Alcatel-Lucent 7705 SAR, Release 6.1.R4
  Legal Disclaimers
  Customer Documentation and Product Support
  Legal Disclaimers
  Customer Documentation and Product Support
7705 SAR Configuration Notes, Release 6.1
  Release 6.1 configuration notes
    BGP 3107 @ Layer 2: Inter-AS model C
    Hybrid Ports
    Internet Protocol Security (IPSec)
    NAT
    Proxy ARP
    Static LAG
  Release 6.0 configuration notes
    2-Port 10GigE Ring Card Configuration Notes
    Access DS1 MW-LINK Configuration Notes
    Access E1 MW-LINK Configuration Notes
    DHCP on Interface Configuration Notes
    Network HSSB MW-LINK Configuration Notes
    Multi Chassis LAG (MC-LAG) with PW Redundancy Configuration Notes
    Routed VPLS (R-VPLS) Configuration Notes
    Virtual Router Redundancy Protocol (VRRP) Configuration Notes
  Release 5.0 configuration notes
    8-port Voice & Teleprotection Card - FXS Interface
    8-port Voice & Teleprotection Card - ITU-T G.703
    DS3/E3: Channelization & Cpipe
    Fpipe Configuration Notes
    IEEE 1588v2-4: Enabling One Pulse-Per-Second
    Ipipe Configuration Notes
    MW-LINK Configuration Notes
    N-to-1 Apipe configuration with N > 1 & ATM Virtual Trunking
  Release 6.1 configuration notes
    BGP 3107 @ Layer 2: Inter-AS model C
    Hybrid Ports
    Internet Protocol Security (IPSec)
    NAT
    Proxy ARP
    Static LAG
  Release 6.0 configuration notes
    2-Port 10GigE Ring Card Configuration Notes
    Access DS1 MW-LINK Configuration Notes
    Access E1 MW-LINK Configuration Notes
    DHCP on Interface Configuration Notes
    Network HSSB MW-LINK Configuration Notes
    Multi Chassis LAG (MC-LAG) with PW Redundancy Configuration Notes
    Routed VPLS (R-VPLS) Configuration Notes
    Virtual Router Redundancy Protocol (VRRP) Configuration Notes
  Release 5.0 configuration notes
    8-port Voice & Teleprotection Card - FXS Interface
    8-port Voice & Teleprotection Card - ITU-T G.703
    DS3/E3: Channelization & Cpipe
    Fpipe Configuration Notes
    IEEE 1588v2-4: Enabling One Pulse-Per-Second
    Ipipe Configuration Notes
    MW-LINK Configuration Notes
    N-to-1 Apipe configuration with N > 1 & ATM Virtual Trunking
7705 SAR OS Basic System Configuration Guide R6.1.R4
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR System Configuration Process
  CLI Usage
    In This Chapter
    CLI Structure
    Navigating in the CLI
      CLI Contexts
      Basic CLI Commands
      CLI Environment Commands
      CLI Monitor Commands
    Getting Help in the CLI
    The CLI Command Prompt
    Displaying Configuration Contexts
    EXEC Files
    Entering CLI Commands
      Command Completion
      Unordered Parameters
      Editing Keystrokes
      Absolute Paths
      History
      Entering Numerical Ranges
      Pipe/Match
      Redirection
    Basic Command Reference
      Command Hierarchies
        Basic CLI Commands
        Environment Commands
        Monitor Commands
        Show Commands
      Command Descriptions
        Basic CLI Commands
        Environment Commands
        Monitor CLI Commands
        Show Commands
  File System Management
    In This Chapter
    The File System
      Compact Flash Device
      URLs
      Wildcards
    Common Configuration Tasks
      Modifying File Attributes
      Creating and Navigating Directories
      Copying Files
      Moving Files
      Deleting Files and Removing Directories
      Displaying Directory and File Information
      Repairing the File System
    File System Command Reference
      Command Hierarchy
        Configuration Commands
      Command Descriptions
        Configuration Commands
  Boot Options
    In This Chapter
    System Initialization
      Configuration and Image Loading
        Persistence
      Automatic Discovery Protocol
    Initial System Startup Process Overview
    Configuration Notes
      Reference Sources
    Configuring Boot File Options with CLI
    BOF Configuration Overview
    Basic BOF Configuration
    Common Configuration Tasks
      Searching for the BOF
      Accessing the CLI
        Console Connection
      Accessing the Management Port on a 7705 SAR-W
    Configuring BOF Parameters
    Service Management Tasks
      System Administration Commands
        Viewing the Current Configuration
        Modifying and Saving a Configuration
        Deleting BOF Parameters
        Saving a Configuration to a Different Filename
        Rebooting
    BOF Command Reference
      Command Hierarchies
        Configuration Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          File Management Commands
          BOF Processing Control Commands
          Console Port Configuration Commands
          Image and Configuration Management Commands
          CSM Management Configuration Commands
          DNS Configuration Commands
        Show Commands
  System Management
    In This Chapter
    System Management Parameters
      System Information
        System Name
        System Contact
        System Location
        System Coordinates
        Common Language Location Identifier
        PoE Power Source
      System Time
        Time Zones
        NTP
        SNTP Time Synchronization
        PTP
        GPS
        CRON
    High Availability
      High Availability Features
        Redundancy
          Software Redundancy
          Configuration Redundancy
          Component Redundancy
          Accounting Configuration Redundancy
          Multi-Chassis LAG Redundancy
        Nonstop Routing (NSR)
        In-service Upgrade
        CSM Switchover
        Synchronization
          Configuration and boot-env Synchronization
          State Database Synchronization
    CSM Synchronization and Redundancy
      Active and Standby Designations
      When the Active CSM Goes Offline
      Persistence
      Administrative Tasks
        Saving Configurations
        Specifying Post-Boot Configuration Files
      Automatic Synchronization
        Boot-Env Option
        Config Option
      Manual Synchronization
        Forcing a Switchover
    Node Timing
      External Timing Mode
      Line Timing Mode
      Adaptive Clock Recovery (ACR)
        ACR States
        ACR Statistics
      Differential Clock Recovery (DCR)
        DCR Frequencies
      Proprietary Clock Recovery (PCR)
      IEEE 1588v2 PTP
        PTP Clock Synchronization
        Performance Considerations
        PTP Capabilities
        PTP Ordinary Slave Clock For Frequency
        PTP Ordinary Master Clock For Frequency
        PTP Boundary Clock For Frequency
        PTP Ordinary Slave Clock for Time of Day/Phase Recovery
        PTP Boundary Clock for Time of Day/Phase Recovery
        PTP End-to-End Transparent Clock for Time of Day/Phase Recovery
        PTP Master Clock for Time of Day/Phase Distribution
        PTP Clock Redundancy
        PTP Statistics
      Network Timing Reference (NTR)
        NTR on xDSL Interfaces
        NTR on SHDSL Interfaces
      Synchronous Ethernet
      Synchronization Status Messaging with Quality Level Selection
        Timing Reference Selection Based on Quality Level
          SSM/ESMC QL Transmission
    System Configuration Process Overview
    Configuration Notes
      Reference Sources
    Configuring System Management with CLI
    System Management Configuration
      Saving Configurations
    Basic System Configuration
    Common Configuration Tasks
      System Information
        System Information Parameters
          Name
          Contact
          Location
          CLLI Code
          Coordinates
        System Time Elements
          Zone
          Summer Time Conditions
          NTP
          SNTP
          CRON
      Configuring Synchronization and Redundancy
        Configuring Synchronization
        Configuring Manual Synchronization
        Forcing a Switchover
        Configuring Synchronization Options
        Configuring Multi-Chassis Redundancy
      Configuring ATM Parameters
      Configuring Backup Copies
      Configuring System Administration Parameters
        Disconnect
        Set-time
        Display-config
        Tech-support
        Save
        Reboot
        Post-Boot Configuration Extension Files
          Show Command Output and Console Messages
      System Timing
        Entering Edit Mode
        Configuring Timing References
        Configuring IEEE 1588v2 PTP
        Configuring QL Values for SSM
        Using the Revert Command
        Other Editing Commands
        Forcing a Specific Reference
    Configuring System Monitoring Thresholds
      Creating Events
    Configuring LLDP
    System Command Reference
      Command Hierarchies
        Configuration Commands
          System Information and General Commands
          System Alarm Commands
          Persistence Commands
          System Time Commands
          CRON Commands
          System Synchronization Commands
          System LLDP Commands
          System PTP Commands
        Administration Commands
          System Administration Commands
          High Availability (Redundancy) Commands
        Show Commands
        Debug Commands
        Clear Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          System Information and General Commands
          System Alarm Commands
          Persistence Commands
          Date and Time Commands
          GPS System Time Commands
          Network Time Protocol Commands
          Simple Network Time Protocol Commands
          Time Zone Commands
          PTP System Time Commands
          CRON Commands
          System Synchronization Configuration Commands
          LLDP System Commands
          System PTP Commands
        Administration Commands
          System Administration Commands
          High Availability (Redundancy) Commands
        Show Commands
        Debug Commands
        Clear Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR System Configuration Process
  CLI Usage
    In This Chapter
    CLI Structure
    Navigating in the CLI
      CLI Contexts
      Basic CLI Commands
      CLI Environment Commands
      CLI Monitor Commands
    Getting Help in the CLI
    The CLI Command Prompt
    Displaying Configuration Contexts
    EXEC Files
    Entering CLI Commands
      Command Completion
      Unordered Parameters
      Editing Keystrokes
      Absolute Paths
      History
      Entering Numerical Ranges
      Pipe/Match
      Redirection
    Basic Command Reference
      Command Hierarchies
        Basic CLI Commands
        Environment Commands
        Monitor Commands
        Show Commands
      Command Descriptions
        Basic CLI Commands
        Environment Commands
        Monitor CLI Commands
        Show Commands
  File System Management
    In This Chapter
    The File System
      Compact Flash Device
      URLs
      Wildcards
    Common Configuration Tasks
      Modifying File Attributes
      Creating and Navigating Directories
      Copying Files
      Moving Files
      Deleting Files and Removing Directories
      Displaying Directory and File Information
      Repairing the File System
    File System Command Reference
      Command Hierarchy
        Configuration Commands
      Command Descriptions
        Configuration Commands
  Boot Options
    In This Chapter
    System Initialization
      Configuration and Image Loading
        Persistence
      Automatic Discovery Protocol
    Initial System Startup Process Overview
    Configuration Notes
      Reference Sources
    Configuring Boot File Options with CLI
    BOF Configuration Overview
    Basic BOF Configuration
    Common Configuration Tasks
      Searching for the BOF
      Accessing the CLI
        Console Connection
      Accessing the Management Port on a 7705 SAR-W
    Configuring BOF Parameters
    Service Management Tasks
      System Administration Commands
        Viewing the Current Configuration
        Modifying and Saving a Configuration
        Deleting BOF Parameters
        Saving a Configuration to a Different Filename
        Rebooting
    BOF Command Reference
      Command Hierarchies
        Configuration Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          File Management Commands
          BOF Processing Control Commands
          Console Port Configuration Commands
          Image and Configuration Management Commands
          CSM Management Configuration Commands
          DNS Configuration Commands
        Show Commands
  System Management
    In This Chapter
    System Management Parameters
      System Information
        System Name
        System Contact
        System Location
        System Coordinates
        Common Language Location Identifier
        PoE Power Source
      System Time
        Time Zones
        NTP
        SNTP Time Synchronization
        PTP
        GPS
        CRON
    High Availability
      High Availability Features
        Redundancy
          Software Redundancy
          Configuration Redundancy
          Component Redundancy
          Accounting Configuration Redundancy
          Multi-Chassis LAG Redundancy
        Nonstop Routing (NSR)
        In-service Upgrade
        CSM Switchover
        Synchronization
          Configuration and boot-env Synchronization
          State Database Synchronization
    CSM Synchronization and Redundancy
      Active and Standby Designations
      When the Active CSM Goes Offline
      Persistence
      Administrative Tasks
        Saving Configurations
        Specifying Post-Boot Configuration Files
      Automatic Synchronization
        Boot-Env Option
        Config Option
      Manual Synchronization
        Forcing a Switchover
    Node Timing
      External Timing Mode
      Line Timing Mode
      Adaptive Clock Recovery (ACR)
        ACR States
        ACR Statistics
      Differential Clock Recovery (DCR)
        DCR Frequencies
      Proprietary Clock Recovery (PCR)
      IEEE 1588v2 PTP
        PTP Clock Synchronization
        Performance Considerations
        PTP Capabilities
        PTP Ordinary Slave Clock For Frequency
        PTP Ordinary Master Clock For Frequency
        PTP Boundary Clock For Frequency
        PTP Ordinary Slave Clock for Time of Day/Phase Recovery
        PTP Boundary Clock for Time of Day/Phase Recovery
        PTP End-to-End Transparent Clock for Time of Day/Phase Recovery
        PTP Master Clock for Time of Day/Phase Distribution
        PTP Clock Redundancy
        PTP Statistics
      Network Timing Reference (NTR)
        NTR on xDSL Interfaces
        NTR on SHDSL Interfaces
      Synchronous Ethernet
      Synchronization Status Messaging with Quality Level Selection
        Timing Reference Selection Based on Quality Level
          SSM/ESMC QL Transmission
    System Configuration Process Overview
    Configuration Notes
      Reference Sources
    Configuring System Management with CLI
    System Management Configuration
      Saving Configurations
    Basic System Configuration
    Common Configuration Tasks
      System Information
        System Information Parameters
          Name
          Contact
          Location
          CLLI Code
          Coordinates
        System Time Elements
          Zone
          Summer Time Conditions
          NTP
          SNTP
          CRON
      Configuring Synchronization and Redundancy
        Configuring Synchronization
        Configuring Manual Synchronization
        Forcing a Switchover
        Configuring Synchronization Options
        Configuring Multi-Chassis Redundancy
      Configuring ATM Parameters
      Configuring Backup Copies
      Configuring System Administration Parameters
        Disconnect
        Set-time
        Display-config
        Tech-support
        Save
        Reboot
        Post-Boot Configuration Extension Files
          Show Command Output and Console Messages
      System Timing
        Entering Edit Mode
        Configuring Timing References
        Configuring IEEE 1588v2 PTP
        Configuring QL Values for SSM
        Using the Revert Command
        Other Editing Commands
        Forcing a Specific Reference
    Configuring System Monitoring Thresholds
      Creating Events
    Configuring LLDP
    System Command Reference
      Command Hierarchies
        Configuration Commands
          System Information and General Commands
          System Alarm Commands
          Persistence Commands
          System Time Commands
          CRON Commands
          System Synchronization Commands
          System LLDP Commands
          System PTP Commands
        Administration Commands
          System Administration Commands
          High Availability (Redundancy) Commands
        Show Commands
        Debug Commands
        Clear Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          System Information and General Commands
          System Alarm Commands
          Persistence Commands
          Date and Time Commands
          GPS System Time Commands
          Network Time Protocol Commands
          Simple Network Time Protocol Commands
          Time Zone Commands
          PTP System Time Commands
          CRON Commands
          System Synchronization Configuration Commands
          LLDP System Commands
          System PTP Commands
        Administration Commands
          System Administration Commands
          High Availability (Redundancy) Commands
        Show Commands
        Debug Commands
        Clear Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
7705 SAR OS Interface Configuration Guide R6.1.R4
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR Interface Configuration Process
  7705 SAR Interfaces
    In This Chapter
    Configuration Overview
      Configuring the IOM and Card Slot
      Configuring Adapter Cards and Modules
        Channelized Adapter Card Support
          PPP Over Fractional T1/E1
      Configuring Ports
        Ethernet
          8-port Ethernet Adapter Card
          8-port Gigabit Ethernet Adapter Card
          10-port 1GigE/1-port 10GigE X-Adapter Card
          2-port 10GigE (Ethernet) Adapter Card/Module
          Packet Microwave Adapter Card
        TDM
          16-port T1/E1 ASAP Adapter Card
          32-port T1/E1 ASAP Adapter Card
          2-port OC3/STM1 Channelized Adapter Card
          4-port OC3/STM1 Channelized Adapter Card
          4-port T1/E1 and RS-232 Combination Module
          4-port DS3/E3 Adapter Card
          8-port Voice & Teleprotection Card
        Serial (TDM)
        Multilink Bundles
        IMA
        SONET/SDH
        Voice
          6-port E&M Adapter Card
          8-port Voice & Teleprotection Card
          8-port FXO Adapter Card
          6-port FXS Adapter Card
        Microwave Link
        Port Identifiers
        Access, Network, and Hybrid Ports
          Rate Limiting
          Access Ports
          Network Ports
          Hybrid Ports
      Configuring SCADA Bridges
    Port Features
      Multilink Point-to-Point Protocol
        Protocol Field (PID)
        B&E Bits
        Sequence Number
        Information Field
        Padding
        FCS
        LCP
        T1/E1 Link Hold Timers
      Multi-Class MLPPP
        QoS in MC-MLPPP
      cHDLC
        SLARP
      Inverse Multiplexing Over ATM (IMA)
      Network Synchronization on Ports and Circuits
        Network Synchronization on T1/E1, Ethernet, GPON, and DSL Ports
        Network Synchronization on SONET/SDH Ports
        Network Synchronization on DS3/E3 Ports
        Network Synchronization on DS3 CES Circuits
        Network Synchronization on T1/E1 Ports and Circuits
      Node Synchronization From GPS RF Ports
      Flow Control on Ethernet Ports
      Ethernet OAM
        Remote Loopback
        802.3ah OAMPDU Tunneling and Termination for Epipe Service
        Dying Gasp
      Ethernet Loopbacks
        Line and Internal Ethernet Loopbacks
          MAC Swapping
          Interaction of Ethernet Port Loopback with Other Features
        CFM Loopbacks for OAM on Ethernet Ports
          CFM Loopback Mechanics
      Ethernet Port Down-When-Looped
      Ethernet Ring
      MTU Configuration Guidelines
        IP Fragmentation
        Jumbo Frames
          Behavior of Adapter Cards Not Supporting Jumbo Frames on 7705 SAR-8 and 7705 SAR-18 only
          Jumbo Frame Behavior on the 7705 SAR-A, 7705 SAR-H, 7705 SAR-Hc, 7705 SAR-M, 7705 SAR-W, and 7705 SAR-Wx
          Multicast Support for Jumbo Frames
          PMC Jumbo Frame Support
        Default Port MTU Values
      LAG
        LAG Subgroups
        Access Ingress Fabric Shaping
        Multi-Chassis LAG
        Static LAG (Active/Standby LAG Operation without LACP)
      ECMP Support on the 7705 SAR
        LDP ECMP on Ingress Label Edge Routers (iLERs)
        LDP ECMP on LSR
          LSR Label-only Hash
          LSR Label-IP Hash
        IP ECMP under GRT
        IP ECMP under IP-VPN
        Optional Layer 4 Load Balancing
        Optional TEID Hashing for GTP-encapsulated Traffic
        Enabling ECMP
      Automatic Protection Switching
        SC-APS
        MC-APS
          MC-APS and Inter-Chassis Backup
        K1 and K2 bytes
          Bidirectional 1+1 APS example
        Revertive Mode
        APS Tools Commands
          Lockout Protection
