------------------------------------------------------
Source IP Address    : 10.20.1.3             Tunnel ID     : 61440
P2MP ID              : 1001                  Lsp ID        : 22016
S2L Name             : ipmsi-1001-73728::pa* To            : 10.20.1.4
Out Interface        : 2/1/1                 Out Label     : 262108
Num. of S2ls         : 2                     
------------------------------------------------------------------------
S2L ipmsi-1001-73728::path_ipmsi
------------------------------------------------------------------------
Source IP Address    : 10.20.1.3             Tunnel ID     : 61440
P2MP ID              : 1001                  Lsp ID        : 22016
S2L Name             : ipmsi-1001-73728::pa* To            : 10.20.1.5
Out Interface        : 2/1/1                 Out Label     : 262108
Num. of S2ls         : 2                     
------------------------------------------------------------------------
S2L ipmsi-65535-73730::path_ipmsi
------------------------------------------------------------------------
Source IP Address    : 10.20.1.3             Tunnel ID     : 61442
P2MP ID              : 65535                 Lsp ID        : 46592
S2L Name             : ipmsi-65535-73730::p* To            : 10.20.1.1
Out Interface        : 1/1/1                 Out Label     : 262130
Num. of S2ls         : 1                     
------------------------------------------------------------------------
S2L ipmsi-65535-73730::path_ipmsi
------------------------------------------------------------------------
Source IP Address    : 10.20.1.3             Tunnel ID     : 61442
P2MP ID              : 65535                 Lsp ID        : 46592
S2L Name             : ipmsi-65535-73730::p* To            : 10.20.1.4
Out Interface        : 2/1/1                 Out Label     : 262109
Num. of S2ls         : 1                     
------------------------------------------------------------------------
P2MP Cross-connect instances : 12

p2mp-lsp

Syntax 
p2mp-lsp [lsp-name] [detail]
p2mp-lsp [lsp-name] p2mp-instance [p2mp-instance-name] [mbb]
p2mp-lsp [lsp-name] p2mp-instance [p2mp-instance-name] s2l [s2l-name [to s2l-to-address]] [status {up | down}] [detail]
p2mp-lsp [lsp-name] p2mp-instance [p2mp-instance-name] s2l [s2l-name [to s2l-to-address]] mbb
Context 
show>router>mpls
Description 

This command displays MPLS P2MP LSP information.

Parameters 
lsp-name—
Specifies the LSP name, up to 64 characters in length, used in the path.
p2mp-instance[p2mp-instance-name
Specifies the administrative name for the P2MP instance which must be unique within a virtual router instance.
mbb—
Specifies to display make-before-break (MBB) information.
s2l—
Specifies the source-to-leaf (S2L) name.
to s2l-to-address
Indicates the IP address of the destination address of the S2L sub-LSP.
status—
Displays the status of the p2mp LSP.
Values—
up — Displays the total time that this S2l has been operational. down — Displays the total time that this S2l has not been operational.

 

Output 

The following output is an example of MPLS p2mp lsp fields.

Sample Output
*A:Dut-C# show router mpls p2mp-lsp  
  - p2mp-lsp [<lsp-name>] [detail]
  - p2mp-lsp [<lsp-name>] p2mp-instance [<p2mp-instance-name>] [mbb]
  - p2mp-lsp [<lsp-name>] p2mp-instance [<p2mp-instance-name>] s2l [<s2l-name>
    [to <s2l-to-address>]][status {up | down}] [detail]
  - p2mp-lsp [<lsp-name>] p2mp-instance [<p2mp-instance-name>] s2l [<s2l-name>
    [to <s2l-to-address>]] <mbb>
  - p2mp-lsp using-template [lsp-template <template-name>] [detail]
 
<lsp-name>           : [64 chars max] - accepts * as wildcard char
<p2mp-instance>      : keyword
<p2mp-instance-name> : [max 32 chars]
<s2l>                : keyword
<s2l-name>           : [max 32 chars]
<up | down>            : keywords
<detail>             : keyword
<mbb>                : keyword
<s2l-to-address>     : [a.b.c.d]
<using-template>     : keyword
<lsp-template>       : [32 chars max]
 
 
 
*A:Dut-C# show router mpls p2mp-lsp 
========================================================================
MPLS P2MP LSPs (Originating)
========================================================================
LSP Name                                                            Adm   Opr
------------------------------------------------------------------------
ipmsi-1001-73728                                                    Up    Up
ipmsi-4000-73729                                                    Up    Up
ipmsi-65535-73730                                                   Up    Up
------------------------------------------------------------------------
LSPs : 3
========================================================================
*A:Dut-C# show router mpls p2mp-lsp detail 
========================================================================
MPLS P2MP LSPs (Originating) (Detail)
========================================================================
------------------------------------------------------------------------
Type : Originating 
------------------------------------------------------------------------
LSP Name    : ipmsi-1001-73728
LSP Type    : P2mpAutoLsp                      LSP Tunnel ID  : 61440
From        : 10.20.1.3                        
Adm State   : Up                               Oper State     : Up
LSP Up Time : 6d 21:08:37                      LSP Down Time  : 0d 00:00:00
Transitions : 1                                Path Changes   : 1
Retry Limit : 0                                Retry Timer    : 30 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : n/a
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Enabled                          Oper FR        : Enabled
FR Method   : Facility                         FR Hop Limit   : 16
FR Bandwidth: 0 Mbps                           FR Node Protect: Disabled
FR Object   : Enabled                          
CSPF        : Enabled                          ADSPEC         : Disabled
Metric      : Disabled                         Use TE metric  : Disabled
Include Grps:                                  Exclude Grps   :  
None                                           None
Least Fill  : Disabled                         
 
Auto BW     : Disabled                         
LdpOverRsvp : Disabled                         VprnAutoBind   : Disabled
IGP Shortcut: Disabled                         BGP Shortcut   : Disabled
BGPTransTun : Disabled                         
Oper Metric : Disabled                         
Prop Adm Grp: Disabled                         CSPFFirstLoose : Disabled
P2MPInstance: 1001                             P2MP-Inst-type : Primary
S2L Cfg Cou*: 4                                S2L Oper Count*: 4
S2l-Name    : path_ipmsi                       To             : 10.20.1.1
S2l-Name    : path_ipmsi                       To             : 10.20.1.2
S2l-Name    : path_ipmsi                       To             : 10.20.1.4
S2l-Name    : path_ipmsi                       To             : 10.20.1.5
------------------------------------------------------------------------
Type : Originating 
------------------------------------------------------------------------
LSP Name    : ipmsi-4000-73729
LSP Type    : P2mpAutoLsp                      LSP Tunnel ID  : 61441
From        : 10.20.1.3                        
Adm State   : Up                               Oper State     : Up
LSP Up Time : 6d 21:08:38                      LSP Down Time  : 0d 00:00:00
Transitions : 1                                Path Changes   : 1
Retry Limit : 0                                Retry Timer    : 30 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : n/a
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Enabled                          Oper FR        : Enabled
FR Method   : Facility                         FR Hop Limit   : 16
FR Bandwidth: 0 Mbps                           FR Node Protect: Disabled
FR Object   : Enabled                          
CSPF        : Enabled                          ADSPEC         : Disabled
Metric      : Disabled                         Use TE metric  : Disabled
Include Grps:                                  Exclude Grps   :  
None                                           None
Least Fill  : Disabled                         
 
Auto BW     : Disabled                         
LdpOverRsvp : Disabled                         VprnAutoBind   : Disabled
IGP Shortcut: Disabled                         BGP Shortcut   : Disabled
BGPTransTun : Disabled                         
Oper Metric : Disabled                         
Prop Adm Grp: Disabled                         CSPFFirstLoose : Disabled
 
P2MPInstance: 4000                             P2MP-Inst-type : Primary
S2L Cfg Cou*: 2                                S2L Oper Count*: 2
S2l-Name    : path_ipmsi                       To             : 10.20.1.1
S2l-Name    : path_ipmsi                       To             : 10.20.1.4
------------------------------------------------------------------------
Type : Originating 
------------------------------------------------------------------------
LSP Name    : ipmsi-65535-73730
LSP Type    : P2mpAutoLsp                      LSP Tunnel ID  : 61442
From        : 10.20.1.3                        
Adm State   : Up                               Oper State     : Up
LSP Up Time : 6d 21:08:39                      LSP Down Time  : 0d 00:00:00
Transitions : 1                                Path Changes   : 1
Retry Limit : 0                                Retry Timer    : 30 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : n/a
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Enabled                          Oper FR        : Enabled
FR Method   : Facility                         FR Hop Limit   : 16
FR Bandwidth: 0 Mbps                           FR Node Protect: Disabled
FR Object   : Enabled                          
CSPF        : Enabled                          ADSPEC         : Disabled
Metric      : Disabled                         Use TE metric  : Disabled
Include Grps:                                  Exclude Grps   :  
None                                           None
Least Fill  : Disabled                         
 
Auto BW     : Disabled                         
LdpOverRsvp : Disabled                         VprnAutoBind   : Disabled
IGP Shortcut: Disabled                         BGP Shortcut   : Disabled
BGPTransTun : Disabled                         
Oper Metric : Disabled                         
Prop Adm Grp: Disabled                         CSPFFirstLoose : Disabled
 
P2MPInstance: 65535                            P2MP-Inst-type : Primary
S2L Cfg Cou*: 2                                S2L Oper Count*: 2
S2l-Name    : path_ipmsi                       To             : 10.20.1.1
S2l-Name    : path_ipmsi                       To             : 10.20.1.4
========================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-C#
 
 
*A:sim1>config>router>mpls>lsp$ show router mpls p2mp-lsp p2mp-instance s2l detail
========================================================================
MPLS LSP  S2L  (Detail)
========================================================================
Legend :
    @ - Detour Available                          # - Detour In Use
    b - Bandwidth Protected                       n - Node Protected
    S - Strict                                    L - Loose
    s - Soft Preemption
========================================================================
------------------------------------------------------------------------
LSP 1 S2L 1
------------------------------------------------------------------------
LSP Name    : 1                                  S2l LSP ID  : 26624
P2MP ID     : 0                                  S2l Grp Id  : 0
Adm State   : Up                                 Oper State  : Down
S2l State:  : Inactive                                       :
S2L Name    : 1                                  To          : 10.20.1.3
S2l Admin   : Up                                 S2l Oper    : Down
OutInterface: n/a                                Out Label   : n/a
S2L Up Time : 0d 00:00:00                        S2L Dn Time : 0d 00:00:01
RetryAttempt: 0                                  NextRetryIn : 9 sec (Fast)
S2L Trans   : 8                                  CSPF Queries: 4
Failure Code: noError                            Failure Node: n/a
ExplicitHops:
    10.20.1.2(S)
Actual Hops :
    No Hops Specified
ComputedHops:
    No Hops Specified
LastResignal: n/a
========================================================================
 
 
show router mpls p2mp-lsp p2mp-instance s2l detail
========================================================================
------------------------------------------------------------------------
LSP 2 S2L 2
------------------------------------------------------------------------
LSP Name    : 2                                  S2l LSP ID  : 52230
P2MP ID     : 0                                  S2l Grp Id  : 2
Adm State   : Up                                 Oper State  : Up
S2l State:  : Active                                         :
S2L Name    : 2                                  To          : 10.20.1.3
S2l Admin   : Up                                 S2l Oper    : Up
OutInterface: 1/1/1                              Out Label   : 131071
S2L Up Time : 0d 00:04:43                        S2L Dn Time : 0d 00:00:00
RetryAttempt: 0                                  NextRetryIn : 0 sec
S2L Trans   : 5                                  CSPF Queries: 21
Failure Code: tunnelLocallyRepaired              Failure Node: 10.20.1.2
ExplicitHops:
    10.20.1.2(S)
Actual Hops :
    10.10.1.1(10.20.1.1)                         Record Label    : N/A
 -> 10.10.1.2(10.20.1.2) @ #                     Record Label    : 131071
 -> 10.10.6.3(10.20.1.3)                         Record Label    : 131068
ComputedHops:
    10.10.1.1(S)       -> 10.10.1.2(S)       -> 10.10.5.3(S)
LastResignal: n/a
In Prog MBB :
 MBB Type   : GlobalRevert                       NextRetryIn : n/a
 Timeout In : 23 sec                                      
 Started At : 06/29/2011 11:06:09                RetryAttempt: 7
 FailureCode: noError                            Failure Node: n/a
========================================================================
 
 
*A:Dut-C>config>router>mpls>lsp$ /show router mpls lsp path detail 
========================================================================
MPLS LSP  Path  (Detail)
========================================================================
Legend : 
    @ - Detour Available              # - Detour In Use
    b - Bandwidth Protected           n - Node Protected
    s - Soft Preemption           
    S - Strict                        L - Loose
========================================================================
------------------------------------------------------------------------
LSP 1 Path 1
------------------------------------------------------------------------
LSP Name    : 1                                  Path LSP ID : 56320
From        : 10.20.1.3                          To          : 10.10.1.1
Adm State   : Up                                 Oper State  : Up
Path Name   : 1                                  Path Type   : Primary
Path Admin  : Up                                 Path Oper   : Up
OutInterface: 1/1/1                              Out Label   : 131071
Path Up Time: 0d 00:03:09                        Path Dn Time: 0d 00:00:00
Retry Limit : 0                                  Retry Timer : 30 sec
RetryAttempt: 0                                  NextRetryIn : 0 sec 
SetupPriori*: 7                                  Hold Priori*: 0
Preference  : n/a                                
Bandwidth   : No Reservation                     Oper Bw     : 0 Mbps
Hop Limit   : 255                                Class Type  : 0
Backup CT   : None                               
MainCT Retry: n/a                                MainCT Retry: 0
    Rem     :                                        Limit   :  
Oper CT     : 0                                  
Record Route: Record                             Record Label: Record
Oper MTU    : 1496                               Neg MTU     : 1496
Adaptive    : Enabled                            Oper Metric : 1000
Include Grps:                                    Exclude Grps:  
None                                           None
Path Trans  : 1                                  CSPF Queries: 3
Failure Code: badNode                            Failure Node: 10.20.1.3
 
Oper Values :                                    
Setup Prior*: 7                                  Hold Priori*: 0
Record Route: Record                             Record Label: Record
Hop Limit   : 255                                
Adspec      : Disabled                           
CSPF        : Enabled                            CSPFToFirst*: Disabled
Least Fill  : Disabled                           FR Node Pro*: Disabled
Prop Adm Grp: Disabled                           
Include Grps:                                    Exclude Grps:  
None                                           None
                                      
ExplicitHops:                                    
    No Hops Specified                 
Actual Hops :                                    
    10.10.2.3(10.20.1.3) @ #                     Record Label    : N/A
 -> 10.10.1.1(10.20.1.1)                         Record Label    : 131071
ComputedHops:                                    
    10.10.2.3(S)       -> 10.10.2.1(S)      
ResigEligib*: False                              
LastResignal: n/a                                CSPF Metric : 1000
In Prog MBB :                         
 MBB Type   : GlobalRevert                       NextRetryIn : 0 sec
 Timeout In : 22 sec                             
 Started At : 08/26/2011 23:59:29                RetryAttempt: 2
 FailureCode: noError                            Failure Node: n/a
 Signaled BW: 0 Mbps                             
========================================================================
* indicates that the corresponding row element may have been truncated.
 
 
show router mpls p2mp-lsp p2mp-instance s2l detail
------------------------------------------------------------------------
LSP 2 S2L 2
------------------------------------------------------------------------
LSP Name    : 2                                  S2l LSP ID  : 52230
P2MP ID     : 0                                  S2l Grp Id  : 4
Adm State   : Up                                 Oper State  : Down
S2l State:  : Inactive                                       :
S2L Name    : 2                                  To          : 10.20.1.3
S2l Admin   : Up                                 S2l Oper    : In Progress
OutInterface: n/a                                Out Label   : n/a
S2L Up Time : 0d 00:00:00                        S2L Dn Time : 0d 00:00:20
RetryAttempt: 1                                  NextRetryIn : n/a
Timeout In  : 21 sec
S2L Trans   : 6                                  CSPF Queries: 27
Failure Code: noError                            Failure Node: n/a
ExplicitHops:
    10.20.1.2(S)
Actual Hops :
    No Hops Specified
LastResignal: n/a
 
 
*A:Dut-C# show router mpls p2mp-lsp 
=============================================================================
MPLS P2MP LSPs (Originating)
=============================================================================
LSP Name                                                            Adm   Opr
------------------------------------------------------------------------
ipmsi-1001-73728                                                    Up    Up
ipmsi-4000-73729                                                    Up    Up
ipmsi-65535-73730                                                   Up    Up
------------------------------------------------------------------------
LSPs : 3
========================================================================
 
 
*A:Dut-C# show router mpls p2mp-lsp detail 
========================================================================
MPLS P2MP LSPs (Originating) (Detail)
========================================================================
------------------------------------------------------------------------
Type : Originating 
------------------------------------------------------------------------
LSP Name    : ipmsi-1001-73728
LSP Type    : P2mpAutoLsp                      LSP Tunnel ID  : 61440
From        : 10.20.1.3                        
Adm State   : Up                               Oper State     : Up
LSP Up Time : 6d 21:08:37                      LSP Down Time  : 0d 00:00:00
Transitions : 1                                Path Changes   : 1
Retry Limit : 0                                Retry Timer    : 30 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : n/a
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Enabled                          Oper FR        : Enabled
FR Method   : Facility                         FR Hop Limit   : 16
FR Bandwidth: 0 Mbps                           FR Node Protect: Disabled
FR Object   : Enabled                          
CSPF        : Enabled                          ADSPEC         : Disabled
Metric      : Disabled                         Use TE metric  : Disabled
Include Grps:                                  Exclude Grps   :  
None                                           None
Least Fill  : Disabled                         
Auto BW     : Disabled                         
LdpOverRsvp : Disabled                         VprnAutoBind   : Disabled
IGP Shortcut: Disabled                         BGP Shortcut   : Disabled
BGPTransTun : Disabled                         
Oper Metric : Disabled                         
Prop Adm Grp: Disabled                         CSPFFirstLoose : Disabled
P2MPInstance: 1001                             P2MP-Inst-type : Primary
S2L Cfg Cou*: 4                                S2L Oper Count*: 4
S2l-Name    : path_ipmsi                       To             : 10.20.1.1
S2l-Name    : path_ipmsi                       To             : 10.20.1.2
S2l-Name    : path_ipmsi                       To             : 10.20.1.4
S2l-Name    : path_ipmsi                       To             : 10.20.1.5
------------------------------------------------------------------------
Type : Originating 
------------------------------------------------------------------------
LSP Name    : ipmsi-4000-73729
LSP Type    : P2mpAutoLsp                      LSP Tunnel ID  : 61441
From        : 10.20.1.3                        
Adm State   : Up                               Oper State     : Up
LSP Up Time : 6d 21:08:38                      LSP Down Time  : 0d 00:00:00
Transitions : 1                                Path Changes   : 1
Retry Limit : 0                                Retry Timer    : 30 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : n/a
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Enabled                          Oper FR        : Enabled
FR Method   : Facility                         FR Hop Limit   : 16
FR Bandwidth: 0 Mbps                           FR Node Protect: Disabled
FR Object   : Enabled                          
CSPF        : Enabled                          ADSPEC         : Disabled
Metric      : Disabled                         Use TE metric  : Disabled
Include Grps:                                  Exclude Grps   :  
None                                           None
Least Fill  : Disabled                         
Auto BW     : Disabled                         
LdpOverRsvp : Disabled                         VprnAutoBind   : Disabled
IGP Shortcut: Disabled                         BGP Shortcut   : Disabled
BGPTransTun : Disabled                         
Oper Metric : Disabled                         
Prop Adm Grp: Disabled                         CSPFFirstLoose : Disabled
P2MPInstance: 4000                             P2MP-Inst-type : Primary
S2L Cfg Cou*: 2                                S2L Oper Count*: 2
S2l-Name    : path_ipmsi                       To             : 10.20.1.1
S2l-Name    : path_ipmsi                       To             : 10.20.1.4
------------------------------------------------------------------------
Type : Originating 
------------------------------------------------------------------------
LSP Name    : ipmsi-65535-73730
LSP Type    : P2mpAutoLsp                      LSP Tunnel ID  : 61442
From        : 10.20.1.3                        
Adm State   : Up                               Oper State     : Up
LSP Up Time : 6d 21:08:39                      LSP Down Time  : 0d 00:00:00
Transitions : 1                                Path Changes   : 1
Retry Limit : 0                                Retry Timer    : 30 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : n/a
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Enabled                          Oper FR        : Enabled
FR Method   : Facility                         FR Hop Limit   : 16
FR Bandwidth: 0 Mbps                           FR Node Protect: Disabled
FR Object   : Enabled                          
CSPF        : Enabled                          ADSPEC         : Disabled
Metric      : Disabled                         Use TE metric  : Disabled
Include Grps:                                  Exclude Grps   :  
None                                           None
Least Fill  : Disabled                         
Auto BW     : Disabled                         
LdpOverRsvp : Disabled                         VprnAutoBind   : Disabled
IGP Shortcut: Disabled                         BGP Shortcut   : Disabled
BGPTransTun : Disabled                         
Oper Metric : Disabled                         
Prop Adm Grp: Disabled                         CSPFFirstLoose : Disabled
P2MPInstance: 65535                            P2MP-Inst-type : Primary
S2L Cfg Cou*: 2                                S2L Oper Count*: 2
S2l-Name    : path_ipmsi                       To             : 10.20.1.1
S2l-Name    : path_ipmsi                       To             : 10.20.1.4
========================================================================
* indicates that the corresponding row element may have been truncated.
 
 
*A:Dut-C#
*A:sim1>config>router>mpls>lsp$ show router mpls p2mp-lsp p2mp-instance s2l detail
========================================================================
MPLS LSP  S2L  (Detail)
========================================================================
Legend :
    @ - Detour Available                          # - Detour In Use
    b - Bandwidth Protected                       n - Node Protected
    S - Strict                                    L - Loose
    s - Soft Preemption
========================================================================
------------------------------------------------------------------------
LSP 1 S2L 1
------------------------------------------------------------------------
LSP Name    : 1                                  S2l LSP ID  : 26624
P2MP ID     : 0                                  S2l Grp Id  : 0
Adm State   : Up                                 Oper State  : Down
S2l State:  : Inactive                                       :
S2L Name    : 1                                  To          : 10.20.1.3
S2l Admin   : Up                                 S2l Oper    : Down
OutInterface: n/a                                Out Label   : n/a
S2L Up Time : 0d 00:00:00                        S2L Dn Time : 0d 00:00:01
RetryAttempt: 0                                  NextRetryIn : 9 sec (Fast)
S2L Trans   : 8                                  CSPF Queries: 4
Failure Code: noError                            Failure Node: n/a
ExplicitHops:
    10.20.1.2(S)
Actual Hops :
    No Hops Specified
ComputedHops:
    No Hops Specified
LastResignal: n/a
========================================================================
 
A:ALU-25# show router mpls p2mp-lsp lsp_1
========================================================================
MPLS LSPs (Originating)
========================================================================
LSP Name                      To/P2MP ID             Fastfail     Adm   Opr  
                                                       Config                  
------------------------------------------------------------------------
lsp_1                              18                  Yes        Up    Up   
------------------------------------------------------------------------
LSPs : 1
========================================================================
A:ALU-25#
 
A:ALU-25# show router mpls p2mp-lsp Test_p2mp detail
========================================================================
MPLS P2MP LSPs (Originating) (Detail)
========================================================================
------------------------------------------------------------------------
Type : Originating
------------------------------------------------------------------------
LSP Name    : lsp_1                            LSP Tunnel ID  : 1
From        : 10.10.1.1                        P2MP ID        : 18              
Adm State   : Up                               Oper State     : Down
LSP Up Time : 0d 00:00:00                      LSP Down Time  : 0d 20:39:48
Transitions : 0                                Path Changes   : 0
Retry Limit : 0                                Retry Timer    : 30 sec
Signaling   : RSVP                             Resv. Style    : FF
Hop Limit   : 255                              Adaptive       : Enabled
FastReroute : Disabled                         Oper FR        : Disabled
FR Method   : Facility                         FR Hop Limit   : 45             
FR Bandwidth: 0 Mbps                           FR Node Protect: Disabled        
FR Object   : Enabled                                                          
CSPF        : Disabled                         ADSPEC         : Disabled
Metric      : 1                                Use TE metric  : Disabled
Include Grps:                                  Exclude Grps   :
None                                           None
 
P2MPinstance:Test_p2mp                         p2mp-inst-type : primary
 
S2L Name    :Test-s2l1                         To             : 10.20.1.6
S2L Name    :Test-s2l2                         To             : 10.20.1.5
S2L Name    :Test-s2l3                         To             : 10.20.1.4
------------------------------------------------------------------------
A:ALU-25#
 
 
A:ALU-25# show router mpls p2mp-lsp Test_p2mp 
========================================================================
MPLS P2MP Instance (Originating)
========================================================================
------------------------------------------------------------------------
Type : Originating
------------------------------------------------------------------------
LSP Name    : lsp_1                            LSP Tunnel ID  : 1
P2MP ID     : 18                               Path LSP ID    : 18
Adm State   : Up                               Oper State     : Down
 
P2MPinstance:Test_p2mp                         p2mp-inst-type : primary
Inst Name   : lsp_1                            P2MP Inst ID   : 1
Adm State   : Up                               Oper State     : Down
Inst Up Time: 0d 00:00:00                      Inst Down Time : 0d 20:39:48
Hop Limit   : 255                              Adaptive       : Enabled
Record Route: Record                           Record Label   : Record          
Include Grps:                                  Exclude Grps   :
None                                           None
Bandwidth   : 0 Mbps                           Oper Bw        : 0 Mbps
 
S2L Name    :Test-s2l1                         To             : 10.20.1.6
S2L Name    :Test-s2l2                         To             : 10.20.1.5
S2L Name    :Test-s2l3                         To             : 10.20.1.4
------------------------------------------------------------------------
A:ALU-25# 

Note that the normal output is in detailed format only. There is no separate detail format.

