9.4. Show, Clear, and Debug Command Reference

9.4.1. Command Hierarchies

Show Commands

9.4.1.1. Show Commands

show

— router

— mcac

— if-policy [if-policy-name]

— if-policy if-policy-name users

— policy [policy-name [bundle bundle-name] [protocol protocol-name] [interface if-name] [detail]]

— statistics policy policy-name [bundle bundle-name] [protocol {igmp | pim | igmpSnpg | mld}]

— statistics

9.4.2. Command Descriptions

9.4.2.1. Show Commands

The command outputs in the following section are examples only; actual displays may differ depending on supported functionality and user configuration.

9.4.2.1.1. Show MCAC Commands

mcac

Syntax

mcac

Context

show>router

Description

This command enables the context to display multicast CAC related information.

if-policy

Syntax

if-policy [if-policy-name]

if-policy if-policy-name users

Context

show>router>mcac

Description

This command displays information about MCAC interface policies. Display options are:

no parameters: displays summary of configured MCAC interface policies in the system
if-policy-name: if an existing interface policy name is specified, the configuration and operational details for the specified policy are displayed
if-policy-name users: if user options is specified with the existing MCAC interface policy, then all instances where a given MCAC interface policy is used are listed

Output

Sample Output

*A:bkvm34>show>router>mcac# if-policy

===============================================================================

Multicast CAC If-Policies

===============================================================================

If-Policy Description

-------------------------------------------------------------------------------

if_poll test policy

if_poll2

-------------------------------------------------------------------------------

If-Policies : 2

===============================================================================

*A:bkvm34>show>router>mcac# if-policy "if_poll"

===============================================================================

Multicast CAC If-Policy

===============================================================================

If-Policy : if_poll

Description : test policy

Admin state : enabled

Unconstrained BW : 100000

Pre rsvd mand BW : 10000

In use mand BW : 0

In use opt BW : 0

Avail mand BW : 10000

Avail opt BW : 90000

===============================================================================

*A:bkvm34>show>router>mcac# if-policy "if_poll" users

===============================================================================

Multicast CAC If-Plcy if_pol1 Application Interfaces

===============================================================================

Application Service ID Interface

-------------------------------------------------------------------------------

IGMP 1 redir_itf1

IGMP 1 gi_1_1

MLD 1 redir_itf1

MLD 1 gi_1_1

IGMP 2 to_B2

MLD 2 to_B2

PIM 3 to_B3

-------------------------------------------------------------------------------

Application Interfaces : 7

===============================================================================

Multicast CAC If-Plcy if_pol1 Application Ports

===============================================================================

Application Service ID Sap/Sdp

-------------------------------------------------------------------------------

IGMP-Snpg 4 Sap:lag-1:4

IGMP-Snpg 5 Sdp:22:5

IGMP-Snpg 6 Sdp:23:6

IGMP-Snpg 7 Sap:lag-1:7

-------------------------------------------------------------------------------

Application Ports : 4

===============================================================================

policy

Syntax

policy [policy-name [bundle bundle-name] [protocol protocol-name] [interface if-name] [detail]]

Context

show>router>mcac

Description

This command displays MCAC policy information.

Parameters

policy-name—

Specifies an existing multicast CAC (MCAC) policy name.

bundle bundle-id—

Specifies an existing multicast bundle name.

protocol protocol-name—

specifies an applicable protocol to display.

Values—

igmp, pim, igmpSnpg

interface if-name—

Specifies an interface name to display.

detail—

Displays detailed information.

Output

Sample Output

*A:ALA-48>show>router>mcac# policy

===============================================================================

Multicast CAC Policies

===============================================================================

Policy Description

-------------------------------------------------------------------------------

btv_fr foreign TV offering

btv_vl eastern TV offering

policy1 this is policy1

policy2 this is policy 2

-------------------------------------------------------------------------------

Policies : 4

===============================================================================

*A:ALA-48>show>router>mcac#

*A:ALA-48>show>router>mcac# policy btv_fr

===============================================================================

Multicast CAC policy

===============================================================================

Policy : btv_fr

Description : foreign TV offering

Default Action : discard

Bundle(s) : FOR

===============================================================================

*A:ALA-48>show>router>mcac#

statistics

Syntax

statistics policy policy-name [bundle bundle-name] [protocol {igmp | pim | igmpSnpg | mld}]

statistics

Context

show>router>mcac

Description

This command displays MCAC statistics.

Parameters

policy-name—

Specifies an existing multicast CAC (MCAC) policy name.

bundle-name—

Displays statistics for the specified existing multicast bundle name.

protocol {igmp | pim | igmpSnpg | mld}—

Displays statistics for the specified applicable protocol.

Values—

igmp, pim, igmpSnpg, mld