          Request Switch of Active to Protection
          Request Switch of Active to Working
          Forced Switch of Working to Protection
          Forced Switch of Active to Working
          Exercise
        APS Failure Codes
          Protection Switching Byte Failure (APS-PSB)
          Channel Mismatch Failure (APS-CM)
          APS Mode Mismatch Failure (APS-MM)
          Far-End Protection Line Failure (APS-FEPL)
      Deploying Preprovisioned Components
      Microwave Link
        Standalone Mode
        Single NE Mode
          Single NE Management
          Microwave Link Fast Fault Detection (FFD)
          1+1 HSB
          1+1 Switching Operation
        Frequency Synchronization
        Migration from Standalone Mode to Single NE Mode
      DSL Bonding
        ATM Bonding
        PTM Bonding
        Pairs Within a Bonded Group
        Configuration
        Layer 3 Protocol Support and Service Provisioning
      Custom Alarms on Ethernet Ports
    802.1x Network Access Control
      802.1x Basics
      802.1x Modes
      802.1x Timers
      802.1x Configuration and Limitations
    Link Layer Discovery Protocol (LLDP)
      LLDP Protocol Features
    Surveillance, Control, and Data Acquisition (SCADA) Support
      Multi-Drop Data Bridge
    Configuration Notes
      Reference Sources
    Configuring Physical Components with CLI
    Preprovisioning Guidelines
      Predefining Entities
      Preprovisioning a Port or SCADA Bridge
      Maximizing Bandwidth Use
      Using Partial Bandwidth
    Basic Configuration
    Common Configuration Tasks
      Configuring Cards and Adapter Cards
        Configuring Cards
        Configuring Adapter Card Network Queue QoS Policies
        Configuring Ring Adapter Card or Module Network and Network Queue QoS Policies
        Configuring Adapter Card Fabric Statistics
        Configuring Adapter Card Fabric Profile
        Configuring Adapter Card Clock Mode
        Configuring Adapter Card Voice Attributes
        Configuring Ring Adapter Card or Module Parameters
        Configuring Auxiliary Alarm Card, Chassis, and Ethernet Port External Alarm Parameters
        Displaying Adapter Card Information
      Configuring Ports
        Configuring APS Port Parameters
        Configuring a Microwave Link
        Configuring Ethernet Port Parameters
          Configuring an Ethernet Network Port
          Configuring an Ethernet Access Port
          Configuring a Hybrid Ethernet Port
          Configuring 802.1x Authentication Port Parameters
        Configuring DSL Module Port Parameters
          Configuring a DSL Module Network Port
          Configuring a DSL Module Access Port
        Configuring SONET/SDH Port Parameters
          Configuring a SONET/SDH Access Port
          Configuring a SONET/SDH Network Port
        Configuring Voice Ports
        Configuring Teleprotection Ports
        Configuring TDM PPP
        Configuring Channelized Ports
          Verifying the Adapter Card Type
        Configuring Fractional T1/E1 Ports for PPP Encapsulation
        Configuring T1 Line Buildout
        Configuring TDM E1 SSM
        Configuring ATM Interface Parameters
          ATM Interface Commands
        Configuring Multilink PPP Bundles
        Configuring MC-MLPPP
        Configuring LAG Parameters
        Configuring Multilink ATM Inverse Multiplexing (IMA) Groups
          Configuring IMA Groups
          Configuration Notes for IMA Groups
          IMA Test Procedure
        Configuring SDI Ports for IPCP Encapsulation
        Configuring TDM and SDI Ports for Frame Relay Encapsulation
        Configuring TDM and SDI Ports for HDLC Encapsulation
        Configuring TDM and SDI Ports for Cisco HDLC Encapsulation
        Configuring GPS RF Port Parameters
      Configuring SCADA Bridge Parameters
    Service Management Tasks
      Modifying or Deleting an Adapter Card
      Deleting a Card
      Deleting Port Parameters
    Card, Adapter Card, and Port Command Reference
      Command Hierarchies
        Configuration Commands
          Card Commands
          Adapter Card Commands
          External Alarm Commands
          APS Port Commands
          Microwave Link Commands
          Port Configuration Commands
          Ethernet Commands
          DSL Commands
          GPON Commands
          GPS Commands
          IEEE 802.1x Ethernet Port Commands
          LLDP Ethernet Port Commands
          Ring Virtual Port Ethernet Commands
          Ring MAC Operations Commands
          Multilink Bundle and IMA Group Commands
          Serial Commands
          SONET/SDH Commands
          TDM Commands
          DS1 Commands
          DS3 Commands
          E1 Commands
          E3 Commands
          Voice Commands
          LAG Commands
          SCADA Commands
        Show Commands
        Monitor Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Card Commands
          Adapter Card Commands
          Interface QoS Commands
          External Alarm Commands
          APS Port Commands
          Microwave Link Commands
          General Port Commands
          Ethernet Commands
          DSL Commands
          GPON Commands
          GPS Commands
          IEEE 802.1x Ethernet Port Commands
          LLDP Ethernet Port Commands
          Ring MAC Operations Commands
          Serial Commands
          RS-232, V.35, and X.21 Channel Group Commands
          SONET/SDH Port Commands
          SONET/SDH Path Commands
          Network Port Commands
          Multilink Bundle and IMA Group Commands
          ATM Interface Commands
          TDM Commands
          DS1 and E1 Commands
          DS1 and E1 Channel Group Commands
          DS3 and E3 Commands
          Voice Commands
          Voice Channel Group Commands
          LAG Commands
          Frame Relay Commands
          Cisco HDLC Commands
          SCADA Commands
        Show Commands
          Show APS Commands
          Show Card Commands
          Show External Alarms Commands
          Show Microwave Link Commands
          Show Port Commands
          Show ATM Port Commands
          Show Port-tree Commands
          Show LAG Commands
          Show Multilink Bundle and IMA Group Commands
          Show ATM IMA Group Commands
          Show SCADA Commands
        Monitor Commands
          Port Monitor Commands
          Fabric Profile Statistics Monitor Commands
          SCADA Monitor Commands
        Clear Commands
        Debug Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR Interface Configuration Process
  7705 SAR Interfaces
    In This Chapter
    Configuration Overview
      Configuring the IOM and Card Slot
      Configuring Adapter Cards and Modules
        Channelized Adapter Card Support
          PPP Over Fractional T1/E1
      Configuring Ports
        Ethernet
          8-port Ethernet Adapter Card
          8-port Gigabit Ethernet Adapter Card
          10-port 1GigE/1-port 10GigE X-Adapter Card
          2-port 10GigE (Ethernet) Adapter Card/Module
          Packet Microwave Adapter Card
        TDM
          16-port T1/E1 ASAP Adapter Card
          32-port T1/E1 ASAP Adapter Card
          2-port OC3/STM1 Channelized Adapter Card
          4-port OC3/STM1 Channelized Adapter Card
          4-port T1/E1 and RS-232 Combination Module
          4-port DS3/E3 Adapter Card
          8-port Voice & Teleprotection Card
        Serial (TDM)
        Multilink Bundles
        IMA
        SONET/SDH
        Voice
          6-port E&M Adapter Card
          8-port Voice & Teleprotection Card
          8-port FXO Adapter Card
          6-port FXS Adapter Card
        Microwave Link
        Port Identifiers
        Access, Network, and Hybrid Ports
          Rate Limiting
          Access Ports
          Network Ports
          Hybrid Ports
      Configuring SCADA Bridges
    Port Features
      Multilink Point-to-Point Protocol
        Protocol Field (PID)
        B&E Bits
        Sequence Number
        Information Field
        Padding
        FCS
        LCP
        T1/E1 Link Hold Timers
      Multi-Class MLPPP
        QoS in MC-MLPPP
      cHDLC
        SLARP
      Inverse Multiplexing Over ATM (IMA)
      Network Synchronization on Ports and Circuits
        Network Synchronization on T1/E1, Ethernet, GPON, and DSL Ports
        Network Synchronization on SONET/SDH Ports
        Network Synchronization on DS3/E3 Ports
        Network Synchronization on DS3 CES Circuits
        Network Synchronization on T1/E1 Ports and Circuits
      Node Synchronization From GPS RF Ports
      Flow Control on Ethernet Ports
      Ethernet OAM
        Remote Loopback
        802.3ah OAMPDU Tunneling and Termination for Epipe Service
        Dying Gasp
      Ethernet Loopbacks
        Line and Internal Ethernet Loopbacks
          MAC Swapping
          Interaction of Ethernet Port Loopback with Other Features
        CFM Loopbacks for OAM on Ethernet Ports
          CFM Loopback Mechanics
      Ethernet Port Down-When-Looped
      Ethernet Ring
      MTU Configuration Guidelines
        IP Fragmentation
        Jumbo Frames
          Behavior of Adapter Cards Not Supporting Jumbo Frames on 7705 SAR-8 and 7705 SAR-18 only
          Jumbo Frame Behavior on the 7705 SAR-A, 7705 SAR-H, 7705 SAR-Hc, 7705 SAR-M, 7705 SAR-W, and 7705 SAR-Wx
          Multicast Support for Jumbo Frames
          PMC Jumbo Frame Support
        Default Port MTU Values
      LAG
        LAG Subgroups
        Access Ingress Fabric Shaping
        Multi-Chassis LAG
        Static LAG (Active/Standby LAG Operation without LACP)
      ECMP Support on the 7705 SAR
        LDP ECMP on Ingress Label Edge Routers (iLERs)
        LDP ECMP on LSR
          LSR Label-only Hash
          LSR Label-IP Hash
        IP ECMP under GRT
        IP ECMP under IP-VPN
        Optional Layer 4 Load Balancing
        Optional TEID Hashing for GTP-encapsulated Traffic
        Enabling ECMP
      Automatic Protection Switching
        SC-APS
        MC-APS
          MC-APS and Inter-Chassis Backup
        K1 and K2 bytes
          Bidirectional 1+1 APS example
        Revertive Mode
        APS Tools Commands
          Lockout Protection
          Request Switch of Active to Protection
          Request Switch of Active to Working
          Forced Switch of Working to Protection
          Forced Switch of Active to Working
          Exercise
        APS Failure Codes
          Protection Switching Byte Failure (APS-PSB)
          Channel Mismatch Failure (APS-CM)
          APS Mode Mismatch Failure (APS-MM)
          Far-End Protection Line Failure (APS-FEPL)
      Deploying Preprovisioned Components
      Microwave Link
        Standalone Mode
        Single NE Mode
          Single NE Management
          Microwave Link Fast Fault Detection (FFD)
          1+1 HSB
          1+1 Switching Operation
        Frequency Synchronization
        Migration from Standalone Mode to Single NE Mode
      DSL Bonding
        ATM Bonding
        PTM Bonding
        Pairs Within a Bonded Group
        Configuration
        Layer 3 Protocol Support and Service Provisioning
      Custom Alarms on Ethernet Ports
    802.1x Network Access Control
      802.1x Basics
      802.1x Modes
      802.1x Timers
      802.1x Configuration and Limitations
    Link Layer Discovery Protocol (LLDP)
      LLDP Protocol Features
    Surveillance, Control, and Data Acquisition (SCADA) Support
      Multi-Drop Data Bridge
    Configuration Notes
      Reference Sources
    Configuring Physical Components with CLI
    Preprovisioning Guidelines
      Predefining Entities
      Preprovisioning a Port or SCADA Bridge
      Maximizing Bandwidth Use
      Using Partial Bandwidth
    Basic Configuration
    Common Configuration Tasks
      Configuring Cards and Adapter Cards
        Configuring Cards
        Configuring Adapter Card Network Queue QoS Policies
        Configuring Ring Adapter Card or Module Network and Network Queue QoS Policies
        Configuring Adapter Card Fabric Statistics
        Configuring Adapter Card Fabric Profile
        Configuring Adapter Card Clock Mode
        Configuring Adapter Card Voice Attributes
        Configuring Ring Adapter Card or Module Parameters
        Configuring Auxiliary Alarm Card, Chassis, and Ethernet Port External Alarm Parameters
        Displaying Adapter Card Information
      Configuring Ports
        Configuring APS Port Parameters
        Configuring a Microwave Link
        Configuring Ethernet Port Parameters
          Configuring an Ethernet Network Port
          Configuring an Ethernet Access Port
          Configuring a Hybrid Ethernet Port
          Configuring 802.1x Authentication Port Parameters
        Configuring DSL Module Port Parameters
          Configuring a DSL Module Network Port
          Configuring a DSL Module Access Port
        Configuring SONET/SDH Port Parameters
          Configuring a SONET/SDH Access Port
          Configuring a SONET/SDH Network Port
        Configuring Voice Ports
        Configuring Teleprotection Ports
        Configuring TDM PPP
        Configuring Channelized Ports
          Verifying the Adapter Card Type
        Configuring Fractional T1/E1 Ports for PPP Encapsulation
        Configuring T1 Line Buildout
        Configuring TDM E1 SSM
        Configuring ATM Interface Parameters
          ATM Interface Commands
        Configuring Multilink PPP Bundles
        Configuring MC-MLPPP
        Configuring LAG Parameters
        Configuring Multilink ATM Inverse Multiplexing (IMA) Groups
          Configuring IMA Groups
          Configuration Notes for IMA Groups
          IMA Test Procedure
        Configuring SDI Ports for IPCP Encapsulation
        Configuring TDM and SDI Ports for Frame Relay Encapsulation
        Configuring TDM and SDI Ports for HDLC Encapsulation
        Configuring TDM and SDI Ports for Cisco HDLC Encapsulation
        Configuring GPS RF Port Parameters
      Configuring SCADA Bridge Parameters
    Service Management Tasks
      Modifying or Deleting an Adapter Card
      Deleting a Card
      Deleting Port Parameters
    Card, Adapter Card, and Port Command Reference
      Command Hierarchies
        Configuration Commands
          Card Commands
          Adapter Card Commands
          External Alarm Commands
          APS Port Commands
          Microwave Link Commands
          Port Configuration Commands
          Ethernet Commands
          DSL Commands
          GPON Commands
          GPS Commands
          IEEE 802.1x Ethernet Port Commands
          LLDP Ethernet Port Commands
          Ring Virtual Port Ethernet Commands
          Ring MAC Operations Commands
          Multilink Bundle and IMA Group Commands
          Serial Commands
          SONET/SDH Commands
          TDM Commands
          DS1 Commands
          DS3 Commands
          E1 Commands
          E3 Commands
          Voice Commands
          LAG Commands
          SCADA Commands
        Show Commands
        Monitor Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Card Commands
          Adapter Card Commands
          Interface QoS Commands
          External Alarm Commands
          APS Port Commands
          Microwave Link Commands
          General Port Commands
          Ethernet Commands
          DSL Commands
          GPON Commands
          GPS Commands
          IEEE 802.1x Ethernet Port Commands
          LLDP Ethernet Port Commands
          Ring MAC Operations Commands
          Serial Commands
          RS-232, V.35, and X.21 Channel Group Commands
          SONET/SDH Port Commands
          SONET/SDH Path Commands
          Network Port Commands
          Multilink Bundle and IMA Group Commands
          ATM Interface Commands
          TDM Commands
          DS1 and E1 Commands
          DS1 and E1 Channel Group Commands
          DS3 and E3 Commands
          Voice Commands
          Voice Channel Group Commands
          LAG Commands
          Frame Relay Commands
          Cisco HDLC Commands
          SCADA Commands
        Show Commands
          Show APS Commands
          Show Card Commands
          Show External Alarms Commands
          Show Microwave Link Commands
          Show Port Commands
          Show ATM Port Commands
          Show Port-tree Commands
          Show LAG Commands
          Show Multilink Bundle and IMA Group Commands
          Show ATM IMA Group Commands
          Show SCADA Commands
        Monitor Commands
          Port Monitor Commands
          Fabric Profile Statistics Monitor Commands
          SCADA Monitor Commands
        Clear Commands
        Debug Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
7705 SAR OS MPLS Guide R6.1.R4
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR MPLS Configuration Process
  MPLS and RSVP-TE
    In This Chapter
    Overview
    MPLS
      Traffic Engineering for MPLS
        TE Metric and IGP Metric
      MPLS Label Stack
        Label Values
      Label Edge and Label Switch Routers
      LSP Types
    RSVP and RSVP-TE
      RSVP-TE Overview
        Using RSVP-TE for MPLS
        RSVP-TE Extensions for MPLS
        Hello Protocol
        MD5 Authentication of RSVP-TE Interface
    RSVP-TE Signaling
      General Attributes of RSVP-TE
        Authentication
        OAM: BFD
        Timers
        LSP Resignal Limit
        RSVP-TE Message Pacing
        RSVP-TE Overhead Refresh Reduction
        RSVP-TE Reservation Styles
    LSP Redundancy
    Fast Reroute (FRR)
      FRR Terminology
      FRR Behavior
      Dynamic and Manual Bypass LSPs
        Bypass LSP Selection Rules for the PLR
        FRR Node Protection (Facility Backup)
    Shared Risk Link Groups
      SRLGs for Secondary LSP Paths
      SRLGs for FRR LSP Paths
      Disjoint and Non-disjoint Paths
      Enabling Disjoint Backup Paths
    RSVP-TE Graceful Shutdown
    MPLS Service Usage
      Service Destination Points
    MPLS and RSVP-TE Configuration Process Overview
    Configuration Notes
      Reference Sources
    Configuring MPLS and RSVP-TE with CLI
    MPLS Configuration Overview
      Router Interface
        E-LSP for Differentiated Services
      Paths
      LSPs
      Pseudowires
      Signaling Protocol
    Basic MPLS Configuration
    Common Configuration Tasks
      Configuring MPLS Components
      Configuring Global MPLS Parameters
      Configuring an MPLS Interface
      Configuring MPLS Paths
      Configuring an MPLS LSP
      Configuring a Static LSP
        Configuring a Fast-Retry Timer for Static LSPs
      Configuring Manual Bypass Tunnels
      Configuring RSVP-TE Parameters
      Configuring RSVP-TE Message Pacing Parameters
    MPLS Configuration Management Tasks
      Deleting MPLS
      Modifying MPLS Parameters
      Modifying an MPLS LSP
      Modifying MPLS Path Parameters
      Modifying MPLS Static LSP Parameters
      Deleting an MPLS Interface
    RSVP-TE Configuration Management Tasks
      Modifying RSVP-TE Parameters
      Modifying RSVP-TE Message Pacing Parameters
      Deleting an Interface from RSVP-TE
    MPLS and RSVP-TE Command Reference
      Command Hierarchies
        MPLS Commands
        RSVP-TE Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        Configuration Commands (MPLS)
          Generic Commands
          Interface Commands
          Interface Label-Map Commands
          LSP Commands
          Primary and Secondary Path Commands
          LSP Path Commands
          Static LSP Commands
        Configuration Commands (RSVP-TE)
          Generic Commands
          Interface Commands
          Message Pacing Commands
        Show Commands (MPLS)
        Show Commands (RSVP)
        Clear Commands
        Debug Commands
  Label Distribution Protocol
    In This Chapter
    Label Distribution Protocol
      LDP and MPLS
        BFD for T-LDP
      LDP Architecture
      LDP Subsystem Interrelationships
        Memory Manager and LDP
        Label Manager
        LDP Configuration
        Logger
        Service Manager
      Execution Flow
        Initialization
        Session Lifetime
          Adjacency Establishment
          Session Establishment
      Label Exchange
        Other Reasons for Label Actions
        Cleanup
      LDP Filters
      Multi-area and Multi-instance Extensions to LDP
      ECMP Support for LDP
        Label Operations
      Graceful Restart Helper
    LDP Process Overview
    Configuration Notes
      Reference Sources
    Configuring LDP with CLI
    LDP Configuration Overview
    Basic LDP Configuration
    Common Configuration Tasks
      Enabling LDP
      Configuring Graceful Restart Helper Parameters
      Applying Import and Export Policies
      Configuring Interface Parameters
      Specifying Targeted Session Parameters
      Specifying Peer Parameters
      Enabling LDP Signaling and Services
    LDP Configuration Management Tasks
      Disabling LDP
      Modifying Targeted Session Parameters
      Modifying Interface Parameters
    LDP Command Reference
      Command Hierarchies
        LDP Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          LDP Global Commands
          Interface Parameters Commands
          Targeted Session Commands
          Peer Parameters Commands