A:ALU-52# show router mpls p2mp-lsp [p2mp-lsp-name] p2mp-instance [p2mp-inst-name] 
========================================================================
MPLS P2MP Instance (Originating)
========================================================================
------------------------------------------------------------------------
Type : Originating
------------------------------------------------------------------------
LSP Name    : lsp_1                            LSP Tunnel ID  : 1
P2MP ID     : 18                               Path LSP ID    : 18
Adm State   : Up                               Oper State     : Down
 
P2MPinstance:Test_p2mp                         p2mp-inst-type : primary
Inst Name   : lsp_1                            P2MP Inst ID   : 1
Adm State   : Up                               Oper State     : Down
Inst Up Time: 0d 00:00:00                      Inst Down Time : 0d 20:39:48
Hop Limit   : 255                              Adaptive       : Enabled
Record Route: Record                           Record Label   : Record          
Include Grps:                                  Exclude Grps   :
None                                           None
Bandwidth   : 0 Mbps                           Oper Bw        : 0 Mbps
 
S2L Name    :Test-s2l1                         To             : 10.20.1.6
S2L Name    :Test-s2l2                         To             : 10.20.1.5
S2L Name    :Test-s2l3                         To             : 10.20.1.4
------------------------------------------------------------------------
A:ALU-52#
 
 
A:ALU-52# show router mpls p2mp-lsp [p2mp-lsp-name] p2mp-instance [p2mp-inst-
name] mbb
========================================================================
MPLS P2MP Instance (Originating)
========================================================================
------------------------------------------------------------------------
Type : Originating
------------------------------------------------------------------------
LSP Name    : lsp_1                            LSP Tunnel ID  : 1
P2MP ID     : 18                               Path LSP ID    : 18
Adm State   : Up                               Oper State     : Down
 
P2MPinstance:Test_p2mp                         p2mp-inst-type : primary
Inst Name   : lsp_1                            P2MP Inst ID   : 1
Adm State   : Up                               Oper State     : Down
Inst Up Time: 0d 00:00:00                      Inst Down Time : 0d 20:39:48
Hop Limit   : 255                              Adaptive       : Enabled
Record Route: Record                           Record Label   : Record          
Include Grps:                                  Exclude Grps   :
None                                           None
Bandwidth   : 0 Mbps                           Oper Bw        : 0 Mbps
Last MBB    :    
MBB type    :                                  Mbb State      :
ended at    :                                  Old Metric     : 
In Prog MBB :
MBB type    :                                  Next Retry In  :
Started at  :                                  Retry Attempt  :
Failure code:                                  Failure Node   : 
 
S2L Name    :Test-s2l1                         To             : 10.20.1.6
S2l Admin   :                                  S2l Oper       :
Failure code:                                  Failure Node   : 10.12.1.1 
 
S2L Name    :Test-s2l1                         To             : 10.20.1.6
S2l Admin   :                                  S2l Oper       :
Failure code:                                  Failure Node   : 10.12.1.1 
------------------------------------------------------------------------
A:ALU-52#
 
 
A:ALU-52# show router mpls p2mp-lsp [p2mp-lsp-name] p2mp-instance [p2mp-inst-
name] s2l 
[s2l-name]
========================================================================
MPLS S2Ls (Originating)
========================================================================
S2L Name                           To             Next Hop     Adm   Opr
------------------------------------------------------------------------
Test-s2l1                          10.20.1.6      10.10.1.2    Up    Up   
------------------------------------------------------------------------
LSPs : 1
========================================================================
A:ALU-52#
 
 
A:ALU-52# show router mpls p2mp-lsp [p2mp-lsp-name] p2mp-instance [p2mp-inst-
name] s2l 
[s2l-name] detail
========================================================================
MPLS S2Ls (Originating) (Detail)
========================================================================
------------------------------------------------------------------------
Type : Originating
------------------------------------------------------------------------
LSP Name    : lsp_1                            LSP Tunnel ID  : 1
P2MP ID     : 18                               Path LSP ID    : 18
Adm State   : Up                               Oper State     : Down
 
P2MP Primary Instance:
Inst Name   : lsp_1                            P2MP Inst ID   : 1
Adm State   : Up                               Oper State     : Down
 
S2L Name    : Test-s2l1                        To             : 10.20.1.6
Adm State   : Up                               Oper State     : Down
OutInterface: 1/1/1                            Out Label      : 131071          
S2L Up Time : 0d 00:00:00                      S2L Down Time  : 0d 20:39:48
Transitions : 0                                Path Changes   : 0
Retry Limit : 0                                Retry Timer    : 30 sec          
RetryAttempt: 0                                NextRetryIn    : 0 sec           
Bandwidth   : No Reservation                   Oper Bw        : 0 Mbps          
Hop Limit   : 255                              Adaptive       : Enabled
Record Route: Record                           Record Label   : Record          
Oper MTU    : 1496                             Neg MTU        : 1496            
FastReroute : Disabled                         Oper FR        : Disabled
FR Method   : Facility                         FR Hop Limit   : 45             
FR Bandwidth: 0 Mbps                           FR Node Protect: Disabled        
FR Object   : Enabled
CSPF        : Disabled                         ADSPEC         : Disabled
Metric      : 1                                Use TE metric  : Disabled
Include Grps:                                  Exclude Grps   :
None                                           None
CSPF Queries: 9               
Failure Code: noError                          Failure Node   : n/a             
ExplicitHops:
    No Hops Specified
Actual Hops :
    10.10.1.1(10.20.1.1) @                     Record Label   : N/A
 -> 10.10.1.2(10.20.1.2)                       Record Label   : 131071
ComputedHops:                                                                  
    10.10.1.1       -> 10.10.1.2
LastResignal: n/a                              CSPF Metric    : 1000            
------------------------------------------------------------------------
A:ALU-52#
 
 
*A:Dut-C# show router mpls p2mp-lsp "ipmsi-1-73752" detail 
 
=======================================================================
MPLS P2MP LSPs (Originating) (Detail)
=======================================================================
-------------------------------------------------------------------------------
Type : Originating 
-----------------------------------------------------------------------
LSP Name    : ipmsi-1-73752
LSP Type    : P2mpAutoLsp                      LSP Tunnel ID  : 61445
From        : 10.20.1.3                        
Adm State   : Up                               Oper State     : Up
LSP Up Time : 0d 00:00:51                      LSP Down Time  : 0d 00:00:00
Transitions : 3                                Path Changes   : 3
Retry Limit : 0                                Retry Timer    : 30 sec
Signaling   : RSVP                             Resv. Style    : SE
Hop Limit   : 255                              Negotiated MTU : n/a
Adaptive    : Enabled                          ClassType      : 0
FastReroute : Enabled                          Oper FR        : Enabled
FR Method   : Facility                         FR Hop Limit   : 16
FR Node Pro*: Disabled                         FR Prop Adm Grp: Disabled
FR Object   : Enabled                          
Egress Stats: Enabled                          Egress Oper St*: Out-of-resource
CSPF        : Enabled                          ADSPEC         : Disabled
Metric      : Disabled                         Use TE metric  : Disabled
Include Grps:                                  Exclude Grps   :  
None                                           None
Least Fill  : Disabled                         
 
Auto BW     : Disabled                         
LdpOverRsvp : Enabled                          VprnAutoBind   : Enabled
IGP Shortcut: Enabled                          BGP Shortcut   : Enabled
IGP LFA     : Disabled                         IGP Rel Metric : Disabled
BGPTransTun : Enabled                          
Oper Metric : Disabled                         
Prop Adm Grp: Disabled                         
 
P2MPInstance: 1                                P2MP-Inst-type : Primary
S2L Cfg Cou*: 4                                S2L Oper Count*: 4
S2l-Name    : path_ipmsi                       To             : 10.20.1.1
S2l-Name    : path_ipmsi                       To             : 10.20.1.2
S2l-Name    : path_ipmsi                       To             : 10.20.1.5
S2l-Name    : path_ipmsi                       To             : 10.20.1.6
=======================================================================

path

Syntax 
path [path-name] [lsp-binding]
path path-name p2mp-lsp-binding
Context 
show>router>mpls
Description 

This command displays MPLS paths.

Parameters 
path-name—
Specifies the unique name label for the LSP path.
lsp-binding—
Displays binding information.
p2mp-lsp-binding—
Displays binding information.
Output 

MPLS Path Output

Table 25 describes MPLS Path output fields.

Table 25:  MPLS Path Output Fields 

Label

Description 

Path Name

The unique name label for the LSP path.

Adm

Down — The path is administratively disabled.

Up — The path is administratively enabled.

Hop Index

The value used to order the hops in a path.

IP Address

The IP address of the hop that the LSP should traverse on the way to the egress router.

Strict/Loose

Strict — The LSP must take a direct path from the previous hop router to the next router.

Loose — The route taken by the LSP from the previous hop to the next hop can traverse through other routers.

LSP Name

The name of the LSP used in the path.

Binding

Primary — The preferred path for the LSP.

Secondary — The standby path for the LSP.

Paths

Total number of paths configured.

Sample Output
*A:SRU4>config>router>mpls# show router mpls path
===============================================================================
MPLS Path:
===============================================================================
Path Name                       Adm  Hop Index   IP Address       Strict/Loose
-------------------------------------------------------------------------------
to_10_30_1_1                    Up   no hops     n/a              n/a
to_10_30_1_2                    Up   no hops     n/a              n/a
to_10_30_1_3                    Up   no hops     n/a              n/a
to_10_30_1_4                    Up   no hops     n/a              n/a
to_10_30_1_5                    Up   no hops     n/a              n/a
to_10_30_1_6                    Up   no hops     n/a              n/a
to_10_30_1_110                  Up   no hops     n/a              n/a
to_10_8_100_15                  Up   no hops     n/a              n/a
to_10_20_1_20                   Up   no hops     n/a              n/a
to_10_20_1_22                   Up   no hops     n/a              n/a
to_10_100_1_1                   Up   no hops     n/a              n/a
------------------------------------------------------------------------------
Paths : 11
===============================================================================
*A:SRU4>config>router>mpls#
 
 
*A:SRU4>config>router>mpls# show router mpls path lsp-binding
===============================================================================
MPLS Path:
===============================================================================
Path Name                        Opr  LSP Name                         Binding
-------------------------------------------------------------------------------
to_10_30_1_1                     Up   to_10_30_1_1_cspf               Primary
                                 Up   to_10_30_1_1_cspf_2             Primary
                                 Up   to_10_30_1_1_cspf_3             Primary
Up   to_10_30_1_1_cspf_16             Primary
                                 Up   to_10_30_1_1_cspf_17            Primary
                                 Up   to_10_30_1_1_cspf_18            Primary
                                 Up   to_10_30_1_1_cspf_19            Primary
                                 Up   to_10_30_1_1_cspf_20            Primary
to_10_30_1_2                     Up   to_10_30_1_2_cspf               Primary
                                 Up   to_10_30_1_2_cspf_2             Primary
                                 Up   to_10_30_1_2_cspf_3             Primary
                                 Up   to_10_30_1_2_cspf_4             Primary
                                 Up   to_10_30_1_2_cspf_5             Primary
...
to_10_100_1_1                    Down to_10_100_1_1_cspf              Primary
                                 Down to_10_100_1_1_cspf_2            Primary
                                 Down to_10_100_1_1_cspf_3            Primary
                                 Down to_10_100_1_1_cspf_4             Primary
                                 Down to_10_100_1_1_cspf_5             Primary
                                 Down to_10_100_1_1_cspf_6             Primary
Down to_10_100_1_1_cspf_13            Primary
                                 Down to_10_100_1_1_cspf_14            Primary
                                 Down to_10_100_1_1_cspf_15            Primary
                                 Down to_10_100_1_1_cspf_16            Primary
                                 Down to_10_100_1_1_cspf_17            Primary
                                 Down to_10_100_1_1_cspf_18            Primary
                                 Down to_10_100_1_1_cspf_19            Primary
                                 Down to_10_100_1_1_cspf_20            Primary
-------------------------------------------------------------------------------
Paths : 11
===============================================================================
*A:SRU4>config>router>mpls#

sr-te-lsp

Syntax 
sr-te-lsp [lsp-name] [status {up | down}] [detail] path [path-name] [auto-lsp {all | mesh-p2p-srte | one-hop-p2p-srte}]
sr-te-lsp [lsp-name] [detail] [auto-lsp {all | mesh-p2p-srte | one-hop-p2p-srte}]
sr-te-lsp [lsp-name] [status {up | down}] [to ip-address] [detail] [auto-lsp {all | mesh-p2p-srte | one-hop-p2p-srte}]
Context 
show>router>mpls
Description 

This command displays SR-TE-LSP information.

Parameters 
lsp-name
Specifies the name of the SR-TE LSP, up to 64 characters in length.
detail—
Displays detailed information.
status—
Allows filtering of the output based on the status of the SR-TE LSP.
Values—
up, down

 

path path-name
Displays SR-TE LSP path information.
to ip-address
Displays the IP address of the egress router for the LSP.
Output 

The following output is an example of MPLS SR-TE LSP fields.

Sample Output
*A:Phoenix 199# show router mpls sr-te-lsp
===============================================================================
MPLS SR-TE LSPs (Originating)
===============================================================================
LSP Name                           To               Tun     Protect   Adm  Opr
                                                    Id      Path
-------------------------------------------------------------------------------
Phoenix-SL-1                       192.168.48.223   1       N/A       Up   Up
Phoenix-SL-2-Profile               192.168.48.223   2       N/A       Up   Up
Phoenix-SL-3-Profile               192.168.48.223   3       N/A       Up   Up
Phoenix-SL-4-Profile               192.168.48.223   4       N/A       Up   Up
Phoenix-SL-1-Profile               192.168.48.223   5       N/A       Up   Up
Phoenix-SL-2                       192.168.48.223   6       N/A       Up   Up
Phoenix-SL-3                       192.168.48.223   7       N/A       Up   Up
Phoenix-SL-4                       192.168.48.223   8       N/A       Up   Up
sr-te-level2-mesh-192.168.48.198-  192.168.48.198   61442   N/A       Up   Up
716803
sr-te-level2-mesh-192.168.48.221-  192.168.48.221   61443   N/A       Up   Up
716804
sr-te-level2-mesh-192.168.48.223-  192.168.48.223   61444   N/A       Up   Up
716805
-------------------------------------------------------------------------------
LSPs : 17
===============================================================================
show router mpls sr-te-lsp detail
===============================================================================
MPLS LSP Templates (Detail)
===============================================================================
-------------------------------------------------------------------------------
LSP Template : test-mesh
-------------------------------------------------------------------------------
Type               : MeshP2PSrTe     
Max SR Labels      : 6                  Additional FRR Lab*: 1
===============================================================================
*A:Dut-A>config>service# show router mpls sr-te-lsp "1" detail 
===============================================================================
MPLS SR-TE LSPs (Originating) (Detail)
===============================================================================
Legend : 
    + - Inherited
===============================================================================
-------------------------------------------------------------------------------
Type : Originating 
-------------------------------------------------------------------------------
LSP Name        : 1
LSP Type        : SrTeLsp                   LSP Tunnel ID        : 1
LSP Index       : 65536                     TTM Tunnel Id        : 655362
From            : 10.20.1.1                 To                   : 10.20.1.6
Adm State       : Up                        Oper State           : Up
LSP Up Time     : 0d 00:57:57               LSP Down Time        : 0d 00:00:00
Transitions     : 2                         Path Changes         : 2
Retry Limit     : 0                         Retry Timer          : 30 sec
Hop Limit       : 255                       Negotiated MTU       : 1488
CSPF            : Enabled                   
Metric          : N/A                       Use TE metric        : Disabled
Include Grps    :                           Exclude Grps         :  
None                                           None
Entropy Label   : Enabled+                  Oper Entropy Label   : Enabled
Negotiated EL   : Enabled                   
VprnAutoBind    : Enabled                   
IGP Shortcut    : Enabled                   BGP Shortcut         : Enabled
IGP LFA         : Disabled                  IGP Rel Metric       : Disabled
BGPTransTun     : Enabled                   
Oper Metric     : 16777215                  
PCE Report      : Disabled+                 
PCE Compute     : Disabled                  PCE Control          : Disabled
Max SR Labels   : 5                         Additional FRR Labels: 1
Path Profile    : None                      
Load Bal Wt.    : 0                         
 
Primary(a)      : paf                       Up Time              : 0d 00:57:57
Bandwidth       : 0 Mbps                    
===============================================================================
*A:Dut-A>config>service# 
*A:Phoenix 199# show router mpls sr-te-lsp "sr-te-level2-mesh-192.168.48.223-
716805" detail
===============================================================================
MPLS SR-TE LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name        : sr-te-level2-mesh-192.168.48.223-716805
LSP Type        : MeshP2PSrTe               LSP Tunnel ID        : 61444
LSP Index       : 126979                    TTM Tunnel Id        : 716805
From            : 192.168.48.199            To                   : 192.168.48.2*
Adm State       : Up                        Oper State           : Up
LSP Up Time     : 0d 00:02:12               LSP Down Time        : 0d 00:00:00
Transitions     : 3                         Path Changes         : 3
Retry Limit     : 0                         Retry Timer          : 30 sec
CSPF            : Enabled
Metric          : N/A                       Use TE metric        : Disabled
Include Grps    :                           Exclude Grps         :
None                                           None
VprnAutoBind    : Enabled
IGP Shortcut    : Enabled                   BGP Shortcut         : Enabled
IGP LFA         : Disabled                  IGP Rel Metric       : Disabled
BGPTransTun     : Enabled
Oper Metric     : 16777215
PCE Report      : Enabled
PCE Compute     : Disabled                  PCE Control          : Disabled
Max SR Labels   : 8                         Additional FRR Labels: 2
Path Profile    :
None
Primary(a)      : loose-anycast-sid         Up Time              : 0d 00:02:12
Bandwidth       : 0 Mbps
===============================================================================
*A:Phoenix 199# show router mpls sr-te-lsp "sr-te-level2-mesh-192.168.48.223-
716805" path detail
===============================================================================
MPLS SR-TE LSP sr-te-level2-mesh-192.168.48.223-716805 Path  (Detail)
===============================================================================
Legend :
    S      - Strict                      L      - Loose
    A-SID  - Adjacency SID               N-SID  - Node SID
    +      - Inherited
===============================================================================
-------------------------------------------------------------------------------
SR-TE LSP sr-te-level2-mesh-192.168.48.223-716805 Path loose-anycast-sid
-------------------------------------------------------------------------------
LSP Name         : sr-te-level2-mesh-192.168.48.223-716805
Path LSP ID      : 20480
From             : 192.168.48.199       To                   : 192.168.48.223
Admin State      : Up                   Oper State           : Up
Path Name        : loose-anycast-sid    Path Type            : Primary
Path Admin       : Up                   Path Oper            : Up
Path Up Time     : 0d 02:30:28          Path Down Time       : 0d 00:00:00
Retry Limit      : 0                    Retry Timer          : 30 sec
Retry Attempt    : 1                    Next Retry In        : 0 sec
CSPF             : Enabled              Oper CSPF            : Enabled
Bandwidth        : No Reservation       Oper Bandwidth       : 0 Mbps
Hop Limit        : 255                  Oper HopLimit        : 255
Setup Priority   : 7                    Oper Setup Priority  : 7
Hold Priority    : 0                    Oper Hold Priority   : 0
Inter-area       : N/A
PCE Updt ID      : 0                    PCE Updt State       : None
PCE Upd Fail Code: noError
PCE Report       : Enabled              Oper PCE Report      : Disabled
PCE Control      : Disabled             Oper PCE Control     : Disabled
PCE Compute      : Disabled
Include Groups   :                      Oper Include Groups  :
None                                           None
Exclude Groups   :                      Oper Exclude Groups  :
None                                           None
IGP/TE Metric    : 16777215             Oper Metric          : 16777215
Oper MTU         : 1492                 Path Trans           : 1
Failure Code     : noError
Failure Node     : n/a
Explicit Hops    :
    192.168.48.99(L)
Actual Hops      :
    192.168.48.99 (192.168.48.185)(N-SID)        Record Label        : 200099
 -> 192.168.48.223 (192.168.48.223)(N-SID)       Record Label        : 200323
===============================================================================
*A:Phoneix 199# show router mpls sr-te-lsp
  - sr-te-lsp [<lsp-name>] [status {up|down}] [detail] path [<path-name>]
    [auto-lsp {all|mesh-p2p-srte|one-hop-p2p-srte}]
  - sr-te-lsp [<lsp-name>] [detail] [auto-lsp {all|mesh-p2p-srte|
    one-hop-p2p-srte}]
  - sr-te-lsp [<lsp-name>] [status {up|down}] [to <ip-address>] [detail]
    [auto-lsp {all|mesh-p2p-srte|one-hop-p2p-srte}]
<lsp-name>           : [64 chars max]
<up|down>            : up|down
<ip-address>         : a.b.c.d
<detail>             : keyword
<path>               : keyword
<path-name>          : [32 chars max]
<all|mesh-p2p-srte*> : keyword - specify type of auto-lsp
 
*A:Phoneix 199# show router mpls sr-te-lsp auto-lsp all
===============================================================================
MPLS Auto SR-TE LSPs (Originating)
===============================================================================
LSP Name                           To               Tun     Protect   Adm  Opr
                                                    Id      Path
-------------------------------------------------------------------------------
sr-te-level2-mesh-192.168.48.221-  192.168.48.221   61443   N/A       Up   Up
716804
sr-te-level2-mesh-192.168.48.223-  192.168.48.223   61444   N/A       Up   Up
716805
-------------------------------------------------------------------------------
LSPs : 2
===============================================================================
 
*A:Phoneix 199# show router mpls sr-te-lsp auto-lsp mesh-p2p-srte
===============================================================================
MPLS Auto SR-TE LSPs (Originating)
===============================================================================
LSP Name                           To               Tun     Protect   Adm  Opr
                                                    Id      Path
-------------------------------------------------------------------------------
sr-te-level2-mesh-192.168.48.221-   192.168.48.221    61443   N/A     Up   Up
716804
sr-te-level2-mesh-192.168.48.223-   192.168.48.223    61444   N/A     Up   Up
716805
-------------------------------------------------------------------------------
LSPs : 2
===============================================================================

The following output applies to router- or PCC-controlled SR-TE LSPs.