        Show Commands
        Clear Commands
        Debug Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR MPLS Configuration Process
  MPLS and RSVP-TE
    In This Chapter
    Overview
    MPLS
      Traffic Engineering for MPLS
        TE Metric and IGP Metric
      MPLS Label Stack
        Label Values
      Label Edge and Label Switch Routers
      LSP Types
    RSVP and RSVP-TE
      RSVP-TE Overview
        Using RSVP-TE for MPLS
        RSVP-TE Extensions for MPLS
        Hello Protocol
        MD5 Authentication of RSVP-TE Interface
    RSVP-TE Signaling
      General Attributes of RSVP-TE
        Authentication
        OAM: BFD
        Timers
        LSP Resignal Limit
        RSVP-TE Message Pacing
        RSVP-TE Overhead Refresh Reduction
        RSVP-TE Reservation Styles
    LSP Redundancy
    Fast Reroute (FRR)
      FRR Terminology
      FRR Behavior
      Dynamic and Manual Bypass LSPs
        Bypass LSP Selection Rules for the PLR
        FRR Node Protection (Facility Backup)
    Shared Risk Link Groups
      SRLGs for Secondary LSP Paths
      SRLGs for FRR LSP Paths
      Disjoint and Non-disjoint Paths
      Enabling Disjoint Backup Paths
    RSVP-TE Graceful Shutdown
    MPLS Service Usage
      Service Destination Points
    MPLS and RSVP-TE Configuration Process Overview
    Configuration Notes
      Reference Sources
    Configuring MPLS and RSVP-TE with CLI
    MPLS Configuration Overview
      Router Interface
        E-LSP for Differentiated Services
      Paths
      LSPs
      Pseudowires
      Signaling Protocol
    Basic MPLS Configuration
    Common Configuration Tasks
      Configuring MPLS Components
      Configuring Global MPLS Parameters
      Configuring an MPLS Interface
      Configuring MPLS Paths
      Configuring an MPLS LSP
      Configuring a Static LSP
        Configuring a Fast-Retry Timer for Static LSPs
      Configuring Manual Bypass Tunnels
      Configuring RSVP-TE Parameters
      Configuring RSVP-TE Message Pacing Parameters
    MPLS Configuration Management Tasks
      Deleting MPLS
      Modifying MPLS Parameters
      Modifying an MPLS LSP
      Modifying MPLS Path Parameters
      Modifying MPLS Static LSP Parameters
      Deleting an MPLS Interface
    RSVP-TE Configuration Management Tasks
      Modifying RSVP-TE Parameters
      Modifying RSVP-TE Message Pacing Parameters
      Deleting an Interface from RSVP-TE
    MPLS and RSVP-TE Command Reference
      Command Hierarchies
        MPLS Commands
        RSVP-TE Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        Configuration Commands (MPLS)
          Generic Commands
          Interface Commands
          Interface Label-Map Commands
          LSP Commands
          Primary and Secondary Path Commands
          LSP Path Commands
          Static LSP Commands
        Configuration Commands (RSVP-TE)
          Generic Commands
          Interface Commands
          Message Pacing Commands
        Show Commands (MPLS)
        Show Commands (RSVP)
        Clear Commands
        Debug Commands
  Label Distribution Protocol
    In This Chapter
    Label Distribution Protocol
      LDP and MPLS
        BFD for T-LDP
      LDP Architecture
      LDP Subsystem Interrelationships
        Memory Manager and LDP
        Label Manager
        LDP Configuration
        Logger
        Service Manager
      Execution Flow
        Initialization
        Session Lifetime
          Adjacency Establishment
          Session Establishment
      Label Exchange
        Other Reasons for Label Actions
        Cleanup
      LDP Filters
      Multi-area and Multi-instance Extensions to LDP
      ECMP Support for LDP
        Label Operations
      Graceful Restart Helper
    LDP Process Overview
    Configuration Notes
      Reference Sources
    Configuring LDP with CLI
    LDP Configuration Overview
    Basic LDP Configuration
    Common Configuration Tasks
      Enabling LDP
      Configuring Graceful Restart Helper Parameters
      Applying Import and Export Policies
      Configuring Interface Parameters
      Specifying Targeted Session Parameters
      Specifying Peer Parameters
      Enabling LDP Signaling and Services
    LDP Configuration Management Tasks
      Disabling LDP
      Modifying Targeted Session Parameters
      Modifying Interface Parameters
    LDP Command Reference
      Command Hierarchies
        LDP Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          LDP Global Commands
          Interface Parameters Commands
          Targeted Session Commands
          Peer Parameters Commands
        Show Commands
        Clear Commands
        Debug Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
7705 SAR OS OAM and Diagnostics Guide R6.1.R4
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR OAM Configuration Process
  OAM and SAA
    In This Chapter
    OAM Overview
      ICMP and ICMPv6 Diagnostics
        Ping
        Traceroute
      Two-Way Active Measurement Protocol
        7705 SAR support for TWAMP server
          Interactions with Ethernet Loopback
          Limitations
      LSP Diagnostics
        LSP Ping
        LSP Traceroute
        LSP Ping and LSP Traceroute for BGP Route Tunnels
          TC Handling on BGP Route Tunnels
          BGP Route Tunnel Traceroute
          Traceroute TTL for Self-generated Traffic
      SDP Diagnostics
        SDP Ping
        SDP MTU Path Discovery
      Service Diagnostics
        Service Ping
      VLL Diagnostics
        VCCV Ping
          VCCV Ping Application
          VCCV Ping in a Multi-Segment Pseudowire
          Automated VCCV Trace Capability for Multi-Segment Pseudowire
          VCCV for Static Pseudowire Segments
          VCCV for MS-PW and Pseudowire Redundancy
          Detailed VCCV Trace Operation
        VCCV Trace
      VPLS MAC Diagnostics
        MAC Ping
        MAC Trace
        CPE Ping
        MAC Populate
        MAC Purge
      Ethernet OAM Capabilities
        Ethernet OAM Overview
          Ethernet OAM Usage Examples
        802.1ag and Y.1731 Functional Comparison
        ETH-CFM Ethernet OAM Tests (802.1ag and Y.1731)
          Hold MEP Up On Failure
          Loopback (LB)
          Linktrace (LT)
          Throughput Measurement
          Continuity Check (CC)
          ETH-RDI
          ETH-AIS
          ETH-Test
        ITU-T Y.1731 Performance Monitoring (PM)
          Delay and Delay Variation Measurements (DM and DV)
          Y.1731 Delay Measurement (DM)
          Loss Measurement (LM)
        EFM OAM (802.3ah)
          Unidirectional OAM Operation
          Remote Loopback
          802.3ah OAMPDU Tunneling and Termination for Epipe Services
          Dying Gasp
      Ethernet Loopbacks
        Line and Internal Ethernet Loopbacks
          MAC Swapping
          Interaction of Ethernet Port Loopback with Other Features
        CFM Loopbacks for OAM on Ethernet Ports
          CFM Loopback Mechanics
      OAM Propagation to Attachment Circuits
        ATM Ports
        T1/E1 TDM Ports
        Ethernet Ports
        Pseudowire Status Signaling OAM Propagation
      LDP Status Signaling
        LDP Status via Label Withdrawal
        LDP Status via TLV
      IP Multicast Debugging Tools
        Mtrace
          Finding the Last-Hop Router
          Directing the Response
        Mstat
        Mrinfo
    Service Assurance Agent Overview
      SAA Application
        Traceroute Implementation
        SAA Jitter
        SAA Ethernet CFM Test Support
          Writing SAA Ethernet CFM Test Results to Accounting Files
    Configuring SAA Test Parameters
    Synthetic Loss Measurement (SLM)
      Configuration Example
    OAM Timestamping
    OAM and SAA Command Reference
      Command Hierarchies
        Operational Commands
          Operational Commands
          Multicast Commands
        OAM Commands
          ATM Diagnostics
          TWAMP
          LSP Diagnostics
          LDP Diagnostics
          SDP Diagnostics
          Service Diagnostics
          VLL Diagnostics
          VPLS Diagnostics
          Ethernet in the First Mile (EFM) Commands
          ETH-CFM Commands
          DSL Loopback
        SAA Commands
          SAA Diagnostics
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        OAM and SAA Commands
          Operational Commands
          Multicast Commands
          ATM Diagnostics
          Service Diagnostics
          EFM Commands
          ETH-CFM Commands
          DSL Commands
          SAA Commands
          TWAMP Commands
          LDP Diagnostics
          OAM SAA Commands
        Show Commands
        Clear Commands
        Debug Commands
  Tools
    Tools Command Reference
      Command Hierarchies
        Tools Dump Commands
        Tools Perform Commands
        Tools ADP Commands
      Command Descriptions
        Tools Dump Commands
          Generic Commands
          Dump Commands
          Dump Test-OAM Commands
          Dump Router Commands
        Tools Perform Commands
          Perform Commands
          Perform Router Commands
        Tools ADP Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR OAM Configuration Process
  OAM and SAA
    In This Chapter
    OAM Overview
      ICMP and ICMPv6 Diagnostics
        Ping
        Traceroute
      Two-Way Active Measurement Protocol
        7705 SAR support for TWAMP server
          Interactions with Ethernet Loopback
          Limitations
      LSP Diagnostics
        LSP Ping
        LSP Traceroute
        LSP Ping and LSP Traceroute for BGP Route Tunnels
          TC Handling on BGP Route Tunnels
          BGP Route Tunnel Traceroute
          Traceroute TTL for Self-generated Traffic
      SDP Diagnostics
        SDP Ping
        SDP MTU Path Discovery
      Service Diagnostics
        Service Ping
      VLL Diagnostics
        VCCV Ping
          VCCV Ping Application
          VCCV Ping in a Multi-Segment Pseudowire
          Automated VCCV Trace Capability for Multi-Segment Pseudowire
          VCCV for Static Pseudowire Segments
          VCCV for MS-PW and Pseudowire Redundancy
          Detailed VCCV Trace Operation
        VCCV Trace
      VPLS MAC Diagnostics
        MAC Ping
        MAC Trace
        CPE Ping
        MAC Populate
        MAC Purge
      Ethernet OAM Capabilities
        Ethernet OAM Overview
          Ethernet OAM Usage Examples
        802.1ag and Y.1731 Functional Comparison
        ETH-CFM Ethernet OAM Tests (802.1ag and Y.1731)
          Hold MEP Up On Failure
          Loopback (LB)
          Linktrace (LT)
          Throughput Measurement
          Continuity Check (CC)
          ETH-RDI
          ETH-AIS
          ETH-Test
        ITU-T Y.1731 Performance Monitoring (PM)
          Delay and Delay Variation Measurements (DM and DV)
          Y.1731 Delay Measurement (DM)
          Loss Measurement (LM)
        EFM OAM (802.3ah)
          Unidirectional OAM Operation
          Remote Loopback
          802.3ah OAMPDU Tunneling and Termination for Epipe Services
          Dying Gasp
      Ethernet Loopbacks
        Line and Internal Ethernet Loopbacks
          MAC Swapping
          Interaction of Ethernet Port Loopback with Other Features
        CFM Loopbacks for OAM on Ethernet Ports
          CFM Loopback Mechanics
      OAM Propagation to Attachment Circuits
        ATM Ports
        T1/E1 TDM Ports
        Ethernet Ports
        Pseudowire Status Signaling OAM Propagation
      LDP Status Signaling
        LDP Status via Label Withdrawal
        LDP Status via TLV
      IP Multicast Debugging Tools
        Mtrace
          Finding the Last-Hop Router
          Directing the Response
        Mstat
        Mrinfo
    Service Assurance Agent Overview
      SAA Application
        Traceroute Implementation
        SAA Jitter
        SAA Ethernet CFM Test Support
          Writing SAA Ethernet CFM Test Results to Accounting Files
    Configuring SAA Test Parameters
    Synthetic Loss Measurement (SLM)
      Configuration Example
    OAM Timestamping
    OAM and SAA Command Reference
      Command Hierarchies
        Operational Commands
          Operational Commands
          Multicast Commands
        OAM Commands
          ATM Diagnostics
          TWAMP
          LSP Diagnostics
          LDP Diagnostics
          SDP Diagnostics
          Service Diagnostics
          VLL Diagnostics
          VPLS Diagnostics
          Ethernet in the First Mile (EFM) Commands
          ETH-CFM Commands
          DSL Loopback
        SAA Commands
          SAA Diagnostics
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        OAM and SAA Commands
          Operational Commands
          Multicast Commands
          ATM Diagnostics
          Service Diagnostics
          EFM Commands
          ETH-CFM Commands
          DSL Commands
          SAA Commands
          TWAMP Commands
          LDP Diagnostics
          OAM SAA Commands
        Show Commands
        Clear Commands
        Debug Commands
  Tools
    Tools Command Reference
      Command Hierarchies
        Tools Dump Commands
        Tools Perform Commands
        Tools ADP Commands
      Command Descriptions
        Tools Dump Commands
          Generic Commands
          Dump Commands
          Dump Test-OAM Commands
          Dump Router Commands
        Tools Perform Commands
          Perform Commands
          Perform Router Commands
        Tools ADP Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
7705 SAR OS Quality of Service Guide R6.1.R4
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR QoS Configuration Process
  QoS Policies
    In This Chapter
    QoS Overview
      Overview
      Egress and Ingress Traffic Direction
        Ring Traffic
      Forwarding Classes
      Intelligent Discards
      Buffering
        Buffer Pools
        CBS and MBS Configuration
        Buffer Unit Allocation and Buffer Chaining
          Advantages of Buffer Chaining
      Per-SAP Aggregate Shapers (H-QoS)
        Shaped and Unshaped SAPs
          Per-SAP Aggregate Shaper Support
        Sample Scenario
      Per-VLAN Network Egress Shapers
        Shaped and Unshaped VLANs
        Per-VLAN Shaper Support
        Sample Scenarios
          VLAN Shapers for Dual Uplinks
          VLAN Shapers for Aggregation Site
      QoS on a Ring Adapter Card or Module
        Network and Network Queue QoS Policy Types
        Network QoS and Network Queue Policies on a Ring Adapter Card or Module
        Considerations for Using Ring Adapter Card or Module QoS Policies
      QoS for Hybrid Ports
      QoS for IPSec Traffic
    Access Ingress
      Access Ingress Traffic Classification
        Traffic Classification Types
          Hierarchy of Classification Rules
          Discard Probability of Classified Traffic
      Access Ingress Queues
      Ingress Queuing and Scheduling
        Profiled (Rate-based) Scheduling
        Queue-Type Scheduling
        4-Priority Scheduling
        Ingress Queuing and Scheduling for BMU Traffic
      Access Ingress Per-SAP Aggregate Shapers (Access Ingress H-QoS)
        Access Ingress Per-SAP Shapers Arbitration
      Ingress Shaping to Fabric (Access and Network)
        BMU Support
          Aggregate Mode BMU Support
          Destination Mode BMU Support
        LAG SAP Support (Access Only)
      Configurable Ingress Shaping to Fabric (Access and Network)
      Fabric Shaping on the 7705 SAR-A, 7705 SAR-M, 7705 SAR-H, 7705 SAR-Hc, 7705 SAR-W, and 7705 SAR-Wx (Access and Network)
    Fabric Traffic
      Traffic Flow Across the Fabric
    Network Egress
      BMU Traffic at Network Egress
      Network Egress Queuing Aggregation
        Network Egress Per-VLAN Queuing
      Network Egress Scheduling
        Network Egress 4-Priority Scheduling
        Network Egress Scheduling on 8-port Ethernet Adapter Cards
        Network Egress 16-Priority Scheduling
      Network Egress Shaping
      Network Egress Shaping for Hybrid Ports
      Network Egress Per-VLAN Shapers
        Network Egress Per-VLAN Shapers Arbitration
      Network Egress Marking and Re-Marking
        Network Egress Marking and Re-Marking on Ethernet ports
    Network Ingress
      Network Ingress Classification
      Network Ingress Queuing
        Network Ingress Queuing for BMU Traffic
      Network Ingress Scheduling
        Network Ingress 4-Priority Scheduling
        Network Ingress Scheduling on 8-port Ethernet Adapter Cards
        Network Ingress 16-Priority Scheduling
      Network Ingress Shaping to Fabric
      Configurable Network Ingress Shaping to Fabric
      Network Fabric Shaping on the 7705 SAR-A, 7705 SAR-M, 7705 SAR-H, 7705 SAR-Hc, 7705 SAR-W, and 7705 SAR-Wx
    Access Egress
      Access Egress Queuing and Scheduling
        BMU Traffic Access Egress Queuing and Scheduling
        ATM Access Egress Queuing and Scheduling
        Ethernet Access Egress Queuing and Scheduling
      Access Egress Per-SAP Aggregate Shapers (Access Egress H-QoS)
        Access Egress Per-SAP Shapers Arbitration
      Access Egress Shaping for Hybrid Ports
      Access Egress Marking/Re-Marking
    QoS Policies Overview
      Overview
      Service Ingress QoS Policies
      Service Egress QoS Policies
      MC-MLPPP SAP Egress QoS Policies
      Network and Service QoS Policies
        Network QoS Policies
          CoS Marking for Self-generated Traffic
        Network Queue QoS Policies
          Network and Service QoS Queue Parameters
      Slope Policies (WRED and RED)
        WRED MinThreshold and MaxThreshold Computation
        WRED on Bridging Domain (Ring) Queues
      ATM Traffic Descriptor Profiles
      Fabric Profiles
      Shaper Policies
      QoS Policy Entities
    Configuration Notes
      Reference Sources
  Network QoS Policies
    In This Chapter
    Overview
    Basic Configuration
      Configuring a Network QoS Policy
      Creating a Network QoS Policy
      Applying Network QoS Policies
      Default Network QoS Policy Values
    Service Management Tasks
      Deleting QoS Policies
      Copying and Overwriting Network Policies
      Editing QoS Policies
    Network QoS Policy Command Reference
      Command Hierarchies
        Configuration Commands
          QoS Policy Network Commands
          Self-generated Traffic Configuration Commands
        Operational Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Network QoS Policy Commands
          Network Egress QoS Policy Commands
          Network Ingress QoS Policy Commands
          Network Ring QoS Policy Commands
          Network Egress QoS Policy Forwarding Class Commands
          Self-generated Traffic Commands
        Operational Commands
        Show Commands
  Network Queue QoS Policies
    In This Chapter
    Overview
    Basic Configuration
      Configuring a Network Queue QoS Policy
      Creating a Network Queue QoS Policy
      Applying Network Queue QoS Policies
        Adapter Cards
        Network Ports
      Default Network Queue QoS Policy Values
    Service Management Tasks
      Deleting QoS Policies
      Copying and Overwriting QoS Policies
      Editing QoS Policies
    Network Queue QoS Policy Command Reference
      Command Hierarchies
        Configuration Commands
        Operational Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Network Queue QoS Policy Commands
          Network Queue QoS Policy Forwarding Class Commands
        Operational Commands
        Show Commands
  Service Egress and Ingress QoS Policies
    In This Chapter
    Overview
    Basic Configuration
      Creating Service Egress and Ingress QoS Policies
        Creating a Service Egress QoS Policy
          Creating a Service Egress QoS Forwarding Class
          Creating a Service Egress QoS Queue
        Creating a Service Ingress QoS Policy
          Creating a Service Ingress Forwarding Class
          Creating a Service Ingress QoS Queue
        Creating an MC-MLPPP SAP Egress QoS Policy
          Creating an MC-MLPPP SAP Egress QoS Forwarding Class
          Creating an MC-MLPPP SAP Egress QoS Queue
      Applying Service Egress and Ingress Policies
        VLL and VPLS Services
        IES and VPRN Services
      Default Service Egress and Ingress Policy Values
        Service Egress Policy Defaults
        Service Ingress Policy Defaults
      Configuring per-SAP Aggregate Shapers and an Unshaped SAP Aggregate Shaper (H-QoS)
        Creating 16-Priority Shaped SAPs and per-SAP Aggregate Shapers
        Configuring an Unshaped Aggregate CIR for All 4-Priority Unshaped SAPs (Access Ingress)
        Configuring an Unshaped Aggregate CIR for All 4-Priority Unshaped SAPs (Access Egress)
    Service Management Tasks
      Deleting QoS Policies
        Removing a QoS Policy from a Service SAP
        Removing a Policy from the QoS Configuration
      Copying and Overwriting QoS Policies
      Editing QoS Policies
    Service Egress and Ingress QoS Policy Command Reference
      Command Hierarchies
        Service Egress QoS Policy Configuration Commands
        Service Ingress QoS Policy Configuration Commands
        MC-MLPPP SAP Egress QoS Policies
        Operational Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Service Egress QoS Policy Commands
          Service Egress QoS Policy Forwarding Class Commands
          MC-MLPPP SAP Egress QoS Policy Commands
          MC-MLPPP Forwarding Class Commands
          MC-MLPPP Queue Commands
          Service Ingress QoS Policy Commands
          Service Ingress QoS Policy Forwarding Class Commands
          Service Queue QoS Policy Commands
        Operational Commands
        Show Commands
  Slope QoS Policies
    In This Chapter
    Overview
    Basic Configuration
      Creating a Slope QoS Policy
      Applying Slope Policies
      Default Slope Policy Values
    Service Management Tasks
      Deleting QoS Policies
        Removing a Policy from the QoS Configuration
      Copying and Overwriting QoS Policies
      Editing QoS Policies
    Slope QoS Policy Command Reference
      Command Hierarchies
        Configuration Commands
        Operational Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Slope Policy QoS Commands
          WRED/RED Slope Commands
        Operational Commands
        Show Commands
  ATM QoS Traffic Descriptor Profiles
    In This Chapter
    ATM Traffic Descriptor Profiles
      ATM Traffic Management
        ATM Service Categories
        ATM Traffic Descriptors and QoS Parameters
        ATM Policing
        Shaping
        ATM Queuing and Scheduling
        Congestion Avoidance
    Basic Configuration
      Creating an ATM Traffic Descriptor Profile QoS Policy
      Applying ATM Traffic Descriptor Profile Policies
        ATM VLL (Apipe) SAPs
      Default ATM Traffic Descriptor Profile Policy Values
    Service Management Tasks
      Removing an ATM Traffic Descriptor Profile from the QoS Configuration
      Copying and Overwriting an ATM Traffic Descriptor Profile
      Editing QoS Policies
    ATM QoS Policy Command Reference
      Command Hierarchies
        Configuration Commands
        Operational Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          ATM QoS Policy Commands
        Operational Commands
        Show Commands
  QoS Fabric Profiles
    In This Chapter
    Basic Configuration
      Creating a QoS Fabric Profile
      Applying a QoS Fabric Profile
      Default Fabric Profile Values
    Service Management Tasks
      Removing a Fabric Profile from the QoS Configuration
      Copying and Overwriting a Fabric Profile
      Editing QoS Policies
    QoS Fabric Profile Command Reference
      Command Hierarchies
        Configuration Commands
        Operational Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          QoS Fabric Profile Commands
          Fabric Shaping on the 7705 SAR-M, 7705 SAR-H, 7705 SAR-Hc, 7705 SAR-A, 7705 SAR-W, and 7705 SAR-Wx
        Operational Commands
        Show Commands
  Shaper QoS Policies
    In This Chapter
    Overview
    Basic Configuration
      Creating a Shaper QoS Policy
      Applying a Shaper Policy
      Default Shaper Policy Values
      Configuring Per-SAP Aggregate Shapers
      Configuring a CIR for Access Egress Unshaped SAPs
      Configuring Per-VLAN Network Egress Shapers
      Configuring a CIR for Network Egress Unshaped VLANs
    Service Management Tasks
      Removing and Deleting QoS Policies
      Copying and Overwriting QoS Policies
      Editing QoS Policies
    Shaper QoS Policy Command Reference
      Command Hierarchies
        Configuration Commands
        Operational Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Shaper QoS Policy Commands
        Operational Commands
        Show Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR QoS Configuration Process
  QoS Policies
    In This Chapter
    QoS Overview
      Overview
      Egress and Ingress Traffic Direction
        Ring Traffic
      Forwarding Classes
      Intelligent Discards
      Buffering
        Buffer Pools
        CBS and MBS Configuration
        Buffer Unit Allocation and Buffer Chaining
          Advantages of Buffer Chaining
      Per-SAP Aggregate Shapers (H-QoS)
        Shaped and Unshaped SAPs
          Per-SAP Aggregate Shaper Support
        Sample Scenario
      Per-VLAN Network Egress Shapers
        Shaped and Unshaped VLANs
        Per-VLAN Shaper Support
        Sample Scenarios
          VLAN Shapers for Dual Uplinks
          VLAN Shapers for Aggregation Site
      QoS on a Ring Adapter Card or Module
        Network and Network Queue QoS Policy Types
        Network QoS and Network Queue Policies on a Ring Adapter Card or Module
        Considerations for Using Ring Adapter Card or Module QoS Policies
      QoS for Hybrid Ports
      QoS for IPSec Traffic
    Access Ingress
      Access Ingress Traffic Classification
        Traffic Classification Types
          Hierarchy of Classification Rules
          Discard Probability of Classified Traffic
      Access Ingress Queues
      Ingress Queuing and Scheduling
        Profiled (Rate-based) Scheduling
        Queue-Type Scheduling
        4-Priority Scheduling
        Ingress Queuing and Scheduling for BMU Traffic
      Access Ingress Per-SAP Aggregate Shapers (Access Ingress H-QoS)
        Access Ingress Per-SAP Shapers Arbitration
      Ingress Shaping to Fabric (Access and Network)
        BMU Support
          Aggregate Mode BMU Support
          Destination Mode BMU Support
        LAG SAP Support (Access Only)
      Configurable Ingress Shaping to Fabric (Access and Network)
      Fabric Shaping on the 7705 SAR-A, 7705 SAR-M, 7705 SAR-H, 7705 SAR-Hc, 7705 SAR-W, and 7705 SAR-Wx (Access and Network)
    Fabric Traffic
      Traffic Flow Across the Fabric
    Network Egress
      BMU Traffic at Network Egress
      Network Egress Queuing Aggregation
        Network Egress Per-VLAN Queuing
      Network Egress Scheduling
        Network Egress 4-Priority Scheduling
        Network Egress Scheduling on 8-port Ethernet Adapter Cards
        Network Egress 16-Priority Scheduling
      Network Egress Shaping
      Network Egress Shaping for Hybrid Ports
      Network Egress Per-VLAN Shapers
        Network Egress Per-VLAN Shapers Arbitration
      Network Egress Marking and Re-Marking
        Network Egress Marking and Re-Marking on Ethernet ports
    Network Ingress
      Network Ingress Classification
      Network Ingress Queuing
        Network Ingress Queuing for BMU Traffic
      Network Ingress Scheduling
        Network Ingress 4-Priority Scheduling
        Network Ingress Scheduling on 8-port Ethernet Adapter Cards
        Network Ingress 16-Priority Scheduling
      Network Ingress Shaping to Fabric
      Configurable Network Ingress Shaping to Fabric
      Network Fabric Shaping on the 7705 SAR-A, 7705 SAR-M, 7705 SAR-H, 7705 SAR-Hc, 7705 SAR-W, and 7705 SAR-Wx
    Access Egress
      Access Egress Queuing and Scheduling
        BMU Traffic Access Egress Queuing and Scheduling
        ATM Access Egress Queuing and Scheduling
        Ethernet Access Egress Queuing and Scheduling
      Access Egress Per-SAP Aggregate Shapers (Access Egress H-QoS)
        Access Egress Per-SAP Shapers Arbitration
      Access Egress Shaping for Hybrid Ports
      Access Egress Marking/Re-Marking
    QoS Policies Overview
      Overview
      Service Ingress QoS Policies
      Service Egress QoS Policies
      MC-MLPPP SAP Egress QoS Policies
      Network and Service QoS Policies
        Network QoS Policies
          CoS Marking for Self-generated Traffic
        Network Queue QoS Policies
          Network and Service QoS Queue Parameters
      Slope Policies (WRED and RED)
        WRED MinThreshold and MaxThreshold Computation
        WRED on Bridging Domain (Ring) Queues
      ATM Traffic Descriptor Profiles
      Fabric Profiles
      Shaper Policies
      QoS Policy Entities
    Configuration Notes
      Reference Sources
  Network QoS Policies
    In This Chapter
    Overview
    Basic Configuration
      Configuring a Network QoS Policy
      Creating a Network QoS Policy
      Applying Network QoS Policies
      Default Network QoS Policy Values
    Service Management Tasks
      Deleting QoS Policies
      Copying and Overwriting Network Policies
      Editing QoS Policies
    Network QoS Policy Command Reference
      Command Hierarchies
        Configuration Commands
          QoS Policy Network Commands
          Self-generated Traffic Configuration Commands
        Operational Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Network QoS Policy Commands
          Network Egress QoS Policy Commands
          Network Ingress QoS Policy Commands
          Network Ring QoS Policy Commands
          Network Egress QoS Policy Forwarding Class Commands
          Self-generated Traffic Commands
        Operational Commands
        Show Commands
  Network Queue QoS Policies
    In This Chapter
    Overview
    Basic Configuration
      Configuring a Network Queue QoS Policy
      Creating a Network Queue QoS Policy
      Applying Network Queue QoS Policies
        Adapter Cards
        Network Ports
      Default Network Queue QoS Policy Values
    Service Management Tasks
      Deleting QoS Policies
      Copying and Overwriting QoS Policies
      Editing QoS Policies
    Network Queue QoS Policy Command Reference
      Command Hierarchies
        Configuration Commands
        Operational Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Network Queue QoS Policy Commands
          Network Queue QoS Policy Forwarding Class Commands
        Operational Commands
        Show Commands
  Service Egress and Ingress QoS Policies
    In This Chapter
    Overview
    Basic Configuration
      Creating Service Egress and Ingress QoS Policies
        Creating a Service Egress QoS Policy
          Creating a Service Egress QoS Forwarding Class
          Creating a Service Egress QoS Queue
        Creating a Service Ingress QoS Policy
          Creating a Service Ingress Forwarding Class
          Creating a Service Ingress QoS Queue
        Creating an MC-MLPPP SAP Egress QoS Policy
          Creating an MC-MLPPP SAP Egress QoS Forwarding Class
          Creating an MC-MLPPP SAP Egress QoS Queue
      Applying Service Egress and Ingress Policies
        VLL and VPLS Services
        IES and VPRN Services
      Default Service Egress and Ingress Policy Values
        Service Egress Policy Defaults
        Service Ingress Policy Defaults
      Configuring per-SAP Aggregate Shapers and an Unshaped SAP Aggregate Shaper (H-QoS)
        Creating 16-Priority Shaped SAPs and per-SAP Aggregate Shapers
        Configuring an Unshaped Aggregate CIR for All 4-Priority Unshaped SAPs (Access Ingress)
        Configuring an Unshaped Aggregate CIR for All 4-Priority Unshaped SAPs (Access Egress)
    Service Management Tasks
      Deleting QoS Policies
        Removing a QoS Policy from a Service SAP
        Removing a Policy from the QoS Configuration
      Copying and Overwriting QoS Policies
      Editing QoS Policies
    Service Egress and Ingress QoS Policy Command Reference
      Command Hierarchies
        Service Egress QoS Policy Configuration Commands
        Service Ingress QoS Policy Configuration Commands
        MC-MLPPP SAP Egress QoS Policies
        Operational Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Service Egress QoS Policy Commands
          Service Egress QoS Policy Forwarding Class Commands
          MC-MLPPP SAP Egress QoS Policy Commands
          MC-MLPPP Forwarding Class Commands
          MC-MLPPP Queue Commands
          Service Ingress QoS Policy Commands
          Service Ingress QoS Policy Forwarding Class Commands
          Service Queue QoS Policy Commands
        Operational Commands
        Show Commands
  Slope QoS Policies
    In This Chapter
    Overview
    Basic Configuration
      Creating a Slope QoS Policy
      Applying Slope Policies
      Default Slope Policy Values
    Service Management Tasks
      Deleting QoS Policies
        Removing a Policy from the QoS Configuration
      Copying and Overwriting QoS Policies
      Editing QoS Policies
    Slope QoS Policy Command Reference
      Command Hierarchies
        Configuration Commands
        Operational Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Slope Policy QoS Commands
          WRED/RED Slope Commands
        Operational Commands
        Show Commands
  ATM QoS Traffic Descriptor Profiles
    In This Chapter
    ATM Traffic Descriptor Profiles
      ATM Traffic Management
        ATM Service Categories
        ATM Traffic Descriptors and QoS Parameters
        ATM Policing
        Shaping
        ATM Queuing and Scheduling
        Congestion Avoidance
    Basic Configuration
      Creating an ATM Traffic Descriptor Profile QoS Policy
      Applying ATM Traffic Descriptor Profile Policies
        ATM VLL (Apipe) SAPs
      Default ATM Traffic Descriptor Profile Policy Values
    Service Management Tasks
      Removing an ATM Traffic Descriptor Profile from the QoS Configuration
      Copying and Overwriting an ATM Traffic Descriptor Profile
      Editing QoS Policies
    ATM QoS Policy Command Reference
      Command Hierarchies
        Configuration Commands
        Operational Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          ATM QoS Policy Commands
        Operational Commands
        Show Commands
  QoS Fabric Profiles
    In This Chapter
    Basic Configuration
      Creating a QoS Fabric Profile
      Applying a QoS Fabric Profile
      Default Fabric Profile Values
    Service Management Tasks
      Removing a Fabric Profile from the QoS Configuration
      Copying and Overwriting a Fabric Profile
      Editing QoS Policies
    QoS Fabric Profile Command Reference
      Command Hierarchies
        Configuration Commands
        Operational Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          QoS Fabric Profile Commands
          Fabric Shaping on the 7705 SAR-M, 7705 SAR-H, 7705 SAR-Hc, 7705 SAR-A, 7705 SAR-W, and 7705 SAR-Wx
        Operational Commands
        Show Commands
  Shaper QoS Policies
    In This Chapter
    Overview
    Basic Configuration
      Creating a Shaper QoS Policy
      Applying a Shaper Policy
      Default Shaper Policy Values
      Configuring Per-SAP Aggregate Shapers
      Configuring a CIR for Access Egress Unshaped SAPs
      Configuring Per-VLAN Network Egress Shapers
      Configuring a CIR for Network Egress Unshaped VLANs
    Service Management Tasks
      Removing and Deleting QoS Policies
      Copying and Overwriting QoS Policies
      Editing QoS Policies
    Shaper QoS Policy Command Reference
      Command Hierarchies
        Configuration Commands
        Operational Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Shaper QoS Policy Commands
        Operational Commands
        Show Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
7705 SAR OS Router Configuration Guide R6.1.R4
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR Router Configuration Process
  IP Router Configuration
    In This Chapter
    Configuring IP Router Parameters
      Interfaces
        Network Interface
          Ethernet Ports and Multiple ARP Entries
          Dynamic ARP and Static MAC entry
          Proxy ARP
          ETH-CFM Support
        System Interface
      IP Addresses
      Internet Protocol Versions
        IPv6 Address Format
        IPv6 Headers
        Neighbor Discovery
      Router ID
      Autonomous Systems
      DHCP
        DHCP Relay and DHCPv6 Relay
          DHCP Relay Agent Options
        Local DHCP Server
          DHCP Server Options
      ICMP and ICMPv6
      Static Routes, Dynamic Routes, and ECMP
      IGP-LDP and Static Route-LDP Synchronization
      Bidirectional Forwarding Detection (BFD)
      NAT
        Session Creation
        NAT Zones
          Zone Direction
          Zone Configuration
        NAT Security Profile
        NAT Policies
        Dynamic Source NAT
        Local Traffic and NAT
        Port Forwarding (Static Destination NAT)
        Session Resource Alarms
        NAT Support for Fragmented Packets
    Router Configuration Process Overview
    Configuration Notes
      Reference Sources
    Configuring an IP Router with CLI
    Router Configuration Overview
      System Interface
      Network Interface
    Basic Configuration
    Common Configuration Tasks
      Configuring a System Name
      Configuring Interfaces
        Configuring a System Interface
        Configuring a Network Interface
          Creating an IPv6 Network Interface
      Configuring IPv6 Parameters
      Configuring Router Advertisement
      Configuring ECMP
      Configuring Static Routes
      Configuring or Deriving a Router ID
      Configuring an Autonomous System
      Configuring ICMP and ICMPv6
      Configuring a DHCP Relay Agent
      Configuring Proxy ARP
      Configuring a NAT Zone
    Service Management Tasks
      Changing the System Name
      Modifying Interface Parameters
      Deleting a Logical IP Interface
    IP Router Command Reference
      Command Hierarchies
        Configuration Commands
          Router Commands
          Local DHCP Server Commands
          Router Interface Commands
          Router Interface IPv6 Commands
          Router Advertisement Commands
          Router NAT Configuration Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Router Global Commands
          Local DHCP Server Commands
          Router Interface Commands
          Router Interface IPv6 Commands
          Router Interface DHCP Relay Agent Commands
          Router Interface Filter Commands
          Router Interface ICMP and ICMPv6 Commands
          Router Advertisement Commands
          Router NAT Configuration Commands
        Show Commands
        Clear Commands
        Debug Commands
  VRRP
    In This Chapter
    VRRP Overview
    VRRP Components
      Virtual Router
      IP Address Owner
      Primary Address
      Virtual Router Master
      Owner and Non-owner VRRP
      Configurable Parameters
        VRID
        Priority
        IP Addresses
        Message Interval and Master Inheritance
        Master Down Interval
        Skew Time
        Preempt Mode
        VRRP Message Authentication
        Virtual MAC Address
        VRRP Advertisement Message IP Address List Verification
        Policies
    VRRP Priority Control Policies
      VRRP Policy Constraints
      VRRP Base Priority
      VRRP Priority Control Policy In-use Priority
      VRRP Priority Control Policy Priority Events
        Priority Event Hold-set Timers
        Port Down Priority Event
        Host Unreachable Priority Event
        Route Unknown Priority Event
    VRRP Non-owner Accessibility
      Non-owner Access Ping Reply
      Non-owner Access Telnet
      Non-owner Access SSH
    VRRP Configuration Process Overview
    Configuration Notes
      General
    Configuring VRRP with CLI
    VRRP Configuration Overview
      Preconfiguration Requirements
    Basic VRRP Configurations
      VRRP Policy
        Deleting a VRRP Policy
      VRRP IES or VPRN Service Parameters
    Common Configuration Tasks
    Configuring IES/VPRN VRRP Parameters
      Configuring VRRP on Subnets
      Non-owner VRRP
      Owner VRRP
      Deleting VRRP on a Service
    VRRP Command Reference
      Command Hierarchies
      VRRP Priority Control Event Policy Commands
      VRRP Show Commands
      VRRP Monitor Commands
      VRRP Clear Commands
      VRRP Debug Commands
      Command Descriptions
        Configuration Commands
          VRRP Priority Control Event Policy Commands
          VRRP Priority Event Commands
        VRRP Show Commands
        VRRP Monitor Commands
        VRRP Clear Commands
        VRRP Debug Commands
  Filter Policies
    In This Chapter
    Configuring Filter Policies
      Overview of Filter Policies
      Network and Service (Access) Interface-based Filtering
        Policy-Based Routing
        Multi-field Classification (MFC)
      VLAN-based Filtering
      Filter Policy Entries
        Applying Filter Policies
        Packet Matching Criteria
        Ordering Filter Entries
      Filter Log Files
    Configuration Notes
      IP Filters
      IPv6 Filters
      MAC Filters
      VLAN Filters
      Filter Logs
      Reference Sources
    Configuring Filter Policies with CLI
    Basic Configuration
    Common Configuration Tasks
      Creating an IPv4 or IPv6 Filter Policy
        IP Filter Policy
        IP Filter Entry
        IP Filter Entry Matching Criteria
        IP Filter Entry for PBR to a System IP or Loopback Address
      Creating a MAC Filter Policy
        MAC Filter Policy
        MAC Filter Entry
        MAC Entry Matching Criteria
      Creating a VLAN Filter Policy
        VLAN Filter Policy
        VLAN Filter Entry
        VLAN Entry Matching Criteria
      Configuring Filter Log Policies
      Applying IP and MAC Filter Policies to a Service
      Applying IP Filter Policies to Network Interfaces
      Applying VLAN Filter Policies to a Ring Port
    Filter Management Tasks
      Renumbering Filter Policy Entries
      Modifying an IP Filter Policy
      Modifying a MAC Filter Policy
      Modifying a VLAN Filter Policy
      Removing and Deleting a Filter Policy
        Removing a Filter from a Service
        Removing a Filter from a Network Interface
        Removing a Filter from a Ring Port