*A:Dut-A# show router mpls sr-te-lsp "srTeRtrControlled" path "1" detail 
=======================================================================
MPLS SR-TE LSP srTeRtrControlled Path 1 (Detail)
=======================================================================
Legend : 
    S - Strict                        L - Loose
=======================================================================
-----------------------------------------------------------------------
SR-TE LSP srTeRtrControlled Path 1
-----------------------------------------------------------------------
LSP Name         : srTeRtrControlled
Path LSP ID      : 1024                 
From             : 10.20.1.1            To                   : 10.20.1.6
Admin State      : Up                   Oper State           : Up
Path Name        : 1                    Path Type            : Primary
Path Admin       : Up                   Path Oper            : Up
Path Up Time     : 0d 00:03:19          Path Down Time       : 0d 00:00:00
Retry Limit      : 0                    Retry Timer          : 30 sec
Retry Attempt    : 1                    Next Retry In        : 0 sec
 
CSPF             : Disabled             Oper CSPF            : Disabled
 
Bandwidth        : No Reservation       Oper Bandwidth       : 0 Mbps
Hop Limit        : 255                  Oper HopLimit        : 255
Setup Priority   : 7                    Oper Setup Priority  : 7
Hold Priority    : 0                    Oper Hold Priority   : 0
Inter-area       : N/A                  
 
PCE Updt ID      : 0                    PCE Updt State       : None
PCE Upd Fail Code: noError
 
PCE Report       : Inherited            Oper PCE Report      : Disabled
PCE Control      : Disabled             Oper PCE Control     : Disabled PCE Compute 
                 : Disabled             
 
Include Groups   :                      Oper Include Groups  : 
None                                           None
Exclude Groups   :                      Oper Exclude Groups  : 
None                                           None
                                      
IGP/TE Metric    : 16777215             Oper Metric          : 16777215
Oper MTU         : 1484                 Path Trans           : 1
Failure Code     : noError
Failure Node     : n/a                  
Explicit Hops    :                      
    10.20.1.2(S)       -> 10.20.1.3(L)      
Actual Hops      :                      
    10.10.1.2 (10.20.1.2)                        Record Label        : 262143
 -> 10.20.1.3 (10.20.1.3)                        Record Label        : 102003
 -> 10.20.1.6 (10.20.1.6)                        Record Label        : 103006
=======================================================================
 
*A:Dut-A# show router mpls sr-te-lsp "srTeRtrControlled" detail 
=======================================================================
MPLS SR-TE LSPs (Originating) (Detail)
=======================================================================
-----------------------------------------------------------------------
Type : Originating 
-----------------------------------------------------------------------
LSP Name    : srTeRtrControlled
LSP Type    : SrTeLsp                          LSP Tunnel ID  : 2
LSP Index   : 65537                            TTM Tunnel Id  : 655363
From        : 10.20.1.1                        To             : 10.20.1.6
Adm State   : Up                               Oper State     : Up
LSP Up Time : 0d 00:06:09                      LSP Down Time  : 0d 00:00:00
Transitions : 1                                Path Changes   : 1
Retry Limit : 0                                Retry Timer    : 30 sec
Hop Limit   : 255                              Negotiated MTU : 1484
CSPF        : Disabled                         
Metric      : N/A                              
Include Grps:                                  Exclude Grps   :  
None                                           None
 
VprnAutoBind: Enabled                          
IGP Shortcut: Enabled                          BGP Shortcut   : Enabled
IGP LFA     : Disabled                         IGP Rel Metric : Disabled
BGPTransTun : Enabled                          
Oper Metric : 16777215                         
PCE Report  : Inherited                        Max SR Labels  : 6
PCE Compute : Disabled                         PCE Control    : Disabled
Path Profile:                                  
None
 
Primary(a)  : 1                                Up Time        : 0d 00:06:09
Bandwidth   : 0 Mbps                           
=======================================================================
Outputs with other filters:
---------------------------
*A:Dut-A# show router mpls sr-te-lsp 
===============================================================================
MPLS SR-TE LSPs (Originating)
=======================================================================
LSP Name                           To               Tun     Protect   Adm  Opr
                                                    Id      Path           
-----------------------------------------------------------------------
sr-te1                             10.20.1.6        1       N/A       Up   Up
srTeRtrControlled                  10.20.1.6        2       N/A       Up   Up
-----------------------------------------------------------------------
LSPs : 2
=======================================================================
 
*A:Dut-A# show router mpls sr-te-lsp path 
=======================================================================
MPLS SR-TE LSP  Path
=======================================================================
-----------------------------------------------------------------------
LSP Name         : sr-te1               To                   : 10.20.1.6
Adm State        : Up                   Oper State           : Up
-----------------------------------------------------------------------
Path Name                        Type           Adm  Opr
-----------------------------------------------------------------------
1                                Primary         Up   Up
-----------------------------------------------------------------------
LSP Name         : srTeRtrControlled    To                   : 10.20.1.6
Adm State        : Up                   Oper State           : Up
-----------------------------------------------------------------------
Path Name                        Type           Adm  Opr
-----------------------------------------------------------------------
1                                Primary         Up   Up
=======================================================================
 
*A:Dut-A# show router mpls sr-te-lsp to 10.20.1.6 
=======================================================================
MPLS SRTE LSPs (Originating) 
=======================================================================
LSP Name                           To               Tun     Protect   Adm  Opr
                                                    Id      Path           
-----------------------------------------------------------------------
sr-te1                             10.20.1.6        1       N/A       Up   Up
srTeRtrControlled                  10.20.1.6        2       N/A       Up   Up
-----------------------------------------------------------------------
LSPs : 2
=======================================================================
*A:Dut-A# show router mpls sr-te-lsp status up 
=======================================================================
MPLS SR-TE LSPs (Originating)
=======================================================================
LSP Name                           To               Tun     Protect   Adm  Opr
                                                    Id      Path           
-----------------------------------------------------------------------
sr-te1                             10.20.1.6        1       N/A       Up   Up
srTeRtrControlled                  10.20.1.6        2       N/A       Up   Up
-----------------------------------------------------------------------
LSPs : 2
=======================================================================
 
*A:Dut-A# show router mpls sr-te-lsp "srTeRtrControlled" status up detail path "1" 
=======================================================================
MPLS SR-TE LSP srTeRtrControlled Path 1 (Detail)
=======================================================================
Legend : 
    S - Strict                        L - Loose
=======================================================================
-----------------------------------------------------------------------
SR-TE LSP srTeRtrControlled Path 1
-----------------------------------------------------------------------
LSP Name         : srTeRtrControlled
Path LSP ID      : 1024                 
From             : 10.20.1.1            To                   : 10.20.1.6
Admin State      : Up                   Oper State           : Up
Path Name        : 1                    Path Type            : Primary
Path Admin       : Up                   Path Oper            : Up
Path Up Time     : 0d 00:07:12          Path Down Time       : 0d 00:00:00
Retry Limit      : 0                    Retry Timer          : 30 sec
Retry Attempt    : 1                    Next Retry In        : 0 sec
 
CSPF             : Disabled             Oper CSPF            : Disabled
 
Bandwidth        : No Reservation       Oper Bandwidth       : 0 Mbps
Hop Limit        : 255                  Oper HopLimit        : 255
Setup Priority   : 7                    Oper Setup Priority  : 7
Hold Priority    : 0                    Oper Hold Priority   : 0
Inter-area       : N/A                  
 
PCE Updt ID      : 0                    PCE Updt State       : None
PCE Upd Fail Code: noError
 
PCE Report       : Inherited            Oper PCE Report      : Disabled
PCE Control      : Disabled             Oper PCE Control     : Disabled
PCE Compute      : Disabled             
 
Include Groups   :                      Oper Include Groups  : 
None                                           None
Exclude Groups   :                      Oper Exclude Groups  : 
None                                           None
                                      
IGP/TE Metric    : 16777215             Oper Metric          : 16777215
Oper MTU         : 1484                 Path Trans           : 1
Failure Code     : noError
Failure Node     : n/a                  
Explicit Hops    :                      
    10.20.1.2(S)       -> 10.20.1.3(L)      
Actual Hops      :                      
    10.10.1.2 (10.20.1.2)                        Record Label        : 262143
 -> 10.20.1.3 (10.20.1.3)                        Record Label        : 102003
 -> 10.20.1.6 (10.20.1.6)                        Record Label        : 103006
 
=======================================================================
 

The following output applies to PCE-computed SR-TE LSPs.

*A:Dut-B>config>router>mpls>lsp# /show router mpls sr-te-lsp "srte_lsp" path detail 
===============================================================================
MPLS SR-TE LSP srte_lsp Path  (Detail)
===============================================================================
Legend : 
    S - Strict                        L - Loose
===============================================================================
-------------------------------------------------------------------------------
SR-TE LSP srte_lsp Path fully_loose
-------------------------------------------------------------------------------
LSP Name         : srte_lsp
Path LSP ID      : 2                    
From             : 10.20.1.2            To                   : 10.20.1.5
Admin State      : Up                   Oper State           : Up
Path Name        : fully_loose          Path Type            : Primary
Path Admin       : Up                   Path Oper            : Up
Path Up Time     : 0d 10:48:05          Path Down Time       : 0d 00:00:00
Retry Limit      : 0                    Retry Timer          : 30 sec
Retry Attempt    : 1                    Next Retry In        : 0 sec
CSPF             : Enabled              Oper CSPF            : Enabled
Bandwidth        : No Reservation       Oper Bandwidth       : 0 Mbps
Hop Limit        : 255                  Oper HopLimit        : 255
Setup Priority   : 7                    Oper Setup Priority  : 7
Hold Priority    : 0                    Oper Hold Priority   : 0
Inter-area       : N/A                  
 
PCE Updt ID      : 0                    PCE Updt State       : None
PCE Upd Fail Code: noError
PCE Report       : Enabled              Oper PCE Report      : Enabled
PCE Control      : Disabled             Oper PCE Control     : Disabled
PCE Compute      : Enabled              
 
Include Groups   :                      Oper Include Groups  : 
None                                           None
Exclude Groups   :                      Oper Exclude Groups  : 
None                                           None
                                      
IGP/TE Metric    : 20                   Oper Metric          : 20
Oper MTU         : 1492                 Path Trans           : 1
Failure Code     : noError
Failure Node     : n/a                  
Explicit Hops    :                      
    No Hops Specified
Actual Hops      :                      
    192.168.2.1                                     Record Label        : 131071
-> 192.168.5.5                                      Record Label        : 131068
===============================================================================
 
*A:Dut-B>config>router>mpls>lsp# /show router mpls sr-te-lsp "srte_lsp" detail 
===============================================================================
MPLS SR-TE LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating 
-------------------------------------------------------------------------------
LSP Name        : srte_lsp
LSP Type        : SrTeLsp                   LSP Tunnel ID        : 1
LSP Index       : 65536                     TTM Tunnel Id        : 655362
From            : 10.20.1.2                 To                   : 10.20.1.5
Adm State       : Up                        Oper State           : Up
LSP Up Time     : 0d 10:48:17               LSP Down Time        : 0d 00:00:00
Transitions     : 1                         Path Changes         : 1
Retry Limit     : 0                         Retry Timer          : 30 sec
Hop Limit       : 255                       Negotiated MTU       : 1492
CSPF            : Enabled                   
Metric          : N/A                       Use TE metric        : Disabled
Include Grps    :                           Exclude Grps         :  
None                                           None
VprnAutoBind    : Enabled                   
IGP Shortcut    : Enabled                   BGP Shortcut         : Enabled
IGP LFA         : Disabled                  IGP Rel Metric       : Disabled
BGPTransTun     : Enabled                   
Oper Metric     : 20                        
PCE Report      : Enabled                   
PCE Compute     : Enabled                   PCE Control          : Disabled
Max SR Labels   : 6                         Additional FRR Labels: 1
Path Profile    :                           
None
Primary(a)      : fully_loose               Up Time              : 0d 10:48:17
Bandwidth       : 0 Mbps                    
===============================================================================

The following output applies to a PCE-computed SR-TE LSP when pce-report sr-te is enabled under MPLS.

*A:Dut-B>config>router>mpls>lsp# /show router mpls sr-te-lsp "srte_lsp" path detail 
===============================================================================
MPLS SR-TE LSP srte_lsp Path  (Detail)
===============================================================================
Legend : 
    S - Strict                        L - Loose
===============================================================================
-------------------------------------------------------------------------------
SR-TE LSP srte_lsp Path fully_loose
-------------------------------------------------------------------------------
LSP Name         : srte_lsp
Path LSP ID      : 2                    
From             : 10.20.1.2            To                   : 10.20.1.5
Admin State      : Up                   Oper State           : Up
Path Name        : fully_loose          Path Type            : Primary
Path Admin       : Up                   Path Oper            : Up
Path Up Time     : 0d 10:51:47          Path Down Time       : 0d 00:00:00
Retry Limit      : 0                    Retry Timer          : 30 sec
Retry Attempt    : 1                    Next Retry In        : 0 sec
CSPF             : Enabled              Oper CSPF            : Enabled
Bandwidth        : No Reservation       Oper Bandwidth       : 0 Mbps
Hop Limit        : 255                  Oper HopLimit        : 255
Setup Priority   : 7                    Oper Setup Priority  : 7
Hold Priority    : 0                    Oper Hold Priority   : 0
Inter-area       : N/A                  
 
PCE Updt ID      : 0                    PCE Updt State       : None
PCE Upd Fail Code: noError
PCE Report       : Inherited            Oper PCE Report      : Enabled
PCE Control      : Disabled             Oper PCE Control     : Disabled
PCE Compute      : Enabled              
 
Include Groups   :                      Oper Include Groups  : 
None                                           None
Exclude Groups   :                      Oper Exclude Groups  : 
None                                           None
                                      
IGP/TE Metric    : 20                   Oper Metric          : 20
Oper MTU         : 1492                 Path Trans           : 1
Failure Code     : noError
Failure Node     : n/a                  
Explicit Hops    :                      
    No Hops Specified
Actual Hops      :                      
    192.168.2.1                                 Record Label        : 131071
-> 192.168.5.5                                  Record Label        : 131068
===============================================================================
 
*A:Dut-B>config>router>mpls>lsp# /show router mpls sr-te-lsp "srte_lsp" detail 
===============================================================================
MPLS SR-TE LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating 
-------------------------------------------------------------------------------
LSP Name        : srte_lsp
LSP Type        : SrTeLsp                   LSP Tunnel ID        : 1
LSP Index       : 65536                     TTM Tunnel Id        : 655362
From            : 10.20.1.2                 To                   : 10.20.1.5
Adm State       : Up                        Oper State           : Up
LSP Up Time     : 0d 10:52:16               LSP Down Time        : 0d 00:00:00
Transitions     : 1                         Path Changes         : 1
Retry Limit     : 0                         Retry Timer          : 30 sec
Hop Limit       : 255                       Negotiated MTU       : 1492
CSPF            : Enabled                   
Metric          : N/A                       Use TE metric        : Disabled
Include Grps    :                           Exclude Grps         :  
None                                           None
VprnAutoBind    : Enabled                   
IGP Shortcut    : Enabled                   BGP Shortcut         : Enabled
IGP LFA         : Disabled                  IGP Rel Metric       : Disabled
BGPTransTun     : Enabled                   
Oper Metric     : 20                        
PCE Report      : Inherited                 
PCE Compute     : Enabled                   PCE Control          : Disabled
Max SR Labels   : 6                         Additional FRR Labels: 1
Path Profile    :                           
None
Primary(a)      : fully_loose               Up Time              : 0d 10:52:16
Bandwidth       : 0 Mbps                    
===============================================================================

The following output applies to PCE-controlled SR-TE LSPs.

*A:Dut-B>config>router>pcep>pcc# /show router mpls sr-te-lsp "srte_lsp" path detail 
=============================================================================
MPLS SR-TE LSP srte_lsp Path  (Detail)
=============================================================================
Legend : 
    S - Strict                        L - Loose
=============================================================================
-----------------------------------------------------------------------------
SR-TE LSP srte_lsp Path fully_loose
-----------------------------------------------------------------------------
LSP Name         : srte_lsp
Path LSP ID      : 2                    
From             : 10.20.1.2            To                   : 10.20.1.5
Admin State      : Up                   Oper State           : Up
Path Name        : fully_loose          Path Type            : Primary
Path Admin       : Up                   Path Oper            : Up
Path Up Time     : 0d 00:01:07          Path Down Time       : 0d 00:00:00
Retry Limit      : 0                    Retry Timer          : 30 sec
Retry Attempt    : 1                    Next Retry In        : 0 sec
CSPF             : Enabled              Oper CSPF            : Enabled
Bandwidth        : No Reservation       Oper Bandwidth       : 0 Mbps
Hop Limit        : 255                  Oper HopLimit        : 255
Setup Priority   : 7                    Oper Setup Priority  : 7
Hold Priority    : 0                    Oper Hold Priority   : 0
Inter-area       : N/A                  
 
PCE Updt ID      : 0                    PCE Updt State       : None
PCE Upd Fail Code: noError
PCE Report       : Enabled              Oper PCE Report      : Enabled
PCE Control      : Enabled              Oper PCE Control     : Enabled
PCE Compute      : Enabled              
 
Include Groups   :                      Oper Include Groups  : 
None                                           None
Exclude Groups   :                      Oper Exclude Groups  : 
None                                           None
                                      
IGP/TE Metric    : 20                   Oper Metric          : 20
Oper MTU         : 1492                 Path Trans           : 1
Failure Code     : noError
Failure Node     : n/a                  
Explicit Hops    :                      
    No Hops Specified
Actual Hops      :                      
    192.168.2.1                                     Record Label        : 131071
-> 192.168.5.5                                      Record Label        : 131068
=============================================================================
 
*A:Dut-B>config>router>pcep>pcc#  /show router mpls sr-te-lsp "srte_lsp" detail 
=============================================================================
MPLS SR-TE LSPs (Originating) (Detail)
=============================================================================
-----------------------------------------------------------------------------
Type : Originating 
-----------------------------------------------------------------------------
LSP Name        : srte_lsp
LSP Type        : SrTeLsp                   LSP Tunnel ID        : 1
LSP Index       : 65536                     TTM Tunnel Id        : 655362
From            : 10.20.1.2                 To                   : 10.20.1.5
Adm State       : Up                        Oper State           : Up
LSP Up Time     : 0d 00:01:38               LSP Down Time        : 0d 00:00:00
Transitions     : 1                         Path Changes         : 1
Retry Limit     : 0                         Retry Timer          : 30 sec
Hop Limit       : 255                       Negotiated MTU       : 1492
CSPF            : Enabled                   
Metric          : N/A                       Use TE metric        : Disabled
Include Grps    :                           Exclude Grps         :  
None                                           None
VprnAutoBind    : Enabled                   
IGP Shortcut    : Enabled                   BGP Shortcut         : Enabled
IGP LFA         : Disabled                  IGP Rel Metric       : Disabled
BGPTransTun     : Enabled                   
Oper Metric     : 20                        
PCE Report      : Enabled                   
PCE Compute     : Enabled                   PCE Control          : Enabled
Max SR Labels   : 6                         Additional FRR Labels: 1
Path Profile    :                           
None
Primary(a)      : fully_loose               Up Time              : 0d 00:01:38
Bandwidth       : 0 Mbps                    
=============================================================================
 
*A:Dut-B>config>router>mpls>lsp# /show router pcep pcc lsp-db 
=============================================================================
PCEP Path Computation Client (PCC) LSP Update Info
=============================================================================
PCEP-specific LSP ID: 3                 
LSP ID              : 2                 LSP Type            : seg-rt
Tunnel ID           : 1                 Extended Tunnel Id  : 10.20.1.2
LSP Name            : srte_lsp::fully_loose
Source Address      : 10.20.1.2         Destination Address : 10.20.1.5
LSP Delegated       : True              Delegate PCE Address: 10.20.1.24
Oper Status         : active            
=============================================================================
*A:Dut-B>config>router>mpls>lsp# /show router mpls sr-te-lsp "srte_lsp" path 
=============================================================================
MPLS SR-TE LSP srte_lsp Path
=============================================================================
-----------------------------------------------------------------------------
LSP Name         : srte_lsp             To                   : 10.20.1.5
Adm State        : Up                   Oper State           : Up
-----------------------------------------------------------------------------
Path Name                        Type           Adm  Opr
-----------------------------------------------------------------------------
fully_loose                      Primary         Up   Up
=============================================================================

srlg-database

Syntax 
srlg-database [router-id ip-address] [interface ip-address]
Context 
show>router>mpls
Description 

This command displays MPLS SRLG database information.

Parameters 
router-id ip-address
Specifies a 32-bit integer uniquely identifying the router in the Autonomous System. By convention to ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses, represented as a 32-bit unsigned integer, if IPv4 is configured on the router. The router-id can be either the local one or some remote router.
interface ip-address
Specifies the IP address of the interface.

static-lsp

Syntax 
static-lsp [lsp-name]
static-lsp {transit | terminate}
static-lsp count
Context 
show>router>mpls
Description 

This command displays MPLS static LSP information.

Output 

MPLS Static LSP Output

Table 26 describes the MPLS static LSP output fields.

Table 26:  MPLS Static LSP Output Fields 

Label

Description  

Lsp Name

The name of the LSP used in the path up to 64 characters in length.

To

The system IP address of the egress router for the LSP.

Next Hop

The system IP address of the next hop in the LSP path.

In I/F

The ingress interface.

Out Label

The egress interface.

Out I/F

The egress interface.

Adm

Down — The path is administratively disabled.

Up — The path is administratively enabled.

Opr

Down — The path is operationally down.

Up — The path is operationally up.

LSPs

The total number of static LSPs.

Sample Output
A:ALA-12# show router mpls static-lsp 
===============================================================================
MPLS Static LSPs (Originating)
===============================================================================
Lsp Name          To              Next Hop        Out Label Out I/F   Adm  Opr  
-------------------------------------------------------------------------------
NYC_SJC_customer2 100.20.1.10     10.10.1.4       1020      1/1/1     Up   Up  
-------------------------------------------------------------------------------
LSPs : 1
===============================================================================
A:ALA-12# 
 
 
*A:SRU4>config>router>mpls# show router mpls static-lsp transit
===============================================================================
MPLS Static LSPs (Transit)
===============================================================================
In Label    In Port     Out Label   Out Port    Next Hop            Adm   Opr
-------------------------------------------------------------------------------
240         aps-1       440         1/1/10      10.22.11.3          Up    Up
241         aps-1       441         1/1/10      10.22.11.3          Up    Up
242         aps-1       442         1/1/10      10.22.11.3          Up    Up
243         aps-1       443         1/1/10      10.22.11.3          Up    Up
244         aps-1       444         1/1/10      10.22.11.3          Up    Up
245         aps-1       445         1/1/10      10.22.11.3          Up    Up
246         aps-1       446         1/1/10      10.22.11.3          Up    Up
247         aps-1       447         1/1/10      10.22.11.3          Up    Up
248         aps-1       448         1/1/10      10.22.11.3          Up    Up
249         aps-1       449         1/1/10      10.22.11.3          Up    Up
250         aps-1       450         1/1/10      10.22.11.3          Up    Up
251         aps-1       451         1/1/10      10.22.11.3          Up    Up
252         aps-1       452         1/1/10      10.22.11.3          Up    Up
253         aps-1       453         1/1/10      10.22.11.3          Up    Up
...
207         3/2/8       407         1/1/9       10.22.10.3          Up    Up
208         3/2/8       408         1/1/9       10.22.10.3          Up    Up
209         3/2/8       409         1/1/9       10.22.10.3          Up    Up
-------------------------------------------------------------------------------
LSPs : 256
===============================================================================
*A:SRU4>config>router>mpls#
 
A:ALA-12# show router mpls static-lsp terminate 
===============================================================================
MPLS Static LSPs (Terminate)
===============================================================================
In Label    In I/F      Out Label   Out I/F     Next Hop            Adm   Opr   
-------------------------------------------------------------------------------
1021        1/1/1       n/a         n/a         n/a                 Up    Up   
-------------------------------------------------------------------------------
LSPs : 1
===============================================================================
A:ALA-12# 

statistics-summary

Syntax 
statistics-summary
Context 
show>router>mpls>statistics-summary
Description 

This command displays the number of LSP statistics configured.