        Deleting a Filter
      Configuring a NAT Security Profile
      Configuring a NAT Security Policy
    Filter Command Reference
      Command Hierarchies
        Configuration Commands
          IP Filter Log Configuration Commands
          IP Filter Policy Configuration Commands
          IPv6 Filter Policy Configuration Commands
          MAC Filter Policy Commands
          VLAN Filter Policy Commands
          NAT Policy Commands
        Show Commands
        Clear Commands
        Monitor Commands
        Debug Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Filter Log Commands
          Filter Policy Commands
          General Filter Entry Commands
          IP, MAC, and VLAN Filter Entry Commands
          IP and MAC Filter Match Criteria Commands
          NAT Policy Commands
        Show Commands
        Clear Commands
        Monitor Commands
        Debug Commands
  Route Policies
    In This Chapter
    Configuring Route Policies
      Routing Policy and MPLS
      Policy Statements
        Default Action Behavior
        Denied IP Prefixes
        Controlling Route Flapping
      Regular Expressions
      BGP and OSPF Route Policy Support
        BGP Route Policies
        Readvertised Route Policies
      When to Use Route Policies
    Route Policy Configuration Process Overview
    Configuration Notes
      Reference Sources
    Configuring Route Policies with CLI
    Route Policy Configuration Overview
      When to Create Routing Policies
      Default Route Policy Actions
      Policy Evaluation
        Damping
    Basic Route Policy Configuration
    Configuring Route Policy Components
      Beginning the Policy Statement
      Creating a Route Policy
      Configuring a Default Action
      Configuring an Entry
      Configuring an AS Path (policy-option)
      Configuring a Community List
      Configuring Damping
      Configuring a Prefix List
      Configuring PIM Join Policies
      Configuring Bootstrap Message Import and Export Policies
    Route Policy Configuration Management Tasks
      Editing Policy Statements and Parameters
      Deleting an Entry
      Deleting a Policy Statement
    Route Policy Command Reference
      Command Hierarchies
        Route Policy Configuration Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Route Policy Options
          Route Policy Damping Commands
          Route Policy Prefix Commands
          Route Policy Entry Match Commands
          Route Policy Action Commands
        Show Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR Router Configuration Process
  IP Router Configuration
    In This Chapter
    Configuring IP Router Parameters
      Interfaces
        Network Interface
          Ethernet Ports and Multiple ARP Entries
          Dynamic ARP and Static MAC entry
          Proxy ARP
          ETH-CFM Support
        System Interface
      IP Addresses
      Internet Protocol Versions
        IPv6 Address Format
        IPv6 Headers
        Neighbor Discovery
      Router ID
      Autonomous Systems
      DHCP
        DHCP Relay and DHCPv6 Relay
          DHCP Relay Agent Options
        Local DHCP Server
          DHCP Server Options
      ICMP and ICMPv6
      Static Routes, Dynamic Routes, and ECMP
      IGP-LDP and Static Route-LDP Synchronization
      Bidirectional Forwarding Detection (BFD)
      NAT
        Session Creation
        NAT Zones
          Zone Direction
          Zone Configuration
        NAT Security Profile
        NAT Policies
        Dynamic Source NAT
        Local Traffic and NAT
        Port Forwarding (Static Destination NAT)
        Session Resource Alarms
        NAT Support for Fragmented Packets
    Router Configuration Process Overview
    Configuration Notes
      Reference Sources
    Configuring an IP Router with CLI
    Router Configuration Overview
      System Interface
      Network Interface
    Basic Configuration
    Common Configuration Tasks
      Configuring a System Name
      Configuring Interfaces
        Configuring a System Interface
        Configuring a Network Interface
          Creating an IPv6 Network Interface
      Configuring IPv6 Parameters
      Configuring Router Advertisement
      Configuring ECMP
      Configuring Static Routes
      Configuring or Deriving a Router ID
      Configuring an Autonomous System
      Configuring ICMP and ICMPv6
      Configuring a DHCP Relay Agent
      Configuring Proxy ARP
      Configuring a NAT Zone
    Service Management Tasks
      Changing the System Name
      Modifying Interface Parameters
      Deleting a Logical IP Interface
    IP Router Command Reference
      Command Hierarchies
        Configuration Commands
          Router Commands
          Local DHCP Server Commands
          Router Interface Commands
          Router Interface IPv6 Commands
          Router Advertisement Commands
          Router NAT Configuration Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Router Global Commands
          Local DHCP Server Commands
          Router Interface Commands
          Router Interface IPv6 Commands
          Router Interface DHCP Relay Agent Commands
          Router Interface Filter Commands
          Router Interface ICMP and ICMPv6 Commands
          Router Advertisement Commands
          Router NAT Configuration Commands
        Show Commands
        Clear Commands
        Debug Commands
  VRRP
    In This Chapter
    VRRP Overview
    VRRP Components
      Virtual Router
      IP Address Owner
      Primary Address
      Virtual Router Master
      Owner and Non-owner VRRP
      Configurable Parameters
        VRID
        Priority
        IP Addresses
        Message Interval and Master Inheritance
        Master Down Interval
        Skew Time
        Preempt Mode
        VRRP Message Authentication
        Virtual MAC Address
        VRRP Advertisement Message IP Address List Verification
        Policies
    VRRP Priority Control Policies
      VRRP Policy Constraints
      VRRP Base Priority
      VRRP Priority Control Policy In-use Priority
      VRRP Priority Control Policy Priority Events
        Priority Event Hold-set Timers
        Port Down Priority Event
        Host Unreachable Priority Event
        Route Unknown Priority Event
    VRRP Non-owner Accessibility
      Non-owner Access Ping Reply
      Non-owner Access Telnet
      Non-owner Access SSH
    VRRP Configuration Process Overview
    Configuration Notes
      General
    Configuring VRRP with CLI
    VRRP Configuration Overview
      Preconfiguration Requirements
    Basic VRRP Configurations
      VRRP Policy
        Deleting a VRRP Policy
      VRRP IES or VPRN Service Parameters
    Common Configuration Tasks
    Configuring IES/VPRN VRRP Parameters
      Configuring VRRP on Subnets
      Non-owner VRRP
      Owner VRRP
      Deleting VRRP on a Service
    VRRP Command Reference
      Command Hierarchies
      VRRP Priority Control Event Policy Commands
      VRRP Show Commands
      VRRP Monitor Commands
      VRRP Clear Commands
      VRRP Debug Commands
      Command Descriptions
        Configuration Commands
          VRRP Priority Control Event Policy Commands
          VRRP Priority Event Commands
        VRRP Show Commands
        VRRP Monitor Commands
        VRRP Clear Commands
        VRRP Debug Commands
  Filter Policies
    In This Chapter
    Configuring Filter Policies
      Overview of Filter Policies
      Network and Service (Access) Interface-based Filtering
        Policy-Based Routing
        Multi-field Classification (MFC)
      VLAN-based Filtering
      Filter Policy Entries
        Applying Filter Policies
        Packet Matching Criteria
        Ordering Filter Entries
      Filter Log Files
    Configuration Notes
      IP Filters
      IPv6 Filters
      MAC Filters
      VLAN Filters
      Filter Logs
      Reference Sources
    Configuring Filter Policies with CLI
    Basic Configuration
    Common Configuration Tasks
      Creating an IPv4 or IPv6 Filter Policy
        IP Filter Policy
        IP Filter Entry
        IP Filter Entry Matching Criteria
        IP Filter Entry for PBR to a System IP or Loopback Address
      Creating a MAC Filter Policy
        MAC Filter Policy
        MAC Filter Entry
        MAC Entry Matching Criteria
      Creating a VLAN Filter Policy
        VLAN Filter Policy
        VLAN Filter Entry
        VLAN Entry Matching Criteria
      Configuring Filter Log Policies
      Applying IP and MAC Filter Policies to a Service
      Applying IP Filter Policies to Network Interfaces
      Applying VLAN Filter Policies to a Ring Port
    Filter Management Tasks
      Renumbering Filter Policy Entries
      Modifying an IP Filter Policy
      Modifying a MAC Filter Policy
      Modifying a VLAN Filter Policy
      Removing and Deleting a Filter Policy
        Removing a Filter from a Service
        Removing a Filter from a Network Interface
        Removing a Filter from a Ring Port
        Deleting a Filter
      Configuring a NAT Security Profile
      Configuring a NAT Security Policy
    Filter Command Reference
      Command Hierarchies
        Configuration Commands
          IP Filter Log Configuration Commands
          IP Filter Policy Configuration Commands
          IPv6 Filter Policy Configuration Commands
          MAC Filter Policy Commands
          VLAN Filter Policy Commands
          NAT Policy Commands
        Show Commands
        Clear Commands
        Monitor Commands
        Debug Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Filter Log Commands
          Filter Policy Commands
          General Filter Entry Commands
          IP, MAC, and VLAN Filter Entry Commands
          IP and MAC Filter Match Criteria Commands
          NAT Policy Commands
        Show Commands
        Clear Commands
        Monitor Commands
        Debug Commands
  Route Policies
    In This Chapter
    Configuring Route Policies
      Routing Policy and MPLS
      Policy Statements
        Default Action Behavior
        Denied IP Prefixes
        Controlling Route Flapping
      Regular Expressions
      BGP and OSPF Route Policy Support
        BGP Route Policies
        Readvertised Route Policies
      When to Use Route Policies
    Route Policy Configuration Process Overview
    Configuration Notes
      Reference Sources
    Configuring Route Policies with CLI
    Route Policy Configuration Overview
      When to Create Routing Policies
      Default Route Policy Actions
      Policy Evaluation
        Damping
    Basic Route Policy Configuration
    Configuring Route Policy Components
      Beginning the Policy Statement
      Creating a Route Policy
      Configuring a Default Action
      Configuring an Entry
      Configuring an AS Path (policy-option)
      Configuring a Community List
      Configuring Damping
      Configuring a Prefix List
      Configuring PIM Join Policies
      Configuring Bootstrap Message Import and Export Policies
    Route Policy Configuration Management Tasks
      Editing Policy Statements and Parameters
      Deleting an Entry
      Deleting a Policy Statement
    Route Policy Command Reference
      Command Hierarchies
        Route Policy Configuration Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Route Policy Options
          Route Policy Damping Commands
          Route Policy Prefix Commands
          Route Policy Entry Match Commands
          Route Policy Action Commands
        Show Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
7705 SAR OS Routing Protocols Guide R6.1.R4
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR Routing Configuration Process
  IP Multicast
    In This Chapter
    Overview of IP Multicast
      Mobile Backhaul IP Multicast Example
      Source-Specific Multicast (SSM) versus Any-Source Multicast (ASM)
    IPv4 Multicast
      Internet Group Management Protocol (IGMP)
        IGMP Versions and Interoperability Requirements
        IGMP Version Transition
      PIM SSM for IPv4
    IPv6 Multicast
      Multicast Listener Discovery (MLDv1 and MLDv2)
      PIM SSM for IPv6
    PIM
      PIM Routing Tables
      PIM Routing Policies
      PIM Bootstrap Message Processing
    IP Multicast Debugging Tools
      Mtrace
        Finding the Last Hop Router
        Directing the Response
      Mstat
      Mrinfo
    Configuration Notes
      General
      Reference Sources
    IP Multicast Configuration Process Overview
    Configuring IP Multicast Parameters with CLI
    IP Multicast Configuration Overview
      IGMP and MLD
        Static Groups
        SSM Translation
      PIM
      Hardware Support
    Basic IP Multicast Configuration
    Common Configuration Tasks
      Configuring IGMP and MLD Parameters
        Enabling IGMP or MLD
        Configuring IGMP and MLD
        Configuring IGMP and MLD Interfaces
        Configuring IGMP and MLD Interface Static Multicast
        Configuring IGMP and MLD SSM Translation
      Configuring PIM Parameters
        Enabling PIM
        Configuring PIM Interface Parameters
        Importing PIM Join Policies
    Service Management Tasks
      Disabling IGMP, MLD, and PIM
    IP Multicast Command Reference
      Command Hierarchies
        Configuration Commands
          Configure Router IGMP Commands
          Configure Router MLD Commands
          Configure Router PIM Commands
        Show Commands
        Clear Commands
        Debug Commands
        Monitor Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Router IGMP Commands
          Router MLD Commands
          Router PIM Commands
        Show Commands
        Clear Commands
        Debug Commands
          Debug IGMP Commands
          Debug MLD Commands
          Debug PIM Commands
          Debug Mtrace Commands
        Monitor Commands
  OSPF
    In This Chapter
    Overview of OSPF
      OSPF Areas
        Backbone Area
        Stub Area
        Not-So-Stubby Area
      Virtual Links
      Neighbors and Adjacencies
        Designated Routers and Backup Designated Routers
      Link-State Advertisements
      Metrics
      Authentication
      Route Redistribution and Summarization
      OSPF-TE Extensions
      IP Subnets
      OSPF Instances
      Bidirectional Forwarding Detection (BFD) for OSPF
      Graceful Restart Helper
      Preconfiguration Requirements
    OSPF Configuration Process Overview
    Configuration Notes
      General
      Reference Sources
    Configuring OSPF with CLI
    OSPF Configuration Guidelines
    Basic OSPF Configuration
      Configuring the Router ID
      Configuring an OSPF Area
      Configuring an Interface
    Configuring Other OSPF Components
      Configuring a Stub Area
      Configuring a Not-So-Stubby Area
      Configuring a Virtual Link
      Configuring Authentication
      Assigning a Designated Router
      Configuring Route Summaries
      Configuring Route Preferences
    OSPF Configuration Management Tasks
      Modifying a Router ID
      Deleting a Router ID
      Modifying OSPF Parameters
    OSPF Command Reference
      Command Hierarchies
        Configuration Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Global Commands
          Area Commands
          Interface/Virtual Link Commands
        Show Commands
        Clear Commands
        Debug Commands
  IS-IS
    In This Chapter
    Overview of IS-IS
      IS-IS Areas (Two-level Hierarchy)
      ISO Network Addressing
      Neighbors and Adjacencies
        Designated Routers
        IS-IS Packet Types
      Metrics
      Authentication
      Route Redistribution and Summarization
        Redistribution
        Summarization
      IS-IS-TE Extensions
      Bidirectional Forwarding Detection (BFD) for IS-IS
      Multi-Instance IS-IS (MI-IS-IS)
    IS-IS Configuration Process Overview
    Configuration Notes
      General
      Reference Sources
    Configuring IS-IS with CLI
    IS-IS Configuration Overview
      Router Levels
      Area Addresses
      Interface Level Capability
      Route Leaking
    Basic IS-IS Configuration
    Configuring IS-IS Components
      Enabling IS-IS
      Configuring an IS-IS Instance Level
      Configuring ISO Area Addresses
      Configuring Global IS-IS Parameters
      Configuring Interface Parameters
        Example 1: Configuring a Level 1 Area
        Example 2: Modifying Router Level Capability
      Configuring Leaking
      Redistributing External IS-IS Routers
    IS-IS Configuration Management Tasks
      Disabling IS-IS
      Removing IS-IS
      Modifying Global IS-IS Parameters
      Modifying IS-IS Interface Parameters
    IS-IS Command Reference
      Command Hierarchies
        Configuration Commands
        Show Commands
        Clear Commands
        Debug Commands
        Monitor Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Global Commands
          Interface Commands
        Show Commands
        Clear Commands
        Debug Commands
        Monitor Commands
  BGP
    In This Chapter
    BGP Overview
      BGP Communication
      Message Types
      BGP Add-Path
        Path Selection Mode and Parameters for Multiple Paths to Add-path Peers
        Routing Policy for Multiple Paths
        BGP Route Advertisement Rules for Multiple Paths
    Group Configuration and Peers
      Hierarchical Levels
      Route Reflection
      Fast External Failover
      Sending of BGP Communities
      Route Selection Criteria
    BGP Route Tunnels
      ECMP and BGP Route Tunnels
      Layer 2 Services and BGP Route Tunnel
      BGP Route Tunnel SDP Binding
      BGP Route Tunnel With Multihop EBGP Resolution
    Command Interactions and Dependencies
      Changing the Autonomous System Number
      Changing the Local AS Number
      Changing the Router ID at the Configuration Level
      Hold Time and Keepalive Timer Dependencies
      Import and Export Route Policies
      AS Override
      TTL Security
    BGP Configuration Process Overview
    Configuration Notes
      General
      BGP Defaults
      BGP MIB Notes
    Configuring BGP with CLI
    BGP Configuration Overview
      Preconfiguration Requirements
      BGP Hierarchy
      Internal and External BGP Configurations
      BGP Route Reflectors
    Basic BGP Configuration
    Common Configuration Tasks
      Creating an Autonomous System
      Configuring a Router ID
    BGP Components
      Configuring BGP
      Configuring Group Attributes
      Configuring Neighbor Attributes
      Configuring Route Reflection
    BGP Configuration Management Tasks
      Modifying an AS Number
      Modifying the BGP Router ID
      Modifying the Router-Level Router ID
      Deleting a Neighbor
      Deleting Groups
      Editing BGP Parameters
    BGP Command Reference
      Command Hierarchies
        Configuration Commands
          Global BGP Commands
          Group BGP Commands
          Neighbor BGP Commands
          Other BGP-Related Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        Configuration Commands
          Configuration Commands
          Other BGP-Related Commands
        Show Commands
        Clear Commands
        Debug Commands
  RIP
    In This Chapter
    RIP Overview
      RIP Versions
      RIPv2 Authentication
      Metrics
      Timers
      Import and Export Policies
      RIP Packet Format
      RIP Hierarchical Levels
    RIP Configuration Process Overview
    Configuration Notes
    Configuring RIP with CLI
    RIP Configuration Overview
      Preconfiguration Requirements
      RIP Hierarchy
    Basic RIP Configuration
    Common Configuration Tasks
      Configuring Interfaces
      Configuring a Route Policy
    Configuring RIP Parameters
      Configuring Global-Level Parameters
      Configuring Group-Level Parameters
      Configuring Neighbor-Level Parameters
    RIP Configuration Management Tasks
      Modifying RIP Parameters
      Deleting a RIP Group
      Deleting a RIP Neighbor
    RIP Command Reference
      Command Hierarchies
        Configuration Commands
          Global RIP Commands
          Group RIP Commands
          Neighbor RIP Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          RIP Commands
        Show Commands
        Clear Commands
        Debug Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR Routing Configuration Process
  IP Multicast
    In This Chapter
    Overview of IP Multicast
      Mobile Backhaul IP Multicast Example
      Source-Specific Multicast (SSM) versus Any-Source Multicast (ASM)
    IPv4 Multicast
      Internet Group Management Protocol (IGMP)
        IGMP Versions and Interoperability Requirements
        IGMP Version Transition
      PIM SSM for IPv4
    IPv6 Multicast
      Multicast Listener Discovery (MLDv1 and MLDv2)
      PIM SSM for IPv6
    PIM
      PIM Routing Tables
      PIM Routing Policies
      PIM Bootstrap Message Processing
    IP Multicast Debugging Tools
      Mtrace
        Finding the Last Hop Router
        Directing the Response
      Mstat
      Mrinfo
    Configuration Notes
      General
      Reference Sources
    IP Multicast Configuration Process Overview
    Configuring IP Multicast Parameters with CLI
    IP Multicast Configuration Overview
      IGMP and MLD
        Static Groups
        SSM Translation
      PIM
      Hardware Support
    Basic IP Multicast Configuration
    Common Configuration Tasks
      Configuring IGMP and MLD Parameters
        Enabling IGMP or MLD
        Configuring IGMP and MLD
        Configuring IGMP and MLD Interfaces
        Configuring IGMP and MLD Interface Static Multicast
        Configuring IGMP and MLD SSM Translation
      Configuring PIM Parameters
        Enabling PIM
        Configuring PIM Interface Parameters
        Importing PIM Join Policies
    Service Management Tasks
      Disabling IGMP, MLD, and PIM
    IP Multicast Command Reference
      Command Hierarchies
        Configuration Commands
          Configure Router IGMP Commands
          Configure Router MLD Commands
          Configure Router PIM Commands
        Show Commands
        Clear Commands
        Debug Commands
        Monitor Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Router IGMP Commands
          Router MLD Commands
          Router PIM Commands
        Show Commands
        Clear Commands
        Debug Commands
          Debug IGMP Commands
          Debug MLD Commands
          Debug PIM Commands
          Debug Mtrace Commands
        Monitor Commands
  OSPF
    In This Chapter
    Overview of OSPF
      OSPF Areas
        Backbone Area
        Stub Area
        Not-So-Stubby Area
      Virtual Links
      Neighbors and Adjacencies
        Designated Routers and Backup Designated Routers
      Link-State Advertisements
      Metrics
      Authentication
      Route Redistribution and Summarization
      OSPF-TE Extensions
      IP Subnets
      OSPF Instances
      Bidirectional Forwarding Detection (BFD) for OSPF
      Graceful Restart Helper
      Preconfiguration Requirements
    OSPF Configuration Process Overview
    Configuration Notes
      General
      Reference Sources
    Configuring OSPF with CLI
    OSPF Configuration Guidelines
    Basic OSPF Configuration
      Configuring the Router ID
      Configuring an OSPF Area
      Configuring an Interface
    Configuring Other OSPF Components
      Configuring a Stub Area
      Configuring a Not-So-Stubby Area
      Configuring a Virtual Link
      Configuring Authentication
      Assigning a Designated Router
      Configuring Route Summaries
      Configuring Route Preferences
    OSPF Configuration Management Tasks
      Modifying a Router ID
      Deleting a Router ID
      Modifying OSPF Parameters
    OSPF Command Reference
      Command Hierarchies
        Configuration Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Global Commands
          Area Commands
          Interface/Virtual Link Commands
        Show Commands
        Clear Commands
        Debug Commands
  IS-IS
    In This Chapter
    Overview of IS-IS
      IS-IS Areas (Two-level Hierarchy)
      ISO Network Addressing
      Neighbors and Adjacencies
        Designated Routers
        IS-IS Packet Types
      Metrics
      Authentication
      Route Redistribution and Summarization
        Redistribution
        Summarization
      IS-IS-TE Extensions
      Bidirectional Forwarding Detection (BFD) for IS-IS
      Multi-Instance IS-IS (MI-IS-IS)
    IS-IS Configuration Process Overview
    Configuration Notes
      General
      Reference Sources
    Configuring IS-IS with CLI
    IS-IS Configuration Overview
      Router Levels
      Area Addresses
      Interface Level Capability
      Route Leaking
    Basic IS-IS Configuration
    Configuring IS-IS Components
      Enabling IS-IS
      Configuring an IS-IS Instance Level
      Configuring ISO Area Addresses
      Configuring Global IS-IS Parameters
      Configuring Interface Parameters
        Example 1: Configuring a Level 1 Area
        Example 2: Modifying Router Level Capability
      Configuring Leaking
      Redistributing External IS-IS Routers
    IS-IS Configuration Management Tasks
      Disabling IS-IS
      Removing IS-IS
      Modifying Global IS-IS Parameters
      Modifying IS-IS Interface Parameters
    IS-IS Command Reference
      Command Hierarchies
        Configuration Commands
        Show Commands
        Clear Commands
        Debug Commands
        Monitor Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Global Commands
          Interface Commands
        Show Commands
        Clear Commands
        Debug Commands
        Monitor Commands
  BGP
    In This Chapter
    BGP Overview
      BGP Communication
      Message Types
      BGP Add-Path
        Path Selection Mode and Parameters for Multiple Paths to Add-path Peers
        Routing Policy for Multiple Paths
        BGP Route Advertisement Rules for Multiple Paths
    Group Configuration and Peers
      Hierarchical Levels
      Route Reflection
      Fast External Failover
      Sending of BGP Communities
      Route Selection Criteria
    BGP Route Tunnels
      ECMP and BGP Route Tunnels
      Layer 2 Services and BGP Route Tunnel
      BGP Route Tunnel SDP Binding
      BGP Route Tunnel With Multihop EBGP Resolution
    Command Interactions and Dependencies
      Changing the Autonomous System Number
      Changing the Local AS Number
      Changing the Router ID at the Configuration Level
      Hold Time and Keepalive Timer Dependencies
      Import and Export Route Policies
      AS Override
      TTL Security
    BGP Configuration Process Overview
    Configuration Notes
      General
      BGP Defaults
      BGP MIB Notes
    Configuring BGP with CLI
    BGP Configuration Overview
      Preconfiguration Requirements
      BGP Hierarchy
      Internal and External BGP Configurations
      BGP Route Reflectors
    Basic BGP Configuration
    Common Configuration Tasks
      Creating an Autonomous System
      Configuring a Router ID
    BGP Components
      Configuring BGP
      Configuring Group Attributes
      Configuring Neighbor Attributes
      Configuring Route Reflection
    BGP Configuration Management Tasks
      Modifying an AS Number
      Modifying the BGP Router ID
      Modifying the Router-Level Router ID
      Deleting a Neighbor
      Deleting Groups
      Editing BGP Parameters
    BGP Command Reference
      Command Hierarchies
        Configuration Commands
          Global BGP Commands
          Group BGP Commands
          Neighbor BGP Commands
          Other BGP-Related Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        Configuration Commands
          Configuration Commands
          Other BGP-Related Commands
        Show Commands
        Clear Commands
        Debug Commands
  RIP
    In This Chapter
    RIP Overview
      RIP Versions
      RIPv2 Authentication
      Metrics
      Timers
      Import and Export Policies
      RIP Packet Format
      RIP Hierarchical Levels
    RIP Configuration Process Overview
    Configuration Notes
    Configuring RIP with CLI
    RIP Configuration Overview
      Preconfiguration Requirements
      RIP Hierarchy
    Basic RIP Configuration
    Common Configuration Tasks
      Configuring Interfaces
      Configuring a Route Policy
    Configuring RIP Parameters
      Configuring Global-Level Parameters
      Configuring Group-Level Parameters
      Configuring Neighbor-Level Parameters
    RIP Configuration Management Tasks
      Modifying RIP Parameters
      Deleting a RIP Group
      Deleting a RIP Neighbor
    RIP Command Reference
      Command Hierarchies
        Configuration Commands
          Global RIP Commands
          Group RIP Commands
          Neighbor RIP Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          RIP Commands
        Show Commands
        Clear Commands
        Debug Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
7705 SAR OS Services Guide R6.1.R4
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR Services Configuration Process
  Services Overview
    In This Chapter
    Introduction to Services on the 7705 SAR
      Overview
      Service Types
      Service Policies
    Alcatel-Lucent Service Model
    Service Entities
      Customers
      Service Types
      Service Access Points (SAPs)
        SAP Encapsulation Types and Identifiers
          Ethernet Encapsulations
          SONET/SDH Encapsulations
          TDM and Serial (TDM) Encapsulations
          Service Types and SAP Encapsulations—Summary
        SAP Configuration Considerations
      Service Destination Points (SDPs)
        SDP Binding
        Spoke and Mesh SDPs
        SDPs and BGP Route Tunnels
        SDP Encapsulation Types
          MPLS Encapsulation
          GRE Encapsulation
          IP Encapsulation
        Spoke SDP Terminations
        SDP Ping
        SDP Keepalives
    Mobile Solutions
      HSDPA Offload
        Failure Detection
      Pure DSL Backhaul
        DSL Channel Bonding
    ETH-CFM (802.1ag and Y.1731)
      802.1ag and Y.1731 Terminology
        MDs, MD Levels, MAs, and MEPs (802.1ag)
        MEG Levels, MEGs, and MEPs (Y.1731)
      ETH-CFM Frame Format
        ETH-CFM OAMPDU
        CFM Frame Processing
          Processing SAP 0 and SAP 0.* OAM Packets
        MEG-ID and ICC-Based Format
      ETH-CFM Functions and Tests
        ETH-CFM Ethernet OAM Tests
          Loopback (LB)
          Linktrace (LT)
          Throughput Measurement
          Continuity Check (CC)
          ETH-RDI
          ETH-AIS
          ETH-Test
      MEP Support (802.1ag and Y.1731)
        802.1ag MEP Support on Ethernet SAPs
        802.1ag MEP Support on Ethernet Spoke SDPs
        Y.1731 MEP Support on Ethernet SAPs
      Priority Mapping (802.1ag and Y.1731)
        Priority Mapping for SAP Up MEPs
        Priority Mapping for SAP Down MEPs
    QinQ Support
      Overview of QinQ
      QinQ Support with Forced C-Tag Forwarding (VPLS only)
        Example 1: General QinQ Implementation
        Example 2: QinQ using VPLS with Ethernet SAPs
        Example 3: QinQ Using VPLS with ATM SAPs
      QinQ Support on Ethernet Ports
        Special QinQ SAP Identifiers
        QinQ Dot1p Match Behavior
        QinQ Top-Only Mark Option
        Maximum Number of VLAN Tags
      QinQ Configuration Overview
    Service Creation Overview
    Port and SAP CLI Identifiers
      Reference Sources
    Configuring Global Service Entities with CLI
    Service Model Entities
    Basic Configuration
    Common Configuration Tasks
      Configuring Customer Accounts
      Configuring SDPs
        SDP Configuration Considerations
        Configuring an SDP
    ETH-CFM (802.1ag and Y.1731) Tasks
      Configuring ETH-CFM Parameters (802.1ag and Y.1731)
      Applying ETH-CFM Parameters
    Service Management Tasks
      Modifying Customer Accounts
      Deleting Customers
      Modifying SDPs
      Deleting SDPs
      Deleting LSP Associations
    Global Service Command Reference
      Command Hierarchies
        Global Service Configuration Commands
          Customer Commands
          SDP Commands
          SAP Commands
          ETH-CFM Commands
        Show Commands
      Command Descriptions
        Global Service Configuration Commands
          Generic Commands
          Customer Commands
          SDP Commands
          SDP Keepalive Commands
        Show Commands
  VLL Services
    In This Chapter
    ATM VLL (Apipe) Services
      ATM VLL for End-to-End ATM Service
      ATM Virtual Trunk Over an IP/MPLS Packet-Switched Network
      ATM SAP-to-SAP Service
      ATM Traffic Management Support
        Network Ingress Classification
        ATM Access Egress Queuing and Shaping
      Control Word
    Circuit Emulation VLL (Cpipe) Services
      Cpipe Service Overview
      TDM SAP-to-SAP Service
      Cpipe Service Modes
        Unstructured Mode (SAToP)
        Structured Mode (CESoPSN)
      TDM PW Encapsulation
      Circuit Emulation Parameters and Options
        Unstructured
        Structured DS1/E1 CES without CAS
        Structured T1/E1 CES with CAS
        Packet Payload Size
        Jitter Buffer
        RTP Header
        Control Word
      Error Situations
    Ethernet VLL (Epipe) Services
      Epipe Service Overview
      Ethernet Access Egress Queuing and Scheduling
      Ethernet SAP-to-SAP
      MEF 8
        Epipe Service Modes
      Ethernet OAM
      Control Word
      MTU
      Raw and Tagged Modes
        Raw Mode
        Tagged Mode
        VLAN Translation
        Tagging Rules for Epipe
      IP Filters (Epipe)
    Frame Relay VLL (Fpipe) Services
      Fpipe Service Overview
      FR SAP-to-SAP Service
      FR Traffic Management
        Ingress SAP Classification and Marking
      FR Encapsulation
        FR PW Control Word
      Status Signaling and OAM Propagation
    HDLC VLL (Hpipe) Services
      Hpipe Service Overview
      HDLC VLL for End-to-End HDLC Service
      HDLC SAP-to-SAP Service
      HDLC Encapsulation
        HDLC PW Control Word and Payload Size
      Status Signaling
        OAM Propagation
    IP Interworking VLL (Ipipe) Services
      Ipipe Service Overview
      IP Interworking VLL Datapath
      CE IP Address Discovery and Distribution
        Manual IP Configuration
        CE IP Address Discovery Using ARP
        CE IP Address Discovery for Frame Relay
        CE IP Address Discovery for cHDLC
        CE IP Address Discovery for PPP/MLPPP
        CE IP Address Distribution to Remote PE Nodes
      IP SAP-to-SAP Service
      Hardware Support for Interworking IP PWs
      Control Word
      Termination at Access
        PPP and MLPPP Termination
        FR Termination
        cHDLC Termination
        PPP and MLPPP Termination on 2-port OC3/STM1 Channelized Adapter Cards
      Traffic Management
        Traffic Management for FR IW SAPs
      Status Signaling
        FR LMI
      IP Filters (Ipipe)
    Pseudowire Switching
      Overview
      Pseudowire Switching with Pseudowire Redundancy
      Pseudowire Switching Behavior
        Pseudowire Switching With IP Tunnels
      Pseudowire Switching TLV
    VLL Service Considerations
      Service Support
      SDPs
        SDP Statistics for VLL Services
      SAP Encapsulations and Pseudowire Types
      ATM PWE3 N-to-1 Cell Mode Encapsulation
        N-to-1 Cell Mode Encapsulation (N = 1)
          Deployment Scenario for N = 1 Cell Mode Encapsulation
          VPI/VCI Translation (N = 1)
          Cell Concatenation (N = 1)
          QoS and Traffic Descriptor Profiles (N = 1)
          OAM (N = 1)
        N-to-1 Cell Mode Encapsulation (N > 1)
          Deployment Scenario for N > 1 Cell Mode Encapsulation
          PW Optimization (N > 1)
          Overhead Optimization (N > 1)
          Cell Concatenation (N > 1)
          OAM (N > 1)
          Hardware Support for N > 1 Cell Mode Encapsulation
          SAP Support for N > 1
      SAP Aggregation Groups
        Configuration
          Sap-aggregation-group Keyword
          Sap-aggregation-group Group Identifier
          VPI/VCI Translation for SAP Aggregation Group Members (N>1)
        QoS and Traffic Descriptor Profiles (N > 1)
        Statistics and Counters
        Fault Management
      QoS Policies
      IP Filter Policies
      MTU Settings
        Targeted LDP and MTU
      QinQ (VLL Service)
      Pseudowire Control Word
      Pseudowire Redundancy
        PW Redundancy Operation
        Selecting the Active Spoke SDP for PW Redundancy Configuration
          Primary and Secondary Spoke SDPs
          Secondary Spoke SDPs Only
        PW Redundancy and Inter-Chassis Backup
      Active/Standby Mode for Pseudowire Redundancy (Standby Signaling)
        PW Status Signaling Label Withdrawal Option
    Configuring a VLL Service with CLI
    Common Configuration Tasks
    Configuring VLL Components
      Creating an Apipe Service
        Configuring Apipe SAP Parameters
        Configuring Apipe SDP Bindings
        Configuring Apipe SAP Aggregation Groups
        Configuring Apipe SAPs as Aggregation Group Members
      Creating a Cpipe Service
        Configuring Cpipe SAP Parameters
        Configuring Cpipe SDP Bindings
      Creating an Epipe Service
        Configuring Epipe SAP Parameters
        Configuring Epipe SAP MEF 8 Parameters
        Configuring Epipe SAP Microwave Link Parameters for Interworking with TDM2Ethernet
        Configuring Epipe Spoke SDP Bindings
      Creating an Fpipe Service
        Configuring Fpipe SAP Parameters
        Configuring Fpipe SDP Bindings
      Creating an Hpipe Service
        Configuring Hpipe SAP Parameters
        Configuring Hpipe SDP Bindings
      Creating an Ipipe Service
        Configuring Ipipe SAP Parameters
        Configuring Ipipe SDP Bindings
      Configuring PW Switching
      Configuring Ingress and Egress SAP Parameters
      Using the Control Word
      Configuring PW Redundancy
        Configuring PW Redundancy—Standby Signaling
        Configuring PW Redundancy—ICB
    Service Management Tasks
      Modifying Service Parameters
      Disabling a Service
      Re-enabling a Service
      Deleting a Service
    VLL Services Command Reference
      Command Hierarchies
        VLL Services Configuration Commands
          Apipe Service Configuration Commands
          Apipe Service with SAP Aggregation Configuration Commands
          Cpipe Service Configuration Commands
          Epipe Service Configuration Commands
          Fpipe Service Configuration Commands
          Hpipe Service Configuration Commands
          Ipipe Service Configuration Commands
        Show Commands
        Clear Commands
      Command Descriptions
        VLL Service Configuration Command Descriptions
          Generic Commands
          VLL Global Commands
          VLL SAP Commands
          SAP Aggregation Group Commands
          SAP cem Commands
          SAP QoS and IP Filter Policy Commands
          SAP Microwave Link Commands
          Service Billing Commands
          VLL SDP Commands
          SDP Cell Concatenation Commands
          ATM Commands
          ATM OAM Commands
        Show Command Descriptions
        Clear Command Descriptions
  VPLS
    In This Chapter
    VPLS Overview
      VPLS Packet Walkthrough
      Bridged Mobile Backhaul
      Multi-Tenant Unit (MTU) Termination
    VPLS Features
      VPLS Enhancements
      Fabric Mode
      Subscriber VLAN
      ATM Encapsulated Residential SAP
      VPLS over MPLS
      VPLS MAC Learning and Packet Forwarding
      Pseudowire Control Word
      Agent Circuit ID Insertion
      MAC Filters
      FDB Table Management
        FDB Size
        FDB Size Alarms
        Local and Remote Aging Timers
          Disable MAC Aging
          Disable MAC Learning
        Unknown MAC Discard
      VPLS and Rate Limiting Via QoS Policy
      MAC Move
      Split Horizon Groups (SAP and Spoke SDP)
        Residential Split Horizon Groups
    Routed VPLS
      IES or VPRN IP Interface Binding
        Assigning a Service Name to a VPLS Service
        Binding a Service Name to an IP Interface
        Removing a Bound VPLS Service or Service Name
        IP Interface and VPLS Operational State Coordination
      IP Interface MTU and Fragmentation
      ARP and VPLS FIB Interactions
        Routed VPLS Specific ARP Cache Behavior
      The allow-ip-int-binding VPLS Flag
        VPLS Feature Restrictions (due to allow-ip-int-binding)
      DSCP Marking
      VPLS SAP Ingress IP Filter Override
      Routed VPLS Supported Routing-Related Protocols
    VPLS and Spanning Tree Protocol
      VPLS Redundancy
        Spoke SDP-Based Redundant Access
      VPLS Access Redundancy
      MAC Flush Message Processing
    ATM PVC Access and Termination on a VPLS Service
    VPLS Service Considerations
      SAP Encapsulations
      VLAN Processing
        Tagging Rules for VPLS
      QinQ (VPLS)
    Configuration Notes
      Reference Sources
    Configuring a VPLS Service with CLI
    Basic Configuration
    Common Configuration Tasks
    Configuring VPLS Components
      Creating a VPLS Service
      Creating a Split Horizon Group
      Enabling MAC Move
      Configuring STP Bridge Parameters in a VPLS
        Bridge STP Admin State
        Mode
        Bridge Priority
        Hello Time
        Hold Count
    Configuring a VPLS SAP
      Local VPLS SAPs
      Distributed VPLS SAPs
      Configuring SAP-Specific STP Parameters
        SAP STP Administrative State
        SAP Virtual Port Number
        SAP Priority
        SAP Path Cost
        SAP Edge Port
        SAP Auto Edge
        SAP Link Type
      STP SAP Operational States
        Operationally Disabled
        Operationally Discarding
        Operationally Learning
        Operationally Forwarding
      Configuring VPLS SAPs with Split Horizon
    Configuring SDP Bindings
      Configuring Mesh SDP Bindings
      Configuring Spoke SDP Bindings
      Configuring VPLS Spoke SDPs with Split Horizon
      Configuring Selective MAC Flush
    Service Management Tasks
      Modifying VPLS Service Parameters
      Modifying Management VPLS Parameters
      Deleting a Management VPLS
      Disabling a Management VPLS
      Deleting a VPLS Service
      Disabling a VPLS Service
      Re-enabling a VPLS Service
    VPLS Command Reference
      Command Hierarchies
        VPLS Service Configuration Commands
          Global Commands
          SAP Commands
          Mesh SDP Commands