Output 

The following output is an example of MPLS statistics summary fields.

Sample Output
*A:SRU4>config>router>mpls# show router mpls statistics-summary
===============================================================================
Statistics Summary
===============================================================================
LSP egress statistics                  : 0
LSP ingress statistics                 : 0
===============================================================================
*A:SRU4>config>router>mpls#

status

Syntax 
status
Context 
show>router>mpls>mpls-tp
Description 

This command displays MPLS-TP system configuration information.

Output 

The following output is an example of MPLS status fields.

Sample Output
*A:mlstp-dutA# show router mpls mpls-tp status
===============================================================================
MPLS-TP Status
===============================================================================
Admin Status  : Up
Global ID     : 42                               Node ID       : 0.0.3.233
Tunnel Id Min : 1                                Tunnel Id Max : 4096
===============================================================================

tp-lsp

Syntax 
tp-lsp [lsp-name] [status {up | down}] [from ip-address | to ip-address] [detail]
tp-lsp [lsp-name] path [protecting | working] [detail]
tp-lsp [lsp-name] protection
Context 
show>router>mpls
Description 

This command displays TP LSP information.

Parameters 
lsp-name—
Specifies the LSP name up to 64 characters in length. ‘*’ is accepted as a wild card character.
path—
Displays LSP path information.
protection—
Displays LSP protection information.
up | down—
Specifies the state of the LSP.
Output 

The following output is an example of MPLS TP LSP fields.

Sample Output
*A:mlstp-dutA# show router mpls tp-lsp
path
protection
to <a.b.c.d>
<lsp-name>
 "lsp-32"  "lsp-33"  "lsp-34"  "lsp-35"  "lsp-36"  "lsp-37"  "lsp-38"  "lsp-39"
 "lsp-40"  "lsp-41"
status {up | down}
from <ip-address>
detail
 
*A:mlstp-dutA# show router mpls tp-lsp "lsp-
"lsp-32"  "lsp-33"  "lsp-34"  "lsp-35"  "lsp-36"  "lsp-37"  "lsp-38"  "lsp-39"
"lsp-40"  "lsp-41"
*A:mlstp-dutA# show router mpls tp-lsp "lsp-32"
 
===============================================================================
MPLS MPLS-TP LSPs (Originating)
===============================================================================
LSP Name                           To               Tun     Protect   Adm  Opr
                                                    Id      Path
-------------------------------------------------------------------------------
lsp-32                             0.0.3.234        32      No        Up   Up
-------------------------------------------------------------------------------
LSPs : 1
===============================================================================
*A:mlstp-dutA# show router mpls tp-lsp "lsp-32" detail
 
===============================================================================
MPLS MPLS-TP LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name    : lsp-32
LSP Type    : MplsTp                           LSP Tunnel ID  : 32
From Node Id: 0.0.3.233+                       To Node Id     : 0.0.3.234
Adm State   : Up                               Oper State     : Up
LSP Up Time : 0d 04:50:47                      LSP Down Time  : 0d 00:00:00
Transitions : 1                                Path Changes   : 2
DestGlobalId: 42                               DestTunnelNum  : 32
 
 
===============================================================================
*A:mlstp-dutA#  show router mpls tp-lsp path
 
===============================================================================
MPLS-TP LSP Path Information
===============================================================================
LSP Name      : lsp-32                           To            : 0.0.3.234
Admin State   : Up                               Oper State    : Up
 
-------------------------------------------------------------------------------
Path        NextHop           InLabel   OutLabel  Out I/F         Admin  Oper
-------------------------------------------------------------------------------
Working                       32        32        AtoB_1          Up     Down
Protect                       2080      2080      AtoC_1          Up     Up
===============================================================================
LSP Name      : lsp-33                           To            : 0.0.3.234
Admin State   : Up                               Oper State    : Up
 
-------------------------------------------------------------------------------
Path        NextHop           InLabel   OutLabel  Out I/F         Admin  Oper
-------------------------------------------------------------------------------
Working                       33        33        AtoB_1          Up     Down
Protect                       2082      2082      AtoC_1          Up     Up
===============================================================================
LSP Name      : lsp-34                           To            : 0.0.3.234
Admin State   : Up                               Oper State    : Up
 
-------------------------------------------------------------------------------
Path        NextHop           InLabel   OutLabel  Out I/F         Admin  Oper
-------------------------------------------------------------------------------
Working                       34        34        AtoB_1          Up     Down
Protect                       2084      2084      AtoC_1          Up     Up
===============================================================================
LSP Name      : lsp-35                           To            : 0.0.3.234
Admin State   : Up                               Oper State    : Up
 
-------------------------------------------------------------------------------
Path        NextHop           InLabel   OutLabel  Out I/F         Admin  Oper
-------------------------------------------------------------------------------
Working                       35        35        AtoB_1          Up     Down
Protect                       2086      2086      AtoC_1          Up     Up
===============================================================================
LSP Name      : lsp-36                           To            : 0.0.3.234
Admin State   : Up                               Oper State    : Up
 
-------------------------------------------------------------------------------
Path        NextHop           InLabel   OutLabel  Out I/F         Admin  Oper
-------------------------------------------------------------------------------
Working                       36        36        AtoB_1          Up     Down
Protect                       2088      2088      AtoC_1          Up     Up
===============================================================================
LSP Name      : lsp-37                           To            : 0.0.3.234
Admin State   : Up                               Oper State    : Up
 
-------------------------------------------------------------------------------
Path        NextHop           InLabel   OutLabel  Out I/F         Admin  Oper
-------------------------------------------------------------------------------
Working                       37        37        AtoB_1          Up     Down
Protect                       2090      2090      AtoC_1          Up     Up
===============================================================================
LSP Name      : lsp-38                           To            : 0.0.3.234
Admin State   : Up                               Oper State    : Up
 
-------------------------------------------------------------------------------
Path        NextHop           InLabel   OutLabel  Out I/F         Admin  Oper
-------------------------------------------------------------------------------
Working                       38        38        AtoB_1          Up     Down
Protect                       2092      2092      AtoC_1          Up     Up
===============================================================================
LSP Name      : lsp-39                           To            : 0.0.3.234
Admin State   : Up                               Oper State    : Up
 
-------------------------------------------------------------------------------
Path        NextHop           InLabel   OutLabel  Out I/F         Admin  Oper
-------------------------------------------------------------------------------
Working                       39        39        AtoB_1          Up     Down
Protect                       2094      2094      AtoC_1          Up     Up
===============================================================================
LSP Name      : lsp-40                           To            : 0.0.3.234
Admin State   : Up                               Oper State    : Up
 
-------------------------------------------------------------------------------
Path        NextHop           InLabel   OutLabel  Out I/F         Admin  Oper
-------------------------------------------------------------------------------
Working                       40        40        AtoB_1          Up     Down
Protect                       2096      2096      AtoC_1          Up     Up
===============================================================================
LSP Name      : lsp-41                           To            : 0.0.3.234
Admin State   : Up                               Oper State    : Up
 
-------------------------------------------------------------------------------
Path        NextHop           InLabel   OutLabel  Out I/F         Admin  Oper
-------------------------------------------------------------------------------
Working                       41        41        AtoB_1          Up     Down
Protect                       2098      2098      AtoC_1          Up     Up
 
*A:mlstp-dutA#  show router mpls tp-lsp "lsp-32" path working
 
===============================================================================
MPLS-TP LSP Working Path Information
    LSP: "lsp-32"
===============================================================================
LSP Name      : lsp-32                           To            : 0.0.3.234
Admin State   : Up                               Oper State    : Up
 
-------------------------------------------------------------------------------
Path        NextHop           InLabel   OutLabel  Out I/F         Admin  Oper
-------------------------------------------------------------------------------
Working                       32        32        AtoB_1          Up     Down
===============================================================================
*A:mlstp-dutA#  show router mpls tp-lsp "lsp-32" path protect
 
===============================================================================
MPLS-TP LSP Protect Path Information
    LSP: "lsp-32"
===============================================================================
LSP Name      : lsp-32                           To            : 0.0.3.234
Admin State   : Up                               Oper State    : Up
 
-------------------------------------------------------------------------------
Path        NextHop           InLabel   OutLabel  Out I/F         Admin  Oper
-------------------------------------------------------------------------------
Protect                       2080      2080      AtoC_1          Up     Up
===============================================================================
*A:mlstp-dutA#  show router mpls tp-lsp "lsp-32" path protect detail
 
===============================================================================
MPLS-TP LSP Protect Path Information
    LSP: "lsp-32" (Detail)
===============================================================================
LSP Name      : lsp-32                           To            : 0.0.3.234
Admin State   : Up                               Oper State    : Up
 
Protect path information
-------------------------------------------------------------------------------
Path Type     : Protect                          LSP Num       : 2
Path Admin    : Up                               Path Oper     : Up
Out Interface : AtoC_1                           Next Hop Addr : n/a
In Label      : 2080                             Out Label     : 2080
Path Up Time  : 0d 04:52:17                      Path Dn Time  : 0d 00:00:00
Active Path   : Yes                              Active Time   : 0d 00:52:56
 
MEP information
MEP State     : Up                               BFD           : cc
OAM Templ     : privatebed-oam-template          CC Status     : inService
                                                 CV Status     : unknown
Protect Templ : privatebed-protection-template   WTR Count Down: 0 seconds
RX PDU        : SF (1,1)                         TX PDU        : SF (1,1)
Defects       :
===============================================================================
*A:mlstp-dutA#  show router mpls tp-lsp "lsp-32" path working detail
 
===============================================================================
MPLS-TP LSP Working Path Information
    LSP: "lsp-32" (Detail)
===============================================================================
LSP Name      : lsp-32                           To            : 0.0.3.234
Admin State   : Up                               Oper State    : Up
 
Working path information
-------------------------------------------------------------------------------
Path Type     : Working                          LSP Num       : 1
Path Admin    : Up                               Path Oper     : Up
Out Interface : AtoB_1                           Next Hop Addr : n/a
In Label      : 32                               Out Label     : 32
Path Up Time  : 18d 22:39:53                     Path Dn Time  : 0d 00:00:00
Active Path   : Yes                              Active Time   : 18d 22:34:52
 
MEP information
MEP State     : Up                               BFD           : cc
OAM Templ     : privatebed-oam-template          BFD Status    : inService
Ingress I/F N*: 0                                Egress I/F Num: 0
AIS State     : AIS
===============================================================================
*A:mlstp-dutA#
 
 
*A:mlstp-dutA#  show router mpls tp-lsp protection
 
===============================================================================
MPLS-TP LSP Protection Information
Legend: W-Working, P-Protect,
===============================================================================
LSP Name                      Admin Oper  Path    Ingr/Egr      Act. Rx PDU
                              State State   State Label         Path Tx PDU
-------------------------------------------------------------------------------
lsp-32                        Up    Up    W Down      32/32     No   SF (1,1)
                                          P Up      2080/2080   Yes  SF (1,1)
lsp-33                        Up    Up    W Down      33/33     No   SF (1,1)
                                          P Up      2082/2082   Yes  SF (1,1)
lsp-34                        Up    Up    W Down      34/34     No   SF (1,1)
                                          P Up      2084/2084   Yes  SF (1,1)
lsp-35                        Up    Up    W Down      35/35     No   SF (1,1)
                                          P Up      2086/2086   Yes  SF (1,1)
lsp-36                        Up    Up    W Down      36/36     No   SF (1,1)
                                          P Up      2088/2088   Yes  SF (1,1)
lsp-37                        Up    Up    W Down      37/37     No   SF (1,1)
                                          P Up      2090/2090   Yes  SF (1,1)
lsp-38                        Up    Up    W Down      38/38     No   SF (1,1)
                                          P Up      2092/2092   Yes  SF (1,1)
lsp-39                        Up    Up    W Down      39/39     No   SF (1,1)
                                          P Up      2094/2094   Yes  SF (1,1)
lsp-40                        Up    Up    W Down      40/40     No   SF (1,1)
                                          P Up      2096/2096   Yes  SF (1,1)
lsp-41                        Up    Up    W Down      41/41     No   SF (1,1)
                                          P Up      2098/2098   Yes  SF (1,1)
-------------------------------------------------------------------------------
No. of MPLS-TP LSPs: 10
===============================================================================

2.16.2.2. Show MPLS-Labels Commands

label

Syntax 
label start-label [end-label | in-use | owner]
Context 
show>router>mpls-labels
Description 

Displays MPLS labels exchanged.

Parameters 
start-label
Specifies the label value assigned at the ingress router.
end-label
Specifies the label value assigned for the egress router.
in-use
Specifies the number of in-use labels displayed.
Output 

MPLS Label Output Fields

Table 27 describes MPLS label output fields.

Table 27:  MPLS Label Output Fields 

Label

Description

Label

Displays the value of the label being displayed.

Label Type

Specifies whether the label value is statically or dynamically assigned.

Label Owner

The label owner.

In-use labels in entire range

The total number of labels being used by RSVP.

Sample Output
*A:Atlanta 224>show>router>mpls-labels># label-range
============================================================================
Label Ranges
============================================================================
Label Type      Start Label End Label   Aging       Available   Total
----------------------------------------------------------------------------
Static          32          18431       -           18400       18400
Dynamic         18432       524287      0           505443      505856
    Seg-Route   200501      200900      -           0           400
============================================================================
 
*A:SRU4>config>router>mpls#    show router mpls label 202
=================================================================
MPLS Label 202
=================================================================
Label               Label Type          Label Owner
-----------------------------------------------------------------
202                 static-lsp          STATIC
-----------------------------------------------------------------
In-use labels in entire range                   : 5057
=================================================================
*A:SRU4>config>router>mpls#

label-range

Syntax 
label-range
Context 
show>router>mpls-labels
Description 

This command displays the MPLS label range.

Output 

MPLS Label Range Output

Table 28 describes the MPLS label range output fields.

Table 28:  MPLS Label Range Output Fields 

Label

Description

Label Type

Displays the information about static-lsp, static-svc, and dynamic label types.

Start Label

The label value assigned at the ingress router.

End Label

The label value assigned for the egress router.

Aging

The number of labels released from a service which are transitioning back to the label pool. Labels are aged 15 s.

Total Available

The number of label values available.

Sample Output
*A:Atlanta 224>show>router>mpls-labels># label-range
============================================================================
Label Ranges
============================================================================
Label Type      Start Label End Label   Aging       Available   Total
----------------------------------------------------------------------------
Static          32          18431       -           18400       18400
Dynamic         18432       524287      0           505443      505856
    Seg-Route   200501      200900      -           0           400
===========================================================================

summary

Syntax 
summary
Context 
show>router>mpls-labels
Description 

This command displays the MPLS label summary.

Output 

Table 29 describes MPLS label summary output fields and the following output is an example of MPLS label summary.

Sample Output
*A:cses-V23>show>router>mpls-labels># show router mpls-labels summary
===============================================================================
Mpls-Labels Summary
===============================================================================
Static Label Range             : 18400
Bgp Labels Hold Timer          : 30
Segment Routing Start Label    : 0
Segment Routing End Label      : 0
Reserved Label Block Name      :
        test reserved-label
===============================================================================
Table 29:  MPLS Label Summary Output Fields 

Label

Description 

Static Label Range

Displays the static label range.

Bgp Labels Hold Timer

Displays the BGP labels hold timer.

Segment Routing Start Label

Displays the segment routing start label.

Segment Routing End Label

Displays the segment routing end label.

Reserved Label Block Name

Displays the reserved label block name.

2.16.2.3. Show Router BFD session Commands

session

Syntax 
session {ipv4 | ipv6} detail [lag lag-id] lag-port port-id
session [lsp-ldp head [prefix ip-prefix/ip-prefix-length [src-ip ip-address]] [detail]]
session [lsp-ldp tail [prefix ip-prefix/ip-prefix-length [dst-ip ip-address]] [detail]]
session lsp-name lsp-name
session lsp-rsvp {head | tail}
session src ip-address/link-local address dest ip-address | link-local address detail lsp-rsvp {head | tail} tunnel-id tunnel-id lsp-id lsp-id
session mpls-tp
session lsp-name Lsp Name [link-type {cc-only | cc-cv}] detail
session p2mp-interface interface-name detail
session src ip-address/link-local address detail lsp-rsvp {head | tail} rsvp-session-name [256 chars max]
session [src ip-address/link-local address] [ipv4 | ipv6]
session src ip-address/link-local address dest ip-address | link-local address
session src ip-address/link-local address detail
session summary
session type type [ipv4 | ipv6]
Context 
show>router>bfd
Description 

This command display BFD session information.

Parameters 
ipv4 | ipv6—
Displays session information for IPv4 or IPv6.
dest ip-address | link-local address
Displays information about the specified destination IP address or link local address.
detail—
Displays detailed information.
dst-ip ip-address
When used with the lsp-ldp parameter, filters BFD session information by the destination IP address.
ip-prefix/ip-prefix-length—
Specifies an IP prefix for which to display BFD session information, and the length of the prefix.
Values—
ipv4-prefix — a.b.c.d
ipv4-prefix-length — 0 to 32
ipv6-prefix — x:x:x:x:x:x:x:x (eight 16-bit pieces)
                      x:x:x:x:x:x:d.d.d.d
                      x — 0 to FFFF (hexadecimal)
                      d — 0 to 255 (decimal)
ipv6-prefix-length — 0 to 128

 

lag lag-id
Displays information about the specified LAG ID.
lag-port port-id
Displays information about the specified LAG port ID.
lsp-id lsp-id
Displays information about the specified LSP.
lsp-ldp head—
Displays a count of head-end LSP BFD sessions, cpm-np sessions, central sessions, and IOM sessions.
lsp-ldp tail—
Displays a count of tail-end LSP BFD sessions, cpm-np sessions, central sessions, and IOM sessions.
lsp-name lsp-name
Displays information about the specified LSP name.
lsp-rsvp {head | tail}
Displays a summary of all head or tail RSVP LSP BFD sessions. The information in this show command should be the same as the show>router>bfd>session commands, but filtered for sessions associated with RSVP LSPs. The protocol field of the output should indicate lsp-rsvp.
p2mp-interface interface-name
Displays information about the specified P2MP interface
rsvp-session-name [256 chars max]
Displays a summary of all head or tail RSVP LSP BFD sessions. The information in this show command should be the same as the show>router>bfd>session commands, but filtered for sessions associated with RSVP LSPs. The protocol field of the output should indicate lsp-rsvp.
src ip-address/link-local address
Displays information about the specified source IPaddress or link local address.
src-ip ip-address
When used with the lsp-ldp parameter, filters BFD session information by the source IP address.
summary—
Displays summarized information.
tunnel-id tunnel-id
Displays information about the specified tunnel.
type type
Specifies the type.
Values—
iom, central, cpm-np

 

Output 

The following output shows an example of BFD session information.

Sample Output
A:A7# show router bfd session 
===============================================================================
Legend:
  Session Id = Interface Name | LSP Name | Prefix | RSVP Sess Name | Service Id
  wp = Working path   pp = Protecting path
===============================================================================
BFD Session
===============================================================================
Session Id                                        State      Tx Pkts    Rx Pkts
  Rem Addr/Info/SdpId:VcId                      Multipl     Tx Intvl   Rx Intvl
  Protocols                                        Type     LAG Port     LAG ID
-------------------------------------------------------------------------------
2001:db8:696a:6b6c:6d6e:6f70:7172:7374/128        Down   4111222334 3111222334   <<<
 LMB:  stub values
  N/A                                                19         1000       2000
  bgp                                           central          N/A        N/A
103.104.105.106/32                                 Init          N/A        N/A
  102.103.104.105                                    19         1000       2000
  rsvp mcIpsec bgpLsp                            cpm-np          N/A        N/A
RSVP_session_name_20__24__28__32                     Up   4111222336 3111222336
  2001:db8:6b6c:6d6e:6f70:7172:7374:7576             19         1000       2000
  mc-ring ospf3 ldpLsp                              iom          N/A        N/A
-------------------------------------------------------------------------------
No. of BFD sessions: 3
===============================================================================

2.16.2.4. Show RSVP Commands

interface

Syntax 
interface [ip-int-name | ip-address] statistics [detail]
Context 
show>router>rsvp
Description 

This command shows RSVP interfaces.

Parameters 
ip-int-name—
Specifies the network IP interface. An interface name cannot be in the form of an IP address. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.
ip-address—
Specifies the system or network interface IP address.
statistics—
Displays the RSVP interface name and counts of various RSVP packets sent and received on the interface.
detail
Displays detailed information.
Output 

RSVP Interface Output

Table 30 describes RSVP interface output fields.

Table 30:  RSVP Interface Output Fields 

Label

Description  

Interface

The name of the IP interface.

Total Sessions

The total number of RSVP sessions on this interface. This count includes sessions that are active as well as sessions that have been signaled but a response has not yet been received.

Active Sessions

The total number of active RSVP sessions on this interface.

Total BW (Mbps)

The amount of bandwidth in Mb/s available to be reserved for the RSVP protocol on the interface.

Resv BW (Mbps)

The amount of bandwidth in Mb/s reserved on this interface. A value of zero (0) indicates that no bandwidth is reserved.

Adm

Down — The RSVP interface is administratively disabled.

Up — The RSVP interface is administratively enabled.

Bfd

Yes — BFD is enabled on the RSVP interface.

No — BFD is disabled on the RSVP interface.

Opr

Down — The RSVP interface is operationally down.

Up — The RSVP interface is operationally up.

Port ID

Specifies the physical port bound to the interface.

Active Resvs

The total number of active RSVP sessions that have reserved bandwidth.

Subscription

Specifies the percentage of the link bandwidth that RSVP can use for reservation. When the value is zero (0), no new sessions are permitted on this interface.

Port Speed

Specifies the speed for the interface.

Unreserved BW

Specifies the amount of unreserved bandwidth.

Reserved BW

Specifies the amount of bandwidth in Mb/s reserved by the RSVP session on this interface. A value of zero (0) indicates that no bandwidth is reserved.

Total BW

Specifies the amount of bandwidth in Mb/s available to be reserved for the RSVP protocol on this interface.

Aggregate

Aggregate messages are used to pack multiple RSVP messages into a single packet to reduce the network overhead. When the value is true, RSVP negotiates with each neighbor and gets consensus before sending aggregate messages.

Hello Interval

Specifies the length of time (in s) between the hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network. When the value is zero (0), the sending of hello messages is disabled.

Refresh Time

Specifies the interval between the successive Path and Resv refresh messages. RSVP declares the session down after it misses ((keep-multiplier + 0.5) * 1.5 * refresh-time)) consecutive refresh messages.

Hello Timeouts

The total number of hello messages that timed out on this RSVP interface.

Neighbors

The IP address of the RSVP neighbor.

Sent

The total number of error free RSVP packets that have been transmitted on the RSVP interface.

Recd

The total number of error free RSVP packets received on the RSVP interface.

Total Packets

The total number of RSVP packets, including errors, received on the RSVP interface.

Bad Packets

The total number of RSVP packets with errors transmitted on the RSVP interface.

Paths

The total number of RSVP PATH messages received on the RSVP interface.