          Spoke SDP Commands
          Routed VPLS Commands
          Show Commands
          Clear Commands
          Debug Commands
      Command Descriptions
        VPLS Service Configuration Commands
          Generic Commands
          VPLS Service Commands
          VPLS SAP Commands
          VPLS SAP ATM Commands
          VPLS STP Commands
          VPLS Filter and QoS Policy Commands
          Service Billing Commands
          VPLS SAP DHCP Commands
          VPLS SDP Commands
        Routed VPLS Commands
        VPLS Show Commands
        VPLS Clear Commands
        VPLS Debug Commands
  Internet Enhanced Service
    In This Chapter
    IES for In-band Management
      Setting Up Connections Between the 5620 SAM and the 7705 SAR
      Encapsulation
      Layer 2 and Layer 3 Traffic Management
      Troubleshooting and Fault Detection Services
      IP ECMP Load Balancing
    IES for Customer Traffic
      DHCP Relay and DHCPv6 Relay
        DHCP Relay
          DHCP Options
        DHCPv6 Relay
          DHCPv6 Options
      IPCP
      IPSec Support
      NAT and IES
      Proxy ARP
      Troubleshooting and Fault Detection Services
      SAPs
        Encapsulations
        Routing Protocols
        QoS Policies
        QinQ (IES)
        IP Filter Policies on an IES SAP
      Spoke SDP Termination to IES
    Configuring IES with CLI
    Common Configuration Tasks
    Configuring IES Components
      Creating an IES Service
      Configuring Interface Parameters
        IES Management Service
        IES Service
        IES IPv6 Service
      Configuring IES SAP Parameters
        IES Management SAP
        IES Service SAP
      Configuring IES Spoke SDP Parameters
      Configuring VRRP
      Configuring a NAT Zone within IES
    Service Management Tasks
      Modifying IES Service Parameters
      Disabling an IES Service
      Re-enabling an IES Service
      Deleting an IES Service
    IES Command Reference
      Command Hierarchies
        IES Management Configuration Commands
        IES Service Configuration Commands
        Routed VPLS Commands
        VRRP Commands
        IES NAT Configuration Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        IES Management Configuration Commands
          Generic Commands
          IES Global Commands
          IES Management Interface Commands
          IES Management SAP Commands
        IES Service Configuration Commands
          IES Service Interface Commands
          IES Service IPv6 Commands
          IES Service VRRP Commands
          IES Service SAP Commands
          IES Service Spoke SDP Commands
          Routed VPLS Commands
          IES Service NAT Configuration Commands
        Show Commands
        Clear Commands
        Debug Commands
  VPRN Services
    In This Chapter
    VPRN Service Overview
      Routing Prerequisites
      BGP Support
      IPSec Support
      NAT and VPRN
      Route Distinguishers
        PE-to-CE Route Exchange
          Route Redistribution
          CPE Connectivity Check
      In-Band Management using a VPRN
    VPRN Features
      IP Interfaces
        DHCP
          DHCP Relay
          Local DHCP Server
        IPCP
        Troubleshooting and Fault Detection Services
        IP ECMP Load Balancing
        Proxy ARP
      SAPs
        Encapsulations
        QoS Policies
        CoS Marking for Self-generated Traffic
        QinQ (VPRN)
        Filter Policies on a VPRN SAP
      PE-to-CE Routing Protocols
        Using OSPF in IP VPNs
        TTL Security
      PE-to-PE Tunneling Mechanisms
      Per-VRF Route Limiting
      RIP Metric Propagation in VPRNs
      Spoke SDPs
      Spoke SDP Termination to VPRN
    Configuring a VPRN Service with CLI
    Basic Configuration
    Common Configuration Tasks
    Configuring VPRN Components
      Creating a VPRN Service
      Configuring Global VPRN Parameters
      Configuring Router Interfaces
      Configuring BGP for VPRN
        Configuring VPRN BGP Group and Neighbor Parameters
        VPRN BGP CLI Syntax
      Configuring OSPF for VPRN
      Configuring RIP for VPRN
      Configuring a VPRN Interface
      Configuring VPRN Interface SAP Parameters
      Configuring VPRN Interface Spoke SDP Parameters
      Configuring VRRP
    Service Management Tasks
      Modifying VPRN Service Parameters
      Deleting a VPRN Service
      Disabling a VPRN Service
      Re-enabling a VPRN Service
      Configuring a NAT Zone within VPRN
    VPRN Services Command Reference
      Command Hierarchies
        Configuration Commands
          VPRN Service Configuration Commands
          BGP Commands
          OSPF Commands
          RIP Commands
          VPRN NAT Configuration Commands
          Local DHCP Server Commands
          Interface Commands
          Interface DHCP Commands
          Interface ICMP Commands
          Interface SAP IPSec-Tunnel Commands
          Routed VPLS Commands
          Interface VRRP Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        VPRN Service Configuration Commands
          Generic Commands
          Global Commands
          BGP Commands
          OSPF Commands
          RIP Commands
          VPRN NAT Configuration Commands
          Local DHCP Server Commands
          Interface Commands
          Interface DHCP Commands
          Interface ICMP Commands
          Interface SAP Commands
          Interface Spoke SDP Commands
          Routed VPLS Commands
          Interface VRRP Commands
        Show Service Commands
        Show Router Commands
        Clear Service Commands
        Clear Router Commands
        Debug Service Commands
        Debug Router Commands
  IPSec
    In This Chapter
    IPSec Overview
      IPSec Implementation
        IPSec Overview
        Hardware Support
        IPSec Encryption Features
        IPSec Security Policy, IKE Policy, and IPSec Transform
        Tunnel Group
        Tunnel Interfaces and SAPs
          Public Tunnel SAPs
          Private Tunnel SAPs
          IP Interface Configuration
        IPSec Tunnel Configuration
      Applications
        Metrocell Deployment
        Small Business Deployment
      NAT-Traversal for IKEv2 and IPSec
      BFD over IPSec Tunnel
      QoS for IPSec
        Network and Access Ingress QoS (Decryption QoS)
        Network and Access Egress QoS (Encryption QoS)
      Fragmentation and IP MTU
        Fragmentation Configuration
        Reassembly
      Support for Private VPRN Service Features
      Routing in Private Services
      IPSec on the 10-port 1GigE/1-port 10GigE X-Adapter Card
      IPSec Sequence Number
      PBR and MFC
        PBR
        MFC
      Statistics
    Best Practices Recommendations
      IPSec Best Practices
    Configuration Notes
      Reference Sources
    Configuring IPSec with CLI
    Basic Configuration Overview
    Common Configuration Tasks
      Configuring an IPSec Tunnel Group
      Configuring Router Interfaces for IPSec
      Configuring IPSec Parameters
      Configuring IPSec and IPSec Tunnels in Services
    Service Management Tasks
      Deleting an IPSec IKE Policy or an IPSec Transform
      Deleting a Public IPSec Tunnel SAP and Interface
      Deleting a Private IPSec Tunnel SAP and Interface
      Deleting an IPSec Security Policy
      Deleting an IPSec Tunnel
    IPSec Command Reference
      Command Hierarchies
        IPSec Configuration Commands
          ISA Tunnel Commands
          IPSec Commands
          Service Configuration Commands
          Service Interface Tunnel Commands
          Service Static Route Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        IPSec Configuration Commands
          Generic Commands
          ISA Tunnel Commands
          Internet Key Exchange (IKE) and Transform Commands
          Service Configuration Commands
          Service Interface Tunnel Commands
        Show Commands
        Clear Commands
        Debug Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR Services Configuration Process
  Services Overview
    In This Chapter
    Introduction to Services on the 7705 SAR
      Overview
      Service Types
      Service Policies
    Alcatel-Lucent Service Model
    Service Entities
      Customers
      Service Types
      Service Access Points (SAPs)
        SAP Encapsulation Types and Identifiers
          Ethernet Encapsulations
          SONET/SDH Encapsulations
          TDM and Serial (TDM) Encapsulations
          Service Types and SAP Encapsulations—Summary
        SAP Configuration Considerations
      Service Destination Points (SDPs)
        SDP Binding
        Spoke and Mesh SDPs
        SDPs and BGP Route Tunnels
        SDP Encapsulation Types
          MPLS Encapsulation
          GRE Encapsulation
          IP Encapsulation
        Spoke SDP Terminations
        SDP Ping
        SDP Keepalives
    Mobile Solutions
      HSDPA Offload
        Failure Detection
      Pure DSL Backhaul
        DSL Channel Bonding
    ETH-CFM (802.1ag and Y.1731)
      802.1ag and Y.1731 Terminology
        MDs, MD Levels, MAs, and MEPs (802.1ag)
        MEG Levels, MEGs, and MEPs (Y.1731)
      ETH-CFM Frame Format
        ETH-CFM OAMPDU
        CFM Frame Processing
          Processing SAP 0 and SAP 0.* OAM Packets
        MEG-ID and ICC-Based Format
      ETH-CFM Functions and Tests
        ETH-CFM Ethernet OAM Tests
          Loopback (LB)
          Linktrace (LT)
          Throughput Measurement
          Continuity Check (CC)
          ETH-RDI
          ETH-AIS
          ETH-Test
      MEP Support (802.1ag and Y.1731)
        802.1ag MEP Support on Ethernet SAPs
        802.1ag MEP Support on Ethernet Spoke SDPs
        Y.1731 MEP Support on Ethernet SAPs
      Priority Mapping (802.1ag and Y.1731)
        Priority Mapping for SAP Up MEPs
        Priority Mapping for SAP Down MEPs
    QinQ Support
      Overview of QinQ
      QinQ Support with Forced C-Tag Forwarding (VPLS only)
        Example 1: General QinQ Implementation
        Example 2: QinQ using VPLS with Ethernet SAPs
        Example 3: QinQ Using VPLS with ATM SAPs
      QinQ Support on Ethernet Ports
        Special QinQ SAP Identifiers
        QinQ Dot1p Match Behavior
        QinQ Top-Only Mark Option
        Maximum Number of VLAN Tags
      QinQ Configuration Overview
    Service Creation Overview
    Port and SAP CLI Identifiers
      Reference Sources
    Configuring Global Service Entities with CLI
    Service Model Entities
    Basic Configuration
    Common Configuration Tasks
      Configuring Customer Accounts
      Configuring SDPs
        SDP Configuration Considerations
        Configuring an SDP
    ETH-CFM (802.1ag and Y.1731) Tasks
      Configuring ETH-CFM Parameters (802.1ag and Y.1731)
      Applying ETH-CFM Parameters
    Service Management Tasks
      Modifying Customer Accounts
      Deleting Customers
      Modifying SDPs
      Deleting SDPs
      Deleting LSP Associations
    Global Service Command Reference
      Command Hierarchies
        Global Service Configuration Commands
          Customer Commands
          SDP Commands
          SAP Commands
          ETH-CFM Commands
        Show Commands
      Command Descriptions
        Global Service Configuration Commands
          Generic Commands
          Customer Commands
          SDP Commands
          SDP Keepalive Commands
        Show Commands
  VLL Services
    In This Chapter
    ATM VLL (Apipe) Services
      ATM VLL for End-to-End ATM Service
      ATM Virtual Trunk Over an IP/MPLS Packet-Switched Network
      ATM SAP-to-SAP Service
      ATM Traffic Management Support
        Network Ingress Classification
        ATM Access Egress Queuing and Shaping
      Control Word
    Circuit Emulation VLL (Cpipe) Services
      Cpipe Service Overview
      TDM SAP-to-SAP Service
      Cpipe Service Modes
        Unstructured Mode (SAToP)
        Structured Mode (CESoPSN)
      TDM PW Encapsulation
      Circuit Emulation Parameters and Options
        Unstructured
        Structured DS1/E1 CES without CAS
        Structured T1/E1 CES with CAS
        Packet Payload Size
        Jitter Buffer
        RTP Header
        Control Word
      Error Situations
    Ethernet VLL (Epipe) Services
      Epipe Service Overview
      Ethernet Access Egress Queuing and Scheduling
      Ethernet SAP-to-SAP
      MEF 8
        Epipe Service Modes
      Ethernet OAM
      Control Word
      MTU
      Raw and Tagged Modes
        Raw Mode
        Tagged Mode
        VLAN Translation
        Tagging Rules for Epipe
      IP Filters (Epipe)
    Frame Relay VLL (Fpipe) Services
      Fpipe Service Overview
      FR SAP-to-SAP Service
      FR Traffic Management
        Ingress SAP Classification and Marking
      FR Encapsulation
        FR PW Control Word
      Status Signaling and OAM Propagation
    HDLC VLL (Hpipe) Services
      Hpipe Service Overview
      HDLC VLL for End-to-End HDLC Service
      HDLC SAP-to-SAP Service
      HDLC Encapsulation
        HDLC PW Control Word and Payload Size
      Status Signaling
        OAM Propagation
    IP Interworking VLL (Ipipe) Services
      Ipipe Service Overview
      IP Interworking VLL Datapath
      CE IP Address Discovery and Distribution
        Manual IP Configuration
        CE IP Address Discovery Using ARP
        CE IP Address Discovery for Frame Relay
        CE IP Address Discovery for cHDLC
        CE IP Address Discovery for PPP/MLPPP
        CE IP Address Distribution to Remote PE Nodes
      IP SAP-to-SAP Service
      Hardware Support for Interworking IP PWs
      Control Word
      Termination at Access
        PPP and MLPPP Termination
        FR Termination
        cHDLC Termination
        PPP and MLPPP Termination on 2-port OC3/STM1 Channelized Adapter Cards
      Traffic Management
        Traffic Management for FR IW SAPs
      Status Signaling
        FR LMI
      IP Filters (Ipipe)
    Pseudowire Switching
      Overview
      Pseudowire Switching with Pseudowire Redundancy
      Pseudowire Switching Behavior
        Pseudowire Switching With IP Tunnels
      Pseudowire Switching TLV
    VLL Service Considerations
      Service Support
      SDPs
        SDP Statistics for VLL Services
      SAP Encapsulations and Pseudowire Types
      ATM PWE3 N-to-1 Cell Mode Encapsulation
        N-to-1 Cell Mode Encapsulation (N = 1)
          Deployment Scenario for N = 1 Cell Mode Encapsulation
          VPI/VCI Translation (N = 1)
          Cell Concatenation (N = 1)
          QoS and Traffic Descriptor Profiles (N = 1)
          OAM (N = 1)
        N-to-1 Cell Mode Encapsulation (N > 1)
          Deployment Scenario for N > 1 Cell Mode Encapsulation
          PW Optimization (N > 1)
          Overhead Optimization (N > 1)
          Cell Concatenation (N > 1)
          OAM (N > 1)
          Hardware Support for N > 1 Cell Mode Encapsulation
          SAP Support for N > 1
      SAP Aggregation Groups
        Configuration
          Sap-aggregation-group Keyword
          Sap-aggregation-group Group Identifier
          VPI/VCI Translation for SAP Aggregation Group Members (N>1)
        QoS and Traffic Descriptor Profiles (N > 1)
        Statistics and Counters
        Fault Management
      QoS Policies
      IP Filter Policies
      MTU Settings
        Targeted LDP and MTU
      QinQ (VLL Service)
      Pseudowire Control Word
      Pseudowire Redundancy
        PW Redundancy Operation
        Selecting the Active Spoke SDP for PW Redundancy Configuration
          Primary and Secondary Spoke SDPs
          Secondary Spoke SDPs Only
        PW Redundancy and Inter-Chassis Backup
      Active/Standby Mode for Pseudowire Redundancy (Standby Signaling)
        PW Status Signaling Label Withdrawal Option
    Configuring a VLL Service with CLI
    Common Configuration Tasks
    Configuring VLL Components
      Creating an Apipe Service
        Configuring Apipe SAP Parameters
        Configuring Apipe SDP Bindings
        Configuring Apipe SAP Aggregation Groups
        Configuring Apipe SAPs as Aggregation Group Members
      Creating a Cpipe Service
        Configuring Cpipe SAP Parameters
        Configuring Cpipe SDP Bindings
      Creating an Epipe Service
        Configuring Epipe SAP Parameters
        Configuring Epipe SAP MEF 8 Parameters
        Configuring Epipe SAP Microwave Link Parameters for Interworking with TDM2Ethernet
        Configuring Epipe Spoke SDP Bindings
      Creating an Fpipe Service
        Configuring Fpipe SAP Parameters
        Configuring Fpipe SDP Bindings
      Creating an Hpipe Service
        Configuring Hpipe SAP Parameters
        Configuring Hpipe SDP Bindings
      Creating an Ipipe Service
        Configuring Ipipe SAP Parameters
        Configuring Ipipe SDP Bindings
      Configuring PW Switching
      Configuring Ingress and Egress SAP Parameters
      Using the Control Word
      Configuring PW Redundancy
        Configuring PW Redundancy—Standby Signaling
        Configuring PW Redundancy—ICB
    Service Management Tasks
      Modifying Service Parameters
      Disabling a Service
      Re-enabling a Service
      Deleting a Service
    VLL Services Command Reference
      Command Hierarchies
        VLL Services Configuration Commands
          Apipe Service Configuration Commands
          Apipe Service with SAP Aggregation Configuration Commands
          Cpipe Service Configuration Commands
          Epipe Service Configuration Commands
          Fpipe Service Configuration Commands
          Hpipe Service Configuration Commands
          Ipipe Service Configuration Commands
        Show Commands
        Clear Commands
      Command Descriptions
        VLL Service Configuration Command Descriptions
          Generic Commands
          VLL Global Commands
          VLL SAP Commands
          SAP Aggregation Group Commands
          SAP cem Commands
          SAP QoS and IP Filter Policy Commands
          SAP Microwave Link Commands
          Service Billing Commands
          VLL SDP Commands
          SDP Cell Concatenation Commands
          ATM Commands
          ATM OAM Commands
        Show Command Descriptions
        Clear Command Descriptions
  VPLS
    In This Chapter
    VPLS Overview
      VPLS Packet Walkthrough
      Bridged Mobile Backhaul
      Multi-Tenant Unit (MTU) Termination
    VPLS Features
      VPLS Enhancements
      Fabric Mode
      Subscriber VLAN
      ATM Encapsulated Residential SAP
      VPLS over MPLS
      VPLS MAC Learning and Packet Forwarding
      Pseudowire Control Word
      Agent Circuit ID Insertion
      MAC Filters
      FDB Table Management
        FDB Size
        FDB Size Alarms
        Local and Remote Aging Timers
          Disable MAC Aging
          Disable MAC Learning
        Unknown MAC Discard
      VPLS and Rate Limiting Via QoS Policy
      MAC Move
      Split Horizon Groups (SAP and Spoke SDP)
        Residential Split Horizon Groups
    Routed VPLS
      IES or VPRN IP Interface Binding
        Assigning a Service Name to a VPLS Service
        Binding a Service Name to an IP Interface
        Removing a Bound VPLS Service or Service Name
        IP Interface and VPLS Operational State Coordination
      IP Interface MTU and Fragmentation
      ARP and VPLS FIB Interactions
        Routed VPLS Specific ARP Cache Behavior
      The allow-ip-int-binding VPLS Flag
        VPLS Feature Restrictions (due to allow-ip-int-binding)
      DSCP Marking
      VPLS SAP Ingress IP Filter Override
      Routed VPLS Supported Routing-Related Protocols
    VPLS and Spanning Tree Protocol
      VPLS Redundancy
        Spoke SDP-Based Redundant Access
      VPLS Access Redundancy
      MAC Flush Message Processing
    ATM PVC Access and Termination on a VPLS Service
    VPLS Service Considerations
      SAP Encapsulations
      VLAN Processing
        Tagging Rules for VPLS
      QinQ (VPLS)
    Configuration Notes
      Reference Sources
    Configuring a VPLS Service with CLI
    Basic Configuration
    Common Configuration Tasks
    Configuring VPLS Components
      Creating a VPLS Service
      Creating a Split Horizon Group
      Enabling MAC Move
      Configuring STP Bridge Parameters in a VPLS
        Bridge STP Admin State
        Mode
        Bridge Priority
        Hello Time
        Hold Count
    Configuring a VPLS SAP
      Local VPLS SAPs
      Distributed VPLS SAPs
      Configuring SAP-Specific STP Parameters
        SAP STP Administrative State
        SAP Virtual Port Number
        SAP Priority
        SAP Path Cost
        SAP Edge Port
        SAP Auto Edge
        SAP Link Type
      STP SAP Operational States
        Operationally Disabled
        Operationally Discarding
        Operationally Learning
        Operationally Forwarding
      Configuring VPLS SAPs with Split Horizon
    Configuring SDP Bindings
      Configuring Mesh SDP Bindings
      Configuring Spoke SDP Bindings
      Configuring VPLS Spoke SDPs with Split Horizon
      Configuring Selective MAC Flush
    Service Management Tasks
      Modifying VPLS Service Parameters
      Modifying Management VPLS Parameters
      Deleting a Management VPLS
      Disabling a Management VPLS
      Deleting a VPLS Service
      Disabling a VPLS Service