Path Errors

The total number of RSVP PATH ERROR messages transmitted on the RSVP interface.

Path Tears

The total number of RSVP PATH TEAR messages received on the RSVP interface.

Resvs

The total number of RSVP RESV messages received on the RSVP interface.

Resv Confirms

The total number of RSVP RESV CONFIRM messages received on the RSVP interface.

Resv Errors

Total RSVP RESV ERROR messages received on RSVP interface.

Resv Tears

Total RSVP RESV TEAR messages received on RSVP interface.

Refresh Summaries

Total RSVP RESV summary refresh messages received on interface.

Refresh Acks

Total RSVP RESV acknowledgement messages received when refresh reduction is enabled on the RSVP interface.

Bundle Packets

Total RSVP RESV bundled packets received on the RSVP interface.

Hellos

Total RSVP RESV HELLO REQ messages received on the interface.

DBw Multiplier

Displays the configured dark bandwidth multiplier.

DBw Up Threshold

Displays the configured dark bandwidth up threshold (per interface or inherited).

DBw Down Threshold

Displays the configured dark bandwidth down threshold (per interface or inherited).

DBw Sample Index

Displays the index of the dark bandwidth current sample.

DBw Last Sample

Displays the latest sampled value of the dark bandwidth.

Latest Cal DBw

Displays the latest value of the calculated dark bandwidth (calculated over average interval = sample-interval × sample-multiplier). The value indicated here has already been multiplied by the dbw-multiplier.

Advertised MRLB

Displays the value of the latest advertised Maximum Reservable Link Bandwidth.

Sample Output
*A:Dut-A>config>router>mpls>lsp$ /show router rsvp interface "ip-10.10.1.1" detail 
 
=======================================================================
RSVP Interface (Detailed) : ip-10.10.1.1
=======================================================================
-----------------------------------------------------------------------
Interface : ip-10.10.1.1
-----------------------------------------------------------------------
Interface         : ip-10.10.1.1
Port ID           : 1/1/1               
Admin State       : Up                  Oper State        : Up
Active Sessions   : 1                   Active Resvs      : 0
Total Sessions    : 1                   
Subscription      : 100 %               Port Speed        : 100 Mbps
Total BW          : 100 Mbps            Aggregate         : Dsabl
Hello Interval    : n/a                 Hello Timeouts    : n/a
Authentication    : Disabled            
Auth Rx Seq Num   : n/a                 Auth Key Id       : n/a
Auth Tx Seq Num   : n/a                 Auth Win Size     : n/a
Refresh Reduc.    : Disabled            Reliable Deli.    : Disabled
Bfd Enabled       : n/a                 Graceful Shut.    : Disabled
ImplicitNullLabel : Disabled*           GR helper         : n/a
 
Percent Link Bandwidth for Class Types*
Link Bw CT0       : 100                 Link Bw CT4       : 0
Link Bw CT1       : 0                   Link Bw CT5       : 0
Link Bw CT2       : 0                   Link Bw CT6       : 0
Link Bw CT3       : 0                   Link Bw CT7       : 0
 
 
Bandwidth Constraints for Class Types (Kbps)
BC0               : 100000              BC4               : 0
BC1               : 0                   BC5               : 0
BC2               : 0                   BC6               : 0
BC3               : 0                   BC7               : 0
 
Bandwidth for TE Class Types (Kbps)
TE0->  Resv. Bw   : 0                   Unresv. Bw        : 100000
TE1->  Resv. Bw   : 0                   Unresv. Bw        : 100000
TE2->  Resv. Bw   : 0                   Unresv. Bw        : 100000
TE3->  Resv. Bw   : 0                   Unresv. Bw        : 100000
TE4->  Resv. Bw   : 0                   Unresv. Bw        : 100000
TE5->  Resv. Bw   : 0                   Unresv. Bw        : 100000
TE6->  Resv. Bw   : 0                   Unresv. Bw        : 100000
TE7->  Resv. Bw   : 0                   Unresv. Bw        : 100000
 
IGP Update
Up Thresholds(%)   : 0 15 30 45 60 75 80 85 90 95 96 97 98 99 100  *
Down Thresholds(%) : 100 99 98 97 96 95 90 85 80 75 60 45 30 15 0  *
IGP Update Pending : No
Next Update        : N/A
Neighbors      : 10.20.1.2          
 
Dark Bandwidth
DBw Multiplier     : 100 *
DBw Up Threshold   : 0 % *
DBw Down Threshold : 0 % *
DBw Sample Index  : 0                   DBw Last Sample   : 0 Mbps
Latest Cal DBw    : 0 Mbps              Advertised MRLB   : 1000 Mbps
Neighbors      : 12.1.1.2 
* indicates inherited values
=======================================================================
*A:Dut-A>config>router>mpls>lsp$
 
 
 
*A:SRU4>show>router>rsvp# interface
===============================================================================
RSVP Interfaces
===============================================================================
Interface                        Total    Active    Total BW  Resv BW   Adm Opr
                                 Sessions Sessions  (Mbps)    (Mbps)
-------------------------------------------------------------------------------
system                           -        -         -         -         Up  Up
aps-1                            0        0         6012      0         Up  Up
aps-2                            0        0         6010      0         Up  Up
aps-3                            0        0         6010      0         Up  Up
sr4-1                            0        0         6010      0         Up  Up
ess-7-1                          9        9         100       0         Up  Up
ess-7-2                          7        7         100       0         Up  Up
ess-7-3                          4        4         100       0         Up  Up
ess-7-4                          0        0         800       0         Up  Up
ess-7-5                          0        0         800       0         Up  Up
ess-7-6                          0        0         800       0         Up  Up
hubA                             0        0         100       0         Up  Up
germ-1                           0        0         1000      0         Up  Up
src-1.1                          3        3         100       0         Up  Up
src-1.2                          2        2         100       0         Up  Up
src-1.3                          3        3         100       0         Up  Up
src-1.4                          5        5         100       0         Up  Up
...
g7600                            0        0         1000      0         Up  Up
m160                             481      481       1000      82        Up  Up
-------------------------------------------------------------------------------
Interfaces : 35
===============================================================================
*A:SRU4>show>router>rsvp#
 
*A:SRU4>show>router>rsvp# interface statistics
===============================================================================
RSVP Interface (statistics)
===============================================================================
-------------------------------------------------------------------------------
Interface system
-------------------------------------------------------------------------------
Interface                   : Up
Total Packets        (Sent) : 0                    (Recd.): 0
Bad Packets          (Sent) : 0                    (Recd.): 0
Paths                (Sent) : 0                    (Recd.): 0
Path Errors          (Sent) : 0                    (Recd.): 0
Path Tears           (Sent) : 0                    (Recd.): 0
Resvs                (Sent) : 0                    (Recd.): 0
Resv Confirms        (Sent) : 0                    (Recd.): 0
Resv Errors          (Sent) : 0                    (Recd.): 0
Resv Tears           (Sent) : 0                    (Recd.): 0
Refresh Summaries    (Sent) : 0                    (Recd.): 0
Refresh Acks         (Sent) : 0                    (Recd.): 0
Bundle Packets       (Sent) : 0                    (Recd.): 0
Hellos               (Sent) : 0                    (Recd.): 0
Auth Errors          (Sent) : 0                    (Recd.): 0
-------------------------------------------------------------------------------
...
-------------------------------------------------------------------------------
Interface m160
-------------------------------------------------------------------------------
Interface                   : Up
Total Packets        (Sent) : 883643               (Recd.): 3052503
Bad Packets          (Sent) : 0                    (Recd.): 0
Paths                (Sent) : 592153               (Recd.): 373610
Path Errors          (Sent) : 464                  (Recd.): 30716
Path Tears           (Sent) : 29563                (Recd.): 3480
Resvs                (Sent) : 93970                (Recd.): 2518660
Resv Confirms        (Sent) : 0                    (Recd.): 0
Resv Errors          (Sent) : 136815               (Recd.): 54115
Resv Tears           (Sent) : 13338                (Recd.): 71922
Refresh Summaries    (Sent) : 0                    (Recd.): 0
Refresh Acks         (Sent) : 0                    (Recd.): 0
Bundle Packets       (Sent) : 0                    (Recd.): 0
Hellos               (Sent) : 17340                (Recd.): 0
Auth Errors          (Sent) : 0                    (Recd.): 0
===============================================================================
*A:SRU4>show>router>rsvp#
 
 
*A:SRU4>show>router>rsvp# interface "sr4-1" statistics
===============================================================================
RSVP Interface : sr4-1 (statistics)
===============================================================================
-------------------------------------------------------------------------------
Interface sr4-1
-------------------------------------------------------------------------------
Interface                   : Up
Total Packets        (Sent) : 33100                (Recd.): 20405
Bad Packets          (Sent) : 0                    (Recd.): 0
Paths                (Sent) : 0                    (Recd.): 1833
Path Errors          (Sent) : 1783                 (Recd.): 9
Path Tears           (Sent) : 0                    (Recd.): 1157
Resvs                (Sent) : 76                   (Recd.): 0
Resv Confirms        (Sent) : 0                    (Recd.): 0
Resv Errors          (Sent) : 0                    (Recd.): 0
Resv Tears           (Sent) : 1                    (Recd.): 0
Refresh Summaries    (Sent) : 4                    (Recd.): 33
Refresh Acks         (Sent) : 1520                 (Recd.): 4
Bundle Packets       (Sent) : 0                    (Recd.): 0
Hellos               (Sent) : 29716                (Recd.): 17369
Auth Errors          (Sent) : 0                    (Recd.): 0
===============================================================================
*A:SRU4>show>router>rsvp#
 
*A:SRU4>show>router>rsvp#  interface detail
===============================================================================
RSVP Interfaces (Detailed)
===============================================================================
-------------------------------------------------------------------------------
Interface : system
-------------------------------------------------------------------------------
Interface         : system
Port ID           : system
Admin State       : Up                  Oper State        : Up
Active Sessions   : 0                   Active Resvs      : 0
Total Sessions    : 0
Subscription      : 100 %               Port Speed        : 0 Mbps
Total BW          : 0 Mbps              Aggregate         : Dsabl
Hello Interval    : 3000 ms             Hello Timeouts    : 0
Authentication    : Disabled
Auth Rx Seq Num   : n/a                 Auth Key Id       : n/a
Auth Tx Seq Num   : n/a                 Auth Win Size     : n/a
Refresh Reduc.    : Enabled             Reliable Deli.    : Disabled
Bfd Enabled       : No                  Graceful Shut.    : Disabled
ImplicitNullLabel : Disabled*
 
Percent Link Bandwidth for Class Types*
Link Bw CT0       : 100                 Link Bw CT4       : 0
Link Bw CT1       : 0                   Link Bw CT5       : 0
Link Bw CT2       : 0                   Link Bw CT6       : 0
Link Bw CT3       : 0                   Link Bw CT7       : 0
 
Bandwidth Constraints for Class Types (Kbps)
BC0               : 0                   BC4               : 0
BC1               : 0                   BC5               : 0
BC2               : 0                   BC6               : 0
BC3               : 0                   BC7               : 0
 
Bandwidth for TE Class Types (Kbps)
TE0->  Resv. Bw   : 0                   Unresv. Bw        : 0
TE1->  Resv. Bw   : 0                   Unresv. Bw        : 0
TE2->  Resv. Bw   : 0                   Unresv. Bw        : 0
TE3->  Resv. Bw   : 0                   Unresv. Bw        : 0
TE4->  Resv. Bw   : 0                   Unresv. Bw        : 0
TE5->  Resv. Bw   : 0                   Unresv. Bw        : 0
TE6->  Resv. Bw   : 0                   Unresv. Bw        : 0
TE7->  Resv. Bw   : 0                   Unresv. Bw        : 0
 
IGP Update
Up Thresholds(%)   : 0 15 30 45 60 75 80 85 90 95 96 97 98 99 100  *
Down Thresholds(%) : 100 99 98 97 96 95 90 85 80 75 60 45 30 15 0  *
IGP Update Pending : No
Next Update        : N/A
No Neighbors.
-------------------------------------------------------------------------------
Interface : m160
-------------------------------------------------------------------------------
Interface         : m160
Port ID           : 3/2/1
Admin State       : Up                  Oper State        : Up
Active Sessions   : 218                 Active Resvs      : 0
Total Sessions    : 517
Subscription      : 1000 %              Port Speed        : 100 Mbps
Total BW          : 1000 Mbps           Aggregate         : Dsabl
Hello Interval    : 3000 ms             Hello Timeouts    : 0
Authentication    : Disabled
Auth Rx Seq Num   : n/a                 Auth Key Id       : n/a
Auth Tx Seq Num   : n/a                 Auth Win Size     : n/a
Refresh Reduc.    : Enabled             Reliable Deli.    : Disabled
Bfd Enabled       : No                  Graceful Shut.    : Disabled
ImplicitNullLabel : Disabled*
 
Percent Link Bandwidth for Class Types*
Link Bw CT0       : 100                 Link Bw CT4       : 0
Link Bw CT1       : 0                   Link Bw CT5       : 0
Link Bw CT2       : 0                   Link Bw CT6       : 0
Link Bw CT3       : 0                   Link Bw CT7       : 0
 
Bandwidth Constraints for Class Types (Kbps)
BC0               : 1000000             BC4               : 0
BC1               : 0                   BC5               : 0
BC2               : 0                   BC6               : 0
BC3               : 0                   BC7               : 0
 
Bandwidth for TE Class Types (Kbps)
TE0->  Resv. Bw   : 0                   Unresv. Bw        : 1000000
TE1->  Resv. Bw   : 0                   Unresv. Bw        : 1000000
TE2->  Resv. Bw   : 0                   Unresv. Bw        : 1000000
TE3->  Resv. Bw   : 0                   Unresv. Bw        : 1000000
TE4->  Resv. Bw   : 0                   Unresv. Bw        : 1000000
TE5->  Resv. Bw   : 0                   Unresv. Bw        : 1000000
TE6->  Resv. Bw   : 0                   Unresv. Bw        : 1000000
TE7->  Resv. Bw   : 0                   Unresv. Bw        : 1000000
 
IGP Update
Up Thresholds(%)   : 0 15 30 45 60 75 80 85 90 95 96 97 98 99 100  *
Down Thresholds(%) : 100 99 98 97 96 95 90 85 80 75 60 45 30 15 0  *
IGP Update Pending : No
Next Update        : N/A
Neighbors      : 10.100.30.20
* indicates inherited values
===============================================================================
*A:SRU4>show>router>rsvp#

neighbor

Syntax 
neighbor [ip-address] [detail]
Context 
show>router>rsvp
Description 

This command shows neighbor information.

Parameters 
ip-address—
Displays RSVP information about the specified IP address.
detail
Displays detailed information.
Output 

The following output is an example of RSVP neighbor fields.

Sample Output
*A:Dut-A>config>router>mpls>lsp$ /show router rsvp neighbor 
=======================================================================
RSVP Neighbors
=======================================================================
Legend :  
    LR - Local Refresh Reduction          RR - Remote Refresh Reduction
    LD - Local Reliable Delivery          RM - Remote Node supports Message ID
    LG - Local Graceful Restart           RG - Remote Graceful Restart
=======================================================================
Neighbor        Interface                        Hello  Last Oper     Flags
                                                        Change
=======================================================================
10.20.1.2       ip-10.10.1.1                     N/A  0d 00:00:44   
10.20.1.3       ip-10.10.2.1                     N/A  0d 00:00:44   
-----------------------------------------------------------------------
Neighbors : 2
-----------------------------------------------------------------------
*A:Dut-A>config>router>mpls>lsp$
 
 
*A:SR1# show router rsvp neighbor detail
===============================================================================
RSVP Neighbors (Detailed)
===============================================================================
Legend :
    LR - Local Refresh Reduction          RR - Remote Refresh Reduction
    LD - Local Reliable Delivery          RM - Remote Node supports Message ID
    LG - Local Graceful Restart           RG - Remote Graceful Restart
===============================================================================
-------------------------------------------------------------------------------
Neighbor : 30.30.30.2
-------------------------------------------------------------------------------
Interface          : int_SR1_SR3        Hello State        : Up
Last Oper Change   : 0d 00:01:02        Flags              :
Source Instance    : 0x6c8b7            Dst. Instance      : 0x530f8e0
Hello Refresh Time : 2 secs             Hello Timeout Time : 8 secs
Hello Timeout Cnt  : 0                  Inst. Mismatch Cnt : 0
Srefresh Time Rem. : 0 secs             Epoch Num Rx       : 0
Max Msg Id Rx      : 0                  Out of order Msgs  : 0
Retransmitted Msgs : 0                  GR Helper          : Disabled
GR Proc Invoked Cnt: 0                  GR Helper State    : None
GR Helper Time Rem : N/A                GR Nbr Restart Cap : N/A
GR Nbr Restart Time: N/A                GR Nbr Recvry Time : N/A
==============================================================================
 
*B:edge13# show router rsvp neighbor 
========================================================================
RSVP Neighbors
========================================================================
Legend :  
    LR - Local Refresh Reduction          RR - Remote Refresh Reduction
    LD - Local Reliable Delivery          RM - Remote Node supports Message ID
    LG - Local Graceful Restart            RG - Remote Graceful Restart
========================================================================
Neighbor        Interface               Hello  Last Oper     Flags Change
========================================================================
10.11.101.2     e13c2_1                 Up   1d 00:52:56   LR RR LD RM
                                                                        
LG RG
10.11.102.2     e13c2_2                 Up   1d 00:52:56   LR RR LD RM  
10.11.103.3     e13s1_1                 Up   1d 00:52:54   LR RR LD RM
                                                                        
LG 
10.11.104.3     e13s1_2                 Up   1d 00:52:56   
10.11.105.4     e13s2_1                 Up   1d 00:52:56   
10.11.106.4     e13s2_2                 Up   1d 00:52:56   
------------------------------------------------------------------------
Neighbors : 6

session

Syntax 
session [session-type] [from ip-address [to ip-address] [lsp-name session-name] [status {up | down}] [detail] [interface ip-int-name]
Context 
show>router>rsvp
Description 

This command shows RSVP session information.

Parameters 
session-type—
Specifies the session type.
Values—
originate, transit, terminate, detour, detour-transit, detour-terminate, bypass-tunnel

 

from ip-address—
Specifies the IP address of the originating router.
to ip-address—
Specifies the IP address of the egress router.
session-name —
Specifies the name, up to 160 characters in length, of the LSP used in the path. “*” can be used as a wildcard character.
status up
Specifies to display a session that is operationally up.
status down
Specifies to display a session that is operationally down.
detail
Displays detailed information.
ip-int-name
Specifies the name of an existing MPLS interface.

If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.

The interface option filters the display to include all RSVP sessions that use this interface name as “In Interface” or as “Out Interface”.

Output 

RSVP Session Output

Table 31 describes RSVP session output fields.

Table 31:  RSVP Session Output Fields 

Label

Description 

From

The IP address of the originating router.

To

The IP address of the egress router.

Tunnel ID

The IP address of the tunnel’s ingress node supporting this RSVP session.

LSP ID

The ID assigned by the agent to this RSVP session.

Name

The administrative name assigned to the RSVP session by the agent.

State

Down — The operational state of this RSVP session is down.

Up — The operational state of this RSVP session is up.

Sample Output
*A:SRU4>show>router>rsvp#   session
===============================================================================
RSVP Sessions
===============================================================================
From            To              Tunnel LSP   Name                         State
                                ID     ID
-------------------------------------------------------------------------------
10.30.1.5      10.30.1.4       18     27648 b4-1::b4-1                   Up
10.30.1.5      10.30.1.4       1      37902 gsr::gsr                     Up
10.30.1.5      10.20.1.22      11     53760 to_10_20_1_22_cspf::to_10_2* Up
10.30.1.4      10.20.1.20      146    17920 to_10_20_1_20_cspf_3::to_10* Up
10.30.1.4      10.20.1.20      145    34816 to_10_20_1_20_cspf_2::to_10* Up
10.30.1.4      10.20.1.20      147    45056 to_10_20_1_20_cspf_4::to_10* Up
10.30.1.4      10.20.1.20      148    6656  to_10_20_1_20_cspf_5::to_10* Up
10.30.1.4      10.20.1.20      149    58880 to_10_20_1_20_cspf_6::to_10* Up
10.30.1.4      10.20.1.20      150    13312 to_10_20_1_20_cspf_7::to_10* Up
10.30.1.4      10.20.1.20      152    40448 to_10_20_1_20_cspf_9::to_10* Up
10.30.1.4      10.20.1.20      154    27648 to_10_20_1_20_cspf_11::to_1* Up
10.30.1.4      10.20.1.20      155    12288 to_10_20_1_20_cspf_12::to_1* Up
10.30.1.4      10.20.1.20      151    46080 to_10_20_1_20_cspf_8::to_10* Up
10.30.1.4      10.20.1.20      153    512   to_10_20_1_20_cspf_10::to_1* Up
10.30.1.4      10.20.1.22      164    62464 to_10_20_1_22_cspf_2::to_10* Up
10.30.1.4      10.20.1.20      156    37888 to_10_20_1_20_cspf_13::to_1* Up
10.30.1.4      10.20.1.20      157    24064 to_10_20_1_20_cspf_14::to_1* Up
10.30.1.4      10.20.1.20      158    19968 to_10_20_1_20_cspf_15::to_1* Up
10.30.1.4      10.20.1.20      161    59904 to_10_20_1_20_cspf_18::to_1* Up
...
10.30.1.3      10.30.1.4       54     23088 to_10_30_1_4_cspf_4::to_11*  Up
-------------------------------------------------------------------------------
Sessions : 1976
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:SRU4>show>router>rsvp#
 
 
A:ALA-12# show router rsvp session lsp-name A_C_2::A_C_2 status up
===============================================================================
RSVP Sessions
===============================================================================
From            To              Tunnel LSP   Name                         State
                                ID     ID
-------------------------------------------------------------------------------
10.20.1.1       10.20.1.3       2      40    A_C_2::A_C_2                 Up
-------------------------------------------------------------------------------
Sessions : 1
===============================================================================
A:ALA-12#
 