      Re-enabling a VPLS Service
    VPLS Command Reference
      Command Hierarchies
        VPLS Service Configuration Commands
          Global Commands
          SAP Commands
          Mesh SDP Commands
          Spoke SDP Commands
          Routed VPLS Commands
          Show Commands
          Clear Commands
          Debug Commands
      Command Descriptions
        VPLS Service Configuration Commands
          Generic Commands
          VPLS Service Commands
          VPLS SAP Commands
          VPLS SAP ATM Commands
          VPLS STP Commands
          VPLS Filter and QoS Policy Commands
          Service Billing Commands
          VPLS SAP DHCP Commands
          VPLS SDP Commands
        Routed VPLS Commands
        VPLS Show Commands
        VPLS Clear Commands
        VPLS Debug Commands
  Internet Enhanced Service
    In This Chapter
    IES for In-band Management
      Setting Up Connections Between the 5620 SAM and the 7705 SAR
      Encapsulation
      Layer 2 and Layer 3 Traffic Management
      Troubleshooting and Fault Detection Services
      IP ECMP Load Balancing
    IES for Customer Traffic
      DHCP Relay and DHCPv6 Relay
        DHCP Relay
          DHCP Options
        DHCPv6 Relay
          DHCPv6 Options
      IPCP
      IPSec Support
      NAT and IES
      Proxy ARP
      Troubleshooting and Fault Detection Services
      SAPs
        Encapsulations
        Routing Protocols
        QoS Policies
        QinQ (IES)
        IP Filter Policies on an IES SAP
      Spoke SDP Termination to IES
    Configuring IES with CLI
    Common Configuration Tasks
    Configuring IES Components
      Creating an IES Service
      Configuring Interface Parameters
        IES Management Service
        IES Service
        IES IPv6 Service
      Configuring IES SAP Parameters
        IES Management SAP
        IES Service SAP
      Configuring IES Spoke SDP Parameters
      Configuring VRRP
      Configuring a NAT Zone within IES
    Service Management Tasks
      Modifying IES Service Parameters
      Disabling an IES Service
      Re-enabling an IES Service
      Deleting an IES Service
    IES Command Reference
      Command Hierarchies
        IES Management Configuration Commands
        IES Service Configuration Commands
        Routed VPLS Commands
        VRRP Commands
        IES NAT Configuration Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        IES Management Configuration Commands
          Generic Commands
          IES Global Commands
          IES Management Interface Commands
          IES Management SAP Commands
        IES Service Configuration Commands
          IES Service Interface Commands
          IES Service IPv6 Commands
          IES Service VRRP Commands
          IES Service SAP Commands
          IES Service Spoke SDP Commands
          Routed VPLS Commands
          IES Service NAT Configuration Commands
        Show Commands
        Clear Commands
        Debug Commands
  VPRN Services
    In This Chapter
    VPRN Service Overview
      Routing Prerequisites
      BGP Support
      IPSec Support
      NAT and VPRN
      Route Distinguishers
        PE-to-CE Route Exchange
          Route Redistribution
          CPE Connectivity Check
      In-Band Management using a VPRN
    VPRN Features
      IP Interfaces
        DHCP
          DHCP Relay
          Local DHCP Server
        IPCP
        Troubleshooting and Fault Detection Services
        IP ECMP Load Balancing
        Proxy ARP
      SAPs
        Encapsulations
        QoS Policies
        CoS Marking for Self-generated Traffic
        QinQ (VPRN)
        Filter Policies on a VPRN SAP
      PE-to-CE Routing Protocols
        Using OSPF in IP VPNs
        TTL Security
      PE-to-PE Tunneling Mechanisms
      Per-VRF Route Limiting
      RIP Metric Propagation in VPRNs
      Spoke SDPs
      Spoke SDP Termination to VPRN
    Configuring a VPRN Service with CLI
    Basic Configuration
    Common Configuration Tasks
    Configuring VPRN Components
      Creating a VPRN Service
      Configuring Global VPRN Parameters
      Configuring Router Interfaces
      Configuring BGP for VPRN
        Configuring VPRN BGP Group and Neighbor Parameters
        VPRN BGP CLI Syntax
      Configuring OSPF for VPRN
      Configuring RIP for VPRN
      Configuring a VPRN Interface
      Configuring VPRN Interface SAP Parameters
      Configuring VPRN Interface Spoke SDP Parameters
      Configuring VRRP
    Service Management Tasks
      Modifying VPRN Service Parameters
      Deleting a VPRN Service
      Disabling a VPRN Service
      Re-enabling a VPRN Service
      Configuring a NAT Zone within VPRN
    VPRN Services Command Reference
      Command Hierarchies
        Configuration Commands
          VPRN Service Configuration Commands
          BGP Commands
          OSPF Commands
          RIP Commands
          VPRN NAT Configuration Commands
          Local DHCP Server Commands
          Interface Commands
          Interface DHCP Commands
          Interface ICMP Commands
          Interface SAP IPSec-Tunnel Commands
          Routed VPLS Commands
          Interface VRRP Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        VPRN Service Configuration Commands
          Generic Commands
          Global Commands
          BGP Commands
          OSPF Commands
          RIP Commands
          VPRN NAT Configuration Commands
          Local DHCP Server Commands
          Interface Commands
          Interface DHCP Commands
          Interface ICMP Commands
          Interface SAP Commands
          Interface Spoke SDP Commands
          Routed VPLS Commands
          Interface VRRP Commands
        Show Service Commands
        Show Router Commands
        Clear Service Commands
        Clear Router Commands
        Debug Service Commands
        Debug Router Commands
  IPSec
    In This Chapter
    IPSec Overview
      IPSec Implementation
        IPSec Overview
        Hardware Support
        IPSec Encryption Features
        IPSec Security Policy, IKE Policy, and IPSec Transform
        Tunnel Group
        Tunnel Interfaces and SAPs
          Public Tunnel SAPs
          Private Tunnel SAPs
          IP Interface Configuration
        IPSec Tunnel Configuration
      Applications
        Metrocell Deployment
        Small Business Deployment
      NAT-Traversal for IKEv2 and IPSec
      BFD over IPSec Tunnel
      QoS for IPSec
        Network and Access Ingress QoS (Decryption QoS)
        Network and Access Egress QoS (Encryption QoS)
      Fragmentation and IP MTU
        Fragmentation Configuration
        Reassembly
      Support for Private VPRN Service Features
      Routing in Private Services
      IPSec on the 10-port 1GigE/1-port 10GigE X-Adapter Card
      IPSec Sequence Number
      PBR and MFC
        PBR
        MFC
      Statistics
    Best Practices Recommendations
      IPSec Best Practices
    Configuration Notes
      Reference Sources
    Configuring IPSec with CLI
    Basic Configuration Overview
    Common Configuration Tasks
      Configuring an IPSec Tunnel Group
      Configuring Router Interfaces for IPSec
      Configuring IPSec Parameters
      Configuring IPSec and IPSec Tunnels in Services
    Service Management Tasks
      Deleting an IPSec IKE Policy or an IPSec Transform
      Deleting a Public IPSec Tunnel SAP and Interface
      Deleting a Private IPSec Tunnel SAP and Interface
      Deleting an IPSec Security Policy
      Deleting an IPSec Tunnel
    IPSec Command Reference
      Command Hierarchies
        IPSec Configuration Commands
          ISA Tunnel Commands
          IPSec Commands
          Service Configuration Commands
          Service Interface Tunnel Commands
          Service Static Route Commands
        Show Commands
        Clear Commands
        Debug Commands
      Command Descriptions
        IPSec Configuration Commands
          Generic Commands
          ISA Tunnel Commands
          Internet Key Exchange (IKE) and Transform Commands
          Service Configuration Commands
          Service Interface Tunnel Commands
        Show Commands
        Clear Commands
        Debug Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
7705 SAR OS System Management Guide R6.1.R4
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR System Management Configuration Process
  Security
    In This Chapter
    Authentication, Authorization, and Accounting
      Authentication
        Local Authentication
        RADIUS Authentication
          RADIUS Server Selection
        TACACS+ Authentication
      Authorization
        Local Authorization
        RADIUS Authorization
        TACACS+ Authorization
      Accounting
        RADIUS Accounting
        TACACS+ Accounting
    Security Controls
      When a Server Does Not Respond
      Access Request Flow
    Vendor-Specific Attributes (VSAs)
      Sample User (VSA) Configuration
        Alcatel-Lucent Dictionary
    Other Security Features
      Secure Shell (SSH)
      CSM Filters and CSM Security
      Exponential Login Backoff
      Encryption
      802.1x Network Access Control
    Configuration Notes
      Reference Sources
    Configuring Security with CLI
    Setting Up Security Attributes
      Configuring Authentication
      Configuring Authorization
      Configuring Accounting
    Security Configurations
    Security Configuration Procedures
      Configuring IPv4 or IPv6 Management Access Filters
      Configuring IPv4 or IPv6 CPM (CSM) Filters
      Configuring Password Management Parameters
      Configuring Profiles
      Configuring Users
      Copying and Overwriting Users and Profiles
        Copying a User
        Copying a Profile
      Configuring SSH
      Configuring Login Controls
      RADIUS Configurations
        Configuring RADIUS Authentication
        Configuring RADIUS Authorization
        Configuring RADIUS Accounting
        Configuring 802.1x RADIUS Policies
      TACACS+ Configurations
        Enabling TACACS+ Authentication
        Configuring TACACS+ Authorization
        Configuring TACACS+ Accounting
    Security Command Reference
      Command Hierarchies
        Configuration Commands
          Security Configuration Commands
          Management Access Filter Commands
          IPv6 Management Access Filter Commands
          CPM Filter Commands
          IPv6 CPM Filter Commands
          Password Commands
          Profile Commands
          User Commands
          RADIUS Commands
          TACACS+ Commands
          802.1x Commands
          SSH Commands
        Login Control Commands
        Show Commands
          Security
          Login Control
        Clear Commands
          Authentication
        Debug Commands
      Command Descriptions
        Configuration Commands
          Generic Security Commands
          Security Commands
          Management Access Filter Commands
          CPM Filter Commands
          Global Password Commands
          Password Commands
          Profile Management Commands
          User Management Commands
          RADIUS Client Commands
          TACACS+ Client Commands
          802.1x Commands
          SSH Commands
          Login Control Commands
        Show Commands
          Security Show Commands
          Login Control Show Commands
        Clear Commands
        Debug Commands
  SNMP
    In This Chapter
    SNMP Overview
      SNMP Architecture
      Management Information Base
      SNMP Versions
      Management Information Access Control
      User-Based Security Model Community Strings
      Views
      Access Groups
      Users
    Which SNMP Version to Use?
    Configuration Notes
      Reference Sources
    Configuring SNMP with CLI
    SNMP Configuration Overview
      Configuring SNMPv1 and SNMPv2c
      Configuring SNMPv3
    Basic SNMP Security Configuration
    Configuring SNMP Components
      Configuring a Community String
      Configuring View Options
      Configuring Access Options
      Configuring USM Community Options
      Configuring Other SNMP Parameters
    SNMP Command Reference
      Command Hierarchies
        Configuration Commands
          SNMP System Commands
          SNMP Security Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          SNMP System Commands
          SNMP Security Commands
        Show Commands
  Event and Accounting Logs
    In This Chapter
    Logging Overview
    Log Destinations
      Console
      Session
      Memory Logs
      Log Files
      SNMP Trap Group
      Syslog
    Event Logs
      Event Sources
      Event Control
      Log Manager and Event Logs
      Event Filter Policies
      Event Log Entries
      Simple Logger Event Throttling
      Default System Log
    Accounting Logs
      Accounting Records
      Accounting Files
      Design Considerations
    Configuration Notes
      Reference Sources
    Configuring Logging with CLI
    Log Configuration Overview
    Log Type
    Basic Event Log Configuration
    Common Configuration Tasks
      Configuring an Event Log
      Configuring a File ID
      Configuring an Accounting Policy
      Configuring Event Control
      Configuring Throttle Rate
      Configuring a Log Filter
      Configuring an SNMP Trap Group
      Configuring a Syslog Target
    Log Management Tasks
      Modifying a Log File
      Deleting a Log File
      Modifying a File ID
      Deleting a File ID
      Modifying a Syslog ID
      Deleting a Syslog ID
      Modifying an SNMP Trap Group
      Deleting an SNMP Trap Group
      Modifying a Log Filter
      Deleting a Log Filter
      Modifying Event Control Parameters
      Returning to the Default Event Control Configuration
    Log Command Reference
      Command Hierarchies
        Configuration Commands
          Accounting Policy Commands
          Event Control Commands
          Log File Commands
          Log Filter Commands
          Syslog Commands
          Logging Destination Commands
          SNMP Trap Groups Commands
        Show Commands
        Clear Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Accounting Policy Commands
          Event Control Commands
          Log File Commands
          Log Filter Commands
          Syslog Commands
          Logging Destination Commands
          SNMP Trap Groups Commands
        Show Commands
        Clear Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
  Preface
    About This Guide
      Audience
      List of Technical Publications
      Technical Support
  Getting Started
    In This Chapter
    Alcatel-Lucent 7705 SAR System Management Configuration Process
  Security
    In This Chapter
    Authentication, Authorization, and Accounting
      Authentication
        Local Authentication
        RADIUS Authentication
          RADIUS Server Selection
        TACACS+ Authentication
      Authorization
        Local Authorization
        RADIUS Authorization
        TACACS+ Authorization
      Accounting
        RADIUS Accounting
        TACACS+ Accounting
    Security Controls
      When a Server Does Not Respond
      Access Request Flow
    Vendor-Specific Attributes (VSAs)
      Sample User (VSA) Configuration
        Alcatel-Lucent Dictionary
    Other Security Features
      Secure Shell (SSH)
      CSM Filters and CSM Security
      Exponential Login Backoff
      Encryption
      802.1x Network Access Control
    Configuration Notes
      Reference Sources
    Configuring Security with CLI
    Setting Up Security Attributes
      Configuring Authentication
      Configuring Authorization
      Configuring Accounting
    Security Configurations
    Security Configuration Procedures
      Configuring IPv4 or IPv6 Management Access Filters
      Configuring IPv4 or IPv6 CPM (CSM) Filters
      Configuring Password Management Parameters
      Configuring Profiles
      Configuring Users
      Copying and Overwriting Users and Profiles
        Copying a User
        Copying a Profile
      Configuring SSH
      Configuring Login Controls
      RADIUS Configurations
        Configuring RADIUS Authentication
        Configuring RADIUS Authorization
        Configuring RADIUS Accounting
        Configuring 802.1x RADIUS Policies
      TACACS+ Configurations
        Enabling TACACS+ Authentication
        Configuring TACACS+ Authorization
        Configuring TACACS+ Accounting
    Security Command Reference
      Command Hierarchies
        Configuration Commands
          Security Configuration Commands
          Management Access Filter Commands
          IPv6 Management Access Filter Commands
          CPM Filter Commands
          IPv6 CPM Filter Commands
          Password Commands
          Profile Commands
          User Commands
          RADIUS Commands
          TACACS+ Commands
          802.1x Commands
          SSH Commands
        Login Control Commands
        Show Commands
          Security
          Login Control
        Clear Commands
          Authentication
        Debug Commands
      Command Descriptions
        Configuration Commands
          Generic Security Commands
          Security Commands
          Management Access Filter Commands
          CPM Filter Commands
          Global Password Commands
          Password Commands
          Profile Management Commands
          User Management Commands
          RADIUS Client Commands
          TACACS+ Client Commands
          802.1x Commands
          SSH Commands
          Login Control Commands
        Show Commands
          Security Show Commands
          Login Control Show Commands
        Clear Commands
        Debug Commands
  SNMP
    In This Chapter
    SNMP Overview
      SNMP Architecture
      Management Information Base
      SNMP Versions
      Management Information Access Control
      User-Based Security Model Community Strings
      Views
      Access Groups
      Users
    Which SNMP Version to Use?
    Configuration Notes
      Reference Sources
    Configuring SNMP with CLI
    SNMP Configuration Overview
      Configuring SNMPv1 and SNMPv2c
      Configuring SNMPv3
    Basic SNMP Security Configuration
    Configuring SNMP Components
      Configuring a Community String
      Configuring View Options
      Configuring Access Options
      Configuring USM Community Options
      Configuring Other SNMP Parameters
    SNMP Command Reference
      Command Hierarchies
        Configuration Commands
          SNMP System Commands
          SNMP Security Commands
        Show Commands
      Command Descriptions
        Configuration Commands
          SNMP System Commands
          SNMP Security Commands
        Show Commands
  Event and Accounting Logs
    In This Chapter
    Logging Overview
    Log Destinations
      Console
      Session
      Memory Logs
      Log Files
      SNMP Trap Group
      Syslog
    Event Logs
      Event Sources
      Event Control
      Log Manager and Event Logs
      Event Filter Policies
      Event Log Entries
      Simple Logger Event Throttling
      Default System Log
    Accounting Logs
      Accounting Records
      Accounting Files
      Design Considerations
    Configuration Notes
      Reference Sources
    Configuring Logging with CLI
    Log Configuration Overview
    Log Type
    Basic Event Log Configuration
    Common Configuration Tasks
      Configuring an Event Log
      Configuring a File ID
      Configuring an Accounting Policy
      Configuring Event Control
      Configuring Throttle Rate
      Configuring a Log Filter
      Configuring an SNMP Trap Group
      Configuring a Syslog Target
    Log Management Tasks
      Modifying a Log File
      Deleting a Log File
      Modifying a File ID
      Deleting a File ID
      Modifying a Syslog ID
      Deleting a Syslog ID
      Modifying an SNMP Trap Group
      Deleting an SNMP Trap Group
      Modifying a Log Filter
      Deleting a Log Filter
      Modifying Event Control Parameters
      Returning to the Default Event Control Configuration
    Log Command Reference
      Command Hierarchies
        Configuration Commands
          Accounting Policy Commands
          Event Control Commands
          Log File Commands
          Log Filter Commands
          Syslog Commands
          Logging Destination Commands
          SNMP Trap Groups Commands
        Show Commands
        Clear Commands
      Command Descriptions
        Configuration Commands
          Generic Commands
          Accounting Policy Commands
          Event Control Commands
          Log File Commands
          Log Filter Commands
          Syslog Commands
          Logging Destination Commands
          SNMP Trap Groups Commands
        Show Commands
        Clear Commands
  List of Acronyms
  Standards and Protocol Support
  Customer documentation and product support
7705 SAR Quick Reference Cards, Release 6.1
  7705 SAR Installation, Provisioning, and Commissioning Checklist, Release 6.1
  7705 SAR Card and Module Support, Release 6.1 Quick Reference Card
  7705 SAR Command Line Interface Quick Reference Card
  7705 SAR Installation, Provisioning, and Commissioning Checklist, Release 6.1
  7705 SAR Card and Module Support, Release 6.1 Quick Reference Card
  7705 SAR Command Line Interface Quick Reference Card