 
A:Phoenix 199# show router rsvp session detail
===============================================================================
RSVP Sessions (Detailed)
===============================================================================
-------------------------------------------------------------------------------
LSP : From Reno to Atlanta RSVP-TE::primary_empty
-------------------------------------------------------------------------------
From            : 192.168.48.194         To             : 192.168.48.224
Tunnel ID       : 4                     LSP ID         : 26682
Style           : SE                    State          : Up
Session Type    : Transit
In Interface    : 1/1/1                 Out Interface  : 1/1/7
In IF Name      : toSim194
Out IF Name     : toSim184
In Label        : 262126                Out Label      : 262128
Previous Hop    : 10.202.5.194          Next Hop       : 10.0.13.184
SetupPriority   : 7                     Hold Priority  : 0
Class Type      : 0
SubGrpOrig ID   : 0                     SubGrpOrig Addr:
P2MP ID         : 0
FrrAvailType    : Facility
FrrBypassLspName: bypass-link10.0.13.184-61452
FrrSrlgStrict   : N/A                   SrlgDisjoint   : N/A
Path Recd       : 22859                 Path Sent      : 22813
Resv Recd       : 22891                 Resv Sent      : 22848
Summary msgs    :
SPath Recd      : 0                     SPath Sent     : 0
SResv Recd      : 0                     SResv Sent     : 0
LSP Attr Flags  : N/A
-------------------------------------------------------------------------------
LSP : From Reno to Atlanta RSVP-TE::secondary_empty
-------------------------------------------------------------------------------
From            : 192.168.48.194        To             : 192.168.48.224
Tunnel ID       : 4                     LSP ID         : 26684
Style           : SE                    State          : Up
Session Type    : Transit
In Interface    : 1/1/2                 Out Interface  : 1/1/7
In IF Name      : toSim219
Out IF Name     : toSim184
In Label        : 262130                Out Label      : 262132
Previous Hop    : 10.202.1.219          Next Hop       : 10.0.13.184
SetupPriority   : 7                     Hold Priority  : 0
Class Type      : 0
SubGrpOrig ID   : 0                     SubGrpOrig Addr:
P2MP ID         : 0
FrrAvailType    : N/A
FrrSrlgStrict   : N/A                   SrlgDisjoint   : N/A
Path Recd       : 22762                 Path Sent      : 24117
Resv Recd       : 22870                 Resv Sent      : 22781
Summary msgs    :
SPath Recd      : 0                     SPath Sent     : 0
SResv Recd      : 0                     SResv Sent     : 0
LSP Attr Flags  : N/A
-------------------------------------------------------------------------------
LSP : bypass-link10.202.5.199-61877
-------------------------------------------------------------------------------
From            : 192.168.48.194        To             : 10.202.1.199
Tunnel ID       : 61877                 LSP ID         : 16
Style           : FF                    State          : Up
Session Type    : Terminate
In Interface    : 1/1/2                 Out Interface  : n/a
In IF Name      : toSim219
Out IF Name     : n/a
In Label        : 262125                Out Label      : n/a
Previous Hop    : 10.202.1.219          Next Hop       : n/a
SetupPriority   : 7                     Hold Priority  : 0
Class Type      : 0
SubGrpOrig ID   : 0                     SubGrpOrig Addr:
P2MP ID         : 0
FrrAvailType    : N/A
FrrSrlgStrict   : N/A                   SrlgDisjoint   : N/A
Path Recd       : 22901                 Path Sent      : 0
Resv Recd       : 0                     Resv Sent      : 22749
Summary msgs    :
SPath Recd      : 0                     SPath Sent     : 0
SResv Recd      : 0                     SResv Sent     : 0
LSP Attr Flags  : N/A
-------------------------------------------------------------------------------
LSP : bypass-link10.0.13.184-61452
-------------------------------------------------------------------------------
From            : 192.168.48.199        To             : 10.0.3.184
Tunnel ID       : 61452                 LSP ID         : 24
Style           : FF                    State          : Up
Session Type    : Bypass Tunnel
In Interface    : n/a                   Out Interface  : 1/1/3
In IF Name      : n/a
Out IF Name     : toSim185
In Label        : n/a                   Out Label      : 262126
Previous Hop    : n/a                   Next Hop       : 10.0.5.185
SetupPriority   : 7                     Hold Priority  : 0
Class Type      : 0
SubGrpOrig ID   : 0                     SubGrpOrig Addr:
P2MP ID         : 0
FrrAvailType    : N/A
FrrSrlgStrict   : N/A                   SrlgDisjoint   : N/A
Path Recd       : 0                     Path Sent      : 23423
Resv Recd       : 22912                 Resv Sent      : 0
Summary msgs    :
SPath Recd      : 0                     SPath Sent     : 0
SResv Recd      : 0                     SResv Sent     : 0
LSP Attr Flags  : N/A
===============================================================================
A:Phoenix 199#
 
 
A:Phoenix 199# show router rsvp session interface toSim219 detail
===============================================================================
RSVP Sessions (Detailed)
===============================================================================
-------------------------------------------------------------------------------
LSP : From Reno to Atlanta RSVP-TE::secondary_empty
-------------------------------------------------------------------------------
From            : 192.168.48.194        To             : 192.168.48.224
Tunnel ID       : 4                     LSP ID         : 26684
Style           : SE                    State          : Up
Session Type    : Transit
In Interface    : 1/1/2                 Out Interface  : 1/1/7
In IF Name      : toSim219
Out IF Name     : toSim184
In Label        : 262130                Out Label      : 262132
Previous Hop    : 10.202.1.219          Next Hop       : 10.0.13.184
SetupPriority   : 7                     Hold Priority  : 0
Class Type      : 0
SubGrpOrig ID   : 0                     SubGrpOrig Addr:
P2MP ID         : 0
FrrAvailType    : N/A
FrrSrlgStrict   : N/A                   SrlgDisjoint   : N/A
Path Recd       : 22768                 Path Sent      : 24124
Resv Recd       : 22876                 Resv Sent      : 22789
Summary msgs    :
SPath Recd      : 0                     SPath Sent     : 0
SResv Recd      : 0                     SResv Sent     : 0
LSP Attr Flags  : N/A
-------------------------------------------------------------------------------
LSP : bypass-link10.202.5.199-61877
-------------------------------------------------------------------------------
From            : 192.168.48.194        To             : 10.202.1.199
Tunnel ID       : 61877                 LSP ID         : 16
Style           : FF                    State          : Up
Session Type    : Terminate
In Interface    : 1/1/2                 Out Interface  : n/a
In IF Name      : toSim219
Out IF Name     : n/a
In Label        : 262125                Out Label      : n/a
Previous Hop    : 10.202.1.219          Next Hop       : n/a
SetupPriority   : 7                     Hold Priority  : 0
Class Type      : 0
SubGrpOrig ID   : 0                     SubGrpOrig Addr:
P2MP ID         : 0
FrrAvailType    : N/A
FrrSrlgStrict   : N/A                   SrlgDisjoint   : N/A
Path Recd       : 22906                 Path Sent      : 0
Resv Recd       : 0                     Resv Sent      : 22756
Summary msgs    :
SPath Recd      : 0                     SPath Sent     : 0
SResv Recd      : 0                     SResv Sent     : 0
LSP Attr Flags  : N/A
===============================================================================
 
 
*A:Dut-C# show router mpls lsp transit detail 
==============================================================================
MPLS LSPs (Transit) (Detail)
------------------------------------------------------------------------------
LSP tof1::sec2
------------------------------------------------------------------------------
From                 : 10.20.1.2             To            : 10.20.1.4         
State                : Up                                                      
SetupPriority        : 5                     Hold Priority : 5                 
Class Type           : 5                                                       
In Interface         : lag-1:0               In Label      : 131068            
Out Interface        : 2/1/2                 Out Label     : 131068            
Previous Hop         : 10.10.12.2            Next Hop      : 10.10.11.4        
Reserved BW          : 1000 Kbps                                               
==============================================================================
*A:Dut-C# 
 
 
*A:Dut-B# show router rsvp session detour-terminate detail 
==============================================================================
RSVP Sessions (Detailed)
==============================================================================
LSP : tof878::1_detour
------------------------------------------------------------------------------
From           : 10.20.1.2              To             : 10.20.1.4             
Tunnel ID      : 878                    LSP ID         : 14929                 
Style          : SE                     State          : Up                    
Session Type   : Terminate (Detour)                                            
In Interface   : lag-1:0                Out Interface  : 1/1/2:8               
In Label       : 131069                 Out Label      : 127951                
Previous Hop   : 10.10.12.3             Next Hop       : 10.10.108.4           
SetupPriority  : 4                      Hold Priority  : 4                     
Class Type     : 5                                                             
SugGrpOrig ID  : 0                      SubGrpOrig Addr: 0.0.0.0               
P2MP ID        : 0                                                             
 
Path Recd      : 128                    Path Sent      : 0                     
Resv Recd      : 125                    Resv Sent      : 124                   
 
Summary messages:
SPath Recd     : 0                      SPath Sent     : 0                     
SResv Recd     : 0                      SResv Sent     : 0                     
==============================================================================
*A:Dut-B# 
 
*A:Dut-B# show router rsvp session bypass-tunnel detail 
==============================================================================
RSVP Sessions (Detailed)
==============================================================================
LSP : bypass-link10.10.108.4
------------------------------------------------------------------------------
From           : 10.20.1.2              To             : 10.10.109.4           
Tunnel ID      : 4003                   LSP ID         : 6                     
Style          : FF                     State          : Up                    
Session Type   : Bypass Tunnel                                                 
In Interface   : n/a                    Out Interface  : 1/1/2:9               
In Label       : n/a                    Out Label      : 124069                
Previous Hop   : n/a                    Next Hop       : 10.10.109.4           
SetupPriority  : 7                      Hold Priority  : 0                     
Class Type     : 0                                                             
SugGrpOrig ID  : 0                      SubGrpOrig Addr: 0.0.0.0               
P2MP ID        : 0                                                             
 
Path Recd      : 0                      Path Sent      : 3                     
Resv Recd      : 4                      Resv Sent      : 0                     
 
Summary messages:
SPath Recd     : 0                      SPath Sent     : 0                     
SResv Recd     : 0                      SResv Sent     : 0                     
==============================================================================
*A:Dut-B# 
 
 
*A:Dut-B# show router rsvp session detour detail 
==============================================================================
RSVP Sessions (Detailed)
------------------------------------------------------------------------------
LSP : tof919::1_detour
------------------------------------------------------------------------------
From           : 10.20.1.2              To             : 10.20.1.4             
Tunnel ID      : 919                    LSP ID         : 15441                 
Style          : SE                     State          : Up                    
Session Type   : Originate (Detour)                                            
In Interface   : n/a                    Out Interface  : 1/1/2:1               
In Label       : n/a                    Out Label      : 129865                
Previous Hop   : n/a                    Next Hop       : 10.10.101.4           
SetupPriority  : 4                      Hold Priority  : 4                     
Class Type     : 5                                                             
SugGrpOrig ID  : 0                      SubGrpOrig Addr: 0.0.0.0               
P2MP ID        : 0                                                             
 
Path Recd      : 0                      Path Sent      : 106                   
Resv Recd      : 113                    Resv Sent      : 0                     
 
Summary messages:
SPath Recd     : 0                      SPath Sent     : 0                     
SResv Recd     : 0                      SResv Sent     : 0                     
==============================================================================
*A:Dut-B#
 
 
*A:Dut-B# show router rsvp session detour-transit detail 
==============================================================================
RSVP Sessions (Detailed)
------------------------------------------------------------------------------
LSP : tof919::1_detour
------------------------------------------------------------------------------
From           : 10.20.1.2              To             : 10.20.1.4             
Tunnel ID      : 919                    LSP ID         : 15441                 
Style          : SE                     State          : Up                    
Session Type   : Transit (Detour)                                              
In Interface   : lag-1:0                Out Interface  : 1/1/2:6               
In Label       : 131071                 Out Label      : 127952                
Previous Hop   : 10.10.12.3             Next Hop       : 10.10.106.4           
SetupPriority  : 4                      Hold Priority  : 4                     
Class Type     : 5                                                             
SugGrpOrig ID  : 0                      SubGrpOrig Addr: 0.0.0.0               
P2MP ID        : 0                                                             
 
Path Recd      : 119                    Path Sent      : 123                   
Resv Recd      : 121                    Resv Sent      : 120                   
 
Summary messages:
SPath Recd     : 0                      SPath Sent     : 0                     
SResv Recd     : 0                      SResv Sent     : 0                     
==============================================================================
*A:Dut-B#
 
 
*A:Dut-B# show router rsvp session detour-terminate detail 
==============================================================================
RSVP Sessions (Detailed)
------------------------------------------------------------------------------
LSP : tof878::1_detour
------------------------------------------------------------------------------
From           : 10.20.1.2              To             : 10.20.1.4             
Tunnel ID      : 878                    LSP ID         : 14929                 
Style          : SE                     State          : Up                    
Session Type   : Terminate (Detour)                                            
In Interface   : lag-1:0                Out Interface  : 1/1/2:8               
In Label       : 131069                 Out Label      : 127951                
Previous Hop   : 10.10.12.3             Next Hop       : 10.10.108.4           
SetupPriority  : 4                      Hold Priority  : 4                     
Class Type     : 5                                                             
SugGrpOrig ID  : 0                      SubGrpOrig Addr: 0.0.0.0               
P2MP ID        : 0                                                             
 
Path Recd      : 128                    Path Sent      : 0                     
Resv Recd      : 125                    Resv Sent      : 124                   
 
Summary messages:
SPath Recd     : 0                      SPath Sent     : 0                     
SResv Recd     : 0                      SResv Sent     : 0                     
==============================================================================
*A:Dut-B#
 
 
*A:Dut-B# show router rsvp session bypass-tunnel detail 
==============================================================================
RSVP Sessions (Detailed)
------------------------------------------------------------------------------
LSP : bypass-link10.10.108.4
------------------------------------------------------------------------------
From           : 10.20.1.2              To             : 10.10.109.4           
Tunnel ID      : 4003                   LSP ID         : 6                     
Style          : FF                     State          : Up                    
Session Type   : Bypass Tunnel                                                 
In Interface   : n/a                    Out Interface  : 1/1/2:9               
In Label       : n/a                    Out Label      : 124069                
Previous Hop   : n/a                    Next Hop       : 10.10.109.4           
SetupPriority  : 7                      Hold Priority  : 0                     
Class Type     : 0                                                             
SugGrpOrig ID  : 0                      SubGrpOrig Addr: 0.0.0.0               
P2MP ID        : 0                                                             
 
Path Recd      : 0                      Path Sent      : 3                     
Resv Recd      : 4                      Resv Sent      : 0                     
 
Summary messages:
SPath Recd     : 0                      SPath Sent     : 0                     
SResv Recd     : 0                      SResv Sent     : 0                     
==============================================================================
*A:Dut-B#

statistics

Syntax 
statistics
Context 
show>router>rsvp
Description 

This command displays global statistics in the RSVP instance.

Output 

RSVP Statistics Output

Table 32 describes RSVP statistics output fields.

Table 32:  RSVP Statistics Output Fields 

Label

Description  

PATH Timeouts

The total number of path timeouts.

RESV Timeouts

The total number of RESV timeouts.

Sample Output
*A:SR1# /show router rsvp statistics
===============================================================================
RSVP Global Statistics
===============================================================================
PATH Timeouts      : 0                  RESV Timeouts      : 0
GR Helper PATH Tim*: 0                  GR Helper RESV Tim*: 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
 
 
*A:SRU4>show>router>rsvp# statistics
===============================================================================
RSVP Global Statistics
===============================================================================
PATH Timeouts      : 1026               RESV Timeouts      : 182
===============================================================================
*A:SRU4>show>router>rsvp#

status

Syntax 
status
Context 
show>router>rsvp
Description 

This command displays RSVP status.

Output 

RSVP Status

Table 33 describes RSVP status output fields.

Table 33:  RSVP Status Output Fields 

Label

Description  

Admin Status

Down — RSVP is administratively disabled.

Up — RSVP is administratively enabled.

Oper Status

Down — RSVP is operationally down.

Up — RSVP is operationally up.

Keep Multiplier

Displays the keep-multiplier number used by RSVP to declare that a reservation is down or the neighbor is down.

Refresh Time

Displays the refresh-time interval (in s), between the successive Path and Resv refresh messages.

Message Pacing

Enabled — RSVP messages, specified in the max-burst command, are sent in a configured interval, specified in the period command.

Disabled — Message pacing is disabled. RSVP message transmission is not regulated.

Pacing Period

Displays the time interval (in ms), when the router can send the specified number of RSVP messages specified in the rsvp max-burst command.

Max Packet Burst

Displays the maximum number of RSVP messages that are sent in the specified period under normal operating conditions.

Soft Preemption Timer

Displays the time (in s), a node holds on to a reservation for which it has triggered the soft preemption procedure.

Rapid Retransmit

Displays the value of the rapid retransmission interval.

Rapid Retry Limit

Displays the rapid retry limit.

Graceful Shutdown

Specifies whether graceful shutdown of the RSVP node is enabled.

Dark Bandwidth

Indicates the status of the dark bandwidth accounting application.

DBw Sample Intv

Displays the configured dark bandwidth sampling interval.

DBw Up Threshold

Displays the configured dark bandwidth up threshold.

DBw Down Threshold

Displays the configured dark bandwidth down threshold.

DBw Multiplier

Displays the configured dark bandwidth multiplier.

DBw Sample Multp

Displays the configured dark bandwidth sample multiplier.

Sample Output
B:# show router rsvp status
========================================================================
RSVP Status
========================================================================
Admin Status       : Down               Oper Status        : Down
Keep Multiplier    : 3                  Refresh Time       : 30 sec
Message Pacing     : Disabled           Pacing Period      : 100 msec
Max Packet Burst   : 650 msgs           Refresh Bypass     : Disabled
Rapid Retransmit   : 5 hmsec            Rapid Retry Limit  : 3
Graceful Shutdown  : Disabled           SoftPreemptionTimer: 300 sec
Implicit Null Label: Disabled           Node-id in RRO     : Exclude
P2P Merge Point Ab*: 10                 P2MP Merge Point A*: 10
DiffServTE AdmModel: Basic
Percent Link Bw CT0: 100                Percent Link Bw CT4: 0
Percent Link Bw CT1: 0                  Percent Link Bw CT5: 0
Percent Link Bw CT2: 0                  Percent Link Bw CT6: 0
Percent Link Bw CT3: 0                  Percent Link Bw CT7: 0
TE0 -> Class Type  : 0                  Priority           : 0
TE1 -> Class Type  : 0                  Priority           : 1
TE2 -> Class Type  : 0                  Priority           : 2
TE3 -> Class Type  : 0                  Priority           : 3
TE4 -> Class Type  : 0                  Priority           : 4
TE5 -> Class Type  : 0                  Priority           : 5
TE6 -> Class Type  : 0                  Priority           : 6
TE7 -> Class Type  : 0                  Priority           : 7
IgpThresholdUpdate : Disabled
Up Thresholds(%)   : 0 15 30 45 60 75 80 85 90 95 96 97 98 99 100
Down Thresholds(%) : 100 99 98 97 96 95 90 85 80 75 60 45 30 15 0
Update Timer       : N/A
Update on CAC Fail : Disabled
Dark Bandwidth     : Enabled            DBw Multiplier     : 100
DBw Sample Intv    : 30                 DBw Sample Multp   : 3
DBw Up Threshold   : 0 %
DBw Down Threshold : 0 %
========================================================================
* indicates that the corresponding row element may have been truncated.

lsp-bfd

Syntax 
lsp-bfd
lsp-bfd ldp prefix ip-prefix/prefix-length
lsp-bfd local-bfd-discrim bfd-discriminator
lsp-bfd lsp-name lsp-name
Context 
show>test-oam
Description 

This command displays information about Bidirectional Forwarding Detection (BFD) sessions on LSPs.

Parameters 
ip-prefix/prefix-length—
Specifies an IP prefix for which to display BFD session information, and the length of the prefix.
Values—
ipv4-prefix — a.b.c.d
ipv4-prefix-length — 0 to 32
ipv6-prefix — x:x:x:x:x:x:x:x (eight 16-bit pieces)
                      x:x:x:x:x:x:d.d.d.d
                      x — 0 to FFFF (hexadecimal)
                      d — 0 to 255 (decimal)
ipv6-prefix-length — 0 to 128

 

bfd-discriminator—
Displays information about the unique local discriminator for this session.
lsp-name—
Specifies information about the specified LSP name up to 64 characters in length.
Output 

The following output is an example of BFD LSP fields.

Sample Output
A:bkvm1# show test-oam lsp-bfd local-bfd-discrim 1
-------------------------------------------------------------------------------
LSP Ping Bootstrap and Periodic Verification Information for BFD on an LSP
-------------------------------------------------------------------------------
LSP Name : Z
LSP Path Status         : unknown
Replying Node           : (None)
Latest Return Code      : NoRtnCode (0)
Latest Return Subcode   : 3
Local BFD Discriminator : 1            Remote BFD Discriminator : 4111222333
Tx LSP Ping Requests    : 2123456789   Rx LSP Ping Requests     : 3123456789
-------------------------------------------------------------------------------
A:bkvm1#
 
 
A:bkvm1# show test-oam lsp-bfd local-bfd-discrim 1
-------------------------------------------------------------------------------
LSP Ping Bootstrap and Periodic Verification Information for BFD on an LSP
-------------------------------------------------------------------------------
LSP Name : Z
LSP Path Status         : active
Replying Node           : 192.168.242.243
Latest Return Code      : DSRtrMatchLabel (8)
Latest Return Subcode   : 4
Local BFD Discriminator : 1            Remote BFD Discriminator : 4111222333
Tx LSP Ping Requests    : 2123456789   Rx LSP Ping Requests     : 3123456789
-------------------------------------------------------------------------------
A:bkvm1#
 
 
A:bkvm1# show test-oam lsp-bfd local-bfd-discrim 1
-------------------------------------------------------------------------------
LSP Ping Bootstrap and Periodic Verification Information for BFD on an LSP
-------------------------------------------------------------------------------
LSP Name : Z
LSP Path Status         : inactive
Replying Node           : 2001:db8:f4f5:f6f7:f8f9:fafb:fcfd:feff
Latest Return Code      : DSRtrUnmatchLabel (10)
Latest Return Subcode   : 5
Local BFD Discriminator : 1            Remote BFD Discriminator : 4111222333
Tx LSP Ping Requests    : 2123456789   Rx LSP Ping Requests     : 3123456789
-------------------------------------------------------------------------------
A:bkvm1#
 
 
A:bkvm1# show test-oam lsp-bfd local-bfd-discrim 1
-------------------------------------------------------------------------------
LSP Ping Bootstrap and Periodic Verification Information for BFD on an LSP
-------------------------------------------------------------------------------
LSP Name : Z
LSP Path Status         : unknown
Replying Node           : (None)
Latest Return Code      : DSNoMac (16)
Latest Return Subcode   : 6
Local BFD Discriminator : 1            Remote BFD Discriminator : 4111222333
Tx LSP Ping Requests    : 2123456789   Rx LSP Ping Requests     : 3123456789
-------------------------------------------------------------------------------
A:bkvm1#
 
 
*B:Dut-B# show test-oam lsp-bfd ldp prefix 10.20.1.3/32 
-------------------------------------------------------------------------------
LSP Ping Bootstrap and Periodic Verification Information for BFD on LSPs
-------------------------------------------------------------------------------
FEC Type                 : LDP          
Prefix                   : 10.20.1.3/32
Source Address           : 10.20.1.2
Replying Node            : 10.20.1.3
Latest Return Code       : EgressRtr (3)
Latest Return Subcode    : 1
Local BFD Discriminator  : 1            Remote BFD Discriminator : 43
LSP Ping Tx Interval (s) : 60           Bootstrap Retry Count    : 0
Tx LSP Ping Requests     : 2            Rx LSP Ping Replies      : 2
-------------------------------------------------------------------------------
No. of matching BFD on LSP sessions: 1
-------------------------------------------------------------------------------

2.16.2.5. Tools Commands

bypass-tunnel

Syntax 
bypass-tunnel [lsp-name] plr
Context 
tools>dump>router>mpls
Description 

This command displays information about the MPLS bypass tunnel.

Parameters 
lsp-name—
Specifies the LSP name up to 64 characters in length.

ftn

Syntax 
ftn
Context 
tools>dump>router>mpls
Description 

This command dumps FTN information for MPLS.

ilm

Syntax 
ilm
Context 
tools>dump>router>mpls
Description 

This command dumps ILM information for MPLS.

logger-event-bundling

Syntax 
logger-event-bundling
Context 
tools>dump>router>mpls
Description 

This command dumps logger event bundling information for MPLS.

lspinfo

Syntax 
lspinfo [lsp-name] [detail]
Context 
tools>dump>router>mpls
Description 

This command dumps MPLS LSP information.

Parameters 
lsp-name—
Specifies the LSP name, up to 64 characters.
detail—
Specifies detailed LSP information.
Output 

The following output is an example of a BFD session that is up (LSPS UP).

Sample Output
*A:Dut-B# tools dump router mpls lspinfo 
LSP "lsp1"  LspIdx 1  LspType Dynamic  State LSPS_UP  Flags 0x2000
NumPaths 3  NumSdps 0  NumCBFSdps 0  NumFltrEntries 0
HoldTimeRemaining 0secs  ClassType 0  Metric 0  OperMetric 2000
LDPoRsvp Include  VprnAutoBind Include IgpShortCut Include BgpShortCut Include
BgpTransTunnel Include IpShCutTtlPropLocal TRUE IpShCutTtlPropTans TRUE
RelativeMetricOffset 2147483647 EntropyLbl inherit MTU 1500 LspAdminState :2
LspOperState : 2 lspRowStatus : 1
ClassForwarding: Disabled
BFD Enabled  Template bfdTemp1  PingInterval 60 Failure-Action Failover

The following output is an example of a BFD session that is degraded (LSPS DEGRADED).

*A:Dut-B# /tools dump router mpls  lspinfo "lsp1"
LSP "lsp1"  LspIdx 1  LspType Dynamic  State LSPS_DEGRADED  Flags 0x2000
NumPaths 3  NumSdps 0  NumCBFSdps 0  NumFltrEntries 0
HoldTimeRemaining 0secs  ClassType 0  Metric 0  OperMetric 2000
LDPoRsvp Include  VprnAutoBind Include IgpShortCut Include BgpShortCut Include
BgpTransTunnel Include IpShCutTtlPropLocal TRUE IpShCutTtlPropTans TRUE
RelativeMetricOffset 2147483647 EntropyLbl inherit MTU 1500 LspAdminState :2
LspOperState : 2 lspRowStatus : 1
ClassForwarding: Disabled
BFD Enabled  Template bfdTemp1  PingInterval 60 Failure-Action Failover
 
Total Ingress LSP Count         : 1

memory-usage

Syntax 
memory-usage
Context 
tools>dump>router>mpls
Description 

This command dumps memory usage information for MPLS.

te-lspinfo

Syntax 
te-lspinfo [endpoint ip-address] [sender ip-address] [lspid lsp-id] [detail] [p2p | p2p-tid tunnel-id]
te-lspinfo [endpoint ip-address] [sender ip-address] [lspid lsp-id] [detail] [p2mp | p2mp-tid tunnel-id]{ [phops] [nhops] [s2l ip-address] } }
Context 
tools>dump>router>mpls
Description 

This command displays TE LSP information for MPLS.

Output 

The following output is an example of MPLS TE LSP fields.

Sample Output
B:Dut-R# tools dump router mpls te-lspinfo
Key P2P: Session(10.10.3.2, 201, 10.3.3.3) Sender(10.3.3.3, 2) PHOP(10.10.3.1), 
Flags 
0x0
 
Key P2P: Session(10.10.3.1, 1035, 10.4.4.4) Sender(10.4.4.4, 22) PHOP(10.10.11.2), 
Flags 
0x0
 
Key P2MP: Session(0.0.0.0, 1, 10.4.4.4) Sender(10.4.4.4, 52226) PHOP(0.0.0.0) Flags 
0x10
  S2L [1] Key: endPoint to 10.2.2.2   subGroupId - 1 subGroupOrigId - 10.4.4.4
  S2L [2] Key: endPoint to 10.10.2.2  subGroupId - 3 subGroupOrigId - 10.4.4.4
  S2L [3] Key: endPoint to 10.10.13.2 subGroupId - 4 subGroupOrigId - 10.4.4.4  
 
Key P2MP: Session(0.0.0.0, 2, 10.4.4.4) Sender(10.4.4.4, 51714) PHOP(0.0.0.0) Flags 
0x10
  S2L [1] Key: endPoint to 10.2.2.2   subGroupId - 1 subGroupOrigId - 10.4.4.4
  S2L [2] Key: endPoint to 10.10.2.2  subGroupId - 3 subGroupOrigId - 10.4.4.4
  S2L [3] Key: endPoint to 10.10.13.2 subGroupId - 4 subGroupOrigId - 10.4.4.4
 
Key P2MP: Session(0.0.0.0, 3, 10.4.4.4) Sender(10.4.4.4, 53250) PHOP(0.0.0.0) Flags 
0x10
 
*A:Dut-T# tools dump router mpls te-lspinfo p2mp-tid 102 nhops 
 
  Key P2MP: Session(0.0.0.0, 102, 10.4.4.4) Sender(10.4.4.4, 3074) PHOP(0.0.0.0) 
Flags 
0x10
  --------------------------------------------------------------------------
        List of NEXT HOPS
  --------------------------------------------------------------------------
 
  NextHop [1] =>
  Key: Nhop - isFrr 0, outIf 0, NextHop 0.0.0.0 label - 128843  global Instance 0 is
Leaf node
        ----------------------------------------------------------------------
        Primary NHLFE => outLabel - 0 and NextHop - 0.0.0.0, outIf 0 (0)
                Port(NONE) NhIdx 0, ProtNhIdx 0, NumS2L 1
                ProtectInstance - 0, ProtectGroup 0
        POP
        No Backup NHLFEs for this Ltn entry
  Mid List :    3428 numS2Ls - 1 (Primary MID),
 
  NextHop [2] =>
  Key: Nhop - isFrr 0, outIf 3, NextHop 10.10.13.2 label - 128806  global Instance -
48747
        ----------------------------------------------------------------------
        Primary NHLFE => outLabel - 128806 and NextHop - 10.10.13.2, outIf 3 (126)
                Port(9/1/1) NhIdx 4322, ProtNhIdx 2275, NumS2L 1
                ProtectInstance - 1, ProtectGroup 126
        SWAP
        Backup NHLFE => outLabel - 130223 and NextHop - 10.10.3.2, outIf 5 (124)
                Port(9/2/3) outPushLabel 128806, NhIdx 5469, ProtNhIdx 0, NumS2L 1
  Mid List :    3428 numS2Ls - 1 (Primary MID),
 
  NextHop [3] =>
  Key: Nhop - isFrr 0, outIf 4, NextHop 10.10.2.2 label - 128836  global Instance -
48974
        ----------------------------------------------------------------------
        Primary NHLFE => outLabel - 128836 and NextHop - 10.10.2.2, outIf 4 (125)
                Port(lag-1) NhIdx 4292, ProtNhIdx 2245, NumS2L 2
                ProtectInstance - 1, ProtectGroup 125
        SWAP
        Backup NHLFE => outLabel - 130223 and NextHop - 10.10.3.2, outIf 5 (124)
                Port(9/2/3) outPushLabel 128836, NhIdx 5659, ProtNhIdx 0, NumS2L 2
  Mid List :    3428 numS2Ls - 1 (Primary MID),   3471 numS2Ls - 1 (Backup MID), 
 
  S2L [1] Key: endPoint to 10.2.2.2   subGroupId - 1 subGroupOrigId - 10.4.4.4
  S2L [2] Key: endPoint to 10.3.3.3   subGroupId - 2 subGroupOrigId - 10.4.4.4
  S2L [3] Key: endPoint to 10.10.2.2  subGroupId - 3 subGroupOrigId - 10.4.4.4
  S2L [4] Key: endPoint to 10.10.13.2 subGroupId - 4 subGroupOrigId - 10.4.4.4
 
  Total TeLspInfo Count   : 1

tp-interface

Syntax 
tp-interface interface-num [clear]
Context 
tools>dump>router>mpls
Description 

This command displays MPLS-TP interface information.

Parameters 
interface-num—
specifies the MPLS-TP interface
Values—
1 to 4294967295

 

clear
clears statistics after reading
Output 

The following output is an example of MPLS TP interface fields.

Sample Output
1-2 (1/1/3) : State Up, Cnt/Tm - Dn: 1/000 00:30:11.150, Up 1/000 00:30:15.160
  MEP: ifNum 1 (Validate: Y), ais: Y (txCnt 0)
    ais - Flags: 0x1 (R), Timers:

tp-tunnel

Syntax 
tp-tunnel lsp-name [clear]
tp-tunnel id tunnel-id [clear]
Context 
tools>dump>router>mpls
Description 

This command displays MPLS-TP tunnel information.

Parameters 
lsp-name—
specifies the LSP name, up to 64 characters
id tunnel-id—
specifies the tunnel ID
Values—
1 to 61440

 

clear
clears statistics after reading
Output 

The following output is an example of MPLS TP interface fields.

Sample Output
NEED SAMPLE OUTPUT FOR THIS COMMAND

neighbor

Syntax 
neighbor [ip-address] [detail]
Context 
tools>dump>router>rsvp
Description 

This command dumps RSVP neighbor information.

Parameters 
ip-address—
Specifies the IP address.
Values—
a.b.c.d

 

detail—
Specifies detailed information.
Output 

The following output is an example of MPLS RSVP neighbor details.

Sample Output
NEED SAMPLE OUTPUT 

psb

Syntax 
psb
Context 
tools>dump>router>rsvp
Description 

This command displays RSVP information.

Output 

The following output is an example of MPLS RSVP PSB detail fields.

Sample Output
*A:Dut-A>config>router>mpls>lsp$ /tools dump router rsvp psb detail 
-----------------------------------------------------------------------
PSB: 
 P2P: Session (To: 10.20.1.4 - 61441 - 10.20.1.1), Sender (10.20.1.1 - 2) PHop 
255.255.255.255
 
PSB CurrState: BACKUPS_CONNECTED  PrevState: BACKUPS_INIT  Flags: 0x0
LocalLabel 0 OutLabel 131070
Incoming IfIndex: Interface: Local API(-1)
Refresh interval 0, Send Path refresh in 3 secs,  Path Refresh timeout 0 secs
PrevHop: Ctype 1  Addr 255.255.255.255, LIH 0
DnStream Nbr: Addr-> 10.20.1.3  IfIndex ip-10.10.2.1(3)
UpStream Neighbor is NULLP
Session Attribute:
   Session Name: bypass-node10.20.1.2
   HoldPri: 0 SetupPri: 7 Flags: 0x2
   Ctype: 7, IncludeGroup: 0x0 IncludeAllGroup: 0x0 ExcludeGroup: 0x0
ClassType: Absent
TSpec: Flags 0x8000 QOSC 0, PDR (infinity), PBS 0.000 bps, CDR (0.000 bps) MTU: 0
CSPF Hop List: ->
  (1) UnnumIfId 3 RtrId 10.20.1.1 EgrAdmGrp 0x0 (Strict)
  (2) UnnumIfId 2 RtrId 10.20.1.3 EgrAdmGrp 0x0 (Strict)
  (3) UnnumIfId 5 RtrId 10.20.1.4 EgrAdmGrp 0x0 (Strict)
PSB RRO : -> 
  (1) * Flags : 0x0 :      U 
  (1) * UnInf : 10.20.1.1, 3
PSB SENT RRO : -> 
  (1) * Flags : 0x0 :      U 
  (1) * UnInf : 10.20.1.1, 3
PSB FILTERSPEC RRO : -> 
  (1) * Flags : 0x0 :      U 
  (1) * UnInf : 10.20.1.3, 2
  (2) * Flags : 0x1 :     Global
  (2) * Label : 131070
  (3) * Flags : 0x0 :      U 
  (3) * UnInf : 10.20.1.4, 5
  (4) * Flags : 0x1 :     Global
  (4) * Label : 131070
PSB ERO : -> 
  (1) Unnumbered RouterId 10.20.1.1, LinkId 3, Strict
  (2) Unnumbered RouterId 10.20.1.3, LinkId 2, Strict
  (3) Unnumbered RouterId 10.20.1.4, LinkId 5, Strict
PSB SENT ERO : ->                    
  (1) Unnumbered RouterId 10.20.1.3, LinkId 2, Strict
  (2) Unnumbered RouterId 10.20.1.4, LinkId 5, Strict
SendTempl: Sender:10.20.1.1_2
AdSpec Present - Flags: 0x0 
  AdSpec General
  - Service Break bit           : 0x0 
  - IS Hop Count                : 0x0 
  - Path Bandwidth Estimate     : 0x0 
  - Minimum Path latency        : 0x0 
  - Composed path MTU           : 0 
 
Num Paths Received   :0
Num Paths Transmitted:5
Num Resvs Received   :8
Num Resvs Transmitted:0
 
Num Summmary Paths Received   :0
Num Summmary Paths Transmitted:0
Num Summmary Resvs Received   :0
Num Summmary Resvs Transmitted:0
Created at 91359 (26 secs back)
-----------------------------------------------------------------------
-----------------------------------------------------------------------
PSB: 
 P2P: Session (To: 10.20.1.6 - 1 - 10.20.1.1), Sender (10.20.1.1 - 30208) 
PHop 0.0.0.0
 
PSB CurrState: PRIMARYS_CONNECTED  PrevState: PRIMARYS_INIT  Flags: 0x8
LocalLabel 0 OutLabel 131071
Incoming IfIndex: Interface: Local API(-1)
Refresh interval 5, Send Path refresh in 4 secs,  Path Refresh timeout 0 secs
PrevHop: Ctype 1  Addr 0.0.0.0, LIH 0
DnStream Nbr: Addr-> 10.20.1.2  IfIndex ip-10.10.1.1(2)
UpStream Neighbor is NULLP
Session Attribute:
   Session Name: 1::1
   HoldPri: 0 SetupPri: 7 Flags: 0x17
   Ctype: 7, IncludeGroup: 0x0 IncludeAllGroup: 0x0 ExcludeGroup: 0x0
ClassType: Absent
TSpec: Flags 0x8000 QOSC 1, PDR (infinity), PBS 0.000 bps, CDR (0.000 bps) MTU: 0
CSPF Hop List: ->                    
  (1) UnnumIfId 2 RtrId 10.20.1.1 EgrAdmGrp 0x0 (Strict)
  (2) UnnumIfId 2 RtrId 10.20.1.2 EgrAdmGrp 0x0 (Strict)
  (3) UnnumIfId 2 RtrId 10.20.1.4 EgrAdmGrp 0x0 (Strict)
  (4) UnnumIfId 2 RtrId 10.20.1.6 EgrAdmGrp 0x0 (Strict)
PSB RRO : -> 
  (1) * Flags : 0x9 :      U LP_AVAIL NODE 
  (1) * UnInf : 10.20.1.1, 2
PSB SENT RRO : -> 
  (1) * Flags : 0x0 :      U 
  (1) * UnInf : 10.20.1.1, 2
PSB FILTERSPEC RRO : -> 
  (1) * Flags : 0x9 :      U LP_AVAIL NODE 
  (1) * UnInf : 10.20.1.2, 2
  (2) * Flags : 0x1 :     Global
  (2) * Label : 131071
  (3) * Flags : 0x1 :      U LP_AVAIL 
  (3) * UnInf : 10.20.1.4, 2
  (4) * Flags : 0x1 :     Global
  (4) * Label : 131071
  (5) * Flags : 0x0 :      U 
  (5) * UnInf : 10.20.1.6, 2
  (6) * Flags : 0x1 :     Global
  (6) * Label : 131071
PSB ERO : -> 
  (1) Unnumbered RouterId 10.20.1.2, LinkId 2, Strict
  (2) Unnumbered RouterId 10.20.1.4, LinkId 2, Strict
  (3) Unnumbered RouterId 10.20.1.6, LinkId 2, Strict
PSB SENT ERO : -> 
  (1) Unnumbered RouterId 10.20.1.2, LinkId 2, Strict
  (2) Unnumbered RouterId 10.20.1.4, LinkId 2, Strict
  (3) Unnumbered RouterId 10.20.1.6, LinkId 2, Strict
SendTempl: Sender:10.20.1.1_30208
AdSpec not present
FRR: Flags 0x2 HopLimit 16 SetupPri 7 HoldPri 0 IncludeAny 0x0 ExcludeAny 0x0 
IncludeAll 0x0
PLR: Flag (0x166) State PLRS_BYPASS_UP AvoidNodeId 10.20.1.2 inIntf -1 inLabel 0
PLR: FRRRequestCount: 1  CSPFFailures: 0  ProtectionType: NodeProtect
 
Num Paths Received   :0
Num Paths Transmitted:5
Num Resvs Received   :5              
 Num Resvs Transmitted:0
 
Num Summmary Paths Received   :0
Num Summmary Paths Transmitted:0
Num Summmary Resvs Received   :0
Num Summmary Resvs Transmitted:0
Created at 91359 (28 secs back)
-----------------------------------------------------------------------
  Total PSB Count   : 2 

rsb

Syntax 
rsb
Context 
tools>dump>router>rsvp
Description 

This command displays RSVP RSB information.

Output 

The following output is an example of MPLS RSVP RSB detail fields.

Sample Output
4)*A:Dut-A>config>router>mpls>lsp$ /tools dump router rsvp rsb detail 
-----------------------------------------------------------------------
RSB: 
 EndPt 10.20.1.4  Tid 61441  XTid 10.20.1.1  Sndr 10.20.1.1  LspId 2  ifIndex 3 NHop
10.20.1.3
Style FF, refresh in 0 secs
RSVP NextHop 10.20.1.3, LIH 3 (TLV: RtrId 10.20.1.3 IntfId 2)
CT Shared Reservation Info:
No Reservation:
FlowSpec :Flags 0x8000 QOSC 1, PDR (infinity), PBS 0.000 bps, CDR (0.000 bps)
           CBS 0, EBS 0, RSpecR 0, RSpecS 0 MTU 1500 MPU 20
FwdFlowspec :Flags 0x0 QOSC 0, PDR (0.000 bps), PBS 0.000 bps, CDR (0.000 bps)
              CBS 0, EBS 0, RSpecR 0, RSpecS 0 MPU 0
FilterSpec:
Timeout in : 26 secs, LocLabel: 0  Sender: 10.20.1.1 lspId: 2 OutIfId: 0
RRO :
  (1) * Flags : 0x0 :      U 
  (1) * UnInf : 10.20.1.3, 2
  (2) * Flags : 0x1 :     Global
  (2) * Label : 131070
  (3) * Flags : 0x0 :      U 
  (3) * UnInf : 10.20.1.4, 5
  (4) * Flags : 0x1 :     Global
  (4) * Label : 131070
-----------------------------------------------------------------------
-----------------------------------------------------------------------
RSB: 
 EndPt 10.20.1.6  Tid 1  XTid 10.20.1.1  Sndr 0.0.0.0  LspId 0  ifIndex 2 NHop 
10.20.1.2
Style SE, refresh in 0 secs
RSVP NextHop 10.20.1.2, LIH 2 (TLV: RtrId 10.20.1.2 IntfId 2)
CT Shared Reservation Info:
No Reservation:
FlowSpec :Flags 0x8000 QOSC 1, PDR (infinity), PBS 0.000 bps, CDR (0.000 bps)
           CBS 0, EBS 0, RSpecR 0, RSpecS 0 MTU 1496 MPU 20
FwdFlowspec :Flags 0x0 QOSC 0, PDR (0.000 bps), PBS 0.000 bps, CDR (0.000 bps)
              CBS 0, EBS 0, RSpecR 0, RSpecS 0 MPU 0
FilterSpec:
Timeout in : 21 secs, LocLabel: 0  Sender: 10.20.1.1 lspId: 30208 OutIfId: 0
RRO :
  (1) * Flags : 0x9 :      U LP_AVAIL NODE 
  (1) * UnInf : 10.20.1.2, 2
  (2) * Flags : 0x1 :     Global
  (2) * Label : 131071                
  (3) * Flags : 0x1 :      U LP_AVAIL 
  (3) * UnInf : 10.20.1.4, 2
  (4) * Flags : 0x1 :     Global
  (4) * Label : 131071
  (5) * Flags : 0x0 :      U 
  (5) * UnInf : 10.20.1.6, 2
  (6) * Flags : 0x1 :     Global
  (6) * Label : 131071
-----------------------------------------------------------------------
  Total RSB Count   : 2 

tcsb

Syntax 
tcsb [endpoint endpoint-address] [sender sender-address] [tunnelid tunnel-id] [lspid lsp-id] [detail]
Context 
tools>dump>router>rsvp
Description 

This command dumps RSVP tcsb information.

Parameters 
endpoint endpoint-address—
Specifies the endpoint IP address.
Values—
a.b.c.d

 

sender sender-address—
Specifies the sender IP address.
Values—
a.b.c.d

 

tunnelid tunnel-id—
Specifies the tunnel ID.
Values—
0 to 4294967295

 

lsp lsp-id—
Specifies the LSP ID.
Values—
1 to 65535

 

detail—
Specifies detailed information.
Output 

The following output is an example of MPLS RSVP tcsb details.

Sample Output
NEED SAMPLE OUTPUT 

adjust-autobandwidth

Syntax 
adjust-autobandwidth [lsp lsp-name [force [bandwidth mbps]]]
Context 
tools>perform>router>mpls
Description 

This command initiates an immediate automatic bandwidth adjustment attempt for either one specific LSP or all active LSPs. The automatic bandwidth adjustment is made to the primary or secondary path of the LSP, whichever is the currently active path. If an LSP is not specified, then the system assumes the command applies to all LSPs. The optional force parameter, which is available only when an LSP is referenced, determines whether adjust-up and adjust-down threshold checks are applied. If force is not specified then the maximum average data rate must differ from the current reservation by more than the adjust-up or adjust-down thresholds, otherwise no bandwidth adjustment occurs. If the force option is specified then, bandwidth adjustment ignores the configured thresholds. If a bandwidth is specified as part of the force option then the bandwidth of the LSP is changed to this specific value, otherwise the bandwidth is changed to the maximum average data rate that has been measured by the system in the current adjust interval.

The adjust-count and maximum average data rate are not reset by the manual auto-bandwidth command, whether or not the bandwidth adjustment succeeds or fails. The overflow count is reset only if the manual auto-bandwidth attempt is successful.

Parameters 
lsp-name—
Specifies the LSP name, up to 64 characters in length, to which this command applies. If this parameter is not supplied the command applies to all active LSPs.
mbps—
Specifies the bandwidth that the LSP should be immediately resized to.
Values—
0 to100000

 

cspf

Syntax 
cspf to ip-addr [from ip-addr] [bandwidth bandwidth] [include-bitmap bitmap] [exclude-bitmap bitmap] [hop-limit limit] [exclude-address excl-addr [excl-addr...(up to 8 max)]] [use-te-metric] [strict-srlg] [srlg-group grp-id...(up to 8 max)] [exclude-node excl-node-id [excl-node-id..(up to 8 max)]] [skip-interface interface-name] [ds-class-type class-type] [cspf-reqtype req-type] [least-fill-min-thd thd] [setup-priority val] [hold-priority val]
Context 
tools>perform>router>mpls
Description 

This command computes a CSPF path with specified user constraints.

Parameters 
to ip-addr
Specifies the destination IP address.
from ip-addr
Specifies the originating IP address.
bandwidth bandwidth
Specifies the amount of bandwidth in Mb/s to be reserved.
include-bitmap bitmap
Specifies to include a bit-map that specifies a list of admin groups that should be included during setup.
exclude-bitmap bitmap
Specifies to exclude a bit-map that specifies a list of admin groups that should be included during setup.
hop-limit limit
Specifies the total number of hops a detour LSP can take before merging back onto the main LSP path.
exclude-address ip-addr
Specifies IP addresses, up to 8, that should be included during setup.
use-te-metric—
Specifies the use of the traffic engineering metric used on the interface.
strict-srlg—
Specifies whether to associate the LSP with a bypass or signal a detour if a bypass or detour satisfies all other constraints except the SRLG constraints.
srlg-group grp-id
Specifies up to 8 Shared Risk Loss Groups (SRLGs). An SRLG group represents a set of interfaces which could be subject to the same failures or defects and thus share the same risk of failing.
Values—
0 to 4294967295

 

exclude-node excl-node-id
specifies a list of address that should be excluded when this LSP is setup.
skip-interface interface-name
Specifies an interface name that should be skipped during setup.
ds-class-type class-type
Specifies the class type (CT) associated with this LSP.
Values—
0 to 7

 

cspf-reqtype req-type
Specifies the req. type.
Values—
all, random, least-fill

 

least-fill-min-thd thd
Specifies whether the use of the least-fill path selection method for the computation of the path of this LSP is enabled.
Values—
1 to 100

 

setup-priority val
Specifies the setup priority to use when insufficient bandwidth is available to setup an LSP.
Values—
0 to 7

 

hold-priority val
Specifies the hold priority value to use when insufficient bandwidth is available to setup an LSP.
Values—
0 to 7

 

force-switch-path

Syntax 
force-switch-path [lsp lsp-name] [path path-name]
no force-switch-path lsp lsp-name
Context 
tools>perform>router>mpls
Description 

Use this command to move from a standby path to any other standby path regardless of priority.

The no form of the command reverts to priority path.

Parameters 
lsp-name—
Specifies an existing LSP name, up to 64 characters in length.
path-name—
Specifies the path name to which to move the specified LSP.

resignal

Syntax 
resignal {lsp lsp-name path path-name | delay minutes}
resignal {p2mp-lsp p2mp-lsp-name p2mp-instance p2mp-instance-name | p2mp-delay p2mp-minutes}
resignal {p2mp-lsp p2mp-lsp-name p2mp-instance p2mp-instance-name | p2mp-delay p2mp-minutes}
Context 
tools>perform>router>mpls
Description 

This command resignals a specific LSP path. The minutes parameter configures the global timer or all LSPs for resignal. If only lsp-name and path-name are provided, the LSP will be resignaled immediately.

Parameters 
lsp-name—
Specifies an existing LSP name, up to 64 characters in length. to resignal.
path-name—
Specifies an existing path name to resignal.
delay minutes
Configures the global timer or all LSPs to resignal.
p2mp-lsp p2mp-lsp-name
Specifies an existing point-to-multipoint LSP name.
p2mp-instance p2mp-instance-name
Specifies a name that identifies the P2MP LSP instance
p2mp-delay p2mp-minutes
Specifies the delay time, in minutes.
Values—
0 to 60

 

resignal-bypass

Syntax 
resignal-bypass {lsp bypass-lsp-name [force] | delay minutes}
Context 
tools>perform>router>mpls
Description 

This command performs a manual re-optimization of a specific dynamic or manual bypass LSP, or of all dynamic bypass LSPs.

The name of a manual bypass LSP is the one provided by the user at configuration time. The name of a dynamic bypass LSP is shown in the output of show>router>mpls>bypass-tunnel dynamic detail.

The delay option triggers the global re-optimization of all dynamic bypass LSPs at the expiry of the specified delay. In essence, this option forces the global bypass resignal timer to expire after an amount of time equal to the value of the delay parameter. This option has no effect on a manual bypass LSP.

However, when a specific bypass LSP name is specified, the named dynamic or manual bypass LSP is not signaled and the associations are not evaluated even if the new bypass LSP path has the same cost as the current one. This is a different behavior from that of the similar command for the primary or secondary path of an LSP as a bypass LSP can have a large number of PSB associations.

In the specific case where the name corresponds to a manual bypass LSP, the LSP is torn down and re-signaled using the new path provided by CSPF if no PSB associations exist. If there is one or more PSB association but no PLR is active, the command is failed and the user is asked to explicitly enter the force option. In this case, the manual bypass LSP is torn down and re-signaled, leaving temporarily the associated LSP primary paths unprotected. Finally, if one or more PLRs associated with the manual bypass LSP is active, the command is failed.

Parameters 
bypass-lsp-name [force]
Specifies the name of the dynamic or manual bypass LSP. The force option is required when the name corresponds to a manual bypass LSP and the LSP has PSB associations.
delay minutes
Specifies the time, in minutes, MPLS waits before attempting to re-signal dynamic bypass LSP paths originated on the system.
Values—
0 to 30

 

revert

Syntax 
revert [lsp lsp-name]
Context 
tools>perform>router>mpls
Description 

Use this command to cause a named LSP, which is currently using a secondary path and for which the revert-timer has been configured, to switch back to using the primary path. Any outstanding revert-timer is canceled.

The primary path must be up for this command to be successful.

Parameters 
lsp-name—
Specifies an existing LSP name, up to 64 characters in length.

sr-te-cspf

Syntax 
sr-te-cspf to ip-address [path path-name] [from ip-address]
Context 
tools>perform>router>mpls
Description 

This command computes and returns the Segment Routing label stack for any user-specified MPLS path to a given destination router.

MPLS passes the specified path information to TE-DB, which converts the list of hops into a label stack by scanning the TE database for adjacency and node SID information which belongs to the router or link identified by each hop address. If the conversion is successful, the TE database will return the actual selected hop SIDs plus labels, as well the configured path hop addresses which were used as the input for this conversion.

Parameters 
to ip-address
Specifies the destination address.
path path-name
Specifies the path name.
from ip-address
Specifies the originating IP address.

switch-path

Syntax 
switch-path [lsp lsp-name] [path path-name]
Context 
tools>perform>router>mpls
Description 

Use this command to move from a standby (or an active secondary) to another standby of the same priority. If a new standby path with a higher priority or a primary path comes up after the tools perform command is executed, the path re-evaluation command runs and the path is moved to the path specified by the outcome of the re-evaluation.

Parameters 
lsp-name—
Specifies an existing LSP name, up to 64 characters in length.
path-name—
Specifies the path name to which to move the specified LSP.

tp-tunnel

Syntax 
tp-tunnel
Context 
tools>perform>router>mpls
Description 

This command enables the context to perform Linear Protection operations on an MPLS-TP LSP.

clear

Syntax 
clear id tunnel-id
clear lsp-name
Context 
tools>perform>router>mpls>tp-tunnel
Description 

This command clears all the MPLS-TP linear protection operational commands for the specified LSP that are currently active.

Parameters 
tunnel-id—
Specifies the tunnel number of the MPLS-TP LSP.
Values—
1 to 61440

 

lsp-name—
Specifies the name of the MPLS-TP LSP, up to 32 characters.

force

Syntax 
force id tunnel-id
force lsp-name
Context 
tools>perform>router>mpls>tp-tunnel
Description 

This command performs a force switchover of the MPLS-TP LSP from the active path to the protect path.

Parameters 
tunnel-id—
Specifies the tunnel number of the MPLS-TP LSP.
Values—
1 to 61440

 

lsp-name—
Specifies name of the MPLS-TP LSP, up to 32 characters.

lockout

Syntax 
lockout id tunnel-id
lockout lsp-name
Context 
tools>perform>router>mpls>tp-tunnel
Description 

This command performs a lockout of protection for an MPLS-TP LSP. This prevents a switchover to the protect path.

Parameters 
tunnel-id—
Specifies the tunnel number of the MPLS-TP LSP.
Values—
0 to 42949667295

 

lsp-name—
Specifies the name of the MPLS-TP LSP, up to 32 characters.

manual

Syntax 
manual id tunnel-id
manual lsp-name
Context 
tools>perform>router>mpls>tp-tunnel
Description 

This command performs a manual switchover of the MPLS-TP LSP from the active path to the protect path.

Parameters 
tunnel-id—
Specifies the tunnel number of the MPLS-TP LSP.
Values—
1 to 61440

 

lsp-name—
Specifies name of the MPLS-TP LSP, up to 32 characters.

trap-suppress

Syntax 
trap-suppress number-of-traps time-interval
Context 
tools>perform>router>mpls
Description 

This command modifies thresholds for trap suppression. The time-interval parameter is used to suppress traps after a certain number of traps have been raised within the time-interval period of time. By executing this command, there will be no more than number-of-traps within time-interval.

Parameters 
number-of-traps—
Specifies to the number of traps raised within a period of time before suppression occurs.
Values—
100 to 1000, in multiples of 100

 

time-interval—
Specifies the period of time before trap-suppression can occur, depending upon the number of traps received in that period of time.
Values—
1 to 300

 

update-path

Syntax 
update-path {lsp lsp-name path current-path-name new-path new-path-name}
Context 
tools>perform>router>mpls
Description 

This command enables you to instruct MPLS to replace the path of a primary or secondary LSP. The primary or secondary LSP path is indirectly identified via the current-path-name value. The same path name cannot be used more than once in a given LSP name.

This command applies to both CSPF LSP and to a non-CSPF LSP. This command will only work when the specified current-path-name has the adaptive option enabled. The adaptive option can be enabled at the LSP level or the path level.

The new path must have been configured in the CLI or provided via SNMP. The CLI command for entering the path is

configure router mpls path path-name

The command fails if any of the following conditions exist:

  1. The specified current-path-name of this LSP does not have the adaptive option enabled.
  2. The specified new-path-name value does not correspond to a previously defined path.
  3. The specified new-path-name value exists but is being used by any path of the same LSP, including this one.

When you execute this command, MPLS performs the following procedures:

  1. MPLS performs a single MBB attempt to move the LSP path to the new path.
  2. If the MBB is successful, MPLS updates the new path
    1. MPLS writes the corresponding NHLFE in the data path if this path is the current backup path for the primary.
    2. If the current path is the active LSP path, it will update the path, write the new NHLFE in the data path that will cause traffic to switch to the new path.
  3. If the MBB is not successful, the path retains its current value.
  4. The update-path MBB has the same priority as the manual re-signal MBB.

plr

Syntax 
plr
Context 
tools>dump>router>mpls>bypass-tunnel
Description 

Dump the Point of Local Repair (PLR) information for the MPLS bypass tunnel.

Output 

The following output is an example of MPLS Bypass Tunnels PLR fields.

Sample Output
tools dump router mpls bypass-tunnel plr 
========================================================================
MPLS Bypass Tunnels
========================================================================
Legend :  m - Manual      d - Dynamic      p - P2mp
========================================================================
To              State  Out I/F        Out Label     Reserved   Protected  Type
                                                    BW (Kbps)  LSP Count
------------------------------------------------------------------------
10.10.12.1      Up     1/1/4          124181        0          369        d
 
To              : 10.10.12.1         State               : Up
Out I/F         : 1/1/4              Out Label           : 124181
Up Time         : 0d 19:24:13        Active Time         : n/a
Reserved BW     : 0 Kbps             Protected LSP Count : 369
Type            : Dynamic
SetupPriority   : 7                  Hold Priority       : 0
Class Type      : 0                  Tunnel Id : 63697
Actual Hops     :
    10.10.12.2(S)      -> 10.10.12.1(S)
       
         Plr List: (Last PlrIdx 2)
         --------
                 PLR List Index = 1
                 PLR current State = PLRS_CONNECTED
                 NextNodeSysId = 10.8.8.8
                  AvoidNodeId   = 10.2.2.2
                 NodeProtect   = 2 (Node Protect)
                 LSP Count     = 197
                 PLR List Index = 2
                 PLR current State = PLRS_BackupInUse
                 NextNodeSysId = 10.8.8.8
                 AvoidNodeId   = 10.2.2.2
                 NodeProtect   = 2 (Node Protect)
                 LSP Count     = 203

tunnel-interface

Syntax 
[no] tunnel-interface rsvp-p2mp lsp-name [sender sender-address]
Context 
config>router
config>router>igmp
Description 

This command creates a tunnel interface associated with an RSVP P2MP LSP. IPv4 multicast packets are forwarded over the P2MP LSP at the ingress LER based on a static join configuration of the multicast group against the tunnel interface associated with the originating P2MP LSP. At the egress LER, packets of a multicast group are received from the P2MP LSP via a static assignment of the specific <S,G> to the tunnel interface associated with a terminating LSP.

At ingress LER, the tunnel interface identifier consists of a string of characters representing the LSP name for the RSVP P2MP LSP. The user can create one or more tunnel interfaces and associate each to a different RSVP P2MP LSP.

At egress LER, the tunnel interface identifier consists of a couple of string of characters representing the LSP name for the RSVP P2MP LSP followed by the system address of the ingress LER. The LSP name must correspond to a P2MP LSP name configured by the user at the ingress LER. The LSP name string must not contain “::” (two :s) nor contain a “:” (single “:”) at the end of the LSP name. However, a “:” (single “:”) can appear anywhere in the string except at the end of the name.

Parameters 
rsvp-p2mp lsp-name
Specifies the LSP name up to 64 characters in length.
sender sender-address
Specifies system address of the ingress LER for the P2MP RSVP LSP.

2.16.2.6. Clear Commands

session

Syntax 
session lsp-ldp head ip-prefix/prefix-length src-ip ip-address
session lsp-ldp tail ip-prefix/prefix-length dst-ip ip-address
session src-ip ip-address dst-ip ip-address
session src-ip ip-address dst-ip ip-address lsp-rsvp {head | tail} tunnel-id [0..4294967295] lsp-id [0..4294967295]
session mpls-tp lsp-name path {working | protect}
session p2mp-interface interface-name
session src-ip ip-address lsp-rsvp {head | tail} rsvp-session-name [256 chars max]
Context 
clear>router>bfd
Description 

This command clears BFD session information. Clearing the BFD session will cause it to go down and restart. This may cause any client protocols whose state is affected by BFD to go down.

As in the current implementation if clear router router-instance bfd statistics all is executed, then the router-instance is ignored and the clear is applied to all session statistics.

Parameters 
dst-ip ip-address
Clears information about the specified destination IPv4 or IPv6 address.
ip-prefix/prefix-length—
Clears session information for the specified IP prefix.
Values—
ipv4-prefix — a.b.c.d
ipv4-prefix-length — 0 to 32
ipv6-prefix — x:x:x:x:x:x:x:x (eight 16-bit pieces)
                      x:x:x:x:x:x:d.d.d.d
                      x — 0 to FFFF (hexadecimal)
                      d — 0 to 255 (decimal)
ipv6-prefix-length — 0 to 128

 

lsp-id [0..4294967295]
Clears information about the specified LSP ID.
lsp-ldp head—
Clears session information for the head of the LSP LDP link.
lsp-ldp tail—
Clears session information for the tail of the LSP LDP link.
lsp-rsvp {head | tail}
Clears information about the specified link type.
mpls-tp lsp-name
Clears information about the specified MPLS TP LSP.
p2mp-interface interface-name
Clears information about the specified P2MP interface.
path {working | protect}
Clears information about the working or protect path.
rsvp-session-name [256 chars max]
Clears information about the specified RSVP session.
src-ip ip-address
Clears information about the specified source IPv4 or IPv6 address.
tunnel-id [0..4294967295]
Clears information about the specified tunnel ID.

statistics

Syntax 
statistics lsp-ldp head ip-prefix/prefix-length src-ip ip-address
statistics lsp-ldp tail ip-prefix/prefix-length dst-ip ip-address
statistics src-ip ip-address dst-ip ip-address
statistics all
statistics src-ip ip-address dst-ip ip-address lsp-rsvp {head | tail} tunnel-id [0..4294967295] lsp-id [0..4294967295]
statistics mpls-tp lsp-name path {working | protect}
statistics p2mp-interface interface-name
statistics src-ip ip-address lsp-rsvp {head | tail} rsvp-session-name [256 chars max]
Context 
clear>router>bfd
Description 

This command clears BFD statistics.

Parameters 
all—
Clears all statistics for the BFD instance.
dst-ip ip-address
Clears statistics about the specified destination IPv4 or IPv6 address.
ip-prefix/prefix-length—
Clears statistics for the specified IP prefix.
Values—
ipv4-prefix — a.b.c.d
ipv4-prefix-length — 0 to 32
ipv6-prefix — x:x:x:x:x:x:x:x (eight 16-bit pieces)
                      x:x:x:x:x:x:d.d.d.d
                      x — 0 to FFFF (hexadecimal)
                      d — 0 to 255 (decimal)
ipv6-prefix-length — 0 to 128

 

lsp-id [0..4294967295]
Clears statistics about the specified LSP ID.
lsp-ldp head—
Clears statistics for the head of the LSP LDP link.
lsp-ldp tail—
Clears statistics for the tail of the LSP LDP link.
lsp-rsvp {head | tail}
Clears statistics about the specified link type.
mpls-tp lsp-name
Clears statistics about the specified MPLS TP LSP.
p2mp-interface interface-name
Clears statistics about the specified P2MP interface.
path {working | protect}
Clears statistics about the working or protect path.
rsvp-session-name [256 chars max]
Clears statistics about the specified RSVP session.
src-ip ip-address
Clears statistics about the specified source IPv4 or IPv6 address.
tunnel-id [0..4294967295]
Clears statistics about the specified tunnel ID.

interface

Syntax 
interface ip-int-name [statistics | aux-stats]
Context 
clear>router>mpls
Description 

This command resets or clears statistics for MPLS interfaces.

Parameters 
ip-int-name—
Specifies an existing IP interface. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.
statistics
Clears only packet and octet counters, and only these of the default MPLS statistics.
aux-stats
Clears only packet and octet counters, and only these of the default auxiliary MPLS statistics.

lsp

Syntax 
lsp lsp-name
Context 
clear>router>mpls
Description 

This command resets and restarts an LSP.

Parameters 
lsp-name—
Specifies the LSP to clear, up to 64 characters in length.

lsp-autobandwidth

Syntax 
lsp-autobandwidth [lsp-name]
Context 
clear>router>mpls>lsp
Description 

This command clears the following counters/timers, as follows:

  1. The sample count is reset to zero, and the average data rate of the current sample interval is discarded.
  2. The adjust count is reset to zero.
  3. The maximum average data rate is zeroed.
  4. The overflow count is zeroed.
Parameters 
lsp-name—
Specifies the LSP to clear, up to 64 characters in length.

lsp-egress-stats

Syntax 
lsp-egress-stats
lsp-egress-stats lsp-name
Context 
clear>router>mpls
Description 

This command clears MPLS LSP egress statistics information.

Parameters 
lsp-name—
Specifies the LSP to clear, up to 64 characters in length.

lsp-ingress-stats

Syntax 
lsp-ingress-stats
lsp-ingress-stats ip-address lsp lsp-name
lsp-ingress-stats sender-address:lsp-name
Context 
clear>router>mpls
Description 

This command clears MPLS LSP ingress statistics information.

interface

Syntax 
interface ip-int-name statistics
Context 
clear>router>rsvp
Description 

This command resets or clears statistics for an RSVP interface.

Parameters 
ip-int-name—
Specifies the IP interface to clear. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.
statistics
Clears only statistics.

statistics

Syntax 
statistics
Context 
clear>router>rsvp
Description 

This command clears global statistics for the RSVP instance, for example, clears path and resv timeout counters.

ingress-stats

Syntax 
ingress-statistics
Context 
clear>router>mpls
Description 

This command provides the context for the user to enter the LSP names for the purpose of enabling ingress data path statistics at the terminating node of the LSP (for example, egress LER).

2.16.2.7. Debug Commands

mpls

Syntax 
mpls [lsp lsp-name] [sender source-address] [endpoint endpoint-address] [tunnel-id tunnel-id] [lsp-id lsp-id] [interface ip-int-name]
no mpls
Context 
debug>router
Description 

This command enables and configures debugging for MPLS.

Parameters 
lsp lsp-name
Specifies the LSP name up to 64 characters in length.
sender source-address
Specifies the system IP address of the sender.
endpoint endpoint-address
Specifies the far-end system IP address.
tunnel-id tunnel-id
Specifies the MPLS SDP ID.
Values—
0 to 4294967295

 

lsp-id lsp-id
Specifies the LSP ID.
Values—
1 to 65535

 

interface ip-int-name
Specifies the interface. The interface name can be up to 32 characters long and must be unique. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.

event

Syntax 
[no] event
Context 
debug>router>mpls
debug>router>rsvp
Description 

This command enables debugging for specific events.

The no form of the command disables the debugging.

all

Syntax 
all [detail]
no all
Context 
debug>router>mpls>event
debug>router>rsvp>event
Description 

This command debugs all events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about all events.

frr

Syntax 
frr [detail]
no frr
Context 
debug>router>mpls>event
Description 

This command debugs fast re-route events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about re-route events.

iom

Syntax 
iom [detail]
no iom
Context 
debug>router>mpls>event
Description 

This command reports MPLS debug events originating from the XMA.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about MPLS events originating from the XMA.

lsp-setup

Syntax 
lsp-setup [detail]
no lsp-setup
Context 
debug>router>mpls>event
Description 

This command debugs LSP setup events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about LSP setup events.

mbb

Syntax 
mbb [detail]
no mbb
Context 
debug>router>mpls>event
Description 

This command debugs the state of the most recent invocation of the make-before-break (MBB) functionality.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about MBB events.

misc

Syntax 
misc [detail]
no misc
Context 
debug>router>mpls>event
debug>router>rsvp>event
Description 

This command debugs miscellaneous events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about miscellaneous events.

pcc

Syntax 
[no] pcc
Context 
debug>router>mpls>event
Description 

This command debugs pcc events.

The no form of the command disables the debugging.

te

Syntax 
[no] te
Context 
debug>router>mpls>event
Description 

This command debugs te events.

The no form of the command disables the debugging.

xc

Syntax 
xc [detail]
no xc
Context 
debug>router>mpls>event
Description 

This command debugs cross connect events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about cross connect events.

rsvp

Syntax 
rsvp [lsp lsp-name] [sender source-address] [endpoint endpoint-address] [tunnel-id tunnel-id] [lsp-id lsp-id] [interface ip-int-name]
no rsvp
Context 
debug>router
Description 

This command enables and configures debugging for RSVP.

Parameters 
lsp lsp-name
Specifies the LSP name up to 64 characters in length.
sender source-address
Specifies the system IP address of the sender.
endpoint endpoint-address
Specifies the far-end system IP address.
tunnel-id tunnel-id
Specifies the RSVP tunnel ID.
Values—
0 to 4294967295

 

lsp-id lsp-id
Specifies the LSP ID.
Values—
1 to 65535

 

interface ip-int-name
Specifies the interface name. The interface name can be up to 32 characters long and must be unique. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.

auth

Syntax 
[no] auth
Context 
debug>router>rsvp>event
Description 

This command debugs auth events.

The no form of the command disables the debugging.

nbr

Syntax 
nbr [detail]
no nbr
Context 
debug>router>rsvp>event
Description 

This command debugs neighbor events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about neighbor events.

path

Syntax 
path [detail]
no path
Context 
debug>router>rsvp>event
Description 

This command debugs path-related events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about path-related events.

resv

Syntax 
resv [detail]
no resv
Context 
debug>router>rsvp>event
Description 

This command debugs RSVP reservation events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about RSVP reservation events.

rr

Syntax 
[no] rr
Context 
debug>router>rsvp>event
Description 

This command debugs rr events.

The no form of the command disables the debugging.

te-threshold-update

Syntax 
te-threshold-update
no te-threshold-update
Context 
debug>router>rsvp>event
debug>router>rsvp>interface>event
Description 

This command debugs the TE threshold update and the dark bandwidth threshold events.

The no form of this command disables the debugging.

packet

Syntax 
[no] packet
Context 
debug>router>rsvp>
Description 

This command enters the syntax to debug packets.

ack

Syntax 
ack [detail]
no ack
Context 
debug>router>rsvp>packet
Description 

This command debugs ack events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about ack events.

all

Syntax 
all [detail]
no all
Context 
debug>router>rsvp>packet
Description 

This command debugs all packets.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about all RSVP packets.

bundle

Syntax 
bundle [detail]
no bundle
Context 
debug>router>rsvp>packet
Description 

This command debugs bundle events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about bundle events.

hello

Syntax 
hello [detail]
no hello
Context 
debug>router>rsvp>packet
Description 

This command debugs hello packets.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about hello packets.

path

Syntax 
path [detail]
no path
Context 
debug>router>rsvp>packet
Description 

This command enables debugging for RSVP path packets.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about path-related events.

patherr

Syntax 
patherr [detail]
no patherr
Context 
debug>router>rsvp>packet
Description 

This command debugs path error packets.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about path error packets.

pathtear

Syntax 
pathtear [detail]
no pathtear
Context 
debug>router>rsvp>packet
Description 

This command debugs path tear packets.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about path tear packets.

resv

Syntax 
resv [detail]
no resv
Context 
debug>router>rsvp>packet
Description 

This command enables debugging for RSVP resv packets.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about RSVP Resv events.

resverr

Syntax 
resverr [detail]
no resverr
Context 
debug>router>rsvp>packet
Description 

This command debugs ResvErr packets.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about ResvErr packets.

resvtear

Syntax 
resvtear [detail]
no resvtear
Context 
debug>router>rsvp>packet
Description 

This command debugs ResvTear packets.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about ResvTear packets.

srefresh

Syntax 
srefresh [detail]
no srefresh
Context 
debug>router>rsvp>packet
Description 

This command debugs srefresh packets.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about srefresh packets.